summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2010-11-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds24-91/+120
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (41 commits) inet_diag: Make sure we actually run the same bytecode we audited. netlink: Make nlmsg_find_attr take a const nlmsghdr*. fib: fib_result_assign() should not change fib refcounts netfilter: ip6_tables: fix information leak to userspace cls_cgroup: Fix crash on module unload memory corruption in X.25 facilities parsing net dst: fix percpu_counter list corruption and poison overwritten rds: Remove kfreed tcp conn from list rds: Lost locking in loop connection freeing de2104x: fix panic on load atl1 : fix panic on load netxen: remove unused firmware exports caif: Remove noisy printout when disconnecting caif socket caif: SPI-driver bugfix - incorrect padding. caif: Bugfix for socket priority, bindtodev and dbg channel. smsc911x: Set Ethernet EEPROM size to supported device's size ipv4: netfilter: ip_tables: fix information leak to userland ipv4: netfilter: arp_tables: fix information leak to userland cxgb4vf: remove call to stop TX queues at load time. cxgb4: remove call to stop TX queues at load time. ...
2010-11-04inet_diag: Make sure we actually run the same bytecode we audited.Nelson Elhage1-11/+16
We were using nlmsg_find_attr() to look up the bytecode by attribute when auditing, but then just using the first attribute when actually running bytecode. So, if we received a message with two attribute elements, where only the second had type INET_DIAG_REQ_BYTECODE, we would validate and run different bytecode strings. Fix this by consistently using nlmsg_find_attr everywhere. Signed-off-by: Nelson Elhage <nelhage@ksplice.com> Signed-off-by: Thomas Graf <tgraf@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-04fib: fib_result_assign() should not change fib refcountsEric Dumazet1-4/+1
After commit ebc0ffae5 (RCU conversion of fib_lookup()), fib_result_assign() should not change fib refcounts anymore. Thanks to Michael who did the bisection and bug report. Reported-by: Michael Ellerman <michael@ellerman.id.au> Tested-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-03netfilter: ip6_tables: fix information leak to userspaceJan Engelhardt1-0/+1
Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-03Merge branch 'master' of ↵David S. Miller5-21/+30
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6
2010-11-03cls_cgroup: Fix crash on module unloadHerbert Xu1-2/+0
Somewhere along the lines net_cls_subsys_id became a macro when cls_cgroup is built as a module. Not only did it make cls_cgroup completely useless, it also causes it to crash on module unload. This patch fixes this by removing that macro. Thanks to Eric Dumazet for diagnosing this problem. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-03memory corruption in X.25 facilities parsingandrew hendry2-4/+6
Signed-of-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-03net dst: fix percpu_counter list corruption and poison overwrittenXiaotian Feng1-0/+2
There're some percpu_counter list corruption and poison overwritten warnings in recent kernel, which is resulted by fc66f95c. commit fc66f95c switches to use percpu_counter, in ip6_route_net_init, kernel init the percpu_counter for dst entries, but, the percpu_counter is never destroyed in ip6_route_net_exit. So if the related data is freed by kernel, the freed percpu_counter is still on the list, then if we insert/remove other percpu_counter, list corruption resulted. Also, if the insert/remove option modifies the ->prev,->next pointer of the freed value, the poison overwritten is resulted then. With the following patch, the percpu_counter list corruption and poison overwritten warnings disappeared. Signed-off-by: Xiaotian Feng <dfeng@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: "Pekka Savola (ipv6)" <pekkas@netcore.fi> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-03rds: Remove kfreed tcp conn from listPavel Emelyanov1-0/+6
All the rds_tcp_connection objects are stored list, but when being freed it should be removed from there. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-03rds: Lost locking in loop connection freeingPavel Emelyanov1-0/+4
The conn is removed from list in there and this requires proper lock protection. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-03caif: Remove noisy printout when disconnecting caif socketsjur.brandeland@stericsson.com1-2/+1
Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-03caif: Bugfix for socket priority, bindtodev and dbg channel.André Carvalho de Matos6-44/+49
Changes: o Bugfix: SO_PRIORITY for SOL_SOCKET could not be handled in caif's setsockopt, using the struct sock attribute priority instead. o Bugfix: SO_BINDTODEVICE for SOL_SOCKET could not be handled in caif's setsockopt, using the struct sock attribute ifindex instead. o Wrong assert statement for RFM layer segmentation. o CAIF Debug channels was not working over SPI, caif_payload_info containing padding info must be initialized. o Check on pointer before dereferencing when unregister dev in caif_dev.c Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-03ipv4: netfilter: ip_tables: fix information leak to userlandVasiliy Kulikov1-0/+1
Structure ipt_getinfo is copied to userland with the field "name" that has the last elements unitialized. It leads to leaking of contents of kernel stack memory. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-11-03ipv4: netfilter: arp_tables: fix information leak to userlandVasiliy Kulikov1-0/+1
Structure arpt_getinfo is copied to userland with the field "name" that has the last elements unitialized. It leads to leaking of contents of kernel stack memory. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-11-01net: check queue_index from sock is valid for deviceTom Herbert1-1/+1
In dev_pick_tx recompute the queue index if the value stored in the socket is greater than or equal to the number of real queues for the device. The saved index in the sock structure is not guaranteed to be appropriate for the egress device (this could happen on a route change or in presence of tunnelling). The result of the queue index being bad would be to return a bogus queue (crash could prersumably follow). Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-01l2tp: kzalloc with swapped params in l2tp_dfs_seq_openDr. David Alan Gilbert1-1/+1
'sparse' spotted that the parameters to kzalloc in l2tp_dfs_seq_open were swapped. Tested on current git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git at 1792f17b7210280a3d7ff29da9614ba779cfcedb build, boots and I can see that directory, but there again I could see /sys/kernel/debug/l2tp with it swapped; I don't have any l2tp in use. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-31text ematch: check for NULL pointer before destroying textsearch configThomas Graf1-1/+2
While validating the configuration em_ops is already set, thus the individual destroy functions are called, but the ematch data has not been allocated and associated with the ematch yet. Signed-off-by: Thomas Graf <tgraf@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds6-45/+104
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: isdn: mISDN: socket: fix information leak to userland netdev: can: Change mail address of Hans J. Koch pcnet_cs: add new_id net: Truncate recvfrom and sendto length to INT_MAX. RDS: Let rds_message_alloc_sgs() return NULL RDS: Copy rds_iovecs into kernel memory instead of rereading from userspace RDS: Clean up error handling in rds_cmsg_rdma_args RDS: Return -EINVAL if rds_rdma_pages returns an error net: fix rds_iovec page count overflow can: pch_can: fix section mismatch warning by using a whitelisted name can: pch_can: fix sparse warning netxen_nic: Fix the tx queue manipulation bug in netxen_nic_probe ip_gre: fix fallback tunnel setup vmxnet: trivial annotation of protocol constant vmxnet3: remove unnecessary byteswapping in BAR writing macros ipv6/udp: report SndbufErrors and RcvbufErrors phy/marvell: rename 88ec048 to 88e1318s and fix mscr1 addr
2010-10-30net: Truncate recvfrom and sendto length to INT_MAX.Linus Torvalds1-0/+4
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30RDS: Let rds_message_alloc_sgs() return NULLAndy Grover3-0/+17
Even with the previous fix, we still are reading the iovecs once to determine SGs needed, and then again later on. Preallocating space for sg lists as part of rds_message seemed like a good idea but it might be better to not do this. While working to redo that code, this patch attempts to protect against userspace rewriting the rds_iovec array between the first and second accesses. The consequences of this would be either a too-small or too-large sg list array. Too large is not an issue. This patch changes all callers of message_alloc_sgs to handle running out of preallocated sgs, and fail gracefully. Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30RDS: Copy rds_iovecs into kernel memory instead of rereading from userspaceAndy Grover1-39/+65
Change rds_rdma_pages to take a passed-in rds_iovec array instead of doing copy_from_user itself. Change rds_cmsg_rdma_args to copy rds_iovec array once only. This eliminates the possibility of userspace changing it after our sanity checks. Implement stack-based storage for small numbers of iovecs, based on net/socket.c, to save an alloc in the extremely common case. Although this patch reduces iovec copies in cmsg_rdma_args to 1, we still do another one in rds_rdma_extra_size. Getting rid of that one will be trickier, so it'll be a separate patch. Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30RDS: Clean up error handling in rds_cmsg_rdma_argsAndy Grover1-3/+2
We don't need to set ret = 0 at the end -- it's initialized to 0. Also, don't increment s_send_rdma stat if we're exiting with an error. Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30RDS: Return -EINVAL if rds_rdma_pages returns an errorAndy Grover1-1/+3
rds_cmsg_rdma_args would still return success even if rds_rdma_pages returned an error (or overflowed). Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30net: fix rds_iovec page count overflowLinus Torvalds1-0/+7
As reported by Thomas Pollet, the rdma page counting can overflow. We get the rdma sizes in 64-bit unsigned entities, but then limit it to UINT_MAX bytes and shift them down to pages (so with a possible "+1" for an unaligned address). So each individual page count fits comfortably in an 'unsigned int' (not even close to overflowing into signed), but as they are added up, they might end up resulting in a signed return value. Which would be wrong. Catch the case of tot_pages turning negative, and return the appropriate error code. Reported-by: Thomas Pollet <thomas.pollet@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andy Grover <andy.grover@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30ip_gre: fix fallback tunnel setupEric Dumazet1-3/+3
Before making the fallback tunnel visible to lookups, we should make sure it is completely setup, once ipgre_tunnel_init() had been called and tstats per_cpu pointer allocated. move rcu_assign_pointer(ign->tunnels_wc[0], tunnel); from ipgre_fb_tunnel_init() to ipgre_init_net() Based on a patch from Pavel Emelyanov Reported-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-30ipv6/udp: report SndbufErrors and RcvbufErrorsEric Dumazet1-0/+4
commit a18135eb9389 (Add UDP_MIB_{SND,RCV}BUFERRORS handling.) forgot to make the necessary changes in net/ipv6/proc.c to report additional counters in /proc/net/snmp6 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds17-142/+274
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits) b43: Fix warning at drivers/mmc/core/core.c:237 in mmc_wait_for_cmd mac80211: fix failure to check kmalloc return value in key_key_read libertas: Fix sd8686 firmware reload ath9k: Fix incorrect access of rate flags in RC netfilter: xt_socket: Make tproto signed in socket_mt6_v1(). stmmac: enable/disable rx/tx in the core with a single write. net: atarilance - flags should be unsigned long netxen: fix kdump pktgen: Limit how much data we copy onto the stack. net: Limit socket I/O iovec total length to INT_MAX. USB: gadget: fix ethernet gadget crash in gether_setup fib: Fix fib zone and its hash leak on namespace stop cxgb3: Fix panic in free_tx_desc() cxgb3: fix crash due to manipulating queues before registration 8390: Don't oops on starting dev queue dccp ccid-2: Stop polling dccp: Refine the wait-for-ccid mechanism dccp: Extend CCID packet dequeueing interface dccp: Return-value convention of hc_tx_send_packet() igbvf: fix panic on load ...
2010-10-29Merge branch 'master' of ↵David S. Miller2-3/+8
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-10-29mac80211: fix failure to check kmalloc return value in key_key_readJesper Juhl1-1/+5
I noticed two small issues in mac80211/debugfs_key.c::key_key_read while reading through the code. Patch below. The key_key_read() function returns ssize_t and the value that's actually returned is the return value of simple_read_from_buffer() which also returns ssize_t, so let's hold the return value in a ssize_t local variable rather than a int one. Also, memory is allocated dynamically with kmalloc() which can fail, but the return value of kmalloc() is not checked, so we may end up operating on a null pointer further on. So check for a NULL return and bail out with -ENOMEM in that case. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-29netfilter: fix nf_conntrack_l4proto_register()Eric Dumazet1-0/+6
While doing __rcu annotations work on net/netfilter I found following bug. On some arches, it is possible we publish a table while its content is not yet committed to memory, and lockless reader can dereference wild pointer. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-29netfilter: nf_nat: fix compiler warning with CONFIG_NF_CT_NETLINK=nPatrick McHardy1-20/+20
net/ipv4/netfilter/nf_nat_core.c:52: warning: 'nf_nat_proto_find_get' defined but not used net/ipv4/netfilter/nf_nat_core.c:66: warning: 'nf_nat_proto_put' defined but not used Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-29convert get_sb_pseudo() usersAl Viro1-6/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29convert get_sb_single() usersAl Viro1-9/+9
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-28netfilter: xt_socket: Make tproto signed in socket_mt6_v1().David S. Miller1-4/+3
Otherwise error indications from ipv6_find_hdr() won't be noticed. This required making the protocol argument to extract_icmp6_fields() signed too. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-28pktgen: Limit how much data we copy onto the stack.Nelson Elhage1-3/+4
A program that accidentally writes too much data to the pktgen file can overflow the kernel stack and oops the machine. This is only triggerable by root, so there's no security issue, but it's still an unfortunate bug. printk() won't print more than 1024 bytes in a single call, anyways, so let's just never copy more than that much data. We're on a fairly shallow stack, so that should be safe even with CONFIG_4KSTACKS. Signed-off-by: Nelson Elhage <nelhage@ksplice.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-28net: Limit socket I/O iovec total length to INT_MAX.David S. Miller2-15/+15
This helps protect us from overflow issues down in the individual protocol sendmsg/recvmsg handlers. Once we hit INT_MAX we truncate out the rest of the iovec by setting the iov_len members to zero. This works because: 1) For SOCK_STREAM and SOCK_SEQPACKET sockets, partial writes are allowed and the application will just continue with another write to send the rest of the data. 2) For datagram oriented sockets, where there must be a one-to-one correspondance between write() calls and packets on the wire, INT_MAX is going to be far larger than the packet size limit the protocol is going to check for and signal with -EMSGSIZE. Based upon a patch by Linus Torvalds. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-28fib: Fix fib zone and its hash leak on namespace stopPavel Emelyanov3-1/+24
When we stop a namespace we flush the table and free one, but the added fn_zone-s (and their hashes if grown) are leaked. Need to free. Tries releases all its stuff in the flushing code. Shame on us - this bug exists since the very first make-fib-per-net patches in 2.6.27 :( Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-28dccp ccid-2: Stop pollingGerrit Renker2-8/+20
This updates CCID-2 to use the CCID dequeuing mechanism, converting from previous continuous-polling to a now event-driven mechanism. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-28dccp: Refine the wait-for-ccid mechanismGerrit Renker4-54/+89
This extends the existing wait-for-ccid routine so that it may be used with different types of CCID, addressing the following problems: 1) The queue-drain mechanism only works with rate-based CCIDs. If CCID-2 for example has a full TX queue and becomes network-limited just as the application wants to close, then waiting for CCID-2 to become unblocked could lead to an indefinite delay (i.e., application "hangs"). 2) Since each TX CCID in turn uses a feedback mechanism, there may be changes in its sending policy while the queue is being drained. This can lead to further delays during which the application will not be able to terminate. 3) The minimum wait time for CCID-3/4 can be expected to be the queue length times the current inter-packet delay. For example if tx_qlen=100 and a delay of 15 ms is used for each packet, then the application would have to wait for a minimum of 1.5 seconds before being allowed to exit. 4) There is no way for the user/application to control this behaviour. It would be good to use the timeout argument of dccp_close() as an upper bound. Then the maximum time that an application is willing to wait for its CCIDs to can be set via the SO_LINGER option. These problems are addressed by giving the CCID a grace period of up to the `timeout' value. The wait-for-ccid function is, as before, used when the application (a) has read all the data in its receive buffer and (b) if SO_LINGER was set with a non-zero linger time, or (c) the socket is either in the OPEN (active close) or in the PASSIVE_CLOSEREQ state (client application closes after receiving CloseReq). In addition, there is a catch-all case of __skb_queue_purge() after waiting for the CCID. This is necessary since the write queue may still have data when (a) the host has been passively-closed, (b) abnormal termination (unread data, zero linger time), (c) wait-for-ccid could not finish within the given time limit. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-28dccp: Extend CCID packet dequeueing interfaceGerrit Renker2-57/+86
This extends the packet dequeuing interface of dccp_write_xmit() to allow 1. CCIDs to take care of timing when the next packet may be sent; 2. delayed sending (as before, with an inter-packet gap up to 65.535 seconds). The main purpose is to take CCID-2 out of its polling mode (when it is network- limited, it tries every millisecond to send, without interruption). The mode of operation for (2) is as follows: * new packet is enqueued via dccp_sendmsg() => dccp_write_xmit(), * ccid_hc_tx_send_packet() detects that it may not send (e.g. window full), * it signals this condition via `CCID_PACKET_WILL_DEQUEUE_LATER', * dccp_write_xmit() returns without further action; * after some time the wait-condition for CCID becomes true, * that CCID schedules the tasklet, * tasklet function calls ccid_hc_tx_send_packet() via dccp_write_xmit(), * since the wait-condition is now true, ccid_hc_tx_packet() returns "send now", * packet is sent, and possibly more (since dccp_write_xmit() loops). Code reuse: the taskled function calls dccp_write_xmit(), the timer function reduces to a wrapper around the same code. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-28dccp: Return-value convention of hc_tx_send_packet()Gerrit Renker2-9/+37
This patch reorganises the return value convention of the CCID TX sending function, to permit more flexible schemes, as required by subsequent patches. Currently the convention is * values < 0 mean error, * a value == 0 means "send now", and * a value x > 0 means "send in x milliseconds". The patch provides symbolic constants and a function to interpret return values. In addition, it caps the maximum positive return value to 0xFFFF milliseconds, corresponding to 65.535 seconds. This is possible since in CCID-3/4 the maximum possible inter-packet gap is fixed at t_mbi = 64 sec. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-28net/9p: Return error on read with NULL bufferSanchit Garg1-4/+1
This patch ensures that a read(fd, NULL, 10) returns EFAULT on a 9p file. Signed-off-by: Sanchit Garg <sancgarg@linux.vnet.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-289p: Add datasync to client side TFSYNC/RFSYNC for dotlVenkateswararao Jujjuri (JV)1-3/+4
SYNOPSIS size[4] Tfsync tag[2] fid[4] datasync[4] size[4] Rfsync tag[2] DESCRIPTION The Tfsync transaction transfers ("flushes") all modified in-core data of file identified by fid to the disk device (or other permanent storage device) where that file resides. If datasync flag is specified data will be fleshed but does not flush modified metadata unless that metadata is needed in order to allow a subsequent data retrieval to be correctly handled. Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-28net/9p: Return error if we fail to encode protocol dataAneesh Kumar K.V2-3/+4
We need to return error in case we fail to encode data in protocol buffer. This patch also return error in case of a failed copy_from_user. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-28net/9p: Add waitq to VirtIO transport.Venkateswararao Jujjuri (JV)2-8/+41
If there is not enough space for the PDU on the VirtIO ring, current code returns -EIO propagating the error to user. This patch introduced a wqit_queue on the channel, and lets the process wait on this queue until VirtIO ring frees up. Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-28[net/9p]Serialize virtqueue operations to make VirtIO transport SMP safe.Venkateswararao Jujjuri (JV)1-10/+24
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-289p: Implement TREADLINK operation for 9p2000.LM. Mohan Kumar1-0/+26
Synopsis size[4] TReadlink tag[2] fid[4] size[4] RReadlink tag[2] target[s] Description Readlink is used to return the contents of the symoblic link referred by fid. Contents of symboic link is returned as a response. target[s] - Contents of the symbolic link referred by fid. Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-289p: Implement TGETLOCKM. Mohan Kumar1-0/+34
Synopsis size[4] TGetlock tag[2] fid[4] getlock[n] size[4] RGetlock tag[2] getlock[n] Description TGetlock is used to test for the existence of byte range posix locks on a file identified by given fid. The reply contains getlock structure. If the lock could be placed it returns F_UNLCK in type field of getlock structure. Otherwise it returns the details of the conflicting locks in the getlock structure getlock structure: type[1] - Type of lock: F_RDLCK, F_WRLCK start[8] - Starting offset for lock length[8] - Number of bytes to check for the lock If length is 0, check for lock in all bytes starting at the location 'start' through to the end of file pid[4] - PID of the process that wants to take lock/owns the task in case of reply client[4] - Client id of the system that owns the process which has the conflicting lock Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-289p: Implement TLOCKM. Mohan Kumar1-0/+33
Synopsis size[4] TLock tag[2] fid[4] flock[n] size[4] RLock tag[2] status[1] Description Tlock is used to acquire/release byte range posix locks on a file identified by given fid. The reply contains status of the lock request flock structure: type[1] - Type of lock: F_RDLCK, F_WRLCK, F_UNLCK flags[4] - Flags could be either of P9_LOCK_FLAGS_BLOCK - Blocked lock request, if there is a conflicting lock exists, wait for that lock to be released. P9_LOCK_FLAGS_RECLAIM - Reclaim lock request, used when client is trying to reclaim a lock after a server restrart (due to crash) start[8] - Starting offset for lock length[8] - Number of bytes to lock If length is 0, lock all bytes starting at the location 'start' through to the end of file pid[4] - PID of the process that wants to take lock client_id[4] - Unique client id status[1] - Status of the lock request, can be P9_LOCK_SUCCESS(0), P9_LOCK_BLOCKED(1), P9_LOCK_ERROR(2) or P9_LOCK_GRACE(3) P9_LOCK_SUCCESS - Request was successful P9_LOCK_BLOCKED - A conflicting lock is held by another process P9_LOCK_ERROR - Error while processing the lock request P9_LOCK_GRACE - Server is in grace period, it can't accept new lock requests in this period (except locks with P9_LOCK_FLAGS_RECLAIM flag set) Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-10-28[9p] Introduce client side TFSYNC/RFSYNC for dotl.Venkateswararao Jujjuri (JV)1-0/+25
SYNOPSIS size[4] Tfsync tag[2] fid[4] size[4] Rfsync tag[2] DESCRIPTION The Tfsync transaction transfers ("flushes") all modified in-core data of file identified by fid to the disk device (or other permanent storage device) where that file resides. Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>