From 7676e345824f162191b1fe2058ad948a6cf91c20 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 19 May 2011 21:32:57 +0900 Subject: IPVS: Free resources on module removal This resolves a panic on module removal. Reported-by: Dave Jones Acked-by: Julian Anastasov Signed-off-by: Hans Schillstrom Signed-off-by: Simon Horman --- net/netfilter/ipvs/ip_vs_ctl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index 699c79a5565..a178cb34584 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -3771,6 +3771,7 @@ err_sock: void ip_vs_control_cleanup(void) { EnterFunction(2); + unregister_netdevice_notifier(&ip_vs_dst_notifier); ip_vs_genl_unregister(); nf_unregister_sockopt(&ip_vs_sockopts); LeaveFunction(2); -- cgit v1.2.3 From 4203223a1aed862b4445fdcd260d6139603a51d9 Mon Sep 17 00:00:00 2001 From: Tushar Gohad Date: Thu, 28 Jul 2011 10:36:20 +0000 Subject: xfrm: Fix key lengths for rfc3686(ctr(aes)) Fix the min and max bit lengths for AES-CTR (RFC3686) keys. The number of bits in key spec is the key length (128/256) plus 32 bits of nonce. This change takes care of the "Invalid key length" errors reported by setkey when specifying 288 bit keys for aes-ctr. Signed-off-by: Tushar Gohad Acked-by: Herbert Xu Signed-off-by: David S. Miller --- net/xfrm/xfrm_algo.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/xfrm/xfrm_algo.c b/net/xfrm/xfrm_algo.c index 58064d9e565..791ab2e77f3 100644 --- a/net/xfrm/xfrm_algo.c +++ b/net/xfrm/xfrm_algo.c @@ -462,8 +462,8 @@ static struct xfrm_algo_desc ealg_list[] = { .desc = { .sadb_alg_id = SADB_X_EALG_AESCTR, .sadb_alg_ivlen = 8, - .sadb_alg_minbits = 128, - .sadb_alg_maxbits = 256 + .sadb_alg_minbits = 160, + .sadb_alg_maxbits = 288 } }, }; -- cgit v1.2.3 From fe66101f14813b77d84f6450d51772a2af2b81a1 Mon Sep 17 00:00:00 2001 From: Klement Fish Date: Thu, 28 Jul 2011 06:03:22 +0000 Subject: sis190: Rx filter init is needed for MAC address change. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=34552 Signed-off-by: Klement Fish Acked-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/sis190.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c index 8ad7bfbaa3a..3c0f1312b39 100644 --- a/drivers/net/sis190.c +++ b/drivers/net/sis190.c @@ -1825,6 +1825,16 @@ static int sis190_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) generic_mii_ioctl(&tp->mii_if, if_mii(ifr), cmd, NULL); } +static int sis190_mac_addr(struct net_device *dev, void *p) +{ + int rc; + + rc = eth_mac_addr(dev, p); + if (!rc) + sis190_init_rxfilter(dev); + return rc; +} + static const struct net_device_ops sis190_netdev_ops = { .ndo_open = sis190_open, .ndo_stop = sis190_close, @@ -1833,7 +1843,7 @@ static const struct net_device_ops sis190_netdev_ops = { .ndo_tx_timeout = sis190_tx_timeout, .ndo_set_multicast_list = sis190_set_rx_mode, .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, + .ndo_set_mac_address = sis190_mac_addr, .ndo_validate_addr = eth_validate_addr, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = sis190_netpoll, -- cgit v1.2.3 From c173bfac2428bd6c5da5d7cc8942b8b85d0819d4 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 28 Jul 2011 10:54:23 +0000 Subject: MAINTAINERS: orphan FrameRelay DLCI Mike McLagan hasn't contributed in many years and his email bounces. Signed-off-by: Joe Perches Cc: David Miller Cc: Stephen Hemminger Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 1d2e79db0f5..a99fed1a3d8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2637,9 +2637,8 @@ S: Maintained F: arch/x86/math-emu/ FRAME RELAY DLCI/FRAD (Sangoma drivers too) -M: Mike McLagan L: netdev@vger.kernel.org -S: Maintained +S: Orphan F: drivers/net/wan/dlci.c F: drivers/net/wan/sdla.c -- cgit v1.2.3 From 93a3aa25933461d76141179fc94aa32d5f9d954a Mon Sep 17 00:00:00 2001 From: Lennart Sorensen Date: Thu, 28 Jul 2011 13:18:11 +0000 Subject: r8169: Add support for D-Link 530T rev C1 (Kernel Bug 38862) The D-Link DGE-530T rev C1 is a re-badged Realtek 8169 named DLG10028C, unlike the previous revisions which were skge based. It is probably the same as the discontinued DGE-528T (0x4300) other than the PCI ID. The PCI ID is 0x1186:0x4302. Adding it to r8169.c where 0x1186:0x4300 is already found makes the card be detected and work. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=38862 Signed-off-by: Len Sorensen Signed-off-by: David S. Miller --- drivers/net/r8169.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 7d9c650f395..c77286edba4 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -239,6 +239,7 @@ static DEFINE_PCI_DEVICE_TABLE(rtl8169_pci_tbl) = { { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8168), 0, 0, RTL_CFG_1 }, { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169), 0, 0, RTL_CFG_0 }, { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4300), 0, 0, RTL_CFG_0 }, + { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4302), 0, 0, RTL_CFG_0 }, { PCI_DEVICE(PCI_VENDOR_ID_AT, 0xc107), 0, 0, RTL_CFG_0 }, { PCI_DEVICE(0x16ec, 0x0116), 0, 0, RTL_CFG_0 }, { PCI_VENDOR_ID_LINKSYS, 0x1032, -- cgit v1.2.3 From 177c27bf05d0ea508e65afdbe4b6998c81e46af5 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 28 Jul 2011 06:54:36 +0000 Subject: net: fix new sunrpc kernel-doc warning Fix new kernel-doc warning in sunrpc: Warning(net/sunrpc/xprt.c:196): No description found for parameter 'xprt' Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- net/sunrpc/xprt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index 9b6a4d1ea8f..f4385e45a5f 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -187,6 +187,7 @@ EXPORT_SYMBOL_GPL(xprt_load_transport); /** * xprt_reserve_xprt - serialize write access to transports * @task: task that is requesting access to the transport + * @xprt: pointer to the target transport * * This prevents mixing the payload of separate requests, and prevents * transport connects from colliding with writes. No congestion control -- cgit v1.2.3 From 9e8f90dfe58eb19140bc66655170c7aef9eadbf2 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Thu, 28 Jul 2011 18:26:32 -0700 Subject: proc_fork_connector: a lockless ->real_parent usage is not safe proc_fork_connector() uses ->real_parent lockless. This is not safe if copy_process() was called with CLONE_THREAD or CLONE_PARENT, in this case the parent != current can go away at any moment. Signed-off-by: Oleg Nesterov Cc: Vladimir Zapolskiy Cc: "David S. Miller" Cc: Evgeniy Polyakov Cc: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/connector/cn_proc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/connector/cn_proc.c b/drivers/connector/cn_proc.c index 3ee1fdb31ea..e55814bc0d0 100644 --- a/drivers/connector/cn_proc.c +++ b/drivers/connector/cn_proc.c @@ -57,6 +57,7 @@ void proc_fork_connector(struct task_struct *task) struct proc_event *ev; __u8 buffer[CN_PROC_MSG_SIZE]; struct timespec ts; + struct task_struct *parent; if (atomic_read(&proc_event_num_listeners) < 1) return; @@ -67,8 +68,11 @@ void proc_fork_connector(struct task_struct *task) ktime_get_ts(&ts); /* get high res monotonic timestamp */ put_unaligned(timespec_to_ns(&ts), (__u64 *)&ev->timestamp_ns); ev->what = PROC_EVENT_FORK; - ev->event_data.fork.parent_pid = task->real_parent->pid; - ev->event_data.fork.parent_tgid = task->real_parent->tgid; + rcu_read_lock(); + parent = rcu_dereference(task->real_parent); + ev->event_data.fork.parent_pid = parent->pid; + ev->event_data.fork.parent_tgid = parent->tgid; + rcu_read_unlock(); ev->event_data.fork.child_pid = task->pid; ev->event_data.fork.child_tgid = task->tgid; -- cgit v1.2.3 From 2a1690d8cd5b7a4271f993f59a4484d41e2884c3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 1 Aug 2011 02:23:15 -0700 Subject: MAINTAINERS: Remove Pekka Savola from ipv6. Signed-off-by: David S. Miller --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index a99fed1a3d8..5d4ceba0e96 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4443,7 +4443,6 @@ F: include/linux/netdevice.h NETWORKING [IPv4/IPv6] M: "David S. Miller" M: Alexey Kuznetsov -M: "Pekka Savola (ipv6)" M: James Morris M: Hideaki YOSHIFUJI M: Patrick McHardy -- cgit v1.2.3 From a1889c0d2039a53ae04abb9f20c62500bd312bf3 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 28 Jul 2011 02:46:01 +0000 Subject: net: adjust array index Convert array index from the loop bound to the loop index. A simplified version of the semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression e1,e2,ar; @@ for(e1 = 0; e1 < e2; e1++) { <... ar[ - e2 + e1 ] ...> } // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- net/ipv4/igmp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index f1d27f6c935..283c0a26e03 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -1718,7 +1718,7 @@ static int ip_mc_add_src(struct in_device *in_dev, __be32 *pmca, int sfmode, pmc->sfcount[sfmode]--; for (j=0; jsfcount[MCAST_EXCLUDE] != 0)) { #ifdef CONFIG_IP_MULTICAST struct ip_sf_list *psf; -- cgit v1.2.3 From 956837f7c954443f426a82ba6f17b33488cf9a0c Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 28 Jul 2011 02:46:03 +0000 Subject: drivers/net/niu.c: adjust array index Convert array index from the loop bound to the loop index. A simplified version of the semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression e1,e2,ar; @@ for(e1 = 0; e1 < e2; e1++) { <... ar[ - e2 + e1 ] ...> } // Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/niu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/niu.c b/drivers/net/niu.c index cd6c2317e29..ed47585a686 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -9201,7 +9201,7 @@ static int __devinit niu_ldg_init(struct niu *np) first_chan = 0; for (i = 0; i < port; i++) - first_chan += parent->rxchan_per_port[port]; + first_chan += parent->rxchan_per_port[i]; num_chan = parent->rxchan_per_port[port]; for (i = first_chan; i < (first_chan + num_chan); i++) { @@ -9217,7 +9217,7 @@ static int __devinit niu_ldg_init(struct niu *np) first_chan = 0; for (i = 0; i < port; i++) - first_chan += parent->txchan_per_port[port]; + first_chan += parent->txchan_per_port[i]; num_chan = parent->txchan_per_port[port]; for (i = first_chan; i < (first_chan + num_chan); i++) { err = niu_ldg_assign_ldn(np, parent, -- cgit v1.2.3 From e1738bd9cecc5c867b0e2996470c1ff20f66ba79 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 29 Jul 2011 19:22:42 +0000 Subject: sch_sfq: fix sfq_enqueue() commit 8efa88540635 (sch_sfq: avoid giving spurious NET_XMIT_CN signals) forgot to call qdisc_tree_decrease_qlen() to signal upper levels that a packet (from another flow) was dropped, leading to various problems. With help from Michal Soltys and Michal Pokrywka, who did a bisection. Bugzilla ref: https://bugzilla.kernel.org/show_bug.cgi?id=39372 Debian ref: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=631945 Reported-by: Lucas Bocchi Reported-and-bisected-by: Michal Pokrywka Signed-off-by: Eric Dumazet CC: Michal Soltys Acked-by: Patrick McHardy Signed-off-by: David S. Miller --- net/sched/sch_sfq.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c index 4536ee64383..4f5510e2bd6 100644 --- a/net/sched/sch_sfq.c +++ b/net/sched/sch_sfq.c @@ -410,7 +410,12 @@ sfq_enqueue(struct sk_buff *skb, struct Qdisc *sch) /* Return Congestion Notification only if we dropped a packet * from this flow. */ - return (qlen != slot->qlen) ? NET_XMIT_CN : NET_XMIT_SUCCESS; + if (qlen != slot->qlen) + return NET_XMIT_CN; + + /* As we dropped a packet, better let upper stack know this */ + qdisc_tree_decrease_qlen(sch, 1); + return NET_XMIT_SUCCESS; } static struct sk_buff * -- cgit v1.2.3 From c1227340ca65c2069222a956a68b6842d460c4f4 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 27 Jul 2011 15:01:02 +0200 Subject: ath9k: initialize tx chainmask before testing channel tx power values With an uninitialized chainmask, the per-channel power will only contain the power limits for a single chain instead of the combined tx power. Signed-off-by: Felix Fietkau Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/init.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index dceaa4a8281..2e9634641c4 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -669,8 +669,10 @@ static void ath9k_init_band_txpower(struct ath_softc *sc, int band) static void ath9k_init_txpower_limits(struct ath_softc *sc) { struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(sc->sc_ah); struct ath9k_channel *curchan = ah->curchan; + ah->txchainmask = common->tx_chainmask; if (ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ) ath9k_init_band_txpower(sc, IEEE80211_BAND_2GHZ); if (ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ) -- cgit v1.2.3 From 17e859a899712d16c3e70b045d61ad9e02c53f8a Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 27 Jul 2011 15:37:43 +0200 Subject: iwlegacy: set tx power after rxon_assoc If settings of tx power was deferred during scan or changing channel we have to setup them during commit rxon. Fix problem on 3945 (4965 already has this fix). Optimize code to apply tx settings only when tx power was actually changed. Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/iwl-3945.c | 6 +++++- drivers/net/wireless/iwlegacy/iwl-4965.c | 8 ++++++-- 2 files changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/iwlegacy/iwl-3945.c b/drivers/net/wireless/iwlegacy/iwl-3945.c index dab67a12d73..73fe3cdf796 100644 --- a/drivers/net/wireless/iwlegacy/iwl-3945.c +++ b/drivers/net/wireless/iwlegacy/iwl-3945.c @@ -1746,7 +1746,11 @@ int iwl3945_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) } memcpy(active_rxon, staging_rxon, sizeof(*active_rxon)); - + /* + * We do not commit tx power settings while channel changing, + * do it now if tx power changed. + */ + iwl_legacy_set_tx_power(priv, priv->tx_power_next, false); return 0; } diff --git a/drivers/net/wireless/iwlegacy/iwl-4965.c b/drivers/net/wireless/iwlegacy/iwl-4965.c index bd4b000733f..ecdc6e55742 100644 --- a/drivers/net/wireless/iwlegacy/iwl-4965.c +++ b/drivers/net/wireless/iwlegacy/iwl-4965.c @@ -1235,7 +1235,12 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *c memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon)); iwl_legacy_print_rx_config_cmd(priv, ctx); - goto set_tx_power; + /* + * We do not commit tx power settings while channel changing, + * do it now if tx power changed. + */ + iwl_legacy_set_tx_power(priv, priv->tx_power_next, false); + return 0; } /* If we are currently associated and the new config requires @@ -1315,7 +1320,6 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *c iwl4965_init_sensitivity(priv); -set_tx_power: /* If we issue a new RXON command which required a tune then we must * send a new TXPOWER command or we won't be able to Tx any frames */ ret = iwl_legacy_set_tx_power(priv, priv->tx_power_next, true); -- cgit v1.2.3 From 84404623da45aac04595a8f5760a58df0e955d87 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 29 Jul 2011 11:52:18 +0300 Subject: cfg80211: off by one in nl80211_trigger_scan() The test is off by one so we'd read past the end of the wiphy->bands[] array on the next line. Signed-off-by: Dan Carpenter Signed-off-by: John W. Linville --- net/wireless/nl80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 28d2aa109be..e83e7fee3bc 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3464,7 +3464,7 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info) tmp) { enum ieee80211_band band = nla_type(attr); - if (band < 0 || band > IEEE80211_NUM_BANDS) { + if (band < 0 || band >= IEEE80211_NUM_BANDS) { err = -EINVAL; goto out_free; } -- cgit v1.2.3 From d4930086bdd0c08a8b3a4d66a9c702297cb74a99 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Fri, 29 Jul 2011 15:59:08 +0200 Subject: ath9k: skip ->config_pci_powersave() if PCIe port has ASPM disabled We receive many bug reports about system hang during suspend/resume when ath9k driver is in use. Adrian Chadd remarked that this problem happens on systems that have ASPM disabled. To do not hit the bug, skip doing ->config_pci_powersave magic if PCIe downstream port device, which ath9k device is connected to, has ASPM disabled. Bug was introduced by: commit 53bc7aa08b48e5cd745f986731cc7dc24eef2a9f Author: Vivek Natarajan Date: Mon Apr 5 14:48:04 2010 +0530 ath9k: Add support for newer AR9285 chipsets. Patch should address: https://bugzilla.kernel.org/show_bug.cgi?id=37462 https://bugzilla.kernel.org/show_bug.cgi?id=37082 https://bugzilla.redhat.com/show_bug.cgi?id=697157 however I did not receive confirmation about that, except from Camilo Mesias, whose system stops hang regularly with this patch (but still hangs from time to time, but this is probably some other bug). Tested-by: Camilo Mesias Cc: stable@kernel.org # 2.6.35+ Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9002_hw.c | 6 +----- drivers/net/wireless/ath/ath9k/ar9003_hw.c | 6 +----- drivers/net/wireless/ath/ath9k/hw.c | 11 +++++++++-- drivers/net/wireless/ath/ath9k/hw.h | 3 ++- drivers/net/wireless/ath/ath9k/pci.c | 27 +++++++++++++++++++++++++++ 5 files changed, 40 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c index 9ff7c30573b..44d9d8d5649 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c @@ -309,11 +309,7 @@ static void ar9002_hw_configpcipowersave(struct ath_hw *ah, u8 i; u32 val; - if (ah->is_pciexpress != true) - return; - - /* Do not touch SerDes registers */ - if (ah->config.pcie_powersave_enable == 2) + if (ah->is_pciexpress != true || ah->aspm_enabled != true) return; /* Nothing to do on restore for 11N */ diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c index 8efdec247c0..ad2bb2bf4e8 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c @@ -519,11 +519,7 @@ static void ar9003_hw_configpcipowersave(struct ath_hw *ah, int restore, int power_off) { - if (ah->is_pciexpress != true) - return; - - /* Do not touch SerDes registers */ - if (ah->config.pcie_powersave_enable == 2) + if (ah->is_pciexpress != true || ah->aspm_enabled != true) return; /* Nothing to do on restore for 11N */ diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 8006ce0c735..8dcefe74f4c 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -318,6 +318,14 @@ static void ath9k_hw_disablepcie(struct ath_hw *ah) REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000); } +static void ath9k_hw_aspm_init(struct ath_hw *ah) +{ + struct ath_common *common = ath9k_hw_common(ah); + + if (common->bus_ops->aspm_init) + common->bus_ops->aspm_init(common); +} + /* This should work for all families including legacy */ static bool ath9k_hw_chip_test(struct ath_hw *ah) { @@ -378,7 +386,6 @@ static void ath9k_hw_init_config(struct ath_hw *ah) ah->config.additional_swba_backoff = 0; ah->config.ack_6mb = 0x0; ah->config.cwm_ignore_extcca = 0; - ah->config.pcie_powersave_enable = 0; ah->config.pcie_clock_req = 0; ah->config.pcie_waen = 0; ah->config.analog_shiftreg = 1; @@ -598,7 +605,7 @@ static int __ath9k_hw_init(struct ath_hw *ah) if (ah->is_pciexpress) - ath9k_hw_configpcipowersave(ah, 0, 0); + ath9k_hw_aspm_init(ah); else ath9k_hw_disablepcie(ah); diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 6acd0f975ae..c79889036ec 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -219,7 +219,6 @@ struct ath9k_ops_config { int additional_swba_backoff; int ack_6mb; u32 cwm_ignore_extcca; - u8 pcie_powersave_enable; bool pcieSerDesWrite; u8 pcie_clock_req; u32 pcie_waen; @@ -673,6 +672,7 @@ struct ath_hw { bool sw_mgmt_crypto; bool is_pciexpress; + bool aspm_enabled; bool is_monitoring; bool need_an_top2_fixup; u16 tx_trig_level; @@ -874,6 +874,7 @@ struct ath_bus_ops { bool (*eeprom_read)(struct ath_common *common, u32 off, u16 *data); void (*bt_coex_prep)(struct ath_common *common); void (*extn_synch_en)(struct ath_common *common); + void (*aspm_init)(struct ath_common *common); }; static inline struct ath_common *ath9k_hw_common(struct ath_hw *ah) diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index 3bad0b2cf9a..be4ea132981 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -16,6 +16,7 @@ #include #include +#include #include #include "ath9k.h" @@ -115,12 +116,38 @@ static void ath_pci_extn_synch_enable(struct ath_common *common) pci_write_config_byte(pdev, sc->sc_ah->caps.pcie_lcr_offset, lnkctl); } +static void ath_pci_aspm_init(struct ath_common *common) +{ + struct ath_softc *sc = (struct ath_softc *) common->priv; + struct ath_hw *ah = sc->sc_ah; + struct pci_dev *pdev = to_pci_dev(sc->dev); + struct pci_dev *parent; + int pos; + u8 aspm; + + if (!pci_is_pcie(pdev)) + return; + + parent = pdev->bus->self; + if (WARN_ON(!parent)) + return; + + pos = pci_pcie_cap(parent); + pci_read_config_byte(parent, pos + PCI_EXP_LNKCTL, &aspm); + if (aspm & (PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1)) { + ah->aspm_enabled = true; + /* Initialize PCIe PM and SERDES registers. */ + ath9k_hw_configpcipowersave(ah, 0, 0); + } +} + static const struct ath_bus_ops ath_pci_bus_ops = { .ath_bus_type = ATH_PCI, .read_cachesize = ath_pci_read_cachesize, .eeprom_read = ath_pci_eeprom_read, .bt_coex_prep = ath_pci_bt_coex_prep, .extn_synch_en = ath_pci_extn_synch_enable, + .aspm_init = ath_pci_aspm_init, }; static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) -- cgit v1.2.3 From b6b67df3f24c45af0012ee3c8af2f62ca083ae18 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 29 Jul 2011 10:53:12 -0500 Subject: rtlwifi: Fix kernel oops on ARM SOC This driver uses information from the self member of the pci_bus struct to get information regarding the bridge to which the PCIe device is attached. Unfortunately, this member is not established on all architectures, which leads to a kernel oops. Skipping the entire block that uses the self member to determine the bridge vendor will only affect RTL8192DE devices as that driver sets the ASPM support flag differently when the bridge vendor is Intel. If the self member is available, there is no functional change. This patch fixes Bugzilla No. 40212. Reported-by: Hubert Liao Signed-off-by: Larry Finger Cc: Stable [back to 2.6.38] Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/pci.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 5efd5783348..56f12358389 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -1696,15 +1696,17 @@ static bool _rtl_pci_find_adapter(struct pci_dev *pdev, pcipriv->ndis_adapter.devnumber = PCI_SLOT(pdev->devfn); pcipriv->ndis_adapter.funcnumber = PCI_FUNC(pdev->devfn); - /*find bridge info */ - pcipriv->ndis_adapter.pcibridge_vendorid = bridge_pdev->vendor; - for (tmp = 0; tmp < PCI_BRIDGE_VENDOR_MAX; tmp++) { - if (bridge_pdev->vendor == pcibridge_vendors[tmp]) { - pcipriv->ndis_adapter.pcibridge_vendor = tmp; - RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, - ("Pci Bridge Vendor is found index: %d\n", - tmp)); - break; + if (bridge_pdev) { + /*find bridge info if available */ + pcipriv->ndis_adapter.pcibridge_vendorid = bridge_pdev->vendor; + for (tmp = 0; tmp < PCI_BRIDGE_VENDOR_MAX; tmp++) { + if (bridge_pdev->vendor == pcibridge_vendors[tmp]) { + pcipriv->ndis_adapter.pcibridge_vendor = tmp; + RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, + ("Pci Bridge Vendor is found index:" + " %d\n", tmp)); + break; + } } } -- cgit v1.2.3 From b52398b6e4522176dd125722c72c301015d24520 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Sat, 30 Jul 2011 13:32:56 +0200 Subject: rt2x00: rt2800: fix zeroing skb structure We should clear skb->data not skb itself. Bug was introduced by: commit 0b8004aa12d13ec750d102ba4082a95f0107c649 "rt2x00: Properly reserve room for descriptors in skbs". Cc: stable@kernel.org # 2.6.36+ Signed-off-by: Stanislaw Gruszka Acked-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 75d2c6cc93e..f94d669ed83 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -703,8 +703,7 @@ void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc) /* * Add space for the TXWI in front of the skb. */ - skb_push(entry->skb, TXWI_DESC_SIZE); - memset(entry->skb, 0, TXWI_DESC_SIZE); + memset(skb_push(entry->skb, TXWI_DESC_SIZE), 0, TXWI_DESC_SIZE); /* * Register descriptor details in skb frame descriptor. -- cgit v1.2.3 From a08af810cdc29d2ca930e8a869d3d01744c392d8 Mon Sep 17 00:00:00 2001 From: Chas Williams Date: Mon, 1 Aug 2011 17:56:14 -0700 Subject: atm: br2864: sent packets truncated in VC routed mode Reported-by: Pascal Hambourg Signed-off-by: Chas Williams Signed-off-by: David S. Miller --- net/atm/br2684.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/net/atm/br2684.c b/net/atm/br2684.c index 2252c2085da..52cfd0c3ea7 100644 --- a/net/atm/br2684.c +++ b/net/atm/br2684.c @@ -242,8 +242,6 @@ static int br2684_xmit_vcc(struct sk_buff *skb, struct net_device *dev, if (brdev->payload == p_bridged) { skb_push(skb, 2); memset(skb->data, 0, 2); - } else { /* p_routed */ - skb_pull(skb, ETH_HLEN); } } skb_debug(skb); -- cgit v1.2.3 From 87a0874cf19f1bc9bd25bd7d053a0ea25ccf8373 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Mon, 1 Aug 2011 11:10:26 +0000 Subject: doc: Update the MAINTAINERS info for Paul Moore My @hp.com will no longer be valid starting August 5, 2011 so an update is necessary. My new email address is employer independent so we don't have to worry about doing this again any time soon. Signed-off-by: Paul Moore Signed-off-by: Paul Moore Signed-off-by: David S. Miller --- MAINTAINERS | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 5d4ceba0e96..ca87f470e54 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4395,10 +4395,10 @@ F: net/*/netfilter/ F: net/netfilter/ NETLABEL -M: Paul Moore +M: Paul Moore W: http://netlabel.sf.net L: netdev@vger.kernel.org -S: Supported +S: Maintained F: Documentation/netlabel/ F: include/net/netlabel.h F: net/netlabel/ @@ -4455,7 +4455,7 @@ F: include/net/ip* F: arch/x86/net/* NETWORKING [LABELED] (NetLabel, CIPSO, Labeled IPsec, SECMARK) -M: Paul Moore +M: Paul Moore L: netdev@vger.kernel.org S: Maintained -- cgit v1.2.3 From 82c21bfab41a77bc01affe21bea9727d776774a7 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Mon, 1 Aug 2011 11:10:33 +0000 Subject: doc: Update the email address for Paul Moore in various source files My @hp.com will no longer be valid starting August 5, 2011 so an update is necessary. My new email address is employer independent so we don't have to worry about doing this again any time soon. Signed-off-by: Paul Moore Signed-off-by: Paul Moore Signed-off-by: David S. Miller --- include/net/cipso_ipv4.h | 2 +- include/net/netlabel.h | 2 +- net/netlabel/Makefile | 2 -- net/netlabel/netlabel_addrlist.c | 2 +- net/netlabel/netlabel_addrlist.h | 2 +- net/netlabel/netlabel_cipso_v4.c | 2 +- net/netlabel/netlabel_cipso_v4.h | 2 +- net/netlabel/netlabel_domainhash.c | 2 +- net/netlabel/netlabel_domainhash.h | 2 +- net/netlabel/netlabel_kapi.c | 2 +- net/netlabel/netlabel_mgmt.c | 2 +- net/netlabel/netlabel_mgmt.h | 2 +- net/netlabel/netlabel_unlabeled.c | 2 +- net/netlabel/netlabel_unlabeled.h | 2 +- net/netlabel/netlabel_user.c | 2 +- net/netlabel/netlabel_user.h | 2 +- security/selinux/hooks.c | 2 +- security/selinux/include/netif.h | 2 +- security/selinux/include/netlabel.h | 2 +- security/selinux/include/netnode.h | 2 +- security/selinux/include/netport.h | 2 +- security/selinux/netif.c | 2 +- security/selinux/netlabel.c | 2 +- security/selinux/netnode.c | 2 +- security/selinux/netport.c | 2 +- security/selinux/selinuxfs.c | 2 +- security/selinux/ss/ebitmap.c | 2 +- security/selinux/ss/mls.c | 2 +- security/selinux/ss/mls.h | 2 +- security/selinux/ss/policydb.c | 2 +- security/selinux/ss/services.c | 2 +- security/smack/smack_lsm.c | 2 +- 32 files changed, 31 insertions(+), 33 deletions(-) diff --git a/include/net/cipso_ipv4.h b/include/net/cipso_ipv4.h index 3b938743514..9808877c2ab 100644 --- a/include/net/cipso_ipv4.h +++ b/include/net/cipso_ipv4.h @@ -8,7 +8,7 @@ * have chosen to adopt the protocol and over the years it has become a * de-facto standard for labeled networking. * - * Author: Paul Moore + * Author: Paul Moore * */ diff --git a/include/net/netlabel.h b/include/net/netlabel.h index f21a16ee370..f67440970d7 100644 --- a/include/net/netlabel.h +++ b/include/net/netlabel.h @@ -4,7 +4,7 @@ * The NetLabel system manages static and dynamic label mappings for network * protocols such as CIPSO and RIPSO. * - * Author: Paul Moore + * Author: Paul Moore * */ diff --git a/net/netlabel/Makefile b/net/netlabel/Makefile index ea750e9df65..d2732fc952e 100644 --- a/net/netlabel/Makefile +++ b/net/netlabel/Makefile @@ -1,8 +1,6 @@ # # Makefile for the NetLabel subsystem. # -# Feb 9, 2006, Paul Moore -# # base objects obj-y := netlabel_user.o netlabel_kapi.o diff --git a/net/netlabel/netlabel_addrlist.c b/net/netlabel/netlabel_addrlist.c index c0519139679..96b749dacc3 100644 --- a/net/netlabel/netlabel_addrlist.c +++ b/net/netlabel/netlabel_addrlist.c @@ -6,7 +6,7 @@ * system manages static and dynamic label mappings for network protocols such * as CIPSO and RIPSO. * - * Author: Paul Moore + * Author: Paul Moore * */ diff --git a/net/netlabel/netlabel_addrlist.h b/net/netlabel/netlabel_addrlist.h index 2b9644e19de..fdbc1d2c735 100644 --- a/net/netlabel/netlabel_addrlist.h +++ b/net/netlabel/netlabel_addrlist.h @@ -6,7 +6,7 @@ * system manages static and dynamic label mappings for network protocols such * as CIPSO and RIPSO. * - * Author: Paul Moore + * Author: Paul Moore * */ diff --git a/net/netlabel/netlabel_cipso_v4.c b/net/netlabel/netlabel_cipso_v4.c index dd53a36d89a..6bf878335d9 100644 --- a/net/netlabel/netlabel_cipso_v4.c +++ b/net/netlabel/netlabel_cipso_v4.c @@ -5,7 +5,7 @@ * NetLabel system manages static and dynamic label mappings for network * protocols such as CIPSO and RIPSO. * - * Author: Paul Moore + * Author: Paul Moore * */ diff --git a/net/netlabel/netlabel_cipso_v4.h b/net/netlabel/netlabel_cipso_v4.h index af7f3355103..d24d774bfd6 100644 --- a/net/netlabel/netlabel_cipso_v4.h +++ b/net/netlabel/netlabel_cipso_v4.h @@ -5,7 +5,7 @@ * NetLabel system manages static and dynamic label mappings for network * protocols such as CIPSO and RIPSO. * - * Author: Paul Moore + * Author: Paul Moore * */ diff --git a/net/netlabel/netlabel_domainhash.c b/net/netlabel/netlabel_domainhash.c index 2aa975e5452..7d8083cde34 100644 --- a/net/netlabel/netlabel_domainhash.c +++ b/net/netlabel/netlabel_domainhash.c @@ -6,7 +6,7 @@ * system manages static and dynamic label mappings for network protocols such * as CIPSO and RIPSO. * - * Author: Paul Moore + * Author: Paul Moore * */ diff --git a/net/netlabel/netlabel_domainhash.h b/net/netlabel/netlabel_domainhash.h index 0261dda3f2d..bfcc0f7024c 100644 --- a/net/netlabel/netlabel_domainhash.h +++ b/net/netlabel/netlabel_domainhash.h @@ -6,7 +6,7 @@ * system manages static and dynamic label mappings for network protocols such * as CIPSO and RIPSO. * - * Author: Paul Moore + * Author: Paul Moore * */ diff --git a/net/netlabel/netlabel_kapi.c b/net/netlabel/netlabel_kapi.c index b528dd928d3..58107d06084 100644 --- a/net/netlabel/netlabel_kapi.c +++ b/net/netlabel/netlabel_kapi.c @@ -5,7 +5,7 @@ * system manages static and dynamic label mappings for network protocols such * as CIPSO and RIPSO. * - * Author: Paul Moore + * Author: Paul Moore * */ diff --git a/net/netlabel/netlabel_mgmt.c b/net/netlabel/netlabel_mgmt.c index dff8a080924..bfa55586977 100644 --- a/net/netlabel/netlabel_mgmt.c +++ b/net/netlabel/netlabel_mgmt.c @@ -5,7 +5,7 @@ * NetLabel system manages static and dynamic label mappings for network * protocols such as CIPSO and RIPSO. * - * Author: Paul Moore + * Author: Paul Moore * */ diff --git a/net/netlabel/netlabel_mgmt.h b/net/netlabel/netlabel_mgmt.h index 8db37f4c10f..5a9f31ce579 100644 --- a/net/netlabel/netlabel_mgmt.h +++ b/net/netlabel/netlabel_mgmt.h @@ -5,7 +5,7 @@ * NetLabel system manages static and dynamic label mappings for network * protocols such as CIPSO and RIPSO. * - * Author: Paul Moore + * Author: Paul Moore * */ diff --git a/net/netlabel/netlabel_unlabeled.c b/net/netlabel/netlabel_unlabeled.c index f1ecf848e3a..e6e823656f9 100644 --- a/net/netlabel/netlabel_unlabeled.c +++ b/net/netlabel/netlabel_unlabeled.c @@ -5,7 +5,7 @@ * NetLabel system. The NetLabel system manages static and dynamic label * mappings for network protocols such as CIPSO and RIPSO. * - * Author: Paul Moore + * Author: Paul Moore * */ diff --git a/net/netlabel/netlabel_unlabeled.h b/net/netlabel/netlabel_unlabeled.h index 0bc8dc3f9e3..700af49022a 100644 --- a/net/netlabel/netlabel_unlabeled.h +++ b/net/netlabel/netlabel_unlabeled.h @@ -5,7 +5,7 @@ * NetLabel system. The NetLabel system manages static and dynamic label * mappings for network protocols such as CIPSO and RIPSO. * - * Author: Paul Moore + * Author: Paul Moore * */ diff --git a/net/netlabel/netlabel_user.c b/net/netlabel/netlabel_user.c index a3fd75ac3fa..9fae63f1029 100644 --- a/net/netlabel/netlabel_user.c +++ b/net/netlabel/netlabel_user.c @@ -5,7 +5,7 @@ * NetLabel system manages static and dynamic label mappings for network * protocols such as CIPSO and RIPSO. * - * Author: Paul Moore + * Author: Paul Moore * */ diff --git a/net/netlabel/netlabel_user.h b/net/netlabel/netlabel_user.h index f4fc4c9ad56..81969785e27 100644 --- a/net/netlabel/netlabel_user.h +++ b/net/netlabel/netlabel_user.h @@ -5,7 +5,7 @@ * NetLabel system manages static and dynamic label mappings for network * protocols such as CIPSO and RIPSO. * - * Author: Paul Moore + * Author: Paul Moore * */ diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index a38316b2e3f..266a2292451 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -14,7 +14,7 @@ * Copyright (C) 2004-2005 Trusted Computer Solutions, Inc. * * Copyright (C) 2006, 2007, 2009 Hewlett-Packard Development Company, L.P. - * Paul Moore + * Paul Moore * Copyright (C) 2007 Hitachi Software Engineering Co., Ltd. * Yuichi Nakamura * diff --git a/security/selinux/include/netif.h b/security/selinux/include/netif.h index ce23edd128b..43d507242b4 100644 --- a/security/selinux/include/netif.h +++ b/security/selinux/include/netif.h @@ -8,7 +8,7 @@ * * Copyright (C) 2003 Red Hat, Inc., James Morris * Copyright (C) 2007 Hewlett-Packard Development Company, L.P. - * Paul Moore, + * Paul Moore * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2, diff --git a/security/selinux/include/netlabel.h b/security/selinux/include/netlabel.h index cf2f628e6e2..8c59b8f150e 100644 --- a/security/selinux/include/netlabel.h +++ b/security/selinux/include/netlabel.h @@ -1,7 +1,7 @@ /* * SELinux interface to the NetLabel subsystem * - * Author : Paul Moore + * Author: Paul Moore * */ diff --git a/security/selinux/include/netnode.h b/security/selinux/include/netnode.h index 1b94450d11d..df7a5ed6c69 100644 --- a/security/selinux/include/netnode.h +++ b/security/selinux/include/netnode.h @@ -6,7 +6,7 @@ * needed to reduce the lookup overhead since most of these queries happen on * a per-packet basis. * - * Author: Paul Moore + * Author: Paul Moore * */ diff --git a/security/selinux/include/netport.h b/security/selinux/include/netport.h index 8991752eaf9..4d965b83d73 100644 --- a/security/selinux/include/netport.h +++ b/security/selinux/include/netport.h @@ -5,7 +5,7 @@ * mapping is maintained as part of the normal policy but a fast cache is * needed to reduce the lookup overhead. * - * Author: Paul Moore + * Author: Paul Moore * */ diff --git a/security/selinux/netif.c b/security/selinux/netif.c index 58cc481c93d..326f22cbe40 100644 --- a/security/selinux/netif.c +++ b/security/selinux/netif.c @@ -8,7 +8,7 @@ * * Copyright (C) 2003 Red Hat, Inc., James Morris * Copyright (C) 2007 Hewlett-Packard Development Company, L.P. - * Paul Moore + * Paul Moore * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2, diff --git a/security/selinux/netlabel.c b/security/selinux/netlabel.c index c3bf3ed07b0..da4b8b23328 100644 --- a/security/selinux/netlabel.c +++ b/security/selinux/netlabel.c @@ -4,7 +4,7 @@ * This file provides the necessary glue to tie NetLabel into the SELinux * subsystem. * - * Author: Paul Moore + * Author: Paul Moore * */ diff --git a/security/selinux/netnode.c b/security/selinux/netnode.c index 8b691a86318..3bf46abaa68 100644 --- a/security/selinux/netnode.c +++ b/security/selinux/netnode.c @@ -6,7 +6,7 @@ * needed to reduce the lookup overhead since most of these queries happen on * a per-packet basis. * - * Author: Paul Moore + * Author: Paul Moore * * This code is heavily based on the "netif" concept originally developed by * James Morris diff --git a/security/selinux/netport.c b/security/selinux/netport.c index ae76e298de7..0b62bd11246 100644 --- a/security/selinux/netport.c +++ b/security/selinux/netport.c @@ -5,7 +5,7 @@ * mapping is maintained as part of the normal policy but a fast cache is * needed to reduce the lookup overhead. * - * Author: Paul Moore + * Author: Paul Moore * * This code is heavily based on the "netif" concept originally developed by * James Morris diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c index de7900ef53d..55d92cbb177 100644 --- a/security/selinux/selinuxfs.c +++ b/security/selinux/selinuxfs.c @@ -2,7 +2,7 @@ * * Added conditional policy language extensions * - * Updated: Hewlett-Packard + * Updated: Hewlett-Packard * * Added support for the policy capability bitmap * diff --git a/security/selinux/ss/ebitmap.c b/security/selinux/ss/ebitmap.c index d42951fcbe8..30f119b1d1e 100644 --- a/security/selinux/ss/ebitmap.c +++ b/security/selinux/ss/ebitmap.c @@ -4,7 +4,7 @@ * Author : Stephen Smalley, */ /* - * Updated: Hewlett-Packard + * Updated: Hewlett-Packard * * Added support to import/export the NetLabel category bitmap * diff --git a/security/selinux/ss/mls.c b/security/selinux/ss/mls.c index e96174216bc..fbf9c5816c7 100644 --- a/security/selinux/ss/mls.c +++ b/security/selinux/ss/mls.c @@ -11,7 +11,7 @@ * Copyright (C) 2004-2006 Trusted Computer Solutions, Inc. */ /* - * Updated: Hewlett-Packard + * Updated: Hewlett-Packard * * Added support to import/export the MLS label from NetLabel * diff --git a/security/selinux/ss/mls.h b/security/selinux/ss/mls.h index 037bf9d82d4..e4369e3e636 100644 --- a/security/selinux/ss/mls.h +++ b/security/selinux/ss/mls.h @@ -11,7 +11,7 @@ * Copyright (C) 2004-2006 Trusted Computer Solutions, Inc. */ /* - * Updated: Hewlett-Packard + * Updated: Hewlett-Packard * * Added support to import/export the MLS label from NetLabel * diff --git a/security/selinux/ss/policydb.c b/security/selinux/ss/policydb.c index d246aca3f4f..2381d0ded22 100644 --- a/security/selinux/ss/policydb.c +++ b/security/selinux/ss/policydb.c @@ -13,7 +13,7 @@ * * Added conditional policy language extensions * - * Updated: Hewlett-Packard + * Updated: Hewlett-Packard * * Added support for the policy capability bitmap * diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c index 973e00e34fa..f6917bc0aa0 100644 --- a/security/selinux/ss/services.c +++ b/security/selinux/ss/services.c @@ -13,7 +13,7 @@ * * Added conditional policy language extensions * - * Updated: Hewlett-Packard + * Updated: Hewlett-Packard * * Added support for NetLabel * Added support for the policy capability bitmap diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c index f375eb2e195..b9c5e149903 100644 --- a/security/smack/smack_lsm.c +++ b/security/smack/smack_lsm.c @@ -9,7 +9,7 @@ * * Copyright (C) 2007 Casey Schaufler * Copyright (C) 2009 Hewlett-Packard Development Company, L.P. - * Paul Moore + * Paul Moore * Copyright (C) 2010 Nokia Corporation * * This program is free software; you can redistribute it and/or modify -- cgit v1.2.3 From 8fb4e1399137dbbf7f1071bc723b5eff8ad46d1a Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 1 Aug 2011 17:59:44 -0700 Subject: Documentation/bonding.txt: Update to 3.x version numbers Signed-off-by: Jesper Juhl Signed-off-by: David S. Miller --- Documentation/networking/bonding.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index 675612ff41a..5dd960d7517 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -599,7 +599,7 @@ num_unsol_na affect only the active-backup mode. These options were added for bonding versions 3.3.0 and 3.4.0 respectively. - From Linux 2.6.40 and bonding version 3.7.1, these notifications + From Linux 3.0 and bonding version 3.7.1, these notifications are generated by the ipv4 and ipv6 code and the numbers of repetitions cannot be set independently. -- cgit v1.2.3 From 22019b17821ab3543090827491e465c5816cbcd6 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 29 Jul 2011 18:37:31 +0000 Subject: net: add kerneldoc to skb_copy_bits() Since skb_copy_bits() is called from assembly, add a fat comment to make clear we should think twice before changing its prototype. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/skbuff.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 2beda824636..27002dffe7e 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -1369,8 +1369,21 @@ pull_pages: } EXPORT_SYMBOL(__pskb_pull_tail); -/* Copy some data bits from skb to kernel buffer. */ - +/** + * skb_copy_bits - copy bits from skb to kernel buffer + * @skb: source skb + * @offset: offset in source + * @to: destination buffer + * @len: number of bytes to copy + * + * Copy the specified number of bytes from the source skb to the + * destination buffer. + * + * CAUTION ! : + * If its prototype is ever changed, + * check arch/{*}/net/{*}.S files, + * since it is called from BPF assembly code. + */ int skb_copy_bits(const struct sk_buff *skb, int offset, void *to, int len) { int start = skb_headlen(skb); -- cgit v1.2.3 From 87b7ba3d24a25cf18aece447de27d7804fa9668c Mon Sep 17 00:00:00 2001 From: Vladislav Zolotarov Date: Tue, 2 Aug 2011 01:35:43 -0700 Subject: bnx2x: Prevent restarting Tx during bnx2x_nic_unload Tx queues were stopped before bp->state was changed to a value different from BNX2X_STATE_OPEN, which allowed the bnx2x_tx_int() called from the NAPI context to re-enable it. This then allowed the netdev->ndo_start_xmit() to be called in the middle of the function reset and rings freeing. This patch changes bp->state to a value different from BNX2X_STATE_OPEN BEFORE disabling the Tx queues in order to restore the broken protection against the above race in the bnx2x_tx_int(). Signed-off-by: Vladislav Zolotarov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_cmn.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/bnx2x/bnx2x_cmn.c b/drivers/net/bnx2x/bnx2x_cmn.c index 5b0dba6d4ef..d724a18b528 100644 --- a/drivers/net/bnx2x/bnx2x_cmn.c +++ b/drivers/net/bnx2x/bnx2x_cmn.c @@ -1989,14 +1989,20 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) return -EINVAL; } + /* + * It's important to set the bp->state to the value different from + * BNX2X_STATE_OPEN and only then stop the Tx. Otherwise bnx2x_tx_int() + * may restart the Tx from the NAPI context (see bnx2x_tx_int()). + */ + bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT; + smp_mb(); + /* Stop Tx */ bnx2x_tx_disable(bp); #ifdef BCM_CNIC bnx2x_cnic_notify(bp, CNIC_CTL_STOP_CMD); #endif - bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT; - smp_mb(); bp->rx_mode = BNX2X_RX_MODE_NONE; -- cgit v1.2.3 From cc1a93e68f6c0d736b771f0746e8e4186f483fdc Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 1 Aug 2011 12:46:57 -0700 Subject: iwlagn: sysfs couldn't find the priv pointer This bug has been introduced by: d593411084a56124aa9d80aafa15db8463b2d8f7 Author: Emmanuel Grumbach Date: Mon Jul 11 10:48:51 2011 +0300 iwlagn: simplify the bus architecture Revert part of the buggy patch: dev_get_drvdata will now return iwl_priv as it did before the patch. Signed-off-by: Emmanuel Grumbach Tested-by: Daniel Halperin Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-pci.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-pci.c b/drivers/net/wireless/iwlwifi/iwl-pci.c index fb7e436b40c..69d4ec467dc 100644 --- a/drivers/net/wireless/iwlwifi/iwl-pci.c +++ b/drivers/net/wireless/iwlwifi/iwl-pci.c @@ -134,6 +134,7 @@ static void iwl_pci_apm_config(struct iwl_bus *bus) static void iwl_pci_set_drv_data(struct iwl_bus *bus, void *drv_data) { bus->drv_data = drv_data; + pci_set_drvdata(IWL_BUS_GET_PCI_DEV(bus), drv_data); } static void iwl_pci_get_hw_id(struct iwl_bus *bus, char buf[], @@ -454,8 +455,6 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pci_write_config_word(pdev, PCI_COMMAND, pci_cmd); } - pci_set_drvdata(pdev, bus); - bus->dev = &pdev->dev; bus->irq = pdev->irq; bus->ops = &pci_ops; @@ -494,11 +493,12 @@ static void iwl_pci_down(struct iwl_bus *bus) static void __devexit iwl_pci_remove(struct pci_dev *pdev) { - struct iwl_bus *bus = pci_get_drvdata(pdev); + struct iwl_priv *priv = pci_get_drvdata(pdev); + void *bus_specific = priv->bus->bus_specific; - iwl_remove(bus->drv_data); + iwl_remove(priv); - iwl_pci_down(bus); + iwl_pci_down(bus_specific); } #ifdef CONFIG_PM @@ -506,20 +506,20 @@ static void __devexit iwl_pci_remove(struct pci_dev *pdev) static int iwl_pci_suspend(struct device *device) { struct pci_dev *pdev = to_pci_dev(device); - struct iwl_bus *bus = pci_get_drvdata(pdev); + struct iwl_priv *priv = pci_get_drvdata(pdev); /* Before you put code here, think about WoWLAN. You cannot check here * whether WoWLAN is enabled or not, and your code will run even if * WoWLAN is enabled - don't kill the NIC, someone may need it in Sx. */ - return iwl_suspend(bus->drv_data); + return iwl_suspend(priv); } static int iwl_pci_resume(struct device *device) { struct pci_dev *pdev = to_pci_dev(device); - struct iwl_bus *bus = pci_get_drvdata(pdev); + struct iwl_priv *priv = pci_get_drvdata(pdev); /* Before you put code here, think about WoWLAN. You cannot check here * whether WoWLAN is enabled or not, and your code will run even if @@ -532,7 +532,7 @@ static int iwl_pci_resume(struct device *device) */ pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00); - return iwl_resume(bus->drv_data); + return iwl_resume(priv); } static SIMPLE_DEV_PM_OPS(iwl_dev_pm_ops, iwl_pci_suspend, iwl_pci_resume); -- cgit v1.2.3 From 449f94eadc91d69fa044fa92ef45c02e86559e13 Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Tue, 2 Aug 2011 11:43:14 +0200 Subject: rt2x00: Fix compilation without CONFIG_RT2X00_LIB_CRYPTO This was introduced by commit 77b5621bac4a56b83b9081f48d4e7d1accdde400 (rt2x00: Don't use queue entry as parameter when creating TX descriptor.) Signed-off-by: Helmut Schaa Acked-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Reported-by: Randy Dunlap Acked-by: Randy Dunlap Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00lib.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index 15cdc7e57fc..4cdf247a870 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -355,7 +355,8 @@ static inline enum cipher rt2x00crypto_key_to_cipher(struct ieee80211_key_conf * return CIPHER_NONE; } -static inline void rt2x00crypto_create_tx_descriptor(struct queue_entry *entry, +static inline void rt2x00crypto_create_tx_descriptor(struct rt2x00_dev *rt2x00dev, + struct sk_buff *skb, struct txentry_desc *txdesc) { } -- cgit v1.2.3 From 00898a47269ae5e6dda04defad00234b96692d95 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 2 Aug 2011 13:29:02 +0200 Subject: rt2x00: fix usage of NULL queue We may call rt2x00queue_pause_queue(queue) with queue == NULL. Bug was introduced by commit 62fe778412b36791b7897cfa139342906fbbf07b "rt2x00: Fix stuck queue in tx failure case" . Cc: stable@kernel.org # 3.0+ Signed-off-by: Stanislaw Gruszka Acked-by: Ivo van Doorn Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00mac.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 8efab398352..4ccf2380597 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -113,7 +113,7 @@ void rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) * due to possible race conditions in mac80211. */ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) - goto exit_fail; + goto exit_free_skb; /* * Use the ATIM queue if appropriate and present. @@ -127,7 +127,7 @@ void rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) ERROR(rt2x00dev, "Attempt to send packet over invalid queue %d.\n" "Please file bug report to %s.\n", qid, DRV_PROJECT); - goto exit_fail; + goto exit_free_skb; } /* @@ -159,6 +159,7 @@ void rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) exit_fail: rt2x00queue_pause_queue(queue); + exit_free_skb: dev_kfree_skb_any(skb); } EXPORT_SYMBOL_GPL(rt2x00mac_tx); -- cgit v1.2.3 From f35291082294ca6737953bbe4e9491ede04ab822 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Tue, 2 Aug 2011 09:08:37 -0700 Subject: iwlagn: 5000 do not support idle mode 5000 series has issue supporting power save idle mode: commit 9dc2153315650eae220898668b6aa56a25c130be iwlwifi: always support idle mode for agn devices For agn devices, always support idle mode which help power consumption in idle unassociated state. the above changes cause 5000 become not stable when power management is "on" http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2312 Cc: stable@kernel.org #2.6.39, #3.0.0 Reported-by: Devin J Pohly Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-5000.c | 1 + drivers/net/wireless/iwlwifi/iwl-core.h | 2 ++ drivers/net/wireless/iwlwifi/iwl-power.c | 3 ++- 3 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 3eeb12ebe6e..c95cefd529d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -365,6 +365,7 @@ static struct iwl_base_params iwl5000_base_params = { .chain_noise_scale = 1000, .wd_timeout = IWL_LONG_WD_TIMEOUT, .max_event_log_size = 512, + .no_idle_support = true, }; static struct iwl_ht_params iwl5000_ht_params = { .ht_greenfield_support = true, diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 3e6bb734dcb..02817a43855 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -135,6 +135,7 @@ struct iwl_mod_params { * @temperature_kelvin: temperature report by uCode in kelvin * @max_event_log_size: size of event log buffer size for ucode event logging * @shadow_reg_enable: HW shadhow register bit + * @no_idle_support: do not support idle mode */ struct iwl_base_params { int eeprom_size; @@ -156,6 +157,7 @@ struct iwl_base_params { bool temperature_kelvin; u32 max_event_log_size; const bool shadow_reg_enable; + const bool no_idle_support; }; /* * @advanced_bt_coexist: support advanced bt coexist diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c index 3ec619c6881..cd64df05f9e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-power.c +++ b/drivers/net/wireless/iwlwifi/iwl-power.c @@ -349,7 +349,8 @@ static void iwl_power_build_cmd(struct iwl_priv *priv, if (priv->wowlan) iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, dtimper); - else if (priv->hw->conf.flags & IEEE80211_CONF_IDLE) + else if (!priv->cfg->base_params->no_idle_support && + priv->hw->conf.flags & IEEE80211_CONF_IDLE) iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, 20); else if (iwl_tt_is_low_power_state(priv)) { /* in thermal throttling low power state */ -- cgit v1.2.3 From c28aa38567101bad4e020f4392df41d0bf6c165c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Tue, 2 Aug 2011 03:53:43 +0000 Subject: r8169 : MAC address change fix for the 8168e-vl. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=39252 Hayes suggested that the usual MAC{0, 4} register writes be completed with writes to extended GigaMAC registers : - 0xe0 .. 0xe5 - 0xf2 .. 0xf7 Registers 0xf0 and 0xf1 should be set to 0. Signed-off-by: Francois Romieu Cc: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/r8169.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index c77286edba4..02339b3352e 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -1092,6 +1092,21 @@ rtl_w1w0_eri(void __iomem *ioaddr, int addr, u32 mask, u32 p, u32 m, int type) rtl_eri_write(ioaddr, addr, mask, (val & ~m) | p, type); } +struct exgmac_reg { + u16 addr; + u16 mask; + u32 val; +}; + +static void rtl_write_exgmac_batch(void __iomem *ioaddr, + const struct exgmac_reg *r, int len) +{ + while (len-- > 0) { + rtl_eri_write(ioaddr, r->addr, r->mask, r->val, ERIAR_EXGMAC); + r++; + } +} + static u8 rtl8168d_efuse_read(void __iomem *ioaddr, int reg_addr) { u8 value = 0xff; @@ -3117,6 +3132,18 @@ static void rtl_rar_set(struct rtl8169_private *tp, u8 *addr) RTL_W32(MAC0, low); RTL_R32(MAC0); + if (tp->mac_version == RTL_GIGA_MAC_VER_34) { + const struct exgmac_reg e[] = { + { .addr = 0xe0, ERIAR_MASK_1111, .val = low }, + { .addr = 0xe4, ERIAR_MASK_1111, .val = high }, + { .addr = 0xf0, ERIAR_MASK_1111, .val = low << 16 }, + { .addr = 0xf4, ERIAR_MASK_1111, .val = high << 16 | + low >> 16 }, + }; + + rtl_write_exgmac_batch(ioaddr, e, ARRAY_SIZE(e)); + } + RTL_W8(Cfg9346, Cfg9346_Lock); spin_unlock_irq(&tp->lock); -- cgit v1.2.3 From 9d5b36be64b42058e7fd12b71266bbf2bb7600fc Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Tue, 2 Aug 2011 22:59:10 +0000 Subject: bnx2x: Fix missing pause on for 578xx When link speed is 1G and below, pause weren't sent due to missing pause setting in the UMAC. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 6 ++++++ drivers/net/bnx2x/bnx2x_reg.h | 2 ++ 2 files changed, 8 insertions(+) diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index bcd8f003862..aa9958e3744 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -1546,6 +1546,12 @@ static void bnx2x_umac_enable(struct link_params *params, vars->line_speed); break; } + if (!(vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)) + val |= UMAC_COMMAND_CONFIG_REG_IGNORE_TX_PAUSE; + + if (!(vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)) + val |= UMAC_COMMAND_CONFIG_REG_PAUSE_IGNORE; + REG_WR(bp, umac_base + UMAC_REG_COMMAND_CONFIG, val); udelay(50); diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h index 02461fef875..d84642aca45 100644 --- a/drivers/net/bnx2x/bnx2x_reg.h +++ b/drivers/net/bnx2x/bnx2x_reg.h @@ -4771,9 +4771,11 @@ The fields are: [4:0] - tail pointer; 10:5] - Link List size; 15:11] - header pointer. */ #define UCM_REG_XX_TABLE 0xe0300 +#define UMAC_COMMAND_CONFIG_REG_IGNORE_TX_PAUSE (0x1<<28) #define UMAC_COMMAND_CONFIG_REG_LOOP_ENA (0x1<<15) #define UMAC_COMMAND_CONFIG_REG_NO_LGTH_CHECK (0x1<<24) #define UMAC_COMMAND_CONFIG_REG_PAD_EN (0x1<<5) +#define UMAC_COMMAND_CONFIG_REG_PAUSE_IGNORE (0x1<<8) #define UMAC_COMMAND_CONFIG_REG_PROMIS_EN (0x1<<4) #define UMAC_COMMAND_CONFIG_REG_RX_ENA (0x1<<1) #define UMAC_COMMAND_CONFIG_REG_SW_RESET (0x1<<13) -- cgit v1.2.3 From b507766205f85d6d69892287e346a7c264a216b4 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Tue, 2 Aug 2011 22:59:18 +0000 Subject: bnx2x: Fix chip hanging due to TX pipe stall. Fix a problem in which the 578xx chip hangs after running traffic, and then pulling the network cable. This occurs since TX pipe is stalled due to missing XON indication towards the NIG. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index aa9958e3744..0a7091d3de2 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -1667,10 +1667,20 @@ static void bnx2x_xmac_disable(struct link_params *params) { u8 port = params->port; struct bnx2x *bp = params->bp; - u32 xmac_base = (port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; + u32 pfc_ctrl, xmac_base = (port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; if (REG_RD(bp, MISC_REG_RESET_REG_2) & MISC_REGISTERS_RESET_REG_2_XMAC) { + /* + * Send an indication to change the state in the NIG back to XON + * Clearing this bit enables the next set of this bit to get + * rising edge + */ + pfc_ctrl = REG_RD(bp, xmac_base + XMAC_REG_PFC_CTRL_HI); + REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL_HI, + (pfc_ctrl & ~(1<<1))); + REG_WR(bp, xmac_base + XMAC_REG_PFC_CTRL_HI, + (pfc_ctrl | (1<<1))); DP(NETIF_MSG_LINK, "Disable XMAC on port %x\n", port); REG_WR(bp, xmac_base + XMAC_REG_CTRL, 0); usleep_range(1000, 1000); -- cgit v1.2.3 From de6f3377d2da3b384ca3d716ffb8687ad175788a Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Tue, 2 Aug 2011 22:59:25 +0000 Subject: bnx2x: Fix remote fault handling Fix couple of issues of remote fault detection and handling: Link may go down due to remote fault indications during link establishment. Possible link down after primary function migration. Remote fault was not detected on 578xx. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_hsi.h | 2 + drivers/net/bnx2x/bnx2x_link.c | 110 ++++++++++++++++++++++++----------------- drivers/net/bnx2x/bnx2x_link.h | 2 +- 3 files changed, 69 insertions(+), 45 deletions(-) diff --git a/drivers/net/bnx2x/bnx2x_hsi.h b/drivers/net/bnx2x/bnx2x_hsi.h index 06727f32e50..dc24de40e33 100644 --- a/drivers/net/bnx2x/bnx2x_hsi.h +++ b/drivers/net/bnx2x/bnx2x_hsi.h @@ -1204,6 +1204,8 @@ struct drv_port_mb { #define LINK_STATUS_PFC_ENABLED 0x20000000 + #define LINK_STATUS_PHYSICAL_LINK_FLAG 0x40000000 + u32 port_stx; u32 stat_nig_timer; diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 0a7091d3de2..8e68e1582ec 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -1745,6 +1745,10 @@ static int bnx2x_emac_enable(struct link_params *params, DP(NETIF_MSG_LINK, "enabling EMAC\n"); + /* Disable BMAC */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port)); + /* enable emac and not bmac */ REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 1); @@ -2599,12 +2603,6 @@ static int bnx2x_bmac1_enable(struct link_params *params, REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LLFC_MSG_FLDS, wb_data, 2); - if (vars->phy_flags & PHY_TX_ERROR_CHECK_FLAG) { - REG_RD_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LSS_STATUS, - wb_data, 2); - if (wb_data[0] > 0) - return -ESRCH; - } return 0; } @@ -2670,16 +2668,6 @@ static int bnx2x_bmac2_enable(struct link_params *params, udelay(30); bnx2x_update_pfc_bmac2(params, vars, is_lb); - if (vars->phy_flags & PHY_TX_ERROR_CHECK_FLAG) { - REG_RD_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_RX_LSS_STAT, - wb_data, 2); - if (wb_data[0] > 0) { - DP(NETIF_MSG_LINK, "Got bad LSS status 0x%x\n", - wb_data[0]); - return -ESRCH; - } - } - return 0; } @@ -4369,6 +4357,9 @@ void bnx2x_link_status_update(struct link_params *params, vars->link_up = (vars->link_status & LINK_STATUS_LINK_UP); vars->phy_flags = PHY_XGXS_FLAG; + if (vars->link_status & LINK_STATUS_PHYSICAL_LINK_FLAG) + vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG; + if (vars->link_up) { DP(NETIF_MSG_LINK, "phy link up\n"); @@ -4460,6 +4451,8 @@ void bnx2x_link_status_update(struct link_params *params, /* indicate no mac active */ vars->mac_type = MAC_TYPE_NONE; + if (vars->link_status & LINK_STATUS_PHYSICAL_LINK_FLAG) + vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG; } /* Sync media type */ @@ -6176,6 +6169,7 @@ static int bnx2x_update_link_down(struct link_params *params, /* update shared memory */ vars->link_status &= ~(LINK_STATUS_SPEED_AND_DUPLEX_MASK | LINK_STATUS_LINK_UP | + LINK_STATUS_PHYSICAL_LINK_FLAG | LINK_STATUS_AUTO_NEGOTIATE_COMPLETE | LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK | LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK | @@ -6213,7 +6207,8 @@ static int bnx2x_update_link_up(struct link_params *params, u8 port = params->port; int rc = 0; - vars->link_status |= LINK_STATUS_LINK_UP; + vars->link_status |= (LINK_STATUS_LINK_UP | + LINK_STATUS_PHYSICAL_LINK_FLAG); vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG; if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) @@ -8132,7 +8127,6 @@ void bnx2x_handle_module_detect_int(struct link_params *params) offsetof(struct shmem_region, dev_info. port_feature_config[params->port]. config)); - bnx2x_set_gpio_int(bp, gpio_num, MISC_REGISTERS_GPIO_INT_OUTPUT_SET, gpio_port); @@ -8141,8 +8135,9 @@ void bnx2x_handle_module_detect_int(struct link_params *params) * Disable transmit for this module */ phy->media_type = ETH_PHY_NOT_PRESENT; - if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == - PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER) + if (((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == + PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER) || + CHIP_IS_E3(bp)) bnx2x_sfp_set_transmitter(params, phy, 0); } } @@ -8244,9 +8239,6 @@ static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy, u16 cnt, val, tmp1; struct bnx2x *bp = params->bp; - /* SPF+ PHY: Set flag to check for Tx error */ - vars->phy_flags = PHY_TX_ERROR_CHECK_FLAG; - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); /* HW reset */ @@ -8430,9 +8422,6 @@ static int bnx2x_8726_config_init(struct bnx2x_phy *phy, struct bnx2x *bp = params->bp; DP(NETIF_MSG_LINK, "Initializing BCM8726\n"); - /* SPF+ PHY: Set flag to check for Tx error */ - vars->phy_flags = PHY_TX_ERROR_CHECK_FLAG; - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15); bnx2x_wait_reset_complete(bp, phy, params); @@ -8601,9 +8590,6 @@ static int bnx2x_8727_config_init(struct bnx2x_phy *phy, struct bnx2x *bp = params->bp; /* Enable PMD link, MOD_ABS_FLT, and 1G link alarm */ - /* SPF+ PHY: Set flag to check for Tx error */ - vars->phy_flags = PHY_TX_ERROR_CHECK_FLAG; - bnx2x_wait_reset_complete(bp, phy, params); rx_alarm_ctrl_val = (1<<2) | (1<<5) ; /* Should be 0x6 to enable XS on Tx side. */ @@ -10619,7 +10605,8 @@ static struct bnx2x_phy phy_warpcore = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT, .addr = 0xff, .def_md_devad = 0, - .flags = FLAGS_HW_LOCK_REQUIRED, + .flags = (FLAGS_HW_LOCK_REQUIRED | + FLAGS_TX_ERROR_CHECK), .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, @@ -10745,7 +10732,8 @@ static struct bnx2x_phy phy_8706 = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706, .addr = 0xff, .def_md_devad = 0, - .flags = FLAGS_INIT_XGXS_FIRST, + .flags = (FLAGS_INIT_XGXS_FIRST | + FLAGS_TX_ERROR_CHECK), .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, @@ -10776,7 +10764,8 @@ static struct bnx2x_phy phy_8726 = { .addr = 0xff, .def_md_devad = 0, .flags = (FLAGS_HW_LOCK_REQUIRED | - FLAGS_INIT_XGXS_FIRST), + FLAGS_INIT_XGXS_FIRST | + FLAGS_TX_ERROR_CHECK), .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, @@ -10807,7 +10796,8 @@ static struct bnx2x_phy phy_8727 = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, .addr = 0xff, .def_md_devad = 0, - .flags = FLAGS_FAN_FAILURE_DET_REQ, + .flags = (FLAGS_FAN_FAILURE_DET_REQ | + FLAGS_TX_ERROR_CHECK), .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, @@ -12194,10 +12184,6 @@ static void bnx2x_analyze_link_error(struct link_params *params, u8 led_mode; u32 half_open_conn = (vars->phy_flags & PHY_HALF_OPEN_CONN_FLAG) > 0; - /*DP(NETIF_MSG_LINK, "CHECK LINK: %x half_open:%x-> lss:%x\n", - vars->link_up, - half_open_conn, lss_status);*/ - if ((lss_status ^ half_open_conn) == 0) return; @@ -12210,6 +12196,7 @@ static void bnx2x_analyze_link_error(struct link_params *params, * b. Update link_vars->link_up */ if (lss_status) { + DP(NETIF_MSG_LINK, "Remote Fault detected !!!\n"); vars->link_status &= ~LINK_STATUS_LINK_UP; vars->link_up = 0; vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG; @@ -12219,6 +12206,7 @@ static void bnx2x_analyze_link_error(struct link_params *params, */ led_mode = LED_MODE_OFF; } else { + DP(NETIF_MSG_LINK, "Remote Fault cleared\n"); vars->link_status |= LINK_STATUS_LINK_UP; vars->link_up = 1; vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG; @@ -12235,6 +12223,15 @@ static void bnx2x_analyze_link_error(struct link_params *params, bnx2x_notify_link_changed(bp); } +/****************************************************************************** +* Description: +* This function checks for half opened connection change indication. +* When such change occurs, it calls the bnx2x_analyze_link_error +* to check if Remote Fault is set or cleared. Reception of remote fault +* status message in the MAC indicates that the peer's MAC has detected +* a fault, for example, due to break in the TX side of fiber. +* +******************************************************************************/ static void bnx2x_check_half_open_conn(struct link_params *params, struct link_vars *vars) { @@ -12245,9 +12242,28 @@ static void bnx2x_check_half_open_conn(struct link_params *params, if ((vars->phy_flags & PHY_PHYSICAL_LINK_FLAG) == 0) return; - if (!CHIP_IS_E3(bp) && + if (CHIP_IS_E3(bp) && (REG_RD(bp, MISC_REG_RESET_REG_2) & - (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port))) { + (MISC_REGISTERS_RESET_REG_2_XMAC))) { + /* Check E3 XMAC */ + /* + * Note that link speed cannot be queried here, since it may be + * zero while link is down. In case UMAC is active, LSS will + * simply not be set + */ + mac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; + + /* Clear stick bits (Requires rising edge) */ + REG_WR(bp, mac_base + XMAC_REG_CLEAR_RX_LSS_STATUS, 0); + REG_WR(bp, mac_base + XMAC_REG_CLEAR_RX_LSS_STATUS, + XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS | + XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS); + if (REG_RD(bp, mac_base + XMAC_REG_RX_LSS_STATUS)) + lss_status = 1; + + bnx2x_analyze_link_error(params, vars, lss_status); + } else if (REG_RD(bp, MISC_REG_RESET_REG_2) & + (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port)) { /* Check E1X / E2 BMAC */ u32 lss_status_reg; u32 wb_data[2]; @@ -12269,14 +12285,20 @@ static void bnx2x_check_half_open_conn(struct link_params *params, void bnx2x_period_func(struct link_params *params, struct link_vars *vars) { struct bnx2x *bp = params->bp; + u16 phy_idx; if (!params) { - DP(NETIF_MSG_LINK, "Ininitliazed params !\n"); + DP(NETIF_MSG_LINK, "Uninitialized params !\n"); return; } - /* DP(NETIF_MSG_LINK, "Periodic called vars->phy_flags 0x%x speed 0x%x - RESET_REG_2 0x%x\n", vars->phy_flags, vars->line_speed, - REG_RD(bp, MISC_REG_RESET_REG_2)); */ - bnx2x_check_half_open_conn(params, vars); + + for (phy_idx = INT_PHY; phy_idx < MAX_PHYS; phy_idx++) { + if (params->phy[phy_idx].flags & FLAGS_TX_ERROR_CHECK) { + bnx2x_set_aer_mmd(params, ¶ms->phy[phy_idx]); + bnx2x_check_half_open_conn(params, vars); + break; + } + } + if (CHIP_IS_E3(bp)) bnx2x_check_over_curr(params, vars); } diff --git a/drivers/net/bnx2x/bnx2x_link.h b/drivers/net/bnx2x/bnx2x_link.h index 6a7708d5da3..7ee6b51f4fb 100644 --- a/drivers/net/bnx2x/bnx2x_link.h +++ b/drivers/net/bnx2x/bnx2x_link.h @@ -145,6 +145,7 @@ struct bnx2x_phy { #define FLAGS_SFP_NOT_APPROVED (1<<7) #define FLAGS_MDC_MDIO_WA (1<<8) #define FLAGS_DUMMY_READ (1<<9) +#define FLAGS_TX_ERROR_CHECK (1<<12) /* preemphasis values for the rx side */ u16 rx_preemphasis[4]; @@ -276,7 +277,6 @@ struct link_vars { #define PHY_PHYSICAL_LINK_FLAG (1<<2) #define PHY_HALF_OPEN_CONN_FLAG (1<<3) #define PHY_OVER_CURRENT_FLAG (1<<4) -#define PHY_TX_ERROR_CHECK_FLAG (1<<5) u8 mac_type; #define MAC_TYPE_NONE 0 -- cgit v1.2.3 From 157fa283a7cb5bc6a55dd4e0daf6eeef66adf354 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Tue, 2 Aug 2011 22:59:32 +0000 Subject: bnx2x: Fix BCM578xx-B0 MDIO access Fix MDIO access to Warpcore on new chip version of 578xx. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 16 ++++++++++++++-- drivers/net/bnx2x/bnx2x_link.h | 1 + drivers/net/bnx2x/bnx2x_reg.h | 4 +++- 3 files changed, 18 insertions(+), 3 deletions(-) diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 8e68e1582ec..45255bdc513 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -2953,7 +2953,9 @@ static int bnx2x_cl45_read(struct bnx2x *bp, struct bnx2x_phy *phy, u32 val; u16 i; int rc = 0; - + if (phy->flags & FLAGS_MDC_MDIO_WA_B0) + bnx2x_bits_en(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS, + EMAC_MDIO_STATUS_10MB); /* address */ val = ((phy->addr << 21) | (devad << 16) | reg | EMAC_MDIO_COMM_COMMAND_ADDRESS | @@ -3007,6 +3009,9 @@ static int bnx2x_cl45_read(struct bnx2x *bp, struct bnx2x_phy *phy, } } + if (phy->flags & FLAGS_MDC_MDIO_WA_B0) + bnx2x_bits_dis(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS, + EMAC_MDIO_STATUS_10MB); return rc; } @@ -3016,6 +3021,9 @@ static int bnx2x_cl45_write(struct bnx2x *bp, struct bnx2x_phy *phy, u32 tmp; u8 i; int rc = 0; + if (phy->flags & FLAGS_MDC_MDIO_WA_B0) + bnx2x_bits_en(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS, + EMAC_MDIO_STATUS_10MB); /* address */ @@ -3069,7 +3077,9 @@ static int bnx2x_cl45_write(struct bnx2x *bp, struct bnx2x_phy *phy, bnx2x_cl45_read(bp, phy, devad, 0xf, &temp_val); } } - + if (phy->flags & FLAGS_MDC_MDIO_WA_B0) + bnx2x_bits_dis(bp, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_STATUS, + EMAC_MDIO_STATUS_10MB); return rc; } @@ -11118,6 +11128,8 @@ static int bnx2x_populate_int_phy(struct bnx2x *bp, u32 shmem_base, u8 port, */ if (CHIP_REV(bp) == CHIP_REV_Ax) phy->flags |= FLAGS_MDC_MDIO_WA; + else + phy->flags |= FLAGS_MDC_MDIO_WA_B0; } else { switch (switch_cfg) { case SWITCH_CFG_1G: diff --git a/drivers/net/bnx2x/bnx2x_link.h b/drivers/net/bnx2x/bnx2x_link.h index 7ee6b51f4fb..c12db6da213 100644 --- a/drivers/net/bnx2x/bnx2x_link.h +++ b/drivers/net/bnx2x/bnx2x_link.h @@ -145,6 +145,7 @@ struct bnx2x_phy { #define FLAGS_SFP_NOT_APPROVED (1<<7) #define FLAGS_MDC_MDIO_WA (1<<8) #define FLAGS_DUMMY_READ (1<<9) +#define FLAGS_MDC_MDIO_WA_B0 (1<<10) #define FLAGS_TX_ERROR_CHECK (1<<12) /* preemphasis values for the rx side */ diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h index d84642aca45..27b5ecb1183 100644 --- a/drivers/net/bnx2x/bnx2x_reg.h +++ b/drivers/net/bnx2x/bnx2x_reg.h @@ -5624,8 +5624,9 @@ #define EMAC_MDIO_COMM_START_BUSY (1L<<29) #define EMAC_MDIO_MODE_AUTO_POLL (1L<<4) #define EMAC_MDIO_MODE_CLAUSE_45 (1L<<31) -#define EMAC_MDIO_MODE_CLOCK_CNT (0x3fL<<16) +#define EMAC_MDIO_MODE_CLOCK_CNT (0x3ffL<<16) #define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT 16 +#define EMAC_MDIO_STATUS_10MB (1L<<1) #define EMAC_MODE_25G_MODE (1L<<5) #define EMAC_MODE_HALF_DUPLEX (1L<<1) #define EMAC_MODE_PORT_GMII (2L<<2) @@ -5636,6 +5637,7 @@ #define EMAC_REG_EMAC_MAC_MATCH 0x10 #define EMAC_REG_EMAC_MDIO_COMM 0xac #define EMAC_REG_EMAC_MDIO_MODE 0xb4 +#define EMAC_REG_EMAC_MDIO_STATUS 0xb0 #define EMAC_REG_EMAC_MODE 0x0 #define EMAC_REG_EMAC_RX_MODE 0xc8 #define EMAC_REG_EMAC_RX_MTU_SIZE 0x9c -- cgit v1.2.3 From 793bd450370bf85cd63cccaff5e2f1a62908a52f Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Tue, 2 Aug 2011 22:59:40 +0000 Subject: bnx2x: Fix LED behavior This fix resolve two problems seen regarding LED: 1. LED doesn't flash during port identification. 2. Traffic LED sometimes do not blink. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 45255bdc513..d8f6eff2d6b 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -5922,20 +5922,30 @@ int bnx2x_set_led(struct link_params *params, tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); EMAC_WR(bp, EMAC_REG_EMAC_LED, (tmp | EMAC_LED_OVERRIDE)); - return rc; + /* + * return here without enabling traffic + * LED blink andsetting rate in ON mode. + * In oper mode, enabling LED blink + * and setting rate is needed. + */ + if (mode == LED_MODE_ON) + return rc; } - } else if (SINGLE_MEDIA_DIRECT(params) && - (CHIP_IS_E1x(bp) || - CHIP_IS_E2(bp))) { + } else if (SINGLE_MEDIA_DIRECT(params)) { /* * This is a work-around for HW issue found when link * is up in CL73 */ - REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0); REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1); - } else { + if (CHIP_IS_E1x(bp) || + CHIP_IS_E2(bp) || + (mode == LED_MODE_ON)) + REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0); + else + REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, + hw_led_mode); + } else REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, hw_led_mode); - } REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port*4, 0); /* Set blinking rate to ~15.9Hz */ -- cgit v1.2.3 From 19af03a3c8cb1e07e31c070dfde9fac2e5e7796c Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Tue, 2 Aug 2011 22:59:47 +0000 Subject: bnx2x: Fix link issue with DAC over 578xx Fix no-link issue on BCM578xx when direct attached cable is connected since Warpcore microcode restart was missing to re-read the new mode. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index d8f6eff2d6b..6a3fdf8ace8 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -8029,6 +8029,9 @@ static void bnx2x_warpcore_set_limiting_mode(struct link_params *params, bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_UC_INFO_B1_FIRMWARE_MODE, &val); + /* Restart microcode to re-read the new mode */ + bnx2x_warpcore_reset_lane(bp, phy, 1); + bnx2x_warpcore_reset_lane(bp, phy, 0); } -- cgit v1.2.3 From fd38f73eb936f9d9f28e4f7ff598cc0780e09424 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Tue, 2 Aug 2011 22:59:53 +0000 Subject: bnx2x: Fix BCM84833 link BCM84833 fail to link due to incorrect auto-negotiation setting. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 6a3fdf8ace8..cf8b8d13ab6 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -9268,7 +9268,13 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, if (phy->req_duplex == DUPLEX_FULL) autoneg_val |= (1<<8); - bnx2x_cl45_write(bp, phy, + /* + * Always write this if this is not 84833. + * For 84833, write it only when it's a forced speed. + */ + if ((phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) || + ((autoneg_val & (1<<12)) == 0)) + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_8481_LEGACY_MII_CTRL, autoneg_val); @@ -9282,13 +9288,12 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x3200); - } else if (phy->req_line_speed != SPEED_10 && - phy->req_line_speed != SPEED_100) { + } else bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_8481_10GBASE_T_AN_CTRL, 1); - } + /* Save spirom version */ bnx2x_save_848xx_spirom_version(phy, params); @@ -9781,11 +9786,9 @@ static void bnx2x_848x3_link_reset(struct bnx2x_phy *phy, bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, 0x400f, &val16); - /* Put to low power mode on newer FW */ - if ((val16 & 0x303f) > 0x1009) - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, 0x800); + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_CTRL, 0x800); } } -- cgit v1.2.3 From d2059a061164120a1e44a0ca46fe08044d6d7c2d Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Tue, 2 Aug 2011 23:00:00 +0000 Subject: bnx2x: Fix BCM54618se invalid link indication After resetting BCM54618se, link partner would still see link since the PHY wasn't put into low-power state. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index cf8b8d13ab6..5e6f3513862 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -10219,8 +10219,15 @@ static void bnx2x_54618se_link_reset(struct bnx2x_phy *phy, u32 cfg_pin; u8 port; - /* This works with E3 only, no need to check the chip - before determining the port. */ + /* + * In case of no EPIO routed to reset the GPHY, put it + * in low power mode. + */ + bnx2x_cl22_write(bp, phy, MDIO_PMA_REG_CTRL, 0x800); + /* + * This works with E3 only, no need to check the chip + * before determining the port. + */ port = params->port; cfg_pin = (REG_RD(bp, params->shmem_base + offsetof(struct shmem_region, -- cgit v1.2.3 From afad009ad76ece72a3c9629bbc08f14459b9bba7 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Tue, 2 Aug 2011 23:00:06 +0000 Subject: bnx2x: Fix BCM578xx MAC test Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 5e6f3513862..01fb92c37a9 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -11541,13 +11541,12 @@ void bnx2x_init_xmac_loopback(struct link_params *params, * Set WC to loopback mode since link is required to provide clock * to the XMAC in 20G mode */ - if (vars->line_speed == SPEED_20000) { - bnx2x_set_aer_mmd(params, ¶ms->phy[0]); - bnx2x_warpcore_reset_lane(bp, ¶ms->phy[0], 0); - params->phy[INT_PHY].config_loopback( + bnx2x_set_aer_mmd(params, ¶ms->phy[0]); + bnx2x_warpcore_reset_lane(bp, ¶ms->phy[0], 0); + params->phy[INT_PHY].config_loopback( ¶ms->phy[INT_PHY], params); - } + bnx2x_xmac_enable(params, vars, 1); REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + params->port*4, 0); } -- cgit v1.2.3 From 28f4881cbf9ce285edfc245a8990af36d21c062f Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Tue, 2 Aug 2011 23:00:12 +0000 Subject: bnx2x: Clear MDIO access warning during first driver load Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/bnx2x/bnx2x_link.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 01fb92c37a9..d45b1555a60 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -11724,12 +11724,16 @@ int bnx2x_link_reset(struct link_params *params, struct link_vars *vars, bnx2x_set_led(params, vars, LED_MODE_OFF, 0); if (reset_ext_phy) { + bnx2x_set_mdio_clk(bp, params->chip_id, port); for (phy_index = EXT_PHY1; phy_index < params->num_phys; phy_index++) { - if (params->phy[phy_index].link_reset) + if (params->phy[phy_index].link_reset) { + bnx2x_set_aer_mmd(params, + ¶ms->phy[phy_index]); params->phy[phy_index].link_reset( ¶ms->phy[phy_index], params); + } if (params->phy[phy_index].flags & FLAGS_REARM_LATCH_SIGNAL) clear_latch_ind = 1; -- cgit v1.2.3 From f2c31e32b378a6653f8de606149d963baf11d7d3 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 29 Jul 2011 19:00:53 +0000 Subject: net: fix NULL dereferences in check_peer_redir() Gergely Kalman reported crashes in check_peer_redir(). It appears commit f39925dbde778 (ipv4: Cache learned redirect information in inetpeer.) added a race, leading to possible NULL ptr dereference. Since we can now change dst neighbour, we should make sure a reader can safely use a neighbour. Add RCU protection to dst neighbour, and make sure check_peer_redir() can be called safely by different cpus in parallel. As neighbours are already freed after one RCU grace period, this patch should not add typical RCU penalty (cache cold effects) Many thanks to Gergely for providing a pretty report pointing to the bug. Reported-by: Gergely Kalman Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/dst.h | 17 +++++++++++++---- net/ipv4/ip_output.c | 10 ++++++++-- net/ipv4/route.c | 14 ++++++++------ net/ipv6/addrconf.c | 2 +- net/ipv6/ip6_fib.c | 2 +- net/ipv6/ip6_output.c | 13 +++++++++++-- net/ipv6/route.c | 35 +++++++++++++++++++++++++---------- 7 files changed, 67 insertions(+), 26 deletions(-) diff --git a/include/net/dst.h b/include/net/dst.h index 29e255796ce..13d507d69dd 100644 --- a/include/net/dst.h +++ b/include/net/dst.h @@ -37,7 +37,7 @@ struct dst_entry { unsigned long _metrics; unsigned long expires; struct dst_entry *path; - struct neighbour *_neighbour; + struct neighbour __rcu *_neighbour; #ifdef CONFIG_XFRM struct xfrm_state *xfrm; #else @@ -88,12 +88,17 @@ struct dst_entry { static inline struct neighbour *dst_get_neighbour(struct dst_entry *dst) { - return dst->_neighbour; + return rcu_dereference(dst->_neighbour); +} + +static inline struct neighbour *dst_get_neighbour_raw(struct dst_entry *dst) +{ + return rcu_dereference_raw(dst->_neighbour); } static inline void dst_set_neighbour(struct dst_entry *dst, struct neighbour *neigh) { - dst->_neighbour = neigh; + rcu_assign_pointer(dst->_neighbour, neigh); } extern u32 *dst_cow_metrics_generic(struct dst_entry *dst, unsigned long old); @@ -382,8 +387,12 @@ static inline void dst_rcu_free(struct rcu_head *head) static inline void dst_confirm(struct dst_entry *dst) { if (dst) { - struct neighbour *n = dst_get_neighbour(dst); + struct neighbour *n; + + rcu_read_lock(); + n = dst_get_neighbour(dst); neigh_confirm(n); + rcu_read_unlock(); } } diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index ccaaa851ab4..77d3eded665 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -204,9 +204,15 @@ static inline int ip_finish_output2(struct sk_buff *skb) skb = skb2; } + rcu_read_lock(); neigh = dst_get_neighbour(dst); - if (neigh) - return neigh_output(neigh, skb); + if (neigh) { + int res = neigh_output(neigh, skb); + + rcu_read_unlock(); + return res; + } + rcu_read_unlock(); if (net_ratelimit()) printk(KERN_DEBUG "ip_finish_output2: No header cache and no neighbour!\n"); diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 1730689f560..6afc4eb5059 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1628,16 +1628,18 @@ static int check_peer_redir(struct dst_entry *dst, struct inet_peer *peer) { struct rtable *rt = (struct rtable *) dst; __be32 orig_gw = rt->rt_gateway; - struct neighbour *n; + struct neighbour *n, *old_n; dst_confirm(&rt->dst); - neigh_release(dst_get_neighbour(&rt->dst)); - dst_set_neighbour(&rt->dst, NULL); - rt->rt_gateway = peer->redirect_learned.a4; - rt_bind_neighbour(rt); - n = dst_get_neighbour(&rt->dst); + + n = ipv4_neigh_lookup(&rt->dst, &rt->rt_gateway); + if (IS_ERR(n)) + return PTR_ERR(n); + old_n = xchg(&rt->dst._neighbour, n); + if (old_n) + neigh_release(old_n); if (!n || !(n->nud_state & NUD_VALID)) { if (n) neigh_event_send(n, NULL); diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index a55500cc0b2..f012ebd87b4 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -656,7 +656,7 @@ ipv6_add_addr(struct inet6_dev *idev, const struct in6_addr *addr, int pfxlen, * layer address of our nexhop router */ - if (dst_get_neighbour(&rt->dst) == NULL) + if (dst_get_neighbour_raw(&rt->dst) == NULL) ifa->flags &= ~IFA_F_OPTIMISTIC; ifa->idev = idev; diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c index 54a4678955b..320d91d20ad 100644 --- a/net/ipv6/ip6_fib.c +++ b/net/ipv6/ip6_fib.c @@ -1455,7 +1455,7 @@ static int fib6_age(struct rt6_info *rt, void *arg) RT6_TRACE("aging clone %p\n", rt); return -1; } else if ((rt->rt6i_flags & RTF_GATEWAY) && - (!(dst_get_neighbour(&rt->dst)->flags & NTF_ROUTER))) { + (!(dst_get_neighbour_raw(&rt->dst)->flags & NTF_ROUTER))) { RT6_TRACE("purging route %p via non-router but gateway\n", rt); return -1; diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 32e5339db0c..4c882cf4e8a 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -135,10 +135,15 @@ static int ip6_finish_output2(struct sk_buff *skb) skb->len); } + rcu_read_lock(); neigh = dst_get_neighbour(dst); - if (neigh) - return neigh_output(neigh, skb); + if (neigh) { + int res = neigh_output(neigh, skb); + rcu_read_unlock(); + return res; + } + rcu_read_unlock(); IP6_INC_STATS_BH(dev_net(dst->dev), ip6_dst_idev(dst), IPSTATS_MIB_OUTNOROUTES); kfree_skb(skb); @@ -975,12 +980,14 @@ static int ip6_dst_lookup_tail(struct sock *sk, * dst entry and replace it instead with the * dst entry of the nexthop router */ + rcu_read_lock(); n = dst_get_neighbour(*dst); if (n && !(n->nud_state & NUD_VALID)) { struct inet6_ifaddr *ifp; struct flowi6 fl_gw6; int redirect; + rcu_read_unlock(); ifp = ipv6_get_ifaddr(net, &fl6->saddr, (*dst)->dev, 1); @@ -1000,6 +1007,8 @@ static int ip6_dst_lookup_tail(struct sock *sk, if ((err = (*dst)->error)) goto out_err_release; } + } else { + rcu_read_unlock(); } #endif diff --git a/net/ipv6/route.c b/net/ipv6/route.c index e8987da0666..9e69eb0ec6d 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -364,7 +364,7 @@ out: #ifdef CONFIG_IPV6_ROUTER_PREF static void rt6_probe(struct rt6_info *rt) { - struct neighbour *neigh = rt ? dst_get_neighbour(&rt->dst) : NULL; + struct neighbour *neigh; /* * Okay, this does not seem to be appropriate * for now, however, we need to check if it @@ -373,8 +373,10 @@ static void rt6_probe(struct rt6_info *rt) * Router Reachability Probe MUST be rate-limited * to no more than one per minute. */ + rcu_read_lock(); + neigh = rt ? dst_get_neighbour(&rt->dst) : NULL; if (!neigh || (neigh->nud_state & NUD_VALID)) - return; + goto out; read_lock_bh(&neigh->lock); if (!(neigh->nud_state & NUD_VALID) && time_after(jiffies, neigh->updated + rt->rt6i_idev->cnf.rtr_probe_interval)) { @@ -387,8 +389,11 @@ static void rt6_probe(struct rt6_info *rt) target = (struct in6_addr *)&neigh->primary_key; addrconf_addr_solict_mult(target, &mcaddr); ndisc_send_ns(rt->rt6i_dev, NULL, target, &mcaddr, NULL); - } else + } else { read_unlock_bh(&neigh->lock); + } +out: + rcu_read_unlock(); } #else static inline void rt6_probe(struct rt6_info *rt) @@ -412,8 +417,11 @@ static inline int rt6_check_dev(struct rt6_info *rt, int oif) static inline int rt6_check_neigh(struct rt6_info *rt) { - struct neighbour *neigh = dst_get_neighbour(&rt->dst); + struct neighbour *neigh; int m; + + rcu_read_lock(); + neigh = dst_get_neighbour(&rt->dst); if (rt->rt6i_flags & RTF_NONEXTHOP || !(rt->rt6i_flags & RTF_GATEWAY)) m = 1; @@ -430,6 +438,7 @@ static inline int rt6_check_neigh(struct rt6_info *rt) read_unlock_bh(&neigh->lock); } else m = 0; + rcu_read_unlock(); return m; } @@ -769,7 +778,7 @@ static struct rt6_info *rt6_alloc_clone(struct rt6_info *ort, rt->rt6i_dst.plen = 128; rt->rt6i_flags |= RTF_CACHE; rt->dst.flags |= DST_HOST; - dst_set_neighbour(&rt->dst, neigh_clone(dst_get_neighbour(&ort->dst))); + dst_set_neighbour(&rt->dst, neigh_clone(dst_get_neighbour_raw(&ort->dst))); } return rt; } @@ -803,7 +812,7 @@ restart: dst_hold(&rt->dst); read_unlock_bh(&table->tb6_lock); - if (!dst_get_neighbour(&rt->dst) && !(rt->rt6i_flags & RTF_NONEXTHOP)) + if (!dst_get_neighbour_raw(&rt->dst) && !(rt->rt6i_flags & RTF_NONEXTHOP)) nrt = rt6_alloc_cow(rt, &fl6->daddr, &fl6->saddr); else if (!(rt->dst.flags & DST_HOST)) nrt = rt6_alloc_clone(rt, &fl6->daddr); @@ -1587,7 +1596,7 @@ void rt6_redirect(const struct in6_addr *dest, const struct in6_addr *src, dst_confirm(&rt->dst); /* Duplicate redirect: silently ignore. */ - if (neigh == dst_get_neighbour(&rt->dst)) + if (neigh == dst_get_neighbour_raw(&rt->dst)) goto out; nrt = ip6_rt_copy(rt, dest); @@ -1682,7 +1691,7 @@ again: 1. It is connected route. Action: COW 2. It is gatewayed route or NONEXTHOP route. Action: clone it. */ - if (!dst_get_neighbour(&rt->dst) && !(rt->rt6i_flags & RTF_NONEXTHOP)) + if (!dst_get_neighbour_raw(&rt->dst) && !(rt->rt6i_flags & RTF_NONEXTHOP)) nrt = rt6_alloc_cow(rt, daddr, saddr); else nrt = rt6_alloc_clone(rt, daddr); @@ -2326,6 +2335,7 @@ static int rt6_fill_node(struct net *net, struct nlmsghdr *nlh; long expires; u32 table; + struct neighbour *n; if (prefix) { /* user wants prefix routes only */ if (!(rt->rt6i_flags & RTF_PREFIX_RT)) { @@ -2414,8 +2424,11 @@ static int rt6_fill_node(struct net *net, if (rtnetlink_put_metrics(skb, dst_metrics_ptr(&rt->dst)) < 0) goto nla_put_failure; - if (dst_get_neighbour(&rt->dst)) - NLA_PUT(skb, RTA_GATEWAY, 16, &dst_get_neighbour(&rt->dst)->primary_key); + rcu_read_lock(); + n = dst_get_neighbour(&rt->dst); + if (n) + NLA_PUT(skb, RTA_GATEWAY, 16, &n->primary_key); + rcu_read_unlock(); if (rt->dst.dev) NLA_PUT_U32(skb, RTA_OIF, rt->rt6i_dev->ifindex); @@ -2608,12 +2621,14 @@ static int rt6_info_route(struct rt6_info *rt, void *p_arg) #else seq_puts(m, "00000000000000000000000000000000 00 "); #endif + rcu_read_lock(); n = dst_get_neighbour(&rt->dst); if (n) { seq_printf(m, "%pi6", n->primary_key); } else { seq_puts(m, "00000000000000000000000000000000"); } + rcu_read_unlock(); seq_printf(m, " %08x %08x %08x %08x %8s\n", rt->rt6i_metric, atomic_read(&rt->dst.__refcnt), rt->dst.__use, rt->rt6i_flags, -- cgit v1.2.3 From 06fa0a883a01a34a0449ec116c5288c1d196b4b0 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Wed, 3 Aug 2011 16:38:59 -0700 Subject: mlx4: Fixing Ethernet unicast packet steering For older FW versions, fixing the usage of per port Mac table. For each port we must define the base QP number, which is passed to the HW. Setting the correct value in SET_PORT FW command to enable the steering. Reported-by: Roland Dreier Tested-by: Roland Dreier Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_port.c | 2 +- drivers/net/mlx4/main.c | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/mlx4/en_port.c b/drivers/net/mlx4/en_port.c index 5e710917806..5ada5b46911 100644 --- a/drivers/net/mlx4/en_port.c +++ b/drivers/net/mlx4/en_port.c @@ -128,7 +128,7 @@ int mlx4_SET_PORT_qpn_calc(struct mlx4_dev *dev, u8 port, u32 base_qpn, memset(context, 0, sizeof *context); context->base_qpn = cpu_to_be32(base_qpn); - context->n_mac = 0x7; + context->n_mac = 0x2; context->promisc = cpu_to_be32(promisc << SET_PORT_PROMISC_SHIFT | base_qpn); context->mcast = cpu_to_be32(m_promisc << SET_PORT_MC_PROMISC_SHIFT | diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c index c94b3426d35..f0ee35df4dd 100644 --- a/drivers/net/mlx4/main.c +++ b/drivers/net/mlx4/main.c @@ -1117,6 +1117,8 @@ static int mlx4_init_port_info(struct mlx4_dev *dev, int port) info->port = port; mlx4_init_mac_table(dev, &info->mac_table); mlx4_init_vlan_table(dev, &info->vlan_table); + info->base_qpn = dev->caps.reserved_qps_base[MLX4_QP_REGION_ETH_ADDR] + + (port - 1) * (1 << log_num_mac); sprintf(info->dev_name, "mlx4_port%d", port); info->port_attr.attr.name = info->dev_name; -- cgit v1.2.3 From 5ee5a07ce3a54de3d1192f8c9c2378d51a51e3bd Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Wed, 3 Aug 2011 06:42:42 +0000 Subject: irda: use PCI_VENDOR_ID_* Use PCI_VENDOR_ID_* from pci_ids.h instead of creating #define locally. Signed-off-by: Jon Mason Signed-off-by: David S. Miller --- drivers/net/irda/smsc-ircc2.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c index 954f6e938fb..8b1c3484d27 100644 --- a/drivers/net/irda/smsc-ircc2.c +++ b/drivers/net/irda/smsc-ircc2.c @@ -2405,8 +2405,6 @@ static int __init smsc_superio_lpc(unsigned short cfg_base) * addresses making a subsystem device table necessary. */ #ifdef CONFIG_PCI -#define PCIID_VENDOR_INTEL 0x8086 -#define PCIID_VENDOR_ALI 0x10b9 static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = { /* * Subsystems needing entries: @@ -2416,7 +2414,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini */ { /* Guessed entry */ - .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */ + .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */ .device = 0x24cc, .subvendor = 0x103c, .subdevice = 0x08bc, @@ -2429,7 +2427,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini .name = "HP nx5000 family", }, { - .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */ + .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */ .device = 0x24cc, .subvendor = 0x103c, .subdevice = 0x088c, @@ -2443,7 +2441,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini .name = "HP nc8000 family", }, { - .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */ + .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */ .device = 0x24cc, .subvendor = 0x103c, .subdevice = 0x0890, @@ -2456,7 +2454,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini .name = "HP nc6000 family", }, { - .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */ + .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801DBM LPC bridge */ .device = 0x24cc, .subvendor = 0x0e11, .subdevice = 0x0860, @@ -2471,7 +2469,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini }, { /* Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge */ - .vendor = PCIID_VENDOR_INTEL, + .vendor = PCI_VENDOR_ID_INTEL, .device = 0x24c0, .subvendor = 0x1179, .subdevice = 0xffff, /* 0xffff is "any" */ @@ -2484,7 +2482,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini .name = "Toshiba laptop with Intel 82801DB/DBL LPC bridge", }, { - .vendor = PCIID_VENDOR_INTEL, /* Intel 82801CAM ISA bridge */ + .vendor = PCI_VENDOR_ID_INTEL, /* Intel 82801CAM ISA bridge */ .device = 0x248c, .subvendor = 0x1179, .subdevice = 0xffff, /* 0xffff is "any" */ @@ -2498,7 +2496,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini }, { /* 82801DBM (ICH4-M) LPC Interface Bridge */ - .vendor = PCIID_VENDOR_INTEL, + .vendor = PCI_VENDOR_ID_INTEL, .device = 0x24cc, .subvendor = 0x1179, .subdevice = 0xffff, /* 0xffff is "any" */ @@ -2512,7 +2510,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini }, { /* ALi M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] */ - .vendor = PCIID_VENDOR_ALI, + .vendor = PCI_VENDOR_ID_AL, .device = 0x1533, .subvendor = 0x1179, .subdevice = 0xffff, /* 0xffff is "any" */ -- cgit v1.2.3 From 36c35416a94f5632c3addad05217ff02c39b3b61 Mon Sep 17 00:00:00 2001 From: Giuseppe Scrivano Date: Wed, 3 Aug 2011 22:10:29 +0000 Subject: cdc_ncm: fix endianness problem. Fix a misusage of the struct usb_cdc_notification to pass arguments to the usb_control_msg function. The usb_control_msg function expects host endian arguments but usb_cdc_notification stores these values as little endian. Now usb_control_msg is directly invoked with host endian values. Signed-off-by: Giuseppe Scrivano Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ncm.c | 156 +++++++++++++++++----------------------------- 1 file changed, 56 insertions(+), 100 deletions(-) diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index fd622a66ebb..a03336e086d 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -53,7 +53,7 @@ #include #include -#define DRIVER_VERSION "01-June-2011" +#define DRIVER_VERSION "04-Aug-2011" /* CDC NCM subclass 3.2.1 */ #define USB_CDC_NCM_NDP16_LENGTH_MIN 0x10 @@ -163,35 +163,8 @@ cdc_ncm_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info) usb_make_path(dev->udev, info->bus_info, sizeof(info->bus_info)); } -static int -cdc_ncm_do_request(struct cdc_ncm_ctx *ctx, struct usb_cdc_notification *req, - void *data, u16 flags, u16 *actlen, u16 timeout) -{ - int err; - - err = usb_control_msg(ctx->udev, (req->bmRequestType & USB_DIR_IN) ? - usb_rcvctrlpipe(ctx->udev, 0) : - usb_sndctrlpipe(ctx->udev, 0), - req->bNotificationType, req->bmRequestType, - req->wValue, - req->wIndex, data, - req->wLength, timeout); - - if (err < 0) { - if (actlen) - *actlen = 0; - return err; - } - - if (actlen) - *actlen = err; - - return 0; -} - static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx) { - struct usb_cdc_notification req; u32 val; u8 flags; u8 iface_no; @@ -200,14 +173,14 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx) iface_no = ctx->control->cur_altsetting->desc.bInterfaceNumber; - req.bmRequestType = USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE; - req.bNotificationType = USB_CDC_GET_NTB_PARAMETERS; - req.wValue = 0; - req.wIndex = cpu_to_le16(iface_no); - req.wLength = cpu_to_le16(sizeof(ctx->ncm_parm)); - - err = cdc_ncm_do_request(ctx, &req, &ctx->ncm_parm, 0, NULL, 1000); - if (err) { + err = usb_control_msg(ctx->udev, + usb_rcvctrlpipe(ctx->udev, 0), + USB_CDC_GET_NTB_PARAMETERS, + USB_TYPE_CLASS | USB_DIR_IN + | USB_RECIP_INTERFACE, + 0, iface_no, &ctx->ncm_parm, + sizeof(ctx->ncm_parm), 10000); + if (err < 0) { pr_debug("failed GET_NTB_PARAMETERS\n"); return 1; } @@ -253,31 +226,26 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx) /* inform device about NTB input size changes */ if (ctx->rx_max != le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize)) { - req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT | - USB_RECIP_INTERFACE; - req.bNotificationType = USB_CDC_SET_NTB_INPUT_SIZE; - req.wValue = 0; - req.wIndex = cpu_to_le16(iface_no); if (flags & USB_CDC_NCM_NCAP_NTB_INPUT_SIZE) { struct usb_cdc_ncm_ndp_input_size ndp_in_sz; - - req.wLength = 8; - ndp_in_sz.dwNtbInMaxSize = cpu_to_le32(ctx->rx_max); - ndp_in_sz.wNtbInMaxDatagrams = - cpu_to_le16(CDC_NCM_DPT_DATAGRAMS_MAX); - ndp_in_sz.wReserved = 0; - err = cdc_ncm_do_request(ctx, &req, &ndp_in_sz, 0, NULL, - 1000); + err = usb_control_msg(ctx->udev, + usb_sndctrlpipe(ctx->udev, 0), + USB_CDC_SET_NTB_INPUT_SIZE, + USB_TYPE_CLASS | USB_DIR_OUT + | USB_RECIP_INTERFACE, + 0, iface_no, &ndp_in_sz, 8, 1000); } else { __le32 dwNtbInMaxSize = cpu_to_le32(ctx->rx_max); - - req.wLength = 4; - err = cdc_ncm_do_request(ctx, &req, &dwNtbInMaxSize, 0, - NULL, 1000); + err = usb_control_msg(ctx->udev, + usb_sndctrlpipe(ctx->udev, 0), + USB_CDC_SET_NTB_INPUT_SIZE, + USB_TYPE_CLASS | USB_DIR_OUT + | USB_RECIP_INTERFACE, + 0, iface_no, &dwNtbInMaxSize, 4, 1000); } - if (err) + if (err < 0) pr_debug("Setting NTB Input Size failed\n"); } @@ -332,29 +300,24 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx) /* set CRC Mode */ if (flags & USB_CDC_NCM_NCAP_CRC_MODE) { - req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT | - USB_RECIP_INTERFACE; - req.bNotificationType = USB_CDC_SET_CRC_MODE; - req.wValue = cpu_to_le16(USB_CDC_NCM_CRC_NOT_APPENDED); - req.wIndex = cpu_to_le16(iface_no); - req.wLength = 0; - - err = cdc_ncm_do_request(ctx, &req, NULL, 0, NULL, 1000); - if (err) + err = usb_control_msg(ctx->udev, usb_sndctrlpipe(ctx->udev, 0), + USB_CDC_SET_CRC_MODE, + USB_TYPE_CLASS | USB_DIR_OUT + | USB_RECIP_INTERFACE, + USB_CDC_NCM_CRC_NOT_APPENDED, + iface_no, NULL, 0, 1000); + if (err < 0) pr_debug("Setting CRC mode off failed\n"); } /* set NTB format, if both formats are supported */ if (ntb_fmt_supported & USB_CDC_NCM_NTH32_SIGN) { - req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT | - USB_RECIP_INTERFACE; - req.bNotificationType = USB_CDC_SET_NTB_FORMAT; - req.wValue = cpu_to_le16(USB_CDC_NCM_NTB16_FORMAT); - req.wIndex = cpu_to_le16(iface_no); - req.wLength = 0; - - err = cdc_ncm_do_request(ctx, &req, NULL, 0, NULL, 1000); - if (err) + err = usb_control_msg(ctx->udev, usb_sndctrlpipe(ctx->udev, 0), + USB_CDC_SET_NTB_FORMAT, USB_TYPE_CLASS + | USB_DIR_OUT | USB_RECIP_INTERFACE, + USB_CDC_NCM_NTB16_FORMAT, + iface_no, NULL, 0, 1000); + if (err < 0) pr_debug("Setting NTB format to 16-bit failed\n"); } @@ -364,17 +327,13 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx) if (flags & USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE) { __le16 max_datagram_size; u16 eth_max_sz = le16_to_cpu(ctx->ether_desc->wMaxSegmentSize); - - req.bmRequestType = USB_TYPE_CLASS | USB_DIR_IN | - USB_RECIP_INTERFACE; - req.bNotificationType = USB_CDC_GET_MAX_DATAGRAM_SIZE; - req.wValue = 0; - req.wIndex = cpu_to_le16(iface_no); - req.wLength = cpu_to_le16(2); - - err = cdc_ncm_do_request(ctx, &req, &max_datagram_size, 0, NULL, - 1000); - if (err) { + err = usb_control_msg(ctx->udev, usb_rcvctrlpipe(ctx->udev, 0), + USB_CDC_GET_MAX_DATAGRAM_SIZE, + USB_TYPE_CLASS | USB_DIR_IN + | USB_RECIP_INTERFACE, + 0, iface_no, &max_datagram_size, + 2, 1000); + if (err < 0) { pr_debug("GET_MAX_DATAGRAM_SIZE failed, use size=%u\n", CDC_NCM_MIN_DATAGRAM_SIZE); } else { @@ -395,17 +354,15 @@ static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx) CDC_NCM_MIN_DATAGRAM_SIZE; /* if value changed, update device */ - req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT | - USB_RECIP_INTERFACE; - req.bNotificationType = USB_CDC_SET_MAX_DATAGRAM_SIZE; - req.wValue = 0; - req.wIndex = cpu_to_le16(iface_no); - req.wLength = 2; - max_datagram_size = cpu_to_le16(ctx->max_datagram_size); - - err = cdc_ncm_do_request(ctx, &req, &max_datagram_size, - 0, NULL, 1000); - if (err) + err = usb_control_msg(ctx->udev, + usb_sndctrlpipe(ctx->udev, 0), + USB_CDC_SET_MAX_DATAGRAM_SIZE, + USB_TYPE_CLASS | USB_DIR_OUT + | USB_RECIP_INTERFACE, + 0, + iface_no, &max_datagram_size, + 2, 1000); + if (err < 0) pr_debug("SET_MAX_DATAGRAM_SIZE failed\n"); } @@ -671,7 +628,7 @@ cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb) u32 rem; u32 offset; u32 last_offset; - u16 n = 0; + u16 n = 0, index; u8 ready2send = 0; /* if there is a remaining skb, it gets priority */ @@ -859,8 +816,8 @@ cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb) cpu_to_le16(sizeof(ctx->tx_ncm.nth16)); ctx->tx_ncm.nth16.wSequence = cpu_to_le16(ctx->tx_seq); ctx->tx_ncm.nth16.wBlockLength = cpu_to_le16(last_offset); - ctx->tx_ncm.nth16.wNdpIndex = ALIGN(sizeof(struct usb_cdc_ncm_nth16), - ctx->tx_ndp_modulus); + index = ALIGN(sizeof(struct usb_cdc_ncm_nth16), ctx->tx_ndp_modulus); + ctx->tx_ncm.nth16.wNdpIndex = cpu_to_le16(index); memcpy(skb_out->data, &(ctx->tx_ncm.nth16), sizeof(ctx->tx_ncm.nth16)); ctx->tx_seq++; @@ -873,12 +830,11 @@ cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb) ctx->tx_ncm.ndp16.wLength = cpu_to_le16(rem); ctx->tx_ncm.ndp16.wNextNdpIndex = 0; /* reserved */ - memcpy(((u8 *)skb_out->data) + ctx->tx_ncm.nth16.wNdpIndex, + memcpy(((u8 *)skb_out->data) + index, &(ctx->tx_ncm.ndp16), sizeof(ctx->tx_ncm.ndp16)); - memcpy(((u8 *)skb_out->data) + ctx->tx_ncm.nth16.wNdpIndex + - sizeof(ctx->tx_ncm.ndp16), + memcpy(((u8 *)skb_out->data) + index + sizeof(ctx->tx_ncm.ndp16), &(ctx->tx_ncm.dpe16), (ctx->tx_curr_frame_num + 1) * sizeof(struct usb_cdc_ncm_dpe16)); -- cgit v1.2.3 From d3e614577198757d5854caa912e88f2d4296479b Mon Sep 17 00:00:00 2001 From: Tord Andersson Date: Wed, 3 Aug 2011 22:11:47 +0000 Subject: macb: restore wrap bit when performing underrun cleanup When TX underrun occurs, a cleanup is performed that marks all buffers as used. As a side effect it also clears the wrap bit in the last buffer. This patch will restore the wrap bit. Signed-off-by: Tord Andersson Acked-by: Nicolas Ferre Signed-off-by: David S. Miller --- drivers/net/macb.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 0fcdc25699d..dc4e305a108 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -322,6 +322,9 @@ static void macb_tx(struct macb *bp) for (i = 0; i < TX_RING_SIZE; i++) bp->tx_ring[i].ctrl = MACB_BIT(TX_USED); + /* Add wrap bit */ + bp->tx_ring[TX_RING_SIZE - 1].ctrl |= MACB_BIT(TX_WRAP); + /* free transmit buffer in upper layer*/ for (tail = bp->tx_tail; tail != head; tail = NEXT_TX(tail)) { struct ring_info *rp = &bp->tx_skb[tail]; -- cgit v1.2.3 From 945a51517cc0bd9e461f2018624dfc1faef9ddee Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Wed, 20 Jul 2011 00:56:21 +0000 Subject: intel drivers: repair missing flush operations after review of all intel drivers, found several instances where drivers had the incorrect pattern of: memory mapped write(); delay(); which should always be: memory mapped write(); write flush(); /* aka memory mapped read */ delay(); explanation: The reason for including the flush is that writes can be held (posted) in PCI/PCIe bridges, but the read always has to complete synchronously and therefore has to flush all pending writes to a device. If a write is held and followed by a delay, the delay means nothing because the write may not have reached hardware (maybe even not until the next read) Signed-off-by: Jesse Brandeburg Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/e1000/e1000_ethtool.c | 6 ++++++ drivers/net/e1000/e1000_hw.c | 3 +++ drivers/net/e1000e/es2lan.c | 2 ++ drivers/net/e1000e/ethtool.c | 9 +++++++++ drivers/net/e1000e/ich8lan.c | 4 ++++ drivers/net/e1000e/lib.c | 1 + drivers/net/e1000e/phy.c | 2 ++ drivers/net/igb/e1000_nvm.c | 1 + drivers/net/igb/igb_ethtool.c | 5 +++++ drivers/net/igb/igb_main.c | 2 ++ drivers/net/igbvf/netdev.c | 2 ++ drivers/net/ixgb/ixgb_ee.c | 9 +++++++++ drivers/net/ixgb/ixgb_hw.c | 2 ++ drivers/net/ixgbe/ixgbe_common.c | 1 + drivers/net/ixgbe/ixgbe_ethtool.c | 5 +++++ drivers/net/ixgbe/ixgbe_main.c | 1 + drivers/net/ixgbe/ixgbe_phy.c | 3 +++ drivers/net/ixgbe/ixgbe_x540.c | 1 + 18 files changed, 59 insertions(+) diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index c5f0f04219f..5548d464261 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -838,6 +838,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) /* Disable all the interrupts */ ew32(IMC, 0xFFFFFFFF); + E1000_WRITE_FLUSH(); msleep(10); /* Test each interrupt */ @@ -856,6 +857,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) adapter->test_icr = 0; ew32(IMC, mask); ew32(ICS, mask); + E1000_WRITE_FLUSH(); msleep(10); if (adapter->test_icr & mask) { @@ -873,6 +875,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) adapter->test_icr = 0; ew32(IMS, mask); ew32(ICS, mask); + E1000_WRITE_FLUSH(); msleep(10); if (!(adapter->test_icr & mask)) { @@ -890,6 +893,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) adapter->test_icr = 0; ew32(IMC, ~mask & 0x00007FFF); ew32(ICS, ~mask & 0x00007FFF); + E1000_WRITE_FLUSH(); msleep(10); if (adapter->test_icr) { @@ -901,6 +905,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) /* Disable all the interrupts */ ew32(IMC, 0xFFFFFFFF); + E1000_WRITE_FLUSH(); msleep(10); /* Unhook test interrupt handler */ @@ -1394,6 +1399,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter) if (unlikely(++k == txdr->count)) k = 0; } ew32(TDT, k); + E1000_WRITE_FLUSH(); msleep(200); time = jiffies; /* set the start time for the receive */ good_cnt = 0; diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 1698622af43..8545c7aa93e 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -446,6 +446,7 @@ s32 e1000_reset_hw(struct e1000_hw *hw) /* Must reset the PHY before resetting the MAC */ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { ew32(CTRL, (ctrl | E1000_CTRL_PHY_RST)); + E1000_WRITE_FLUSH(); msleep(5); } @@ -3752,6 +3753,7 @@ static s32 e1000_acquire_eeprom(struct e1000_hw *hw) /* Clear SK and CS */ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); ew32(EECD, eecd); + E1000_WRITE_FLUSH(); udelay(1); } @@ -3824,6 +3826,7 @@ static void e1000_release_eeprom(struct e1000_hw *hw) eecd &= ~E1000_EECD_SK; /* Lower SCK */ ew32(EECD, eecd); + E1000_WRITE_FLUSH(); udelay(hw->eeprom.delay_usec); } else if (hw->eeprom.type == e1000_eeprom_microwire) { diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c index c0ecb2d9fdb..e4f42257c24 100644 --- a/drivers/net/e1000e/es2lan.c +++ b/drivers/net/e1000e/es2lan.c @@ -1313,6 +1313,7 @@ static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN; ew32(KMRNCTRLSTA, kmrnctrlsta); + e1e_flush(); udelay(2); @@ -1347,6 +1348,7 @@ static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & E1000_KMRNCTRLSTA_OFFSET) | data; ew32(KMRNCTRLSTA, kmrnctrlsta); + e1e_flush(); udelay(2); diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index cb1a3623253..72756e4e644 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -964,6 +964,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) /* Disable all the interrupts */ ew32(IMC, 0xFFFFFFFF); + e1e_flush(); usleep_range(10000, 20000); /* Test each interrupt */ @@ -996,6 +997,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) adapter->test_icr = 0; ew32(IMC, mask); ew32(ICS, mask); + e1e_flush(); usleep_range(10000, 20000); if (adapter->test_icr & mask) { @@ -1014,6 +1016,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) adapter->test_icr = 0; ew32(IMS, mask); ew32(ICS, mask); + e1e_flush(); usleep_range(10000, 20000); if (!(adapter->test_icr & mask)) { @@ -1032,6 +1035,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) adapter->test_icr = 0; ew32(IMC, ~mask & 0x00007FFF); ew32(ICS, ~mask & 0x00007FFF); + e1e_flush(); usleep_range(10000, 20000); if (adapter->test_icr) { @@ -1043,6 +1047,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) /* Disable all the interrupts */ ew32(IMC, 0xFFFFFFFF); + e1e_flush(); usleep_range(10000, 20000); /* Unhook test interrupt handler */ @@ -1276,6 +1281,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) E1000_CTRL_FD); /* Force Duplex to FULL */ ew32(CTRL, ctrl_reg); + e1e_flush(); udelay(500); return 0; @@ -1418,6 +1424,7 @@ static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter) */ #define E1000_SERDES_LB_ON 0x410 ew32(SCTL, E1000_SERDES_LB_ON); + e1e_flush(); usleep_range(10000, 20000); return 0; @@ -1513,6 +1520,7 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter) hw->phy.media_type == e1000_media_type_internal_serdes) { #define E1000_SERDES_LB_OFF 0x400 ew32(SCTL, E1000_SERDES_LB_OFF); + e1e_flush(); usleep_range(10000, 20000); break; } @@ -1592,6 +1600,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter) k = 0; } ew32(TDT, k); + e1e_flush(); msleep(200); time = jiffies; /* set the start time for the receive */ good_cnt = 0; diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index c1752124f3c..f7a75c1531a 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -283,6 +283,7 @@ static void e1000_toggle_lanphypc_value_ich8lan(struct e1000_hw *hw) ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE; ctrl &= ~E1000_CTRL_LANPHYPC_VALUE; ew32(CTRL, ctrl); + e1e_flush(); udelay(10); ctrl &= ~E1000_CTRL_LANPHYPC_OVERRIDE; ew32(CTRL, ctrl); @@ -1230,9 +1231,11 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable) ew32(CTRL, reg); ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_SPD_BYPS); + e1e_flush(); udelay(20); ew32(CTRL, ctrl_reg); ew32(CTRL_EXT, ctrl_ext); + e1e_flush(); udelay(20); out: @@ -3090,6 +3093,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) ret_val = e1000_acquire_swflag_ich8lan(hw); e_dbg("Issuing a global reset to ich8lan\n"); ew32(CTRL, (ctrl | E1000_CTRL_RST)); + /* cannot issue a flush here because it hangs the hardware */ msleep(20); if (!ret_val) diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 65580b40594..7898a67d650 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -1986,6 +1986,7 @@ static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw) /* Clear SK and CS */ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); ew32(EECD, eecd); + e1e_flush(); udelay(1); /* diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 2a6ee13285b..8666476cb9b 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -537,6 +537,7 @@ static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data, kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN; ew32(KMRNCTRLSTA, kmrnctrlsta); + e1e_flush(); udelay(2); @@ -609,6 +610,7 @@ static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data, kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & E1000_KMRNCTRLSTA_OFFSET) | data; ew32(KMRNCTRLSTA, kmrnctrlsta); + e1e_flush(); udelay(2); diff --git a/drivers/net/igb/e1000_nvm.c b/drivers/net/igb/e1000_nvm.c index 7dcd65cede5..40407124e72 100644 --- a/drivers/net/igb/e1000_nvm.c +++ b/drivers/net/igb/e1000_nvm.c @@ -285,6 +285,7 @@ static s32 igb_ready_nvm_eeprom(struct e1000_hw *hw) /* Clear SK and CS */ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); wr32(E1000_EECD, eecd); + wrfl(); udelay(1); timeout = NVM_MAX_RETRY_SPI; diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index ff244ce803c..414b0225be8 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -1225,6 +1225,7 @@ static int igb_intr_test(struct igb_adapter *adapter, u64 *data) /* Disable all the interrupts */ wr32(E1000_IMC, ~0); + wrfl(); msleep(10); /* Define all writable bits for ICS */ @@ -1268,6 +1269,7 @@ static int igb_intr_test(struct igb_adapter *adapter, u64 *data) wr32(E1000_IMC, mask); wr32(E1000_ICS, mask); + wrfl(); msleep(10); if (adapter->test_icr & mask) { @@ -1289,6 +1291,7 @@ static int igb_intr_test(struct igb_adapter *adapter, u64 *data) wr32(E1000_IMS, mask); wr32(E1000_ICS, mask); + wrfl(); msleep(10); if (!(adapter->test_icr & mask)) { @@ -1310,6 +1313,7 @@ static int igb_intr_test(struct igb_adapter *adapter, u64 *data) wr32(E1000_IMC, ~mask); wr32(E1000_ICS, ~mask); + wrfl(); msleep(10); if (adapter->test_icr & mask) { @@ -1321,6 +1325,7 @@ static int igb_intr_test(struct igb_adapter *adapter, u64 *data) /* Disable all the interrupts */ wr32(E1000_IMC, ~0); + wrfl(); msleep(10); /* Unhook test interrupt handler */ diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index dc599059512..ae3937e8cde 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1052,6 +1052,7 @@ msi_only: kfree(adapter->vf_data); adapter->vf_data = NULL; wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ); + wrfl(); msleep(100); dev_info(&adapter->pdev->dev, "IOV Disabled\n"); } @@ -2198,6 +2199,7 @@ static void __devexit igb_remove(struct pci_dev *pdev) kfree(adapter->vf_data); adapter->vf_data = NULL; wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ); + wrfl(); msleep(100); dev_info(&pdev->dev, "IOV Disabled\n"); } diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c index 1330c8e932d..40ed066e3ef 100644 --- a/drivers/net/igbvf/netdev.c +++ b/drivers/net/igbvf/netdev.c @@ -1226,6 +1226,7 @@ static void igbvf_configure_tx(struct igbvf_adapter *adapter) /* disable transmits */ txdctl = er32(TXDCTL(0)); ew32(TXDCTL(0), txdctl & ~E1000_TXDCTL_QUEUE_ENABLE); + e1e_flush(); msleep(10); /* Setup the HW Tx Head and Tail descriptor pointers */ @@ -1306,6 +1307,7 @@ static void igbvf_configure_rx(struct igbvf_adapter *adapter) /* disable receives */ rxdctl = er32(RXDCTL(0)); ew32(RXDCTL(0), rxdctl & ~E1000_RXDCTL_QUEUE_ENABLE); + e1e_flush(); msleep(10); rdlen = rx_ring->count * sizeof(union e1000_adv_rx_desc); diff --git a/drivers/net/ixgb/ixgb_ee.c b/drivers/net/ixgb/ixgb_ee.c index c982ab9f900..38b362b6785 100644 --- a/drivers/net/ixgb/ixgb_ee.c +++ b/drivers/net/ixgb/ixgb_ee.c @@ -57,6 +57,7 @@ ixgb_raise_clock(struct ixgb_hw *hw, */ *eecd_reg = *eecd_reg | IXGB_EECD_SK; IXGB_WRITE_REG(hw, EECD, *eecd_reg); + IXGB_WRITE_FLUSH(hw); udelay(50); } @@ -75,6 +76,7 @@ ixgb_lower_clock(struct ixgb_hw *hw, */ *eecd_reg = *eecd_reg & ~IXGB_EECD_SK; IXGB_WRITE_REG(hw, EECD, *eecd_reg); + IXGB_WRITE_FLUSH(hw); udelay(50); } @@ -112,6 +114,7 @@ ixgb_shift_out_bits(struct ixgb_hw *hw, eecd_reg |= IXGB_EECD_DI; IXGB_WRITE_REG(hw, EECD, eecd_reg); + IXGB_WRITE_FLUSH(hw); udelay(50); @@ -206,21 +209,25 @@ ixgb_standby_eeprom(struct ixgb_hw *hw) /* Deselect EEPROM */ eecd_reg &= ~(IXGB_EECD_CS | IXGB_EECD_SK); IXGB_WRITE_REG(hw, EECD, eecd_reg); + IXGB_WRITE_FLUSH(hw); udelay(50); /* Clock high */ eecd_reg |= IXGB_EECD_SK; IXGB_WRITE_REG(hw, EECD, eecd_reg); + IXGB_WRITE_FLUSH(hw); udelay(50); /* Select EEPROM */ eecd_reg |= IXGB_EECD_CS; IXGB_WRITE_REG(hw, EECD, eecd_reg); + IXGB_WRITE_FLUSH(hw); udelay(50); /* Clock low */ eecd_reg &= ~IXGB_EECD_SK; IXGB_WRITE_REG(hw, EECD, eecd_reg); + IXGB_WRITE_FLUSH(hw); udelay(50); } @@ -239,11 +246,13 @@ ixgb_clock_eeprom(struct ixgb_hw *hw) /* Rising edge of clock */ eecd_reg |= IXGB_EECD_SK; IXGB_WRITE_REG(hw, EECD, eecd_reg); + IXGB_WRITE_FLUSH(hw); udelay(50); /* Falling edge of clock */ eecd_reg &= ~IXGB_EECD_SK; IXGB_WRITE_REG(hw, EECD, eecd_reg); + IXGB_WRITE_FLUSH(hw); udelay(50); } diff --git a/drivers/net/ixgb/ixgb_hw.c b/drivers/net/ixgb/ixgb_hw.c index 6cb2e42ff4c..3d61a9e4faf 100644 --- a/drivers/net/ixgb/ixgb_hw.c +++ b/drivers/net/ixgb/ixgb_hw.c @@ -149,6 +149,7 @@ ixgb_adapter_stop(struct ixgb_hw *hw) */ IXGB_WRITE_REG(hw, RCTL, IXGB_READ_REG(hw, RCTL) & ~IXGB_RCTL_RXEN); IXGB_WRITE_REG(hw, TCTL, IXGB_READ_REG(hw, TCTL) & ~IXGB_TCTL_TXEN); + IXGB_WRITE_FLUSH(hw); msleep(IXGB_DELAY_BEFORE_RESET); /* Issue a global reset to the MAC. This will reset the chip's @@ -1220,6 +1221,7 @@ ixgb_optics_reset_bcm(struct ixgb_hw *hw) ctrl &= ~IXGB_CTRL0_SDP2; ctrl |= IXGB_CTRL0_SDP3; IXGB_WRITE_REG(hw, CTRL0, ctrl); + IXGB_WRITE_FLUSH(hw); /* SerDes needs extra delay */ msleep(IXGB_SUN_PHY_RESET_DELAY); diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c index 777051f54e5..fc1375f26fe 100644 --- a/drivers/net/ixgbe/ixgbe_common.c +++ b/drivers/net/ixgbe/ixgbe_common.c @@ -2632,6 +2632,7 @@ s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index) autoc_reg |= IXGBE_AUTOC_AN_RESTART; autoc_reg |= IXGBE_AUTOC_FLU; IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); + IXGBE_WRITE_FLUSH(hw); usleep_range(10000, 20000); } diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index dc649553a0a..82d4244c6e1 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -1378,6 +1378,7 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data) /* Disable all the interrupts */ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF); + IXGBE_WRITE_FLUSH(&adapter->hw); usleep_range(10000, 20000); /* Test each interrupt */ @@ -1398,6 +1399,7 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data) ~mask & 0x00007FFF); IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, ~mask & 0x00007FFF); + IXGBE_WRITE_FLUSH(&adapter->hw); usleep_range(10000, 20000); if (adapter->test_icr & mask) { @@ -1415,6 +1417,7 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data) adapter->test_icr = 0; IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask); IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask); + IXGBE_WRITE_FLUSH(&adapter->hw); usleep_range(10000, 20000); if (!(adapter->test_icr &mask)) { @@ -1435,6 +1438,7 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data) ~mask & 0x00007FFF); IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, ~mask & 0x00007FFF); + IXGBE_WRITE_FLUSH(&adapter->hw); usleep_range(10000, 20000); if (adapter->test_icr) { @@ -1446,6 +1450,7 @@ static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data) /* Disable all the interrupts */ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF); + IXGBE_WRITE_FLUSH(&adapter->hw); usleep_range(10000, 20000); /* Unhook test interrupt handler */ diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 1be617545dc..26b132bca43 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -184,6 +184,7 @@ static inline void ixgbe_disable_sriov(struct ixgbe_adapter *adapter) vmdctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL); vmdctl &= ~IXGBE_VT_CTL_POOL_MASK; IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl); + IXGBE_WRITE_FLUSH(hw); /* take a breather then clean up driver data */ msleep(100); diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c index 735f686c3b3..f7ca3511b9f 100644 --- a/drivers/net/ixgbe/ixgbe_phy.c +++ b/drivers/net/ixgbe/ixgbe_phy.c @@ -1585,6 +1585,7 @@ static s32 ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) *i2cctl |= IXGBE_I2C_CLK_OUT; IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl); + IXGBE_WRITE_FLUSH(hw); /* SCL rise time (1000ns) */ udelay(IXGBE_I2C_T_RISE); @@ -1605,6 +1606,7 @@ static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) *i2cctl &= ~IXGBE_I2C_CLK_OUT; IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl); + IXGBE_WRITE_FLUSH(hw); /* SCL fall time (300ns) */ udelay(IXGBE_I2C_T_FALL); @@ -1628,6 +1630,7 @@ static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data) *i2cctl &= ~IXGBE_I2C_DATA_OUT; IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl); + IXGBE_WRITE_FLUSH(hw); /* Data rise/fall (1000ns/300ns) and set-up time (250ns) */ udelay(IXGBE_I2C_T_RISE + IXGBE_I2C_T_FALL + IXGBE_I2C_T_SU_DATA); diff --git a/drivers/net/ixgbe/ixgbe_x540.c b/drivers/net/ixgbe/ixgbe_x540.c index bec30ed91ad..2696c78e9f4 100644 --- a/drivers/net/ixgbe/ixgbe_x540.c +++ b/drivers/net/ixgbe/ixgbe_x540.c @@ -162,6 +162,7 @@ mac_reset_top: ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD; IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext); + IXGBE_WRITE_FLUSH(hw); msleep(50); -- cgit v1.2.3 From b9e06f70dc186f8353cc593f2b4609383b3be7a9 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 22 Jul 2011 06:21:41 +0000 Subject: e1000e: remove unnecessary check for NULL pointer The array shadow_ram is never NULL. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/e1000e/ich8lan.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index f7a75c1531a..4e36978b8fd 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -2137,8 +2137,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, ret_val = 0; for (i = 0; i < words; i++) { - if ((dev_spec->shadow_ram) && - (dev_spec->shadow_ram[offset+i].modified)) { + if (dev_spec->shadow_ram[offset+i].modified) { data[i] = dev_spec->shadow_ram[offset+i].value; } else { ret_val = e1000_read_flash_word_ich8lan(hw, -- cgit v1.2.3 From 9fb7a5f77b26dedfcfa4e3a36fe207f818662bee Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 29 Jul 2011 05:52:51 +0000 Subject: e1000e: minor re-order of #include files The recent commit a6b7a407 when back-ported to the out-of-tree e1000e driver caused a compilation error on older kernels which required a re-ordering of the #include files. This cosmetic patch syncs the two drivers for easier maintainability. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/e1000e/ethtool.c | 2 +- drivers/net/e1000e/netdev.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 72756e4e644..06d88f316dc 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -28,8 +28,8 @@ /* ethtool support for e1000 */ -#include #include +#include #include #include #include diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 4353ad56cf1..ab4be80f7ab 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -31,12 +31,12 @@ #include #include #include -#include #include #include #include #include #include +#include #include #include #include -- cgit v1.2.3 From 6d337dce664b6872ddf1655f6b1fcab76ce35b08 Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Thu, 7 Jul 2011 00:24:56 +0000 Subject: igb: fix WOL on second port of i350 device This patch fixes a problem where WOL would fail on second port of i350 device. Reported-by: Martin Wilck Reported-by: Stefan Assmann Signed-off-by: Carolyn Wyborny Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/igb/igb_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index ae3937e8cde..40d4c405fd7 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -2023,7 +2023,7 @@ static int __devinit igb_probe(struct pci_dev *pdev, if (hw->bus.func == 0) hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data); - else if (hw->mac.type == e1000_82580) + else if (hw->mac.type >= e1000_82580) hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A + NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1, &eeprom_data); -- cgit v1.2.3 From 2a72c31ee4aa31b6a762390e4811a0edf5eefcef Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Wed, 20 Jul 2011 02:27:05 +0000 Subject: ixgbe: fix __ixgbe_notify_dca() bail out code The way __ixgbe_notify_dca() was currently set up it would not be possible to add a requester. Both cases of the IXGBE_FLAG_DCA_ENABLED bit being on and off would lead to the function exiting for a DCA_PROVIDER_ADD. Signed-off-by: Don Skidmore Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ixgbe/ixgbe_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 26b132bca43..e86297b3273 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -1006,7 +1006,7 @@ static int __ixgbe_notify_dca(struct device *dev, void *data) struct ixgbe_adapter *adapter = dev_get_drvdata(dev); unsigned long event = *(unsigned long *)data; - if (!(adapter->flags & IXGBE_FLAG_DCA_ENABLED)) + if (!(adapter->flags & IXGBE_FLAG_DCA_CAPABLE)) return 0; switch (event) { -- cgit v1.2.3 From b57e35bd0e545181c94405ce35b89000aed56cc5 Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Thu, 28 Jul 2011 06:17:04 +0000 Subject: ixgbe: fix PHY link setup for 82599 Fix pointer to setup_link for 82599. This resolves some link issues when advertising modes unsupported by the link partner. Signed-off-by: Emil Tantilov Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ixgbe/ixgbe_82599.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index 3b3dd4df4c5..34f30ec79c2 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -213,6 +213,7 @@ static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) switch (hw->phy.type) { case ixgbe_phy_tn: phy->ops.check_link = &ixgbe_check_phy_link_tnx; + phy->ops.setup_link = &ixgbe_setup_phy_link_tnx; phy->ops.get_firmware_version = &ixgbe_get_phy_firmware_version_tnx; break; -- cgit v1.2.3 From 728ffb86f10873aaf4abd26dde691ee40ae731fe Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 4 Aug 2011 14:07:38 +0000 Subject: net: sendmmsg should only return an error if no messages were sent sendmmsg uses a similar error return strategy as recvmmsg but it turns out to be a confusing way to communicate errors. The current code stores the error code away and returns it on the next sendmmsg call. This means a call with completely valid arguments could get an error from a previous call. Change things so we only return an error if no datagrams could be sent. If less than the requested number of messages were sent, the application must retry starting at the first failed one and if the problem is persistent the error will be returned. This matches the behaviour of other syscalls like read/write - it is not an error if less than the requested number of elements are sent. Signed-off-by: Anton Blanchard Cc: stable [3.0+] Signed-off-by: David S. Miller --- net/socket.c | 27 +++------------------------ 1 file changed, 3 insertions(+), 24 deletions(-) diff --git a/net/socket.c b/net/socket.c index b1cbbcd9255..e4ed2359eb4 100644 --- a/net/socket.c +++ b/net/socket.c @@ -2005,12 +2005,9 @@ int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, if (!sock) return err; - err = sock_error(sock->sk); - if (err) - goto out_put; - entry = mmsg; compat_entry = (struct compat_mmsghdr __user *)mmsg; + err = 0; while (datagrams < vlen) { /* @@ -2037,29 +2034,11 @@ int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, ++datagrams; } -out_put: fput_light(sock->file, fput_needed); - if (err == 0) - return datagrams; - - if (datagrams != 0) { - /* - * We may send less entries than requested (vlen) if the - * sock is non blocking... - */ - if (err != -EAGAIN) { - /* - * ... or if sendmsg returns an error after we - * send some datagrams, where we record the - * error to return on the next call or if the - * app asks about it using getsockopt(SO_ERROR). - */ - sock->sk->sk_err = -err; - } - + /* We only return an error if no datagrams were able to be sent */ + if (datagrams != 0) return datagrams; - } return err; } -- cgit v1.2.3 From 98382f419f32d2c12d021943b87dea555677144b Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Thu, 4 Aug 2011 14:07:39 +0000 Subject: net: Cap number of elements for sendmmsg To limit the amount of time we can spend in sendmmsg, cap the number of elements to UIO_MAXIOV (currently 1024). For error handling an application using sendmmsg needs to retry at the first unsent message, so capping is simpler and requires less application logic than returning EINVAL. Signed-off-by: Anton Blanchard Cc: stable [3.0+] Signed-off-by: David S. Miller --- net/socket.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/socket.c b/net/socket.c index e4ed2359eb4..b5c6de4f268 100644 --- a/net/socket.c +++ b/net/socket.c @@ -1999,6 +1999,9 @@ int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, struct compat_mmsghdr __user *compat_entry; struct msghdr msg_sys; + if (vlen > UIO_MAXIOV) + vlen = UIO_MAXIOV; + datagrams = 0; sock = sockfd_lookup_light(fd, &err, &fput_needed); -- cgit v1.2.3 From c71d8ebe7a4496fb7231151cb70a6baa0cb56f9a Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Thu, 4 Aug 2011 14:07:40 +0000 Subject: net: Fix security_socket_sendmsg() bypass problem. The sendmmsg() introduced by commit 228e548e "net: Add sendmmsg socket system call" is capable of sending to multiple different destination addresses. SMACK is using destination's address for checking sendmsg() permission. However, security_socket_sendmsg() is called for only once even if multiple different destination addresses are passed to sendmmsg(). Therefore, we need to call security_socket_sendmsg() for each destination address rather than only the first destination address. Since calling security_socket_sendmsg() every time when only single destination address was passed to sendmmsg() is a waste of time, omit calling security_socket_sendmsg() unless destination address of previous datagram and that of current datagram differs. Signed-off-by: Tetsuo Handa Acked-by: Anton Blanchard Cc: stable [3.0+] Signed-off-by: David S. Miller --- net/socket.c | 43 ++++++++++++++++++++++++++++++++++--------- 1 file changed, 34 insertions(+), 9 deletions(-) diff --git a/net/socket.c b/net/socket.c index b5c6de4f268..24a77400b65 100644 --- a/net/socket.c +++ b/net/socket.c @@ -1871,8 +1871,14 @@ SYSCALL_DEFINE2(shutdown, int, fd, int, how) #define COMPAT_NAMELEN(msg) COMPAT_MSG(msg, msg_namelen) #define COMPAT_FLAGS(msg) COMPAT_MSG(msg, msg_flags) +struct used_address { + struct sockaddr_storage name; + unsigned int name_len; +}; + static int __sys_sendmsg(struct socket *sock, struct msghdr __user *msg, - struct msghdr *msg_sys, unsigned flags, int nosec) + struct msghdr *msg_sys, unsigned flags, + struct used_address *used_address) { struct compat_msghdr __user *msg_compat = (struct compat_msghdr __user *)msg; @@ -1953,8 +1959,28 @@ static int __sys_sendmsg(struct socket *sock, struct msghdr __user *msg, if (sock->file->f_flags & O_NONBLOCK) msg_sys->msg_flags |= MSG_DONTWAIT; - err = (nosec ? sock_sendmsg_nosec : sock_sendmsg)(sock, msg_sys, - total_len); + /* + * If this is sendmmsg() and current destination address is same as + * previously succeeded address, omit asking LSM's decision. + * used_address->name_len is initialized to UINT_MAX so that the first + * destination address never matches. + */ + if (used_address && used_address->name_len == msg_sys->msg_namelen && + !memcmp(&used_address->name, msg->msg_name, + used_address->name_len)) { + err = sock_sendmsg_nosec(sock, msg_sys, total_len); + goto out_freectl; + } + err = sock_sendmsg(sock, msg_sys, total_len); + /* + * If this is sendmmsg() and sending to current destination address was + * successful, remember it. + */ + if (used_address && err >= 0) { + used_address->name_len = msg_sys->msg_namelen; + memcpy(&used_address->name, msg->msg_name, + used_address->name_len); + } out_freectl: if (ctl_buf != ctl) @@ -1979,7 +2005,7 @@ SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned, flags) if (!sock) goto out; - err = __sys_sendmsg(sock, msg, &msg_sys, flags, 0); + err = __sys_sendmsg(sock, msg, &msg_sys, flags, NULL); fput_light(sock->file, fput_needed); out: @@ -1998,6 +2024,7 @@ int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, struct mmsghdr __user *entry; struct compat_mmsghdr __user *compat_entry; struct msghdr msg_sys; + struct used_address used_address; if (vlen > UIO_MAXIOV) vlen = UIO_MAXIOV; @@ -2008,24 +2035,22 @@ int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, if (!sock) return err; + used_address.name_len = UINT_MAX; entry = mmsg; compat_entry = (struct compat_mmsghdr __user *)mmsg; err = 0; while (datagrams < vlen) { - /* - * No need to ask LSM for more than the first datagram. - */ if (MSG_CMSG_COMPAT & flags) { err = __sys_sendmsg(sock, (struct msghdr __user *)compat_entry, - &msg_sys, flags, datagrams); + &msg_sys, flags, &used_address); if (err < 0) break; err = __put_user(err, &compat_entry->msg_len); ++compat_entry; } else { err = __sys_sendmsg(sock, (struct msghdr __user *)entry, - &msg_sys, flags, datagrams); + &msg_sys, flags, &used_address); if (err < 0) break; err = put_user(err, &entry->msg_len); -- cgit v1.2.3 From 20e72a44098641f0c4de34a31287a93e006afb5b Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Thu, 4 Aug 2011 01:05:12 +0000 Subject: mlx4: decreasing ref count when removing mac For older FW versions, when a Mac address removed from Mac table, we should set 0 for reference count for the corresponding Mac index. Fixes a bug where removing Mac from the table still left that entry as invalid. Signed-off-by: Yevgeny Petrilin Tested-by: Roland Dreier Signed-off-by: David S. Miller --- drivers/net/mlx4/port.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/mlx4/port.c b/drivers/net/mlx4/port.c index 1f95afda684..609e0ec14ce 100644 --- a/drivers/net/mlx4/port.c +++ b/drivers/net/mlx4/port.c @@ -258,9 +258,12 @@ void mlx4_unregister_mac(struct mlx4_dev *dev, u8 port, int qpn) if (validate_index(dev, table, index)) goto out; - table->entries[index] = 0; - mlx4_set_port_mac_table(dev, port, table->entries); - --table->total; + /* Check whether this address has reference count */ + if (!(--table->refs[index])) { + table->entries[index] = 0; + mlx4_set_port_mac_table(dev, port, table->entries); + --table->total; + } out: mutex_unlock(&table->mutex); } -- cgit v1.2.3 From c15fea2d8ca834dae491339c47e4fb3c81428190 Mon Sep 17 00:00:00 2001 From: Max Matveev Date: Fri, 5 Aug 2011 03:56:30 -0700 Subject: ipv6: check for IPv4 mapped addresses when connecting IPv6 sockets When support for binding to 'mapped INADDR_ANY (::ffff.0.0.0.0)' was added in 0f8d3c7ac3693d7b6c731bf2159273a59bf70e12 the rest of the code wasn't told so now it's possible to bind IPv6 datagram socket to ::ffff.0.0.0.0, connect it to another IPv4 address and it will all work except for getsockhame() which does not return the local address as expected. To give getsockname() something to work with check for 'mapped INADDR_ANY' when connecting and update the in-core source addresses appropriately. Signed-off-by: Max Matveev Signed-off-by: David S. Miller --- net/ipv6/datagram.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index 16560336eb7..9ef1831746e 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -33,6 +33,11 @@ #include #include +static inline int ipv6_mapped_addr_any(const struct in6_addr *a) +{ + return (ipv6_addr_v4mapped(a) && (a->s6_addr32[3] == 0)); +} + int ip6_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len) { struct sockaddr_in6 *usin = (struct sockaddr_in6 *) uaddr; @@ -102,10 +107,12 @@ ipv4_connected: ipv6_addr_set_v4mapped(inet->inet_daddr, &np->daddr); - if (ipv6_addr_any(&np->saddr)) + if (ipv6_addr_any(&np->saddr) || + ipv6_mapped_addr_any(&np->saddr)) ipv6_addr_set_v4mapped(inet->inet_saddr, &np->saddr); - if (ipv6_addr_any(&np->rcv_saddr)) { + if (ipv6_addr_any(&np->rcv_saddr) || + ipv6_mapped_addr_any(&np->rcv_saddr)) { ipv6_addr_set_v4mapped(inet->inet_rcv_saddr, &np->rcv_saddr); if (sk->sk_prot->rehash) -- cgit v1.2.3