summaryrefslogtreecommitdiff
path: root/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2014-10-09nl80211: clear skb cb before passing to netlinkJohannes Berg1-0/+6
commit bd8c78e78d5011d8111bc2533ee73b13a3bd6c42 upstream. In testmode and vendor command reply/event SKBs we use the skb cb data to store nl80211 parameters between allocation and sending. This causes the code for CONFIG_NETLINK_MMAP to get confused, because it takes ownership of the skb cb data when the SKB is handed off to netlink, and it doesn't explicitly clear it. Clear the skb cb explicitly when we're done and before it gets passed to netlink to avoid this issue. Reported-by: Assaf Azulay <assaf.azulay@intel.com> Reported-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-07cfg80211: fix mic_failure tracingEliad Peller1-1/+2
commit 8c26d458394be44e135d1c6bd4557e1c4e1a0535 upstream. tsc can be NULL (mac80211 currently always passes NULL), resulting in NULL-dereference. check before copying it. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-09radiotap: fix bitmap-end-finding buffer overrunJohannes Berg1-0/+4
commit bd02cd2549cfcdfc57cb5ce57ffc3feb94f70575 upstream. Evan Huus found (by fuzzing in wireshark) that the radiotap iterator code can access beyond the length of the buffer if the first bitmap claims an extension but then there's no data at all. Fix this. Reported-by: Evan Huus <eapache@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04cfg80211: fix scheduled scan pointer accessJohannes Berg1-2/+2
commit 79845c662eeb95c9a180b9bd0d3ad848ee65b94c upstream. Since rdev->sched_scan_req is dereferenced outside the lock protecting it, this might be done at the wrong time, causing crashes. Move the dereference to where it should be - inside the RTNL locked section. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-13cfg80211: fix warning when using WEXT for IBSSBruno Randolf1-0/+3
commit f478f33a93f9353dcd1fe55445343d76b1c3f84a upstream. Fix kernel warning when using WEXT for configuring ad-hoc mode, e.g. "iwconfig wlan0 essid test channel 1" WARNING: at net/wireless/chan.c:373 cfg80211_chandef_usable+0x50/0x21c [cfg80211]() The warning is caused by an uninitialized variable center_freq1. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-04wireless: radiotap: fix parsing buffer overrunJohannes Berg1-1/+6
commit f5563318ff1bde15b10e736e97ffce13be08bc1a upstream. When parsing an invalid radiotap header, the parser can overrun the buffer that is passed in because it doesn't correctly check 1) the minimum radiotap header size 2) the space for extended bitmaps The first issue doesn't affect any in-kernel user as they all check the minimum size before calling the radiotap function. The second issue could potentially affect the kernel if an skb is passed in that consists only of the radiotap header with a lot of extended bitmaps that extend past the SKB. In that case a read-only buffer overrun by at most 4 bytes is possible. Fix this by adding the appropriate checks to the parser. Reported-by: Evan Huus <eapache@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20nl80211: fix another nl80211_fam.attrbuf raceJohannes Berg1-2/+4
commit c319d50bfcf678c2857038276d9fab3c6646f3bf upstream. This is similar to the race Linus had reported, but in this case it's an older bug: nl80211_prepare_wdev_dump() uses the wiphy index in cb->args[0] as it is and thus parses the message over and over again instead of just once because 0 is the first valid wiphy index. Similar code in nl80211_testmode_dump() correctly offsets the wiphy_index by 1, do that here as well. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20cfg80211: fix P2P GO interface teardownJohannes Berg1-0/+1
commit 74418edec915d0f446debebde08d170c7b8ba0ee upstream. When a P2P GO interface goes down, cfg80211 doesn't properly tear it down, leading to warnings later. Add the GO interface type to the enumeration to tear it down like AP interfaces. Otherwise, we leave it pending and mac80211's state can get very confused, leading to warnings later. Reported-by: Ilan Peer <ilan.peer@intel.com> Tested-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-11nl80211: fix mgmt tx status and testmode reporting for netnsMichal Kazior1-2/+5
commit a0ec570f4f69c4cb700d743a915096c2c8f56a99 upstream. These two events were sent to the default network namespace. This caused AP mode in a non-default netns to not work correctly. Mgmt tx status was multicasted to a different (default) netns instead of the one the AP was in. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-19nl80211: fix attrbuf access race by allocating a separate oneJohannes Berg1-2/+9
Since my commit 3713b4e364 ("nl80211: allow splitting wiphy information in dumps"), nl80211_dump_wiphy() uses the global nl80211_fam.attrbuf for parsing the incoming data. This wouldn't be a problem if it only did so on the first dump iteration which is locked against other commands in generic netlink, but due to space constraints in cb->args (the needed state doesn't fit) I decided to always parse the original message. That's racy though since nl80211_fam.attrbuf could be used by some other parsing in generic netlink concurrently. For now, fix this by allocating a separate parse buffer (it's a bit too big for the stack, currently 1448 bytes on 64-bit). For -next, I'll change the code to parse into the global buffer in the first round only and then allocate a smaller buffer to keep the data in cb->args. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-23cfg80211: fix reporting 64-bit station info tx bytesFelix Fietkau1-1/+1
Copy & paste mistake - STATION_INFO_TX_BYTES64 is the name of the flag, not NL80211_STA_INFO_TX_BYTES64. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-23cfg80211: check wdev->netdev in connection workJohannes Berg1-0/+3
If a P2P-Device is present and another virtual interface triggers the connection work, the system crash because it tries to check if the P2P-Device's netdev (which doesn't exist) is up. Skip any wdevs that have no netdev to fix this. Cc: stable@vger.kernel.org Reported-by: YanBo <dreamfly281@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-16cfg80211: fix sending WoWLAN TCP wakeup settingsJohannes Berg1-0/+2
The code sending the current WoWLAN TCP wakeup settings in nl80211_send_wowlan_tcp() is not closing the nested attribute, thus causing the parser to get confused on the receiver side in userspace (iw). Fix this. Cc: stable@vger.kernel.org [3.9] Reported-by: Deepak Arora <deepakx.arora@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-16cfg80211: fix interface down/disconnect state handlingJohannes Berg2-2/+2
When the interface goes down, there's no need to call cfg80211_mlme_down() after __cfg80211_disconnect() as the latter will call the former (if appropriate.) Also, in __cfg80211_disconnect(), if the cfg80211 SME isn't used, __cfg80211_disconnected() may still need to be called (depending on the current state) so that the SME state gets cleared. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-16nl80211: Add wdev identifier to some nl80211 notificationsIlan Peer1-0/+2
Adding the attributes fixes an issue with P2P Device not working properly for management frame TX. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-16cfg80211: fix WoWLAN wakeup tracingJohannes Berg1-10/+13
If the device reports a non-wireless wakeup reason, the tracing code crashes trying to dereference a NULL pointer. Fix this by checking the pointer on all accesses and also add a non_wireless tag to the event. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-16cfg80211: fix wiphy_register error pathJohannes Berg1-6/+10
If rfkill_register() fails in wiphy_register() the struct device is unregistered but everything else isn't (regulatory, debugfs) and we even leave the wiphy instance on all internal lists even though it will likely be freed soon, which is clearly a problem. Fix this by cleaning up properly. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds3-40/+38
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
2013-04-29hostap: Don't use create_proc_read_entry()David Howells3-40/+38
Don't use create_proc_read_entry() as that is deprecated, but rather use proc_create_data() and seq_file instead. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Jouni Malinen <j@w1.fi> cc: John W. Linville <linville@tuxdriver.com> cc: Johannes Berg <johannes@sipsolutions.net> cc: linux-wireless@vger.kernel.org cc: netdev@vger.kernel.org cc: devel@driverdev.osuosl.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-24Merge branch 'master' of ↵John W. Linville7-81/+301
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-04-22cfg80211: introduce critical protocol indication from user-spaceArend van Spriel5-1/+183
Some protocols need a more reliable connection to complete successful in reasonable time. This patch adds a user-space API to indicate the wireless driver that a critical protocol is about to commence and when it is done, using nl80211 primitives NL80211_CMD_CRIT_PROTOCOL_START and NL80211_CRIT_PROTOCOL_STOP. There can be only on critical protocol session started per registered cfg80211 device. The driver can support this by implementing the cfg80211 callbacks .crit_proto_start() and .crit_proto_stop(). Examples of protocols that can benefit from this are DHCP, EAPOL, APIPA. Exactly how the link can/should be made more reliable is up to the driver. Things to consider are avoid scanning, no multi-channel operations, and alter coexistence schemes. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-22cfg80211: invert P2P-Device vs. netdev check orderingJohannes Berg1-4/+4
In cfg80211_can_use_iftype_chan(), check for P2P Device first, and then for netdevs. This doesn't really change anything but makes the code a bit easier to read since it may not be obvious for everyone at first that a P2P device has no netdev. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-22cfg80211: fix P2P-Device stop lockingJohannes Berg1-0/+2
cfg80211_stop_p2p_device() requires the devlist_mtx to be held, but nl80211_stop_p2p_device() doesn't acquire it which is a locking error and causes a warning (when lockdep is enabled). Fix this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-22Merge remote-tracking branch 'wireless-next/master' into mac80211-nextJohannes Berg7-54/+108
2013-04-19nl80211: allow using wdev identifiers to get scan resultsJohannes Berg1-75/+91
Most dump callbacks, including the scan results one, use the netdev to identify what to do, which is incorrect for the P2P_DEVICE support, it needs to be able to get the scan result from the wdev. Change all dumps to unify the code, but ones other than scan don't really support being executed on a wdev that has no netdev. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-16cfg80211: add ieee80211_operating_class_to_bandJohannes Berg1-0/+20
This function converts a (global only!) operating class to an internal band identifier. This will be needed for extended channel switch support. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-16wireless: regulatory: fix channel disabling race conditionJohannes Berg1-1/+1
When a full scan 2.4 and 5 GHz scan is scheduled, but then the 2.4 GHz part of the scan disables a 5.2 GHz channel due to, e.g. receiving country or frequency information, that 5.2 GHz channel might already be in the list of channels to scan next. Then, when the driver checks if it should do a passive scan, that will return false and attempt an active scan. This is not only wrong but can also lead to the iwlwifi device firmware crashing since it checks regulatory as well. Fix this by not setting the channel flags to just disabled but rather OR'ing in the disabled flag. That way, even if the race happens, the channel will be scanned passively which is still (mostly) correct. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-10Merge branch 'master' of ↵John W. Linville3-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/rt2x00/rt2x00pci.c net/mac80211/sta_info.c net/wireless/core.h
2013-04-10Merge branch 'master' of ↵John W. Linville1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/rt2x00/rt2x00pci.c
2013-04-03Merge branch 'for-john' of ↵John W. Linville1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2013-04-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller7-54/+108
Conflicts: net/mac80211/sta_info.c net/wireless/core.h Two minor conflicts in wireless. Overlapping additions of extern declarations in net/wireless/core.h and a bug fix overlapping with the addition of a boolean parameter to __ieee80211_key_free(). Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-30cfg80211: sched_scan_mtx lock in cfg80211_conn_work()Artem Savkov1-0/+2
Introduced in f9f475292dbb0e7035fb6661d1524761ea0888d9 ("cfg80211: always check for scan end on P2P device") cfg80211_conn_scan() which requires sched_scan_mtx to be held can be called from cfg80211_conn_work(). Without this we are hitting multiple warnings like the following: WARNING: at net/wireless/sme.c:88 cfg80211_conn_scan+0x1dc/0x3a0 [cfg80211]() Hardware name: 0578A21 Modules linked in: ... Pid: 620, comm: kworker/3:1 Not tainted 3.9.0-rc4-next-20130328+ #326 Call Trace: [<c1036992>] warn_slowpath_common+0x72/0xa0 [<c10369e2>] warn_slowpath_null+0x22/0x30 [<faa4b0ec>] cfg80211_conn_scan+0x1dc/0x3a0 [cfg80211] [<faa4b344>] cfg80211_conn_do_work+0x94/0x380 [cfg80211] [<faa4c3b2>] cfg80211_conn_work+0xa2/0x130 [cfg80211] [<c1051858>] process_one_work+0x198/0x450 Signed-off-by: Artem Savkov <artem.savkov@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-29Merge branch 'master' of ↵John W. Linville7-54/+106
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: net/mac80211/sta_info.c net/wireless/core.h
2013-03-28net: add ETH_P_802_3_MINSimon Horman1-1/+1
Add a new constant ETH_P_802_3_MIN, the minimum ethernet type for an 802.3 frame. Frames with a lower value in the ethernet type field are Ethernet II. Also update all the users of this value that David Miller and I could find to use the new constant. Also correct a bug in util.c. The comparison with ETH_P_802_3_MIN should be >= not >. As suggested by Jesse Gross. Compile tested only. Cc: David Miller <davem@davemloft.net> Cc: Jesse Gross <jesse@nicira.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: John W. Linville <linville@tuxdriver.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Bart De Schuymer <bart.de.schuymer@pandora.be> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: linux-bluetooth@vger.kernel.org Cc: netfilter-devel@vger.kernel.org Cc: bridge@lists.linux-foundation.org Cc: linux-wireless@vger.kernel.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-media@vger.kernel.org Cc: netdev@vger.kernel.org Cc: dev@openvswitch.org Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-25Merge branch 'for-john' of ↵John W. Linville7-54/+106
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2013-03-24cfg80211: always check for scan end on P2P deviceJohannes Berg6-47/+92
If a P2P device wdev is removed while it has a scan, then the scan completion might crash later as it is already freed by that time. To avoid the crash always check the scan completion when the P2P device is being removed for some reason. If the driver already canceled it, don't want and free it, otherwise warn and leak it to avoid later crashes. In order to do this, locking needs to be changed away from the rdev mutex (which can't always be guaranteed). For now, use the sched_scan_mtx instead, I'll rename it to just scan_mtx in a later patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20cfg80211: fix wdev tracing crashJohannes Berg1-1/+2
Arend reported a crash in tracing if the driver returns an ERR_PTR() value from the add_virtual_intf() callback. This is due to the tracing then still attempting to dereference the "pointer", fix this by using IS_ERR_OR_NULL(). Reported-by: Arend van Spriel <arend@broadcom.com> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20cfg80211: fix error return code in cfg80211_init()Wei Yongjun1-1/+3
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-20cfg80211: fix potential connection work crashJohannes Berg1-1/+1
If wpa_supplicant and iw/iwconfig are used together, very rarely the system crashes. It seems to be related to the connection parameters not being set up, but it's not all clear to me how this happens. In any case, checking that the conn pointer exists here is probably a good idea. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-07cfg80211: fix potential BSS memory leak and updateJohannes Berg1-5/+11
In the odd case that while updating information from a beacon, a BSS was found that is part of a hidden group, we drop the new information. In this case, however, we leak the IE buffer from the update, and erroneously update the entry's timestamp so it will never time out. Fix both these issues. Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-07cfg80211: fix inconsistency in trace for rdev_set_mac_aclVladimir Kondratiev1-1/+1
There is NETDEV_ENTRY that was incorrectly assigned as WIPHY_ASSIGN, fix it. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06nl80211: user_mpm overrides auto_open_plinksThomas Pedersen1-0/+3
If the user requested a userspace MPM, automatically disable auto_open_plinks to fully disable the kernel MPM. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06cfg80211: rename mesh station typesThomas Pedersen1-4/+4
The mesh station types used to refer to whether the station was secure or nonsecure. Really the salient information is whether it is managed by the kernel or userspace Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06nl80211: explicit userspace MPMThomas Pedersen2-0/+9
Secure mesh had the implicit requirement that the Mesh Peering Management entity be in userspace. However userspace might want to implement an open MPM as well, so specify a mesh setup parameter to indicate this. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06regulatory: allow VHT channels in world roamingJohannes Berg1-3/+3
For VHT, the wider bandwidths (up to 160 MHz) need to be allowed. Since world roaming only covers the case of connecting to an AP, it can be opened up there, we will rely on the AP to know the local regulations. Acked-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06cfg80211: enable TDLS on P2P client interfacesJohannes Berg1-0/+1
There's no reason TDLS should be prevented on P2P client interfaces, and most of the code already handles it, so allow adding stations for it. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06cfg80211/mac80211: disconnect on suspendStanislaw Gruszka4-40/+68
If possible that after suspend, cfg80211 will receive request to disconnect what require action on interface that was removed during suspend. Problem can manifest itself by various warnings similar to below one: WARNING: at net/mac80211/driver-ops.h:12 ieee80211_bss_info_change_notify+0x2f9/0x300 [mac80211]() wlan0: Failed check-sdata-in-driver check, flags: 0x4 Call Trace: [<c043e0b3>] warn_slowpath_fmt+0x33/0x40 [<f83707c9>] ieee80211_bss_info_change_notify+0x2f9/0x300 [mac80211] [<f83a660a>] ieee80211_recalc_ps_vif+0x2a/0x30 [mac80211] [<f83a6706>] ieee80211_set_disassoc+0xf6/0x500 [mac80211] [<f83a9441>] ieee80211_mgd_deauth+0x1f1/0x280 [mac80211] [<f8381b36>] ieee80211_deauth+0x16/0x20 [mac80211] [<f8261e70>] cfg80211_mlme_down+0x70/0xc0 [cfg80211] [<f8264de1>] __cfg80211_disconnect+0x1b1/0x1d0 [cfg80211] To fix the problem disconnect from any associated network before suspend. User space is responsible to establish connection again after resume. This basically need to be done by user space anyway, because associated stations can go away during suspend (for example NetworkManager disconnects on suspend and connect on resume by default). Patch also handle situation when driver refuse to suspend with wowlan configured and try to suspend again without it. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06cfg80211: Extend support for IEEE 802.11r Fast BSS TransitionJouni Malinen3-0/+135
Add NL80211_CMD_UPDATE_FT_IES to support update of FT IEs to the WLAN driver and NL80211_CMD_FT_EVENT to send FT events from the WLAN driver. This will carry the target AP's MAC address along with the relevant Information Elements. This event is used to report received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE). These changes allow FT to be supported with drivers that use an internal SME instead of user space option (like FT implementation in wpa_supplicant with mac80211-based drivers). Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06cfg80211: prohibit zero keepalive intervalJohannes Berg1-1/+2
It's not useful to specify a 0 keepalive interval, this would send too much data. Prohibit this to also avoid device issues. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-06cfg80211: refactor association parametersJohannes Berg4-104/+63
cfg80211_mlme_assoc() has grown far too many arguments, make the caller build almost all of the driver struct and pass that to the function instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-06 06:39:45 +0000