summaryrefslogtreecommitdiff
path: root/net/tipc
AgeCommit message (Collapse)AuthorFilesLines
2012-10-04tipc: prevent dropped connections due to rcvbuf overflowErik Hugne1-0/+1
When large buffers are sent over connected TIPC sockets, it is likely that the sk_backlog will be filled up on the receiver side, but the TIPC flow control mechanism is happily unaware of this since that is based on message count. The sender will receive a TIPC_ERR_OVERLOAD message when this occurs and drop it's side of the connection, leaving it stale on the receiver end. By increasing the sk_rcvbuf to a 'worst case' value, we avoid the overload caused by a full backlog queue and the flow control will work properly. This worst case value is the max TIPC message size times the flow control window, multiplied by two because a sender will transmit up to double the window size before a port is marked congested. We multiply this by 2 to account for the sk_buff and other overheads. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-18net/tipc/name_table.c: Remove unecessary semicolonPeter Senna Tschudin1-1/+1
Found by http://coccinelle.lip6.fr/ Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-10netlink: Rename pid to portid to avoid confusionEric W. Biederman1-1/+1
It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20tipc: eliminate configuration for maximum number of name publicationsYing Xue4-26/+5
Gets rid of the need for users to specify the maximum number of name publications supported by TIPC. TIPC now automatically provides support for the maximum number of name publications to 65535. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20tipc: eliminate configuration for maximum number of name subscriptionsYing Xue4-28/+7
Gets rid of the need for users to specify the maximum number of name subscriptions supported by TIPC. TIPC now automatically provides support for the maximum number of name subscriptions to 65535. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20tipc: add __read_mostly annotations to several global variablesYing Xue3-11/+11
Added to the following: - tipc_random - tipc_own_addr - tipc_max_ports - tipc_net_id - tipc_remote_management - handler_enabled The above global variables are read often, but written rarely. Use __read_mostly to prevent them being on the same cacheline as another variable which is written to often, which would cause cacheline bouncing. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20tipc: convert tipc_nametbl_size type from variable to macroYing Xue1-5/+5
There is nothing changing this variable dynamically, so change it to a macro to make that more obvious when reading the code. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20tipc: change tipc_net_start routine return value typeYing Xue3-6/+4
Since now tipc_net_start() always returns a success code - 0, its return value type should be changed from integer to void, which can avoid unnecessary check for its return value. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20tipc: manually inline single use media_name_valid routineYing Xue1-16/+1
After eliminating the mechanism which checks whether all letters in media name string are within a given character set, the media_name_valid routine becomes trivial. It is also only used once, so it is unnecessary to keep it as a separate function. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20tipc: remove pointless name sanity check and tipc_alphabet arrayYing Xue4-12/+3
There is no real reason to check whether all letters in the given media name and network interface name are within the character set defined in tipc_alphabet array. Even if we eliminate the checking, the rest of checking conditions in tipc_enable_bearer() can ensure we do not enable an invalid or illegal bearer. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20tipc: fix lockdep warning during bearer initializationYing Xue1-1/+15
When the lockdep validator is enabled, it will report the below warning when we enable a TIPC bearer: [ INFO: possible irq lock inversion dependency detected ] --------------------------------------------------------- Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(ptype_lock); local_irq_disable(); lock(tipc_net_lock); lock(ptype_lock); <Interrupt> lock(tipc_net_lock); *** DEADLOCK *** the shortest dependencies between 2nd lock and 1st lock: -> (ptype_lock){+.+...} ops: 10 { [...] SOFTIRQ-ON-W at: [<c1089418>] __lock_acquire+0x528/0x13e0 [<c108a360>] lock_acquire+0x90/0x100 [<c1553c38>] _raw_spin_lock+0x38/0x50 [<c14651ca>] dev_add_pack+0x3a/0x60 [<c182da75>] arp_init+0x1a/0x48 [<c182dce5>] inet_init+0x181/0x27e [<c1001114>] do_one_initcall+0x34/0x170 [<c17f7329>] kernel_init+0x110/0x1b2 [<c155b6a2>] kernel_thread_helper+0x6/0x10 [...] ... key at: [<c17e4b10>] ptype_lock+0x10/0x20 ... acquired at: [<c108a360>] lock_acquire+0x90/0x100 [<c1553c38>] _raw_spin_lock+0x38/0x50 [<c14651ca>] dev_add_pack+0x3a/0x60 [<c8bc18d2>] enable_bearer+0xf2/0x140 [tipc] [<c8bb283a>] tipc_enable_bearer+0x1ba/0x450 [tipc] [<c8bb3a04>] tipc_cfg_do_cmd+0x5c4/0x830 [tipc] [<c8bbc032>] handle_cmd+0x42/0xd0 [tipc] [<c148e802>] genl_rcv_msg+0x232/0x280 [<c148d3f6>] netlink_rcv_skb+0x86/0xb0 [<c148e5bc>] genl_rcv+0x1c/0x30 [<c148d144>] netlink_unicast+0x174/0x1f0 [<c148ddab>] netlink_sendmsg+0x1eb/0x2d0 [<c1456bc1>] sock_aio_write+0x161/0x170 [<c1135a7c>] do_sync_write+0xac/0xf0 [<c11360f6>] vfs_write+0x156/0x170 [<c11361e2>] sys_write+0x42/0x70 [<c155b0df>] sysenter_do_call+0x12/0x38 [...] } -> (tipc_net_lock){+..-..} ops: 4 { [...] IN-SOFTIRQ-R at: [<c108953a>] __lock_acquire+0x64a/0x13e0 [<c108a360>] lock_acquire+0x90/0x100 [<c15541cd>] _raw_read_lock_bh+0x3d/0x50 [<c8bb874d>] tipc_recv_msg+0x1d/0x830 [tipc] [<c8bc195f>] recv_msg+0x3f/0x50 [tipc] [<c146a5fa>] __netif_receive_skb+0x22a/0x590 [<c146ab0b>] netif_receive_skb+0x2b/0xf0 [<c13c43d2>] pcnet32_poll+0x292/0x780 [<c146b00a>] net_rx_action+0xfa/0x1e0 [<c103a4be>] __do_softirq+0xae/0x1e0 [...] } >From the log, we can see three different call chains between CPU0 and CPU1: Time 0 on CPU0: kernel_init()->inet_init()->dev_add_pack() At time 0, the ptype_lock is held by CPU0 in dev_add_pack(); Time 1 on CPU1: tipc_enable_bearer()->enable_bearer()->dev_add_pack() At time 1, tipc_enable_bearer() first holds tipc_net_lock, and then wants to take ptype_lock to register TIPC protocol handler into the networking stack. But the ptype_lock has been taken by dev_add_pack() on CPU0, so at this time the dev_add_pack() running on CPU1 has to be busy looping. Time 2 on CPU0: netif_receive_skb()->recv_msg()->tipc_recv_msg() At time 2, an incoming TIPC packet arrives at CPU0, hence tipc_recv_msg() will be invoked. In tipc_recv_msg(), it first wants to hold tipc_net_lock. At the moment, below scenario happens: On CPU0, below is our sequence of taking locks: lock(ptype_lock)->lock(tipc_net_lock) On CPU1, our sequence of taking locks looks like: lock(tipc_net_lock)->lock(ptype_lock) Obviously deadlock may happen in this case. But please note the deadlock possibly doesn't occur at all when the first TIPC bearer is enabled. Before enable_bearer() -- running on CPU1 does not hold ptype_lock, so the TIPC receive handler (i.e. recv_msg()) is not registered successfully via dev_add_pack(), so the tipc_recv_msg() cannot be called by recv_msg() even if a TIPC message comes to CPU0. But when the second TIPC bearer is registered, the deadlock can perhaps really happen. To fix it, we will push the work of registering TIPC protocol handler into workqueue context. After the change, both paths taking ptype_lock are always in process contexts, thus, the deadlock should never occur. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20tipc: optimize the initialization of network device notifierYing Xue1-3/+10
Ethernet media initialization is only done when TIPC is started or switched to network mode. So the initialization of the network device notifier structure can be moved out of this function and done statically instead. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-13tipc: remove print_buf and deprecated log buffer codeErik Hugne7-333/+2
The internal log buffer handling functions can now safely be removed since there is no code using it anymore. Requests to interact with the internal tipc log buffer over netlink (in config.c) will report 'obsolete command'. This represents the final removal of any references to a struct print_buf, and the removal of the struct itself. We also get rid of a TIPC specific Kconfig in the process. Finally, log.h is removed since it is not needed anymore. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-07-13tipc: phase out most of the struct print_buf usageErik Hugne10-222/+213
The tipc_printf is renamed to tipc_snprintf, as the new name describes more what the function actually does. It is also changed to take a buffer and length parameter and return number of characters written to the buffer. All callers of this function that used to pass a print_buf are updated. Final removal of the struct print_buf itself will be done synchronously with the pending removal of the deprecated logging code that also was using it. Functions that build up a response message with a list of ports, nametable contents etc. are changed to return the number of characters written to the output buffer. This information was previously hidden in a field of the print_buf struct, and the number of chars written was fetched with a call to tipc_printbuf_validate. This function is removed since it is no longer referenced nor needed. A generic max size ULTRA_STRING_MAX_LEN is defined, named in keeping with the existing TIPC_TLV_ULTRA_STRING, and the various definitions in port, link and nametable code that largely duplicated this information are removed. This means that amount of link statistics that can be returned is now increased from 2k to 32k. The buffer overflow check is now done just before the reply message is passed over netlink or TIPC to a remote node and the message indicating a truncated buffer is changed to a less dramatic one (less CAPS), placed at the end of the message. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-07-13tipc: simplify print buffer handling in tipc_printfErik Hugne1-42/+10
tipc_printf was previously used both to construct debug traces and to append data to buffers that should be sent over netlink to the tipc-config application. A global print_buffer was used to format the string before it was copied to the actual output buffer. This could lead to concurrent access of the global print_buffer, which then had to be lock protected. This is simplified by changing tipc_printf to append data directly to the output buffer using vscnprintf. With the new implementation of tipc_printf, there is no longer any risk of concurrent access to the internal log buffer, so the lock (and the comments describing it) are no longer strictly necessary. However, there are still a few functions that do grab this lock before resizing/dumping the log buffer. We leave the lock, and these functions untouched since they will be removed with a subsequent commit that drops the deprecated log buffer handling code Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-07-13tipc: simplify link_print by divorcing it from using tipc_printfPaul Gortmaker1-17/+7
To pave the way for a pending cleanup of tipc_printf, and removal of struct print_buf entirely, we make that task simpler by converting link_print to issue its messages with standard printk infrastructure. [Original idea separated from a larger patch from Erik Hugne <erik.hugne@ericsson.com>] Cc: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-07-13tipc: remove TIPC packet debugging functions and macrosErik Hugne4-312/+0
The link queue traces and packet level debug functions served a purpose during early development, but are now redundant since there are other, more capable tools available for debugging at the packet level. The TIPC_DEBUG Kconfig option is removed since it does not provide any extra debugging features anymore. This gets rid of a lot of tipc_printf usages, which will make the pending cleanup work of that function easier. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-07-13tipc: use standard printk shortcut macros (pr_err etc.)Erik Hugne18-174/+177
All messages should go directly to the kernel log. The TIPC specific error, warning, info and debug trace macro's are removed and all references replaced with pr_err, pr_warn, pr_info and pr_debug. Commonly used sub-strings are explicitly declared as a const char to reduce .text size. Note that this means the debug messages (changed to pr_debug), are now enabled through dynamic debugging, instead of a TIPC specific Kconfig option (TIPC_DEBUG). The latter will be phased out completely Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> [PG: use pr_fmt as suggested by Joe Perches <joe@perches.com>] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-07-12tipc: limit error messages relating to memory leak to one linePaul Gortmaker1-2/+4
With the default name table size of 1024, it is possible that the sanity check in tipc_nametbl_stop could spam out 1024 essentially identical error messages if memory was corrupted or similar. Limit it to issuing no more than a single message. The actual chain number (i.e. 0 --> 1023) wouldn't provide any useful insight if/when such an instance happened, so don't bother printing out that value. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-07-12tipc: factor stats struct out of the larger link structPaul Gortmaker1-30/+32
This is done to improve readability, and so that we can give the struct a name that will allow us to declare a local pointer to it in code, instead of having to always redirect through the link struct to get to it. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-07-10net: Fix non-kernel-doc comments with kernel-doc start markerBen Hutchings1-3/+2
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10net: Fix (nearly-)kernel-doc comments for various functionsBen Hutchings7-27/+27
Fix incorrect start markers, wrapped summary lines, missing section breaks, incorrect separators, and some name mismatches. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-04net: Remove casts to same typeJoe Perches2-6/+5
Adding casts of objects to the same type is unnecessary and confusing for a human reader. For example, this cast: int y; int *p = (int *)&y; I used the coccinelle script below to find and remove these unnecessary casts. I manually removed the conversions this script produces of casts with __force and __user. @@ type T; T *p; @@ - (T *)p + p Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30tipc: compress out gratuitous extra carriage returnsPaul Gortmaker32-530/+16
Some of the comment blocks are floating in limbo between two functions, or between blocks of code. Delete the extra line feeds between any comment and its associated following block of code, to be consistent with the majority of the rest of the kernel. Also delete trailing newlines at EOF and fix a couple trivial typos in existing comments. This is a 100% cosmetic change with no runtime impact. We get rid of over 500 lines of non-code, and being blank line deletes, they won't even show up as noise in git blame. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-27tipc: Reject payload messages with invalid message typeAllan Stephens1-5/+2
Adds check to ensure TIPC sockets reject incoming payload messages that have an unrecognized message type. Remove the old open question about whether TIPC_ERR_NO_PORT is the proper return value. It is appropriate here since there are valid instances where another node can make use of the reply, and at this point in time the host is already broadcasting TIPC data, so there are no real security concerns. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-26tipc: Enhance error checking of published namesAllan Stephens2-7/+4
Consolidates validation of scope and name sequence range values into a single routine where it applies both to local name publications and to name publications issued by other nodes in the network. This change means that the scope value for non-local publications is now validated and the name sequence range for local publications is now validated only once. Additionally, a publication attempt that fails validation now creates an entry in the system log file only if debugging capabilities have been enabled; this prevents the system log from being cluttered up with messages caused by a defective application or network node. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-26tipc: Create helper routine to delete unused name sequence structureAllan Stephens1-12/+15
Replaces two identical chunks of code that delete an unused name sequence structure from TIPC's name table with calls to a new routine that performs this operation. This change is cosmetic and doesn't impact the operation of TIPC. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-26tipc: remove redundant memset and stale comment from subscr.cAllan Stephens1-2/+0
Eliminate code to zero-out the main topology service structure, which is already zeroed-out. Get rid of a comment documenting a field of the main topology service structure that no longer exists. Both are cosmetic changes with no impact on runtime behaviour. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-26tipc: Optimize initialization of network topology serviceAllan Stephens1-1/+1
Initialization now occurs in the calling thread of control, rather than being deferred to the TIPC tasklet. With the current codebase, the deferral is no longer necessary. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-26tipc: Enhance re-initialization of network topology serviceAllan Stephens1-3/+0
Streamlines the job of re-initializing TIPC's network topology service when a node's network address is first assigned. Rather than destroying the topology server port and breaking its connections to existing subscribers, TIPC now simply lets the service continue running (since the change to the port identifier of each port used by the topology service no longer impacts the flow of messages between the service and its subscribers). This enhancement means that applications that utilize the topology service prior to the assignment of TIPC's network address no longer need to re-establish their subscriptions when the address is finally assigned. However, it is worth noting that any subsequent events for existing subscriptions report the new port identifier of the publishing port, rather than the original port identifier. (For example, a name that was previously reported as being published by <0.0.0:ref> may be subsequently withdrawn by <Z.C.N:ref>.) This doesn't impact any of the existing known userspace in tipc-utils, since (a) TIPC continues to treat references to the original port ID correctly and (b) normal use cases assign an address before active use. However if there does happen to be some rare/custom application out there that was relying on this, they can simply bypass the enhancement by issuing a subscription to {0,0} and break its connection to the topology service, if an associated withdrawal event occurs. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-26tipc: Optimize termination of configuration serviceAllan Stephens1-4/+2
Termination no longer tests to see if the configuration service port was successfully created or not. In the unlikely event that the port was not created, attempting to delete the non-existent port is detected gracefully and causes no harm. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-26tipc: Optimize initialization of configuration serviceAllan Stephens1-1/+1
Initialization now occurs in the calling thread of control, rather than being deferred to the TIPC tasklet. With the current codebase, the deferral is no longer necessary. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-26tipc: Optimize re-initialization of configuration serviceAllan Stephens3-2/+17
Streamlines the job of re-initializing TIPC's configuration service when a node's network address is first assigned. Rather than destroying the configuration server port and then recreating it, TIPC now simply withdraws the existing {0,<0.0.0>} name publication and creates a new {0,<Z.C.N>} name publication that identifies the node's network address to interested subscribers. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-24tipc: remove inline instances from C source files.Paul Gortmaker2-3/+3
Untie gcc's hands and let it do what it wants within the individual source files. There are two files, node.c and port.c -- only the latter effectively changes (gcc-4.5.2). Objdump shows gcc deciding to not inline port_peernode(). Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-23net: add a limit parameter to sk_add_backlog()Eric Dumazet1-1/+1
sk_add_backlog() & sk_rcvqueues_full() hard coded sk_rcvbuf as the memory limit. We need to make this limit a parameter for TCP use. No functional change expected in this patch, all callers still using the old sk_rcvbuf limit. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Cc: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19tipc: Ensure network address change doesn't impact configuration serviceAllan Stephens1-1/+1
Enhances command validation done by TIPC's configuration service so that it works properly even if the node's network address is changed in mid-operation. The default node address of <0.0.0> is now recognized as an alias for "this node" even after a new network address has been assigned. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: Ensure network address change doesn't impact rejected messageAllan Stephens1-1/+1
Revises handling of a rejected message to ensure that a locally originated message is returned properly even if the node's network address is changed in mid-operation. The routine now treats the default node address of <0.0.0> as an alias for "this node" when determining where to send a returned message. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: handle <0.0.0> as an alias for this node on outgoing msgsAllan Stephens1-4/+4
Revises handling of send routines for payload messages to ensure that they are processed properly even if the node's network address is changed in mid-operation. The routines now treat the default node address of <0.0.0> as an alias for "this node" when determining where to send an outgoing message. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: properly handle off-node send requests with invalid addrAllan Stephens1-2/+9
There are two send routines that might conceivably be asked by an application to send a message off-node when the node is still using the default network address. These now have an added check that detects this and rejects the message gracefully. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: take lock while updating node network addressAllan Stephens1-1/+2
The routine that changes the node's network address now takes TIPC's network lock in write mode while the main address variable and associated data structures are being changed; this is needed to ensure that the link subsystem won't attempt to send a message off-node until the sending port's message header template has been updated with the node's new network address. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: Ensure network address change doesn't impact local connectionsAllan Stephens4-31/+34
Revises routines that deal with connections between two ports on the same node to ensure the connection is not impacted if the node's network address is changed in mid-operation. The routines now treat the default node address of <0.0.0> as an alias for "this node" in the following situations: 1) Incoming messages destined to a connected port now handle the alias properly when validating that the message was sent by the expected peer port, ensuring that the message will be accepted regardless of whether it specifies the node's old network address or it's current one. 2) The code which completes connection establishment now handles the alias properly when determining if the peer port is on the same node as the connected port. An added benefit of addressing issue 1) is that some peer port validation code has been relocated to TIPC's socket subsystem, which means that validation is no longer done twice when a message is sent to a non-socket port (such as TIPC's configuration service or network topology service). Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: delete duplicate peerport/peernode helper functionsAllan Stephens2-14/+4
Prior to commit 23dd4cce387124ec3ea06ca30d17854ae4d9b772 "tipc: Combine port structure with tipc_port structure" there was a need for the two sets of helper functions. But now they are just duplicates. Remove the globally visible ones, and mark the remaining ones as inline. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: Ensure network address change doesn't impact new portAllan Stephens1-4/+11
Re-orders port creation logic so that the initialization of a new port's message header template occurs while the port list lock is held. This ensures that a change to the node's network address that occurs at the same time as the port is being created does not result in the template identifying the sender using the former network address. The new approach guarantees that the new port's template is using the current network address or that it will be updated when the address changes. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: Optimize re-initialization of port message header templatesAllan Stephens1-2/+0
Removes an unnecessary check in the logic that updates the message header template for existing ports when a node's network address is first assigned. There is no longer any need to check to see if the node's network address has actually changed since the calling routine has already verified that this is so. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: Ensure network address change doesn't impact name table updatesAllan Stephens1-4/+4
Revises routines that add and remove an entry from a node's name table so that the publication scope lists are updated properly even if the node's network address is changed in mid-operation. The routines now recognize the default node address of <0.0.0> as an alias for "this node" even after a new network address has been assigned. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: Add routines for safe checking of node's network addressAllan Stephens4-6/+24
Introduces routines that test whether a given network address is equal to a node's own network address or if it lies within the node's own network cluster, and which work properly regardless of whether the node is using the default network address <0.0.0> or a non-zero network address that is assigned later on. In essence, these routines ensure that address <0.0.0> is treated as an alias for "this node", regardless of which network address the node is actually using. Old users of the pre-existing more strict match in_own_cluster() have been accordingly redirected to what is now called in_own_cluster_exact() --- which does not extend matching to <0,0,0>. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: Don't record failed publication attempt as a successAllan Stephens1-2/+3
No longer increments counter of number of publications by a node if an attempt to add a new publication fails. This prevents TIPC from incorrectly blocking future publications because the configured maximum number of publications has been reached. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: Update node-scope publications when network address is assignedAllan Stephens2-7/+12
Ensures that node-scope name publications that exist prior to the configuration of a node's network address are properly re-initialized with that address when it is assigned. TIPC's node-scope publications are now tracked using a publications list like the lists used for cluster-scope and zone-scope publications so they can be easily updated when required. The inclusion of node scope name publications in a conventional publication list means that they must now also be withdrawn, just like cluster and zone scope publications are currently withdrawn. So some conditional tests on scope ==/!= TIPC_NODE_SCOPE are inserted/removed accordingly. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-19tipc: Separate cluster-scope and zone-scope names into distinct listsAllan Stephens1-5/+26
Utilizes distinct lists to track zone-scope and cluster-scope names published by a node. For now, TIPC continues to process the entries in both lists in the same way; however, an upcoming patch will utilize the existence of the lists to prevent the sending of cluster-scope names to nodes that are not part of the local cluster. To achieve this, an array of publication lists is introduced, so that they can be iterated over and accessed via publ->scope as an index where convenient. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-04-18tipc: Factor out name publication code to a separate functionAllan Stephens1-27/+34
This is done so that it can be reused with differing publication lists, instead of being hard coded to the cluster publicaton list. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 15:48:35 +0000