summaryrefslogtreecommitdiff
path: root/include/asm-ia64/pal.h
AgeCommit message (Collapse)AuthorFilesLines
2008-08-01[IA64] Move include/asm-ia64 to arch/ia64/include/asmTony Luck1-1827/+0
After moving the the include files there were a few clean-ups: 1) Some files used #include <asm-ia64/xyz.h>, changed to <asm/xyz.h> 2) Some comments alerted maintainers to look at various header files to make matching updates if certain code were to be changed. Updated these comments to use the new include paths. 3) Some header files mentioned their own names in initial comments. Just deleted these self references. Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-04-09[IA64] Itanium Spec updatesRuss Anderson1-9/+63
Updates based on the "Intel® Itanium® Architecture Software Developer's Manual Specification Update October 2007". http://download.intel.com/design/itanium/specupdt/24869911.pdf Signed-off-by: Russ Anderson <rja@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-11-09[IA64] Update printing of feature set bitsRuss Anderson1-2/+3
Newer Itanium versions have added additional processor feature set bits. This patch prints all the implemented feature set bits. Some bit descriptions have not been made public. For those bits, a generic "Feature set X bit Y" message is printed. Bits that are not implemented will no longer be printed. Signed-off-by: Russ Anderson <rja@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-04-30Pull error-inject into release branchTony Luck1-0/+33
2007-03-08[IA64] Proper handling of TLB errors from duplicate itr.d dropinsRuss Anderson1-0/+1
Jack Steiner noticed that duplicate TLB DTC entries do not cause a linux panic. See discussion: http://www.gelato.unsw.edu.au/archives/linux-ia64/0307/6108.html The current TLB recovery code is recovering from the duplicate itr.d dropins, masking the underlying problem. This change modifies the MCA recovery code to look for the TLB check signature of the duplicate TLB entry and panic in that case. Signed-off-by: Russ Anderson (rja@sgi.com) Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-02-17Fix typos concerning hierarchyUwe Kleine-König1-7/+7
heirarchical, hierachical -> hierarchical heirarchy, hierachy -> hierarchy Signed-off-by: Uwe Kleine-König <zeisberg@informatik.uni-freiburg.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-01-29[IA64] Itanium MC Error Injection Tool: pal_mc_error_inject() interfaceFenghua Yu1-0/+33
This patch implements pal_mc_error_inject() interface in kernel. Both physical mode and virtual mode are supported. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-07[PATCH] Add support for type argument in PAL_GET_PSTATEVenkatesh Pallipadi1-2/+7
PAL_GET_PSTATE accepts a type argument to return different kinds of frequency information. Refer: Intel Itanium®Architecture Software Developer's Manual - Volume 2: System Architecture, Revision 2.2 (http://developer.intel.com/design/itanium/manuals/245318.htm) Add the support for type argument and use Instantaneous frequency in the acpi driver. Also fix a bug, where in return value of PAL_GET_PSTATE was getting compared with 'control' bits instead of 'status' bits. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-07[IA64] More Itanium PAL spec updatesRuss Anderson1-2/+41
Additional updates to conform with Rev 2.2 of Volume 2 of "Intel Itanium Architecture Software Developer's Manual" (January 2006). Add pal_bus_features_s bits 52 & 53 (page 2:347) Add pal_vm_info_2_s field max_purges (page 2:2:451) Add PAL_GET_HW_POLICY call (page 2:381) Add PAL_SET_HW_POLICY call (page 2:439) Sample output before: --------------------------------------------------------------------- cobra:~ # cat /proc/pal/cpu0/vm_info Physical Address Space : 50 bits Virtual Address Space : 61 bits Protection Key Registers(PKR) : 16 Implemented bits in PKR.key : 24 Hash Tag ID : 0x2 Size of RR.rid : 24 Supported memory attributes : WB, UC, UCE, WC, NaTPage --------------------------------------------------------------------- Sample output after: --------------------------------------------------------------------- cobra:~ # cat /proc/pal/cpu0/vm_info Physical Address Space : 50 bits Virtual Address Space : 61 bits Protection Key Registers(PKR) : 16 Implemented bits in PKR.key : 24 Hash Tag ID : 0x2 Max Purges : 1 Size of RR.rid : 24 Supported memory attributes : WB, UC, UCE, WC, NaTPage --------------------------------------------------------------------- Signed-off-by: Russ Anderson (rja@sgi.com) Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-07[IA64] Add se bit to Processor State Parameter structureRuss Anderson1-1/+3
Rev 2.2 of Volume 2 of "Intel Itanium Architecture Software Developer's Manual" (January 2006) adds a se bit to the Processor State Parameter fields (pages 2:299). This patch gets the structs back in sync with the spec. Signed-off-by: Russ Anderson (rja@sgi.com) Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-12-07[IA64] Add dp bit to cache and bus check structsRuss Anderson1-3/+5
Rev 2.2 of Volume 2 of "Intel Itanium Architecture Software Developer's Manual" (January 2006) adds a dp bit to the cache_check and bus_check fields (pages 2:401-2:404). This patch gets the structs back in sync with the spec. Signed-off-by: Russ Anderson (rja@sgi.com) Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-10-17[IA64] remove unused PAL_CALL_IC_OFFBjorn Helgaas1-9/+2
Linux maps PAL instructions with an ITR, but uses a DTC for PAL data. Section 11.10.2.1.3, "Making PAL Procedures Calls in Physical or Virtual Mode," of the SDM (rev 2.2), says we must therefore make all PAL calls with PSR.ic = 1 so that Linux can handle any TLB faults. PAL_CALL_IC_OFF is currently unused, and as long as we use the ITR + DTC strategy, we can't use it. So remove it. I also removed the code in ia64_pal_call_static() that conditionally cleared PSR.ic. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-09-26[IA64] PAL calls need physical mode, stackedRuss Anderson1-2/+4
PAL_CACHE_READ and PAL_CACHE_WRITE need to be called in physical mode with stacked registers. Signed-off-by: Russ Anderson (rja@sgi.com) Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-09-26Pull model-name into release branchTony Luck1-0/+10
2006-07-31[IA64] Format /proc/pal/*/version_info correctlyMatthew Wilcox1-1/+6
/proc/pal/*/version_info is a bit confusing. HP firmware, at least, reports 07.31 instead of 0.7.31. Also, the comment is out of place; it's an internal detail about the implementation of ia64_pal_version. Since the 2.2 revision of the SDM still states that PAL_VERSION can be called in virtual mode, correct the comment to be more accurate. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-06-05[IA64] Add "model name" to /proc/cpuinfoTony Luck1-0/+10
Linux ia64 port tried to decode the processor family number to something human-readable, but Intel brandnames don't change synchronously with updates to the family number. Adopt a more i386-like approach and just print the family number in decimal. Add a new field "model name" that uses PAL_BRAND_INFO to find the official name for the cpu, or on older systems, falls back to using the well-known codenames (Merced, McKinley, Madison). Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-03-31[IA64] Avoid "u64 foo : 32;" for gcc3 vs. gcc4 compatibilityTony Luck1-3/+3
gcc3 thinks that a 32-bit field of a u64 type is itself a u64, so should be printed with "%ld". gcc4 thinks it needs just "%d". Make both versions happy by avoiding this construct. Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-03-30[IA64] Export cpu cache info by sysfsZhang, Yanmin1-0/+28
The patch exports 8 attributes of cpu cache info under /sys/devices/system/cpu/cpuX/cache/indexX: 1) level 2) type 3) coherency_line_size 4) ways_of_associativity 5) size 6) shared_cpu_map 7) attributes 8) number_of_sets: number_of_sets=size/ways_of_associativity/coherency_line_size. Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-03-24[IA64] New IA64 core/thread detection patchFenghua Yu1-2/+1
IPF SDM 2.2 changes definition of PAL_LOGICAL_TO_PHYSICAL to add proc_number=-1 to get core/thread mapping info on the running processer. Based on this change, we had better to update existing core/thread detection in IA64 kernel correspondingly. The attached patch implements this change. It simplifies detection code and eliminates potential race condition. It also runs a bit faster and has better scalability especially when cores and threads number grows up in one package. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-01-16[IA64] pal cache flush patchXu, Anthony1-1/+1
Because PAL spec has changed since 2002, you can goto http://developer.intel.com/design/itanium/manuals/iiasdmanual.htm to download new SDM, all PAL calls should be invoked with psr.ic=1, and it's caller's responsibility to handle possible tlb miss. Ia64_pal_cache_flush was written according to old spec, it is obsolete, and this patch has ia64_pal_cache_flush conform to new spec. Signed-off-by Anthony Xu <anthony.xu@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-08-26[IA64] Add ACPI based P-state supportVenkatesh Pallipadi1-0/+21
Patch to support P-state transitions on ia64. This driver is based on ACPI, and uses the ACPI processor driver interface to find out the P-state support information for the processor. This driver plugs into generic cpufreq infrastructure. Once this driver is loaded successfully, ondemand/userspace governor can be used to change the CPU frequency dynamically based on load or on request from userspace process. Refer : ACPI specification - http://www.acpi.info P-state related PAL calls - http://developer.intel.com/design/itanium/downloads/24869909.pdf Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-25[IA64] multi-core/multi-thread identificationSuresh Siddha1-0/+68
Version 3 - rediffed to apply on top of Ashok's hotplug cpu patch. /proc/cpuinfo output in step with x86. This is an updated MC/MT identification patch based on the previous discussions on list. Add the Multi-core and Multi-threading detection for IPF. - Add new core and threading related fields in /proc/cpuinfo. Physical id Core id Thread id Siblings - setup the cpu_core_map and cpu_sibling_map appropriately - Handles Hot plug CPU Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Gordon Jin <gordon.jin@intel.com> Signed-off-by: Rohit Seth <rohit.seth@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds1-0/+1564
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 23:47:56 +0000