From e08f626b33eb636dbf38b21618ab32b7fd8e1ec4 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 20 Feb 2013 03:06:34 +0000 Subject: e1000e: workaround DMA unit hang on I218 At 1000Mbps link speed, one of the MAC's internal clocks can be stopped for up to 4us when entering K1 (a power mode of the MAC-PHY interconnect). If the MAC is waiting for completion indications for 2 DMA write requests into Host memory (e.g. descriptor writeback or Rx packet writing) and the indications occur while the clock is stopped, both indications will be missed by the MAC causing the MAC to wait for the completion indications and be unable to generate further DMA write requests. This results in an apparent hardware hang. Work-around the issue by disabling the de-assertion of the clock request when 1000Mbps link is acquired (K1 must be disabled while doing this). Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/ich8lan.c | 71 ++++++++++++++++++++++++++++- drivers/net/ethernet/intel/e1000e/ich8lan.h | 2 + drivers/net/ethernet/intel/e1000e/regs.h | 1 + 3 files changed, 73 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index dff7bff8b8e..121a865c7fb 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -781,6 +781,59 @@ release: return ret_val; } +/** + * e1000_k1_workaround_lpt_lp - K1 workaround on Lynxpoint-LP + * @hw: pointer to the HW structure + * @link: link up bool flag + * + * When K1 is enabled for 1Gbps, the MAC can miss 2 DMA completion indications + * preventing further DMA write requests. Workaround the issue by disabling + * the de-assertion of the clock request when in 1Gpbs mode. + **/ +static s32 e1000_k1_workaround_lpt_lp(struct e1000_hw *hw, bool link) +{ + u32 fextnvm6 = er32(FEXTNVM6); + s32 ret_val = 0; + + if (link && (er32(STATUS) & E1000_STATUS_SPEED_1000)) { + u16 kmrn_reg; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = + e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG, + &kmrn_reg); + if (ret_val) + goto release; + + ret_val = + e1000e_write_kmrn_reg_locked(hw, + E1000_KMRNCTRLSTA_K1_CONFIG, + kmrn_reg & + ~E1000_KMRNCTRLSTA_K1_ENABLE); + if (ret_val) + goto release; + + usleep_range(10, 20); + + ew32(FEXTNVM6, fextnvm6 | E1000_FEXTNVM6_REQ_PLL_CLK); + + ret_val = + e1000e_write_kmrn_reg_locked(hw, + E1000_KMRNCTRLSTA_K1_CONFIG, + kmrn_reg); +release: + hw->phy.ops.release(hw); + } else { + /* clear FEXTNVM6 bit 8 on link down or 10/100 */ + ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK); + } + + return ret_val; +} + /** * e1000_check_for_copper_link_ich8lan - Check for link (Copper) * @hw: pointer to the HW structure @@ -818,6 +871,14 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) return ret_val; } + /* Work-around I218 hang issue */ + if ((hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_LM) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V)) { + ret_val = e1000_k1_workaround_lpt_lp(hw, link); + if (ret_val) + return ret_val; + } + /* Clear link partner's EEE ability */ hw->dev_spec.ich8lan.eee_lp_ability = 0; @@ -3954,8 +4015,16 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) phy_ctrl = er32(PHY_CTRL); phy_ctrl |= E1000_PHY_CTRL_GBE_DISABLE; + if (hw->phy.type == e1000_phy_i217) { - u16 phy_reg; + u16 phy_reg, device_id = hw->adapter->pdev->device; + + if ((device_id == E1000_DEV_ID_PCH_LPTLP_I218_LM) || + (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V)) { + u32 fextnvm6 = er32(FEXTNVM6); + + ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK); + } ret_val = hw->phy.ops.acquire(hw); if (ret_val) diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h index b6d3174d7d2..8bf4655c2e1 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.h +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h @@ -92,6 +92,8 @@ #define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7 #define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3 +#define E1000_FEXTNVM6_REQ_PLL_CLK 0x00000100 + #define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL #define E1000_ICH_RAR_ENTRIES 7 diff --git a/drivers/net/ethernet/intel/e1000e/regs.h b/drivers/net/ethernet/intel/e1000e/regs.h index 794fe149766..a7e6a3e3725 100644 --- a/drivers/net/ethernet/intel/e1000e/regs.h +++ b/drivers/net/ethernet/intel/e1000e/regs.h @@ -42,6 +42,7 @@ #define E1000_FEXTNVM 0x00028 /* Future Extended NVM - RW */ #define E1000_FEXTNVM3 0x0003C /* Future Extended NVM 3 - RW */ #define E1000_FEXTNVM4 0x00024 /* Future Extended NVM 4 - RW */ +#define E1000_FEXTNVM6 0x00010 /* Future Extended NVM 6 - RW */ #define E1000_FEXTNVM7 0x000E4 /* Future Extended NVM 7 - RW */ #define E1000_FCT 0x00030 /* Flow Control Type - RW */ #define E1000_VET 0x00038 /* VLAN Ether Type - RW */ -- cgit v1.2.3 From e4f7dbb17e797d922d72567f37de3735722034ba Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Thu, 21 Feb 2013 03:08:50 +0000 Subject: igb: Drop BUILD_BUG_ON check from igb_build_rx_buffer On s390 the igb driver was throwing a build error due to the fact that a frame built using build_skb would be larger than 2K. Since this is not likely to change at any point in the future we are better off just dropping the check since we already had a check in igb_set_rx_buffer_len that will just disable the usage of build_skb anyway. Signed-off-by: Alexander Duyck Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_main.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index ed79a1c53b5..4d53a17959f 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -6227,13 +6227,6 @@ static struct sk_buff *igb_build_rx_buffer(struct igb_ring *rx_ring, /* If we spanned a buffer we have a huge mess so test for it */ BUG_ON(unlikely(!igb_test_staterr(rx_desc, E1000_RXD_STAT_EOP))); - /* Guarantee this function can be used by verifying buffer sizes */ - BUILD_BUG_ON(SKB_WITH_OVERHEAD(IGB_RX_BUFSZ) < (NET_SKB_PAD + - NET_IP_ALIGN + - IGB_TS_HDR_LEN + - ETH_FRAME_LEN + - ETH_FCS_LEN)); - rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean]; page = rx_buffer->page; prefetchw(page); -- cgit v1.2.3 From ed65bdd8c0086d69948e6380dba0cc279a6906de Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Wed, 6 Feb 2013 03:35:27 +0000 Subject: igb: Fix link setup for I210 devices This patch changes the setup copper link function to use a switch statement for the PHY id's available for the given PHY types. It also adds a case for the I210 PHY id, so the appropriate setup link function is called for it. Signed-off-by: Carolyn Wyborny Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/e1000_82575.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c index 84e7e0909de..b64542acfa3 100644 --- a/drivers/net/ethernet/intel/igb/e1000_82575.c +++ b/drivers/net/ethernet/intel/igb/e1000_82575.c @@ -1361,11 +1361,16 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) switch (hw->phy.type) { case e1000_phy_i210: case e1000_phy_m88: - if (hw->phy.id == I347AT4_E_PHY_ID || - hw->phy.id == M88E1112_E_PHY_ID) + switch (hw->phy.id) { + case I347AT4_E_PHY_ID: + case M88E1112_E_PHY_ID: + case I210_I_PHY_ID: ret_val = igb_copper_link_setup_m88_gen2(hw); - else + break; + default: ret_val = igb_copper_link_setup_m88(hw); + break; + } break; case e1000_phy_igp_3: ret_val = igb_copper_link_setup_igp(hw); -- cgit v1.2.3 From 603e86fa39cd48edba5ee8a4d19637bd41e2a8bf Mon Sep 17 00:00:00 2001 From: Carolyn Wyborny Date: Wed, 20 Feb 2013 07:40:55 +0000 Subject: igb: Fix for lockdep issue in igb_get_i2c_client This patch fixes a lockdep warning in igb_get_i2c_client by refactoring the initialization and usage of the i2c_client completely. There is no on the fly allocation of the single client needed today. Signed-off-by: Carolyn Wyborny Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb.h | 2 +- drivers/net/ethernet/intel/igb/igb_hwmon.c | 14 ++++++ drivers/net/ethernet/intel/igb/igb_main.c | 69 +----------------------------- 3 files changed, 17 insertions(+), 68 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h index d27edbc6392..25151401c2a 100644 --- a/drivers/net/ethernet/intel/igb/igb.h +++ b/drivers/net/ethernet/intel/igb/igb.h @@ -447,7 +447,7 @@ struct igb_adapter { #endif struct i2c_algo_bit_data i2c_algo; struct i2c_adapter i2c_adap; - struct igb_i2c_client_list *i2c_clients; + struct i2c_client *i2c_client; }; #define IGB_FLAG_HAS_MSI (1 << 0) diff --git a/drivers/net/ethernet/intel/igb/igb_hwmon.c b/drivers/net/ethernet/intel/igb/igb_hwmon.c index 0a9b073d0b0..4623502054d 100644 --- a/drivers/net/ethernet/intel/igb/igb_hwmon.c +++ b/drivers/net/ethernet/intel/igb/igb_hwmon.c @@ -39,6 +39,10 @@ #include #ifdef CONFIG_IGB_HWMON +struct i2c_board_info i350_sensor_info = { + I2C_BOARD_INFO("i350bb", (0Xf8 >> 1)), +}; + /* hwmon callback functions */ static ssize_t igb_hwmon_show_location(struct device *dev, struct device_attribute *attr, @@ -188,6 +192,7 @@ int igb_sysfs_init(struct igb_adapter *adapter) unsigned int i; int n_attrs; int rc = 0; + struct i2c_client *client = NULL; /* If this method isn't defined we don't support thermals */ if (adapter->hw.mac.ops.init_thermal_sensor_thresh == NULL) @@ -198,6 +203,15 @@ int igb_sysfs_init(struct igb_adapter *adapter) if (rc) goto exit; + /* init i2c_client */ + client = i2c_new_device(&adapter->i2c_adap, &i350_sensor_info); + if (client == NULL) { + dev_info(&adapter->pdev->dev, + "Failed to create new i2c device..\n"); + goto exit; + } + adapter->i2c_client = client; + /* Allocation space for max attributes * max num sensors * values (loc, temp, max, caution) */ diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 4d53a17959f..4dbd62968c7 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -1923,10 +1923,6 @@ void igb_set_fw_version(struct igb_adapter *adapter) return; } -static const struct i2c_board_info i350_sensor_info = { - I2C_BOARD_INFO("i350bb", 0Xf8), -}; - /* igb_init_i2c - Init I2C interface * @adapter: pointer to adapter structure * @@ -7717,67 +7713,6 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba) } } -static DEFINE_SPINLOCK(i2c_clients_lock); - -/* igb_get_i2c_client - returns matching client - * in adapters's client list. - * @adapter: adapter struct - * @dev_addr: device address of i2c needed. - */ -static struct i2c_client * -igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr) -{ - ulong flags; - struct igb_i2c_client_list *client_list; - struct i2c_client *client = NULL; - struct i2c_board_info client_info = { - I2C_BOARD_INFO("igb", 0x00), - }; - - spin_lock_irqsave(&i2c_clients_lock, flags); - client_list = adapter->i2c_clients; - - /* See if we already have an i2c_client */ - while (client_list) { - if (client_list->client->addr == (dev_addr >> 1)) { - client = client_list->client; - goto exit; - } else { - client_list = client_list->next; - } - } - - /* no client_list found, create a new one */ - client_list = kzalloc(sizeof(*client_list), GFP_ATOMIC); - if (client_list == NULL) - goto exit; - - /* dev_addr passed to us is left-shifted by 1 bit - * i2c_new_device call expects it to be flush to the right. - */ - client_info.addr = dev_addr >> 1; - client_info.platform_data = adapter; - client_list->client = i2c_new_device(&adapter->i2c_adap, &client_info); - if (client_list->client == NULL) { - dev_info(&adapter->pdev->dev, - "Failed to create new i2c device..\n"); - goto err_no_client; - } - - /* insert new client at head of list */ - client_list->next = adapter->i2c_clients; - adapter->i2c_clients = client_list; - - client = client_list->client; - goto exit; - -err_no_client: - kfree(client_list); -exit: - spin_unlock_irqrestore(&i2c_clients_lock, flags); - return client; -} - /* igb_read_i2c_byte - Reads 8 bit word over I2C * @hw: pointer to hardware structure * @byte_offset: byte offset to read @@ -7791,7 +7726,7 @@ s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset, u8 dev_addr, u8 *data) { struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw); - struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr); + struct i2c_client *this_client = adapter->i2c_client; s32 status; u16 swfw_mask = 0; @@ -7828,7 +7763,7 @@ s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset, u8 dev_addr, u8 data) { struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw); - struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr); + struct i2c_client *this_client = adapter->i2c_client; s32 status; u16 swfw_mask = E1000_SWFW_PHY0_SM; -- cgit v1.2.3