summaryrefslogtreecommitdiff
path: root/lib/spinlock_debug.c
AgeCommit message (Collapse)AuthorFilesLines
2012-10-06lib/spinlock_debug: avoid livelock in do_raw_spin_lock()Vikram Mulukutla1-14/+18
The logic in do_raw_spin_lock() attempts to acquire a spinlock by invoking arch_spin_trylock() in a loop with a delay between each attempt. Now consider the following situation in a 2 CPU system: 1. CPU-0 continually acquires and releases a spinlock in a tight loop; it stays in this loop until some condition X is satisfied. X can only be satisfied by another CPU. 2. CPU-1 tries to acquire the same spinlock, in an attempt to satisfy the aforementioned condition X. However, it never sees the unlocked value of the lock because the debug spinlock code uses trylock instead of just lock; it checks at all the wrong moments - whenever CPU-0 has locked the lock. Now in the absence of debug spinlocks, the architecture specific spinlock code can correctly allow CPU-1 to wait in a "queue" (e.g., ticket spinlocks), ensuring that it acquires the lock at some point. However, with the debug spinlock code, livelock can easily occur due to the use of try_lock, which obviously cannot put the CPU in that "queue". This queueing mechanism is implemented in both x86 and ARM spinlock code. Note that the situation mentioned above is not hypothetical. A real problem was encountered where CPU-0 was running hrtimer_cancel with interrupts disabled, and CPU-1 was attempting to run the hrtimer that CPU-0 was trying to cancel. Address this by actually attempting arch_spin_lock once it is suspected that there is a spinlock lockup. If we're in a situation that is described above, the arch_spin_lock should succeed; otherwise other timeout mechanisms (e.g., watchdog) should alert the system of a lockup. Therefore, if there is a genuine system problem and the spinlock can't be acquired, the end result (irrespective of this change being present) is the same. If there is a livelock caused by the debug code, this change will allow the lock to be acquired, depending on the implementation of the lower level arch specific spinlock code. [akpm@linux-foundation.org: tweak comment] Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30spinlock_debug: print offset in addition to symbol nameStephen Boyd1-1/+1
If there are two spinlocks embedded in a structure that kallsyms knows about and one of the spinlocks locks up we will print the name of the containing structure instead of the address of the lock. This is quite bad, so let's use %pS instead of %ps so we get an offset in addition to the symbol so we can determine which particular lock is having problems. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-06spinlock: Indicate that a lockup is only suspectedChristian Borntraeger1-1/+1
On an over-committed KVM system we got a: "BUG: spinlock lockup on CPU#2, swapper/2/0" message on the heavily contended virtio blk spinlock. While we might want to reconsider the locking of virtio-blk (lock is held while switching to the host) this patch tries to make the message clearer: the lockup is only suspected. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338283124-7063-1-git-send-email-borntraeger@de.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-29spinlock_debug: print kallsyms name for lockStephen Boyd1-1/+1
When a spinlock warning is printed we usually get BUG: spinlock bad magic on CPU#0, modprobe/111 lock: 0xdff09f38, .magic: 00000000, .owner: /0, .owner_cpu: 0 but it's nicer to print the symbol for the lock if we have it so that we can avoid 'grep dff09f38 /proc/kallsyms' to find out which lock it was. Use kallsyms to print the symbol name so we get something a bit easier to read BUG: spinlock bad magic on CPU#0, modprobe/112 lock: test_lock, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 If the lock is not in kallsyms %ps will fall back to printing the address directly. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-07lib: reduce the use of module.h wherever possiblePaul Gortmaker1-1/+1
For files only using THIS_MODULE and/or EXPORT_SYMBOL, map them onto including export.h -- or if the file isn't even using those, then just delete the include. Fix up any implicit include dependencies that were being masked by module.h along the way. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31lib/spinlock_debug.c: print owner on spinlock lockupAkinobu Mita1-9/+10
When SPIN_BUG_ON is triggered, the lock owner information is reported. But it is omitted when spinlock lockup is detected. This information is useful especially on the architectures which don't implement trigger_all_cpu_backtrace() that is called just after detecting lockup. So report it and also avoid message format duplication. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-14locking: Further name space cleanupsThomas Gleixner1-9/+9
The name space hierarchy for the internal lock functions is now a bit backwards. raw_spin* functions map to _spin* which use __spin*, while we would like to have _raw_spin* and __raw_spin*. _raw_spin* is already used by lock debugging, so rename those funtions to do_raw_spin* to free up the _raw_spin* name space. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Ingo Molnar <mingo@elte.hu>
2009-12-14locking: Implement new raw_spinlockThomas Gleixner1-12/+12
Now that the raw_spin name space is freed up, we can implement raw_spinlock and the related functions which are used to annotate the locks which are not converted to sleeping spinlocks in preempt-rt. A side effect is that only such locks can be used with the low level lock fsunctions which circumvent lockdep. For !rt spin_* functions are mapped to the raw_spin* implementations. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Ingo Molnar <mingo@elte.hu>
2009-12-14locking: Convert raw_rwlock functions to arch_rwlockThomas Gleixner1-8/+8
Name space cleanup for rwlock functions. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: linux-arch@vger.kernel.org
2009-12-14locking: Convert raw_rwlock to arch_rwlockThomas Gleixner1-1/+1
Not strictly necessary for -rt as -rt does not have non sleeping rwlocks, but it's odd to not have a consistent naming convention. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: linux-arch@vger.kernel.org
2009-12-14locking: Convert __raw_spin* functions to arch_spin*Thomas Gleixner1-4/+4
Name space cleanup. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: linux-arch@vger.kernel.org
2009-12-14locking: Rename __RAW_SPIN_LOCK_UNLOCKED to __ARCH_SPIN_LOCK_UNLOCKEDThomas Gleixner1-1/+1
Further name space cleanup. No functional change Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: linux-arch@vger.kernel.org
2009-12-14locking: Convert raw_spinlock to arch_spinlockThomas Gleixner1-1/+1
The raw_spin* namespace was taken by lockdep for the architecture specific implementations. raw_spin_* would be the ideal name space for the spinlocks which are not converted to sleeping locks in preempt-rt. Linus suggested to convert the raw_ to arch_ locks and cleanup the name space instead of using an artifical name like core_spin, atomic_spin or whatever No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: linux-arch@vger.kernel.org
2007-10-19Use helpers to obtain task pid in printksPavel Emelyanov1-4/+4
The task_struct->pid member is going to be deprecated, so start using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in the kernel. The first thing to start with is the pid, printed to dmesg - in this case we may safely use task_pid_nr(). Besides, printks produce more (much more) than a half of all the explicit pid usage. [akpm@linux-foundation.org: git-drm went and changed lots of stuff] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-07[PATCH] x86: all cpu backtraceAndrew Morton1-0/+4
When a spinlock lockup occurs, arrange for the NMI code to emit an all-cpu backtrace, so we get to see which CPU is holding the lock, and where. Cc: Andi Kleen <ak@muc.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Andi Kleen <ak@suse.de>
2006-10-11Lockdep: add lockdep_set_class_and_subclass() and lockdep_set_subclass()Peter Zijlstra1-2/+2
This annotation makes it possible to assign a subclass on lock init. This annotation is meant to reduce the _nested() annotations by assigning a default subclass. One could do without this annotation and rely on lockdep_set_class() exclusively, but that would require a manual stack of struct lock_class_key objects. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-09-29[PATCH] spinlock_debug: don't recompute (jiffies_per_loop * HZ) in spinloopChuck Ebbert1-6/+9
In spinlock_debug.c, the spinloops call __delay() on every iteration. Because that is an external function, (jiffies_per_loop * HZ), the loop's iteration limit, gets recomputed every time. Caching it explicitly prevents that. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06[PATCH] disable debugging version of write_lock()Andrew Morton1-4/+6
We've confirmed that the debug version of write_lock() can get stuck for long enough to cause NMI watchdog timeouts and hence a crash. We don't know why, yet. Disable it for now. Also disable the similar read_lock() code. Just in case. Thanks to Dave Olson <olson@unixfolk.com> for reporting and testing. Acked-by: Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03[PATCH] lockdep: prove spinlock rwlock locking correctnessIngo Molnar1-0/+36
Use the lock validator framework to prove spinlock and rwlock locking correctness. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03[PATCH] lockdep: better lock debuggingIngo Molnar1-36/+26
Generic lock debugging: - generalized lock debugging framework. For example, a bug in one lock subsystem turns off debugging in all lock subsystems. - got rid of the caller address passing (__IP__/__IP_DECL__/etc.) from the mutex/rtmutex debugging code: it caused way too much prototype hackery, and lockdep will give the same information anyway. - ability to do silent tests - check lock freeing in vfree too. - more finegrained debugging options, to allow distributions to turn off more expensive debugging features. There's no separate 'held mutexes' list anymore - but there's a 'held locks' stack within lockdep, which unifies deadlock detection across all lock classes. (this is independent of the lockdep validation stuff - lockdep first checks whether we are holding a lock already) Here are the current debugging options: CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y which do: config DEBUG_MUTEXES bool "Mutex debugging, basic checks" config DEBUG_LOCK_ALLOC bool "Detect incorrect freeing of live mutexes" Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel1-1/+0
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-02-07[PATCH] Fix spinlock debugging delays to not time out too earlyIngo Molnar1-3/+3
The spinlock-debug wait-loop was using loops_per_jiffy to detect too long spinlock waits - but on fast CPUs this led to a way too fast timeout and false messages. The fix is to include a __delay(1) call in the loop, to correctly approximate the intended delay timeout of 1 second. The code assumes that every architecture implements __delay(1) to last around 1/(loops_per_jiffy*HZ) seconds. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] printk levels for spinlock debugDave Jones1-7/+11
Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-20[PATCH] fix spinlock-debugging smp_processor_id() usageIngo Molnar1-8/+10
When a spinlock debugging check hits, we print the CPU number as an informational thing - but there is no guarantee that preemption is off at that point - hence we should use raw_smp_processor_id(). Otherwise DEBUG_PREEMPT will print a warning. With this fix the warning goes away and only the spinlock-debugging info is printed. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10[PATCH] spinlock consolidationIngo Molnar1-0/+257
This patch (written by me and also containing many suggestions of Arjan van de Ven) does a major cleanup of the spinlock code. It does the following things: - consolidates and enhances the spinlock/rwlock debugging code - simplifies the asm/spinlock.h files - encapsulates the raw spinlock type and moves generic spinlock features (such as ->break_lock) into the generic code. - cleans up the spinlock code hierarchy to get rid of the spaghetti. Most notably there's now only a single variant of the debugging code, located in lib/spinlock_debug.c. (previously we had one SMP debugging variant per architecture, plus a separate generic one for UP builds) Also, i've enhanced the rwlock debugging facility, it will now track write-owners. There is new spinlock-owner/CPU-tracking on SMP builds too. All locks have lockup detection now, which will work for both soft and hard spin/rwlock lockups. The arch-level include files now only contain the minimally necessary subset of the spinlock code - all the rest that can be generalized now lives in the generic headers: include/asm-i386/spinlock_types.h | 16 include/asm-x86_64/spinlock_types.h | 16 I have also split up the various spinlock variants into separate files, making it easier to see which does what. The new layout is: SMP | UP ----------------------------|----------------------------------- asm/spinlock_types_smp.h | linux/spinlock_types_up.h linux/spinlock_types.h | linux/spinlock_types.h asm/spinlock_smp.h | linux/spinlock_up.h linux/spinlock_api_smp.h | linux/spinlock_api_up.h linux/spinlock.h | linux/spinlock.h /* * here's the role of the various spinlock/rwlock related include files: * * on SMP builds: * * asm/spinlock_types.h: contains the raw_spinlock_t/raw_rwlock_t and the * initializers * * linux/spinlock_types.h: * defines the generic type and initializers * * asm/spinlock.h: contains the __raw_spin_*()/etc. lowlevel * implementations, mostly inline assembly code * * (also included on UP-debug builds:) * * linux/spinlock_api_smp.h: * contains the prototypes for the _spin_*() APIs. * * linux/spinlock.h: builds the final spin_*() APIs. * * on UP builds: * * linux/spinlock_type_up.h: * contains the generic, simplified UP spinlock type. * (which is an empty structure on non-debug builds) * * linux/spinlock_types.h: * defines the generic type and initializers * * linux/spinlock_up.h: * contains the __raw_spin_*()/etc. version of UP * builds. (which are NOPs on non-debug, non-preempt * builds) * * (included on UP-non-debug builds:) * * linux/spinlock_api_up.h: * builds the _spin_*() APIs. * * linux/spinlock.h: builds the final spin_*() APIs. */ All SMP and UP architectures are converted by this patch. arm, i386, ia64, ppc, ppc64, s390/s390x, x64 was build-tested via crosscompilers. m32r, mips, sh, sparc, have not been tested yet, but should be mostly fine. From: Grant Grundler <grundler@parisc-linux.org> Booted and lightly tested on a500-44 (64-bit, SMP kernel, dual CPU). Builds 32-bit SMP kernel (not booted or tested). I did not try to build non-SMP kernels. That should be trivial to fix up later if necessary. I converted bit ops atomic_hash lock to raw_spinlock_t. Doing so avoids some ugly nesting of linux/*.h and asm/*.h files. Those particular locks are well tested and contained entirely inside arch specific code. I do NOT expect any new issues to arise with them. If someone does ever need to use debug/metrics with them, then they will need to unravel this hairball between spinlocks, atomic ops, and bit ops that exist only because parisc has exactly one atomic instruction: LDCW (load and clear word). From: "Luck, Tony" <tony.luck@intel.com> ia64 fix Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjanv@infradead.org> Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <willy@debian.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Mikael Pettersson <mikpe@csd.uu.se> Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>