summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2010-02-15netfilter: CONFIG_COMPAT: allow delta to exceed 32767Florian Westphal1-3/+3
with 32 bit userland and 64 bit kernels, it is unlikely but possible that insertion of new rules fails even tough there are only about 2000 iptables rules. This happens because the compat delta is using a short int. Easily reproducible via "iptables -m limit" ; after about 2050 rules inserting new ones fails with -ELOOP. Note that compat_delta included 2 bytes of padding on x86_64, so structure size remains the same. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-15netfilter: ebtables: avoid explicit XT_ALIGN() in match/targetsFlorian Westphal17-17/+17
This will cause trouble once CONFIG_COMPAT support is added to ebtables. xt_compat_*_offset() calculate the kernel/userland structure size delta using: XT_ALIGN(size) - COMPAT_XT_ALIGN(size) If the match/target sizes are aligned at registration time, delta is always zero. Should have zero effect for existing systems: xtables uses XT_ALIGN() whenever it deals with match/target sizes. Signed-off-by: Florian Westphal <fwestphal@astaro.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-15netfilter: ebtables: abort if next_offset is too smallFlorian Westphal1-0/+2
next_offset must be > 0, otherwise this loops forever. The offset also contains the size of the ebt_entry structure itself, so anything smaller is invalid. Signed-off-by: Florian Westphal <fwestphal@astaro.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-15netfilter: ctnetlink: add zone supportPatrick McHardy1-19/+73
Parse and dump the conntrack zone in ctnetlink. Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-15netfilter: nf_conntrack: add support for "conntrack zones"Patrick McHardy17-78/+193
Normally, each connection needs a unique identity. Conntrack zones allow to specify a numerical zone using the CT target, connections in different zones can use the same identity. Example: iptables -t raw -A PREROUTING -i veth0 -j CT --zone 1 iptables -t raw -A OUTPUT -o veth1 -j CT --zone 1 Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-15netfilter: nf_conntrack: pass template to l4proto ->error() handlerPatrick McHardy7-9/+13
The error handlers might need the template to get the conntrack zone introduced in the next patches to perform a conntrack lookup. Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-15netfilter: xtables: add const qualifiersJan Engelhardt4-136/+168
This should make it easier to remove redundant arguments later. Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-02-15netfilter: xtables: constify args in compat copying functionsJan Engelhardt7-16/+16
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-02-15netfilter: xtables: print details on size mismatchJan Engelhardt1-2/+6
Print which revision has been used and which size are which (kernel/user) for easier debugging. Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-02-15netfilter: iptables: remove unused function argumentsJan Engelhardt2-14/+6
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2010-02-15netfilter: xt_recent: inform user when hitcount is too largeJan Engelhardt1-2/+6
It is one of these things that iptables cannot catch and which can cause "Invalid argument" to be printed. Without a hint in dmesg, it is not going to be helpful. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-14mac80211: Fix error introduced in netdev_mc_count() changes.David S. Miller1-1/+1
Commit 4cd24eaf0c6ee7f0242e34ee77ec899f255e66b5 ("net: use netdev_mc_count and netdev_mc_empty when appropriate") added this hunk to net/mac80211/iface.c: __dev_addr_unsync(&local->mc_list, &local->mc_count, - &dev->mc_list, &dev->mc_count); + &dev->mc_list, dev->mc_count); which is definitely not correct, introduced a warning (reported by Stephen Rothwell): net/mac80211/iface.c: In function 'ieee80211_stop': net/mac80211/iface.c:416: warning: passing argument 4 of '__dev_addr_unsync' makes pointer from integer without a cast include/linux/netdevice.h:1967: note: expected 'int *' but argument is of type 'int' and is thus reverted here. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-14net: Fix first line of kernel-doc for a few functionsBen Hutchings1-1/+1
The function name must be followed by a space, hypen, space, and a short description. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-14Merge branch 'master' of ↵David S. Miller3-5/+6
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/mac80211/rate.c
2010-02-14Merge branch 'master' of ↵David S. Miller20-636/+847
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-02-14Merge branch 'master' of ↵David S. Miller1-0/+3
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-02-12rtnetlink: Add VF config code to rtnetlinkWilliams, Mitch A1-0/+67
Add code to allow rtnetlink clients to query and set VF information through the PF driver. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12udp: remove redundant variableGerrit Renker2-16/+14
The variable 'copied' is used in udp_recvmsg() to emphasize that the passed 'len' is adjusted to fit the actual datagram length. But the same can be done by adjusting 'len' directly. This patch thus removes the indirection. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12dccp: support for passing MSG_TRUNCGerrit Renker1-0/+2
DCCP is datagram-oriented but lacks UDP's support for MSG_TRUNC as defined in recvmsg(2)/recv(2). Hence the following 'Hello world\0' receiver len = recv(fd, buf, 10, MSG_PEEK | MSG_TRUNC); wrongly (always) returns 10, while in UDP it returns 12 as expected. This patch adds the missing MSG_TRUNC support to recvmsg(). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12xfrm: validate attributesjamal1-0/+4
Some XFRM attributes were not going through basic validation. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12IPv6: remove trivial nested _bh suffixstephen hemminger1-10/+11
Don't need to disable bottom half it is already down in the previous lock. Move some blank lines to group locking in same context. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12IPv6: keep permanent addresses on admin downstephen hemminger1-11/+24
Permanent IPV6 addresses should not be removed when the link is set to admin down, only when device is removed. When link is lost permanent addresses should be marked as tentative so that when link comes back they are subject to duplicate address detection (if DAD was enabled for that address). Other routing systems keep manually configured IPv6 addresses when link is set down. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12ipv6: fib: fix crash when changing large fib while dumping itPatrick McHardy1-2/+27
When the fib size exceeds what can be dumped in a single skb, the dump is suspended and resumed once the last skb has been received by userspace. When the fib is changed while the dump is suspended, the walker might contain stale pointers, causing a crash when the dump is resumed. BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: [<ffffffffa01bce04>] fib6_walk_continue+0xbb/0x124 [ipv6] PGD 5347a067 PUD 65c7067 PMD 0 Oops: 0000 [#1] PREEMPT SMP ... RIP: 0010:[<ffffffffa01bce04>] [<ffffffffa01bce04>] fib6_walk_continue+0xbb/0x124 [ipv6] ... Call Trace: [<ffffffff8104aca3>] ? mutex_spin_on_owner+0x59/0x71 [<ffffffffa01bd105>] inet6_dump_fib+0x11b/0x1b9 [ipv6] [<ffffffff81371af4>] netlink_dump+0x5b/0x19e [<ffffffff8134f288>] ? consume_skb+0x28/0x2a [<ffffffff81373b69>] netlink_recvmsg+0x1ab/0x2c6 [<ffffffff81372781>] ? netlink_unicast+0xfa/0x151 [<ffffffff813483e0>] __sock_recvmsg+0x6d/0x79 [<ffffffff81348a53>] sock_recvmsg+0xca/0xe3 [<ffffffff81066d4b>] ? autoremove_wake_function+0x0/0x38 [<ffffffff811ed1f8>] ? radix_tree_lookup_slot+0xe/0x10 [<ffffffff810b3ed7>] ? find_get_page+0x90/0xa5 [<ffffffff810b5dc5>] ? filemap_fault+0x201/0x34f [<ffffffff810ef152>] ? fget_light+0x2f/0xac [<ffffffff813519e7>] ? verify_iovec+0x4f/0x94 [<ffffffff81349a65>] sys_recvmsg+0x14d/0x223 Store the serial number when beginning to walk the fib and reload pointers when continuing to walk after a change occured. Similar to other dumping functions, this might cause unrelated entries to be missed when entries are deleted. Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12mac80211: fix handling of null-rate control in rate_control_get_rateJuuso Oikarinen1-0/+3
For hardware with IEEE80211_HW_HAS_RATE_CONTROL the rate controller is not initialized. However, calling functions such as ieee80211_beacon_get result in the rate_control_get_rate function getting called, which is accessing (in this case uninitialized) rate control structures unconditionally. Fix by exiting the function before setting the rates for HW with IEEE80211_HW_HAS_RATE_CONTROL set. The initialization of the ieee80211_tx_info struct is intentionally still executed. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Kalle Valo <kalle.valo@nokia.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-12dccp: allow probing of CCID-array lengthGerrit Renker1-5/+4
This fixes a problem in the DCCP getsockopt() API: currently there is no way for a user to a priori know the number of built-in CCIDs, other than trying DCCP_SOCKOPT_AVAILABLE_CCIDS in a loop, incrementing the option length until EINVAL is no longer returned. This patch truncates the array to the user-provided length. No copy is made when the length is <= 0. Due to the length restriction in do_dccp_getsockopt() to sizeof(int), the minimum array length remains 4, which is a reasonable default (only 3 CCIDs, CCID-2..4, are currently defined). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12inet: Remove bogus IGMPv3 report handlingHerbert Xu1-1/+1
Currently we treat IGMPv3 reports as if it were an IGMPv2/v1 report. This is broken as IGMPv3 reports are formatted differently. So we end up suppressing a bogus multicast group (which should be harmless as long as the leading reserved field is zero). In fact, IGMPv3 does not allow membership report suppression so we should simply ignore IGMPv3 membership reports as a host. This patch does exactly that. I kept the case statement for it so people won't accidentally add it back thinking that we overlooked this case. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12net: use netdev_mc_count and netdev_mc_empty when appropriateJiri Pirko4-6/+9
This patch replaces dev->mc_count in all drivers (hopefully I didn't miss anything). Used spatch and did small tweaks and conding style changes when it was suitable. Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12netfilter: don't use INIT_RCU_HEAD()Alexey Dobriyan3-3/+0
call_rcu() will unconditionally reinitialize RCU head anyway. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-11ethtool: Use explicit designated initializers for .cmdRoland Dreier1-5/+5
Initialize the .cmd member of various ethtool using a designated struct initializer rather. This makes things a teeny bit more robust, although the chance of a struct layout changing is extremely remote, and also makes the code a little easier to read. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-11netfilter: xtables: fix mangle tablesAlexey Dobriyan2-2/+6
In POST_ROUTING hook, calling dev_net(in) is going to oops. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-11netfilter: nf_conntrack_sip: add T.38 FAX supportPatrick McHardy1-5/+23
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-11netfilter: nf_nat_sip: add TCP supportPatrick McHardy2-6/+57
Add support for mangling TCP SIP packets. Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-11netfilter: nf_nat: support mangling a single TCP packet multiple timesPatrick McHardy1-16/+23
nf_nat_mangle_tcp_packet() can currently only handle a single mangling per window because it only maintains two sequence adjustment positions: the one before the last adjustment and the one after. This patch makes sequence number adjustment tracking in nf_nat_mangle_tcp_packet() optional and allows a helper to manually update the offsets after the packet has been fully handled. Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-11netfilter: nf_conntrack_sip: add TCP supportPatrick McHardy2-30/+177
Add TCP support, which is mandated by RFC3261 for all SIP elements. SIP over TCP is similar to UDP, except that messages are delimited by Content-Length: headers and multiple messages may appear in one packet. Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-11netfilter: nf_conntrack_sip: pass data offset to NAT functionsPatrick McHardy2-88/+95
When using TCP multiple SIP messages might be present in a single packet. A following patch will parse them by setting the dptr to the beginning of each message. The NAT helper needs to reload the dptr value after mangling the packet however, so it needs to know the offset of the message to the beginning of the packet. Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-11netfilter: nf_conntrack_sip: fix ct_sip_parse_request() REGISTER request parsingPatrick McHardy1-3/+4
When requests are parsed, the "sip:" part of the SIP URI should be skipped. Usually this doesn't matter because address parsing skips forward until after the username part, but in case REGISTER requests it doesn't contain a username and the address can not be parsed. Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-11netfilter: nf_conntrack: show helper and class in /proc/net/nf_conntrack_expectPatrick McHardy2-0/+12
Make the output a bit more informative by showing the helper an expectation belongs to and the expectation class. Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-11netfilter: ctnetlink: dump expectation helper namePatrick McHardy1-0/+4
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-02-10ethtool: Introduce n-tuple filter programming supportPeter P Waskiewicz Jr2-1/+333
This patchset enables the ethtool layer to program n-tuple filters to an underlying device. The idea is to allow capable hardware to have static rules applied that can assist steering flows into appropriate queues. Hardware that is known to support these types of filters today are ixgbe and niu. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-10tcp: fix ICMP-RTO warDamian Lukowski1-4/+2
Make sure, that TCP has a nonzero RTT estimation after three-way handshake. Currently, a listening TCP has a value of 0 for srtt, rttvar and rto right after the three-way handshake is completed with TCP timestamps disabled. This will lead to corrupt RTO recalculation and retransmission flood when RTO is recalculated on backoff reversion as introduced in "Revert RTO on ICMP destination unreachable" (f1ecd5d9e7366609d640ff4040304ea197fbc618). This behaviour can be provoked by connecting to a server which "responds first" (like SMTP) and rejecting every packet after the handshake with dest-unreachable, which will lead to softirq load on the server (up to 30% per socket in some tests). Thanks to Ilpo Jarvinen for providing debug patches and to Denys Fedoryshchenko for reporting and testing. Changes since v3: Removed bad characters in patchfile. Reported-by: Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: Damian Lukowski <damian@tvk.rwth-aachen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-10mac80211: Deny TX BA session requests during disassociationSujith3-1/+15
In associated state, when bringing an interface down, existing BA sessions are torn down. When this is in progress, nothing prevents mac80211 from accepting another BA session start request. Use a new station flag to fix this. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-10Merge branch 'master' of ↵David S. Miller2-9/+11
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-02-10net: atm: use seq_list_foo() helpersLi Zefan2-17/+3
Simplify seq_file code. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-10net: ipx: use seq_list_foo() helpersLi Zefan1-78/+12
Simplify seq_file code. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-10net: irda: use seq_list_foo() helpersLi Zefan1-24/+4
Simplify seq_file code. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-10net: x25: use seq_list_foo() helpersLi Zefan1-76/+8
Simplify seq_file code. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-10net: af_key: use seq_hlist_foo() helpersLi Zefan1-17/+3
Simplify seq_file code. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-10net: appletalk: use seq_hlist_foo() helpersLi Zefan1-27/+3
Simplify seq_file code. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-10net: ax25: use seq_hlist_foo() helpersLi Zefan2-36/+7
Simplify seq_file code. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-10net: netrom: use seq_hlist_foo() helpersLi Zefan2-62/+12
Simplify seq_file code. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 02:38:40 +0000