| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Also remove -Wextra because gcc-4.6 emits lots of irritating
signed/unsigned comparison warnings.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Revert commit 03a7beb55b9f ("epoll: support for disabling items, and a
self-test app") pending resolution of the issues identified by Michael
Kerrisk, copied below.
We'll revisit this for 3.8.
: I've taken a look at this patch as it currently stands in 3.7-rc1, and
: done a bit of testing. (By the way, the test program
: tools/testing/selftests/epoll/test_epoll.c does not compile...)
:
: There are one or two places where the behavior seems a little strange,
: so I have a question or two at the end of this mail. But other than
: that, I want to check my understanding so that the interface can be
: correctly documented.
:
: Just to go though my understanding, the problem is the following
: scenario in a multithreaded application:
:
: 1. Multiple threads are performing epoll_wait() operations,
: and maintaining a user-space cache that contains information
: corresponding to each file descriptor being monitored by
: epoll_wait().
:
: 2. At some point, a thread wants to delete (EPOLL_CTL_DEL)
: a file descriptor from the epoll interest list, and
: delete the corresponding record from the user-space cache.
:
: 3. The problem with (2) is that some other thread may have
: previously done an epoll_wait() that retrieved information
: about the fd in question, and may be in the middle of using
: information in the cache that relates to that fd. Thus,
: there is a potential race.
:
: 4. The race can't solved purely in user space, because doing
: so would require applying a mutex across the epoll_wait()
: call, which would of course blow thread concurrency.
:
: Right?
:
: Your solution is the EPOLL_CTL_DISABLE operation. I want to
: confirm my understanding about how to use this flag, since
: the description that has accompanied the patches so far
: has been a bit sparse
:
: 0. In the scenario you're concerned about, deleting a file
: descriptor means (safely) doing the following:
: (a) Deleting the file descriptor from the epoll interest list
: using EPOLL_CTL_DEL
: (b) Deleting the corresponding record in the user-space cache
:
: 1. It's only meaningful to use this EPOLL_CTL_DISABLE in
: conjunction with EPOLLONESHOT.
:
: 2. Using EPOLL_CTL_DISABLE without using EPOLLONESHOT in
: conjunction is a logical error.
:
: 3. The correct way to code multithreaded applications using
: EPOLL_CTL_DISABLE and EPOLLONESHOT is as follows:
:
: a. All EPOLL_CTL_ADD and EPOLL_CTL_MOD operations should
: should EPOLLONESHOT.
:
: b. When a thread wants to delete a file descriptor, it
: should do the following:
:
: [1] Call epoll_ctl(EPOLL_CTL_DISABLE)
: [2] If the return status from epoll_ctl(EPOLL_CTL_DISABLE)
: was zero, then the file descriptor can be safely
: deleted by the thread that made this call.
: [3] If the epoll_ctl(EPOLL_CTL_DISABLE) fails with EBUSY,
: then the descriptor is in use. In this case, the calling
: thread should set a flag in the user-space cache to
: indicate that the thread that is using the descriptor
: should perform the deletion operation.
:
: Is all of the above correct?
:
: The implementation depends on checking on whether
: (events & ~EP_PRIVATE_BITS) == 0
: This replies on the fact that EPOLL_CTL_AD and EPOLL_CTL_MOD always
: set EPOLLHUP and EPOLLERR in the 'events' mask, and EPOLLONESHOT
: causes those flags (as well as all others in ~EP_PRIVATE_BITS) to be
: cleared.
:
: A corollary to the previous paragraph is that using EPOLL_CTL_DISABLE
: is only useful in conjunction with EPOLLONESHOT. However, as things
: stand, one can use EPOLL_CTL_DISABLE on a file descriptor that does
: not have EPOLLONESHOT set in 'events' This results in the following
: (slightly surprising) behavior:
:
: (a) The first call to epoll_ctl(EPOLL_CTL_DISABLE) returns 0
: (the indicator that the file descriptor can be safely deleted).
: (b) The next call to epoll_ctl(EPOLL_CTL_DISABLE) fails with EBUSY.
:
: This doesn't seem particularly useful, and in fact is probably an
: indication that the user made a logic error: they should only be using
: epoll_ctl(EPOLL_CTL_DISABLE) on a file descriptor for which
: EPOLLONESHOT was set in 'events'. If that is correct, then would it
: not make sense to return an error to user space for this case?
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: "Paton J. Lewis" <palewis@adobe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest confusion fix from Steven Rostedt:
"With the v3.7-rc2 kernel, the network cards on my target boxes were
not being brought up.
I found that the modules for the network was not being installed.
This was due to the config CONFIG_MODULES_USE_ELF_RELA that came
before CONFIG_MODULES, and confused ktest in thinking that
CONFIG_MODULES=y was not found.
Ktest needs to test all configs and not just stop if something starts
with CONFIG_MODULES."
* tag 'ktest-v3.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Fix ktest confusion with CONFIG_MODULES_USE_ELF_RELA
|
|
In order to decide if ktest should bother installing modules on the
target box, it checks if the config file has CONFIG_MODULES=y. But it
also checks if the '=y' part exists. It only will install modules if the
config exists and is set with '=y'. But as the regex that was used
tests:
/^CONFIG_MODULES(=y)?/
this will also match:
CONFIG_MODULES_USE_ELF_RELA
as the '=y' part was optional and it did not test the rest of the line.
When this happens, ktest will stop checking the rest of the configs but
it will also think that no modules are needed to be installed. What it
should do is only jump out of the loop if it actually found a
CONFIG_MODULES that is set to true.
Otherwise, ktest wont install the necessary modules needed for proper
booting of the test target.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Latest Linus head run of "make selftests" in the tools directory failed
with references to undefined variables. Reference was to
'write_thread_data' which is the name of a struct that is being used, not
the variable itself. Change reference so it points to the variable.
Signed-off-by: Daniel Hazelton <dshadowwolf@gmail.com>
Cc: "Paton J. Lewis" <palewis@adobe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig changes from Michal Marek:
"kconfig in v3.7 is going to
- initialize ncurses only once in menuconfig
- be able to jump to a search result in menuconfig
- change the misnomer oldnoconfig to a more meaningful name
olddefconfig, keeping the old name as alias"
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kconfig: replace 'oldnoconfig' with 'olddefconfig', and keep the old name as an alias
menuconfig: Assign jump keys per-page instead of globally
menuconfig: Do not open code textbox scroll up/down
menuconfig: Add jump keys to search results
menuconfig: Extend dialog_textbox so that it can return to a scrolled position
menuconfig: Extend dialog_textbox so that it can exit on arbitrary keypresses
menuconfig: Remove superfluous conditionnal
kconfig: document oldnoconfig to what it really does in conf.c
kconfig/mconf.c: revision of curses initialization.
|
|
Enhanced epoll_ctl to support EPOLL_CTL_DISABLE, which disables an epoll
item. If epoll_ctl doesn't return -EBUSY in this case, it is then safe to
delete the epoll item in a multi-threaded environment. Also added a new
test_epoll self- test app to both demonstrate the need for this feature
and test it.
Signed-off-by: Paton J. Lewis <palewis@adobe.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Paul Holland <pholland@adobe.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest fix from Steven Rostedt:
"ktest has one fix needed for this merge window - fix parsing of ELSE
IF in reading config file"
* tag 'ktest-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Fix ELSE IF statements
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull the trivial tree from Jiri Kosina:
"Tiny usual fixes all over the place"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
doc: fix old config name of kprobetrace
fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc
btrfs: fix the commment for the action flags in delayed-ref.h
btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID
vfs: fix kerneldoc for generic_fh_to_parent()
treewide: fix comment/printk/variable typos
ipr: fix small coding style issues
doc: fix broken utf8 encoding
nfs: comment fix
platform/x86: fix asus_laptop.wled_type module parameter
mfd: printk/comment fixes
doc: getdelays.c: remember to close() socket on error in create_nl_socket()
doc: aliasing-test: close fd on write error
mmc: fix comment typos
dma: fix comments
spi: fix comment/printk typos in spi
Coccinelle: fix typo in memdup_user.cocci
tmiofb: missing NULL pointer checks
tools: perf: Fix typo in tools/perf
tools/testing: fix comment / output typos
...
|
|
an alias
As 67d34a6a391369269a2e5dba8a5f42cc4cd50231 said, 'oldnoconfig' doesn't
set new symbols to 'n', but instead sets it to their default values.
So, this patch replaces 'oldnoconfig' with 'olddefconfig', stop making
people confused, and keep the old name 'oldnoconfig' as an alias,
because people already are dependent on its behavior with the
counter-intuitive name.
Signed-off-by: Adam Lee <adam8157@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
The ELSE IF statements do not work as expected if another ELSE statement
follows. This is because the $if_set is not set. If the ELSE IF
condition is true, the following ELSE should be ignored. But because the
$if_set is not set, the following ELSE will also be executed.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Correct spelling typo in tools/testing
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
"fault-injection: add tool to run command with failslab or
fail_page_alloc" added tools/testing/fault-injection/failcmd.sh to make it
easier to inject slab/page allocation failures by fault injection.
failcmd.sh prints the following warning when running with arguments
for command.
# ./failcmd.sh echo aaa
failcmd.sh: line 209: [: echo: binary operator expected
aaa
This warning is caused by an improper check whether at least one
parameter is left after parsing command options.
Fix it by testing the length of $1 instead of $@
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge Andrew's first set of patches:
"Non-MM patches:
- lots of misc bits
- tree-wide have_clk() cleanups
- quite a lot of printk tweaks. I draw your attention to "printk:
convert the format for KERN_<LEVEL> to a 2 byte pattern" which
looks a bit scary. But afaict it's solid.
- backlight updates
- lib/ feature work (notably the addition and use of memweight())
- checkpatch updates
- rtc updates
- nilfs updates
- fatfs updates (partial, still waiting for acks)
- kdump, proc, fork, IPC, sysctl, taskstats, pps, etc
- new fault-injection feature work"
* Merge emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits)
drivers/misc/lkdtm.c: fix missing allocation failure check
lib/scatterlist: do not re-write gfp_flags in __sg_alloc_table()
fault-injection: add tool to run command with failslab or fail_page_alloc
fault-injection: add selftests for cpu and memory hotplug
powerpc: pSeries reconfig notifier error injection module
memory: memory notifier error injection module
PM: PM notifier error injection module
cpu: rewrite cpu-notifier-error-inject module
fault-injection: notifier error injection
c/r: fcntl: add F_GETOWNER_UIDS option
resource: make sure requested range is included in the root range
include/linux/aio.h: cpp->C conversions
fs: cachefiles: add support for large files in filesystem caching
pps: return PTR_ERR on error in device_create
taskstats: check nla_reserve() return
sysctl: suppress kmemleak messages
ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION
ipc: compat: use signed size_t types for msgsnd and msgrcv
ipc: allow compat IPC version field parsing if !ARCH_WANT_OLD_COMPAT_IPC
ipc: add COMPAT_SHMLBA support
...
|
|
This adds tools/testing/fault-injection/failcmd.sh to run a command while
injecting slab/page allocation failures via fault injection.
Example:
Run a command "make -C tools/testing/selftests/ run_tests" with
injecting slab allocation failure.
# ./tools/testing/fault-injection/failcmd.sh \
-- make -C tools/testing/selftests/ run_tests
Same as above except to specify 100 times failures at most instead of
one time at most by default.
# ./tools/testing/fault-injection/failcmd.sh --times=100 \
-- make -C tools/testing/selftests/ run_tests
Same as above except to inject page allocation failure instead of slab
allocation failure.
# env FAILCMD_TYPE=fail_page_alloc \
./tools/testing/fault-injection/failcmd.sh --times=100 \
-- make -C tools/testing/selftests/ run_tests
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This adds two selftests
* tools/testing/selftests/cpu-hotplug/on-off-test.sh is testing script
for CPU hotplug
1. Online all hot-pluggable CPUs
2. Offline all hot-pluggable CPUs
3. Online all hot-pluggable CPUs again
4. Exit if cpu-notifier-error-inject.ko is not available
5. Offline all hot-pluggable CPUs in preparation for testing
6. Test CPU hot-add error handling by injecting notifier errors
7. Online all hot-pluggable CPUs in preparation for testing
8. Test CPU hot-remove error handling by injecting notifier errors
* tools/testing/selftests/memory-hotplug/on-off-test.sh is doing the
similar thing for memory hotplug.
1. Online all hot-pluggable memory
2. Offline 10% of hot-pluggable memory
3. Online all hot-pluggable memory again
4. Exit if memory-notifier-error-inject.ko is not available
5. Offline 10% of hot-pluggable memory in preparation for testing
6. Test memory hot-add error handling by injecting notifier errors
7. Online all hot-pluggable memory in preparation for testing
8. Test memory hot-remove error handling by injecting notifier errors
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add '=~' and '!~' to the list of allowed conditionals for DEFAULT and
TEST_START section if statements.
ie.
TEST_START IF TEST =~ .*test$
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The option IGNORE_ERRORS is used to allow a test to succeed even if a
warning appears from the kernel. Sometimes kernels will produce warnings
that are not associated with a test, and the user wants to test
something else.
The IGNORE_ERRORS works for boot up, but was not preventing test runs to
succeed if the kernel produced a warning.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The min configs are saved in a perl hash called force_configs, and this
hash is used to add configs to the .config file. But it was not being
reset between tests and a min config from a previous test would affect
the min config of the next test causing undesirable results.
Reset the force_config hash at the start of each test.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Usually the target is booted into a dependable kernel when a test
starts. The test will install the test kernel and reboot the box. But
there may be a time that the kernel is running an unreliable kernel and
the reboot may crash.
Have ktest detect crashes on a reboot and force a power-cycle instead.
This can usually happen if a test kernel was installed to run manual
tests, but the user forgot to reboot to the known good kernel.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
If the console is constantly outputting content, this can cause ktest
to get stuck waiting on the monitor to settle down.
The option MAX_MONITOR_WAIT is the maximum time (in seconds) for ktest
to wait for the console to flush.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
With a name like 'oldnoconfig' one may think that the config generated
would disable all configs that were not defined (selecting "no" for all
options). But this is not the case. It selects the default. If a config
has a 'default y', then it is added if not specified.
This broke the config bisect, because options not specified by a config
will just use the default, where it expected to turn off. This caused an
option to be enabled that disabled an option that would break the build.
The end result was that we never found the bad config at the end of the
test.
Instead of using 'make oldnoconfig', ktest now builds the options it
expects enabled and disabled. When it turns off an option, it will no
longer remove it, but actually set it to:
# CONFIG_FOO is not set.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The config-bisect can take a bad config and bisect it down to find out
what config actually breaks the config. But as all tests will apply a
minconfig (defined by a user) to apply before booting, it is possible
that the minconfig could actually make the bad config work (minconfigs
can disable configs). The end result is that the config bisect test will
not find a config that breaks. This can be rather frustrating to the
user.
The CONFIG_BISECT_CHECK option, when set to 1, will make sure that the
bad config (with the minconfig applied) still fails before trying to
bisect.
And yes, I did get burned by this.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Add the PRE_INSTALL option that will allow a user to specify a shell
command to be executed before the install operation executes.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
In order to let the user add commands before and after ktest runs, the
PRE_KTEST and POST_KTEST options are defined. They hold shell commands
that will execute befor ktest runs its first test, as well as when it
completed its last test.
The PRE_TEST and POST_TEST will be run befor and after (respectively)
for a given test. They can either be global (done for all tests) or
defined by a single test.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
A debug 'exit' was left in ktest.pl. Remove it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
While doing the checkpoint-restore in the user space one need to determine
whether various kernel objects (like mm_struct-s of file_struct-s) are
shared between tasks and restore this state.
The 2nd step can be solved by using appropriate CLONE_ flags and the
unshare syscall, while there's currently no ways for solving the 1st one.
One of the ways for checking whether two tasks share e.g. mm_struct is to
provide some mm_struct ID of a task to its proc file, but showing such
info considered to be not that good for security reasons.
Thus after some debates we end up in conclusion that using that named
'comparison' syscall might be the best candidate. So here is it --
__NR_kcmp.
It takes up to 5 arguments - the pids of the two tasks (which
characteristics should be compared), the comparison type and (in case of
comparison of files) two file descriptors.
Lookups for pids are done in the caller's PID namespace only.
At moment only x86 is supported and tested.
[akpm@linux-foundation.org: fix up selftests, warnings]
[akpm@linux-foundation.org: include errno.h]
[akpm@linux-foundation.org: tweak comment text]
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Valdis.Kletnieks@vt.edu
Cc: Michal Marek <mmarek@suse.cz>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add the mq_perf_tests tool I used when creating my mq performance patch.
Also add a local .gitignore to keep the binaries from showing up in git
status output.
[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Doug Ledford <dledford@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a directory to house POSIX message queue subsystem specific tests.
Add first test which checks the operation of mq_open() under various
corner conditions.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Joe Korty <joe.korty@ccur.com>
Cc: Amerigo Wang <amwang@redhat.com>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Add a README that explains what the different example configs in the
ktest example directory are about.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
I used the snowball.conf in a live demo that demonstrated how to use
ktest.pl with a snowball ARM board. I've been asked to included that
config in the ktest repository.
Here it is.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Add the config that I use to test several archs. I downloaded several
cross compilers from:
http://kernel.org/pub/tools/crosstool/files/bin/x86_64/
and this config is an example to crosscompile several archs to make sure
that your changes do not break archs that you are not working on.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Add an example config that explains how to use ktest with a virtual
guest as the target.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
I've been asked several times to provide more useful example configs for
ktest.pl, as the sample.conf is too complex (because it explains all
configs). This adds configs broken up by use case, and these configs are
based on actual configs that I use on a daily basis.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
If the file that OUTPUT_MIN_CONFIG exists then ktest.pl will prompt the
user and ask them if the OUTPUT_MIN_CONFIG should be used as the
starting point for make_min_config instead of MIN_CONFIG.
This is usually the case, and to allow the user to do so, which is
helpful if the user is creating different min configs based on tests,
and they know one is a superset of another test, they can set
USE_OUTPUT_MIN_CONFIG to one, which will prevent kest.pl from prompting
to use the OUTPUT_MIN_CONFIG and it will just use it.
If USE_OUTPUT_MIN_CONIFG is set to zero, then ktest.pl will continue to
use MIN_CONFIG instead.
The default is that USE_OUTPUT_MIN_CONFIG is undefined.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Add a MIN_CONFIG_TYPE that can be set to 'test' or 'boot'. The default
is 'boot' which is what make_min_config has done previously: makes a
config file that is the minimum needed to boot the target.
But when MIN_CONFIG_TYPE is set to 'test', not only must the target
boot, but it must also successfully run the TEST. This allows the
creation of a config file that is the minimum to boot and also
perform ssh to the target, or anything else a developer wants.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The PRE_BUILD and POST_BUILD options of ktest are added to allow the
user to add temporary patch to the system and remove it on builds. This
is sometimes use to take a change from another git branch and add it to
a series without the fix so that this series can be tested, when an
unrelated bug exists in the series.
The problem comes when a tagged commit is being used. For example, if
v3.2 is being tested, and we add a patch to it, the kernelrelease for
that commit will be 3.2.0+, but without the patch the version will be
3.2.0. This can cause problems when the kernelrelease is determined for
creating the /lib/modules directory. The kernel booting has the '+' but
the module directory will not, and the modules will be missing for that
boot, and may not allow the kernel to succeed.
The fix is to put the creation of the kernelrelease in the POST_BUILD
logic, before it applies the POST_BUILD operation. The POST_BUILD is
where the patch may be removed, removing the '+' from the kernelrelease.
The calculation of the kernelrelease will also stay in its current
location but will be ignored if it was already calculated previously.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The change to let individual tests decide to reboot the machine on
success of the entire test also prevented errors from rebooting
when an error was detected.
The "no_reboot" variable was only cleared if the test had
reboot_on_success set. But the no_reboot variable also prevents the test
rebooting when an error was detected even when REBOOT_ON_ERROR was set.
Add a new "reboot_success" variable that is used to determine if the
test should reboot on success and not touch the no_reboot variable.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When BISECT_REVERSE and BISECT_SKIP are used together with boot or test
testing, build failures are treated as boot or test failures and
'git bisect bad' is executed instead of 'git bisect skip'. This is because
the $ret value of -1 is treated as a build failure, but the $reverse_bisect
logic does not properly handle this.
Simple fix, only invert it if it is positive.
Link: http://lkml.kernel.org/r/1335235380-8509-1-git-send-email-Russ.Dill@ti.com
Signed-off-by: Russ Dill <Russ.Dill@ti.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
hugepage-mmap.c, hugepage-shm.c and map_hugetlb.c in Documentation/vm are
simple pass/fail tests, It's better to promote them to
tools/testing/selftests.
Thanks suggestion of Andrew Morton about this. They all need firstly
setting up proper nr_hugepages and hugepage-mmap need to mount hugetlbfs.
So I add a shell script run_vmtests to do such work which will call the
three test programs and check the return value of them.
Changes to original code including below:
a. add run_vmtests script
b. return error when read_bytes mismatch with writed bytes.
c. coding style fixes: do not use assignment in if condition
[akpm@linux-foundation.org: build the targets before trying to execute them]
[akpm@linux-foundation.org: Documentation/vm/ no longer has a Makefile. Fixes "make clean"]
Signed-off-by: Dave Young <dyoung@redhat.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
So a "make run_tests" will build the tests before trying to run them.
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Remove the run_tests script and launch the selftests by calling "make
run_tests" from the selftests top directory instead. This delegates to
the Makefile in each selftest directory, where it is decided how to launch
the local test.
This removes the need to add each selftest directory to the now removed
"run_tests" top script.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest changes from Steven Rostedt.
* tag 'ktest-v3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Allow a test to override REBOOT_ON_SUCCESS
ktest: Fix SWITCH_TO_GOOD to also reboot the machine
ktest: Add SCP_TO_TARGET_INSTALL option
ktest: Add warning when bugs are ignored
ktest: Add INSTALL_MOD_STRIP=1 when installing modules
|
|
The option REBOOT_ON_SUCCESS is global, and will have the machine reboot
the the box if all tests are successful. But a test may not want the
machine to reboot, and perhaps have the kernel it loaded be used to
install the next kernel. Or the last test may set up a kernel that the
user may want to look at. In this case, the user could have the global
option REBOOT_ON_SUCCESS be true, but if a test is defined to run at the
end, that test can override the global option and keep the kernel it
installed for the user to log in with.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When the option SWITCH_TO_GOOD is set, it will be called when the system
needs to reboot to the good server. But currently, this keeps the reboot
from happening. The SWITCH_TO_GOOD is just a way to get to a new kernel,
it may not mean to not reboot.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Currently the option used to scp both the modules to the target as well
as the kernel image are the same (SCP_TO_TARGET). But some embedded
boards may require them to be different. The modules may need to be put
directly on the board, but the kernel image may need to go to a
tftpserver.
Add the option SCP_TO_TARGET_INSTALL that will allow the user to change
the config so that they may have the modules and image got to different
machines.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When IGNORE_ERRORS is set, ktest will not fail a test if a backtrace
is detected. But this can be an issue if the user added it in the
config but forgot to remove it. They may be left wondering why their
test did not fail, or even worse, why their bisect gave the wrong
commit.
Add a warning in the output if IGNORE_WARNINGS is set, and ktest detects
a kernel error.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
To keep the modules from bloating the target's filesystem
strip them during the install.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree from Jiri Kosina:
"It's indeed trivial -- mostly documentation updates and a bunch of
typo fixes from Masanari.
There are also several linux/version.h include removals from Jesper."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits)
kcore: fix spelling in read_kcore() comment
constify struct pci_dev * in obvious cases
Revert "char: Fix typo in viotape.c"
init: fix wording error in mm_init comment
usb: gadget: Kconfig: fix typo for 'different'
Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c"
writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header
writeback: fix typo in the writeback_control comment
Documentation: Fix multiple typo in Documentation
tpm_tis: fix tis_lock with respect to RCU
Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c"
Doc: Update numastat.txt
qla4xxx: Add missing spaces to error messages
compiler.h: Fix typo
security: struct security_operations kerneldoc fix
Documentation: broken URL in libata.tmpl
Documentation: broken URL in filesystems.tmpl
mtd: simplify return logic in do_map_probe()
mm: fix comment typo of truncate_inode_pages_range
power: bq27x00: Fix typos in comment
...
|
