summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2014-11-18sound: exynos4_wm1811: Disable suspend code for uninitialized AIFSylwester Nawrocki1-1/+4
Currently there is only AIF1 interface initialized in this driver. Temporarily disable code that tries to suspend AIF2 until support for this interface is added. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-11-18sound: Add exynos4/wm1811 machine driverSylwester Nawrocki3-0/+1337
TODO: - complete bindings documentation, - enable remaining audio interfaces (Voice, Bluetooth, Secondary DAI). Signed-off-by: KwangHui Cho <kwanghui.cho@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-11-18sound: soc: samsung: Add Trats platform audio driverTomasz Figa3-0/+342
This patch adds ASoC platform glue driver for Trats board. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-11-18sound: soc: codecs: Import Yamaha YMU823 (MC1N2) codec driverTomasz Figa33-0/+53580
This patch adds initial version of Yamaha YMU823 (MC1N2) codec driver ported for Linux 3.8 and Device Tree. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-11-18sound: samsung: i2s: Correct I2S clock handlingTomasz Figa2-17/+107
Moving to Common Clock Framework introduced the need to configure clock hierarchy and rates in driver. This patch reworks clock handling in samsung-i2s driver to meet this requirement. Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-11-18ASoC: samsung: Add pinctrl support to I2S driverSylwester Nawrocki1-1/+5
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-11-14ALSA: pcm: Zero-clear reserved fields of PCM status ioctl in compat modeTakashi Iwai1-0/+2
commit 317168d0c766defd14b3d0e9c2c4a9a258b803ee upstream. In compat mode, we copy each field of snd_pcm_status struct but don't touch the reserved fields, and this leaves uninitialized values there. Meanwhile the native ioctl does zero-clear the whole structure, so we should follow the same rule in compat mode, too. Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-30ALSA: usb-audio: Add support for Steinberg UR22 USB interfaceVlad Catoi1-0/+30
commit f0b127fbfdc8756eba7437ab668f3169280bd358 upstream. Adding support for Steinberg UR22 USB interface via quirks table patch See Ubuntu bug report: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1317244 Also see threads: http://linux-audio.4202.n7.nabble.com/Support-for-Steinberg-UR22-Yamaha-USB-chipset-0499-1509-tc82888.html#a82917 http://www.steinberg.net/forums/viewtopic.php?t=62290 Tested by at least 4 people judging by the threads. Did not test MIDI interface, but audio output and capture both are functional. Built 3.17 kernel with this driver on Ubuntu 14.04 & tested with mpg123 Patch applied to 3.13 Ubuntu kernel works well enough for daily use. Signed-off-by: Vlad Catoi <vladcatoi@gmail.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-30ALSA: emu10k1: Fix deadlock in synth voice lookupTakashi Iwai1-4/+2
commit 95926035b187cc9fee6fb61385b7da9c28123f74 upstream. The emu10k1 voice allocator takes voice_lock spinlock. When there is no empty stream available, it tries to release a voice used by synth, and calls get_synth_voice. The callback function, snd_emu10k1_synth_get_voice(), however, also takes the voice_lock, thus it deadlocks. The fix is simply removing the voice_lock holds in snd_emu10k1_synth_get_voice(), as this is always called in the spinlock context. Reported-and-tested-by: Arthur Marsh <arthur.marsh@internode.on.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-30ALSA: pcm: use the same dma mmap codepath both for arm and arm64Anatol Pomozov1-1/+1
commit a011e213f3700233ed2a676f1ef0a74a052d7162 upstream. This avoids following kernel crash when try to playback on arm64 [ 107.497203] [<ffffffc00046b310>] snd_pcm_mmap_data_fault+0x90/0xd4 [ 107.503405] [<ffffffc0001541ac>] __do_fault+0xb0/0x498 [ 107.508565] [<ffffffc0001576a0>] handle_mm_fault+0x224/0x7b0 [ 107.514246] [<ffffffc000092640>] do_page_fault+0x11c/0x310 [ 107.519738] [<ffffffc000081100>] do_mem_abort+0x38/0x98 Tested: backported to 3.14 and tried to playback on arm64 machine Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05ASoC: davinci-mcasp: Correct rx format unit configurationPeter Ujfalusi1-1/+10
commit fe0a29e163a5d045c73faab682a8dac71c2f8012 upstream. In case of capture we should not use rotation. The reverse and mask is enough to get the data align correctly from the bus to MCU: Format data from bus after reverse (XRBUF) S16_LE: |LSB|MSB|xxx|xxx| |xxx|xxx|MSB|LSB| S24_3LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB| S24_LE: |LSB|DAT|MSB|xxx| |xxx|MSB|DAT|LSB| S32_LE: |LSB|DAT|DAT|MSB| |MSB|DAT|DAT|LSB| With this patch all supported formats will work for playback and capture. Reported-by: Jyri Sarha <jsarha@ti.com> (broken S24_3LE capture) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05ALSA: pcm: fix fifo_size frame calculationClemens Ladisch1-3/+5
commit a9960e6a293e6fc3ed414643bb4e4106272e4d0a upstream. The calculated frame size was wrong because snd_pcm_format_physical_width() actually returns the number of bits, not bytes. Use snd_pcm_format_size() instead, which not only returns bytes, but also simplifies the calculation. Fixes: 8bea869c5e56 ("ALSA: PCM midlevel: improve fifo_size handling") Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05ALSA: hda - Fix invalid pin powermap without jack detectionTakashi Iwai1-5/+12
commit 7a9744cb455e6faa287e148394b4b422a6f3c5c4 upstream. When a driver is set up without the jack detection explicitly (either by passing a model option or via a specific fixup), the pin powermap of IDT/STAC codecs is set up wrongly, resulting in the silence output. It's because of a logic failure in stac_init_power_map(). It tries to avoid creating a callback for the pins that have other auto-hp and auto-mic callbacks, but the check is done in a wrong way at a wrong time. The stac_init_power_map() should be called after creating other jack detection ctls, and the jack callback should be created only for jack-detectable widgets. This patch fixes the check in stac_init_power_map() and its callee at the right place, after snd_hda_gen_build_controls(). Reported-by: Adam Richter <adam_richter2004@yahoo.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05ALSA: hda - Fix COEF setups for ALC1150 codecTakashi Iwai1-0/+2
commit acf08081adb5e8fe0519eb97bb49797ef52614d6 upstream. ALC1150 codec seems to need the COEF- and PLL-setups just like its compatible ALC882 codec. Some machines (e.g. SunMicro X10SAT) show the problem like too low output volumes unless the COEF setup is applied. Reported-and-tested-by: Dana Goyette <danagoyette@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05ALSA: core: fix buffer overflow in snd_info_get_line()Clemens Ladisch1-2/+2
commit ddc64b278a4dda052390b3de1b551e59acdff105 upstream. snd_info_get_line() documents that its last parameter must be one less than the buffer size, but this API design guarantees that (literally) every caller gets it wrong. Just change this parameter to have its obvious meaning. Reported-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17ASoC: pxa-ssp: drop SNDRV_PCM_FMTBIT_S24_LEDaniel Mack1-3/+1
commit 9301503af016eb537ccce76adec0c1bb5c84871e upstream. This mode is unsupported, as the DMA controller can't do zero-padding of samples. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Johannes Stezenbach <js@sig21.net> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17ASoC: max98090: Fix missing free_irqJarkko Nikula1-1/+1
commit 4adeb0ccf86a5af1825bbfe290dee9e60a5ab870 upstream. max98090.c doesn't free the threaded interrupt it requests. This causes an oops when doing "cat /proc/interrupts" after snd-soc-max98090.ko is unloaded. Fix this by requesting the interrupt by using devm_request_threaded_irq(). Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17ASoC: samsung: Correct I2S DAI suspend/resume opsSylwester Nawrocki1-10/+6
commit d3d4e5247b013008a39e4d5f69ce4c60ed57f997 upstream. We should save/restore relevant I2S registers regardless of the dai->active flag, otherwise some settings are being lost after system suspend/resume cycle. E.g. I2S slave mode set only during dai initialization is not preserved and the device ends up in master mode after system resume. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17ASoC: wm_adsp: Add missing MODULE_LICENSEPraveen Diwakar1-0/+2
commit 0a37c6efec4a2fdc2563c5a8faa472b814deee80 upstream. Since MODULE_LICENSE is missing the module load fails, so add this for module. Signed-off-by: Praveen Diwakar <praveen.diwakar@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-17ASoC: pcm: fix dpcm_path_put in dpcm runtime updateQiao Zhou1-0/+1
commit 7ed9de76ff342cbd717a9cf897044b99272cb8f8 upstream. we need to release dapm widget list after dpcm_path_get in soc_dpcm_runtime_update. otherwise, there will be potential memory leak. add dpcm_path_put to fix it. Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-05ALSA: hda/realtek - Avoid setting wrong COEF on ALC269 & coTakashi Iwai1-5/+12
commit f3ee07d8b6e061bf34a7167c3f564e8da4360a99 upstream. ALC269 & co have many vendor-specific setups with COEF verbs. However, some verbs seem specific to some codec versions and they result in the codec stalling. Typically, such a case can be avoided by checking the return value from reading a COEF. If the return value is -1, it implies that the COEF is invalid, thus it shouldn't be written. This patch adds the invalid COEF checks in appropriate places accessing ALC269 and its variants. The patch actually fixes the resume problem on Acer AO725 laptop. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52181 Tested-by: Francesco Muzio <muziofg@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-05ALSA: hda/ca0132 - Don't try loading firmware at resume when already failedTakashi Iwai1-1/+6
commit e24aa0a4c5ac92a171d9dd74a8d3dbf652990d36 upstream. CA0132 driver tries to reload the firmware at resume. Usually this works since the firmware loader core caches the firmware contents by itself. However, if the driver failed to load the firmwares (e.g. missing files), reloading the firmware at resume goes through the actual file loading code path, and triggers a kernel WARNING like: WARNING: CPU: 10 PID:11371 at drivers/base/firmware_class.c:1105 _request_firmware+0x9ab/0x9d0() For avoiding this situation, this patch makes CA0132 skipping the f/w loading at resume when it failed at probe time. Reported-and-tested-by: Janek Kozicki <cosurgi@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-05ALSA: virtuoso: add Xonar Essence STX II supportClemens Ladisch3-4/+13
commit f42bb22243d2ae264d721b055f836059fe35321f upstream. Just add the PCI ID for the STX II. It appears to work the same as the STX, except for the addition of the not-yet-supported daughterboard. Tested-by: Mario <fugazzi99@gmail.com> Tested-by: corubba <corubba@gmx.de> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-05ALSA: hda - fix an external mic jack problem on a HP machineHui Wang1-0/+12
commit 7440850c20b69658f322119d20a94dc914127cc7 upstream. ON the machine, two pin complex (0xb and 0xe) are both routed to the same external right-side mic jack, this makes the jack can't work. To fix this problem, set the 0xe to "not connected". BugLink: https://bugs.launchpad.net/bugs/1350148 Tested-by: Franz Hsieh <franz.hsieh@canonical.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09ALSA: usb-audio: Prevent printk ratelimiting from spamming kernel log while ↵Sander Eikelenboom1-3/+3
DEBUG not defined commit b7a7723513dc89f83d6df13206df55d4dc26e825 upstream. This (widely used) construction: if(printk_ratelimit()) dev_dbg() Causes the ratelimiting to spam the kernel log with the "callbacks suppressed" message below, even while the dev_dbg it is supposed to rate limit wouldn't print anything because DEBUG is not defined for this device. [ 533.803964] retire_playback_urb: 852 callbacks suppressed [ 538.807930] retire_playback_urb: 852 callbacks suppressed [ 543.811897] retire_playback_urb: 852 callbacks suppressed [ 548.815745] retire_playback_urb: 852 callbacks suppressed [ 553.819826] retire_playback_urb: 852 callbacks suppressed So use dev_dbg_ratelimited() instead of this construction. Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09ALSA: usb-audio: Suppress repetitive debug messages from retire_playback_urb()Tim Gardner1-1/+2
commit a5065eb6da55b226661456e6a7435f605df98111 upstream. BugLink: http://bugs.launchpad.net/bugs/1305133 Malfunctioning or slow devices can cause a flood of dmesg SPAM. I've ignored checkpatch.pl complaints about the use of printk_ratelimit() in favour of prior art in sound/usb/pcm.c. WARNING: Prefer printk_ratelimited or pr_<level>_ratelimited to printk_ratelimit + if (printk_ratelimit() && Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Eldad Zack <eldad@fogrefinery.com> Cc: Daniel Mack <zonque@gmail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26ALSA: control: Make sure that id->index does not overflowLars-Peter Clausen1-0/+3
commit 883a1d49f0d77d30012f114b2e19fc141beb3e8e upstream. The ALSA control code expects that the range of assigned indices to a control is continuous and does not overflow. Currently there are no checks to enforce this. If a control with a overflowing index range is created that control becomes effectively inaccessible and unremovable since snd_ctl_find_id() will not be able to find it. This patch adds a check that makes sure that controls with a overflowing index range can not be created. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26ALSA: control: Handle numid overflowLars-Peter Clausen1-0/+4
commit ac902c112d90a89e59916f751c2745f4dbdbb4bd upstream. Each control gets automatically assigned its numids when the control is created. The allocation is done by incrementing the numid by the amount of allocated numids per allocation. This means that excessive creation and destruction of controls (e.g. via SNDRV_CTL_IOCTL_ELEM_ADD/REMOVE) can cause the id to eventually overflow. Currently when this happens for the control that caused the overflow kctl->id.numid + kctl->count will also over flow causing it to be smaller than kctl->id.numid. Most of the code assumes that this is something that can not happen, so we need to make sure that it won't happen Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26ALSA: control: Don't access controls outside of protected regionsLars-Peter Clausen1-5/+10
commit fd9f26e4eca5d08a27d12c0933fceef76ed9663d upstream. A control that is visible on the card->controls list can be freed at any time. This means we must not access any of its memory while not holding the controls_rw_lock. Otherwise we risk a use after free access. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26ALSA: control: Fix replacing user controlsLars-Peter Clausen1-16/+9
commit 82262a46627bebb0febcc26664746c25cef08563 upstream. There are two issues with the current implementation for replacing user controls. The first is that the code does not check if the control is actually a user control and neither does it check if the control is owned by the process that tries to remove it. That allows userspace applications to remove arbitrary controls, which can cause a user after free if a for example a driver does not expect a control to be removed from under its feed. The second issue is that on one hand when a control is replaced the user_ctl_count limit is not checked and on the other hand the user_ctl_count is increased (even though the number of user controls does not change). This allows userspace, once the user_ctl_count limit as been reached, to repeatedly replace a control until user_ctl_count overflows. Once that happens new controls can be added effectively bypassing the user_ctl_count limit. Both issues can be fixed by instead of open-coding the removal of the control that is to be replaced to use snd_ctl_remove_user_ctl(). This function does proper permission checks as well as decrements user_ctl_count after the control has been removed. Note that by using snd_ctl_remove_user_ctl() the check which returns -EBUSY at beginning of the function if the control already exists is removed. This is not a problem though since the check is quite useless, because the lock that is protecting the control list is released between the check and before adding the new control to the list, which means that it is possible that a different control with the same settings is added to the list after the check. Luckily there is another check that is done while holding the lock in snd_ctl_add(), so we'll rely on that to make sure that the same control is not added twice. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26ALSA: control: Protect user controls against concurrent accessLars-Peter Clausen2-6/+26
commit 07f4d9d74a04aa7c72c5dae0ef97565f28f17b92 upstream. The user-control put and get handlers as well as the tlv do not protect against concurrent access from multiple threads. Since the state of the control is not updated atomically it is possible that either two write operations or a write and a read operation race against each other. Both can lead to arbitrary memory disclosure. This patch introduces a new lock that protects user-controls from concurrent access. Since applications typically access controls sequentially than in parallel a single lock per card should be fine. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26ALSA: hda - Add quirk for external mic on Lifebook U904David Henningsson1-0/+9
commit 2041d56464a067461d7cc21734a0f024587ed2ff upstream. According to the bug reporter (Данило Шеган), the external mic starts to work and has proper jack detection if only pin 0x19 is marked properly as an external headset mic. AlsaInfo at https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1328587/+attachment/4128991/+files/AlsaInfo.txt BugLink: https://bugs.launchpad.net/bugs/1328587 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26ALSA: hda/realtek - Add support of ALC891 codecKailang Yang1-0/+1
commit b6c5fbad16aa5026f508093a8d651c25e1cb6179 upstream. New codec support for ALC891. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26ASoC: max98090: Fix reset at resume timeLiam Girdwood1-0/+3
commit 25b4ab430f8e166c9b63f4db28e7e812d5a59396 upstream. Reset needs to wait 20ms before other codec IO is performed. This wait was not being performed. Fix this by making sure the reset register is not restored with the cache, but use the manual reset method in resume with the wait. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-11ALSA: hda/realtek - Fix COEF widget NID for ALC260 replacer fixupTakashi Iwai1-2/+2
commit 192a98e280e560510a62aca8cfa83b4ae7c095bb upstream. The conversion to a fixup table for Replacer model with ALC260 in commit 20f7d928 took the wrong widget NID for COEF setups. Namely, NID 0x1a should have been used instead of NID 0x20, which is the common node for all Realtek codecs but ALC260. Fixes: 20f7d928fa6e ('ALSA: hda/realtek - Replace ALC260 model=replacer with the auto-parser') Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-11ALSA: hda/realtek - Correction of fixup codes for PB V7900 laptopRonan Marquet1-4/+2
commit e30cf2d2bed3aed74a651c64de323ba26e4ff7d0 upstream. Correcion of wrong fixup entries add in commit ca8f0424 to replace static model quirk for PB V7900 laptop (will model). [note: the removal of ALC260_FIXUP_HP_PIN_0F chain is also needed as a part of the fix; otherwise the pin is set up wrongly as a headphone, and user-space (PulseAudio) may be wrongly trying to detect the jack state -- tiwai] Fixes: ca8f04247eaa ('ALSA: hda/realtek - Add the fixup codes for ALC260 model=will') Signed-off-by: Ronan Marquet <ronan.marquet@orange.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07ASoC: wm8962: Update register CLASS_D_CONTROL_1 to be non-volatileCharles Keepax2-3/+16
commit 44330ab516c15dda8a1e660eeaf0003f84e43e3f upstream. The register CLASS_D_CONTROL_1 is marked as volatile because it contains a bit, DAC_MUTE, which is also mirrored in the ADC_DAC_CONTROL_1 register. This causes problems for the "Speaker Switch" control, which will report an error if the CODEC is suspended because it relies on a volatile register. To resolve this issue mark CLASS_D_CONTROL_1 as non-volatile and manually keep the register cache in sync by updating both bits when changing the mute status. Reported-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07ALSA: hda - Fix onboard audio on Intel H97/Z97 chipsetsTakashi Iwai1-0/+3
commit 77f07800cb456bed6e5c345e6e4e83e8eda62437 upstream. The recent Intel H97/Z97 chipsets need the similar setups like other Intel chipsets for snooping, etc. Especially without snooping, the audio playback stutters or gets corrupted. This fix patch just adds the corresponding PCI ID entry with the proper flags. Reported-and-tested-by: Arthur Borsboom <arthurborsboom@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07ALSA: usb-audio: work around corrupted TEAC UD-H01 feedback dataClemens Ladisch2-1/+15
commit 7040b6d1febfdbd9c1595efb751d492cd2503f96 upstream. The TEAC UD-H01 firmware sends wrong feedback frequency values, thus causing the PC to send the samples at a wrong rate, which results in clicks and crackles in the output. Add a workaround to detect and fix the corruption. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> [mick37@gmx.de: use sender->udh01_fb_quirk rather than ep->udh01_fb_quirk in snd_usb_handle_sync_urb()] Reported-and-tested-by: Mick <mick37@gmx.de> Reported-and-tested-by: Andrea Messa <andr.messa@tiscali.it> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06ALSA: hda/realtek - Add support of ALC288 codecKailang Yang1-0/+2
commit 7c66593286bcd153e4868383e675673a27071bd5 upstream. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06ALSA: hda - Fix silent speaker output due to mute LED fixupTakashi Iwai1-2/+3
commit 415d555e6b398b00fc1733f0113065a54df9106a upstream. The recent fixups for HP laptops to support the mute LED made the speaker output silent on some machines. It turned out that they use the NID 0x18 for the speaker while it's also used for controlling the LED via VREF bits although the current driver code blindly assumes that such a node is a mic pin (where 0x18 is usually so). This patch fixes the problem by only changing the VREF bits and keeping the other pin ctl bits. Reported-and-tested-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06ALSA: ice1712: Fix boundary checks in PCM pointer opsTakashi Iwai1-5/+10
commit 4f8e940095536bc002a81666a4107a581c84e9b9 upstream. PCM pointer callbacks in ice1712 driver check the buffer size boundary wrongly between bytes and frames. This leads to PCM core warnings like: snd_pcm_update_hw_ptr0: 105 callbacks suppressed ALSA pcm_lib.c:352 BUG: pcmC3D0c:0, pos = 5461, buffer size = 5461, period size = 2730 This patch fixes these checks to be placed after the proper unit conversions. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06ALSA: hda - Enable beep for ASUS 1015EW. Trevor King1-0/+1
commit a4b7f21d7b42b33609df3f86992a8deff80abfaf upstream. The `lspci -nnvv` output contains (wrapped for line length): 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:115d] Signed-off-by: W. Trevor King <wking@tremily.us> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06ASoC: cs42l73: Fix mask bits for SOC_VALUE_ENUM_SINGLEBrian Austin1-3/+3
commit 1555b652970e541fa1cb80c61ffc696bbfb92bb7 upstream. The mask bits values were wrong for the SOC_VALUE_ENUM_SINGLE for the mono mix controls. Reported-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06ASoC: cs42l52: Fix mask bits for SOC_VALUE_ENUM_SINGLEBrian Austin1-4/+4
commit d31a33dd7792c7d6c11fda226a3b9e4fb7f86f95 upstream. The mask bits values were wrong for the SOC_VALUE_ENUM_SINGLE for the PCM/ADC Swap controls Reported-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-06ASoC: cs42l51: Fix SOC_DOUBLE_R_SX_TLV shift values for ADC, PCM, and Analog ↵Brian Austin1-5/+4
kcontrols commit 7272e051157ccd5871b5d939548d0ba5a94a2965 upstream. The shift values for the ADC,PCM, and Analog kcontrols were wrong causing wrong values for the SOC_DOUBLE_R_SX_TLV macros Fixed the TLV for aout_tlv to show -102dB correctly Fixes: 1d99f2436d (ASoC: core: Rework SOC_DOUBLE_R_SX_TLV add SOC_SINGLE_SX_TLV) Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31ASoC: max98090: make REVISION_ID readableStephen Warren1-0/+1
commit e126a646f77fdd66978785cb0a3a5e46b07aee2e upstream. The REVISION_ID register is not currently marked readable. snd_soc_read() refuses to read the register, and hence probe() fails. Fixes: d4807ad2c4c0 ("regmap: Check readable regs in _regmap_read") [exposed the bug, by checking for readability] Fixes: 685e42154dcf ("ASoC: Replace max98090 Device Driver") [left out this register from the readable list] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-31ALSA: compress: Pass through return value of open ops callbackCharles Keepax1-1/+1
commit 749d32237bf39e6576dd95bfdf24e4378e51716c upstream. The snd_compr_open function would always return 0 even if the compressed ops open function failed, obviously this is incorrect. Looks like this was introduced by a small typo in: commit a0830dbd4e42b38aefdf3fb61ba5019a1a99ea85 ALSA: Add a reference counter to card instance This patch returns the value from the compressed op as it should. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23ALSA: oxygen: modify adjust_dg_dac_routing functionRoman Volkov1-0/+10
commit 1f91ecc14deea9461aca93273d78871ec4d98fcd upstream. When selecting the audio output destinations (headphones, FP headphones, multichannel output), the channel routing should be changed depending on what destination selected. Also unnecessary I2S channels are digitally muted. This function called when the user selects the destination in the ALSA mixer. Signed-off-by: Roman Volkov <v1ron@mail.ru> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-23ALSA: hda - Add missing loopback merge path for AD1884/1984 codecsTakashi Iwai1-0/+1
commit c5eda4c1bf6214332c46fb2f4e7c42a85e5e5643 upstream. The mixer widget (NID 0x20) of AD1884 and AD1984 codecs isn't connected directly to the actual I/O paths but only via another mixer widget (NID 0x21). We need a similar fix as we did for AD1882. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 03:06:12 +0000