From baf67741bf52b985e318bed3c4acadcda5351e08 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 8 Dec 2009 15:49:48 -0500 Subject: USB: power management documentation update This patch (as1313) updates the documentation concerning USB power management. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- Documentation/ABI/testing/sysfs-bus-usb | 18 ++++++++------- Documentation/usb/power-management.txt | 41 ++++++++++++--------------------- 2 files changed, 25 insertions(+), 34 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index deb6b489e4e..a07c0f366f9 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -21,25 +21,27 @@ Contact: Alan Stern Description: Each USB device directory will contain a file named power/level. This file holds a power-level setting for - the device, one of "on", "auto", or "suspend". + the device, either "on" or "auto". "on" means that the device is not allowed to autosuspend, although normal suspends for system sleep will still be honored. "auto" means the device will autosuspend and autoresume in the usual manner, according to the - capabilities of its driver. "suspend" means the device - is forced into a suspended state and it will not autoresume - in response to I/O requests. However remote-wakeup requests - from the device may still be enabled (the remote-wakeup - setting is controlled separately by the power/wakeup - attribute). + capabilities of its driver. During normal use, devices should be left in the "auto" - level. The other levels are meant for administrative uses. + level. The "on" level is meant for administrative uses. If you want to suspend a device immediately but leave it free to wake up in response to I/O requests, you should write "0" to power/autosuspend. + Device not capable of proper suspend and resume should be + left in the "on" level. Although the USB spec requires + devices to support suspend/resume, many of them do not. + In fact so many don't that by default, the USB core + initializes all non-hub devices in the "on" level. Some + drivers may change this setting when they are bound. + What: /sys/bus/usb/devices/.../power/persist Date: May 2007 KernelVersion: 2.6.23 diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt index c7c1dc2f801..3bf6818c8cf 100644 --- a/Documentation/usb/power-management.txt +++ b/Documentation/usb/power-management.txt @@ -71,12 +71,10 @@ being accessed through sysfs, then it definitely is idle. Forms of dynamic PM ------------------- -Dynamic suspends can occur in two ways: manual and automatic. -"Manual" means that the user has told the kernel to suspend a device, -whereas "automatic" means that the kernel has decided all by itself to -suspend a device. Automatic suspend is called "autosuspend" for -short. In general, a device won't be autosuspended unless it has been -idle for some minimum period of time, the so-called idle-delay time. +Dynamic suspends occur when the kernel decides to suspend an idle +device. This is called "autosuspend" for short. In general, a device +won't be autosuspended unless it has been idle for some minimum period +of time, the so-called idle-delay time. Of course, nothing the kernel does on its own initiative should prevent the computer or its devices from working properly. If a @@ -96,10 +94,11 @@ idle. We can categorize power management events in two broad classes: external and internal. External events are those triggered by some agent outside the USB stack: system suspend/resume (triggered by -userspace), manual dynamic suspend/resume (also triggered by -userspace), and remote wakeup (triggered by the device). Internal -events are those triggered within the USB stack: autosuspend and -autoresume. +userspace), manual dynamic resume (also triggered by userspace), and +remote wakeup (triggered by the device). Internal events are those +triggered within the USB stack: autosuspend and autoresume. Note that +all dynamic suspend events are internal; external agents are not +allowed to issue dynamic suspends. The user interface for dynamic PM @@ -145,9 +144,9 @@ relevant attribute files are: wakeup, level, and autosuspend. number of seconds the device should remain idle before the kernel will autosuspend it (the idle-delay time). The default is 2. 0 means to autosuspend as soon as - the device becomes idle, and -1 means never to - autosuspend. You can write a number to the file to - change the autosuspend idle-delay time. + the device becomes idle, and negative values mean + never to autosuspend. You can write a number to the + file to change the autosuspend idle-delay time. Writing "-1" to power/autosuspend and writing "on" to power/level do essentially the same thing -- they both prevent the device from being @@ -377,9 +376,9 @@ the device hasn't been idle for long enough, a delayed workqueue routine is automatically set up to carry out the operation when the autosuspend idle-delay has expired. -Autoresume attempts also can fail. This will happen if power/level is -set to "suspend" or if the device doesn't manage to resume properly. -Unlike autosuspend, there's no delay for an autoresume. +Autoresume attempts also can fail, although failure would mean that +the device is no longer present or operating properly. Unlike +autosuspend, there's no delay for an autoresume. Other parts of the driver interface @@ -527,13 +526,3 @@ succeed, it may still remain active and thus cause the system to resume as soon as the system suspend is complete. Or the remote wakeup may fail and get lost. Which outcome occurs depends on timing and on the hardware and firmware design. - -More interestingly, a device might undergo a manual resume or -autoresume during system suspend. With current kernels this shouldn't -happen, because manual resumes must be initiated by userspace and -autoresumes happen in response to I/O requests, but all user processes -and I/O should be quiescent during a system suspend -- thanks to the -freezer. However there are plans to do away with the freezer, which -would mean these things would become possible. If and when this comes -about, the USB core will carefully arrange matters so that either type -of resume will block until the entire system has resumed. -- cgit v1.2.3 From 8d8558d10806b7e805cb80df867ebb0a453d4765 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 8 Dec 2009 15:50:41 -0500 Subject: USB: rename usb_configure_device This patch (as1314) renames usb_configure_device() and usb_configure_device_otg() in the hub driver. Neither name is appropriate because these routines enumerate devices, they don't configure them. That's handled by usb_choose_configuration() and usb_set_configuration(). Signed-off-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 06af970e106..28738fa17af 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1658,12 +1658,12 @@ static inline void announce_device(struct usb_device *udev) { } #endif /** - * usb_configure_device_otg - FIXME (usbcore-internal) + * usb_enumerate_device_otg - FIXME (usbcore-internal) * @udev: newly addressed device (in ADDRESS state) * - * Do configuration for On-The-Go devices + * Finish enumeration for On-The-Go devices */ -static int usb_configure_device_otg(struct usb_device *udev) +static int usb_enumerate_device_otg(struct usb_device *udev) { int err = 0; @@ -1734,7 +1734,7 @@ fail: /** - * usb_configure_device - Detect and probe device intfs/otg (usbcore-internal) + * usb_enumerate_device - Read device configs/intfs/otg (usbcore-internal) * @udev: newly addressed device (in ADDRESS state) * * This is only called by usb_new_device() and usb_authorize_device() @@ -1745,7 +1745,7 @@ fail: * the string descriptors, as they will be errored out by the device * until it has been authorized. */ -static int usb_configure_device(struct usb_device *udev) +static int usb_enumerate_device(struct usb_device *udev) { int err; @@ -1769,7 +1769,7 @@ static int usb_configure_device(struct usb_device *udev) udev->descriptor.iManufacturer); udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber); } - err = usb_configure_device_otg(udev); + err = usb_enumerate_device_otg(udev); fail: return err; } @@ -1779,8 +1779,8 @@ fail: * usb_new_device - perform initial device setup (usbcore-internal) * @udev: newly addressed device (in ADDRESS state) * - * This is called with devices which have been enumerated, but not yet - * configured. The device descriptor is available, but not descriptors + * This is called with devices which have been detected but not fully + * enumerated. The device descriptor is available, but not descriptors * for any device configuration. The caller must have locked either * the parent hub (if udev is a normal device) or else the * usb_bus_list_lock (if udev is a root hub). The parent's pointer to @@ -1803,8 +1803,8 @@ int usb_new_device(struct usb_device *udev) if (udev->parent) usb_autoresume_device(udev->parent); - usb_detect_quirks(udev); /* Determine quirks */ - err = usb_configure_device(udev); /* detect & probe dev/intfs */ + usb_detect_quirks(udev); + err = usb_enumerate_device(udev); /* Read descriptors */ if (err < 0) goto fail; dev_dbg(&udev->dev, "udev %d, busnum %d, minor = %d\n", @@ -1895,9 +1895,9 @@ int usb_authorize_device(struct usb_device *usb_dev) goto error_device_descriptor; } usb_dev->authorized = 1; - result = usb_configure_device(usb_dev); + result = usb_enumerate_device(usb_dev); if (result < 0) - goto error_configure; + goto error_enumerate; /* Choose and set the configuration. This registers the interfaces * with the driver core and lets interface drivers bind to them. */ @@ -1912,7 +1912,7 @@ int usb_authorize_device(struct usb_device *usb_dev) } } dev_info(&usb_dev->dev, "authorized to connect\n"); -error_configure: +error_enumerate: error_device_descriptor: error_autoresume: out_authorized: -- cgit v1.2.3 From da307123c621b01cce147a4be313d8a754674f63 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 8 Dec 2009 15:54:44 -0500 Subject: USB: fix bugs in usb_(de)authorize_device This patch (as1315) fixes some bugs in the USB core authorization code: usb_deauthorize_device() should deallocate the device strings instead of leaking them, and it should invoke usb_destroy_configuration() (which does proper reference counting) instead of freeing the config information directly. usb_authorize_device() shouldn't change the device strings until it knows that the authorization will succeed, and it should autosuspend the device at the end (having autoresumed the device at the start). Because the device strings can be changed, the sysfs routines to display the strings must protect the string pointers by locking the device. Signed-off-by: Alan Stern CC: Inaky Perez-Gonzalez Acked-by: David Vrabel Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 32 ++++++++++++++++++++------------ drivers/usb/core/sysfs.c | 6 +++++- 2 files changed, 25 insertions(+), 13 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 28738fa17af..0cec6caf6e9 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1849,21 +1849,23 @@ fail: */ int usb_deauthorize_device(struct usb_device *usb_dev) { - unsigned cnt; usb_lock_device(usb_dev); if (usb_dev->authorized == 0) goto out_unauthorized; + usb_dev->authorized = 0; usb_set_configuration(usb_dev, -1); + + kfree(usb_dev->product); usb_dev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL); + kfree(usb_dev->manufacturer); usb_dev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL); + kfree(usb_dev->serial); usb_dev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL); - kfree(usb_dev->config); - usb_dev->config = NULL; - for (cnt = 0; cnt < usb_dev->descriptor.bNumConfigurations; cnt++) - kfree(usb_dev->rawdescriptors[cnt]); + + usb_destroy_configuration(usb_dev); usb_dev->descriptor.bNumConfigurations = 0; - kfree(usb_dev->rawdescriptors); + out_unauthorized: usb_unlock_device(usb_dev); return 0; @@ -1873,15 +1875,11 @@ out_unauthorized: int usb_authorize_device(struct usb_device *usb_dev) { int result = 0, c; + usb_lock_device(usb_dev); if (usb_dev->authorized == 1) goto out_authorized; - kfree(usb_dev->product); - usb_dev->product = NULL; - kfree(usb_dev->manufacturer); - usb_dev->manufacturer = NULL; - kfree(usb_dev->serial); - usb_dev->serial = NULL; + result = usb_autoresume_device(usb_dev); if (result < 0) { dev_err(&usb_dev->dev, @@ -1894,6 +1892,14 @@ int usb_authorize_device(struct usb_device *usb_dev) "authorization: %d\n", result); goto error_device_descriptor; } + + kfree(usb_dev->product); + usb_dev->product = NULL; + kfree(usb_dev->manufacturer); + usb_dev->manufacturer = NULL; + kfree(usb_dev->serial); + usb_dev->serial = NULL; + usb_dev->authorized = 1; result = usb_enumerate_device(usb_dev); if (result < 0) @@ -1912,8 +1918,10 @@ int usb_authorize_device(struct usb_device *usb_dev) } } dev_info(&usb_dev->dev, "authorized to connect\n"); + error_enumerate: error_device_descriptor: + usb_autosuspend_device(usb_dev); error_autoresume: out_authorized: usb_unlock_device(usb_dev); // complements locktree diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 15477008b63..485edf937f2 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -82,9 +82,13 @@ static ssize_t show_##name(struct device *dev, \ struct device_attribute *attr, char *buf) \ { \ struct usb_device *udev; \ + int retval; \ \ udev = to_usb_device(dev); \ - return sprintf(buf, "%s\n", udev->name); \ + usb_lock_device(udev); \ + retval = sprintf(buf, "%s\n", udev->name); \ + usb_unlock_device(udev); \ + return retval; \ } \ static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL); -- cgit v1.2.3 From ff3b968ceeb73c037cf4759d21923943970f9a7a Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 9 Dec 2009 14:23:32 +0100 Subject: USB: gadget: Use ERR_PTR/IS_ERR Use ERR_PTR and IS_ERR rather than mixing integers and pointers. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression *E; @@ * E < 0 // Signed-off-by: Julia Lawall Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/f_audio.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c index c43c89ffa2c..0f2eee12ee9 100644 --- a/drivers/usb/gadget/f_audio.c +++ b/drivers/usb/gadget/f_audio.c @@ -252,12 +252,12 @@ static struct f_audio_buf *f_audio_buffer_alloc(int buf_size) copy_buf = kzalloc(sizeof *copy_buf, GFP_ATOMIC); if (!copy_buf) - return (struct f_audio_buf *)-ENOMEM; + return ERR_PTR(-ENOMEM); copy_buf->buf = kzalloc(buf_size, GFP_ATOMIC); if (!copy_buf->buf) { kfree(copy_buf); - return (struct f_audio_buf *)-ENOMEM; + return ERR_PTR(-ENOMEM); } return copy_buf; @@ -332,7 +332,7 @@ static int f_audio_out_ep_complete(struct usb_ep *ep, struct usb_request *req) list_add_tail(©_buf->list, &audio->play_queue); schedule_work(&audio->playback_work); copy_buf = f_audio_buffer_alloc(audio_buf_size); - if (copy_buf < 0) + if (IS_ERR(copy_buf)) return -ENOMEM; } @@ -576,6 +576,8 @@ static int f_audio_set_alt(struct usb_function *f, unsigned intf, unsigned alt) usb_ep_enable(out_ep, audio->out_desc); out_ep->driver_data = audio; audio->copy_buf = f_audio_buffer_alloc(audio_buf_size); + if (IS_ERR(audio->copy_buf)) + return -ENOMEM; /* * allocate a bunch of read buffers -- cgit v1.2.3 From 179192d38e8906f00479ec944c15b685400232b0 Mon Sep 17 00:00:00 2001 From: Bill Gatliff Date: Fri, 18 Dec 2009 09:57:22 -0600 Subject: USB: Fix double-linking of drivers/usb/otg when ULPI is selected This patch corrects a problem where drivers/usb/otg is linked twice if CONFIG_USB_ULPI is selected, resulting in a build error (symbol conflict). The files in that directory are properly linked already as part of CONFIG_USB, and need not be indicated specifically for CONFIG_USB_ULPI. Signed-off-by: Bill Gatliff Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/Makefile | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 473aa1a20de..be3c9b80bc9 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -44,5 +44,3 @@ obj-y += early/ obj-$(CONFIG_USB_ATM) += atm/ obj-$(CONFIG_USB_SPEEDTOUCH) += atm/ - -obj-$(CONFIG_USB_ULPI) += otg/ -- cgit v1.2.3 From 27f1281d5f72e4f161e215ccad3d7d86b9e624a9 Mon Sep 17 00:00:00 2001 From: Blaise Gassend Date: Fri, 18 Dec 2009 15:23:38 -0800 Subject: USB: serial: Extra device/vendor ID for mos7840 driver Signed-off-by: Blaise Gassend Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/mos7840.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 485fa9c5b10..2cfe2451ed9 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -127,8 +127,9 @@ #define BANDB_DEVICE_ID_US9ML2_4 0xAC30 #define BANDB_DEVICE_ID_USPTL4_2 0xAC31 #define BANDB_DEVICE_ID_USPTL4_4 0xAC32 -#define BANDB_DEVICE_ID_USOPTL4_2 0xAC42 -#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44 +#define BANDB_DEVICE_ID_USOPTL4_2 0xAC42 +#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44 +#define BANDB_DEVICE_ID_USOPTL2_4 0xAC24 /* This driver also supports * ATEN UC2324 device using Moschip MCS7840 @@ -191,6 +192,7 @@ static struct usb_device_id moschip_port_id_table[] = { {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)}, {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)}, {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)}, {} /* terminating entry */ @@ -207,6 +209,7 @@ static __devinitdata struct usb_device_id moschip_id_table_combined[] = { {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)}, {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)}, {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)}, {} /* terminating entry */ -- cgit v1.2.3 From ac06c06770bb8761b1f1f9bdf2f5420fa6d3e9fa Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 21 Dec 2009 15:36:44 -0800 Subject: USB: emi62: fix crash when trying to load EMI 6|2 firmware While converting emi62 to use request_firmware(), the driver was also changed to use the ihex helper functions. However, this broke the loading of the FPGA firmware because the code tries to access the addr field of the EOF record which works with a plain array that has an empty last record but not with the ihex helper functions where the end of the data is signaled with a NULL record pointer, resulting in: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] emi62_load_firmware+0x33c/0x740 [emi62] This can be fixed by changing the loop condition to test the return value of ihex_next_binrec() directly (like in emi26.c). Signed-off-by: Clemens Ladisch Reported-and-tested-by: Der Mickster Acked-by: David Woodhouse Cc: stable Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/emi62.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c index 602ee05ba9f..59860b32853 100644 --- a/drivers/usb/misc/emi62.c +++ b/drivers/usb/misc/emi62.c @@ -167,7 +167,7 @@ static int emi62_load_firmware (struct usb_device *dev) err("%s - error loading firmware: error = %d", __func__, err); goto wraperr; } - } while (i > 0); + } while (rec); /* Assert reset (stop the CPU in the EMI) */ err = emi62_set_reset(dev,1); -- cgit v1.2.3 From 40b52371be92cf9990de162e4c7b4fd9160150a7 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Fri, 20 Nov 2009 13:50:53 +0000 Subject: USB: fix section mismatch in early ehci dbgp Commit 917778267fbe67703ab7d5c6f0b7a05d4c3df485 removed __init from ehci_wait_for_port(), but left it in place on ehci_reset_port(), which is being called from the former function. Signed-off-by: Jan Beulich Acked-by: Jason Wessel Signed-off-by: Greg Kroah-Hartman --- drivers/usb/early/ehci-dbgp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index 1206a26ef89..2958a1271b2 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -613,7 +613,7 @@ err: } EXPORT_SYMBOL_GPL(dbgp_external_startup); -static int __init ehci_reset_port(int port) +static int ehci_reset_port(int port) { u32 portsc; u32 delay_time, delay; -- cgit v1.2.3 From 4b372072b554723b508e53249dd1b594ad93fbc2 Mon Sep 17 00:00:00 2001 From: pancho horrillo Date: Wed, 2 Dec 2009 20:19:42 +0100 Subject: USB: add device ID for Apple Cinema Display 23in 2007 Hi! $ lsusb -v Bus 001 Device 008: ID 05ac:921c Apple, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x05ac Apple, Inc. idProduct 0x921c bcdDevice 1.15 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 92 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 16 Signed-off-by: pancho horrillo Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/appledisplay.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index 1d8e39a557d..8dc4afa38b8 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -60,6 +60,7 @@ static struct usb_device_id appledisplay_table [] = { { APPLEDISPLAY_DEVICE(0x9218) }, { APPLEDISPLAY_DEVICE(0x9219) }, + { APPLEDISPLAY_DEVICE(0x921c) }, { APPLEDISPLAY_DEVICE(0x921d) }, /* Terminating entry */ -- cgit v1.2.3 From 70445ae6c669865e464307a155e881096e4a0ae7 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 13 Dec 2009 10:17:16 -0800 Subject: USB core: fix recent kernel-doc warnings Fix new kernel-doc warnings in usb core: Warning(drivers/usb/core/usb.c:79): No description found for parameter 'config' Warning(drivers/usb/core/usb.c:79): No description found for parameter 'iface_num' Warning(drivers/usb/core/usb.c:79): No description found for parameter 'alt_num' Warning(drivers/usb/core/hcd.c:1622): No description found for parameter 'udev' Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 4 +++- drivers/usb/core/usb.c | 6 +++--- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 6dac3b802d4..0495fa65122 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1597,7 +1597,9 @@ rescan: } /** - * Check whether a new bandwidth setting exceeds the bus bandwidth. + * usb_hcd_alloc_bandwidth - check whether a new bandwidth setting exceeds + * the bus bandwidth + * @udev: target &usb_device * @new_config: new configuration to install * @cur_alt: the current alternate interface setting * @new_alt: alternate interface setting that is being installed diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 2fb42043b30..0daff0d968b 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -66,9 +66,9 @@ MODULE_PARM_DESC(autosuspend, "default autosuspend delay"); /** * usb_find_alt_setting() - Given a configuration, find the alternate setting * for the given interface. - * @config - the configuration to search (not necessarily the current config). - * @iface_num - interface number to search in - * @alt_num - alternate interface setting number to search for. + * @config: the configuration to search (not necessarily the current config). + * @iface_num: interface number to search in + * @alt_num: alternate interface setting number to search for. * * Search the configuration's interface cache for the given alt setting. */ -- cgit v1.2.3 From 31844d55800e1b93fe75c4d6188a4a44db2e1bbe Mon Sep 17 00:00:00 2001 From: Andreas Mohr Date: Wed, 16 Dec 2009 21:45:10 +0100 Subject: USB: ftdi_sio: isolate all device IDs to new ftdi_sio_ids.h header This is a strictly move-only patch to relocate all FTDI device product ID definitions to their own ftdi_sio_ids.h header (following the usual *_ids.h kernel tree convention, too), thus correcting the slightly too messy appearance (crucial driver defines were stuck somewhere in the decaying middle swamp of the huge existing header). Compile-tested, based on latest mainline git. Signed-off-by: Andreas Mohr Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 959 +------------------------------------- drivers/usb/serial/ftdi_sio_ids.h | 959 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 964 insertions(+), 955 deletions(-) create mode 100644 drivers/usb/serial/ftdi_sio_ids.h diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index f99498fca99..216f187582a 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -44,6 +44,7 @@ #include #include #include "ftdi_sio.h" +#include "ftdi_sio_ids.h" /* * Version Information diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 4586a24fafb..b0e0d64f822 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -1,7 +1,10 @@ /* - * Definitions for the FTDI USB Single Port Serial Converter - + * Driver definitions for the FTDI USB Single Port Serial Converter - * known as FTDI_SIO (Serial Input/Output application of the chipset) * + * For USB vendor/product IDs (VID/PID), please see ftdi_sio_ids.h + * + * * The example I have is known as the USC-1000 which is available from * http://www.dse.co.nz - cat no XH4214 It looks similar to this: * http://www.dansdata.com/usbser.htm but I can't be sure There are other @@ -17,880 +20,7 @@ * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the * FTDI_SIO implementation. * - * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais - * from Rudolf Gugler - * - */ - -#define FTDI_VID 0x0403 /* Vendor Id */ -#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ -#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */ -#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ -#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ -#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ -#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */ -#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ -#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ -#define FTDI_NF_RIC_PID 0x0001 /* Product Id */ -#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */ - -/* Larsen and Brusgaard AltiTrack/USBtrack */ -#define LARSENBRUSGAARD_VID 0x0FD8 -#define LB_ALTITRACK_PID 0x0001 - -/* www.canusb.com Lawicel CANUSB device */ -#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ - -/* AlphaMicro Components AMC-232USB01 device */ -#define FTDI_AMC232_PID 0xFF00 /* Product Id */ - -/* www.candapter.com Ewert Energy Systems CANdapter device */ -#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ - -/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */ -/* the VID is the standard ftdi vid (FTDI_VID) */ -#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */ -#define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */ -#define FTDI_SCS_DEVICE_2_PID 0xD012 -#define FTDI_SCS_DEVICE_3_PID 0xD013 -#define FTDI_SCS_DEVICE_4_PID 0xD014 -#define FTDI_SCS_DEVICE_5_PID 0xD015 -#define FTDI_SCS_DEVICE_6_PID 0xD016 -#define FTDI_SCS_DEVICE_7_PID 0xD017 - -/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */ -#define FTDI_ACTZWAVE_PID 0xF2D0 - - -/* www.starting-point-systems.com µChameleon device */ -#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ - -/* www.irtrans.de device */ -#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ - - -/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ -#define FTDI_TTUSB_PID 0xFF20 /* Product Id */ - -/* iPlus device */ -#define FTDI_IPLUS_PID 0xD070 /* Product Id */ -#define FTDI_IPLUS2_PID 0xD071 /* Product Id */ - -/* DMX4ALL DMX Interfaces */ -#define FTDI_DMX4ALL 0xC850 - -/* OpenDCC (www.opendcc.de) product id */ -#define FTDI_OPENDCC_PID 0xBFD8 -#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9 -#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA -#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB - -/* Sprog II (Andrew Crosland's SprogII DCC interface) */ -#define FTDI_SPROG_II 0xF0C8 - -/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ -/* they use the ftdi chipset for the USB interface and the vendor id is the same */ -#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ -#define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ -#define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ -#define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ -#define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ -#define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ -#define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ -#define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ - -/* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */ -/* broadband internet service. The following PID is exhibited by the usb device supplied */ -/* (the VID is the standard ftdi vid (FTDI_VID) */ -#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ - -/* - * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device - * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen) - * (the VID is the standard ftdi vid (FTDI_VID) */ -#define FTDI_PCDJ_DAC2_PID 0xFA88 - -/* - * The following are the values for the Matrix Orbital LCD displays, - * which are the FT232BM ( similar to the 8U232AM ) - */ -#define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ - -/* OOCDlink by Joern Kaipf - * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ -#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ - -/* - * The following are the values for the Matrix Orbital FTDI Range - * Anything in this range will use an FT232RL. - */ -#define MTXORB_VID 0x1B3D -#define MTXORB_FTDI_RANGE_0100_PID 0x0100 -#define MTXORB_FTDI_RANGE_0101_PID 0x0101 -#define MTXORB_FTDI_RANGE_0102_PID 0x0102 -#define MTXORB_FTDI_RANGE_0103_PID 0x0103 -#define MTXORB_FTDI_RANGE_0104_PID 0x0104 -#define MTXORB_FTDI_RANGE_0105_PID 0x0105 -#define MTXORB_FTDI_RANGE_0106_PID 0x0106 -#define MTXORB_FTDI_RANGE_0107_PID 0x0107 -#define MTXORB_FTDI_RANGE_0108_PID 0x0108 -#define MTXORB_FTDI_RANGE_0109_PID 0x0109 -#define MTXORB_FTDI_RANGE_010A_PID 0x010A -#define MTXORB_FTDI_RANGE_010B_PID 0x010B -#define MTXORB_FTDI_RANGE_010C_PID 0x010C -#define MTXORB_FTDI_RANGE_010D_PID 0x010D -#define MTXORB_FTDI_RANGE_010E_PID 0x010E -#define MTXORB_FTDI_RANGE_010F_PID 0x010F -#define MTXORB_FTDI_RANGE_0110_PID 0x0110 -#define MTXORB_FTDI_RANGE_0111_PID 0x0111 -#define MTXORB_FTDI_RANGE_0112_PID 0x0112 -#define MTXORB_FTDI_RANGE_0113_PID 0x0113 -#define MTXORB_FTDI_RANGE_0114_PID 0x0114 -#define MTXORB_FTDI_RANGE_0115_PID 0x0115 -#define MTXORB_FTDI_RANGE_0116_PID 0x0116 -#define MTXORB_FTDI_RANGE_0117_PID 0x0117 -#define MTXORB_FTDI_RANGE_0118_PID 0x0118 -#define MTXORB_FTDI_RANGE_0119_PID 0x0119 -#define MTXORB_FTDI_RANGE_011A_PID 0x011A -#define MTXORB_FTDI_RANGE_011B_PID 0x011B -#define MTXORB_FTDI_RANGE_011C_PID 0x011C -#define MTXORB_FTDI_RANGE_011D_PID 0x011D -#define MTXORB_FTDI_RANGE_011E_PID 0x011E -#define MTXORB_FTDI_RANGE_011F_PID 0x011F -#define MTXORB_FTDI_RANGE_0120_PID 0x0120 -#define MTXORB_FTDI_RANGE_0121_PID 0x0121 -#define MTXORB_FTDI_RANGE_0122_PID 0x0122 -#define MTXORB_FTDI_RANGE_0123_PID 0x0123 -#define MTXORB_FTDI_RANGE_0124_PID 0x0124 -#define MTXORB_FTDI_RANGE_0125_PID 0x0125 -#define MTXORB_FTDI_RANGE_0126_PID 0x0126 -#define MTXORB_FTDI_RANGE_0127_PID 0x0127 -#define MTXORB_FTDI_RANGE_0128_PID 0x0128 -#define MTXORB_FTDI_RANGE_0129_PID 0x0129 -#define MTXORB_FTDI_RANGE_012A_PID 0x012A -#define MTXORB_FTDI_RANGE_012B_PID 0x012B -#define MTXORB_FTDI_RANGE_012C_PID 0x012C -#define MTXORB_FTDI_RANGE_012D_PID 0x012D -#define MTXORB_FTDI_RANGE_012E_PID 0x012E -#define MTXORB_FTDI_RANGE_012F_PID 0x012F -#define MTXORB_FTDI_RANGE_0130_PID 0x0130 -#define MTXORB_FTDI_RANGE_0131_PID 0x0131 -#define MTXORB_FTDI_RANGE_0132_PID 0x0132 -#define MTXORB_FTDI_RANGE_0133_PID 0x0133 -#define MTXORB_FTDI_RANGE_0134_PID 0x0134 -#define MTXORB_FTDI_RANGE_0135_PID 0x0135 -#define MTXORB_FTDI_RANGE_0136_PID 0x0136 -#define MTXORB_FTDI_RANGE_0137_PID 0x0137 -#define MTXORB_FTDI_RANGE_0138_PID 0x0138 -#define MTXORB_FTDI_RANGE_0139_PID 0x0139 -#define MTXORB_FTDI_RANGE_013A_PID 0x013A -#define MTXORB_FTDI_RANGE_013B_PID 0x013B -#define MTXORB_FTDI_RANGE_013C_PID 0x013C -#define MTXORB_FTDI_RANGE_013D_PID 0x013D -#define MTXORB_FTDI_RANGE_013E_PID 0x013E -#define MTXORB_FTDI_RANGE_013F_PID 0x013F -#define MTXORB_FTDI_RANGE_0140_PID 0x0140 -#define MTXORB_FTDI_RANGE_0141_PID 0x0141 -#define MTXORB_FTDI_RANGE_0142_PID 0x0142 -#define MTXORB_FTDI_RANGE_0143_PID 0x0143 -#define MTXORB_FTDI_RANGE_0144_PID 0x0144 -#define MTXORB_FTDI_RANGE_0145_PID 0x0145 -#define MTXORB_FTDI_RANGE_0146_PID 0x0146 -#define MTXORB_FTDI_RANGE_0147_PID 0x0147 -#define MTXORB_FTDI_RANGE_0148_PID 0x0148 -#define MTXORB_FTDI_RANGE_0149_PID 0x0149 -#define MTXORB_FTDI_RANGE_014A_PID 0x014A -#define MTXORB_FTDI_RANGE_014B_PID 0x014B -#define MTXORB_FTDI_RANGE_014C_PID 0x014C -#define MTXORB_FTDI_RANGE_014D_PID 0x014D -#define MTXORB_FTDI_RANGE_014E_PID 0x014E -#define MTXORB_FTDI_RANGE_014F_PID 0x014F -#define MTXORB_FTDI_RANGE_0150_PID 0x0150 -#define MTXORB_FTDI_RANGE_0151_PID 0x0151 -#define MTXORB_FTDI_RANGE_0152_PID 0x0152 -#define MTXORB_FTDI_RANGE_0153_PID 0x0153 -#define MTXORB_FTDI_RANGE_0154_PID 0x0154 -#define MTXORB_FTDI_RANGE_0155_PID 0x0155 -#define MTXORB_FTDI_RANGE_0156_PID 0x0156 -#define MTXORB_FTDI_RANGE_0157_PID 0x0157 -#define MTXORB_FTDI_RANGE_0158_PID 0x0158 -#define MTXORB_FTDI_RANGE_0159_PID 0x0159 -#define MTXORB_FTDI_RANGE_015A_PID 0x015A -#define MTXORB_FTDI_RANGE_015B_PID 0x015B -#define MTXORB_FTDI_RANGE_015C_PID 0x015C -#define MTXORB_FTDI_RANGE_015D_PID 0x015D -#define MTXORB_FTDI_RANGE_015E_PID 0x015E -#define MTXORB_FTDI_RANGE_015F_PID 0x015F -#define MTXORB_FTDI_RANGE_0160_PID 0x0160 -#define MTXORB_FTDI_RANGE_0161_PID 0x0161 -#define MTXORB_FTDI_RANGE_0162_PID 0x0162 -#define MTXORB_FTDI_RANGE_0163_PID 0x0163 -#define MTXORB_FTDI_RANGE_0164_PID 0x0164 -#define MTXORB_FTDI_RANGE_0165_PID 0x0165 -#define MTXORB_FTDI_RANGE_0166_PID 0x0166 -#define MTXORB_FTDI_RANGE_0167_PID 0x0167 -#define MTXORB_FTDI_RANGE_0168_PID 0x0168 -#define MTXORB_FTDI_RANGE_0169_PID 0x0169 -#define MTXORB_FTDI_RANGE_016A_PID 0x016A -#define MTXORB_FTDI_RANGE_016B_PID 0x016B -#define MTXORB_FTDI_RANGE_016C_PID 0x016C -#define MTXORB_FTDI_RANGE_016D_PID 0x016D -#define MTXORB_FTDI_RANGE_016E_PID 0x016E -#define MTXORB_FTDI_RANGE_016F_PID 0x016F -#define MTXORB_FTDI_RANGE_0170_PID 0x0170 -#define MTXORB_FTDI_RANGE_0171_PID 0x0171 -#define MTXORB_FTDI_RANGE_0172_PID 0x0172 -#define MTXORB_FTDI_RANGE_0173_PID 0x0173 -#define MTXORB_FTDI_RANGE_0174_PID 0x0174 -#define MTXORB_FTDI_RANGE_0175_PID 0x0175 -#define MTXORB_FTDI_RANGE_0176_PID 0x0176 -#define MTXORB_FTDI_RANGE_0177_PID 0x0177 -#define MTXORB_FTDI_RANGE_0178_PID 0x0178 -#define MTXORB_FTDI_RANGE_0179_PID 0x0179 -#define MTXORB_FTDI_RANGE_017A_PID 0x017A -#define MTXORB_FTDI_RANGE_017B_PID 0x017B -#define MTXORB_FTDI_RANGE_017C_PID 0x017C -#define MTXORB_FTDI_RANGE_017D_PID 0x017D -#define MTXORB_FTDI_RANGE_017E_PID 0x017E -#define MTXORB_FTDI_RANGE_017F_PID 0x017F -#define MTXORB_FTDI_RANGE_0180_PID 0x0180 -#define MTXORB_FTDI_RANGE_0181_PID 0x0181 -#define MTXORB_FTDI_RANGE_0182_PID 0x0182 -#define MTXORB_FTDI_RANGE_0183_PID 0x0183 -#define MTXORB_FTDI_RANGE_0184_PID 0x0184 -#define MTXORB_FTDI_RANGE_0185_PID 0x0185 -#define MTXORB_FTDI_RANGE_0186_PID 0x0186 -#define MTXORB_FTDI_RANGE_0187_PID 0x0187 -#define MTXORB_FTDI_RANGE_0188_PID 0x0188 -#define MTXORB_FTDI_RANGE_0189_PID 0x0189 -#define MTXORB_FTDI_RANGE_018A_PID 0x018A -#define MTXORB_FTDI_RANGE_018B_PID 0x018B -#define MTXORB_FTDI_RANGE_018C_PID 0x018C -#define MTXORB_FTDI_RANGE_018D_PID 0x018D -#define MTXORB_FTDI_RANGE_018E_PID 0x018E -#define MTXORB_FTDI_RANGE_018F_PID 0x018F -#define MTXORB_FTDI_RANGE_0190_PID 0x0190 -#define MTXORB_FTDI_RANGE_0191_PID 0x0191 -#define MTXORB_FTDI_RANGE_0192_PID 0x0192 -#define MTXORB_FTDI_RANGE_0193_PID 0x0193 -#define MTXORB_FTDI_RANGE_0194_PID 0x0194 -#define MTXORB_FTDI_RANGE_0195_PID 0x0195 -#define MTXORB_FTDI_RANGE_0196_PID 0x0196 -#define MTXORB_FTDI_RANGE_0197_PID 0x0197 -#define MTXORB_FTDI_RANGE_0198_PID 0x0198 -#define MTXORB_FTDI_RANGE_0199_PID 0x0199 -#define MTXORB_FTDI_RANGE_019A_PID 0x019A -#define MTXORB_FTDI_RANGE_019B_PID 0x019B -#define MTXORB_FTDI_RANGE_019C_PID 0x019C -#define MTXORB_FTDI_RANGE_019D_PID 0x019D -#define MTXORB_FTDI_RANGE_019E_PID 0x019E -#define MTXORB_FTDI_RANGE_019F_PID 0x019F -#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0 -#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1 -#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2 -#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3 -#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4 -#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5 -#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6 -#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7 -#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8 -#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9 -#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA -#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB -#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC -#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD -#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE -#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF -#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0 -#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1 -#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2 -#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3 -#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4 -#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5 -#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6 -#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7 -#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8 -#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9 -#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA -#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB -#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC -#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD -#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE -#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF -#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0 -#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1 -#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2 -#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3 -#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4 -#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5 -#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6 -#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7 -#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8 -#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9 -#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA -#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB -#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC -#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD -#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE -#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF -#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0 -#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1 -#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2 -#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3 -#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4 -#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5 -#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6 -#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7 -#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8 -#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9 -#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA -#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB -#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC -#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD -#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE -#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF -#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0 -#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1 -#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2 -#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3 -#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4 -#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5 -#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6 -#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7 -#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8 -#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9 -#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA -#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB -#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC -#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED -#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE -#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF -#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0 -#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1 -#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2 -#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3 -#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4 -#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5 -#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6 -#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7 -#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8 -#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9 -#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA -#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB -#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC -#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD -#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE -#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF - - - -/* Interbiometrics USB I/O Board */ -/* Developed for Interbiometrics by Rudolf Gugler */ -#define INTERBIOMETRICS_VID 0x1209 -#define INTERBIOMETRICS_IOBOARD_PID 0x1002 -#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 - -/* - * The following are the values for the Perle Systems - * UltraPort USB serial converters - */ -#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ - -/* - * The following are the values for the Sealevel SeaLINK+ adapters. - * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and - * removed some PIDs that don't seem to match any existing products.) - */ -#define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ -#define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ -#define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ -#define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ -#define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ -#define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */ -#define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ -#define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ -#define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ -#define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ -#define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ -#define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ -#define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ -#define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ -#define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ -#define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ -#define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ -#define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ -#define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ -#define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ -#define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ -#define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ -#define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ -#define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ -#define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ -#define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ -#define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ -#define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ -#define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ -#define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ -#define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ -#define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ -#define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ -#define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ -#define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ -#define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ -#define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ -#define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ -#define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ -#define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ -#define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ -#define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ -#define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ -#define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ -#define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ -#define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ -#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ -#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ - -/* - * The following are the values for two KOBIL chipcard terminals. - */ -#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ -#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ -#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ - -/* - * Icom ID-1 digital transceiver - */ - -#define ICOM_ID1_VID 0x0C26 -#define ICOM_ID1_PID 0x0004 - -/* - * ASK.fr devices - */ -#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ - -/* - * FTDI USB UART chips used in construction projects from the - * Elektor Electronics magazine (http://elektor-electronics.co.uk) - */ -#define ELEKTOR_VID 0x0C7D -#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ - -/* - * DSS-20 Sync Station for Sony Ericsson P800 - */ -#define FTDI_DSS20_PID 0xFC82 - -/* - * Home Electronics (www.home-electro.com) USB gadgets - */ -#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ - -/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ -/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ -#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ - -/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ - -#define FTDI_TNC_X_PID 0xEBE0 - -/* - * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). - * All of these devices use FTDI's vendor ID (0x0403). - * - * The previously included PID for the UO 100 module was incorrect. - * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). - * - * Armin Laeuger originally sent the PID for the UM 100 module. - */ -#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG */ -#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ -#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ -#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ -#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ -/* Additional ELV PIDs that default to using the FTDI D2XX drivers on - * MS Windows, rather than the FTDI Virtual Com Port drivers. - * Maybe these will be easier to use with the libftdi/libusb user-space - * drivers, or possibly the Comedi drivers in some cases. */ -#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ -#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ -#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ -#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ -#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ -#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ -#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ -#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ -#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ -#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ -#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ -#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ -#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ -#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ -#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ -#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ -#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ -#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ -#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ -#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ -#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */ -#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ -#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */ - -/* - * Definitions for ID TECH (www.idt-net.com) devices - */ -#define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ -#define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ - -/* - * Definitions for Omnidirectional Control Technology, Inc. devices - */ -#define OCT_VID 0x0B39 /* OCT vendor ID */ -/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ -/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ -/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ -#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ - -/* an infrared receiver for user access control with IR tags */ -#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ - -/* - * Definitions for Artemis astronomical USB based cameras - * Check it at http://www.artemisccd.co.uk/ - */ -#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ - -/* - * Definitions for ATIK Instruments astronomical USB based cameras - * Check it at http://www.atik-instruments.com/ - */ -#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ -#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ -#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ -#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ -#define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */ - -/* - * Protego product ids - */ -#define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */ -#define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */ -#define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */ -#define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */ - -/* - * Gude Analog- und Digitalsysteme GmbH - */ -#define FTDI_GUDEADS_E808_PID 0xE808 -#define FTDI_GUDEADS_E809_PID 0xE809 -#define FTDI_GUDEADS_E80A_PID 0xE80A -#define FTDI_GUDEADS_E80B_PID 0xE80B -#define FTDI_GUDEADS_E80C_PID 0xE80C -#define FTDI_GUDEADS_E80D_PID 0xE80D -#define FTDI_GUDEADS_E80E_PID 0xE80E -#define FTDI_GUDEADS_E80F_PID 0xE80F -#define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ -#define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ -#define FTDI_GUDEADS_E88A_PID 0xE88A -#define FTDI_GUDEADS_E88B_PID 0xE88B -#define FTDI_GUDEADS_E88C_PID 0xE88C -#define FTDI_GUDEADS_E88D_PID 0xE88D -#define FTDI_GUDEADS_E88E_PID 0xE88E -#define FTDI_GUDEADS_E88F_PID 0xE88F - -/* - * Linx Technologies product ids - */ -#define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ -#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ -#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ -#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ -#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ - -/* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */ -/* unit for PIC16's/PIC18's */ -#define FTDI_CCSICDU20_0_PID 0xF9D0 -#define FTDI_CCSICDU40_1_PID 0xF9D1 -#define FTDI_CCSMACHX_2_PID 0xF9D2 -#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3 -#define FTDI_CCSICDU64_4_PID 0xF9D4 -#define FTDI_CCSPRIME8_5_PID 0xF9D5 - -/* Inside Accesso contactless reader (http://www.insidefr.com) */ -#define INSIDE_ACCESSO 0xFAD0 - -/* - * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI - */ -#define INTREPID_VID 0x093C -#define INTREPID_VALUECAN_PID 0x0601 -#define INTREPID_NEOVI_PID 0x0701 - -/* - * Falcom Wireless Communications GmbH - */ -#define FALCOM_VID 0x0F94 /* Vendor Id */ -#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ -#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ - -/* - * SUUNTO product ids - */ -#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ - -/* - * Oceanic product ids - */ -#define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */ - -/* - * TTi (Thurlby Thandar Instruments) - */ -#define TTI_VID 0x103E /* Vendor Id */ -#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */ - -/* - * Definitions for B&B Electronics products. - */ -#define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ -#define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */ -#define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */ -#define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */ -#define BANDB_USOPTL4_PID 0xAC11 -#define BANDB_USPTL4_PID 0xAC12 -#define BANDB_USO9ML2DR_2_PID 0xAC16 -#define BANDB_USO9ML2DR_PID 0xAC17 -#define BANDB_USOPTL4DR2_PID 0xAC18 /* USOPTL4R-2 2-port Isolated RS-232 Converter */ -#define BANDB_USOPTL4DR_PID 0xAC19 -#define BANDB_485USB9F_2W_PID 0xAC25 -#define BANDB_485USB9F_4W_PID 0xAC26 -#define BANDB_232USB9M_PID 0xAC27 -#define BANDB_485USBTB_2W_PID 0xAC33 -#define BANDB_485USBTB_4W_PID 0xAC34 -#define BANDB_TTL5USB9M_PID 0xAC49 -#define BANDB_TTL3USB9M_PID 0xAC50 -#define BANDB_ZZ_PROG1_USB_PID 0xBA02 - -/* - * RM Michaelides CANview USB (http://www.rmcan.com) - * CAN fieldbus interface adapter, added by port GmbH www.port.de) - * Ian Abbott changed the macro names for consistency. - */ -#define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ - -/* - * EVER Eco Pro UPS (http://www.ever.com.pl/) - */ - -#define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ - -/* - * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, - * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices - * and I'm not entirely sure which are used by which. - */ -#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 -#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 - -/* - * Mobility Electronics products. - */ -#define MOBILITY_VID 0x1342 -#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ - -/* - * microHAM product IDs (http://www.microham.com). - * Submitted by Justin Burket (KL1RL) - * and Mike Studer (K6EEP) . - * Ian Abbott added a few more from the driver INF file. - */ -#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ -#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ -#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ -#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ -#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ -#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ -#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ -#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ - -/* - * Active Robots product ids. - */ -#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ - -/* - * Xsens Technologies BV products (http://www.xsens.com). - */ -#define XSENS_CONVERTER_0_PID 0xD388 -#define XSENS_CONVERTER_1_PID 0xD389 -#define XSENS_CONVERTER_2_PID 0xD38A -#define XSENS_CONVERTER_3_PID 0xD38B -#define XSENS_CONVERTER_4_PID 0xD38C -#define XSENS_CONVERTER_5_PID 0xD38D -#define XSENS_CONVERTER_6_PID 0xD38E -#define XSENS_CONVERTER_7_PID 0xD38F - -/* - * Teratronik product ids. - * Submitted by O. Wölfelschneider. - */ -#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ -#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ - -/* - * Evolution Robotics products (http://www.evolution.com/). - * Submitted by Shawn M. Lavelle. - */ -#define EVOLUTION_VID 0xDEEE /* Vendor ID */ -#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ -#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/ -#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/ -#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */ - -/* Pyramid Computer GmbH */ -#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ - -/* - * NDI (www.ndigital.com) product ids - */ -#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */ -#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */ -#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */ -#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */ -#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */ - -/* - * Posiflex inc retail equipment (http://www.posiflex.com.tw) - */ -#define POSIFLEX_VID 0x0d3a /* Vendor ID */ -#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ - -/* - * Westrex International devices submitted by Cory Lee - */ -#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ -#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ - -/* - * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) - */ -#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ - -/* - * Eclo (http://www.eclo.pt/) product IDs. - * PID 0xEA90 submitted by Martin Grill. - */ -#define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ - -/* - * Papouch products (http://www.papouch.com/) - * Submitted by Folkert van Heusden - */ - -#define PAPOUCH_VID 0x5050 /* Vendor ID */ -#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ -#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ - -/* - * ACG Identification Technologies GmbH products (http://www.acg.de/). - * Submitted by anton -at- goto10 -dot- org. */ -#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ - -/* - * Yost Engineering, Inc. products (www.yostengineering.com). - * PID 0xE050 submitted by Aaron Prose. - */ -#define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ - -/* - * ThorLabs USB motor drivers - */ -#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ - -/* - * Testo products (http://www.testo.com/) - * Submitted by Colin Leroy - */ -#define TESTO_VID 0x128D -#define TESTO_USB_INTERFACE_PID 0x0001 - -/* - * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. - */ -#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ - -/* - * Tactrix OpenPort (ECU) devices. - * OpenPort 1.3M submitted by Donour Sizemore. - * OpenPort 1.3S and 1.3U submitted by Ian Abbott. - */ -#define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */ -#define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */ -#define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */ - -/* - * Telldus Technologies - */ -#define TELLDUS_VID 0x1781 /* Vendor ID */ -#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */ - -/* - * IBS elektronik product ids - * Submitted by Thomas Schleusener - */ -#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */ -#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */ -#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */ -#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */ -#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */ -#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */ -#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */ -#define FTDI_IBS_PROD_PID 0xff3f /* future device */ - -/* - * MaxStream devices www.maxstream.net - */ -#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */ - -/* Olimex */ -#define OLIMEX_VID 0x15BA -#define OLIMEX_ARM_USB_OCD_PID 0x0003 - -/* Luminary Micro Stellaris Boards, VID = FTDI_VID */ -/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */ -#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 -#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 - -/* www.elsterelectricity.com Elster Unicom III Optical Probe */ -#define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */ - -/* - * The Mobility Lab (TML) - * Submitted by Pierre Castella - */ -#define TML_VID 0x1B91 /* Vendor ID */ -#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ - -/* Propox devices */ -#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 - -/* Rig Expert Ukraine devices */ -#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ - -/* Domintell products http://www.domintell.com */ -#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ -#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ - -/* Alti-2 products http://www.alti-2.com */ -#define ALTI2_VID 0x1BC9 -#define ALTI2_N3_PID 0x6001 /* Neptune 3 */ /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ @@ -910,86 +40,6 @@ #define INTERFACE_C 3 #define INTERFACE_D 4 -/* - * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3 - * Submitted by Harald Welte - */ -#define FIC_VID 0x1457 -#define FIC_NEO1973_DEBUG_PID 0x5118 - -/* - * RATOC REX-USB60F - */ -#define RATOC_VENDOR_ID 0x0584 -#define RATOC_PRODUCT_ID_USB60F 0xb020 - -/* - * DIEBOLD BCS SE923 - */ -#define DIEBOLD_BCS_SE923_PID 0xfb99 - -/* - * Atmel STK541 - */ -#define ATMEL_VID 0x03eb /* Vendor ID */ -#define STK541_PID 0x2109 /* Zigbee Controller */ - -/* - * Dresden Elektronic Sensor Terminal Board - */ -#define DE_VID 0x1cf1 /* Vendor ID */ -#define STB_PID 0x0001 /* Sensor Terminal Board */ -#define WHT_PID 0x0004 /* Wireless Handheld Terminal */ - -/* - * Blackfin gnICE JTAG - * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice - */ -#define ADI_VID 0x0456 -#define ADI_GNICE_PID 0xF000 -#define ADI_GNICEPLUS_PID 0xF001 - -/* - * JETI SPECTROMETER SPECBOS 1201 - * http://www.jeti.com/products/sys/scb/scb1201.php - */ -#define JETI_VID 0x0c6c -#define JETI_SPC1201_PID 0x04b2 - -/* - * Marvell SheevaPlug - */ -#define MARVELL_VID 0x9e88 -#define MARVELL_SHEEVAPLUG_PID 0x9e8f - -#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */ - -/* - * GN Otometrics (http://www.otometrics.com) - * Submitted by Ville Sundberg. - */ -#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */ -#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */ - -/* - * Bayer Ascensia Contour blood glucose meter USB-converter cable. - * http://winglucofacts.com/cables/ - */ -#define BAYER_VID 0x1A79 -#define BAYER_CONTOUR_CABLE_PID 0x6001 - -/* - * Marvell OpenRD Base, Client - * http://www.open-rd.org - * OpenRD Base, Client use VID 0x0403 - */ -#define MARVELL_OPENRD_PID 0x9e90 - -/* - * Hameg HO820 and HO870 interface (using VID 0x0403) - */ -#define HAMEG_HO820_PID 0xed74 -#define HAMEG_HO870_PID 0xed71 /* * BmRequestType: 1100 0000b @@ -1504,4 +554,3 @@ typedef enum { * B2..7 Length of message - (not including Byte 0) * */ - diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h new file mode 100644 index 00000000000..2b5017bd453 --- /dev/null +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -0,0 +1,959 @@ +/* + * vendor/product IDs (VID/PID) of devices using FTDI USB serial converters. + * + * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais + * from Rudolf Gugler + * + */ + +#define FTDI_VID 0x0403 /* Vendor Id */ +#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ +#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */ +#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ +#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ +#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ +#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */ +#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ +#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ +#define FTDI_NF_RIC_PID 0x0001 /* Product Id */ +#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */ + +/* Larsen and Brusgaard AltiTrack/USBtrack */ +#define LARSENBRUSGAARD_VID 0x0FD8 +#define LB_ALTITRACK_PID 0x0001 + +/* www.canusb.com Lawicel CANUSB device */ +#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ + +/* AlphaMicro Components AMC-232USB01 device */ +#define FTDI_AMC232_PID 0xFF00 /* Product Id */ + +/* www.candapter.com Ewert Energy Systems CANdapter device */ +#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ + +/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */ +/* the VID is the standard ftdi vid (FTDI_VID) */ +#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */ +#define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */ +#define FTDI_SCS_DEVICE_2_PID 0xD012 +#define FTDI_SCS_DEVICE_3_PID 0xD013 +#define FTDI_SCS_DEVICE_4_PID 0xD014 +#define FTDI_SCS_DEVICE_5_PID 0xD015 +#define FTDI_SCS_DEVICE_6_PID 0xD016 +#define FTDI_SCS_DEVICE_7_PID 0xD017 + +/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */ +#define FTDI_ACTZWAVE_PID 0xF2D0 + + +/* www.starting-point-systems.com µChameleon device */ +#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ + +/* www.irtrans.de device */ +#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ + + +/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ +#define FTDI_TTUSB_PID 0xFF20 /* Product Id */ + +/* iPlus device */ +#define FTDI_IPLUS_PID 0xD070 /* Product Id */ +#define FTDI_IPLUS2_PID 0xD071 /* Product Id */ + +/* DMX4ALL DMX Interfaces */ +#define FTDI_DMX4ALL 0xC850 + +/* OpenDCC (www.opendcc.de) product id */ +#define FTDI_OPENDCC_PID 0xBFD8 +#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9 +#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA +#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB + +/* Sprog II (Andrew Crosland's SprogII DCC interface) */ +#define FTDI_SPROG_II 0xF0C8 + +/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ +/* they use the ftdi chipset for the USB interface and the vendor id is the same */ +#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ +#define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ +#define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ +#define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ +#define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ +#define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ +#define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ +#define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ + +/* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */ +/* broadband internet service. The following PID is exhibited by the usb device supplied */ +/* (the VID is the standard ftdi vid (FTDI_VID) */ +#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ + +/* + * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device + * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen) + * (the VID is the standard ftdi vid (FTDI_VID) */ +#define FTDI_PCDJ_DAC2_PID 0xFA88 + +/* + * The following are the values for the Matrix Orbital LCD displays, + * which are the FT232BM ( similar to the 8U232AM ) + */ +#define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ + +/* OOCDlink by Joern Kaipf + * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ +#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ + +/* + * The following are the values for the Matrix Orbital FTDI Range + * Anything in this range will use an FT232RL. + */ +#define MTXORB_VID 0x1B3D +#define MTXORB_FTDI_RANGE_0100_PID 0x0100 +#define MTXORB_FTDI_RANGE_0101_PID 0x0101 +#define MTXORB_FTDI_RANGE_0102_PID 0x0102 +#define MTXORB_FTDI_RANGE_0103_PID 0x0103 +#define MTXORB_FTDI_RANGE_0104_PID 0x0104 +#define MTXORB_FTDI_RANGE_0105_PID 0x0105 +#define MTXORB_FTDI_RANGE_0106_PID 0x0106 +#define MTXORB_FTDI_RANGE_0107_PID 0x0107 +#define MTXORB_FTDI_RANGE_0108_PID 0x0108 +#define MTXORB_FTDI_RANGE_0109_PID 0x0109 +#define MTXORB_FTDI_RANGE_010A_PID 0x010A +#define MTXORB_FTDI_RANGE_010B_PID 0x010B +#define MTXORB_FTDI_RANGE_010C_PID 0x010C +#define MTXORB_FTDI_RANGE_010D_PID 0x010D +#define MTXORB_FTDI_RANGE_010E_PID 0x010E +#define MTXORB_FTDI_RANGE_010F_PID 0x010F +#define MTXORB_FTDI_RANGE_0110_PID 0x0110 +#define MTXORB_FTDI_RANGE_0111_PID 0x0111 +#define MTXORB_FTDI_RANGE_0112_PID 0x0112 +#define MTXORB_FTDI_RANGE_0113_PID 0x0113 +#define MTXORB_FTDI_RANGE_0114_PID 0x0114 +#define MTXORB_FTDI_RANGE_0115_PID 0x0115 +#define MTXORB_FTDI_RANGE_0116_PID 0x0116 +#define MTXORB_FTDI_RANGE_0117_PID 0x0117 +#define MTXORB_FTDI_RANGE_0118_PID 0x0118 +#define MTXORB_FTDI_RANGE_0119_PID 0x0119 +#define MTXORB_FTDI_RANGE_011A_PID 0x011A +#define MTXORB_FTDI_RANGE_011B_PID 0x011B +#define MTXORB_FTDI_RANGE_011C_PID 0x011C +#define MTXORB_FTDI_RANGE_011D_PID 0x011D +#define MTXORB_FTDI_RANGE_011E_PID 0x011E +#define MTXORB_FTDI_RANGE_011F_PID 0x011F +#define MTXORB_FTDI_RANGE_0120_PID 0x0120 +#define MTXORB_FTDI_RANGE_0121_PID 0x0121 +#define MTXORB_FTDI_RANGE_0122_PID 0x0122 +#define MTXORB_FTDI_RANGE_0123_PID 0x0123 +#define MTXORB_FTDI_RANGE_0124_PID 0x0124 +#define MTXORB_FTDI_RANGE_0125_PID 0x0125 +#define MTXORB_FTDI_RANGE_0126_PID 0x0126 +#define MTXORB_FTDI_RANGE_0127_PID 0x0127 +#define MTXORB_FTDI_RANGE_0128_PID 0x0128 +#define MTXORB_FTDI_RANGE_0129_PID 0x0129 +#define MTXORB_FTDI_RANGE_012A_PID 0x012A +#define MTXORB_FTDI_RANGE_012B_PID 0x012B +#define MTXORB_FTDI_RANGE_012C_PID 0x012C +#define MTXORB_FTDI_RANGE_012D_PID 0x012D +#define MTXORB_FTDI_RANGE_012E_PID 0x012E +#define MTXORB_FTDI_RANGE_012F_PID 0x012F +#define MTXORB_FTDI_RANGE_0130_PID 0x0130 +#define MTXORB_FTDI_RANGE_0131_PID 0x0131 +#define MTXORB_FTDI_RANGE_0132_PID 0x0132 +#define MTXORB_FTDI_RANGE_0133_PID 0x0133 +#define MTXORB_FTDI_RANGE_0134_PID 0x0134 +#define MTXORB_FTDI_RANGE_0135_PID 0x0135 +#define MTXORB_FTDI_RANGE_0136_PID 0x0136 +#define MTXORB_FTDI_RANGE_0137_PID 0x0137 +#define MTXORB_FTDI_RANGE_0138_PID 0x0138 +#define MTXORB_FTDI_RANGE_0139_PID 0x0139 +#define MTXORB_FTDI_RANGE_013A_PID 0x013A +#define MTXORB_FTDI_RANGE_013B_PID 0x013B +#define MTXORB_FTDI_RANGE_013C_PID 0x013C +#define MTXORB_FTDI_RANGE_013D_PID 0x013D +#define MTXORB_FTDI_RANGE_013E_PID 0x013E +#define MTXORB_FTDI_RANGE_013F_PID 0x013F +#define MTXORB_FTDI_RANGE_0140_PID 0x0140 +#define MTXORB_FTDI_RANGE_0141_PID 0x0141 +#define MTXORB_FTDI_RANGE_0142_PID 0x0142 +#define MTXORB_FTDI_RANGE_0143_PID 0x0143 +#define MTXORB_FTDI_RANGE_0144_PID 0x0144 +#define MTXORB_FTDI_RANGE_0145_PID 0x0145 +#define MTXORB_FTDI_RANGE_0146_PID 0x0146 +#define MTXORB_FTDI_RANGE_0147_PID 0x0147 +#define MTXORB_FTDI_RANGE_0148_PID 0x0148 +#define MTXORB_FTDI_RANGE_0149_PID 0x0149 +#define MTXORB_FTDI_RANGE_014A_PID 0x014A +#define MTXORB_FTDI_RANGE_014B_PID 0x014B +#define MTXORB_FTDI_RANGE_014C_PID 0x014C +#define MTXORB_FTDI_RANGE_014D_PID 0x014D +#define MTXORB_FTDI_RANGE_014E_PID 0x014E +#define MTXORB_FTDI_RANGE_014F_PID 0x014F +#define MTXORB_FTDI_RANGE_0150_PID 0x0150 +#define MTXORB_FTDI_RANGE_0151_PID 0x0151 +#define MTXORB_FTDI_RANGE_0152_PID 0x0152 +#define MTXORB_FTDI_RANGE_0153_PID 0x0153 +#define MTXORB_FTDI_RANGE_0154_PID 0x0154 +#define MTXORB_FTDI_RANGE_0155_PID 0x0155 +#define MTXORB_FTDI_RANGE_0156_PID 0x0156 +#define MTXORB_FTDI_RANGE_0157_PID 0x0157 +#define MTXORB_FTDI_RANGE_0158_PID 0x0158 +#define MTXORB_FTDI_RANGE_0159_PID 0x0159 +#define MTXORB_FTDI_RANGE_015A_PID 0x015A +#define MTXORB_FTDI_RANGE_015B_PID 0x015B +#define MTXORB_FTDI_RANGE_015C_PID 0x015C +#define MTXORB_FTDI_RANGE_015D_PID 0x015D +#define MTXORB_FTDI_RANGE_015E_PID 0x015E +#define MTXORB_FTDI_RANGE_015F_PID 0x015F +#define MTXORB_FTDI_RANGE_0160_PID 0x0160 +#define MTXORB_FTDI_RANGE_0161_PID 0x0161 +#define MTXORB_FTDI_RANGE_0162_PID 0x0162 +#define MTXORB_FTDI_RANGE_0163_PID 0x0163 +#define MTXORB_FTDI_RANGE_0164_PID 0x0164 +#define MTXORB_FTDI_RANGE_0165_PID 0x0165 +#define MTXORB_FTDI_RANGE_0166_PID 0x0166 +#define MTXORB_FTDI_RANGE_0167_PID 0x0167 +#define MTXORB_FTDI_RANGE_0168_PID 0x0168 +#define MTXORB_FTDI_RANGE_0169_PID 0x0169 +#define MTXORB_FTDI_RANGE_016A_PID 0x016A +#define MTXORB_FTDI_RANGE_016B_PID 0x016B +#define MTXORB_FTDI_RANGE_016C_PID 0x016C +#define MTXORB_FTDI_RANGE_016D_PID 0x016D +#define MTXORB_FTDI_RANGE_016E_PID 0x016E +#define MTXORB_FTDI_RANGE_016F_PID 0x016F +#define MTXORB_FTDI_RANGE_0170_PID 0x0170 +#define MTXORB_FTDI_RANGE_0171_PID 0x0171 +#define MTXORB_FTDI_RANGE_0172_PID 0x0172 +#define MTXORB_FTDI_RANGE_0173_PID 0x0173 +#define MTXORB_FTDI_RANGE_0174_PID 0x0174 +#define MTXORB_FTDI_RANGE_0175_PID 0x0175 +#define MTXORB_FTDI_RANGE_0176_PID 0x0176 +#define MTXORB_FTDI_RANGE_0177_PID 0x0177 +#define MTXORB_FTDI_RANGE_0178_PID 0x0178 +#define MTXORB_FTDI_RANGE_0179_PID 0x0179 +#define MTXORB_FTDI_RANGE_017A_PID 0x017A +#define MTXORB_FTDI_RANGE_017B_PID 0x017B +#define MTXORB_FTDI_RANGE_017C_PID 0x017C +#define MTXORB_FTDI_RANGE_017D_PID 0x017D +#define MTXORB_FTDI_RANGE_017E_PID 0x017E +#define MTXORB_FTDI_RANGE_017F_PID 0x017F +#define MTXORB_FTDI_RANGE_0180_PID 0x0180 +#define MTXORB_FTDI_RANGE_0181_PID 0x0181 +#define MTXORB_FTDI_RANGE_0182_PID 0x0182 +#define MTXORB_FTDI_RANGE_0183_PID 0x0183 +#define MTXORB_FTDI_RANGE_0184_PID 0x0184 +#define MTXORB_FTDI_RANGE_0185_PID 0x0185 +#define MTXORB_FTDI_RANGE_0186_PID 0x0186 +#define MTXORB_FTDI_RANGE_0187_PID 0x0187 +#define MTXORB_FTDI_RANGE_0188_PID 0x0188 +#define MTXORB_FTDI_RANGE_0189_PID 0x0189 +#define MTXORB_FTDI_RANGE_018A_PID 0x018A +#define MTXORB_FTDI_RANGE_018B_PID 0x018B +#define MTXORB_FTDI_RANGE_018C_PID 0x018C +#define MTXORB_FTDI_RANGE_018D_PID 0x018D +#define MTXORB_FTDI_RANGE_018E_PID 0x018E +#define MTXORB_FTDI_RANGE_018F_PID 0x018F +#define MTXORB_FTDI_RANGE_0190_PID 0x0190 +#define MTXORB_FTDI_RANGE_0191_PID 0x0191 +#define MTXORB_FTDI_RANGE_0192_PID 0x0192 +#define MTXORB_FTDI_RANGE_0193_PID 0x0193 +#define MTXORB_FTDI_RANGE_0194_PID 0x0194 +#define MTXORB_FTDI_RANGE_0195_PID 0x0195 +#define MTXORB_FTDI_RANGE_0196_PID 0x0196 +#define MTXORB_FTDI_RANGE_0197_PID 0x0197 +#define MTXORB_FTDI_RANGE_0198_PID 0x0198 +#define MTXORB_FTDI_RANGE_0199_PID 0x0199 +#define MTXORB_FTDI_RANGE_019A_PID 0x019A +#define MTXORB_FTDI_RANGE_019B_PID 0x019B +#define MTXORB_FTDI_RANGE_019C_PID 0x019C +#define MTXORB_FTDI_RANGE_019D_PID 0x019D +#define MTXORB_FTDI_RANGE_019E_PID 0x019E +#define MTXORB_FTDI_RANGE_019F_PID 0x019F +#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0 +#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1 +#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2 +#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3 +#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4 +#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5 +#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6 +#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7 +#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8 +#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9 +#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA +#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB +#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC +#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD +#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE +#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF +#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0 +#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1 +#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2 +#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3 +#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4 +#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5 +#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6 +#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7 +#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8 +#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9 +#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA +#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB +#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC +#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD +#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE +#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF +#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0 +#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1 +#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2 +#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3 +#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4 +#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5 +#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6 +#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7 +#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8 +#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9 +#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA +#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB +#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC +#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD +#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE +#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF +#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0 +#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1 +#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2 +#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3 +#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4 +#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5 +#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6 +#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7 +#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8 +#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9 +#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA +#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB +#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC +#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD +#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE +#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF +#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0 +#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1 +#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2 +#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3 +#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4 +#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5 +#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6 +#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7 +#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8 +#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9 +#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA +#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB +#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC +#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED +#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE +#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF +#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0 +#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1 +#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2 +#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3 +#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4 +#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5 +#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6 +#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7 +#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8 +#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9 +#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA +#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB +#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC +#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD +#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE +#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF + + + +/* Interbiometrics USB I/O Board */ +/* Developed for Interbiometrics by Rudolf Gugler */ +#define INTERBIOMETRICS_VID 0x1209 +#define INTERBIOMETRICS_IOBOARD_PID 0x1002 +#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 + +/* + * The following are the values for the Perle Systems + * UltraPort USB serial converters + */ +#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ + +/* + * The following are the values for the Sealevel SeaLINK+ adapters. + * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and + * removed some PIDs that don't seem to match any existing products.) + */ +#define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ +#define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ +#define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ +#define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ +#define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ +#define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */ +#define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ +#define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ +#define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ +#define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ +#define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ +#define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ +#define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ +#define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ +#define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ +#define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ +#define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ +#define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ +#define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ +#define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ +#define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ +#define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ +#define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ +#define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ +#define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ +#define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ +#define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ +#define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ +#define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ +#define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ +#define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ +#define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ +#define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ +#define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ +#define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ +#define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ +#define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ +#define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ +#define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ +#define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ +#define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ +#define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ +#define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ +#define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ +#define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ +#define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ +#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ +#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ + +/* + * The following are the values for two KOBIL chipcard terminals. + */ +#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ +#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ +#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ + +/* + * Icom ID-1 digital transceiver + */ + +#define ICOM_ID1_VID 0x0C26 +#define ICOM_ID1_PID 0x0004 + +/* + * ASK.fr devices + */ +#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ + +/* + * FTDI USB UART chips used in construction projects from the + * Elektor Electronics magazine (http://elektor-electronics.co.uk) + */ +#define ELEKTOR_VID 0x0C7D +#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ + +/* + * DSS-20 Sync Station for Sony Ericsson P800 + */ +#define FTDI_DSS20_PID 0xFC82 + +/* + * Home Electronics (www.home-electro.com) USB gadgets + */ +#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ + +/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ +/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ +#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ + +/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ + +#define FTDI_TNC_X_PID 0xEBE0 + +/* + * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). + * All of these devices use FTDI's vendor ID (0x0403). + * + * The previously included PID for the UO 100 module was incorrect. + * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). + * + * Armin Laeuger originally sent the PID for the UM 100 module. + */ +#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG */ +#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ +#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ +#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ +#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ +/* Additional ELV PIDs that default to using the FTDI D2XX drivers on + * MS Windows, rather than the FTDI Virtual Com Port drivers. + * Maybe these will be easier to use with the libftdi/libusb user-space + * drivers, or possibly the Comedi drivers in some cases. */ +#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ +#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ +#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ +#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ +#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ +#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ +#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ +#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ +#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ +#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ +#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ +#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ +#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ +#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ +#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ +#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ +#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ +#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ +#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ +#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ +#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */ +#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ +#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */ + +/* + * Definitions for ID TECH (www.idt-net.com) devices + */ +#define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ +#define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ + +/* + * Definitions for Omnidirectional Control Technology, Inc. devices + */ +#define OCT_VID 0x0B39 /* OCT vendor ID */ +/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ +/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ +/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ +#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ + +/* an infrared receiver for user access control with IR tags */ +#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ + +/* + * Definitions for Artemis astronomical USB based cameras + * Check it at http://www.artemisccd.co.uk/ + */ +#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ + +/* + * Definitions for ATIK Instruments astronomical USB based cameras + * Check it at http://www.atik-instruments.com/ + */ +#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ +#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ +#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ +#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ +#define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */ + +/* + * Protego product ids + */ +#define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */ +#define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */ +#define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */ +#define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */ + +/* + * Gude Analog- und Digitalsysteme GmbH + */ +#define FTDI_GUDEADS_E808_PID 0xE808 +#define FTDI_GUDEADS_E809_PID 0xE809 +#define FTDI_GUDEADS_E80A_PID 0xE80A +#define FTDI_GUDEADS_E80B_PID 0xE80B +#define FTDI_GUDEADS_E80C_PID 0xE80C +#define FTDI_GUDEADS_E80D_PID 0xE80D +#define FTDI_GUDEADS_E80E_PID 0xE80E +#define FTDI_GUDEADS_E80F_PID 0xE80F +#define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ +#define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ +#define FTDI_GUDEADS_E88A_PID 0xE88A +#define FTDI_GUDEADS_E88B_PID 0xE88B +#define FTDI_GUDEADS_E88C_PID 0xE88C +#define FTDI_GUDEADS_E88D_PID 0xE88D +#define FTDI_GUDEADS_E88E_PID 0xE88E +#define FTDI_GUDEADS_E88F_PID 0xE88F + +/* + * Linx Technologies product ids + */ +#define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ +#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ +#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ +#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ +#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ + +/* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */ +/* unit for PIC16's/PIC18's */ +#define FTDI_CCSICDU20_0_PID 0xF9D0 +#define FTDI_CCSICDU40_1_PID 0xF9D1 +#define FTDI_CCSMACHX_2_PID 0xF9D2 +#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3 +#define FTDI_CCSICDU64_4_PID 0xF9D4 +#define FTDI_CCSPRIME8_5_PID 0xF9D5 + +/* Inside Accesso contactless reader (http://www.insidefr.com) */ +#define INSIDE_ACCESSO 0xFAD0 + +/* + * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI + */ +#define INTREPID_VID 0x093C +#define INTREPID_VALUECAN_PID 0x0601 +#define INTREPID_NEOVI_PID 0x0701 + +/* + * Falcom Wireless Communications GmbH + */ +#define FALCOM_VID 0x0F94 /* Vendor Id */ +#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ +#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ + +/* + * SUUNTO product ids + */ +#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ + +/* + * Oceanic product ids + */ +#define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */ + +/* + * TTi (Thurlby Thandar Instruments) + */ +#define TTI_VID 0x103E /* Vendor Id */ +#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */ + +/* + * Definitions for B&B Electronics products. + */ +#define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ +#define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */ +#define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */ +#define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */ +#define BANDB_USOPTL4_PID 0xAC11 +#define BANDB_USPTL4_PID 0xAC12 +#define BANDB_USO9ML2DR_2_PID 0xAC16 +#define BANDB_USO9ML2DR_PID 0xAC17 +#define BANDB_USOPTL4DR2_PID 0xAC18 /* USOPTL4R-2 2-port Isolated RS-232 Converter */ +#define BANDB_USOPTL4DR_PID 0xAC19 +#define BANDB_485USB9F_2W_PID 0xAC25 +#define BANDB_485USB9F_4W_PID 0xAC26 +#define BANDB_232USB9M_PID 0xAC27 +#define BANDB_485USBTB_2W_PID 0xAC33 +#define BANDB_485USBTB_4W_PID 0xAC34 +#define BANDB_TTL5USB9M_PID 0xAC49 +#define BANDB_TTL3USB9M_PID 0xAC50 +#define BANDB_ZZ_PROG1_USB_PID 0xBA02 + +/* + * RM Michaelides CANview USB (http://www.rmcan.com) + * CAN fieldbus interface adapter, added by port GmbH www.port.de) + * Ian Abbott changed the macro names for consistency. + */ +#define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ + +/* + * EVER Eco Pro UPS (http://www.ever.com.pl/) + */ + +#define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ + +/* + * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, + * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices + * and I'm not entirely sure which are used by which. + */ +#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 +#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 + +/* + * Mobility Electronics products. + */ +#define MOBILITY_VID 0x1342 +#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ + +/* + * microHAM product IDs (http://www.microham.com). + * Submitted by Justin Burket (KL1RL) + * and Mike Studer (K6EEP) . + * Ian Abbott added a few more from the driver INF file. + */ +#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ +#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ +#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ +#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ +#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ +#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ +#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ +#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ + +/* + * Active Robots product ids. + */ +#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ + +/* + * Xsens Technologies BV products (http://www.xsens.com). + */ +#define XSENS_CONVERTER_0_PID 0xD388 +#define XSENS_CONVERTER_1_PID 0xD389 +#define XSENS_CONVERTER_2_PID 0xD38A +#define XSENS_CONVERTER_3_PID 0xD38B +#define XSENS_CONVERTER_4_PID 0xD38C +#define XSENS_CONVERTER_5_PID 0xD38D +#define XSENS_CONVERTER_6_PID 0xD38E +#define XSENS_CONVERTER_7_PID 0xD38F + +/* + * Teratronik product ids. + * Submitted by O. Wölfelschneider. + */ +#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ +#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ + +/* + * Evolution Robotics products (http://www.evolution.com/). + * Submitted by Shawn M. Lavelle. + */ +#define EVOLUTION_VID 0xDEEE /* Vendor ID */ +#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ +#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/ +#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/ +#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */ + +/* Pyramid Computer GmbH */ +#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ + +/* + * NDI (www.ndigital.com) product ids + */ +#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */ +#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */ +#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */ +#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */ +#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */ + +/* + * Posiflex inc retail equipment (http://www.posiflex.com.tw) + */ +#define POSIFLEX_VID 0x0d3a /* Vendor ID */ +#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ + +/* + * Westrex International devices submitted by Cory Lee + */ +#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ +#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ + +/* + * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) + */ +#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ + +/* + * Eclo (http://www.eclo.pt/) product IDs. + * PID 0xEA90 submitted by Martin Grill. + */ +#define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ + +/* + * Papouch products (http://www.papouch.com/) + * Submitted by Folkert van Heusden + */ + +#define PAPOUCH_VID 0x5050 /* Vendor ID */ +#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ +#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ + +/* + * ACG Identification Technologies GmbH products (http://www.acg.de/). + * Submitted by anton -at- goto10 -dot- org. + */ +#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ + +/* + * Yost Engineering, Inc. products (www.yostengineering.com). + * PID 0xE050 submitted by Aaron Prose. + */ +#define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ + +/* + * ThorLabs USB motor drivers + */ +#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ + +/* + * Testo products (http://www.testo.com/) + * Submitted by Colin Leroy + */ +#define TESTO_VID 0x128D +#define TESTO_USB_INTERFACE_PID 0x0001 + +/* + * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. + */ +#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ + +/* + * Tactrix OpenPort (ECU) devices. + * OpenPort 1.3M submitted by Donour Sizemore. + * OpenPort 1.3S and 1.3U submitted by Ian Abbott. + */ +#define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */ +#define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */ +#define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */ + +/* + * Telldus Technologies + */ +#define TELLDUS_VID 0x1781 /* Vendor ID */ +#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */ + +/* + * IBS elektronik product ids + * Submitted by Thomas Schleusener + */ +#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */ +#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */ +#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */ +#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */ +#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */ +#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */ +#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */ +#define FTDI_IBS_PROD_PID 0xff3f /* future device */ + +/* + * MaxStream devices www.maxstream.net + */ +#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */ + +/* Olimex */ +#define OLIMEX_VID 0x15BA +#define OLIMEX_ARM_USB_OCD_PID 0x0003 + +/* Luminary Micro Stellaris Boards, VID = FTDI_VID */ +/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */ +#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 +#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 + +/* www.elsterelectricity.com Elster Unicom III Optical Probe */ +#define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */ + +/* + * The Mobility Lab (TML) + * Submitted by Pierre Castella + */ +#define TML_VID 0x1B91 /* Vendor ID */ +#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ + +/* Propox devices */ +#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 + +/* Rig Expert Ukraine devices */ +#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ + +/* Domintell products http://www.domintell.com */ +#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ +#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ + +/* Alti-2 products http://www.alti-2.com */ +#define ALTI2_VID 0x1BC9 +#define ALTI2_N3_PID 0x6001 /* Neptune 3 */ + +/* + * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3 + * Submitted by Harald Welte + */ +#define FIC_VID 0x1457 +#define FIC_NEO1973_DEBUG_PID 0x5118 + +/* + * RATOC REX-USB60F + */ +#define RATOC_VENDOR_ID 0x0584 +#define RATOC_PRODUCT_ID_USB60F 0xb020 + +/* + * DIEBOLD BCS SE923 + */ +#define DIEBOLD_BCS_SE923_PID 0xfb99 + +/* + * Atmel STK541 + */ +#define ATMEL_VID 0x03eb /* Vendor ID */ +#define STK541_PID 0x2109 /* Zigbee Controller */ + +/* + * Dresden Elektronic Sensor Terminal Board + */ +#define DE_VID 0x1cf1 /* Vendor ID */ +#define STB_PID 0x0001 /* Sensor Terminal Board */ +#define WHT_PID 0x0004 /* Wireless Handheld Terminal */ + +/* + * Blackfin gnICE JTAG + * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice + */ +#define ADI_VID 0x0456 +#define ADI_GNICE_PID 0xF000 +#define ADI_GNICEPLUS_PID 0xF001 + +/* + * JETI SPECTROMETER SPECBOS 1201 + * http://www.jeti.com/products/sys/scb/scb1201.php + */ +#define JETI_VID 0x0c6c +#define JETI_SPC1201_PID 0x04b2 + +/* + * Marvell SheevaPlug + */ +#define MARVELL_VID 0x9e88 +#define MARVELL_SHEEVAPLUG_PID 0x9e8f + +#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */ + +/* + * GN Otometrics (http://www.otometrics.com) + * Submitted by Ville Sundberg. + */ +#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */ +#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */ + +/* + * Bayer Ascensia Contour blood glucose meter USB-converter cable. + * http://winglucofacts.com/cables/ + */ +#define BAYER_VID 0x1A79 +#define BAYER_CONTOUR_CABLE_PID 0x6001 + +/* + * Marvell OpenRD Base, Client + * http://www.open-rd.org + * OpenRD Base, Client use VID 0x0403 + */ +#define MARVELL_OPENRD_PID 0x9e90 + +/* + * Hameg HO820 and HO870 interface (using VID 0x0403) + */ +#define HAMEG_HO820_PID 0xed74 +#define HAMEG_HO870_PID 0xed71 + -- cgit v1.2.3 From 4e092d110fe931db3878865db185be1c9df3e182 Mon Sep 17 00:00:00 2001 From: Andreas Mohr Date: Thu, 17 Dec 2009 11:56:09 +0100 Subject: USB: ftdi_sio: sort PID/VID entries in new ftdi_sio_ids.h header This is a (almost) sort-only patch to sort FTDI device product ID definitions in new ftdi_sio_ids.h header. Advantage is that new device ID submissions will now have a specific (sorted) position - less future merge conflicts. Compile-tested, based on _current_ mainline git. Minor checkpatch.pl warnings were eliminated whereever it made sense, very minor text changes. Signed-off-by: Andreas Mohr Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio_ids.h | 1487 +++++++++++++++++++------------------ 1 file changed, 757 insertions(+), 730 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 2b5017bd453..da92b4952ff 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1,36 +1,85 @@ /* * vendor/product IDs (VID/PID) of devices using FTDI USB serial converters. + * Please keep numerically sorted within individual areas, thanks! * * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais * from Rudolf Gugler * */ + +/**********************************/ +/***** devices using FTDI VID *****/ +/**********************************/ + + #define FTDI_VID 0x0403 /* Vendor Id */ -#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ + + +/*** "original" FTDI device PIDs ***/ + #define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */ #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ -#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ #define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */ -#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ -#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ -#define FTDI_NF_RIC_PID 0x0001 /* Product Id */ -#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */ +#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ +#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ -/* Larsen and Brusgaard AltiTrack/USBtrack */ -#define LARSENBRUSGAARD_VID 0x0FD8 -#define LB_ALTITRACK_PID 0x0001 -/* www.canusb.com Lawicel CANUSB device */ -#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ +/*** third-party PIDs (using FTDI_VID) ***/ -/* AlphaMicro Components AMC-232USB01 device */ -#define FTDI_AMC232_PID 0xFF00 /* Product Id */ +/* + * Marvell OpenRD Base, Client + * http://www.open-rd.org + * OpenRD Base, Client use VID 0x0403 + */ +#define MARVELL_OPENRD_PID 0x9e90 /* www.candapter.com Ewert Energy Systems CANdapter device */ #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ +/* OOCDlink by Joern Kaipf + * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ +#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ + +/* Luminary Micro Stellaris Boards, VID = FTDI_VID */ +/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */ +#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 +#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 + +#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */ + +/* OpenDCC (www.opendcc.de) product id */ +#define FTDI_OPENDCC_PID 0xBFD8 +#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9 +#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA +#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB + +/* + * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) + */ +#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ + +/* DMX4ALL DMX Interfaces */ +#define FTDI_DMX4ALL 0xC850 + +/* + * ASK.fr devices + */ +#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ + +/* www.starting-point-systems.com µChameleon device */ +#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ + +/* + * Tactrix OpenPort (ECU) devices. + * OpenPort 1.3M submitted by Donour Sizemore. + * OpenPort 1.3S and 1.3U submitted by Ian Abbott. + */ +#define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */ +#define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */ +#define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */ + /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */ /* the VID is the standard ftdi vid (FTDI_VID) */ #define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */ @@ -42,523 +91,280 @@ #define FTDI_SCS_DEVICE_6_PID 0xD016 #define FTDI_SCS_DEVICE_7_PID 0xD017 -/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */ -#define FTDI_ACTZWAVE_PID 0xF2D0 +/* iPlus device */ +#define FTDI_IPLUS_PID 0xD070 /* Product Id */ +#define FTDI_IPLUS2_PID 0xD071 /* Product Id */ +/* + * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. + */ +#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ -/* www.starting-point-systems.com µChameleon device */ -#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ +/* Propox devices */ +#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 -/* www.irtrans.de device */ -#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ +/* + * Xsens Technologies BV products (http://www.xsens.com). + */ +#define XSENS_CONVERTER_0_PID 0xD388 +#define XSENS_CONVERTER_1_PID 0xD389 +#define XSENS_CONVERTER_2_PID 0xD38A +#define XSENS_CONVERTER_3_PID 0xD38B +#define XSENS_CONVERTER_4_PID 0xD38C +#define XSENS_CONVERTER_5_PID 0xD38D +#define XSENS_CONVERTER_6_PID 0xD38E +#define XSENS_CONVERTER_7_PID 0xD38F +/* + * NDI (www.ndigital.com) product ids + */ +#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */ +#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */ +#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */ +#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */ +#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */ -/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ -#define FTDI_TTUSB_PID 0xFF20 /* Product Id */ +/* + * Westrex International devices submitted by Cory Lee + */ +#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ +#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ -/* iPlus device */ -#define FTDI_IPLUS_PID 0xD070 /* Product Id */ -#define FTDI_IPLUS2_PID 0xD071 /* Product Id */ +/* + * ACG Identification Technologies GmbH products (http://www.acg.de/). + * Submitted by anton -at- goto10 -dot- org. + */ +#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ -/* DMX4ALL DMX Interfaces */ -#define FTDI_DMX4ALL 0xC850 +/* + * Definitions for Artemis astronomical USB based cameras + * Check it at http://www.artemisccd.co.uk/ + */ +#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ -/* OpenDCC (www.opendcc.de) product id */ -#define FTDI_OPENDCC_PID 0xBFD8 -#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9 -#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA -#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB +/* + * Definitions for ATIK Instruments astronomical USB based cameras + * Check it at http://www.atik-instruments.com/ + */ +#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ +#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ +#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ +#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ +#define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */ -/* Sprog II (Andrew Crosland's SprogII DCC interface) */ -#define FTDI_SPROG_II 0xF0C8 +/* + * Yost Engineering, Inc. products (www.yostengineering.com). + * PID 0xE050 submitted by Aaron Prose. + */ +#define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ -/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ -/* they use the ftdi chipset for the USB interface and the vendor id is the same */ -#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ -#define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ -#define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ -#define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ -#define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ -#define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ -#define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ -#define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ +/* + * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). + * All of these devices use FTDI's vendor ID (0x0403). + * + * The previously included PID for the UO 100 module was incorrect. + * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). + * + * Armin Laeuger originally sent the PID for the UM 100 module. + */ +#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ +#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ +#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */ +#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ +#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ +#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ +#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ +#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ +#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ +#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ +#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */ +#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ +#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ +#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ +#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ +#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ +#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ +#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ +#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ +#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ +#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ +#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ +/* Additional ELV PIDs that default to using the FTDI D2XX drivers on + * MS Windows, rather than the FTDI Virtual Com Port drivers. + * Maybe these will be easier to use with the libftdi/libusb user-space + * drivers, or possibly the Comedi drivers in some cases. */ +#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ +#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ +#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ +#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ +#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ -/* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */ -/* broadband internet service. The following PID is exhibited by the usb device supplied */ -/* (the VID is the standard ftdi vid (FTDI_VID) */ -#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ +/* + * EVER Eco Pro UPS (http://www.ever.com.pl/) + */ + +#define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ /* - * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device - * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen) - * (the VID is the standard ftdi vid (FTDI_VID) */ -#define FTDI_PCDJ_DAC2_PID 0xFA88 + * Active Robots product ids. + */ +#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ + +/* Pyramid Computer GmbH */ +#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ + +/* www.elsterelectricity.com Elster Unicom III Optical Probe */ +#define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */ /* - * The following are the values for the Matrix Orbital LCD displays, - * which are the FT232BM ( similar to the 8U232AM ) + * Gude Analog- und Digitalsysteme GmbH */ -#define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ -#define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ +#define FTDI_GUDEADS_E808_PID 0xE808 +#define FTDI_GUDEADS_E809_PID 0xE809 +#define FTDI_GUDEADS_E80A_PID 0xE80A +#define FTDI_GUDEADS_E80B_PID 0xE80B +#define FTDI_GUDEADS_E80C_PID 0xE80C +#define FTDI_GUDEADS_E80D_PID 0xE80D +#define FTDI_GUDEADS_E80E_PID 0xE80E +#define FTDI_GUDEADS_E80F_PID 0xE80F +#define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ +#define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ +#define FTDI_GUDEADS_E88A_PID 0xE88A +#define FTDI_GUDEADS_E88B_PID 0xE88B +#define FTDI_GUDEADS_E88C_PID 0xE88C +#define FTDI_GUDEADS_E88D_PID 0xE88D +#define FTDI_GUDEADS_E88E_PID 0xE88E +#define FTDI_GUDEADS_E88F_PID 0xE88F -/* OOCDlink by Joern Kaipf - * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ -#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ +/* + * Eclo (http://www.eclo.pt/) product IDs. + * PID 0xEA90 submitted by Martin Grill. + */ +#define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ + +/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ +#define FTDI_TNC_X_PID 0xEBE0 /* - * The following are the values for the Matrix Orbital FTDI Range - * Anything in this range will use an FT232RL. + * Teratronik product ids. + * Submitted by O. Wölfelschneider. */ -#define MTXORB_VID 0x1B3D -#define MTXORB_FTDI_RANGE_0100_PID 0x0100 -#define MTXORB_FTDI_RANGE_0101_PID 0x0101 -#define MTXORB_FTDI_RANGE_0102_PID 0x0102 -#define MTXORB_FTDI_RANGE_0103_PID 0x0103 -#define MTXORB_FTDI_RANGE_0104_PID 0x0104 -#define MTXORB_FTDI_RANGE_0105_PID 0x0105 -#define MTXORB_FTDI_RANGE_0106_PID 0x0106 -#define MTXORB_FTDI_RANGE_0107_PID 0x0107 -#define MTXORB_FTDI_RANGE_0108_PID 0x0108 -#define MTXORB_FTDI_RANGE_0109_PID 0x0109 -#define MTXORB_FTDI_RANGE_010A_PID 0x010A -#define MTXORB_FTDI_RANGE_010B_PID 0x010B -#define MTXORB_FTDI_RANGE_010C_PID 0x010C -#define MTXORB_FTDI_RANGE_010D_PID 0x010D -#define MTXORB_FTDI_RANGE_010E_PID 0x010E -#define MTXORB_FTDI_RANGE_010F_PID 0x010F -#define MTXORB_FTDI_RANGE_0110_PID 0x0110 -#define MTXORB_FTDI_RANGE_0111_PID 0x0111 -#define MTXORB_FTDI_RANGE_0112_PID 0x0112 -#define MTXORB_FTDI_RANGE_0113_PID 0x0113 -#define MTXORB_FTDI_RANGE_0114_PID 0x0114 -#define MTXORB_FTDI_RANGE_0115_PID 0x0115 -#define MTXORB_FTDI_RANGE_0116_PID 0x0116 -#define MTXORB_FTDI_RANGE_0117_PID 0x0117 -#define MTXORB_FTDI_RANGE_0118_PID 0x0118 -#define MTXORB_FTDI_RANGE_0119_PID 0x0119 -#define MTXORB_FTDI_RANGE_011A_PID 0x011A -#define MTXORB_FTDI_RANGE_011B_PID 0x011B -#define MTXORB_FTDI_RANGE_011C_PID 0x011C -#define MTXORB_FTDI_RANGE_011D_PID 0x011D -#define MTXORB_FTDI_RANGE_011E_PID 0x011E -#define MTXORB_FTDI_RANGE_011F_PID 0x011F -#define MTXORB_FTDI_RANGE_0120_PID 0x0120 -#define MTXORB_FTDI_RANGE_0121_PID 0x0121 -#define MTXORB_FTDI_RANGE_0122_PID 0x0122 -#define MTXORB_FTDI_RANGE_0123_PID 0x0123 -#define MTXORB_FTDI_RANGE_0124_PID 0x0124 -#define MTXORB_FTDI_RANGE_0125_PID 0x0125 -#define MTXORB_FTDI_RANGE_0126_PID 0x0126 -#define MTXORB_FTDI_RANGE_0127_PID 0x0127 -#define MTXORB_FTDI_RANGE_0128_PID 0x0128 -#define MTXORB_FTDI_RANGE_0129_PID 0x0129 -#define MTXORB_FTDI_RANGE_012A_PID 0x012A -#define MTXORB_FTDI_RANGE_012B_PID 0x012B -#define MTXORB_FTDI_RANGE_012C_PID 0x012C -#define MTXORB_FTDI_RANGE_012D_PID 0x012D -#define MTXORB_FTDI_RANGE_012E_PID 0x012E -#define MTXORB_FTDI_RANGE_012F_PID 0x012F -#define MTXORB_FTDI_RANGE_0130_PID 0x0130 -#define MTXORB_FTDI_RANGE_0131_PID 0x0131 -#define MTXORB_FTDI_RANGE_0132_PID 0x0132 -#define MTXORB_FTDI_RANGE_0133_PID 0x0133 -#define MTXORB_FTDI_RANGE_0134_PID 0x0134 -#define MTXORB_FTDI_RANGE_0135_PID 0x0135 -#define MTXORB_FTDI_RANGE_0136_PID 0x0136 -#define MTXORB_FTDI_RANGE_0137_PID 0x0137 -#define MTXORB_FTDI_RANGE_0138_PID 0x0138 -#define MTXORB_FTDI_RANGE_0139_PID 0x0139 -#define MTXORB_FTDI_RANGE_013A_PID 0x013A -#define MTXORB_FTDI_RANGE_013B_PID 0x013B -#define MTXORB_FTDI_RANGE_013C_PID 0x013C -#define MTXORB_FTDI_RANGE_013D_PID 0x013D -#define MTXORB_FTDI_RANGE_013E_PID 0x013E -#define MTXORB_FTDI_RANGE_013F_PID 0x013F -#define MTXORB_FTDI_RANGE_0140_PID 0x0140 -#define MTXORB_FTDI_RANGE_0141_PID 0x0141 -#define MTXORB_FTDI_RANGE_0142_PID 0x0142 -#define MTXORB_FTDI_RANGE_0143_PID 0x0143 -#define MTXORB_FTDI_RANGE_0144_PID 0x0144 -#define MTXORB_FTDI_RANGE_0145_PID 0x0145 -#define MTXORB_FTDI_RANGE_0146_PID 0x0146 -#define MTXORB_FTDI_RANGE_0147_PID 0x0147 -#define MTXORB_FTDI_RANGE_0148_PID 0x0148 -#define MTXORB_FTDI_RANGE_0149_PID 0x0149 -#define MTXORB_FTDI_RANGE_014A_PID 0x014A -#define MTXORB_FTDI_RANGE_014B_PID 0x014B -#define MTXORB_FTDI_RANGE_014C_PID 0x014C -#define MTXORB_FTDI_RANGE_014D_PID 0x014D -#define MTXORB_FTDI_RANGE_014E_PID 0x014E -#define MTXORB_FTDI_RANGE_014F_PID 0x014F -#define MTXORB_FTDI_RANGE_0150_PID 0x0150 -#define MTXORB_FTDI_RANGE_0151_PID 0x0151 -#define MTXORB_FTDI_RANGE_0152_PID 0x0152 -#define MTXORB_FTDI_RANGE_0153_PID 0x0153 -#define MTXORB_FTDI_RANGE_0154_PID 0x0154 -#define MTXORB_FTDI_RANGE_0155_PID 0x0155 -#define MTXORB_FTDI_RANGE_0156_PID 0x0156 -#define MTXORB_FTDI_RANGE_0157_PID 0x0157 -#define MTXORB_FTDI_RANGE_0158_PID 0x0158 -#define MTXORB_FTDI_RANGE_0159_PID 0x0159 -#define MTXORB_FTDI_RANGE_015A_PID 0x015A -#define MTXORB_FTDI_RANGE_015B_PID 0x015B -#define MTXORB_FTDI_RANGE_015C_PID 0x015C -#define MTXORB_FTDI_RANGE_015D_PID 0x015D -#define MTXORB_FTDI_RANGE_015E_PID 0x015E -#define MTXORB_FTDI_RANGE_015F_PID 0x015F -#define MTXORB_FTDI_RANGE_0160_PID 0x0160 -#define MTXORB_FTDI_RANGE_0161_PID 0x0161 -#define MTXORB_FTDI_RANGE_0162_PID 0x0162 -#define MTXORB_FTDI_RANGE_0163_PID 0x0163 -#define MTXORB_FTDI_RANGE_0164_PID 0x0164 -#define MTXORB_FTDI_RANGE_0165_PID 0x0165 -#define MTXORB_FTDI_RANGE_0166_PID 0x0166 -#define MTXORB_FTDI_RANGE_0167_PID 0x0167 -#define MTXORB_FTDI_RANGE_0168_PID 0x0168 -#define MTXORB_FTDI_RANGE_0169_PID 0x0169 -#define MTXORB_FTDI_RANGE_016A_PID 0x016A -#define MTXORB_FTDI_RANGE_016B_PID 0x016B -#define MTXORB_FTDI_RANGE_016C_PID 0x016C -#define MTXORB_FTDI_RANGE_016D_PID 0x016D -#define MTXORB_FTDI_RANGE_016E_PID 0x016E -#define MTXORB_FTDI_RANGE_016F_PID 0x016F -#define MTXORB_FTDI_RANGE_0170_PID 0x0170 -#define MTXORB_FTDI_RANGE_0171_PID 0x0171 -#define MTXORB_FTDI_RANGE_0172_PID 0x0172 -#define MTXORB_FTDI_RANGE_0173_PID 0x0173 -#define MTXORB_FTDI_RANGE_0174_PID 0x0174 -#define MTXORB_FTDI_RANGE_0175_PID 0x0175 -#define MTXORB_FTDI_RANGE_0176_PID 0x0176 -#define MTXORB_FTDI_RANGE_0177_PID 0x0177 -#define MTXORB_FTDI_RANGE_0178_PID 0x0178 -#define MTXORB_FTDI_RANGE_0179_PID 0x0179 -#define MTXORB_FTDI_RANGE_017A_PID 0x017A -#define MTXORB_FTDI_RANGE_017B_PID 0x017B -#define MTXORB_FTDI_RANGE_017C_PID 0x017C -#define MTXORB_FTDI_RANGE_017D_PID 0x017D -#define MTXORB_FTDI_RANGE_017E_PID 0x017E -#define MTXORB_FTDI_RANGE_017F_PID 0x017F -#define MTXORB_FTDI_RANGE_0180_PID 0x0180 -#define MTXORB_FTDI_RANGE_0181_PID 0x0181 -#define MTXORB_FTDI_RANGE_0182_PID 0x0182 -#define MTXORB_FTDI_RANGE_0183_PID 0x0183 -#define MTXORB_FTDI_RANGE_0184_PID 0x0184 -#define MTXORB_FTDI_RANGE_0185_PID 0x0185 -#define MTXORB_FTDI_RANGE_0186_PID 0x0186 -#define MTXORB_FTDI_RANGE_0187_PID 0x0187 -#define MTXORB_FTDI_RANGE_0188_PID 0x0188 -#define MTXORB_FTDI_RANGE_0189_PID 0x0189 -#define MTXORB_FTDI_RANGE_018A_PID 0x018A -#define MTXORB_FTDI_RANGE_018B_PID 0x018B -#define MTXORB_FTDI_RANGE_018C_PID 0x018C -#define MTXORB_FTDI_RANGE_018D_PID 0x018D -#define MTXORB_FTDI_RANGE_018E_PID 0x018E -#define MTXORB_FTDI_RANGE_018F_PID 0x018F -#define MTXORB_FTDI_RANGE_0190_PID 0x0190 -#define MTXORB_FTDI_RANGE_0191_PID 0x0191 -#define MTXORB_FTDI_RANGE_0192_PID 0x0192 -#define MTXORB_FTDI_RANGE_0193_PID 0x0193 -#define MTXORB_FTDI_RANGE_0194_PID 0x0194 -#define MTXORB_FTDI_RANGE_0195_PID 0x0195 -#define MTXORB_FTDI_RANGE_0196_PID 0x0196 -#define MTXORB_FTDI_RANGE_0197_PID 0x0197 -#define MTXORB_FTDI_RANGE_0198_PID 0x0198 -#define MTXORB_FTDI_RANGE_0199_PID 0x0199 -#define MTXORB_FTDI_RANGE_019A_PID 0x019A -#define MTXORB_FTDI_RANGE_019B_PID 0x019B -#define MTXORB_FTDI_RANGE_019C_PID 0x019C -#define MTXORB_FTDI_RANGE_019D_PID 0x019D -#define MTXORB_FTDI_RANGE_019E_PID 0x019E -#define MTXORB_FTDI_RANGE_019F_PID 0x019F -#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0 -#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1 -#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2 -#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3 -#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4 -#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5 -#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6 -#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7 -#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8 -#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9 -#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA -#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB -#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC -#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD -#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE -#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF -#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0 -#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1 -#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2 -#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3 -#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4 -#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5 -#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6 -#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7 -#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8 -#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9 -#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA -#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB -#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC -#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD -#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE -#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF -#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0 -#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1 -#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2 -#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3 -#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4 -#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5 -#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6 -#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7 -#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8 -#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9 -#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA -#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB -#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC -#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD -#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE -#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF -#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0 -#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1 -#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2 -#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3 -#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4 -#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5 -#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6 -#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7 -#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8 -#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9 -#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA -#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB -#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC -#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD -#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE -#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF -#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0 -#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1 -#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2 -#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3 -#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4 -#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5 -#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6 -#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7 -#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8 -#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9 -#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA -#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB -#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC -#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED -#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE -#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF -#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0 -#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1 -#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2 -#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3 -#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4 -#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5 -#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6 -#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7 -#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8 -#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9 -#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA -#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB -#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC -#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD -#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE -#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF - - - -/* Interbiometrics USB I/O Board */ -/* Developed for Interbiometrics by Rudolf Gugler */ -#define INTERBIOMETRICS_VID 0x1209 -#define INTERBIOMETRICS_IOBOARD_PID 0x1002 -#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 - -/* - * The following are the values for the Perle Systems - * UltraPort USB serial converters - */ -#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ - -/* - * The following are the values for the Sealevel SeaLINK+ adapters. - * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and - * removed some PIDs that don't seem to match any existing products.) - */ -#define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ -#define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ -#define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ -#define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ -#define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ -#define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */ -#define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ -#define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ -#define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ -#define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ -#define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ -#define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ -#define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ -#define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ -#define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ -#define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ -#define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ -#define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ -#define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ -#define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ -#define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ -#define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ -#define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ -#define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ -#define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ -#define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ -#define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ -#define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ -#define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ -#define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ -#define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ -#define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ -#define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ -#define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ -#define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ -#define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ -#define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ -#define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ -#define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ -#define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ -#define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ -#define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ -#define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ -#define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ -#define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ -#define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ -#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ -#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ +#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ +#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ -/* - * The following are the values for two KOBIL chipcard terminals. - */ -#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ -#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ -#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ +/* Rig Expert Ukraine devices */ +#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ /* - * Icom ID-1 digital transceiver + * Hameg HO820 and HO870 interface (using VID 0x0403) */ - -#define ICOM_ID1_VID 0x0C26 -#define ICOM_ID1_PID 0x0004 +#define HAMEG_HO820_PID 0xed74 +#define HAMEG_HO870_PID 0xed71 /* - * ASK.fr devices + * MaxStream devices www.maxstream.net */ -#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ +#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */ /* - * FTDI USB UART chips used in construction projects from the - * Elektor Electronics magazine (http://elektor-electronics.co.uk) + * microHAM product IDs (http://www.microham.com). + * Submitted by Justin Burket (KL1RL) + * and Mike Studer (K6EEP) . + * Ian Abbott added a few more from the driver INF file. */ -#define ELEKTOR_VID 0x0C7D -#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ +#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ +#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ +#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ +#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ +#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ +#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ +#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ +#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ -/* - * DSS-20 Sync Station for Sony Ericsson P800 - */ -#define FTDI_DSS20_PID 0xFC82 +/* Domintell products http://www.domintell.com */ +#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ +#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ /* - * Home Electronics (www.home-electro.com) USB gadgets + * The following are the values for the Perle Systems + * UltraPort USB serial converters */ -#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ +#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ -/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ -/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ -#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ +/* Sprog II (Andrew Crosland's SprogII DCC interface) */ +#define FTDI_SPROG_II 0xF0C8 -/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ +/* an infrared receiver for user access control with IR tags */ +#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ -#define FTDI_TNC_X_PID 0xEBE0 +/* ACT Solutions HomePro ZWave interface + (http://www.act-solutions.com/HomePro.htm) */ +#define FTDI_ACTZWAVE_PID 0xF2D0 -/* - * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). - * All of these devices use FTDI's vendor ID (0x0403). - * - * The previously included PID for the UO 100 module was incorrect. - * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). - * - * Armin Laeuger originally sent the PID for the UM 100 module. - */ -#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG */ -#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ -#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ -#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ -#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ -/* Additional ELV PIDs that default to using the FTDI D2XX drivers on - * MS Windows, rather than the FTDI Virtual Com Port drivers. - * Maybe these will be easier to use with the libftdi/libusb user-space - * drivers, or possibly the Comedi drivers in some cases. */ -#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ -#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ -#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ -#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ -#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ -#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ -#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ -#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ -#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ -#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ -#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ -#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ -#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ -#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ -#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ -#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ -#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ -#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ -#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ -#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ -#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */ -#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ -#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */ +/* + * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, + * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices + * and I'm not entirely sure which are used by which. + */ +#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 +#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 /* - * Definitions for ID TECH (www.idt-net.com) devices + * Linx Technologies product ids */ -#define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ -#define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ +#define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ +#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ +#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ +#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ +#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ /* - * Definitions for Omnidirectional Control Technology, Inc. devices + * Oceanic product ids */ -#define OCT_VID 0x0B39 /* OCT vendor ID */ -/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ -/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ -/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ -#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ +#define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */ -/* an infrared receiver for user access control with IR tags */ -#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ +/* + * SUUNTO product ids + */ +#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ + +/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ +/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ +#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ + +/* CCS Inc. ICDU/ICDU40 product ID - + * the FT232BM is used in an in-circuit-debugger unit for PIC16's/PIC18's */ +#define FTDI_CCSICDU20_0_PID 0xF9D0 +#define FTDI_CCSICDU40_1_PID 0xF9D1 +#define FTDI_CCSMACHX_2_PID 0xF9D2 +#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3 +#define FTDI_CCSICDU64_4_PID 0xF9D4 +#define FTDI_CCSPRIME8_5_PID 0xF9D5 /* - * Definitions for Artemis astronomical USB based cameras - * Check it at http://www.artemisccd.co.uk/ + * The following are the values for the Matrix Orbital LCD displays, + * which are the FT232BM ( similar to the 8U232AM ) */ -#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ +#define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ /* - * Definitions for ATIK Instruments astronomical USB based cameras - * Check it at http://www.atik-instruments.com/ + * Home Electronics (www.home-electro.com) USB gadgets */ -#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ -#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ -#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ -#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ -#define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */ +#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ + +/* Inside Accesso contactless reader (http://www.insidefr.com) */ +#define INSIDE_ACCESSO 0xFAD0 + +/* + * ThorLabs USB motor drivers + */ +#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ /* * Protego product ids @@ -569,75 +375,106 @@ #define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */ /* - * Gude Analog- und Digitalsysteme GmbH + * DSS-20 Sync Station for Sony Ericsson P800 */ -#define FTDI_GUDEADS_E808_PID 0xE808 -#define FTDI_GUDEADS_E809_PID 0xE809 -#define FTDI_GUDEADS_E80A_PID 0xE80A -#define FTDI_GUDEADS_E80B_PID 0xE80B -#define FTDI_GUDEADS_E80C_PID 0xE80C -#define FTDI_GUDEADS_E80D_PID 0xE80D -#define FTDI_GUDEADS_E80E_PID 0xE80E -#define FTDI_GUDEADS_E80F_PID 0xE80F -#define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ -#define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ -#define FTDI_GUDEADS_E88A_PID 0xE88A -#define FTDI_GUDEADS_E88B_PID 0xE88B -#define FTDI_GUDEADS_E88C_PID 0xE88C -#define FTDI_GUDEADS_E88D_PID 0xE88D -#define FTDI_GUDEADS_E88E_PID 0xE88E -#define FTDI_GUDEADS_E88F_PID 0xE88F +#define FTDI_DSS20_PID 0xFC82 + +/* www.irtrans.de device */ +#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ /* - * Linx Technologies product ids + * RM Michaelides CANview USB (http://www.rmcan.com) (FTDI_VID) + * CAN fieldbus interface adapter, added by port GmbH www.port.de) + * Ian Abbott changed the macro names for consistency. */ -#define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ -#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ -#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ -#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ -#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ +#define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ +/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ +#define FTDI_TTUSB_PID 0xFF20 /* Product Id */ -/* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */ -/* unit for PIC16's/PIC18's */ -#define FTDI_CCSICDU20_0_PID 0xF9D0 -#define FTDI_CCSICDU40_1_PID 0xF9D1 -#define FTDI_CCSMACHX_2_PID 0xF9D2 -#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3 -#define FTDI_CCSICDU64_4_PID 0xF9D4 -#define FTDI_CCSPRIME8_5_PID 0xF9D5 +#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 (FTDI_VID) */ -/* Inside Accesso contactless reader (http://www.insidefr.com) */ -#define INSIDE_ACCESSO 0xFAD0 +#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ /* - * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI + * PCDJ use ftdi based dj-controllers. The following PID is + * for their DAC-2 device http://www.pcdjhardware.com/DAC2.asp + * (the VID is the standard ftdi vid (FTDI_VID), PID sent by Wouter Paesen) */ -#define INTREPID_VID 0x093C -#define INTREPID_VALUECAN_PID 0x0601 -#define INTREPID_NEOVI_PID 0x0701 +#define FTDI_PCDJ_DAC2_PID 0xFA88 + +#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG (FTDI_VID) */ /* - * Falcom Wireless Communications GmbH + * DIEBOLD BCS SE923 (FTDI_VID) */ -#define FALCOM_VID 0x0F94 /* Vendor Id */ -#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ -#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ +#define DIEBOLD_BCS_SE923_PID 0xfb99 + +/* www.crystalfontz.com devices + * - thanx for providing free devices for evaluation ! + * they use the ftdi chipset for the USB interface + * and the vendor id is the same + */ +#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ +#define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ +#define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ +#define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ +#define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ +#define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ +#define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ +#define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ /* - * SUUNTO product ids + * Video Networks Limited / Homechoice in the UK use an ftdi-based device + * for their 1Mb broadband internet service. The following PID is exhibited + * by the usb device supplied (the VID is the standard ftdi vid (FTDI_VID) */ -#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ +#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ + +/* AlphaMicro Components AMC-232USB01 device (FTDI_VID) */ +#define FTDI_AMC232_PID 0xFF00 /* Product Id */ /* - * Oceanic product ids + * IBS elektronik product ids (FTDI_VID) + * Submitted by Thomas Schleusener */ -#define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */ +#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */ +#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */ +#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */ +#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */ +#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */ +#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */ +#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */ +#define FTDI_IBS_PROD_PID 0xff3f /* future device */ +/* www.canusb.com Lawicel CANUSB device (FTDI_VID) */ +#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ + + + +/********************************/ +/** third-party VID/PID combos **/ +/********************************/ + + /* - * TTi (Thurlby Thandar Instruments) + * Atmel STK541 */ -#define TTI_VID 0x103E /* Vendor Id */ -#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */ +#define ATMEL_VID 0x03eb /* Vendor ID */ +#define STK541_PID 0x2109 /* Zigbee Controller */ + +/* + * Blackfin gnICE JTAG + * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice + */ +#define ADI_VID 0x0456 +#define ADI_GNICE_PID 0xF000 +#define ADI_GNICEPLUS_PID 0xF001 + +/* + * RATOC REX-USB60F + */ +#define RATOC_VENDOR_ID 0x0584 +#define RATOC_PRODUCT_ID_USB60F 0xb020 /* * Definitions for B&B Electronics products. @@ -662,141 +499,147 @@ #define BANDB_ZZ_PROG1_USB_PID 0xBA02 /* - * RM Michaelides CANview USB (http://www.rmcan.com) - * CAN fieldbus interface adapter, added by port GmbH www.port.de) - * Ian Abbott changed the macro names for consistency. - */ -#define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ - -/* - * EVER Eco Pro UPS (http://www.ever.com.pl/) - */ - -#define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ - -/* - * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, - * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices - * and I'm not entirely sure which are used by which. - */ -#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 -#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 - -/* - * Mobility Electronics products. - */ -#define MOBILITY_VID 0x1342 -#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ - -/* - * microHAM product IDs (http://www.microham.com). - * Submitted by Justin Burket (KL1RL) - * and Mike Studer (K6EEP) . - * Ian Abbott added a few more from the driver INF file. - */ -#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ -#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ -#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ -#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ -#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ -#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ -#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ -#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ - -/* - * Active Robots product ids. - */ -#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ - -/* - * Xsens Technologies BV products (http://www.xsens.com). + * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI */ -#define XSENS_CONVERTER_0_PID 0xD388 -#define XSENS_CONVERTER_1_PID 0xD389 -#define XSENS_CONVERTER_2_PID 0xD38A -#define XSENS_CONVERTER_3_PID 0xD38B -#define XSENS_CONVERTER_4_PID 0xD38C -#define XSENS_CONVERTER_5_PID 0xD38D -#define XSENS_CONVERTER_6_PID 0xD38E -#define XSENS_CONVERTER_7_PID 0xD38F +#define INTREPID_VID 0x093C +#define INTREPID_VALUECAN_PID 0x0601 +#define INTREPID_NEOVI_PID 0x0701 /* - * Teratronik product ids. - * Submitted by O. Wölfelschneider. + * Definitions for ID TECH (www.idt-net.com) devices */ -#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ -#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ +#define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ +#define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ /* - * Evolution Robotics products (http://www.evolution.com/). - * Submitted by Shawn M. Lavelle. + * Definitions for Omnidirectional Control Technology, Inc. devices */ -#define EVOLUTION_VID 0xDEEE /* Vendor ID */ -#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ -#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/ -#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/ -#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */ - -/* Pyramid Computer GmbH */ -#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ +#define OCT_VID 0x0B39 /* OCT vendor ID */ +/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ +/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ +/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ +#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ /* - * NDI (www.ndigital.com) product ids + * Icom ID-1 digital transceiver */ -#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */ -#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */ -#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */ -#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */ -#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */ + +#define ICOM_ID1_VID 0x0C26 +#define ICOM_ID1_PID 0x0004 /* - * Posiflex inc retail equipment (http://www.posiflex.com.tw) + * GN Otometrics (http://www.otometrics.com) + * Submitted by Ville Sundberg. */ -#define POSIFLEX_VID 0x0d3a /* Vendor ID */ -#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ +#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */ +#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */ /* - * Westrex International devices submitted by Cory Lee + * The following are the values for the Sealevel SeaLINK+ adapters. + * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and + * removed some PIDs that don't seem to match any existing products.) */ -#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ -#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ +#define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ +#define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ +#define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ +#define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ +#define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ +#define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */ +#define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ +#define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ +#define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ +#define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ +#define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ +#define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ +#define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ +#define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ +#define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ +#define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ +#define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ +#define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ +#define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ +#define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ +#define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ +#define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ +#define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ +#define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ +#define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ +#define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ +#define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ +#define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ +#define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ +#define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ +#define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ +#define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ +#define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ +#define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ +#define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ +#define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ +#define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ +#define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ +#define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ +#define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ +#define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ +#define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ +#define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ +#define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ +#define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ +#define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ +#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ +#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ /* - * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) + * JETI SPECTROMETER SPECBOS 1201 + * http://www.jeti.com/products/sys/scb/scb1201.php */ -#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ +#define JETI_VID 0x0c6c +#define JETI_SPC1201_PID 0x04b2 /* - * Eclo (http://www.eclo.pt/) product IDs. - * PID 0xEA90 submitted by Martin Grill. + * FTDI USB UART chips used in construction projects from the + * Elektor Electronics magazine (http://elektor-electronics.co.uk) */ -#define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ +#define ELEKTOR_VID 0x0C7D +#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ /* - * Papouch products (http://www.papouch.com/) - * Submitted by Folkert van Heusden + * Posiflex inc retail equipment (http://www.posiflex.com.tw) */ - -#define PAPOUCH_VID 0x5050 /* Vendor ID */ -#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ -#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ +#define POSIFLEX_VID 0x0d3a /* Vendor ID */ +#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ /* - * ACG Identification Technologies GmbH products (http://www.acg.de/). - * Submitted by anton -at- goto10 -dot- org. + * The following are the values for two KOBIL chipcard terminals. */ -#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ +#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ +#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ +#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ + +#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ +#define FTDI_NF_RIC_PID 0x0001 /* Product Id */ /* - * Yost Engineering, Inc. products (www.yostengineering.com). - * PID 0xE050 submitted by Aaron Prose. + * Falcom Wireless Communications GmbH */ -#define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ +#define FALCOM_VID 0x0F94 /* Vendor Id */ +#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ +#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ + +/* Larsen and Brusgaard AltiTrack/USBtrack */ +#define LARSENBRUSGAARD_VID 0x0FD8 +#define LB_ALTITRACK_PID 0x0001 /* - * ThorLabs USB motor drivers + * TTi (Thurlby Thandar Instruments) */ -#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ +#define TTI_VID 0x103E /* Vendor Id */ +#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */ + +/* Interbiometrics USB I/O Board */ +/* Developed for Interbiometrics by Rudolf Gugler */ +#define INTERBIOMETRICS_VID 0x1209 +#define INTERBIOMETRICS_IOBOARD_PID 0x1002 +#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 /* * Testo products (http://www.testo.com/) @@ -806,18 +649,21 @@ #define TESTO_USB_INTERFACE_PID 0x0001 /* - * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. + * Mobility Electronics products. */ -#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ +#define MOBILITY_VID 0x1342 +#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ /* - * Tactrix OpenPort (ECU) devices. - * OpenPort 1.3M submitted by Donour Sizemore. - * OpenPort 1.3S and 1.3U submitted by Ian Abbott. + * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3 + * Submitted by Harald Welte */ -#define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */ -#define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */ -#define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */ +#define FIC_VID 0x1457 +#define FIC_NEO1973_DEBUG_PID 0x5118 + +/* Olimex */ +#define OLIMEX_VID 0x15BA +#define OLIMEX_ARM_USB_OCD_PID 0x0003 /* * Telldus Technologies @@ -826,34 +672,275 @@ #define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */ /* - * IBS elektronik product ids - * Submitted by Thomas Schleusener + * Bayer Ascensia Contour blood glucose meter USB-converter cable. + * http://winglucofacts.com/cables/ */ -#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */ -#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */ -#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */ -#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */ -#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */ -#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */ -#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */ -#define FTDI_IBS_PROD_PID 0xff3f /* future device */ +#define BAYER_VID 0x1A79 +#define BAYER_CONTOUR_CABLE_PID 0x6001 /* - * MaxStream devices www.maxstream.net + * The following are the values for the Matrix Orbital FTDI Range + * Anything in this range will use an FT232RL. */ -#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */ - -/* Olimex */ -#define OLIMEX_VID 0x15BA -#define OLIMEX_ARM_USB_OCD_PID 0x0003 +#define MTXORB_VID 0x1B3D +#define MTXORB_FTDI_RANGE_0100_PID 0x0100 +#define MTXORB_FTDI_RANGE_0101_PID 0x0101 +#define MTXORB_FTDI_RANGE_0102_PID 0x0102 +#define MTXORB_FTDI_RANGE_0103_PID 0x0103 +#define MTXORB_FTDI_RANGE_0104_PID 0x0104 +#define MTXORB_FTDI_RANGE_0105_PID 0x0105 +#define MTXORB_FTDI_RANGE_0106_PID 0x0106 +#define MTXORB_FTDI_RANGE_0107_PID 0x0107 +#define MTXORB_FTDI_RANGE_0108_PID 0x0108 +#define MTXORB_FTDI_RANGE_0109_PID 0x0109 +#define MTXORB_FTDI_RANGE_010A_PID 0x010A +#define MTXORB_FTDI_RANGE_010B_PID 0x010B +#define MTXORB_FTDI_RANGE_010C_PID 0x010C +#define MTXORB_FTDI_RANGE_010D_PID 0x010D +#define MTXORB_FTDI_RANGE_010E_PID 0x010E +#define MTXORB_FTDI_RANGE_010F_PID 0x010F +#define MTXORB_FTDI_RANGE_0110_PID 0x0110 +#define MTXORB_FTDI_RANGE_0111_PID 0x0111 +#define MTXORB_FTDI_RANGE_0112_PID 0x0112 +#define MTXORB_FTDI_RANGE_0113_PID 0x0113 +#define MTXORB_FTDI_RANGE_0114_PID 0x0114 +#define MTXORB_FTDI_RANGE_0115_PID 0x0115 +#define MTXORB_FTDI_RANGE_0116_PID 0x0116 +#define MTXORB_FTDI_RANGE_0117_PID 0x0117 +#define MTXORB_FTDI_RANGE_0118_PID 0x0118 +#define MTXORB_FTDI_RANGE_0119_PID 0x0119 +#define MTXORB_FTDI_RANGE_011A_PID 0x011A +#define MTXORB_FTDI_RANGE_011B_PID 0x011B +#define MTXORB_FTDI_RANGE_011C_PID 0x011C +#define MTXORB_FTDI_RANGE_011D_PID 0x011D +#define MTXORB_FTDI_RANGE_011E_PID 0x011E +#define MTXORB_FTDI_RANGE_011F_PID 0x011F +#define MTXORB_FTDI_RANGE_0120_PID 0x0120 +#define MTXORB_FTDI_RANGE_0121_PID 0x0121 +#define MTXORB_FTDI_RANGE_0122_PID 0x0122 +#define MTXORB_FTDI_RANGE_0123_PID 0x0123 +#define MTXORB_FTDI_RANGE_0124_PID 0x0124 +#define MTXORB_FTDI_RANGE_0125_PID 0x0125 +#define MTXORB_FTDI_RANGE_0126_PID 0x0126 +#define MTXORB_FTDI_RANGE_0127_PID 0x0127 +#define MTXORB_FTDI_RANGE_0128_PID 0x0128 +#define MTXORB_FTDI_RANGE_0129_PID 0x0129 +#define MTXORB_FTDI_RANGE_012A_PID 0x012A +#define MTXORB_FTDI_RANGE_012B_PID 0x012B +#define MTXORB_FTDI_RANGE_012C_PID 0x012C +#define MTXORB_FTDI_RANGE_012D_PID 0x012D +#define MTXORB_FTDI_RANGE_012E_PID 0x012E +#define MTXORB_FTDI_RANGE_012F_PID 0x012F +#define MTXORB_FTDI_RANGE_0130_PID 0x0130 +#define MTXORB_FTDI_RANGE_0131_PID 0x0131 +#define MTXORB_FTDI_RANGE_0132_PID 0x0132 +#define MTXORB_FTDI_RANGE_0133_PID 0x0133 +#define MTXORB_FTDI_RANGE_0134_PID 0x0134 +#define MTXORB_FTDI_RANGE_0135_PID 0x0135 +#define MTXORB_FTDI_RANGE_0136_PID 0x0136 +#define MTXORB_FTDI_RANGE_0137_PID 0x0137 +#define MTXORB_FTDI_RANGE_0138_PID 0x0138 +#define MTXORB_FTDI_RANGE_0139_PID 0x0139 +#define MTXORB_FTDI_RANGE_013A_PID 0x013A +#define MTXORB_FTDI_RANGE_013B_PID 0x013B +#define MTXORB_FTDI_RANGE_013C_PID 0x013C +#define MTXORB_FTDI_RANGE_013D_PID 0x013D +#define MTXORB_FTDI_RANGE_013E_PID 0x013E +#define MTXORB_FTDI_RANGE_013F_PID 0x013F +#define MTXORB_FTDI_RANGE_0140_PID 0x0140 +#define MTXORB_FTDI_RANGE_0141_PID 0x0141 +#define MTXORB_FTDI_RANGE_0142_PID 0x0142 +#define MTXORB_FTDI_RANGE_0143_PID 0x0143 +#define MTXORB_FTDI_RANGE_0144_PID 0x0144 +#define MTXORB_FTDI_RANGE_0145_PID 0x0145 +#define MTXORB_FTDI_RANGE_0146_PID 0x0146 +#define MTXORB_FTDI_RANGE_0147_PID 0x0147 +#define MTXORB_FTDI_RANGE_0148_PID 0x0148 +#define MTXORB_FTDI_RANGE_0149_PID 0x0149 +#define MTXORB_FTDI_RANGE_014A_PID 0x014A +#define MTXORB_FTDI_RANGE_014B_PID 0x014B +#define MTXORB_FTDI_RANGE_014C_PID 0x014C +#define MTXORB_FTDI_RANGE_014D_PID 0x014D +#define MTXORB_FTDI_RANGE_014E_PID 0x014E +#define MTXORB_FTDI_RANGE_014F_PID 0x014F +#define MTXORB_FTDI_RANGE_0150_PID 0x0150 +#define MTXORB_FTDI_RANGE_0151_PID 0x0151 +#define MTXORB_FTDI_RANGE_0152_PID 0x0152 +#define MTXORB_FTDI_RANGE_0153_PID 0x0153 +#define MTXORB_FTDI_RANGE_0154_PID 0x0154 +#define MTXORB_FTDI_RANGE_0155_PID 0x0155 +#define MTXORB_FTDI_RANGE_0156_PID 0x0156 +#define MTXORB_FTDI_RANGE_0157_PID 0x0157 +#define MTXORB_FTDI_RANGE_0158_PID 0x0158 +#define MTXORB_FTDI_RANGE_0159_PID 0x0159 +#define MTXORB_FTDI_RANGE_015A_PID 0x015A +#define MTXORB_FTDI_RANGE_015B_PID 0x015B +#define MTXORB_FTDI_RANGE_015C_PID 0x015C +#define MTXORB_FTDI_RANGE_015D_PID 0x015D +#define MTXORB_FTDI_RANGE_015E_PID 0x015E +#define MTXORB_FTDI_RANGE_015F_PID 0x015F +#define MTXORB_FTDI_RANGE_0160_PID 0x0160 +#define MTXORB_FTDI_RANGE_0161_PID 0x0161 +#define MTXORB_FTDI_RANGE_0162_PID 0x0162 +#define MTXORB_FTDI_RANGE_0163_PID 0x0163 +#define MTXORB_FTDI_RANGE_0164_PID 0x0164 +#define MTXORB_FTDI_RANGE_0165_PID 0x0165 +#define MTXORB_FTDI_RANGE_0166_PID 0x0166 +#define MTXORB_FTDI_RANGE_0167_PID 0x0167 +#define MTXORB_FTDI_RANGE_0168_PID 0x0168 +#define MTXORB_FTDI_RANGE_0169_PID 0x0169 +#define MTXORB_FTDI_RANGE_016A_PID 0x016A +#define MTXORB_FTDI_RANGE_016B_PID 0x016B +#define MTXORB_FTDI_RANGE_016C_PID 0x016C +#define MTXORB_FTDI_RANGE_016D_PID 0x016D +#define MTXORB_FTDI_RANGE_016E_PID 0x016E +#define MTXORB_FTDI_RANGE_016F_PID 0x016F +#define MTXORB_FTDI_RANGE_0170_PID 0x0170 +#define MTXORB_FTDI_RANGE_0171_PID 0x0171 +#define MTXORB_FTDI_RANGE_0172_PID 0x0172 +#define MTXORB_FTDI_RANGE_0173_PID 0x0173 +#define MTXORB_FTDI_RANGE_0174_PID 0x0174 +#define MTXORB_FTDI_RANGE_0175_PID 0x0175 +#define MTXORB_FTDI_RANGE_0176_PID 0x0176 +#define MTXORB_FTDI_RANGE_0177_PID 0x0177 +#define MTXORB_FTDI_RANGE_0178_PID 0x0178 +#define MTXORB_FTDI_RANGE_0179_PID 0x0179 +#define MTXORB_FTDI_RANGE_017A_PID 0x017A +#define MTXORB_FTDI_RANGE_017B_PID 0x017B +#define MTXORB_FTDI_RANGE_017C_PID 0x017C +#define MTXORB_FTDI_RANGE_017D_PID 0x017D +#define MTXORB_FTDI_RANGE_017E_PID 0x017E +#define MTXORB_FTDI_RANGE_017F_PID 0x017F +#define MTXORB_FTDI_RANGE_0180_PID 0x0180 +#define MTXORB_FTDI_RANGE_0181_PID 0x0181 +#define MTXORB_FTDI_RANGE_0182_PID 0x0182 +#define MTXORB_FTDI_RANGE_0183_PID 0x0183 +#define MTXORB_FTDI_RANGE_0184_PID 0x0184 +#define MTXORB_FTDI_RANGE_0185_PID 0x0185 +#define MTXORB_FTDI_RANGE_0186_PID 0x0186 +#define MTXORB_FTDI_RANGE_0187_PID 0x0187 +#define MTXORB_FTDI_RANGE_0188_PID 0x0188 +#define MTXORB_FTDI_RANGE_0189_PID 0x0189 +#define MTXORB_FTDI_RANGE_018A_PID 0x018A +#define MTXORB_FTDI_RANGE_018B_PID 0x018B +#define MTXORB_FTDI_RANGE_018C_PID 0x018C +#define MTXORB_FTDI_RANGE_018D_PID 0x018D +#define MTXORB_FTDI_RANGE_018E_PID 0x018E +#define MTXORB_FTDI_RANGE_018F_PID 0x018F +#define MTXORB_FTDI_RANGE_0190_PID 0x0190 +#define MTXORB_FTDI_RANGE_0191_PID 0x0191 +#define MTXORB_FTDI_RANGE_0192_PID 0x0192 +#define MTXORB_FTDI_RANGE_0193_PID 0x0193 +#define MTXORB_FTDI_RANGE_0194_PID 0x0194 +#define MTXORB_FTDI_RANGE_0195_PID 0x0195 +#define MTXORB_FTDI_RANGE_0196_PID 0x0196 +#define MTXORB_FTDI_RANGE_0197_PID 0x0197 +#define MTXORB_FTDI_RANGE_0198_PID 0x0198 +#define MTXORB_FTDI_RANGE_0199_PID 0x0199 +#define MTXORB_FTDI_RANGE_019A_PID 0x019A +#define MTXORB_FTDI_RANGE_019B_PID 0x019B +#define MTXORB_FTDI_RANGE_019C_PID 0x019C +#define MTXORB_FTDI_RANGE_019D_PID 0x019D +#define MTXORB_FTDI_RANGE_019E_PID 0x019E +#define MTXORB_FTDI_RANGE_019F_PID 0x019F +#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0 +#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1 +#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2 +#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3 +#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4 +#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5 +#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6 +#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7 +#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8 +#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9 +#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA +#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB +#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC +#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD +#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE +#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF +#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0 +#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1 +#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2 +#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3 +#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4 +#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5 +#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6 +#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7 +#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8 +#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9 +#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA +#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB +#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC +#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD +#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE +#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF +#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0 +#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1 +#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2 +#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3 +#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4 +#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5 +#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6 +#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7 +#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8 +#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9 +#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA +#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB +#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC +#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD +#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE +#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF +#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0 +#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1 +#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2 +#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3 +#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4 +#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5 +#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6 +#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7 +#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8 +#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9 +#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA +#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB +#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC +#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD +#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE +#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF +#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0 +#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1 +#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2 +#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3 +#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4 +#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5 +#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6 +#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7 +#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8 +#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9 +#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA +#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB +#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC +#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED +#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE +#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF +#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0 +#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1 +#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2 +#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3 +#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4 +#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5 +#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6 +#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7 +#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8 +#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9 +#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA +#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB +#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC +#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD +#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE +#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF -/* Luminary Micro Stellaris Boards, VID = FTDI_VID */ -/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */ -#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 -#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 -/* www.elsterelectricity.com Elster Unicom III Optical Probe */ -#define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */ /* * The Mobility Lab (TML) @@ -862,44 +949,10 @@ #define TML_VID 0x1B91 /* Vendor ID */ #define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ -/* Propox devices */ -#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 - -/* Rig Expert Ukraine devices */ -#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ - -/* Domintell products http://www.domintell.com */ -#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ -#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ - /* Alti-2 products http://www.alti-2.com */ #define ALTI2_VID 0x1BC9 #define ALTI2_N3_PID 0x6001 /* Neptune 3 */ -/* - * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3 - * Submitted by Harald Welte - */ -#define FIC_VID 0x1457 -#define FIC_NEO1973_DEBUG_PID 0x5118 - -/* - * RATOC REX-USB60F - */ -#define RATOC_VENDOR_ID 0x0584 -#define RATOC_PRODUCT_ID_USB60F 0xb020 - -/* - * DIEBOLD BCS SE923 - */ -#define DIEBOLD_BCS_SE923_PID 0xfb99 - -/* - * Atmel STK541 - */ -#define ATMEL_VID 0x03eb /* Vendor ID */ -#define STK541_PID 0x2109 /* Zigbee Controller */ - /* * Dresden Elektronic Sensor Terminal Board */ @@ -908,19 +961,13 @@ #define WHT_PID 0x0004 /* Wireless Handheld Terminal */ /* - * Blackfin gnICE JTAG - * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice + * Papouch products (http://www.papouch.com/) + * Submitted by Folkert van Heusden */ -#define ADI_VID 0x0456 -#define ADI_GNICE_PID 0xF000 -#define ADI_GNICEPLUS_PID 0xF001 -/* - * JETI SPECTROMETER SPECBOS 1201 - * http://www.jeti.com/products/sys/scb/scb1201.php - */ -#define JETI_VID 0x0c6c -#define JETI_SPC1201_PID 0x04b2 +#define PAPOUCH_VID 0x5050 /* Vendor ID */ +#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ +#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ /* * Marvell SheevaPlug @@ -928,32 +975,12 @@ #define MARVELL_VID 0x9e88 #define MARVELL_SHEEVAPLUG_PID 0x9e8f -#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */ - /* - * GN Otometrics (http://www.otometrics.com) - * Submitted by Ville Sundberg. - */ -#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */ -#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */ - -/* - * Bayer Ascensia Contour blood glucose meter USB-converter cable. - * http://winglucofacts.com/cables/ - */ -#define BAYER_VID 0x1A79 -#define BAYER_CONTOUR_CABLE_PID 0x6001 - -/* - * Marvell OpenRD Base, Client - * http://www.open-rd.org - * OpenRD Base, Client use VID 0x0403 - */ -#define MARVELL_OPENRD_PID 0x9e90 - -/* - * Hameg HO820 and HO870 interface (using VID 0x0403) + * Evolution Robotics products (http://www.evolution.com/). + * Submitted by Shawn M. Lavelle. */ -#define HAMEG_HO820_PID 0xed74 -#define HAMEG_HO870_PID 0xed71 - +#define EVOLUTION_VID 0xDEEE /* Vendor ID */ +#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ +#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/ +#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/ +#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */ -- cgit v1.2.3 From 95962a773ca5c1e52305fd1003d3bda59abbf371 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 16 Dec 2009 20:38:31 +0300 Subject: USB: musb_gadget: fix kernel oops in txstate() Commit 7723de7e19b744144975a09c81777ec0f14ac5b3 (USB: musb_gadget: remove pointless loop) included uncalled for (and incorrect) optimization that might cause a kernel oops in txstate() -- undo it. Signed-off-by: Sergei Shtylyov Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index c49b9ba025a..4dea1460925 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -515,12 +515,12 @@ void musb_g_tx(struct musb *musb, u8 epnum) if (csr & MUSB_TXCSR_FIFONOTEMPTY) return; - if (!musb_ep->desc) { + request = musb_ep->desc ? next_request(musb_ep) : NULL; + if (!request) { DBG(4, "%s idle now\n", musb_ep->end_point.name); return; - } else - request = next_request(musb_ep); + } } txstate(musb, to_musb_request(request)); -- cgit v1.2.3 From e3060b175c1bd60586f51482464530dd1b37f3cf Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 15 Dec 2009 11:08:41 +0200 Subject: USB: musb: move musb_remove to __exit probe() already was on __init, so moving remove() to __exit. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index bfe08f4975a..1041bb734bb 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2139,7 +2139,7 @@ static int __init musb_probe(struct platform_device *pdev) return musb_init_controller(dev, irq, base); } -static int __devexit musb_remove(struct platform_device *pdev) +static int __exit musb_remove(struct platform_device *pdev) { struct musb *musb = dev_to_musb(&pdev->dev); void __iomem *ctrl_base = musb->ctrl_base; @@ -2231,7 +2231,7 @@ static struct platform_driver musb_driver = { .owner = THIS_MODULE, .pm = MUSB_DEV_PM_OPS, }, - .remove = __devexit_p(musb_remove), + .remove = __exit_p(musb_remove), .shutdown = musb_shutdown, }; -- cgit v1.2.3 From f95c4c0186aa94ad41681d8f0ecd79cc45f92bda Mon Sep 17 00:00:00 2001 From: Cliff Cai Date: Tue, 15 Dec 2009 11:08:44 +0200 Subject: USB: musb: fix compiling warning with min() macro Current musb gadget dma code produces the warning: drivers/usb/musb/musb_gadget.c: In function 'txstate': drivers/usb/musb/musb_gadget.c:312: warning: comparison of distinct pointer types lacks a cast So switch to min_t(size_t, ...). Signed-off-by: Cliff Cai Signed-off-by: Mike Frysinger Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 4dea1460925..0c36925c593 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -309,7 +309,7 @@ static void txstate(struct musb *musb, struct musb_request *req) size_t request_size; /* setup DMA, then program endpoint CSR */ - request_size = min(request->length, + request_size = min_t(size_t, request->length, musb_ep->dma->max_len); if (request_size < musb_ep->packet_sz) musb_ep->dma->desired_mode = 0; -- cgit v1.2.3 From 8a700f3d0d34a79c9cb25f2c66552c181f9c5737 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 15 Dec 2009 11:08:45 +0200 Subject: USB: musb: MAINTAINERS: Fix my tree's address The tree is now on a new address. Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index d5244f1580b..745643b8c34 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3679,7 +3679,7 @@ F: include/linux/isicom.h MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER M: Felipe Balbi L: linux-usb@vger.kernel.org -T: git git://gitorious.org/musb/mainline.git +T: git git://gitorious.org/usb/usb.git S: Maintained F: drivers/usb/musb/ -- cgit v1.2.3 From a2396a32b848a9864f933ced860192c72c769aca Mon Sep 17 00:00:00 2001 From: Swaminathan S Date: Tue, 15 Dec 2009 13:29:57 +0200 Subject: USB: musb: Populate the VBUS GPIO with the correct GPIO number This fixes a null-pointer dereference bug. Signed-off-by: Swaminathan S Cc: David Brownell Acked-by: Sergei Shtylyov Acked-by: Anand Gadiyar Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/davinci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index e16ff605c45..66913811af5 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -42,7 +42,7 @@ #include "musb_core.h" #ifdef CONFIG_MACH_DAVINCI_EVM -#define GPIO_nVBUS_DRV 144 +#define GPIO_nVBUS_DRV 160 #endif #include "davinci.h" -- cgit v1.2.3 From d4c433fe6f04195a1a0d2146d9f11ad45eecef86 Mon Sep 17 00:00:00 2001 From: Arnaud Mandy Date: Tue, 15 Dec 2009 13:29:58 +0200 Subject: USB: musb: gadget: set otg tranceiver to idle when registering gadget When registering gadget driver, the state of the transceiver must be set from undefined (no gadget) to b_idle. Module unload sets the transceiver state to undefined state. After the first load/unload pair, the reset irq will be lost. Signed-off-by: Arnaud Mandy Signed-off-by: Felipe Balbi Cc: David Brownell Acked-by: Anand Gadiyar Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 0c36925c593..e164999bd36 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1731,6 +1731,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) spin_lock_irqsave(&musb->lock, flags); otg_set_peripheral(musb->xceiv, &musb->g); + musb->xceiv->state = OTG_STATE_B_IDLE; musb->is_active = 1; /* FIXME this ignores the softconnect flag. Drivers are -- cgit v1.2.3 From cd42fef0a0b061817904fd6feb0de66830794857 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 15 Dec 2009 13:47:30 +0200 Subject: USB: musb: do not work if no gadget driver is loaded On OTG and gadget-only configurations, we need a gadget driver in order to work properly, so avoid changing operation modes when there's no gadget driver loaded. Signed-off-by: Felipe Balbi Cc: David Brownell Acked-by: Anand Gadiyar Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 1041bb734bb..24ff09754e0 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1521,6 +1521,14 @@ irqreturn_t musb_interrupt(struct musb *musb) (devctl & MUSB_DEVCTL_HM) ? "host" : "peripheral", musb->int_usb, musb->int_tx, musb->int_rx); +#ifdef CONFIG_USB_GADGET_MUSB_HDRC + if (is_otg_enabled(musb) || is_peripheral_enabled(musb)) + if (!musb->gadget_driver) { + DBG(5, "No gadget driver loaded\n"); + return IRQ_HANDLED; + } +#endif + /* the core can interrupt us for multiple reasons; docs have * a generic interrupt flowchart to follow */ -- cgit v1.2.3 From 93aa3dab008421789aa0f8865a62a52ae13269a3 Mon Sep 17 00:00:00 2001 From: Swaminathan S Date: Tue, 15 Dec 2009 13:30:00 +0200 Subject: USB: musb: fix for crash in DM646x USB when (CPPI)DMA is enabled Race condition exists between the cppi_interrupt handler and davinci_interrupt handler w.r.t completing a TX IO. Since DM646x has seperate DMA and USB endpoint interrupts cppi_interrupt handler needs to hold the lock while operating on the endpoint. Update over previous patch to avoid taking the lock if already taken. Tested on DM644x, DM355 and DM646x platforms. Signed-off-by: Swaminathan S Acked-by: Sergei Shtylyov Acked-by: Anand Gadiyar Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/cppi_dma.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index ef2332a9941..a44a450c860 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -1154,8 +1154,11 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id) struct musb_hw_ep *hw_ep = NULL; u32 rx, tx; int i, index; + unsigned long flags; cppi = container_of(musb->dma_controller, struct cppi, controller); + if (cppi->irq) + spin_lock_irqsave(&musb->lock, flags); tibase = musb->ctrl_base; @@ -1285,6 +1288,9 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id) /* write to CPPI EOI register to re-enable interrupts */ musb_writel(tibase, DAVINCI_CPPI_EOI_REG, 0); + if (cppi->irq) + spin_unlock_irqrestore(&musb->lock, flags); + return IRQ_HANDLED; } -- cgit v1.2.3 From 17be5c5f5ef99c94374e07f71effa78e93a20eda Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 15 Dec 2009 13:30:01 +0200 Subject: USB: musb: gadget_ep0: avoid SetupEnd interrupt Gadget stalling a zero-length SETUP request results in this error message: SetupEnd came in a wrong ep0stage idle In order to avoid it, always set the CSR0.DataEnd bit after detecting a zero- length request. Add the missing '\n' to the error message itself as well... Signed-off-by: Sergei Shtylyov Acked-by: Anand Gadiyar Cc: stable Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget_ep0.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c index 8fba3f11e47..53d06451f82 100644 --- a/drivers/usb/musb/musb_gadget_ep0.c +++ b/drivers/usb/musb/musb_gadget_ep0.c @@ -664,7 +664,7 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb) musb->ep0_state = MUSB_EP0_STAGE_STATUSIN; break; default: - ERR("SetupEnd came in a wrong ep0stage %s", + ERR("SetupEnd came in a wrong ep0stage %s\n", decode_ep0stage(musb->ep0_state)); } csr = musb_readw(regs, MUSB_CSR0); @@ -787,12 +787,18 @@ setup: handled = service_zero_data_request( musb, &setup); + /* + * We're expecting no data in any case, so + * always set the DATAEND bit -- doing this + * here helps avoid SetupEnd interrupt coming + * in the idle stage when we're stalling... + */ + musb->ackpend |= MUSB_CSR0_P_DATAEND; + /* status stage might be immediate */ - if (handled > 0) { - musb->ackpend |= MUSB_CSR0_P_DATAEND; + if (handled > 0) musb->ep0_state = MUSB_EP0_STAGE_STATUSIN; - } break; /* sequence #1 (IN to host), includes GET_STATUS -- cgit v1.2.3 From 796a83fa039de50133171221ac102a2310e81ffd Mon Sep 17 00:00:00 2001 From: Cliff Cai Date: Mon, 21 Dec 2009 21:18:02 -0500 Subject: USB: musb: correct DMA address for tx Since a DMA transfer may need to be kicked off several times to complete, the DMA start must include the length that has already been transferred. Signed-off-by: Cliff Cai Signed-off-by: Mike Frysinger Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index e164999bd36..ac306985a8a 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -319,7 +319,7 @@ static void txstate(struct musb *musb, struct musb_request *req) use_dma = use_dma && c->channel_program( musb_ep->dma, musb_ep->packet_sz, musb_ep->dma->desired_mode, - request->dma, request_size); + request->dma + request->actual, request_size); if (use_dma) { if (musb_ep->dma->desired_mode == 0) { /* -- cgit v1.2.3 From 0abdc36f066ae20521b8c8d306725dd59a0d50aa Mon Sep 17 00:00:00 2001 From: Maulik Mankad Date: Tue, 22 Dec 2009 16:18:19 +0530 Subject: USB: musb: Fix null pointer dereference issue This patch fixes the following NULL pointer dereference issue. Pointer 'request' returned from call to function 'next_request' at line 748 may be NULL and may be dereferenced at line 792. ============ Code Snippet ============ 748: request = next_request(musb_ep); 785: if (dma && (csr & MUSB_RXCSR_DMAENAB)) { csr &= ~(MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAENAB | MUSB_RXCSR_DMAMODE); musb_writew(epio, MUSB_RXCSR, MUSB_RXCSR_P_WZC_BITS | csr); 792: request->actual += musb_ep->dma->actual_len; Signed-off-by: Maulik Mankad Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index ac306985a8a..cbcf14a236e 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -746,6 +746,8 @@ void musb_g_rx(struct musb *musb, u8 epnum) musb_ep_select(mbase, epnum); request = next_request(musb_ep); + if (!request) + return; csr = musb_readw(epio, MUSB_RXCSR); dma = is_dma_capable() ? musb_ep->dma : NULL; -- cgit v1.2.3 From 0ea52ff44f7a30781881ca2debf35e47b2676171 Mon Sep 17 00:00:00 2001 From: Maulik Mankad Date: Tue, 22 Dec 2009 16:19:53 +0530 Subject: USB: musb: Fix array index out of bounds issue This patch fixes the below array index out of bounds issue. Buffer overflow, array index of 'aInfo' may be out of bounds. Array 'aInfo' of size 78 may use index value(s) 6..84 The data stored in 'aInfo' array exceeds the array size of 78. This patch increases the size of this array to hold the string correctly without any memory corruption. This issue was reported by Klockwork tool. Signed-off-by: Maulik Mankad Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 24ff09754e0..5eb9318cff7 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1319,7 +1319,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) #endif u8 reg; char *type; - char aInfo[78], aRevision[32], aDate[12]; + char aInfo[90], aRevision[32], aDate[12]; void __iomem *mbase = musb->mregs; int status = 0; int i; -- cgit v1.2.3 From 1c4bdc01b8a5cf6c54e5eb8bf9a727e38f0176cc Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Mon, 21 Dec 2009 09:49:52 -0500 Subject: USB: musb: workaround Blackfin FIFO anomalies Some of these workarounds are already in place, but labeled as affecting all BF52x parts. Since we have official anomaly numbers now, use those defines. And since writing to the FIFO has a similar hang issue as reading from the FIFO, implement the workaround there too when necessary. Signed-off-by: Bryan Wu Signed-off-by: Cliff Cai Signed-off-by: Mike Frysinger Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/blackfin.c | 134 ++++++++++++++++++++++++++++++-------------- drivers/usb/musb/blackfin.h | 2 - 2 files changed, 91 insertions(+), 45 deletions(-) diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index fe4934d9602..ad26e656966 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -29,6 +29,8 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) { void __iomem *fifo = hw_ep->fifo; void __iomem *epio = hw_ep->regs; + u8 epnum = hw_ep->epnum; + u16 dma_reg = 0; prefetch((u8 *)src); @@ -39,67 +41,113 @@ void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src) dump_fifo_data(src, len); - if (unlikely((unsigned long)src & 0x01)) - outsw_8((unsigned long)fifo, src, - len & 0x01 ? (len >> 1) + 1 : len >> 1); - else - outsw((unsigned long)fifo, src, - len & 0x01 ? (len >> 1) + 1 : len >> 1); -} + if (!ANOMALY_05000380 && epnum != 0) { + flush_dcache_range((unsigned int)src, + (unsigned int)(src + len)); + + /* Setup DMA address register */ + dma_reg = (u16) ((u32) src & 0xFFFF); + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg); + SSYNC(); + + dma_reg = (u16) (((u32) src >> 16) & 0xFFFF); + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg); + SSYNC(); + + /* Setup DMA count register */ + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len); + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0); + SSYNC(); + + /* Enable the DMA */ + dma_reg = (epnum << 4) | DMA_ENA | INT_ENA | DIRECTION; + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg); + SSYNC(); + + /* Wait for compelete */ + while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum))) + cpu_relax(); + + /* acknowledge dma interrupt */ + bfin_write_USB_DMA_INTERRUPT(1 << epnum); + SSYNC(); + + /* Reset DMA */ + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0); + SSYNC(); + } else { + SSYNC(); + + if (unlikely((unsigned long)src & 0x01)) + outsw_8((unsigned long)fifo, src, + len & 0x01 ? (len >> 1) + 1 : len >> 1); + else + outsw((unsigned long)fifo, src, + len & 0x01 ? (len >> 1) + 1 : len >> 1); + } +} /* * Unload an endpoint's FIFO */ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst) { void __iomem *fifo = hw_ep->fifo; - -#ifdef CONFIG_BF52x u8 epnum = hw_ep->epnum; u16 dma_reg = 0; - invalidate_dcache_range((unsigned int)dst, - (unsigned int)(dst + len)); + if (ANOMALY_05000467 && epnum != 0) { - /* Setup DMA address register */ - dma_reg = (u16) ((u32) dst & 0xFFFF); - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg); - SSYNC(); + invalidate_dcache_range((unsigned int)dst, + (unsigned int)(dst + len)); - dma_reg = (u16) (((u32) dst >> 16) & 0xFFFF); - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg); - SSYNC(); + /* Setup DMA address register */ + dma_reg = (u16) ((u32) dst & 0xFFFF); + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg); + SSYNC(); - /* Setup DMA count register */ - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len); - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0); - SSYNC(); + dma_reg = (u16) (((u32) dst >> 16) & 0xFFFF); + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg); + SSYNC(); - /* Enable the DMA */ - dma_reg = (epnum << 4) | DMA_ENA | INT_ENA; - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg); - SSYNC(); + /* Setup DMA count register */ + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_LOW), len); + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_COUNT_HIGH), 0); + SSYNC(); - /* Wait for compelete */ - while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum))) - cpu_relax(); + /* Enable the DMA */ + dma_reg = (epnum << 4) | DMA_ENA | INT_ENA; + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), dma_reg); + SSYNC(); - /* acknowledge dma interrupt */ - bfin_write_USB_DMA_INTERRUPT(1 << epnum); - SSYNC(); + /* Wait for compelete */ + while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << epnum))) + cpu_relax(); - /* Reset DMA */ - bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0); - SSYNC(); -#else - if (unlikely((unsigned long)dst & 0x01)) - insw_8((unsigned long)fifo, dst, - len & 0x01 ? (len >> 1) + 1 : len >> 1); - else - insw((unsigned long)fifo, dst, - len & 0x01 ? (len >> 1) + 1 : len >> 1); -#endif + /* acknowledge dma interrupt */ + bfin_write_USB_DMA_INTERRUPT(1 << epnum); + SSYNC(); + /* Reset DMA */ + bfin_write16(USB_DMA_REG(epnum, USB_DMAx_CTRL), 0); + SSYNC(); + } else { + SSYNC(); + /* Read the last byte of packet with odd size from address fifo + 4 + * to trigger 1 byte access to EP0 FIFO. + */ + if (len == 1) + *dst = (u8)inw((unsigned long)fifo + 4); + else { + if (unlikely((unsigned long)dst & 0x01)) + insw_8((unsigned long)fifo, dst, len >> 1); + else + insw((unsigned long)fifo, dst, len >> 1); + + if (len & 0x01) + *(dst + len - 1) = (u8)inw((unsigned long)fifo + 4); + } + } DBG(4, "%cX ep%d fifo %p count %d buf %p\n", 'R', hw_ep->epnum, fifo, len, dst); diff --git a/drivers/usb/musb/blackfin.h b/drivers/usb/musb/blackfin.h index 10b7d7584f4..bd9352a2ef2 100644 --- a/drivers/usb/musb/blackfin.h +++ b/drivers/usb/musb/blackfin.h @@ -69,7 +69,6 @@ static void dump_fifo_data(u8 *buf, u16 len) #define dump_fifo_data(buf, len) do {} while (0) #endif -#ifdef CONFIG_BF52x #define USB_DMA_BASE USB_DMA_INTERRUPT #define USB_DMAx_CTRL 0x04 @@ -79,7 +78,6 @@ static void dump_fifo_data(u8 *buf, u16 len) #define USB_DMAx_COUNT_HIGH 0x14 #define USB_DMA_REG(ep, reg) (USB_DMA_BASE + 0x20 * ep + reg) -#endif /* Almost 1 second */ #define TIMER_DELAY (1 * HZ) -- cgit v1.2.3 From 465f8294eea1ea206e3a008e7bfe0e8fd53991fc Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 15 Dec 2009 23:19:52 +0200 Subject: usb: otg: isp1301_omap: fix compile error commit 91c8a5a9985d5bf9c55f6f82f183f57b050b2a3a broke compilation of this driver after it introduced otg_init() as a static inline in Reported-by: Tony Lindgren Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/otg/isp1301_omap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c index d54460a8817..78a20970926 100644 --- a/drivers/usb/otg/isp1301_omap.c +++ b/drivers/usb/otg/isp1301_omap.c @@ -843,7 +843,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp) static struct platform_device *otg_dev; -static int otg_init(struct isp1301 *isp) +static int isp1301_otg_init(struct isp1301 *isp) { u32 l; @@ -1275,7 +1275,7 @@ static int __exit isp1301_remove(struct i2c_client *i2c) static int isp1301_otg_enable(struct isp1301 *isp) { power_up(isp); - otg_init(isp); + isp1301_otg_init(isp); /* NOTE: since we don't change this, this provides * a few more interrupts than are strictly needed. -- cgit v1.2.3 From d16f172622a7941c4fca09724ce16df5348af5fb Mon Sep 17 00:00:00 2001 From: Cliff Cai Date: Wed, 9 Dec 2009 22:21:12 -0500 Subject: USB: audio gadget: fix wTotalLength calculation The wTotalLength should contain the sum of the interface and unit descriptor sizes per the Audio Device Class specification 1.0. Reported-by: Sergey Lapin Signed-off-by: Cliff Cai Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/f_audio.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c index 0f2eee12ee9..1ff420b7d72 100644 --- a/drivers/usb/gadget/f_audio.c +++ b/drivers/usb/gadget/f_audio.c @@ -56,13 +56,16 @@ static struct usb_interface_descriptor ac_interface_desc __initdata = { DECLARE_UAC_AC_HEADER_DESCRIPTOR(2); #define UAC_DT_AC_HEADER_LENGTH UAC_DT_AC_HEADER_SIZE(F_AUDIO_NUM_INTERFACES) +/* 1 input terminal, 1 output terminal and 1 feature unit */ +#define UAC_DT_TOTAL_LENGTH (UAC_DT_AC_HEADER_LENGTH + UAC_DT_INPUT_TERMINAL_SIZE \ + + UAC_DT_OUTPUT_TERMINAL_SIZE + UAC_DT_FEATURE_UNIT_SIZE(0)) /* B.3.2 Class-Specific AC Interface Descriptor */ static struct uac_ac_header_descriptor_2 ac_header_desc = { .bLength = UAC_DT_AC_HEADER_LENGTH, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = UAC_HEADER, .bcdADC = __constant_cpu_to_le16(0x0100), - .wTotalLength = __constant_cpu_to_le16(UAC_DT_AC_HEADER_LENGTH), + .wTotalLength = __constant_cpu_to_le16(UAC_DT_TOTAL_LENGTH), .bInCollection = F_AUDIO_NUM_INTERFACES, .baInterfaceNr = { [0] = F_AUDIO_AC_INTERFACE, -- cgit v1.2.3 From feef1d952ee1e9ac074640d7029dbbe8501725c2 Mon Sep 17 00:00:00 2001 From: Cliff Cai Date: Wed, 9 Dec 2009 22:28:39 -0500 Subject: USB: audio gadget: free alsa devices when unloading Signed-off-by: Cliff Cai Signed-off-by: Mike Frysinger Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/audio.c | 1 + drivers/usb/gadget/f_audio.c | 2 +- drivers/usb/gadget/u_audio.c | 12 +++++++++--- drivers/usb/gadget/u_audio.h | 2 +- 4 files changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c index 58f22032384..a62af7b5909 100644 --- a/drivers/usb/gadget/audio.c +++ b/drivers/usb/gadget/audio.c @@ -158,6 +158,7 @@ fail: static int __exit audio_unbind(struct usb_composite_dev *cdev) { + gaudio_cleanup(); return 0; } diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c index 1ff420b7d72..df77f6131c7 100644 --- a/drivers/usb/gadget/f_audio.c +++ b/drivers/usb/gadget/f_audio.c @@ -792,7 +792,7 @@ int __init audio_bind_config(struct usb_configuration *c) return status; add_fail: - gaudio_cleanup(&audio->card); + gaudio_cleanup(); setup_fail: kfree(audio); return status; diff --git a/drivers/usb/gadget/u_audio.c b/drivers/usb/gadget/u_audio.c index 8252595d619..35e0930f5bb 100644 --- a/drivers/usb/gadget/u_audio.c +++ b/drivers/usb/gadget/u_audio.c @@ -288,6 +288,7 @@ static int gaudio_close_snd_dev(struct gaudio *gau) return 0; } +static struct gaudio *the_card; /** * gaudio_setup - setup ALSA interface and preparing for USB transfer * @@ -303,6 +304,9 @@ int __init gaudio_setup(struct gaudio *card) if (ret) ERROR(card, "we need at least one control device\n"); + if (!the_card) + the_card = card; + return ret; } @@ -312,9 +316,11 @@ int __init gaudio_setup(struct gaudio *card) * * This is called to free all resources allocated by @gaudio_setup(). */ -void gaudio_cleanup(struct gaudio *card) +void gaudio_cleanup(void) { - if (card) - gaudio_close_snd_dev(card); + if (the_card) { + gaudio_close_snd_dev(the_card); + the_card = NULL; + } } diff --git a/drivers/usb/gadget/u_audio.h b/drivers/usb/gadget/u_audio.h index cc8d159c648..08ffce3298e 100644 --- a/drivers/usb/gadget/u_audio.h +++ b/drivers/usb/gadget/u_audio.h @@ -51,6 +51,6 @@ struct gaudio { }; int gaudio_setup(struct gaudio *card); -void gaudio_cleanup(struct gaudio *card); +void gaudio_cleanup(void); #endif /* __U_AUDIO_H */ -- cgit v1.2.3 From c983202bd03eb82394ef1dce5906702fcbc7bb80 Mon Sep 17 00:00:00 2001 From: Donny Kurnia Date: Wed, 23 Dec 2009 19:03:12 +0700 Subject: USB: option: support hi speed for modem Haier CE100 I made this patch for usbserial driver to add the support for EVDO modem Haier CE100. The bugs report for this is here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/490068 This patch based on these post: http://blankblondtank.wordpress.com/2009/09/04/mengoptimalkan-koneksi-modem-haier-ce-100-cdma-di-linux/ http://tantos.web.id/blogs/how-to-internet-connection-using-cdma-evdo-modem-and-karmic-koala-ubuntu-9-10 I hope this patch can help other that have the Haier C100 modem, mostly in my country, Indonesia. Signed-off-by: Donny Kurnia Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 9a2b903492e..6e94a6711f0 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -340,6 +340,10 @@ static int option_resume(struct usb_serial *serial); #define FOUR_G_SYSTEMS_VENDOR_ID 0x1c9e #define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603 +/* Haier products */ +#define HAIER_VENDOR_ID 0x201e +#define HAIER_PRODUCT_CE100 0x2009 + static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -641,6 +645,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, { USB_DEVICE(FOUR_G_SYSTEMS_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14) }, + { USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- cgit v1.2.3 From 37e9066b2f85480d99d3795373f5ef0b00ac1189 Mon Sep 17 00:00:00 2001 From: pancho horrillo Date: Wed, 23 Dec 2009 11:09:13 +0100 Subject: USB: Fix a bug on appledisplay.c regarding signedness brightness status is reported by the Apple Cinema Displays as an 'unsigned char' (u8) value, but the code used 'char' instead. Note that he driver was developed on the PowerPC architecture, where the two types are synonymous, which is not always the case. Fixed that. Otherwise the driver will interpret brightness levels > 127 as negative, and fail to load. Signed-off-by: pancho horrillo Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/appledisplay.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index 8dc4afa38b8..1eb9e4162cc 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -73,8 +73,8 @@ struct appledisplay { struct usb_device *udev; /* usb device */ struct urb *urb; /* usb request block */ struct backlight_device *bd; /* backlight device */ - char *urbdata; /* interrupt URB data buffer */ - char *msgdata; /* control message data buffer */ + u8 *urbdata; /* interrupt URB data buffer */ + u8 *msgdata; /* control message data buffer */ struct delayed_work work; int button_pressed; -- cgit v1.2.3