Age | Commit message (Collapse) | Author | Files | Lines |
|
To confirm NULL point exception and also follow the common convention
of 'for loop' control, fix the driver to use scalar variable,
'num_chargers' when it retrieves the power_supply pointer array.
Change-Id: Iab834cf93822b1a03419ca9933e82d6396cc0474
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
|
|
cm_notify_event() is introduced to get event associated with battery status
externally, but no one had been used. Moreover it makes charger manager
driver more complicated. This patch tries to drop the function and all data
related to simplify the driver.
Change-Id: I89d802f57a3005c9102e8d342318f2bf77ccce48
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
|
|
Monitoring battery temperature becomes mandatory for charger manager working.
If there is no way to measure temperature, it stops probing and won't work.
And also it will use thermal susbsystem inteface only to make driver simple.
Change-Id: Idef5f8f29a104f5f51532c3321f6bebe887deb24
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
|
|
To guerantee proper charing and managing batteries even in suspend,
charger-manager has used rtc device with rtc framework interface.
However, it is better to use alarmtimer for cleaner and more appropriate
operation.
This patch makes driver to use alamtimer for polling work in suspend and
removes all deprecated codes related with using rtc interface.
Change-Id: I0c84ccd62653b50fc9c9b687fddcaba7ea58e8ca
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
|
|
Drop all local commits and adjust it to up-to-date version of mainline
to make it easy to maintain.
Change-Id: Id5dc3314afd6498e704bcc1bdebe2c226b8fa07c
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
|
|
Add functions needed for hooking up alarmtimer to timerfd:
* alarm_restart: Similar to hrtimer_restart, restart an alarmtimer after
the expires time has already been updated (as with alarm_forward).
* alarm_forward_now: Similar to hrtimer_forward_now, move the expires
time forward to an interval from the current time of the associated clock.
* alarm_start_relative: Start an alarmtimer with an expires time relative to
the current time of the associated clock.
* alarm_expires_remaining: Similar to hrtimer_expires_remaining, return the
amount of time remaining until alarm expiry.
Change-Id: I609e268d53725b2c2b62b618ccc388f4329997f5
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
This patch introduces a device tree bindings for
describing the hardware thermal behavior and limits.
Also a parser to read and interpret the data and feed
it in the thermal framework is presented.
This patch introduces a thermal data parser for device
tree. The parsed data is used to build thermal zones
and thermal binding parameters. The output data
can then be used to deploy thermal policies.
This patch adds also documentation regarding this
API and how to define tree nodes to use
this infrastructure.
Note that, in order to be able to have control
on the sensor registration on the DT thermal zone,
it was required to allow changing the thermal zone
.get_temp callback. For this reason, this patch
also removes the 'const' modifier from the .ops
field of thermal zone devices.
Change-Id: Iaecd480e8a5e21f0d3154cc9bf782bbfd051d40a
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
|
|
Currently, all the power supply devices are registered with wakeup source,
this results in that every power_supply_changed() invocation brings
the system out of suspend-to-freeze state.
This is overkill as some device drivers, e.g. ACPI battery driver,
have the ability to check the device status and wake up the system
from sleeping only when necessary.
Thus introduce a new API which allows device to be registered
w/o wakeup source.
Change-Id: If0ea9720c9c2161e3a33db0988bcd464b79f2b91
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add method to get power supply by device tree phandle.
Change-Id: I486cb12098d96a0c0b1a930b194dd899fb5a61c8
Signed-off-by: Sebastian Reichel <sre@debian.org>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
|
|
This patch adds a notifier chain to the power_supply, this helps drivers
in other subsystem to listen to changes in power supply subsystem.
This would help to take some actions in those drivers on changing the
power supply properties. One such scenario is to increase/decrease system
performance based on the battery capacity/voltage. Another scenario is to
adjust the h/w peak current detection voltage/current thresholds based on
battery voltage/capacity. The notifier helps drivers to listen to changes
in power_suppy susbystem without polling the power_supply properties
Change-Id: I06d5b614d1ad836826f87f24791c94d2fa6c4aa6
Signed-off-by: Jenny TC <jenny.tc@intel.com>
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Jenny TC <jenny.tc@intel.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
|
|
This patch, originally authored by Arve Hjonnevag and Todd Poynor,
prevents the system from entering suspend mode until the power supply
plug, unplug, or any other change of state event is fully processed. This
guarantees that the screen lights up and displays the battery charging
state. The implementation uses the power supply wakeup_source object.
Change-Id: I541e6a5d0567f2a731f14abc16fda30256ae93fe
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Arve Hjonnevag <arve@android.com>
Cc: Todd Poynor <toddpoynor@google.com>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Zoran Markovic <zoran.markovic@linaro.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
|
|
This patch adds exynos drm sc driver for Exynos 3250.
Change-Id: Ia71c5354390e67494fd4887c8861a624d21e3839
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
|
|
Some device depentent mchine revision. So this patch add get machine revision
function. Machine revision get from device tree. If device tree haven't
'revision' property, function return zero.
Change-Id: Ide2bdd314db334643e5acaabf31d8abc133a51dc
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
|
|
|
|
This patch support dynamic range for color space conversion.
COLOR_RANGE_LIMITED: selects narrow -> Y(16 to 235), Cb/Cr(16 to 240)
COLOR_RANGE_FULL: selects wide -> Y/Cb/Cr(0 to 255), Wide default
Change-Id: I7bb62883b497b5b6869108247cc33b09c07f470e
Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
|
|
This patch add new 'load_table' debugfs file to show previous accumulated data
of CPUs load as following path and add CPUFREQ_LOADCHECK notification to
CPUFREQ_TRANSITION_NOTIFIER notifier chain.
- /sys/kernel/debug/cpufreq/cpuX/load_table
When governor calculates CPUs load on dbs_check_cpu(), governor send
CPUFREQ_LOADCHECK notification with CPUs load, so that cpufreq_stats
accumulates calculated CPUs load on 'load_table' storage.
This debugfs file is used to judge the correct system state or determine
suitable system resource according to current CPUs load on user-space.
This debugfs file include following data:
- Measurement point of time
- CPU frequency
- Per-CPU load
Changes since v6:
- Remove unnecessary memory free/allocation operation on
cpufreq_stats_reset_debugfs()
- Get correct index of cpu_debugfs[] array according to cpu number
- Reset 'load_table' data when cpufreq governor is changed or updated because
specific governor(e.g., performance/powersave) haven't used 'load_table;
debugfs file.
Changes since v5:
- Determine index value of policy->cpu_debugfs[] according to
cpumask_weight(policy->cpus) value
- Bug fix, store 'policy->cpu' to 'freq->cpu' before notify
CPUFREQ_LOADCHECK notification
Changes since v4:
- Reset the data of CPUs load when cpufreq governor is changed
- Move code about creating debugfs directory to below first patch
: [PATCH 1/2] cpufreq: Add debugfs directory for cpufreq
Changes since v3:
- Extend a range of accumulated data (10 ~ 1000)
- Add unit information of time/freq and align 'Time' field as left for readability
- Use CONFIG_CPU_FREQ_STAT depdendency instead of CONFIG_CPU_FREQ_STAT_DETATILS
- Initialize load of offline CPUx as zero(0)
- Create/remove debugfs root directory on cpufreq_stats_init/exit() because
debugfs root is used on all CPUs.
Changes since v2:
- Code clean according to Viresh Kumar's comment
- Show both old frequency and new frequency on 'load_table' debugfs file
- Change debufs file patch as below
old: /sys/kernel/debugfs/cpufreq/load_table
new: /sys/kernel/debugfs/cpufreq/cpuX/load_table
Changes since v1:
- Set maximum storage size to save CPUs load on Kconfig
- Use spinlock to synchronize read/write operation for CPUs load
- Use local variable instead of global variable(struct cpufreq_freqs *freqs)
- Use pointer of data structure to get correct size of data structure
in sizeof() macro instead of structure name
: sizeof(struct cpufreq_freqs) -> sizeof(*stat->load_table)
- Change time unit from nanosecond to microsecond
- Remove unnecessary memory copy
Change-Id: I14e68196360a3ec00a36e7357b8c73c887abddce
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
|
|
This patch create debugfs root directory and child directory according to
the number of CPUs for CPUFreq as below debugfs directory path:
- /sys/kernel/debug/cpufreq/cpuX
If many CPUs share only one cpufreq policy, other CPUs(except for first CPU)
create a symbolic link for debugfs directory of CPU0.
- link: /sys/kernel/debug/cpufreq/cpu[1-(N-1)] -> /sys/kernel/debug/cpufreq/cpu0
And then cpufreq may need to create debugfs specific file below of debugfs
directory of cpufreq. (e.g., /sys/kernel/debug/cpufreq/cpu0/load_table)
Changes since v6:
- Use 'policy->related_cpus' instead of 'policy->cpus' when getting the number
of CPUs included in the same package
- Get correct index of cpu_debugfs[] array according to cpu number
- Refactoring cpufreq_move_debugfs_dir() / cpufreq_create_debugfs_symlink()
- Use for_each_cpu() to support multi cluster instead of for_each_present_cpu()
Changes since v5:
- Refactoring patch v4
- Create again symbolic link of debugfs directory when first CPU dev is removed
(In this case, many CPUs share only one cpufreq policy)
Change-Id: Ibd84118e6dd3b1e3bc624e1871d39425c99b1673
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
|
|
This patch supports exynos drm display writeback mode that clone
the screen with fimd like below.
FIMD----->FIMC H/W---->MEMORY
Change-Id: I8172ec6ee157e2e48a23b9776e11543c33716dc5
Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
|
|
Introduce common of_flat_dt_match_machine and
of_flat_dt_get_machine_name functions to unify architectures' handling
of machine level model and compatible properties.
Several architectures match the root compatible string with an arch
specific list of machine descriptors duplicating the same search
algorithm. Create a common implementation with a simple architecture
specific hook to iterate over each machine's match table.
Change-Id: I77acb5c560e2b08591c37b57d5d87023aa3fbe91
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
|
|
This patch adds helper functions to configure clock parents and rates
as specified through 'assigned-clock-parents', 'assigned-clock-rates'
DT properties for a clock provider or clock consumer device.
The helpers are now being called by the bus code for the platform, I2C
and SPI busses, before the driver probing and also in the clock core
after registration of a clock provider.
Change-Id: I96d98c9c9d576fcbf0dfc90d1cc75feb9fdf97cb
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
[s.nawrocki@samsung.com: backported to v3.10]
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
|
|
WORKAROUND: Temporary workaround for bluetooth enable.
For specific hci events, operations are needed. So this patch adds
event notification and its notifier registration.
Change-Id: I6f8fe0b3b90c12d7f4fe35823d25b9fbdcd98d06
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
|
|
WORKAROUND: Temporary workaround for bluetooth enable.
The wake pin is used for waking up the hw and host wake pin is used
for waking up host processor during sleep.
Additionally, This patch add reset-gpio property and devm_gpio_request_one
function.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
[This patch rebased by Beomho Seo]
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Change-Id: Ibb2f74cae6e1d11ae84172d0f49a10563fc57e7f
|
|
Signed-off-by: Inha Song <ideal.song@samsung.com>
|
|
This patch codeclean and add callback function.
- Add open/close callback function.
- Remove code about unused configuration, function and enum.
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
|
|
Add support for MAX77836 chipset and its additional two LDO regulators.
These LDO regulators are controlled by the PMIC block with additional
regmap (different I2C slave address).
The MAX77836 charger and safeout regulators are almost identical to
MAX14577. The registers layout is the same, except values for charger's
current. The patch adds simple mapping between device type and supported
current by the charger regulator.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Some system might want to notice changing of battery soc, so this patch
makes charger-manager to trigger uevent whenver battery soc changes.
It is configurable operation via setting flag, 'cm-poll-batt-soc', in dt.
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
|
|
This patch add sensorhub driver to communicate MCU called sensorhub. It
require firmware driver for MCU.
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
|
|
This code is based on linux-3.4-exynos. I've only run a simple copy test from
host to target.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
|
|
This patch add melfas mms128 touchscreen controller driver.
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
|
|
This patch add PM_QOS_CPU_FREQUENCY to quarantee required CPU frequency.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
frequency
This patch add PM_QOS_BUS_FREQUENCY pm_qos to guarantee required memory bus
frequency.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
This patch add max14577/max77836 core/irq driver to support MUIC(Micro USB IC) device
and fuelgague device and support irq domain method to control internal interrupt
of max14577/max77836 device.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
|
|
Add support for S2MPS14 PMIC device to the MFD sec-core driver.
The S2MPS14 is similar to S2MPS11 but it has fewer regulators, two
clocks instead of three and a little different registers layout.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
This patch add new the clock drvier of Exynos3250 SoC based on Cortex-A7
using common clock framework. The CMU (Clock Management Unit) of Exynos3250
control PLLs(Phase Locked Loops) and generate system clocks for CPU, buses,
and function clocks for individual IPs.
The CMU of Exynos3250 includes following clock doamins:
- CPU block for Cortex-A7 MPCore processor
- LEFTBUS/RIGHTBUS block
- TOP block for G3D/MFC/LCD0/ISP/CAM/FSYS/MFC/PERIL/PERIR
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Hyunhee Kim <hyunhee.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Karol Wrona <k.wrona@samsung.com>
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
|
|
To support MIPI command mode based I80 interface panel,
FIMD should do followings:
- Sets LCD I80 interface timings configuration.
- Uses "lcd_sys" as an IRQ resource and sets relevant IRQ configuration.
- Sets LCD block configuration for I80 interface.
- Sets ideal(pixel) clock is 2 times faster than the original one to
generate frame done IRQ prior to the next TE signal.
- Implements trigger feature that transfers image data if there is page
flip request, and implements TE handler to call trigger function.
Change-Id: I3a620a40e4d9c03a2d41b61ffb6cc7c43e782d1f
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
To support LCD I80 interface, the panel should generates
Tearing Effect synchronization signal between MCU and FB
to display video images.
And the display controller should trigger to transfer
video image at this signal.
So the panel receives the TE IRQ, then calls this handler
chains to notify it to the display controller.
Change-Id: Ie60112b9b135bb8a1b05a01fedcd62bd65fc59cd
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
It would be useful e.g. in a server or desktop environment to have
a facility in the notion of fine-grained "per application" or "per
application group" firewall policies. Probably, users in the mobile,
embedded area (e.g. Android based) with different security policy
requirements for application groups could have great benefit from
that as well. For example, with a little bit of configuration effort,
an admin could whitelist well-known applications, and thus block
otherwise unwanted "hard-to-track" applications like [1] from a
user's machine. Blocking is just one example, but it is not limited
to that, meaning we can have much different scenarios/policies that
netfilter allows us than just blocking, e.g. fine grained settings
where applications are allowed to connect/send traffic to, application
traffic marking/conntracking, application-specific packet mangling,
and so on.
Implementation of PID-based matching would not be appropriate
as they frequently change, and child tracking would make that
even more complex and ugly. Cgroups would be a perfect candidate
for accomplishing that as they associate a set of tasks with a
set of parameters for one or more subsystems, in our case the
netfilter subsystem, which, of course, can be combined with other
cgroup subsystems into something more complex if needed.
As mentioned, to overcome this constraint, such processes could
be placed into one or multiple cgroups where different fine-grained
rules can be defined depending on the application scenario, while
e.g. everything else that is not part of that could be dropped (or
vice versa), thus making life harder for unwanted processes to
communicate to the outside world. So, we make use of cgroups here
to track jobs and limit their resources in terms of iptables
policies; in other words, limiting, tracking, etc what they are
allowed to communicate.
In our case we're working on outgoing traffic based on which local
socket that originated from. Also, one doesn't even need to have
an a-prio knowledge of the application internals regarding their
particular use of ports or protocols. Matching is *extremly*
lightweight as we just test for the sk_classid marker of sockets,
originating from net_cls. net_cls and netfilter do not contradict
each other; in fact, each construct can live as standalone or they
can be used in combination with each other, which is perfectly fine,
plus it serves Tejun's requirement to not introduce a new cgroups
subsystem. Through this, we result in a very minimal and efficient
module, and don't add anything except netfilter code.
One possible, minimal usage example (many other iptables options
can be applied obviously):
1) Configuring cgroups if not already done, e.g.:
mkdir /sys/fs/cgroup/net_cls
mount -t cgroup -o net_cls net_cls /sys/fs/cgroup/net_cls
mkdir /sys/fs/cgroup/net_cls/0
echo 1 > /sys/fs/cgroup/net_cls/0/net_cls.classid
(resp. a real flow handle id for tc)
2) Configuring netfilter (iptables-nftables), e.g.:
iptables -A OUTPUT -m cgroup ! --cgroup 1 -j DROP
3) Running applications, e.g.:
ping 208.67.222.222 <pid:1799>
echo 1799 > /sys/fs/cgroup/net_cls/0/tasks
64 bytes from 208.67.222.222: icmp_seq=44 ttl=49 time=11.9 ms
[...]
ping 208.67.220.220 <pid:1804>
ping: sendmsg: Operation not permitted
[...]
echo 1804 > /sys/fs/cgroup/net_cls/0/tasks
64 bytes from 208.67.220.220: icmp_seq=89 ttl=56 time=19.0 ms
[...]
Of course, real-world deployments would make use of cgroups user
space toolsuite, or own custom policy daemons dynamically moving
applications from/to various cgroups.
[1] http://www.blackhat.com/presentations/bh-europe-06/bh-eu-06-biondi/bh-eu-06-biondi-up.pdf
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: cgroups@vger.kernel.org
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[backport from upstream commit 82a37132f300ea53bdcd812917af5a6329ec80c3]
Signed-off-by: Przemyslaw Kedzierski <p.kedzierski@samsung.com>
Change-Id: Iac82ecef5b31a50f52ad9329bdd0403c667f154d
|
|
Even though usb_functionfs_descs_head structure is now deprecated,
it has been used by some user space tools. Its removel in commit
[ac8dde1: “Add flags to descriptors block”] was an oversight
leading to build breakage for such tools.
Bring it back so that old user space tools can still be build
without problems on newer kernel versions.
Reported-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Reported-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Cc: <stable@vger.kernel.org> # 3.14
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Commit taken from linux-usb mailing list. Not merged yet but
required to fix build of FFS apps.
Change-Id: I90fc3786f043aca9463e255ad9900c2d341fd17b
Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
|
|
This reworks the way SuperSpeed descriptors are added and instead of
having a magic after full and high speed descriptors, it reworks the
whole descriptors block to include a flags field which lists which
descriptors are present and makes future extensions possible.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
[backport from upstream commit 410b1f0e1c86443c57dc70d78db7aec193c79787]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-id: I410b1f0e1c86443c57dc70d78db7aec193c79787
|
|
Allow userspace to pass SuperSpeed descriptors and
handle them in the driver accordingly.
This change doesn't modify existing desc_header and thereby
keeps the ABI changes backward compatible i.e. existing
userspace drivers compiled with old header (functionfs.h)
would continue to work with the updated kernel.
Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
[backport from upstream commit 8d4e897bd0150fab594a871484e554472ee01452]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-id: I8d4e897bd0150fab594a871484e554472ee01452
|
|
The file is using u8 which is defined in linux/types.h.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
|
Validate the pad field in the core code whenever specified.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
|
#define's
Wrapping the #define's at a 80 columns boundary just obfuscates the
code. Don't do that.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
|
The dv_timings_cap and enum_dv_timings subdev operations are implemented
at the device level, but apply to pads. Create new variants of those
operations at the pad level. The device level variants will be removed
once all drivers are ported to the pad level DT timings operations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
|
The g_std and s_std operations are video-related, move them to the video
ops where they belong.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Conflicts:
include/media/v4l2-subdev.h
|
|
This event indicates that the video device has encountered
a source parameter change during runtime. This can typically be a
resolution change detected by a video decoder OR a format change
detected by an input connector.
This needs to be nofified to the userspace and the application may
be expected to reallocate buffers before proceeding. The application
can subscribe to events on a specific pad or input port which
it is interested in.
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
|
The vb2 core ignores any return code from the stop_streaming op.
And there really isn't anything it can do anyway in case of an error.
So change the return type to void and update any drivers that implement it.
The int return gave drivers the idea that this operation could actually
fail, but that's really not the case.
The pwc amd sdr-msi3101 drivers both had this construction:
if (mutex_lock_interruptible(&s->v4l2_lock))
return -ERESTARTSYS;
This has been updated to just call mutex_lock(). The stop_streaming op
expects this to really stop streaming and I very much doubt this will
work reliably if stop_streaming just returns without really stopping the
DMA.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Pawel Osciak <pawel@osciak.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Conflicts:
Documentation/video4linux/v4l2-pci-skeleton.c
drivers/staging/media/msi3101/sdr-msi3101.c
|
|
With the new vb2_thread_start/stop core code it is very easy to implement
videobuf2-dvb. This should simplify converting existing videobuf drivers to
vb2.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
|
In order to implement vb2 DVB support you need to be able to start
a kernel thread that queues and dequeues buffers, calling a callback
function for every buffer. This patch adds support for that.
It's based on drivers/media/v4l2-core/videobuf-dvb.c, but with all the DVB
specific stuff stripped out, thus making it much more generic.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
|
Added a vb2_fileio_is_active inline function that returns true if fileio
is in progress. Check for this too in mmap() (you don't want apps mmap()ing
buffers used by fileio) and expbuf() (same reason).
In addition drivers should be able to check for this in queue_setup() to
return an error if an attempt is made to read() or write() with
V4L2_FIELD_ALTERNATE being configured. This is illegal (there is no way
to pass the TOP/BOTTOM information around using file I/O).
However, in order to be able to check for this the init_fileio function
needs to set q->fileio early on, before the buffers are allocated. So switch
to using internal functions (__reqbufs, vb2_internal_qbuf and
vb2_internal_streamon) to skip the fileio check. Well, that's why the internal
functions were created...
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Pawel Osciak <pawel@osciak.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|