summaryrefslogtreecommitdiff
path: root/net/bluetooth
AgeCommit message (Collapse)AuthorFilesLines
2011-06-17Bluetooth: Fix locking in blacklist codeGustavo F. Padovan1-13/+25
There was no unlock call on the errors path Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-16Bluetooth: Use bit operations on conn_stateGustavo F. Padovan1-87/+74
Instead of setting bits manually we use set_bit, test_bit, etc. Also remove L2CAP_ prefix from macros. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-16Bluetooth: use bit operation on conf_stateGustavo F. Padovan2-44/+37
Instead of making the bit operations manually, we now use set_bit, test_bit, etc. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-16Bluetooth: Add blacklisting support for mgmt interfaceAntti Julku1-0/+70
Management interface commands for blocking and unblocking devices. Signed-off-by: Antti Julku <antti.julku@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-16Bluetooth: Move blacklisting functions to hci_coreAntti Julku2-64/+85
Move blacklisting functions to hci_core.c, so that they can be used by both management interface and hci socket interface. Signed-off-by: Antti Julku <antti.julku@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-15Bluetooth: Fix L2CAP connection establishmentIlia Kolomisnky1-1/+1
In hci_conn_security ( which is used during L2CAP connection establishment ) test for HCI_CONN_ENCRYPT_PEND state also sets this state, which is bogus and leads to connection time-out on L2CAP sockets in certain situations (especially when using non-ssp devices ) Signed-off-by: Ilia Kolomisnky <iliak@ti.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-14Bluetooth: Add key size checks for SMPVinicius Costa Gomes1-13/+41
This patch implements a check in smp cmd pairing request and pairing response to verify if encryption key maximum size is compatible in both slave and master when SMP Pairing is requested. Keys are also masked to the correct negotiated size. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-14Bluetooth: Add support for SMP timeoutVinicius Costa Gomes2-30/+58
This patch adds support for disconnecting the link when SMP procedure takes more than 30 seconds. SMP begins when either the Pairing Request command is sent or the Pairing Response is received, and it ends when the link is encrypted (or terminated). Vol 3, Part H Section 3.4. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-14Bluetooth: Fix accepting connect requests for defer_setupJohan Hedberg1-6/+15
When authentication completes we shouldn't blindly accept any pending L2CAP connect requests. If the socket has the defer_setup feature enabled it should still wait for user space acceptance of the connect request. The issue only happens for non-SSP connections since with SSP the L2CAP Connect request may not be sent for non-SDP PSMs before authentication has completed successfully. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: fix missing parameter for HCI_OP_DISCONNECTAnderson Lizardo1-1/+1
The "dc" variable is initialized but not passed to hci_send_cmd(). Signed-off-by: Anderson Lizardo <anderson.lizardo@openbossa.org> Signed-off-by: Bruna Moreira <bruna.moreira@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Add support for Pairing features exchangeVinicius Costa Gomes2-53/+54
This patch implements a simple version of the SMP Pairing Features exchange procedure (Vol. 3 Part H, Section 2.3.5.1). For now, everything that would cause a Pairing Method different of Just Works to be chosen is rejected. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Add support for building pairing commandsVinicius Costa Gomes1-0/+11
Before we are able to do a proper exchange of pairing parameters, we need a unified way of building pairing requests and responses. For IO Capability we use the value that was set by userspace, using the management interface. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Fix initial security level of LE linksVinicius Costa Gomes2-0/+2
As the default security level (BT_SECURITY_SDP) doesn't make sense for LE links, initialize LE links with something that makes sense. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Add support for resuming socket when SMP is finishedVinicius Costa Gomes3-42/+75
This adds support for resuming the user space traffic when SMP negotiation is complete. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Remove debug statementsVinicius Costa Gomes1-5/+1
Now that these commands are sent to the controller we can use hcidump to verify that the correct values are produced. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Add support for LE Start EncryptionVinicius Costa Gomes3-4/+128
This adds support for starting SMP Phase 2 Encryption, when the initial SMP negotiation is successful. This adds the LE Start Encryption and LE Long Term Key Request commands and related events. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Add SMP confirmation checks methodsAnderson Briglia1-14/+83
This patch includes support for generating and sending the random value used to produce the confirmation value. Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Add SMP confirmation structsAnderson Briglia1-0/+17
This patch adds initial support for verifying the confirmation value that the remote side has sent. Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Add LE SMP Cryptoolbox functionsAnderson Briglia1-0/+117
This patch implements SMP crypto functions called ah, c1, s1 and e. It also implements auxiliary functions. All These functions are needed for SMP keys generation. Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Anderson Lizardo <anderson.lizardo@openbossa.org> Signed-off-by: Bruna Moreira <bruna.moreira@openbossa.org> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Add support for using the crypto subsystemVinicius Costa Gomes3-4/+48
This will allow using the crypto subsystem for encrypting data. As SMP (Security Manager Protocol) is implemented almost entirely on the host side and the crypto module already implements the needed methods (AES-128), it makes sense to use it. There's now a new module option to enable/disable SMP support. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Add simple SMP pairing negotiationAnderson Briglia1-5/+102
This implementation only exchanges SMP messages between the Host and the Remote. No keys are being generated. TK and STK generation will be provided in further patches. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Start SMP procedureAnderson Briglia1-0/+9
Start SMP procedure for LE connections. This modification intercepts l2cap received frames and call proper SMP functions to start the SMP procedure. By now, no keys are being used. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Implement the first SMP commandsAnderson Briglia2-1/+147
These simple commands will allow the SMP procedure to be started and terminated with a not supported error. This is the first step toward something useful. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Don't forget to check for LE_LINKGustavo F. Padovan1-1/+1
Otherwise the wrong error can be returned. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: keep reference if any ERTM timer is enabledGustavo F. Padovan1-22/+22
ERTM use the generic L2CAP timer functions to keep a reference to the channel. This is useful for avoiding crashes. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Make timer functions genericGustavo F. Padovan1-29/+29
We now plan to use l2cap_set_timer and l2cap_clear_timer in ERTM timers. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Add refcnt to struct l2cap_chanGustavo F. Padovan1-9/+21
struct l2cap_chan has now its own refcnt that is compatible with the socket refcnt, i.e., we won't see sk_refcnt = 0 and chan->refcnt > 0. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Add state tracking to struct l2cap_chanGustavo F. Padovan2-54/+71
Now socket state is tracked by struct sock and channel state is tracked by chan->state. At this point both says the same, but this is going to change when we add AMP Support for example. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: add close() callback to l2cap_chan_opsGustavo F. Padovan2-9/+18
close() calls l2cap_sock_kill() on l2cap_sock.c Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: add recv() callback to l2cap_chan_opsGustavo F. Padovan2-8/+16
This abstracts the call to sock_queue_recv_skb() into l2cap_chan_ops->recv(). Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Add l2cap_chan_ops abstractionGustavo F. Padovan2-12/+34
Add an abstraction layer between L2CAP core and its users (only l2cap_sock.c now). The first function implemented is new_connection() that replaces calls to l2cap_sock_alloc() in l2cap_core.c Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Merge l2cap_chan_create() in the l2cap_sock_alloc()Gustavo F. Padovan2-24/+12
As a first step to remove l2cap_sock_alloc() and l2cap_sock_init() from l2cap_core.c Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-13Bluetooth: Fix L2CAP security checkLuiz Augusto von Dentz1-2/+2
With older userspace versions (using hciops) it might not have the key type to check if the key has sufficient security for any security level so it is necessary to check the return of hci_conn_auth to make sure the connection is authenticated Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-10Bluetooth: Do not send SET_EVENT_MASK for 1.1 and earlier devicesVille Tervo1-8/+10
Some old hci controllers do not accept any mask so leave the default mask on for these devices. < HCI Command: Set Event Mask (0x03|0x0001) plen 8 Mask: 0xfffffbff00000000 > HCI Event: Command Complete (0x0e) plen 4 Set Event Mask (0x03|0x0001) ncmd 1 status 0x12 Error: Invalid HCI Command Parameters Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Tested-by: Corey Boyle <corey@kansanian.com> Tested-by: Ed Tomlinson <edt@aei.ca> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-10Bluetooth: fix shutdown on SCO socketsLuiz Augusto von Dentz1-1/+12
shutdown should wait for SCO link to be properly disconnected before detroying the socket, otherwise an application using the socket may assume link is properly disconnected before it really happens which can be a problem when e.g synchronizing profile switch. Signed-off-by: Luiz Augusto von Dentz <luiz.dentz-von@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-09Merge master.kernel.org:/pub/scm/linux/kernel/git/padovan/bluetooth-2.6Gustavo F. Padovan4-10/+26
Conflicts: net/bluetooth/rfcomm/sock.c
2011-06-09Bluetooth: Kill set but unused variable 'cmd' in cmtp_recv_capimsg()David Miller1-2/+1
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-09Bluetooth: Do not send SET_EVENT_MASK for 1.1 and earlier devicesVille Tervo1-8/+10
Some old hci controllers do not accept any mask so leave the default mask on for these devices. < HCI Command: Set Event Mask (0x03|0x0001) plen 8 Mask: 0xfffffbff00000000 > HCI Event: Command Complete (0x0e) plen 4 Set Event Mask (0x03|0x0001) ncmd 1 status 0x12 Error: Invalid HCI Command Parameters Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Tested-by: Corey Boyle <corey@kansanian.com> Tested-by: Ed Tomlinson <edt@aei.ca> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-09Bluetooth: l2cap and rfcomm: fix 1 byte infoleak to userspace.Filip Palian2-0/+2
Structures "l2cap_conninfo" and "rfcomm_conninfo" have one padding byte each. This byte in "cinfo" is copied to userspace uninitialized. Signed-off-by: Filip Palian <filip.palian@pjwstk.edu.pl> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-09Bluetooth: fix shutdown on SCO socketsLuiz Augusto von Dentz1-1/+12
shutdown should wait for SCO link to be properly disconnected before detroying the socket, otherwise an application using the socket may assume link is properly disconnected before it really happens which can be a problem when e.g synchronizing profile switch. Signed-off-by: Luiz Augusto von Dentz <luiz.dentz-von@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-09Bluetooth: Silence DEBUG_STRICT_USER_COPY_CHECKS=y warningStephen Boyd1-1/+2
Enabling DEBUG_STRICT_USER_COPY_CHECKS causes the following warning: In function 'copy_from_user', inlined from 'rfcomm_sock_setsockopt' at net/bluetooth/rfcomm/sock.c:705: arch/x86/include/asm/uaccess_64.h:65: warning: call to 'copy_from_user_overflow' declared with attribute warning: copy_from_user() buffer size is not provably correct presumably due to buf_size being signed causing GCC to fail to see that buf_size can't become negative. Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Fix check for the ERTM local busy stateMat Martineau1-1/+1
Local busy is encoded in a bitfield, but was not masked out correctly. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Restore accidentally-deleted lineMat Martineau1-0/+1
When code was moved from l2cap_core.c to l2cap_sock.c in commit 6de0702b5b93da0ef097aa092b4597fbc024ebba, one line was dropped from the old __l2cap_sock_close() implementation. This sk_state change should still be in l2cap_chan_close(). Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Simplify hci_conn_accept_secure checkWaldemar Rymarkiewicz1-3/+1
If the link key is secure (authenticated or combination 16 digit) the sec_level will be always BT_SECURITY_HIGH. Therefore, instead of checking the link key type simply check the sec_level on the link. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Add BT_POWER L2CAP socket option.Jaikumar Ganesh4-5/+49
Add BT_POWER socket option used to control the power characteristics of the underlying ACL link. When the remote end has put the link in sniff mode and the host stack wants to send data we need need to explicitly exit sniff mode to work well with certain devices (For example, A2DP on Plantronics Voyager 855). However, this causes problems with HID devices. Hence, moving into active mode when sending data, irrespective of who set the sniff mode has been made as a socket option. By default, we will move into active mode. HID devices can set the L2CAP socket option to prevent this from happening. Currently, this has been implemented for L2CAP sockets. This has been tested with incoming and outgoing L2CAP sockets for HID and A2DP. Based on discussions on linux-bluetooth and patches submitted by Andrei Emeltchenko. Signed-off-by: Jaikumar Ganesh <jaikumar@google.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Verify a pin code in pin_code_replyWaldemar Rymarkiewicz1-12/+41
As we cannot relay on a userspace mgmt api implementation we should verify if pin_code_reply in fact contains the secure pin code. If userspace replied with unsecure pincode when secure was required we will send pin_code_neg_reply to the controller. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Remove a magic numberWaldemar Rymarkiewicz1-1/+1
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: fix sparse & gcc warningsJohannes Berg2-4/+4
sparse complains about a few things that should be static. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Set 'peer_addr_type' in hci_le_connect()Andre Guedes1-0/+1
Set the 'peer_addr_type' field of the LE Create Connection command sent in hci_le_connect(). Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-06-08Bluetooth: Check advertising cache in hci_connect()Andre Guedes1-0/+9
When connecting to a LE device, we need to check the advertising cache in order to know the address type of that device. If its advertising entry is not found, the connection is not established and hci_connect() returns error. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-09 01:06:25 +0000