summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2009-08-13Make sock_sendpage() use kernel_sendpage()Linus Torvalds1-1/+1
kernel_sendpage() does the proper default case handling for when the socket doesn't have a native sendpage implementation. Now, arguably this might be something that we could instead solve by just specifying that all protocols should do it themselves at the protocol level, but we really only care about the common protocols. Does anybody really care about sendpage on something like Appletalk? Not likely. Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Julien TINNES <julien@cr0.org> Acked-by: Tavis Ormandy <taviso@sdf.lonestar.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds1-2/+0
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net: Fix spinlock use in alloc_netdev_mq()
2009-08-05net: Fix spinlock use in alloc_netdev_mq()Ingo Molnar1-2/+0
-tip testing found this lockdep warning: [ 2.272010] calling net_dev_init+0x0/0x164 @ 1 [ 2.276033] device class 'net': registering [ 2.280191] INFO: trying to register non-static key. [ 2.284005] the code is fine but needs lockdep annotation. [ 2.284005] turning off the locking correctness validator. [ 2.284005] Pid: 1, comm: swapper Not tainted 2.6.31-rc5-tip #1145 [ 2.284005] Call Trace: [ 2.284005] [<7958eb4e>] ? printk+0xf/0x11 [ 2.284005] [<7904f83c>] __lock_acquire+0x11b/0x622 [ 2.284005] [<7908c9b7>] ? alloc_debug_processing+0xf9/0x144 [ 2.284005] [<7904e2be>] ? mark_held_locks+0x3a/0x52 [ 2.284005] [<7908dbc4>] ? kmem_cache_alloc+0xa8/0x13f [ 2.284005] [<7904e475>] ? trace_hardirqs_on_caller+0xa2/0xc3 [ 2.284005] [<7904fdf6>] lock_acquire+0xb3/0xd0 [ 2.284005] [<79489678>] ? alloc_netdev_mq+0xf5/0x1ad [ 2.284005] [<79591514>] _spin_lock_bh+0x2d/0x5d [ 2.284005] [<79489678>] ? alloc_netdev_mq+0xf5/0x1ad [ 2.284005] [<79489678>] alloc_netdev_mq+0xf5/0x1ad [ 2.284005] [<793a38f2>] ? loopback_setup+0x0/0x74 [ 2.284005] [<798eecd0>] loopback_net_init+0x20/0x5d [ 2.284005] [<79483efb>] register_pernet_device+0x23/0x4b [ 2.284005] [<798f5c9f>] net_dev_init+0x115/0x164 [ 2.284005] [<7900104f>] do_one_initcall+0x4a/0x11a [ 2.284005] [<798f5b8a>] ? net_dev_init+0x0/0x164 [ 2.284005] [<79066f6d>] ? register_irq_proc+0x8c/0xa8 [ 2.284005] [<798cc29a>] do_basic_setup+0x42/0x52 [ 2.284005] [<798cc30a>] kernel_init+0x60/0xa1 [ 2.284005] [<798cc2aa>] ? kernel_init+0x0/0xa1 [ 2.284005] [<79003e03>] kernel_thread_helper+0x7/0x10 [ 2.284078] device: 'lo': device_add [ 2.288248] initcall net_dev_init+0x0/0x164 returned 0 after 11718 usecs [ 2.292010] calling neigh_init+0x0/0x66 @ 1 [ 2.296010] initcall neigh_init+0x0/0x66 returned 0 after 0 usecs it's using an zero-initialized spinlock. This is a side-effect of: dev_unicast_init(dev); in alloc_netdev_mq() making use of dev->addr_list_lock. The device has just been allocated freshly, it's not accessible anywhere yet so no locking is needed at all - in fact it's wrong to lock it here (the lock isnt initialized yet). This bug was introduced via: | commit a6ac65db2329e7685299666f5f7b6093c7b0f3a0 | Date: Thu Jul 30 01:06:12 2009 +0000 | | net: restore the original spinlock to protect unicast list Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jiri Pirko <jpirko@redhat.com> Tested-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds12-37/+79
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits) ehea: Fix napi list corruption on ifconfig down igbvf: Allow VF driver to correctly recognize failure to set mac 3c59x: Fix build failure with gcc 3.2 sky2: Avoid transmits during sky2_down() iwlagn: do not send key clear commands when rfkill enabled libertas: Read buffer overflow drivers/net/wireless: introduce missing kfree drivers/net/wireless/iwlwifi: introduce missing kfree zd1211rw: fix unaligned access in zd_mac_rx cfg80211: fix regression on beacon world roaming feature cfg80211: add two missing NULL pointer checks ixgbe: Patch to modify 82598 PCIe completion timeout values bluetooth: rfcomm_init bug fix mlx4_en: Fix double pci unmapping. mISDN: Fix handling of receive buffer size in L1oIP pcnet32: VLB support fixes pcnet32: remove superfluous NULL pointer check in pcnet32_probe1() net: restore the original spinlock to protect unicast list netxen: fix coherent dma mask setting mISDN: Read buffer overflow ...
2009-08-03Merge branch 'master' of ↵David S. Miller3-6/+10
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-08-03cfg80211: fix regression on beacon world roaming featureLuis R. Rodriguez2-5/+7
A regression was added through patch a4ed90d6: "cfg80211: respect API on orig_flags on channel for beacon hint" We did indeed respect _orig flags but the intention was not clearly stated in the commit log. This patch fixes firmware issues picked up by iwlwifi when we lift passive scan of beaconing restrictions on channels its EEPROM has been configured to always enable. By doing so though we also disallowed beacon hints on devices registering their wiphy with custom world regulatory domains enabled, this happens to be currently ath5k, ath9k and ar9170. The passive scan and beacon restrictions on those devices would never be lifted even if we did find a beacon and the hardware did support such enhancements when world roaming. Since Johannes indicates iwlwifi firmware cannot be changed to allow beacon hinting we set up a flag now to specifically allow drivers to disable beacon hints for devices which cannot use them. We enable the flag on iwlwifi to disable beacon hints and by default enable it for all other drivers. It should be noted beacon hints lift passive scan flags and beacon restrictions when we receive a beacon from an AP on any 5 GHz non-DFS channels, and channels 12-14 on the 2.4 GHz band. We don't bother with channels 1-11 as those channels are allowed world wide. This should fix world roaming for ath5k, ath9k and ar9170, thereby improving scan time when we receive the first beacon from any AP, and also enabling beaconing operation (AP/IBSS/Mesh) on cards which would otherwise not be allowed to do so. Drivers not using custom regulatory stuff (wiphy_apply_custom_regulatory()) were not affected by this as the orig_flags for the channels would have been cleared upon wiphy registration. I tested this with a world roaming ath5k card. Cc: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-03cfg80211: add two missing NULL pointer checksJohannes Berg1-1/+3
These pointers can be NULL, the is_mesh() case isn't ever hit in the current kernel, but cmp_ies() can be hit under certain conditions. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: stable@kernel.org [2.6.29, 2.6.30] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-03bluetooth: rfcomm_init bug fixDave Young2-9/+20
rfcomm tty may be used before rfcomm_tty_driver initilized, The problem is that now socket layer init before tty layer, if userspace program do socket callback right here then oops will happen. reporting in: http://marc.info/?l=linux-bluetooth&m=124404919324542&w=2 make 3 changes: 1. remove #ifdef in rfcomm/core.c, make it blank function when rfcomm tty not selected in rfcomm.h 2. tune the rfcomm_init error patch to ensure tty driver initilized before rfcomm socket usage. 3. remove __exit for rfcomm_cleanup_sockets because above change need call it in a __init function. Reported-by: Oliver Hartkopp <oliver@hartkopp.net> Tested-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-02net: restore the original spinlock to protect unicast listJiri Pirko1-9/+16
There is a path when an assetion in dev_unicast_sync() appears. igmp6_group_added -> dev_mc_add -> __dev_set_rx_mode -> -> vlan_dev_set_rx_mode -> dev_unicast_sync Therefore we cannot protect this list with rtnl. This patch restores the original protecting this list with spinlock. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-02net: net_assign_generic() fixEric Dumazet1-1/+1
memcpy() should take into account size of pointers, not only number of pointers to copy. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-30ipv4: ARP neigh procfs buffer overflowroel kluin1-1/+3
If arp_format_neigh_entry() can be called with n->dev->addr_len == 0, then a write to hbuffer[-1] occurs. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-30net/netlabel: Add kmalloc NULL testsJulia Lawall1-1/+1
The test on map4 should be a test on map6. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression *x; identifier f; constant char *C; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ... when != x == NULL when != x != NULL when != (x || ...) ( kfree(x) | f(...,C,...,x,...) | *f(...,x,...) | *x->f ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-30Merge branch 'master' of ↵David S. Miller3-10/+28
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-07-29net-dccp: suppress warning about large allocations from DCCPMel Gorman1-2/+2
The DCCP protocol tries to allocate some large hash tables during initialisation using the largest size possible. This can be larger than what the page allocator can provide so it prints a warning. However, the caller is able to handle the situation so this patch suppresses the warning. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-29mac80211: fix suspendJohannes Berg2-9/+27
Jan reported that his b43-based laptop hangs during suspend. The problem turned out to be mac80211 asking the driver to stop the hardware before removing interfaces, and interface removal caused b43 to touch the hardware (while down, which causes the hang). This patch fixes mac80211 to do reorder these operations to have them in the correct order -- first remove interfaces and then stop the hardware. Some more code is necessary to be able to do so in a race-free manner, in particular it is necessary to not process frames received during quiescing. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13337. Reported-by: Jan Scholz <scholz@fias.uni-frankfurt.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds10-38/+59
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (45 commits) cnic: Fix ISCSI_KEVENT_IF_DOWN message handling. net: irda: init spinlock after memcpy ixgbe: fix for 82599 errata marking UDP checksum errors r8169: WakeOnLan fix for the 8168 netxen: reset ring consumer during cleanup net/bridge: use kobject_put to release kobject in br_add_if error path smc91x.h: add config for Nomadik evaluation kit NET: ROSE: Don't use static buffer. eepro: Read buffer overflow tokenring: Read buffer overflow at1700: Read buffer overflow fealnx: Write outside array bounds ixgbe: remove unnecessary call to device_init_wakeup ixgbe: Don't priority tag control frames in DCB mode ixgbe: Enable FCoE offload when DCB is enabled for 82599 net: Rework mdio-ofgpio driver to use of_mdio infrastructure register at91_ether using platform_driver_probe skge: Enable WoL by default if supported net: KS8851 needs to depend on MII be2net: Bug fix in the non-lro path. Size of received packet was not updated in statistics properly. ...
2009-07-27mac80211: do not queue work after suspend in the dynamic ps timerLuis R. Rodriguez1-1/+1
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-27net: irda: init spinlock after memcpyDeepak Saxena1-0/+1
irttp_dup() copies a tsap_cb struct, but does not initialize the spinlock in the new structure, which confuses lockdep. Signed-off-by: Deepak Saxena <dsaxena@mvista.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26net/bridge: use kobject_put to release kobject in br_add_if error pathXiaotian Feng1-1/+1
kobject_init_and_add will alloc memory for kobj->name, so in br_add_if error path, simply use kobject_del will not free memory for kobj->name. Fix by using kobject_put instead, kobject_put will internally calls kobject_del and frees memory for kobj->name. Signed-off-by: Xiaotian Feng <dfeng@redhat.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26NET: ROSE: Don't use static buffer.Ralf Baechle2-21/+20
The use of a static buffer in rose2asc() to return its result is not threadproof and can result in corruption if multiple threads are trying to use one of the procfs files based on rose2asc(). Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds8-11/+53
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits) sky2: Avoid races in sky2_down drivers/net/mlx4: Adjust constant drivers/net: Move a dereference below a NULL test drivers/net: Move a dereference below a NULL test connector: maintainer/mail update. USB host CDC Phonet network interface driver macsonic, jazzsonic: fix oops on module unload macsonic: move probe function to .devinit.text can: switch carrier on if device was stopped while in bus-off state can: restart device even if dev_alloc_skb() fails can: sja1000: remove duplicated includes New device ID for sc92031 [1088:2031] 3c589_cs: re-initialize the multicast in the tc589_reset Fix error return for setsockopt(SO_TIMESTAMPING) netxen: fix thermal check and shutdown netxen: fix deadlock on dev close netxen: fix context deletion sequence net: Micrel KS8851 SPI network driver tcp: Use correct peer adr when copying MD5 keys tcp: Fix MD5 signature checking on IPv4 mapped sockets ...
2009-07-21cfg80211: double free in __cfg80211_scan_doneChristian Lamparter1-2/+1
This patch fixes a double free corruption in __cfg80211_scan_done: ================================================ BUG kmalloc-512: Object already free ------------------------------------------------ INFO: Allocated in load_elf_binary+0x18b/0x19af age=6 INFO: Freed in load_elf_binary+0x104e/0x19af age=5 INFO: Slab 0xffffea0001bae4c0 objects=14 used=7 INFO: Object 0xffff88007e8a9918 @offset=6424 fp=0xffff88007e8a9488 Bytes b4 0xffff88007e8a9908: 00 00 00 00 00 00 00 00 5a 5a [...] Pid: 28705, comm: rmmod Tainted: P C 2.6.31-rc2-wl #1 Call Trace: [<ffffffff810da9f4>] print_trailer+0x14e/0x16e [<ffffffff810daa56>] object_err+0x42/0x61 [<ffffffff810dbcd9>] __slab_free+0x2af/0x396 [<ffffffffa0ec9694>] ? wiphy_unregister+0x92/0x142 [cfg80211] [<ffffffff810dd5e3>] kfree+0x13c/0x17a [<ffffffffa0ec9694>] ? wiphy_unregister+0x92/0x142 [cfg80211] [<ffffffffa0ec9694>] wiphy_unregister+0x92/0x142 [cfg80211] [<ffffffffa0eed163>] ieee80211_unregister_hw+0xc8/0xff [mac80211] [<ffffffffa0f3fbc8>] p54_unregister_common+0x31/0x66 [p54common] [...] FIX kmalloc-512: Object at 0xffff88007e8a9918 not freed The code path which leads to the *funny* double free: request = rdev->scan_req; dev = dev_get_by_index(&init_net, request->ifidx); /* * the driver was unloaded recently and * therefore dev_get_by_index will return NULL! */ if (!dev) goto out; [...] rdev->scan_req = NULL; /* not executed... */ [...] out: kfree(request); Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-21nl80211: Memory leak fixedNiko Jokinen1-2/+3
Potential memory leak via msg pointer in nl80211_get_key() function. Signed-off-by: Niko Jokinen <ext-niko.k.jokinen@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-21mac80211: use correct address for mesh Path ErrorJavier Cardona1-3/+5
For forwarded frames, we save the precursor address in addr1 in case it needs to be used to send a Path Error. mesh_path_discard_frame, however, was using addr2 instead of addr1 to send Path Error frames, so correct that and also make the comment regarding this more clear. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-21rfkill: fix rfkill_set_states() to set the hw stateAlan Jenkins1-0/+4
The point of this function is to set the software and hardware state at the same time. When I tried to use it, I found it was only setting the software state. Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-21mac80211: fix injection in monitor modePavel Roskin1-1/+1
The location of the 802.11 header is calculated incorrectly due to a wrong placement of parentheses. Found by kmemcheck. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-21rfkill: allow toggling soft state in sysfs againJohannes Berg1-8/+19
Apparently there actually _are_ tools that try to set this in sysfs even though it wasn't supposed to be used this way without claiming first. Guess what: now that I've cleaned it all up it doesn't matter and we can simply allow setting the soft-block state in sysfs. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-By: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-21mac80211: disable meshJohannes Berg2-0/+4
My kvm instance was complaining a lot about sleeping in atomic contexts in the mesh code, and it turns out that both mesh_path_add() and mpp_path_add() need to be able to sleep (they even use synchronize_rcu()!). I put in a might_sleep() to annotate that, but I see no way, at least right now, of actually making sure those functions are only called from process context since they are both called during TX and RX and the mesh code itself even calls them with rcu_read_lock() "held". Therefore, let's disable it completely for now. It's possible that I'm only seeing this because the hwsim's beaconing is broken and thus the peers aren't discovered right away, but it is possible that this happens even if beaconing is working, for a peer that doesn't exist or so. It should be possible to solve this by deferring the freeing of the tables to call_rcu() instead of using synchronize_rcu(), and also using atomic allocations, but maybe it makes more sense to rework the code to not call these from atomic contexts and defer more of the work to the workqueue. Right now, I can't work on either of those solutions though. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-20Fix error return for setsockopt(SO_TIMESTAMPING)Rémi Denis-Courmont1-1/+1
I guess it should be -EINVAL rather than EINVAL. I have not checked when the bug came in. Perhaps a candidate for -stable? Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-20tcp: Use correct peer adr when copying MD5 keysJohn Dykstra2-2/+2
When the TCP connection handshake completes on the passive side, a variety of state must be set up in the "child" sock, including the key if MD5 authentication is being used. Fix TCP for both address families to label the key with the peer's destination address, rather than the address from the listening sock, which is usually the wildcard. Reported-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Dykstra <john.dykstra1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-20tcp: Fix MD5 signature checking on IPv4 mapped socketsJohn Dykstra3-1/+3
Fix MD5 signature checking so that an IPv4 active open to an IPv6 socket can succeed. In particular, use the correct address family's signature generation function for the SYN/ACK. Reported-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Dykstra <john.dykstra1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-16net: sock_copy() fixesEric Dumazet1-2/+18
Commit e912b1142be8f1e2c71c71001dc992c6e5eb2ec1 (net: sk_prot_alloc() should not blindly overwrite memory) took care of not zeroing whole new socket at allocation time. sock_copy() is another spot where we should be very careful. We should not set refcnt to a non null value, until we are sure other fields are correctly setup, or a lockless reader could catch this socket by mistake, while not fully (re)initialized. This patch puts sk_node & sk_refcnt to the very beginning of struct sock to ease sock_copy() & sk_prot_alloc() job. We add appropriate smp_wmb() before sk_refcnt initializations to match our RCU requirements (changes to sock keys should be committed to memory before sk_refcnt setting) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-16Merge branch 'master' of ↵David S. Miller2-5/+21
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6
2009-07-16netfilter: nf_conntrack: nf_conntrack_alloc() fixesEric Dumazet1-3/+18
When a slab cache uses SLAB_DESTROY_BY_RCU, we must be careful when allocating objects, since slab allocator could give a freed object still used by lockless readers. In particular, nf_conntrack RCU lookups rely on ct->tuplehash[xxx].hnnode.next being always valid (ie containing a valid 'nulls' value, or a valid pointer to next object in hash chain.) kmem_cache_zalloc() setups object with NULL values, but a NULL value is not valid for ct->tuplehash[xxx].hnnode.next. Fix is to call kmem_cache_alloc() and do the zeroing ourself. As spotted by Patrick, we also need to make sure lookup keys are committed to memory before setting refcount to 1, or a lockless reader could get a reference on the old version of the object. Its key re-check could then pass the barrier. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-07-16netfilter: xt_osf: fix nf_log_packet() argumentsPatrick McHardy1-2/+3
The first argument is the address family, the second one the hook number. Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-07-15net/can: add module alias to can protocol driversLothar Waßmann2-0/+2
Add appropriate MODULE_ALIAS() to facilitate autoloading of can protocol drivers Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Acked-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-15net/can bugfix: use after free bug in can protocol driversLothar Waßmann2-0/+6
Fix a use after free bug in can protocol drivers The release functions of the can protocol drivers lack a call to sock_orphan() which leads to referencing freed memory under certain circumstances. This patch fixes a bug reported here: https://lists.berlios.de/pipermail/socketcan-users/2009-July/000985.html Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Acked-by: Oliver Hartkopp <oliver@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-149p: Possible regression in p9_client_statAbhishek Kulkarni1-5/+2
Fix a possible regression with p9_client_stat where it can try to kfree an ERR_PTR after an erroneous p9pdu_readf. Also remove an unnecessary data buffer increment in p9_client_read. Signed-off-by: Abhishek Kulkarni <adkulkar@umail.iu.edu> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2009-07-149p: default 9p transport module fixAbhishek Kulkarni1-3/+3
The default 9p transport module is not chosen unless an option parameter (any) is passed to mount, which thus returns a ENOPROTOSUPPORT. This fix moves the check out of parse_opts into p9_client_create. Signed-off-by: Abhishek Kulkarni <adkulkar@umail.iu.edu> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2009-07-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds5-6/+20
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: Revert "NET: Fix locking issues in PPP, 6pack, mkiss and strip line disciplines." skbuff.h: Fix comment for NET_IP_ALIGN drivers/net: using spin_lock_irqsave() in net_send_packet() NET: phy_device, fix lock imbalance gre: fix ToS/DiffServ inherit bug igb: gcc-3.4.6 fix atlx: duplicate testing of MCAST flag NET: Fix locking issues in PPP, 6pack, mkiss and strip line disciplines. netdev: restore MTU change operation netdev: restore MAC address set and validate operations sit: fix regression: do not release skb->dst before xmit net: ip_push_pending_frames() fix net: sk_prot_alloc() should not blindly overwrite memory
2009-07-14gre: fix ToS/DiffServ inherit bugAndreas Jaggi1-2/+2
Fixes two bugs: - ToS/DiffServ inheritance was unintentionally activated when using impair fixed ToS values - ECN bit was lost during ToS/DiffServ inheritance Signed-off-by: Andreas Jaggi <aj@open.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-12headers: smp_lock.h reduxAlexey Dobriyan10-3/+7
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-11sit: fix regression: do not release skb->dst before xmitSascha Hlusiak1-0/+1
The sit module makes use of skb->dst in it's xmit function, so since 93f154b594fe47 ("net: release dst entry in dev_hard_start_xmit()") sit tunnels are broken, because the flag IFF_XMIT_DST_RELEASE is not unset. This patch unsets that flag for sit devices to fix this regression. Signed-off-by: Sascha Hlusiak <contact@saschahlusiak.de> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-11net: ip_push_pending_frames() fixEric Dumazet2-2/+0
After commit 2b85a34e911bf483c27cfdd124aeb1605145dc80 (net: No more expensive sock_hold()/sock_put() on each tx) we do not take any more references on sk->sk_refcnt on outgoing packets. I forgot to delete two __sock_put() from ip_push_pending_frames() and ip6_push_pending_frames(). Reported-by: Emil S Tantilov <emils.tantilov@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Emil S Tantilov <emils.tantilov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-11net: sk_prot_alloc() should not blindly overwrite memoryEric Dumazet1-2/+17
Some sockets use SLAB_DESTROY_BY_RCU, and our RCU code correctness depends on sk->sk_nulls_node.next being always valid. A NULL value is not allowed as it might fault a lockless reader. Current sk_prot_alloc() implementation doesnt respect this hypothesis, calling kmem_cache_alloc() with __GFP_ZERO. Just call memset() around the forbidden field. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-09net: adding memory barrier to the poll and receive callbacksJiri Olsa9-19/+19
Adding memory barrier after the poll_wait function, paired with receive callbacks. Adding fuctions sock_poll_wait and sk_has_sleeper to wrap the memory barrier. Without the memory barrier, following race can happen. The race fires, when following code paths meet, and the tp->rcv_nxt and __add_wait_queue updates stay in CPU caches. CPU1 CPU2 sys_select receive packet ... ... __add_wait_queue update tp->rcv_nxt ... ... tp->rcv_nxt check sock_def_readable ... { schedule ... if (sk->sk_sleep && waitqueue_active(sk->sk_sleep)) wake_up_interruptible(sk->sk_sleep) ... } If there was no cache the code would work ok, since the wait_queue and rcv_nxt are opposit to each other. Meaning that once tp->rcv_nxt is updated by CPU2, the CPU1 either already passed the tp->rcv_nxt check and sleeps, or will get the new value for tp->rcv_nxt and will return with new data mask. In both cases the process (CPU1) is being added to the wait queue, so the waitqueue_active (CPU2) call cannot miss and will wake up CPU1. The bad case is when the __add_wait_queue changes done by CPU1 stay in its cache, and so does the tp->rcv_nxt update on CPU2 side. The CPU1 will then endup calling schedule and sleep forever if there are no more data on the socket. Calls to poll_wait in following modules were ommited: net/bluetooth/af_bluetooth.c net/irda/af_irda.c net/irda/irnet/irnet_ppp.c net/mac80211/rc80211_pid_debugfs.c net/phonet/socket.c net/rds/af_rds.c net/rfkill/core.c net/sunrpc/cache.c net/sunrpc/rpc_pipe.c net/tipc/socket.c Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-08netpoll: Fix carrier detection for drivers that are using phylibAnton Vorontsov1-1/+1
Using early netconsole and gianfar driver this error pops up: netconsole: timeout waiting for carrier It appears that net/core/netpoll.c:netpoll_setup() is using cond_resched() in a loop waiting for a carrier. The thing is that cond_resched() is a no-op when system_state != SYSTEM_RUNNING, and so drivers/net/phy/phy.c's state_queue is never scheduled, therefore link detection doesn't work. I belive that the main problem is in cond_resched()[1], but despite how the cond_resched() story ends, it might be a good idea to call msleep(1) instead of cond_resched(), as suggested by Andrew Morton. [1] http://lkml.org/lkml/2009/7/7/463 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-08Merge branch 'master' of ↵David S. Miller4-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-07-08ipv4: Fix fib_trie rebalancing, part 4 (root thresholds)Jarek Poplawski1-2/+2
Pawel Staszewski wrote: <blockquote> Some time ago i report this: http://bugzilla.kernel.org/show_bug.cgi?id=6648 and now with 2.6.29 / 2.6.29.1 / 2.6.29.3 and 2.6.30 it back dmesg output: oprofile: using NMI interrupt. Fix inflate_threshold_root. Now=15 size=11 bits ... Fix inflate_threshold_root. Now=15 size=11 bits cat /proc/net/fib_triestat Basic info: size of leaf: 40 bytes, size of tnode: 56 bytes. Main: Aver depth: 2.28 Max depth: 6 Leaves: 276539 Prefixes: 289922 Internal nodes: 66762 1: 35046 2: 13824 3: 9508 4: 4897 5: 2331 6: 1149 7: 5 9: 1 18: 1 Pointers: 691228 Null ptrs: 347928 Total size: 35709 kB </blockquote> It seems, the current threshold for root resizing is too aggressive, and it causes misleading warnings during big updates, but it might be also responsible for memory problems, especially with non-preempt configs, when RCU freeing is delayed long after call_rcu. It should be also mentioned that because of non-atomic changes during resizing/rebalancing the current lookup algorithm can miss valid leaves so it's additional argument to shorten these activities even at a cost of a minimally longer searching. This patch restores values before the patch "[IPV4]: fib_trie root node settings", commit: 965ffea43d4ebe8cd7b9fee78d651268dd7d23c5 from v2.6.22. Pawel's report: <blockquote> I dont see any big change of (cpu load or faster/slower routing/propagating routes from bgpd or something else) - in avg there is from 2% to 3% more of CPU load i dont know why but it is - i change from "preempt" to "no preempt" 3 times and check this my "mpstat -P ALL 1 30" always avg cpu load was from 2 to 3% more compared to "no preempt" [...] cat /proc/net/fib_triestat Basic info: size of leaf: 20 bytes, size of tnode: 36 bytes. Main: Aver depth: 2.44 Max depth: 6 Leaves: 277814 Prefixes: 291306 Internal nodes: 66420 1: 32737 2: 14850 3: 10332 4: 4871 5: 2313 6: 942 7: 371 8: 3 17: 1 Pointers: 599098 Null ptrs: 254865 Total size: 18067 kB </blockquote> According to this and other similar reports average depth is slightly increased (~0.2), and root nodes are shorter (log 17 vs. 18), but there is no visible performance decrease. So, until memory handling is improved or added parameters for changing this individually, this patch resets to safer defaults. Reported-by: Pawel Staszewski <pstaszewski@itcare.pl> Reported-by: Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Tested-by: Pawel Staszewski <pstaszewski@itcare.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-07mac80211: minstrel: avoid accessing negative indices in rix_to_ndx()Luciano Coelho1-1/+4
If rix is not found in mi->r[], i will become -1 after the loop. This value is eventually used to access arrays, so we were accessing arrays with a negative index, which is obviously not what we want to do. This patch fixes this potential problem. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 01:53:09 +0000