From 81bb5d31fbf3893a8e041c649dea704dd11d5272 Mon Sep 17 00:00:00 2001 From: Kamal Mostafa Date: Thu, 21 Feb 2013 11:55:05 -0800 Subject: Input: cypress_ps2 - fix trackpadi found in Dell XPS12 Avoid firmware glitch in Cypress PS/2 Trackpad firmware version 11 (as observed in Dell XPS12) which prevents driver from recognizing the trackpad. BugLink: http://launchpad.net/bugs/1103594 Signed-off-by: Kamal Mostafa Cc: Dudley Du Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/cypress_ps2.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/input/mouse/cypress_ps2.c b/drivers/input/mouse/cypress_ps2.c index 1673dc6c809..f51765fff05 100644 --- a/drivers/input/mouse/cypress_ps2.c +++ b/drivers/input/mouse/cypress_ps2.c @@ -236,6 +236,13 @@ static int cypress_read_fw_version(struct psmouse *psmouse) cytp->fw_version = param[2] & FW_VERSION_MASX; cytp->tp_metrics_supported = (param[2] & TP_METRICS_MASK) ? 1 : 0; + /* + * Trackpad fw_version 11 (in Dell XPS12) yields a bogus response to + * CYTP_CMD_READ_TP_METRICS so do not try to use it. LP: #1103594. + */ + if (cytp->fw_version >= 11) + cytp->tp_metrics_supported = 0; + psmouse_dbg(psmouse, "cytp->fw_version = %d\n", cytp->fw_version); psmouse_dbg(psmouse, "cytp->tp_metrics_supported = %d\n", cytp->tp_metrics_supported); @@ -258,6 +265,9 @@ static int cypress_read_tp_metrics(struct psmouse *psmouse) cytp->tp_res_x = cytp->tp_max_abs_x / cytp->tp_width; cytp->tp_res_y = cytp->tp_max_abs_y / cytp->tp_high; + if (!cytp->tp_metrics_supported) + return 0; + memset(param, 0, sizeof(param)); if (cypress_send_ext_cmd(psmouse, CYTP_CMD_READ_TP_METRICS, param) == 0) { /* Update trackpad parameters. */ @@ -315,18 +325,15 @@ static int cypress_read_tp_metrics(struct psmouse *psmouse) static int cypress_query_hardware(struct psmouse *psmouse) { - struct cytp_data *cytp = psmouse->private; int ret; ret = cypress_read_fw_version(psmouse); if (ret) return ret; - if (cytp->tp_metrics_supported) { - ret = cypress_read_tp_metrics(psmouse); - if (ret) - return ret; - } + ret = cypress_read_tp_metrics(psmouse); + if (ret) + return ret; return 0; } -- cgit v1.2.3 From d18e53fce2f6e42bfb8ac157547dd3f804385749 Mon Sep 17 00:00:00 2001 From: Kevin Cernekee Date: Thu, 21 Feb 2013 22:58:20 -0800 Subject: Input: ALPS - remove unused argument to alps_enter_command_mode() Now that alps_identify() explicitly issues an EC report using alps_rpt_cmd(), we no longer need to look at the magic numbers returned by alps_enter_command_mode(). Signed-off-by: Kevin Cernekee Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/alps.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 7b99fc7c943..9c97531bd2c 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -994,8 +994,7 @@ static int alps_rpt_cmd(struct psmouse *psmouse, int init_command, return 0; } -static int alps_enter_command_mode(struct psmouse *psmouse, - unsigned char *resp) +static int alps_enter_command_mode(struct psmouse *psmouse) { unsigned char param[4]; @@ -1009,9 +1008,6 @@ static int alps_enter_command_mode(struct psmouse *psmouse, "unknown response while entering command mode\n"); return -1; } - - if (resp) - *resp = param[2]; return 0; } @@ -1176,7 +1172,7 @@ static int alps_passthrough_mode_v3(struct psmouse *psmouse, { int reg_val, ret = -1; - if (alps_enter_command_mode(psmouse, NULL)) + if (alps_enter_command_mode(psmouse)) return -1; reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x0008); @@ -1216,7 +1212,7 @@ static int alps_probe_trackstick_v3(struct psmouse *psmouse, int reg_base) { int ret = -EIO, reg_val; - if (alps_enter_command_mode(psmouse, NULL)) + if (alps_enter_command_mode(psmouse)) goto error; reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x08); @@ -1279,7 +1275,7 @@ static int alps_setup_trackstick_v3(struct psmouse *psmouse, int reg_base) * supported by this driver. If bit 1 isn't set the packet * format is different. */ - if (alps_enter_command_mode(psmouse, NULL) || + if (alps_enter_command_mode(psmouse) || alps_command_mode_write_reg(psmouse, reg_base + 0x08, 0x82) || alps_exit_command_mode(psmouse)) @@ -1306,7 +1302,7 @@ static int alps_hw_init_v3(struct psmouse *psmouse) alps_setup_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE) == -EIO) goto error; - if (alps_enter_command_mode(psmouse, NULL) || + if (alps_enter_command_mode(psmouse) || alps_absolute_mode_v3(psmouse)) { psmouse_err(psmouse, "Failed to enter absolute mode\n"); goto error; @@ -1381,7 +1377,7 @@ static int alps_hw_init_rushmore_v3(struct psmouse *psmouse) priv->flags &= ~ALPS_DUALPOINT; } - if (alps_enter_command_mode(psmouse, NULL) || + if (alps_enter_command_mode(psmouse) || alps_command_mode_read_reg(psmouse, 0xc2d9) == -1 || alps_command_mode_write_reg(psmouse, 0xc2cb, 0x00)) goto error; @@ -1431,7 +1427,7 @@ static int alps_hw_init_v4(struct psmouse *psmouse) struct ps2dev *ps2dev = &psmouse->ps2dev; unsigned char param[4]; - if (alps_enter_command_mode(psmouse, NULL)) + if (alps_enter_command_mode(psmouse)) goto error; if (alps_absolute_mode_v4(psmouse)) { -- cgit v1.2.3 From 75af9e56c1e309a4132d15120d7061656609b84e Mon Sep 17 00:00:00 2001 From: Dave Turvene Date: Thu, 21 Feb 2013 22:58:28 -0800 Subject: Input: ALPS - add "Dolphin V1" touchpad support These touchpads use a different protocol; they have been seen on Dell N5110, Dell 17R SE, and others. The official ALPS driver identifies them by looking for an exact match on the E7 report: 73 03 50. Dolphin V1 returns an EC report of 73 01 xx (02 and 0d have been seen); Dolphin V2 returns an EC report of 73 02 xx (02 has been seen). Dolphin V2 probably needs a different initialization sequence and/or report parser, so it is left for a future commit. Signed-off-by: Dave Turvene Signed-off-by: Kevin Cernekee Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/alps.c | 67 ++++++++++++++++++++++++++++++++++++++++++++-- drivers/input/mouse/alps.h | 1 + 2 files changed, 66 insertions(+), 2 deletions(-) diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 9c97531bd2c..0238e0e1433 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -490,6 +490,29 @@ static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p) f->y_map |= (p[5] & 0x20) << 6; } +static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p) +{ + f->first_mp = !!(p[0] & 0x02); + f->is_mp = !!(p[0] & 0x20); + + f->fingers = ((p[0] & 0x6) >> 1 | + (p[0] & 0x10) >> 2); + f->x_map = ((p[2] & 0x60) >> 5) | + ((p[4] & 0x7f) << 2) | + ((p[5] & 0x7f) << 9) | + ((p[3] & 0x07) << 16) | + ((p[3] & 0x70) << 15) | + ((p[0] & 0x01) << 22); + f->y_map = (p[1] & 0x7f) | + ((p[2] & 0x1f) << 7); + + f->x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7)); + f->y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3)); + f->z = (p[0] & 4) ? 0 : p[5] & 0x7f; + + alps_decode_buttons_v3(f, p); +} + static void alps_process_touchpad_packet_v3(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; @@ -874,7 +897,8 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse) } /* Bytes 2 - pktsize should have 0 in the highest bit */ - if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize && + if (priv->proto_version != ALPS_PROTO_V5 && + psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize && (psmouse->packet[psmouse->pktcnt - 1] & 0x80)) { psmouse_dbg(psmouse, "refusing packet[%i] = %x\n", psmouse->pktcnt - 1, @@ -1003,7 +1027,8 @@ static int alps_enter_command_mode(struct psmouse *psmouse) return -1; } - if (param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) { + if ((param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) && + param[0] != 0x73) { psmouse_dbg(psmouse, "unknown response while entering command mode\n"); return -1; @@ -1495,6 +1520,23 @@ error: return -1; } +static int alps_hw_init_dolphin_v1(struct psmouse *psmouse) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + unsigned char param[2]; + + /* This is dolphin "v1" as empirically defined by florin9doi */ + param[0] = 0x64; + param[1] = 0x28; + + if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) || + ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) || + ps2_command(ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE)) + return -1; + + return 0; +} + static void alps_set_defaults(struct alps_data *priv) { priv->byte0 = 0x8f; @@ -1528,6 +1570,21 @@ static void alps_set_defaults(struct alps_data *priv) priv->nibble_commands = alps_v4_nibble_commands; priv->addr_command = PSMOUSE_CMD_DISABLE; break; + case ALPS_PROTO_V5: + priv->hw_init = alps_hw_init_dolphin_v1; + priv->process_packet = alps_process_packet_v3; + priv->decode_fields = alps_decode_dolphin; + priv->set_abs_params = alps_set_abs_params_mt; + priv->nibble_commands = alps_v3_nibble_commands; + priv->addr_command = PSMOUSE_CMD_RESET_WRAP; + priv->byte0 = 0xc8; + priv->mask0 = 0xc8; + priv->flags = 0; + priv->x_max = 1360; + priv->y_max = 660; + priv->x_bits = 23; + priv->y_bits = 12; + break; } } @@ -1587,6 +1644,12 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv) return -EIO; if (alps_match_table(psmouse, priv, e7, ec) == 0) { + return 0; + } else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 && + ec[0] == 0x73 && ec[1] == 0x01) { + priv->proto_version = ALPS_PROTO_V5; + alps_set_defaults(priv); + return 0; } else if (ec[0] == 0x88 && ec[1] == 0x08) { priv->proto_version = ALPS_PROTO_V3; diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h index 970480551b6..eee59853b9c 100644 --- a/drivers/input/mouse/alps.h +++ b/drivers/input/mouse/alps.h @@ -16,6 +16,7 @@ #define ALPS_PROTO_V2 2 #define ALPS_PROTO_V3 3 #define ALPS_PROTO_V4 4 +#define ALPS_PROTO_V5 5 /** * struct alps_model_info - touchpad ID table -- cgit v1.2.3 From 171fb58da00277b099d5a1c5e114fa57b77c4f90 Mon Sep 17 00:00:00 2001 From: dave turvene Date: Sat, 23 Feb 2013 20:06:34 -0800 Subject: Input: ALPS - update documentation for recent touchpad driver mods Updated documentation for the new ALPS touchpad support submitted in two patchsets by Kevin Cernekee. My understanding is the most recent patchset '"Dolphin V2" touchpad support' may still need some work but Future work on the ALPS driver should not impact these documentation changes. See https://bugs.launchpad.net/ubuntu/+source/linux/+bug/606238 Signed-off-by: David Turvene Acked-by: Kevin Cernekee Signed-off-by: Dmitry Torokhov --- Documentation/input/alps.txt | 67 +++++++++++++++++++++++++++++++++++++++----- 1 file changed, 60 insertions(+), 7 deletions(-) diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt index ae8ba9a74ce..9b1084c8c0b 100644 --- a/Documentation/input/alps.txt +++ b/Documentation/input/alps.txt @@ -3,10 +3,26 @@ ALPS Touchpad Protocol Introduction ------------ - -Currently the ALPS touchpad driver supports four protocol versions in use by -ALPS touchpads, called versions 1, 2, 3, and 4. Information about the various -protocol versions is contained in the following sections. +Currently the ALPS touchpad driver supports five protocol versions in use by +ALPS touchpads, called versions 1, 2, 3, 4 and 5. + +Since roughly mid-2010 several new ALPS touchpads have been released and +integrated into a variety of laptops and netbooks. These new touchpads +have enough behavior differences that the alps_model_data definition +table, describing the properties of the different versions, is no longer +adequate. The design choices were to re-define the alps_model_data +table, with the risk of regression testing existing devices, or isolate +the new devices outside of the alps_model_data table. The latter design +choice was made. The new touchpad signatures are named: "Rushmore", +"Pinnacle", and "Dolphin", which you will see in the alps.c code. +For the purposes of this document, this group of ALPS touchpads will +generically be called "new ALPS touchpads". + +We experimented with probing the ACPI interface _HID (Hardware ID)/_CID +(Compatibility ID) definition as a way to uniquely identify the +different ALPS variants but there did not appear to be a 1:1 mapping. +In fact, it appeared to be an m:n mapping between the _HID and actual +hardware type. Detection --------- @@ -20,9 +36,13 @@ If the E6 report is successful, the touchpad model is identified using the "E7 report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is matched against known models in the alps_model_data_array. -With protocol versions 3 and 4, the E7 report model signature is always -73-02-64. To differentiate between these versions, the response from the -"Enter Command Mode" sequence must be inspected as described below. +For older touchpads supporting protocol versions 3 and 4, the E7 report +model signature is always 73-02-64. To differentiate between these +versions, the response from the "Enter Command Mode" sequence must be +inspected as described below. + +The new ALPS touchpads have an E7 signature of 73-03-50 or 73-03-0A but +seem to be better differentiated by the EC Command Mode response. Command Mode ------------ @@ -47,6 +67,14 @@ address of the register being read, and the third contains the value of the register. Registers are written by writing the value one nibble at a time using the same encoding used for addresses. +For the new ALPS touchpads, the EC command is used to enter command +mode. The response in the new ALPS touchpads is significantly different, +and more important in determining the behavior. This code has been +separated from the original alps_model_data table and put in the +alps_identify function. For example, there seem to be two hardware init +sequences for the "Dolphin" touchpads as determined by the second byte +of the EC response. + Packet Format ------------- @@ -187,3 +215,28 @@ There are several things worth noting here. well. So far no v4 devices with tracksticks have been encountered. + +ALPS Absolute Mode - Protocol Version 5 +--------------------------------------- +This is basically Protocol Version 3 but with different logic for packet +decode. It uses the same alps_process_touchpad_packet_v3 call with a +specialized decode_fields function pointer to correctly interpret the +packets. This appears to only be used by the Dolphin devices. + +For single-touch, the 6-byte packet format is: + + byte 0: 1 1 0 0 1 0 0 0 + byte 1: 0 x6 x5 x4 x3 x2 x1 x0 + byte 2: 0 y6 y5 y4 y3 y2 y1 y0 + byte 3: 0 M R L 1 m r l + byte 4: y10 y9 y8 y7 x10 x9 x8 x7 + byte 5: 0 z6 z5 z4 z3 z2 z1 z0 + +For mt, the format is: + + byte 0: 1 1 1 n3 1 n2 n1 x24 + byte 1: 1 y7 y6 y5 y4 y3 y2 y1 + byte 2: ? x2 x1 y12 y11 y10 y9 y8 + byte 3: 0 x23 x22 x21 x20 x19 x18 x17 + byte 4: 0 x9 x8 x7 x6 x5 x4 x3 + byte 5: 0 x16 x15 x14 x13 x12 x11 x10 -- cgit v1.2.3 From 586948372189d33ceca9d89fb0c791ef4d53d8ad Mon Sep 17 00:00:00 2001 From: Stephan Frank Date: Thu, 7 Mar 2013 14:08:50 -0800 Subject: Input: wacom - add support for 0x10d It is a Wacom device found in Fujitsu Lifebook T902. Signed-off-by: Stephan Frank Acked-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 41b6fbf6011..1daa97913b7 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -2017,6 +2017,9 @@ static const struct wacom_features wacom_features_0x100 = static const struct wacom_features wacom_features_0x101 = { "Wacom ISDv4 101", WACOM_PKGLEN_MTTPC, 26202, 16325, 255, 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0x10D = + { "Wacom ISDv4 10D", WACOM_PKGLEN_MTTPC, 26202, 16325, 255, + 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x4001 = { "Wacom ISDv4 4001", WACOM_PKGLEN_MTTPC, 26202, 16325, 255, 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; @@ -2201,6 +2204,7 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xEF) }, { USB_DEVICE_WACOM(0x100) }, { USB_DEVICE_WACOM(0x101) }, + { USB_DEVICE_WACOM(0x10D) }, { USB_DEVICE_WACOM(0x4001) }, { USB_DEVICE_WACOM(0x47) }, { USB_DEVICE_WACOM(0xF4) }, -- cgit v1.2.3 From 39735019716e93914a366ac1fb2e78f91b170545 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Sat, 9 Mar 2013 16:17:20 -0800 Subject: Input: tc3589x-keypad - fix keymap size The keymap size used by tc3589x is too low, leading to the driver overwriting other people's memory. Fix this by making the driver use the automatically allocated keymap provided by matrix_keypad_build_keymap() instead of allocating one on its own. Signed-off-by: Rabin Vincent Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/tc3589x-keypad.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c index 2fb0d76a04c..208de7cbb7f 100644 --- a/drivers/input/keyboard/tc3589x-keypad.c +++ b/drivers/input/keyboard/tc3589x-keypad.c @@ -70,8 +70,6 @@ #define TC3589x_EVT_INT_CLR 0x2 #define TC3589x_KBD_INT_CLR 0x1 -#define TC3589x_KBD_KEYMAP_SIZE 64 - /** * struct tc_keypad - data structure used by keypad driver * @tc3589x: pointer to tc35893 @@ -88,7 +86,7 @@ struct tc_keypad { const struct tc3589x_keypad_platform_data *board; unsigned int krow; unsigned int kcol; - unsigned short keymap[TC3589x_KBD_KEYMAP_SIZE]; + unsigned short *keymap; bool keypad_stopped; }; @@ -338,12 +336,14 @@ static int tc3589x_keypad_probe(struct platform_device *pdev) error = matrix_keypad_build_keymap(plat->keymap_data, NULL, TC3589x_MAX_KPROW, TC3589x_MAX_KPCOL, - keypad->keymap, input); + NULL, input); if (error) { dev_err(&pdev->dev, "Failed to build keymap\n"); goto err_free_mem; } + keypad->keymap = input->keycode; + input_set_capability(input, EV_MSC, MSC_SCAN); if (!plat->no_autorepeat) __set_bit(EV_REP, input->evbit); -- cgit v1.2.3 From f94352f8db97b9a3b3c1ec45f6fef1400880168a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 3 Mar 2013 20:19:07 -0800 Subject: Input: ads7864 - check return value of regulator enable At least print a warning if we can't power the device up. Signed-off-by: Mark Brown Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/ads7846.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 4f702b3ec1a..434c3df250c 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -236,7 +236,12 @@ static void __ads7846_disable(struct ads7846 *ts) /* Must be called with ts->lock held */ static void __ads7846_enable(struct ads7846 *ts) { - regulator_enable(ts->reg); + int error; + + error = regulator_enable(ts->reg); + if (error != 0) + dev_err(&ts->spi->dev, "Failed to enable supply: %d\n", error); + ads7846_restart(ts); } -- cgit v1.2.3 From 4b7d293c64fde133cc2b669d0d7637b8a4c6d62f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 3 Mar 2013 20:21:30 -0800 Subject: Input: mms114 - Fix regulator enable and disable paths When it uses regulators the mms114 driver checks to see if it managed to acquire regulators and ignores errors. This is not the intended usage and not great style in general. Since the driver already refuses to probe if it fails to allocate the regulators simply make the enable and disable calls unconditional and add appropriate error handling, including adding cleanup of the regulators if setup_reg() fails. Signed-off-by: Mark Brown Acked-by: Joonyoung Shim Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/mms114.c | 34 +++++++++++++++++++++++++--------- 1 file changed, 25 insertions(+), 9 deletions(-) diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c index 4a29ddf6bf1..1443532fe6c 100644 --- a/drivers/input/touchscreen/mms114.c +++ b/drivers/input/touchscreen/mms114.c @@ -314,15 +314,27 @@ static int mms114_start(struct mms114_data *data) struct i2c_client *client = data->client; int error; - if (data->core_reg) - regulator_enable(data->core_reg); - if (data->io_reg) - regulator_enable(data->io_reg); + error = regulator_enable(data->core_reg); + if (error) { + dev_err(&client->dev, "Failed to enable avdd: %d\n", error); + return error; + } + + error = regulator_enable(data->io_reg); + if (error) { + dev_err(&client->dev, "Failed to enable vdd: %d\n", error); + regulator_disable(data->core_reg); + return error; + } + mdelay(MMS114_POWERON_DELAY); error = mms114_setup_regs(data); - if (error < 0) + if (error < 0) { + regulator_disable(data->io_reg); + regulator_disable(data->core_reg); return error; + } if (data->pdata->cfg_pin) data->pdata->cfg_pin(true); @@ -335,16 +347,20 @@ static int mms114_start(struct mms114_data *data) static void mms114_stop(struct mms114_data *data) { struct i2c_client *client = data->client; + int error; disable_irq(client->irq); if (data->pdata->cfg_pin) data->pdata->cfg_pin(false); - if (data->io_reg) - regulator_disable(data->io_reg); - if (data->core_reg) - regulator_disable(data->core_reg); + error = regulator_disable(data->io_reg); + if (error) + dev_warn(&client->dev, "Failed to disable vdd: %d\n", error); + + error = regulator_disable(data->core_reg); + if (error) + dev_warn(&client->dev, "Failed to disable avdd: %d\n", error); } static int mms114_input_open(struct input_dev *dev) -- cgit v1.2.3