summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2010-04-27bluetooth: handle l2cap_create_connless_pdu() errorsDan Carpenter1-1/+4
l2cap_create_connless_pdu() can sometimes return ERR_PTR(-ENOMEM) or ERR_PTR(-EFAULT). Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26bridge br_multicast: Ensure to initialize BR_INPUT_SKB_CB(skb)->mrouters_only.YOSHIFUJI Hideaki / 吉藤英明1-3/+3
Even with commit 32dec5dd0233ebffa9cae25ce7ba6daeb7df4467 ("bridge br_multicast: Don't refer to BR_INPUT_SKB_CB(skb)->mrouters_only without IGMP snooping."), BR_INPUT_SKB_CB(skb)->mrouters_only is not appropriately initialized if IGMP snooping support is compiled and disabled, so we can see garbage. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26ieee802154: Fix oops during ieee802154_sock_ioctlStefan Schmidt1-0/+3
Trying to run izlisten (from lowpan-tools tests) on a device that does not exists I got the oops below. The problem is that we are using get_dev_by_name without checking if we really get a device back. We don't in this case and writing to dev->type generates this oops. [Oops code removed by Dmitry Eremin-Solenikov] If possible this patch should be applied to the current -rc fixes branch. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-25ipv6: Fix inet6_csk_bind_conflict()Eric Dumazet1-1/+1
Commit fda48a0d7a84 (tcp: bind() fix when many ports are bound) introduced a bug on IPV6 part. We should not call ipv6_addr_any(inet6_rcv_saddr(sk2)) but ipv6_addr_any(inet6_rcv_saddr(sk)) because sk2 can be IPV4, while sk is IPV6. Reported-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22tcp: bind() fix when many ports are boundEric Dumazet2-10/+21
Port autoselection done by kernel only works when number of bound sockets is under a threshold (typically 30000). When this threshold is over, we must check if there is a conflict before exiting first loop in inet_csk_get_port() Change inet_csk_bind_conflict() to forbid two reuse-enabled sockets to bind on same (address,port) tuple (with a non ANY address) Same change for inet6_csk_bind_conflict() Reported-by: Gaspar Chilingarov <gasparch@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22rdma: potential ERR_PTR dereferenceDan Carpenter1-1/+1
In the original code, the "goto out" calls "rdma_destroy_id(cm_id);" That isn't needed here and would cause problems because "cm_id" is an ERR_PTR. The new code just returns directly. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22rtnetlink: potential ERR_PTR dereferenceDan Carpenter1-2/+3
In the original code, if rtnl_create_link() returned an ERR_PTR then that would get passed to rtnl_configure_link() which dereferences it. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21net: ipv6 bind to device issueJiri Olsa1-1/+1
The issue raises when having 2 NICs both assigned the same IPv6 global address. If a sender binds to a particular NIC (SO_BINDTODEVICE), the outgoing traffic is being sent via the first found. The bonded device is thus not taken into an account during the routing. From the ip6_route_output function: If the binding address is multicast, linklocal or loopback, the RT6_LOOKUP_F_IFACE bit is set, but not for global address. So binding global address will neglect SO_BINDTODEVICE-binded device, because the fib6_rule_lookup function path won't check for the flowi::oif field and take first route that fits. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Scott Otto <scott.otto@alcatel-lucent.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21ipv6: allow to send packet after receiving ICMPv6 Too Big message with MTU ↵Shan Wei1-1/+1
field less than IPV6_MIN_MTU According to RFC2460, PMTU is set to the IPv6 Minimum Link MTU (1280) and a fragment header should always be included after a node receiving Too Big message reporting PMTU is less than the IPv6 Minimum Link MTU. After receiving a ICMPv6 Too Big message reporting PMTU is less than the IPv6 Minimum Link MTU, sctp *can't* send any data/control chunk that total length including IPv6 head and IPv6 extend head is less than IPV6_MIN_MTU(1280 bytes). The failure occured in p6_fragment(), about reason see following(take SHUTDOWN chunk for example): sctp_packet_transmit (SHUTDOWN chunk, len=16 byte) |------sctp_v6_xmit (local_df=0) |------ip6_xmit |------ip6_output (dst_allfrag is ture) |------ip6_fragment In ip6_fragment(), for local_df=0, drops the the packet and returns EMSGSIZE. The patch fixes it with adding check length of skb->len. In this case, Ipv6 not to fragment upper protocol data, just only add a fragment header before it. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21X25 fix dead unaccepted socketsandrew hendry1-0/+1
1, An X25 program binds and listens 2, calls arrive waiting to be accepted 3, Program exits without accepting 4, Sockets time out but don't get correctly cleaned up 5, cat /proc/net/x25/socket shows the dead sockets with bad inode fields. This line borrowed from AX25 sets the dying socket so the timers clean up later. Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21xfrm6: ensure to use the same dev when building a bundleNicolas Dichtel1-1/+1
When building a bundle, we set dst.dev and rt6.rt6i_idev. We must ensure to set the same device for both fields. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21net: Fix an RCU warning in dev_pick_tx()David Howells1-1/+1
Fix the following RCU warning in dev_pick_tx(): =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- net/core/dev.c:1993 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 2 locks held by swapper/0: #0: (&idev->mc_ifc_timer){+.-...}, at: [<ffffffff81039e65>] run_timer_softirq+0x17b/0x278 #1: (rcu_read_lock_bh){.+....}, at: [<ffffffff812ea3eb>] dev_queue_xmit+0x14e/0x4dc stack backtrace: Pid: 0, comm: swapper Not tainted 2.6.34-rc5-cachefs #4 Call Trace: <IRQ> [<ffffffff810516c4>] lockdep_rcu_dereference+0xaa/0xb2 [<ffffffff812ea4f6>] dev_queue_xmit+0x259/0x4dc [<ffffffff812ea3eb>] ? dev_queue_xmit+0x14e/0x4dc [<ffffffff81052324>] ? trace_hardirqs_on+0xd/0xf [<ffffffff81035362>] ? local_bh_enable_ip+0xbc/0xc1 [<ffffffff812f0954>] neigh_resolve_output+0x24b/0x27c [<ffffffff8134f673>] ip6_output_finish+0x7c/0xb4 [<ffffffff81350c34>] ip6_output2+0x256/0x261 [<ffffffff81052324>] ? trace_hardirqs_on+0xd/0xf [<ffffffff813517fb>] ip6_output+0xbbc/0xbcb [<ffffffff8135bc5d>] ? fib6_force_start_gc+0x2b/0x2d [<ffffffff81368acb>] mld_sendpack+0x273/0x39d [<ffffffff81368858>] ? mld_sendpack+0x0/0x39d [<ffffffff81052099>] ? mark_held_locks+0x52/0x70 [<ffffffff813692fc>] mld_ifc_timer_expire+0x24f/0x288 [<ffffffff81039ed6>] run_timer_softirq+0x1ec/0x278 [<ffffffff81039e65>] ? run_timer_softirq+0x17b/0x278 [<ffffffff813690ad>] ? mld_ifc_timer_expire+0x0/0x288 [<ffffffff81035531>] ? __do_softirq+0x69/0x140 [<ffffffff8103556a>] __do_softirq+0xa2/0x140 [<ffffffff81002e0c>] call_softirq+0x1c/0x28 [<ffffffff81004b54>] do_softirq+0x38/0x80 [<ffffffff81034f06>] irq_exit+0x45/0x47 [<ffffffff810177c3>] smp_apic_timer_interrupt+0x88/0x96 [<ffffffff810028d3>] apic_timer_interrupt+0x13/0x20 <EOI> [<ffffffff810488dd>] ? __atomic_notifier_call_chain+0x0/0x86 [<ffffffff810096bf>] ? mwait_idle+0x6e/0x78 [<ffffffff810096b6>] ? mwait_idle+0x65/0x78 [<ffffffff810011cb>] cpu_idle+0x4d/0x83 [<ffffffff81380b05>] rest_init+0xb9/0xc0 [<ffffffff81380a4c>] ? rest_init+0x0/0xc0 [<ffffffff8168dcf0>] start_kernel+0x392/0x39d [<ffffffff8168d2a3>] x86_64_start_reservations+0xb3/0xb7 [<ffffffff8168d38b>] x86_64_start_kernel+0xe4/0xeb An rcu_dereference() should be an rcu_dereference_bh(). Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller1-1/+4
2010-04-21ipv6: Fix tcp_v6_send_response transport header setting.Herbert Xu1-1/+1
My recent patch to remove the open-coded checksum sequence in tcp_v6_send_response broke it as we did not set the transport header pointer on the new packet. Actually, there is code there trying to set the transport header properly, but it sets it for the wrong skb ('skb' instead of 'buff'). This bug was introduced by commit a8fdf2b331b38d61fb5f11f3aec4a4f9fb2dedcb ("ipv6: Fix tcp_v6_send_response(): it didn't set skb transport header") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-20bridge: add a missing ntohs()Eric Dumazet1-1/+1
grec_nsrcs is in network order, we should convert to host horder in br_multicast_igmp3_report() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-20Merge branch 'master' of ↵David S. Miller2-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-04-19mac80211: pass HT changes to driver when off channelReinette Chatre1-0/+2
Since "mac80211: make off-channel work generic" drivers have not been notified of configuration changes after association or authentication. This caused more dependence on current state to ensure driver will be notified when configuration changes occur. One such problem arises if off-channel is in progress when HT information changes. Since HT is only enabled on the "oper_channel" the driver will never be notified of this change. Usually the driver is notified soon after of a BSS information change (BSS_CHANGED_HT) ... but since the driver did not get a notification that this is a HT channel the new BSS information does not make sense. Fix this by also changing the off-channel information when HT is enabled and thus cause driver to be notified correctly. This fixes a problem in 4965 when associated with 5GHz 40MHz channel. Without this patch the system can associate but is unable to transfer any data, not even ping. See http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2158 Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-19mac80211: remove bogus TX agg state assignmentJohannes Berg1-1/+0
When the addba timer expires but has no work to do, it should not affect the state machine. If it does, TX will not see the successfully established and we can also crash trying to re-establish the session. Cc: stable@kernel.org [2.6.32, 2.6.33] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds5-7/+11
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: gigaset: include cleanup cleanup packet : remove init_net restriction WAN: flush tx_queue in hdlc_ppp to prevent panic on rmmod hw_driver. ip: Fix ip_dev_loopback_xmit() net: dev_pick_tx() fix fib: suppress lockdep-RCU false positive in FIB trie. tun: orphan an skb on tx forcedeth: fix tx limit2 flag check iwlwifi: work around bogus active chains detection
2010-04-16packet : remove init_net restrictionDaniel Lezcano1-2/+0
The af_packet protocol is used by Perl to do ioctls as reported by Stephane Riviere: "Net::RawIP relies on SIOCGIFADDR et SIOCGIFHWADDR to get the IP and MAC addresses of the network interface." But in a new network namespace these ioctl fail because it is disabled for a namespace different from the init_net_ns. These two lines should not be there as af_inet and af_packet are namespace aware since a long time now. I suppose we forget to remove these lines because we sent the af_packet first, before af_inet was supported. Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr> Reported-by: Stephane Riviere <stephane.riviere@regis-dgac.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-15ip: Fix ip_dev_loopback_xmit()Eric Dumazet2-2/+2
Eric Paris got following trace with a linux-next kernel [ 14.203970] BUG: using smp_processor_id() in preemptible [00000000] code: avahi-daemon/2093 [ 14.204025] caller is netif_rx+0xfa/0x110 [ 14.204035] Call Trace: [ 14.204064] [<ffffffff81278fe5>] debug_smp_processor_id+0x105/0x110 [ 14.204070] [<ffffffff8142163a>] netif_rx+0xfa/0x110 [ 14.204090] [<ffffffff8145b631>] ip_dev_loopback_xmit+0x71/0xa0 [ 14.204095] [<ffffffff8145b892>] ip_mc_output+0x192/0x2c0 [ 14.204099] [<ffffffff8145d610>] ip_local_out+0x20/0x30 [ 14.204105] [<ffffffff8145d8ad>] ip_push_pending_frames+0x28d/0x3d0 [ 14.204119] [<ffffffff8147f1cc>] udp_push_pending_frames+0x14c/0x400 [ 14.204125] [<ffffffff814803fc>] udp_sendmsg+0x39c/0x790 [ 14.204137] [<ffffffff814891d5>] inet_sendmsg+0x45/0x80 [ 14.204149] [<ffffffff8140af91>] sock_sendmsg+0xf1/0x110 [ 14.204189] [<ffffffff8140dc6c>] sys_sendmsg+0x20c/0x380 [ 14.204233] [<ffffffff8100ad82>] system_call_fastpath+0x16/0x1b While current linux-2.6 kernel doesnt emit this warning, bug is latent and might cause unexpected failures. ip_dev_loopback_xmit() runs in process context, preemption enabled, so must call netif_rx_ni() instead of netif_rx(), to make sure that we process pending software interrupt. Same change for ip6_dev_loopback_xmit() Reported-by: Eric Paris <eparis@redhat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-15net: dev_pick_tx() fixEric Dumazet1-2/+6
When dev_pick_tx() caches tx queue_index on a socket, we must check socket dst_entry matches skb one, or risk a crash later, as reported by Denys Fedorysychenko, if old packets are in flight during a route change, involving devices with different number of queues. Bug introduced by commit a4ee3ce3 (net: Use sk_tx_queue_mapping for connected sockets) Reported-by: Denys Fedorysychenko <nuclearcat@nuclearcat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-14fib: suppress lockdep-RCU false positive in FIB trie.Eric Dumazet1-1/+3
Followup of commit 634a4b20 Allow tnode_get_child_rcu() to be called either under rcu_read_lock() protection or with RTNL held. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds11-28/+125
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (25 commits) smc91c92_cs: define multicast_table as unsigned char can: avoids a false warning e1000e: stop cleaning when we reach tx_ring->next_to_use igb: restrict WoL for 82576 ET2 Quad Port Server Adapter virtio_net: missing sg_init_table Revert "tcp: Set CHECKSUM_UNNECESSARY in tcp_init_nondata_skb" iwlwifi: need check for valid qos packet before free tcp: Set CHECKSUM_UNNECESSARY in tcp_init_nondata_skb udp: fix for unicast RX path optimization myri10ge: fix rx_pause in myri10ge_set_pauseparam net: corrected documentation for hardware time stamping stmmac: use resource_size() x.25 attempts to negotiate invalid throughput x25: Patch to fix bug 15678 - x25 accesses fields beyond end of packet. bridge: Fix IGMP3 report parsing cnic: Fix crash during bnx2x MTU change. qlcnic: fix set mac addr r6040: fix r6040_multicast_list vhost-net: fix vq_memory_access_ok error checking ath9k: fix double calls to ath_radio_enable ...
2010-04-13can: avoids a false warningEric Dumazet1-1/+1
At this point optlen == sizeof(sfilter) but some compilers are dumb. Reported-by: Németh Márton <nm127@freemail.h Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-12Merge branch 'for-2.6.34' of git://linux-nfs.org/~bfields/linuxLinus Torvalds1-1/+4
* 'for-2.6.34' of git://linux-nfs.org/~bfields/linux: svcrdma: RDMA support not yet compatible with RPC6
2010-04-11Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller475-58/+490
2010-04-11Revert "tcp: Set CHECKSUM_UNNECESSARY in tcp_init_nondata_skb"David S. Miller1-1/+0
This reverts commit 2626419ad5be1a054d350786b684b41d23de1538. It causes regressions for people with IGB cards. Connection requests don't complete etc. The true cause of the issue is still not known, but we should sort this out in net-next-2.6 not net-2.6 Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-08tcp: Set CHECKSUM_UNNECESSARY in tcp_init_nondata_skbDavid S. Miller1-0/+1
Back in commit 04a0551c87363f100b04d28d7a15a632b70e18e7 ("loopback: Drop obsolete ip_summed setting") we stopped setting CHECKSUM_UNNECESSARY in the loopback xmit. This is because such a setting was a lie since it implies that the checksum field of the packet is properly filled in. Instead what happens normally is that CHECKSUM_PARTIAL is set and skb->csum is calculated as needed. But this was only happening for TCP data packets (via the skb->ip_summed assignment done in tcp_sendmsg()). It doesn't happen for non-data packets like ACKs etc. Fix this by setting skb->ip_summed in the common non-data packet constructor. It already is setting skb->csum to zero. But this reminds us that we still have things like ip_output.c's ip_dev_loopback_xmit() which sets skb->ip_summed to the value CHECKSUM_UNNECESSARY, which Herbert's patch teaches us is not valid. So we'll have to address that at some point too. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-08udp: fix for unicast RX path optimizationJorge Boncompte [DTI2]2-4/+4
Commits 5051ebd275de672b807c28d93002c2fb0514a3c9 and 5051ebd275de672b807c28d93002c2fb0514a3c9 ("ipv[46]: udp: optimize unicast RX path") broke some programs. After upgrading a L2TP server to 2.6.33 it started to fail, tunnels going up an down, after the 10th tunnel came up. My modified rp-l2tp uses a global unconnected socket bound to (INADDR_ANY, 1701) and one connected socket per tunnel after parameter negotiation. After ten sockets were open and due to mixed parameters to udp[46]_lib_lookup2() kernel started to drop packets. Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07x.25 attempts to negotiate invalid throughputJohn Hughes2-7/+28
The current X.25 code has some bugs in throughput negotiation: 1. It does negotiation in all cases, usually there is no need 2. It incorrectly attempts to negotiate the throughput class in one direction only. There are separate throughput classes for input and output and if either is negotiated both mist be negotiates. This is bug https://bugzilla.kernel.org/show_bug.cgi?id=15681 This bug was first reported by Daniel Ferenci to the linux-x25 mailing list on 6/8/2004, but is still present. The current (2.6.34) x.25 code doesn't seem to know that the X.25 throughput facility includes two values, one for the required throughput outbound, one for inbound. This causes it to attempt to negotiate throughput 0x0A, which is throughput 9600 inbound and the illegal value "0" for inbound throughput. Because of this some X.25 devices (e.g. Cisco 1600) refuse to connect to Linux X.25. The following patch fixes this behaviour. Unless the user specifies a required throughput it does not attempt to negotiate. If the user does not specify a throughput it accepts the suggestion of the remote X.25 system. If the user requests a throughput then it validates both the input and output throughputs and correctly negotiates them with the remote end. Signed-off-by: John Hughes <john@calva.com> Tested-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07x25: Patch to fix bug 15678 - x25 accesses fields beyond end of packet.John Hughes3-6/+68
Here is a patch to stop X.25 examining fields beyond the end of the packet. For example, when a simple CALL ACCEPTED was received: 10 10 0f x25_parse_facilities was attempting to decode the FACILITIES field, but this packet contains no facilities field. Signed-off-by: John Hughes <john@calva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07bridge: Fix IGMP3 report parsingHerbert Xu1-1/+1
The IGMP3 report parsing is looking at the wrong address for group records. This patch fixes it. Reported-by: Banyeer <banyeer@yahoo.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07Merge branch 'master' of ↵David S. Miller4-9/+23
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-04-06mac80211: annotate station rcu dereferencesJohannes Berg2-6/+18
The new RCU lockdep support warns about these in some contexts -- make it aware of the locks used to protect all this. Different locks are used in different contexts which unfortunately means we can't get perfect checking. Also remove rcu_dereference() from two places that don't actually dereference the pointers. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06mac80211: Handle mesh action frames in ieee80211_rx_h_actionJavier Cardona2-3/+5
This fixes the problem introduced in commit 8404080568613d93ad7cf0a16dfb68 which broke mesh peer link establishment. changes: v2 Added missing break (Johannes) v3 Broke original patch into two (Johannes) Signed-off-by: Javier Cardona <javier@cozybit.com> Cc: stable@kernel.org Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds14-78/+80
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits) smc91c92_cs: fix the problem of "Unable to find hardware address" r8169: clean up my printk uglyness net: Hook up cxgb4 to Kconfig and Makefile cxgb4: Add main driver file and driver Makefile cxgb4: Add remaining driver headers and L2T management cxgb4: Add packet queues and packet DMA code cxgb4: Add HW and FW support code cxgb4: Add register, message, and FW definitions netlabel: Fix several rcu_dereference() calls used without RCU read locks bonding: fix potential deadlock in bond_uninit() net: check the length of the socket address passed to connect(2) stmmac: add documentation for the driver. stmmac: fix kconfig for crc32 build error be2net: fix bug in vlan rx path for big endian architecture be2net: fix flashing on big endian architectures be2net: fix a bug in flashing the redboot section bonding: bond_xmit_roundrobin() fix drivers/net: Add missing unlock net: gianfar - align BD ring size console messages net: gianfar - initialize per-queue statistics ...
2010-04-05Merge branch 'for-linus' of ↵Linus Torvalds1-4/+19
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9p: saving negative to unsigned char 9p: return on mutex_lock_interruptible() 9p: Creating files with names too long should fail with ENAMETOOLONG. 9p: Make sure we are able to clunk the cached fid on umount 9p: drop nlink remove fs/9p: Clunk the fid resulting from partial walk of the name 9p: documentation update 9p: Fix setting of protocol flags in v9fs_session_info structure.
2010-04-059p: saving negative to unsigned charDan Carpenter1-2/+3
Saving -EINVAL as unsigned char truncates the high bits and changes it into 234 instead of -22. This breaks the test for "if (ret == -EINVAL)" in parse_opts(). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-04-05svcrdma: RDMA support not yet compatible with RPC6Tom Tucker1-1/+4
RPC6 requires that it be possible to create endpoints that listen exclusively for IPv4 or IPv6 connection requests. This is not currently supported by the RDMA API. This fixes a server RDMA regression introduced by 37498292a "NFSD: Create PF_INET6 listener in write_ports". Signed-off-by: Tom Tucker<tom@opengridcomputing.com> Tested-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-04-059p: Make sure we are able to clunk the cached fid on umountAneesh Kumar K.V1-2/+16
dcache prune happen on umount. So we cannot mark the client satus disconnect. That will prevent a 9p call to the server Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-04-01netlabel: Fix several rcu_dereference() calls used without RCU read locksPaul Moore2-57/+37
The recent changes to add RCU lock verification to rcu_dereference() calls caught out a problem with netlbl_unlhsh_hash(), see below. =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- net/netlabel/netlabel_unlabeled.c:246 invoked rcu_dereference_check() without protection! This patch fixes this problem as well as others like it in the NetLabel code. Also included in this patch is the identification of future work to eliminate the RCU read lock in netlbl_domhsh_add(), but in the interest of getting this patch out quickly that work will happen in another patch to be finished later. Thanks to Eric Dumazet and Paul McKenney for their help in understanding the recent RCU changes. Signed-off-by: Paul Moore <paul.moore@hp.com> Reported-by: David Howells <dhowells@redhat.com> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-01net: check the length of the socket address passed to connect(2)Changli Gao7-3/+20
check the length of the socket address passed to connect(2). Check the length of the socket address passed to connect(2). If the length is invalid, -EINVAL will be returned. Signed-off-by: Changli Gao <xiaosuo@gmail.com> ---- net/bluetooth/l2cap.c | 3 ++- net/bluetooth/rfcomm/sock.c | 3 ++- net/bluetooth/sco.c | 3 ++- net/can/bcm.c | 3 +++ net/ieee802154/af_ieee802154.c | 3 +++ net/ipv4/af_inet.c | 5 +++++ net/netlink/af_netlink.c | 3 +++ 7 files changed, 20 insertions(+), 3 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-31Merge branch 'master' of ↵David S. Miller4-18/+22
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-03-30net: Fix oops from tcp_collapse() when using splice()Steven J. Magnani1-0/+1
tcp_read_sock() can have a eat skbs without immediately advancing copied_seq. This can cause a panic in tcp_collapse() if it is called as a result of the recv_actor dropping the socket lock. A userspace program that splices data from a socket to either another socket or to a file can trigger this bug. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-30mac80211: move netdev queue enabling to correct spotJohannes Berg2-6/+12
"mac80211: fix skb buffering issue" still left a race between enabling the hardware queues and the virtual interface queues. In hindsight it's totally obvious that enabling the netdev queues for a hardware queue when the hardware queue is enabled is wrong, because it could well possible that we can fill the hw queue with packets we already have pending. Thus, we must only enable the netdev queues once all the pending packets have been processed and sent off to the device. In testing, I haven't been able to trigger this race condition, but it's clearly there, possibly only when aggregation is being enabled. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-30mac80211: fix PREQ processing and one small bugPorsch, Marco1-2/+2
1st) a PREQ should only be processed, if it has the same SN and better metric (instead of better or equal). 2nd) next_hop[ETH_ALEN] now actually used to buffer mpath->next_hop->sta.addr for use out of lock. Signed-off-by: Marco Porsch <marco.porsch@siemens.com> Acked-by: Javier Cardona <javier@cozybit.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-30mac80211: correct typos in "unavailable upon resume" warningJohn W. Linville1-3/+3
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-30wireless: convert reg_regdb_search_lock to mutexJohn W. Linville1-7/+5
Stanse discovered that kmalloc is being called with GFP_KERNEL while holding this spinlock. The spinlock can be a mutex instead, which also enables the removal of the unlock/lock around the lock/unlock of cfg80211_mutex and the call to set_regdom. Reported-by: Jiri Slaby <jirislaby@gmail.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo469-20/+457
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 18:30:22 +0000