summaryrefslogtreecommitdiff
path: root/net/bluetooth/hci_event.c
AgeCommit message (Collapse)AuthorFilesLines
2012-09-14Bluetooth: Fix legacy pairing with some devicesSzymon Janc1-1/+6
commit a9ea3ed9b71cc3271dd59e76f65748adcaa76422 upstream. Some devices e.g. some Android based phones don't do SDP search before pairing and cancel legacy pairing when ACL is disconnected. PIN Code Request event which changes ACL timeout to HCI_PAIRING_TIMEOUT is only received after remote user entered PIN. In that case no L2CAP is connected so default HCI_DISCONN_TIMEOUT (2 seconds) is being used to timeout ACL connection. This results in problems with legacy pairing as remote user has only few seconds to enter PIN before ACL is disconnected. Increase disconnect timeout for incomming connection to HCI_PAIRING_TIMEOUT if SSP is disabled and no linkey exists. To avoid keeping ACL alive for too long after SDP search set ACL timeout back to HCI_DISCONN_TIMEOUT when L2CAP is connected. 2012-07-19 13:24:43.413521 < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr 00:02:72:D6:6A:3F ptype 0xcc18 rswitch 0x01 clkoffset 0x0000 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 2012-07-19 13:24:43.425224 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 2012-07-19 13:24:43.885222 > HCI Event: Role Change (0x12) plen 8 status 0x00 bdaddr 00:02:72:D6:6A:3F role 0x01 Role: Slave 2012-07-19 13:24:44.054221 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 42 bdaddr 00:02:72:D6:6A:3F type ACL encrypt 0x00 2012-07-19 13:24:44.054313 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 42 2012-07-19 13:24:44.055176 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 bdaddr 00:02:72:D6:6A:3F mode 0 2012-07-19 13:24:44.056217 > HCI Event: Max Slots Change (0x1b) plen 3 handle 42 slots 5 2012-07-19 13:24:44.059218 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0 2012-07-19 13:24:44.062192 > HCI Event: Command Status (0x0f) plen 4 Unknown (0x00|0x0000) status 0x00 ncmd 1 2012-07-19 13:24:44.067219 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 42 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 2012-07-19 13:24:44.067248 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 handle 42 page 1 2012-07-19 13:24:44.071217 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 2012-07-19 13:24:44.076218 > HCI Event: Read Remote Extended Features (0x23) plen 13 status 0x00 handle 42 page 1 max 1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 2012-07-19 13:24:44.076249 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 bdaddr 00:02:72:D6:6A:3F mode 2 clkoffset 0x0000 2012-07-19 13:24:44.081218 > HCI Event: Command Status (0x0f) plen 4 Remote Name Request (0x01|0x0019) status 0x00 ncmd 1 2012-07-19 13:24:44.105214 > HCI Event: Remote Name Req Complete (0x07) plen 255 status 0x00 bdaddr 00:02:72:D6:6A:3F name 'uw000951-0' 2012-07-19 13:24:44.105284 < HCI Command: Authentication Requested (0x01|0x0011) plen 2 handle 42 2012-07-19 13:24:44.111207 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) status 0x00 ncmd 1 2012-07-19 13:24:44.112220 > HCI Event: Link Key Request (0x17) plen 6 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:44.112249 < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:44.115215 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Negative Reply (0x01|0x000c) ncmd 1 status 0x00 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:44.116215 > HCI Event: PIN Code Request (0x16) plen 6 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:48.099184 > HCI Event: Auth Complete (0x06) plen 3 status 0x13 handle 42 Error: Remote User Terminated Connection 2012-07-19 13:24:48.179182 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 42 reason 0x13 Reason: Remote User Terminated Connection Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14Bluetooth: Set name_state to unknown when entry name is emptyRam Malovany1-0/+2
commit c3e7c0d90b14a3e7ac091d24cef09efb516d587b upstream. When the name of the given entry is empty , the state needs to be updated accordingly. Signed-off-by: Ram Malovany <ramm@ti.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14Bluetooth: Fix using a NULL inquiry cache entryRam Malovany1-5/+11
commit 7cc8380eb10347016d95bf6f9d842c2ae6d12932 upstream. If the device was not found in a list of found devices names of which are pending.This may happen in a case when HCI Remote Name Request was sent as a part of incoming connection establishment procedure. Hence there is no need to continue resolving a next name as it will be done upon receiving another Remote Name Request Complete Event. This will fix a kernel crash when trying to use this entry to resolve the next name. Signed-off-by: Ram Malovany <ramm@ti.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-14Bluetooth: Fix using NULL inquiry entryRam Malovany1-0/+3
commit c810089c27e48b816181b454fcc493d19fdbc2ba upstream. If entry wasn't found in the hci_inquiry_cache_lookup_resolve do not resolve the name.This will fix a kernel crash when trying to use NULL pointer. Signed-off-by: Ram Malovany <ramm@ti.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14Bluetooth: mgmt: Fix device_connected sending orderJohan Hedberg1-2/+2
The mgmt_ev_device_connected signal must be sent before any event indications happen for sockets associated with the connection. Otherwise e.g. device authorization for the sockets will fail with ENOTCONN as user space things that there is no baseband link. This patch fixes the issue by ensuring that the device_connected event if sent (if it hasn't been so already) as soon as the first ACL data packet arrives from the remote device. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-14Bluetooth: notify userspace of security level changeGustavo Padovan1-0/+7
It fixes L2CAP socket based security level elevation during a connection. The HID profile needs this (for keyboards) and it is the only way to achieve the security level elevation when using the management interface to talk to the kernel (hence the management enabling patch being the one that exposes this issue). It enables the userspace a security level change when the socket is already connected and create a way to notify the socket the result of the request. At the moment of the request the socket is made non writable, if the request fails the connections closes, otherwise the socket is made writable again, POLL_OUT is emmited. Signed-off-by: Gustavo Padovan <gustavo@padovan.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-27Merge branch 'for-upstream' of ↵John W. Linville1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
2012-04-24Bluetooth: Fix missing break in hci_cmd_complete_evtSzymon Janc1-0/+1
Command complete event for HCI_OP_USER_PASSKEY_NEG_REPLY would result in calling handler function also for HCI_OP_LE_SET_SCAN_PARAM. This could result in undefined behaviour. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo Padovan <gustavo@padovan.org>
2012-04-16Bluetooth: Temporary keys should be retained during connectionVishal Agarwal1-0/+2
If a key is non persistent then it should not be used in future connections but it should be kept for current connection. And it should be removed when connecion is removed. Signed-off-by: Vishal Agarwal <vishal.agarwal@stericsson.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-03-28Remove all #inclusions of asm/system.hDavid Howells1-1/+0
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-08Bluetooth: fix conding style issues all over the treeGustavo F. Padovan1-57/+53
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2012-03-03Bluetooth: mgmt: Fix updating local name when powering onJohan Hedberg1-8/+0
When powering on we need to apply whatever name has been set through mgmt_set_local_name. The appropriate place for this is mgmt_powered() and not hci_setup() since this needs to be applied also if the HCI init sequence was already completed but the adapter was still "powered off" from a mgmt perspective due the the HCI_AUTO_OFF still being set. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-03-02Bluetooth: Fix clearing of HCI_PENDING_CLASS flagJohan Hedberg1-1/+1
When doing reset HCI_PENDING_CLASS is one of the flags that should be cleared (since it's used for a pending HCI command and a reset clear all pending commands). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-03-01Bluetooth: Fix coding style with breaking linesGustavo F. Padovan1-1/+2
Our limit is 80 and broken lines should as right as possible. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2012-02-29Bluetooth: Use NULL instead of integer for mgmt_device_connected paramSzymon Janc1-1/+1
Last param of mgmt_device_connected is of pointer type, so use NULL instead of 0 for it. This fix following sparse warning: CHECK net/bluetooth/hci_event.c net/bluetooth/hci_event.c:3262:74: warning: Using plain integer as NULL pointer Signed-off-by: Szymon Janc <szymon@janc.net.pl> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-28Bluetooth: Use LMP_HOST_SSP define instead of magic valuesJohan Hedberg1-3/+3
This patch fixes the code to use the proper LMP_HOST_SSP define instead of magic values and thereby makes the code more readable. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-28Bluetooth: Remove redundant read_host_features commandsJohan Hedberg1-25/+34
Previously the write_le_enable would trigger a read_host_features command but since we have access to the value LE support was set to we can simply just clear or set the bit in hdev->host_features. This also removes a second unnecessary read_host_features command from the device initialization procedure since LE is only enabled after the first read_host_features command completes. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-24Bluetooth: Fix init request completion with AMP controllersAndrei Emeltchenko1-1/+4
Mark request status as done for Read Local Version HCI command. In AMP initialization this HCI command is the last and needs to be completed. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-24Bluetooth: Fix init request completion with old controllersJohan Hedberg1-0/+2
With Bluetooth 1.1 controllers the last command in the HCI init sequence will be a write_local_name, however there was no callback to indicate init request completion in this case. This patch fixes the issue by adding the necessary callback to the write_local_name_complete handler. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-23Bluetooth: mgmt: Add flags parameter to device_connectedJohan Hedberg1-4/+4
This patch updates the Device Connected events to match the latest API by adding a flags parameter to them. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: Set DISCOVERY_STOPPED if controller resetsAndre Guedes1-0/+2
If controller is reset during the discovery procedure, Start Discovery command stops working. This can be easily reproduced by running "hciconfig hci0 reset" while discovering devices, for instance. We should force discovery state to DISCOVERY_STOPPED in case we receive a reset command complete event. Otherwise we may stuck in one of the active discovery states (DISCOVERY_INQUIRY, DISCOVERY_LE_SCAN and DISCOVERY_RESOLVING) and subsequent Start Discovery commands will simply fail. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-23Bluetooth: mgmt: Add legacy pairing info to dev_found eventsJohan Hedberg1-12/+14
This patch makes sure that legacy pairing vs SSP infomation gets properly propageted to the device_found events in the form of the legacy pairing flag. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Allow local name changes while powered offJohan Hedberg1-3/+10
This patch makes it possible to set the local name before powering on the device. The name will be applied using the hci_write_local_name command once the device gets powered on. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: Fix read_name updating when HCI_SETUP is not setJohan Hedberg1-1/+2
The local name should only be updated as a consequence of a hci_read_local_name if we are in the HCI_SETUP state. In all other scenarios it should only be updated through hci_write_local_name. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: Send management event for class of device changesMarcel Holtmann1-4/+9
Currently there are no events to other management sockets if the class of device got changed. So make sure they are sent. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-23Bluetooth: mgmt: Fix updating EIR when updating the nameJohan Hedberg1-3/+3
Whenever we update the local device name the EIR data also needs to be updated to reflect this. The update_eir() function in mgmt.c depends on hdev->dev_name to be up to date so the patch also makes sure that the mgmt function is called from hci_event.c after the update has happened. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Implement Set LE commandJohan Hedberg1-1/+6
This patch implements support for the Set LE mgmt command. Now, in addition to the enable_le module parameter user space needs to send an explicit Enable LE command to enable LE support. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: Explicitly clear EIR data upon hci_dev setupJohan Hedberg1-4/+13
Some controllers preserve their EIR data even after a reset so we need to explicitly clear this during the device setup procedure. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Make Set SSP command callable while powered offJohan Hedberg1-11/+9
This patch makes it possible to enable SSP through mgmt even when powered off. The setting will then get automatically actiated when powering on. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: Remove unneeded hci_cc_read_ssp_mode functionJohan Hedberg1-19/+0
The kernel has no need to track the hci_read_ssp_mode command since it has the hci_sent_cmd_data function to check what value was set when hci_write_ssp_mode completes. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Make Set Link Security callable while powered offJohan Hedberg1-0/+6
This patch makes it possible to change the Link Security setting while powered off and have it automatically enabled when powering on a device. To track the desired state once powered on a new HCI_LINK_SECURITY flag is added. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-21Bluetooth: Fix clearing of persistent dev_flagsJohan Hedberg1-3/+2
Now that most flags are persistent, only the LE_SCAN flag should be cleared after a reset. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-20Bluetooth: Set supported settings based on enabled HS and/or LEMarcel Holtmann1-5/+0
Since neither High Speed (HS) nor Low Energy (LE) are fully implemented yet, only expose them in supported settings when enabled. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-20Bluetooth: Remove HCI notifier handlingMarcel Holtmann1-29/+0
The HCI notifier handling was never used outside of Bluetooth core layer and thus remove it and replace it with direct function calls. Also move the stack internal event generation into the HCI socket layer. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-20Bluetooth: Split sending for HCI raw and control socketsMarcel Holtmann1-1/+1
The sending functions for HCI raw and control sockets have nothing in common except that they iterate over the socket list. Split them into two so they can do their job more efficient. In addition the code becomes more readable. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-19Bluetooth: Interleaved discovery supportAndre Guedes1-4/+9
This patch adds interleaved discovery support to MGMT Start Discovery command. In case interleaved discovery is not supported (not a dual mode device), we perform BR/EDR or LE-only discovery according to the device capabilities. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-19Bluetooth: Merge INQUIRY and LE_SCAN discovery statesAndre Guedes1-3/+3
This patch merges DISCOVERY_INQUIRY and DISCOVERY_LE_SCAN states into a new state called DISCOVERY_FINDING. From the discovery perspective, we are pretty much worried about to know just if we are finding devices than what exactly phase of "finding devices" (inquiry or LE scan) we are currently running. Besides, to know if the controller is performing inquiry or LE scan we should check HCI_INQUIRY or HCI_LE_SCAN bits in hdev flags. Moreover, merging this two states will simplify the discovery state machine and will keep interleaved discovery implementation simpler. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-17Bluetooth: mgmt: Add support for Set SSP commandJohan Hedberg1-1/+5
The Set SSP mgmt command can be used for enabling and disabling Secure Simple Pairing support for controllers that support it. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-17Bluetooth: mgmt: Add support for Set Link Security commandJohan Hedberg1-0/+3
The Set Link Security mgmt command is used to enable or disable link level security, also known as Security Mode 3. This is rarely enabled in modern systems but the command needs to be available for completeness, qualification purposes and those few systems that actually want to enable it. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-13Bluetooth: Add address type to mgmt_ev_auth_failedJohan Hedberg1-2/+4
This patch updates the Authentication Failed mgmt event to match the latest API specification by adding an address type to it. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-13Bluetooth: Add address type to user_confirm and user_passkey messagesJohan Hedberg1-6/+8
This patch upadate the user confirm and user passkey mgmt messages to match the latest API specification by adding an address type parameter to them. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-13Bluetooth: Update mgmt_disconnect to match latest APIJohan Hedberg1-3/+25
This patch adds an address type parameter to the disconnect command and response in order to match the latest mgmt API specification. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-13Bluetooth: MGMT start discovery LE-Only supportAndre Guedes1-1/+12
This patch adds LE-Only discovery procedure support to MGMT Start Discovery command. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Add hci_do_le_scan()Andre Guedes1-3/+10
This patch adds to hci_core the hci_do_le_scan function which should be used to scan LE devices. In order to enable LE scan, hci_do_le_scan() sends commands (Set LE Scan Parameters and Set LE Scan Enable) to the controller and waits for its results. If commands were executed successfully a delayed work is scheduled to disable the ongoing scanning after some amount of time. This function blocks. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: LE scan should send Discovering eventsAndre Guedes1-0/+5
Send MGMT Discovering events once LE scan starts/stops so the userspace can track when local adapters are discovering LE devices. This way, we also keep the same behavior of inquiry which sends MGMT Discovering events once inquiry starts/stops even if it is triggered by an external tool (e.g. hcitool). Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Use the updated key structures for handling LTKsVinicius Costa Gomes1-2/+9
This updates all the users of the older way, that was using the link_keys list to store the SMP keys, to use the new way. This includes defining new types for the keys, we have a type for each combination of STK/LTK and Master/Slave. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Fix clearing of debug and linkkey flagsHemant Gupta1-1/+2
This patch fixes clearing of HCI_LINK_KEYS and HCI_DEBUG_KEYS dev_flags while resetting. Without this patch pairing does not work over management interface for BR-EDR devices. Signed-off-by: Hemant Gupta <hemant.gupta@stericsson.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Send correct response to IO Capability RequestHemant Gupta1-1/+4
This patch sends correct IO Capability response to remote device in case Local Device supports KeyBoardDisplay IO Capability as this capability is not valid as per BT spec for IO capability Request Reply Command. This capability is mapped to DisplayYesNo which is in accordance with BT spec. Signed-off-by: Hemant Gupta <hemant.gupta@stericsson.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-13Bluetooth: Add a convenience function to check for SSP enabledJohan Hedberg1-8/+4
It's a very common test to see if both the local and the remote device have SSP enabled. By creating a simple function to test this we can shorten many if-statements in the code. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-13Bluetooth: Convert hdev->ssp_mode to a flagJohan Hedberg1-5/+12
The ssp_mode is essentially just a boolean so it's more appropriate to have it simply as a flag in hdev->dev_flags. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-01 21:29:01 +0000