summaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)AuthorFilesLines
2012-07-22xfs: fix comment typo of struct xfs_da_blkinfo.Chen Baozi1-1/+1
Fix trivial typo error that has written "It" to "Is". Signed-off-by: Chen Baozi <baozich@gmail.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-13xfs: do not call xfs_bdstrat_cb in xfs_buf_iodone_callbacksChristoph Hellwig3-31/+23
xfs_bdstrat_cb only adds a check for a shutdown filesystem over xfs_buf_iorequest, but xfs_buf_iodone_callbacks just checked for a shut down filesystem a little earlier. In addition the shutdown handling in xfs_bdstrat_cb is not very suitable for this caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-13xfs: prevent recursion in xfs_buf_iorequestChristoph Hellwig1-1/+1
If the b_iodone handler is run in calling context in xfs_buf_iorequest we can run into a recursion where xfs_buf_iodone_callbacks keeps calling back into xfs_buf_iorequest because an I/O error happened, which keeps calling back into xfs_buf_iorequest. This chain will usually not take long because the filesystem gets shut down because of log I/O errors, but even over a short time it can cause stack overflows if run on the same context. As a short term workaround make sure we always call the iodone handler in workqueue context. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-13xfs: don't defer metadata allocation to the workqueueDave Chinner1-3/+12
Almost all metadata allocations come from shallow stack usage situations. Avoid the overhead of switching the allocation to a workqueue as we are not in danger of running out of stack when making these allocations. Metadata allocations are already marked through the args that are passed down, so this is trivial to do. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reported-by: Mel Gorman <mgorman@suse.de> Tested-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-13xfs: really fix the cursor leak in xfs_alloc_ag_vextent_nearDave Chinner1-2/+2
The current cursor is reallocated when retrying the allocation, so the existing cursor needs to be destroyed in both the restart and the failure cases. Signed-off-by: Dave Chinner <dchinner@redhat.com> Tested-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-01xfs: factor buffer reading from xfs_dir2_leaf_getdentsDave Chinner1-202/+232
The buffer reading code in xfs_dir2_leaf_getdents is complex and difficult to follow due to the readahead and all the context is carries. it is also badly indented and so difficult to read. Factor it out into a separate function to make it easier to understand and optimise in future patches. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-01xfs: remove struct xfs_dabuf and infrastructureDave Chinner13-779/+602
The struct xfs_dabuf now only tracks a single xfs_buf and all the information it holds can be gained directly from the xfs_buf. Hence we can remove the struct dabuf and pass the xfs_buf around everywhere. Kill the struct dabuf and the associated infrastructure. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-01xfs: use discontiguous xfs_buf support in dabuf wrappersDave Chinner2-305/+239
First step in converting the directory code to use native discontiguous buffers and replacing the dabuf construct. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-01xfs: support discontiguous buffers in the xfs_buf_log_itemDave Chinner2-93/+244
discontigous buffer in separate buffer format structures. This means log recovery will recover all the changes on a per segment basis without requiring any knowledge of the fact that it was logged from a compound buffer. To do this, we need to be able to determine what buffer segment any given offset into the compound buffer sits over. This enables us to translate the dirty bitmap in the number of separate buffer format structures required. We also need to be able to determine the number of bitmap elements that a given buffer segment has, as this determines the size of the buffer format structure. Hence we need to be able to determine the both the start offset into the buffer and the length of a given segment to be able to calculate this. With this information, we can preallocate, build and format the correct log vector array for each segment in a compound buffer to appear exactly the same as individually logged buffers in the log. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-01xfs: add discontiguous buffer support to transactionsDave Chinner2-39/+79
Now that the buffer cache supports discontiguous buffers, add support to the transaction buffer interface for getting and reading buffers. Note that this patch does not convert the buffer item logging to support discontiguous buffers. That will be done as a separate commit. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-01xfs: add discontiguous buffer map interfaceDave Chinner2-25/+58
With the internal interfaces supporting discontiguous buffer maps, add external lookup, read and get interfaces so they can start to be used. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-01xfs: convert internal buffer functions to pass mapsDave Chinner2-54/+191
While the external interface currently uses separate blockno/length variables, we need to move internal interfaces to passing and parsing vector maps. This will then allow us to add external interfaces to support discontiguous buffer maps as the internal code will already support them. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-01xfs: separate buffer indexing from block mapDave Chinner2-13/+35
To support discontiguous buffers in the buffer cache, we need to separate the cache index variables from the I/O map. While this is currently a 1:1 mapping, discontiguous buffer support will break this relationship. However, for caching purposes, we can still treat them the same as a contiguous buffer - the block number of the first block and the length of the buffer - as that is still a unique representation. Also, the only way we will ever access the discontiguous regions of buffers is via bulding the complete buffer in the first place, so using the initial block number and entire buffer length is a sane way to index the buffers. Add a block mapping vector construct to the xfs_buf and use it in the places where we are doing IO instead of the current b_bn/b_length variables. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-07-01xfs: struct xfs_buf_log_format isn't variable sized.Dave Chinner5-43/+40
The struct xfs_buf_log_format wants to think the dirty bitmap is variable sized. In fact, it is variable size on disk simply due to the way we map it from the in-memory structure, but we still just use a fixed size memory allocation for the in-memory structure. Hence it makes no sense to set the function up as a variable sized structure when we already know it's maximum size, and we always allocate it as such. Simplify the structure by making the dirty bitmap a fixed sized array and just using the size of the structure for the allocation size. This will make it much simpler to allocate and manipulate an array of format structures for discontiguous buffer support. The previous struct xfs_buf_log_item size according to /proc/slabinfo was 224 bytes. pahole doesn't give the same size because of the variable size definition. With this modification, pahole reports the same as /proc/slabinfo: /* size: 224, cachelines: 4, members: 6 */ Because the xfs_buf_log_item size is now determined by the maximum supported block size we introduce a dependency on xfs_alloc_btree.h. Avoid this dependency by moving the idefines for the maximum block sizes supported to xfs_types.h with all the other max/min type defines to avoid any new dependencies. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-21xfs: remove xlog_t typedefMark Tinguely3-157/+224
Remove the xlog_t type definitions. Signed-off-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-21xfs: rename log structure to xlogMark Tinguely6-88/+116
Rename the XFS log structure to xlog to help crash distinquish it from the other logs in Linux. Signed-off-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-21xfs: shutdown xfs_sync_worker before the logBen Myers2-16/+17
Revert commit 1307bbd, which uses the s_umount semaphore to provide exclusion between xfs_sync_worker and unmount, in favor of shutting down the sync worker before freeing the log in xfs_log_unmount. This is a cleaner way of resolving the race between xfs_sync_worker and unmount than using s_umount. Signed-off-by: Ben Myers <bpm@sgi.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2012-06-21xfs: Fix overallocation in xfs_buf_allocate_memory()Jan Kara1-14/+2
Commit de1cbee which removed b_file_offset in favor of b_bn introduced a bug causing xfs_buf_allocate_memory() to overestimate the number of necessary pages. The problem is that xfs_buf_alloc() sets b_bn to -1 and thus effectively every buffer is straddling a page boundary which causes xfs_buf_allocate_memory() to allocate two pages and use vmalloc() for access which is unnecessary. Dave says xfs_buf_alloc() doesn't need to set b_bn to -1 anymore since the buffer is inserted into the cache only after being fully initialized now. So just make xfs_buf_alloc() fill in proper block number from the beginning. CC: David Chinner <dchinner@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-21xfs: fix allocbt cursor leak in xfs_alloc_ag_vextent_nearDave Chinner1-0/+1
When we fail to find an matching extent near the requested extent specification during a left-right distance search in xfs_alloc_ag_vextent_near, we fail to free the original cursor that we used to look up the XFS_BTNUM_CNT tree and hence leak it. Reported-by: Chris J Arges <chris.j.arges@canonical.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-21xfs: check for stale inode before acquiring iflock on pushBrian Foster1-9/+8
An inode in the AIL can be flush locked and marked stale if a cluster free transaction occurs at the right time. The inode item is then marked as flushing, which causes xfsaild to spin and leaves the filesystem stalled. This is reproduced by running xfstests 273 in a loop for an extended period of time. Check for stale inodes before the flush lock. This marks the inode as pinned, leads to a log flush and allows the filesystem to proceed. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-14xfs: fix typo in comment of xfs_dinode_t.Chen Baozi1-1/+1
There should be "XFS_DFORK_DPTR, XFS_DFORK_APTR, and XFS_DFORK_PTR" instead of "XFS_DFORK_PTR, XFS_DFORK_DPTR, and XFS_DFORK_PTR". Signed-off-by: Chen Baozi <baozich@gmail.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-14xfs: kill copy and paste segment checks in xfs_file_aio_readDave Chinner1-14/+3
The generic segment check code now returns a count of the number of bytes in the iovec, so we don't need to roll our own anymore. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-14xfs: make largest supported offset less shoutyDave Chinner7-12/+10
XFS_MAXIOFFSET() is just a simple macro that resolves to mp->m_maxioffset. It doesn't need to exist, and it just makes the code unnecessarily loud and shouty. Make it quiet and easy to read. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-14xfs: m_maxioffset is redundantDave Chinner4-12/+9
The m_maxioffset field in the struct xfs_mount contains the same value as the superblock s_maxbytes field. There is no need to carry two copies of this limit around, so use the VFS superblock version. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-14xfs: fix debug_object WARN at xfs_alloc_vextent()Jeff Liu1-1/+1
Fengguang reports: [ 780.529603] XFS (vdd): Ending clean mount [ 781.454590] ODEBUG: object is on stack, but not annotated [ 781.455433] ------------[ cut here ]------------ [ 781.455433] WARNING: at /c/kernel-tests/sound/lib/debugobjects.c:301 __debug_object_init+0x173/0x1f1() [ 781.455433] Hardware name: Bochs [ 781.455433] Modules linked in: [ 781.455433] Pid: 26910, comm: kworker/0:2 Not tainted 3.4.0+ #51 [ 781.455433] Call Trace: [ 781.455433] [<ffffffff8106bc84>] warn_slowpath_common+0x83/0x9b [ 781.455433] [<ffffffff8106bcb6>] warn_slowpath_null+0x1a/0x1c [ 781.455433] [<ffffffff814919a5>] __debug_object_init+0x173/0x1f1 [ 781.455433] [<ffffffff81491c65>] debug_object_init+0x14/0x16 [ 781.455433] [<ffffffff8108842a>] __init_work+0x20/0x22 [ 781.455433] [<ffffffff8134ea56>] xfs_alloc_vextent+0x6c/0xd5 Use INIT_WORK_ONSTACK in xfs_alloc_vextent instead of INIT_WORK. Reported-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Jie Liu <jeff.liu@oracle.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-14xfs: xfs_vm_writepage clear iomap_valid when !buffer_uptodate (REV2)Alain Renaud1-3/+8
On filesytems with a block size smaller than PAGE_SIZE we currently have a problem with unwritten extents. If a we have multi-block page for which an unwritten extent has been allocated, and only some of the buffers have been written to, and they are not contiguous, we can expose stale data from disk in the blocks between the writes after extent conversion. Example of a page with unwritten and real data. buffer content 0 empty b_state = 0 1 DATA b_state = 0x1023 Uptodate,Dirty,Mapped,Unwritten 2 DATA b_state = 0x1023 Uptodate,Dirty,Mapped,Unwritten 3 empty b_state = 0 4 empty b_state = 0 5 DATA b_state = 0x1023 Uptodate,Dirty,Mapped,Unwritten 6 DATA b_state = 0x1023 Uptodate,Dirty,Mapped,Unwritten 7 empty b_state = 0 Buffers 1, 2, 5, and 6 have been written to, leaving 0, 3, 4, and 7 empty. Currently buffers 1, 2, 5, and 6 are added to a single ioend, and when IO has completed, extent conversion creates a real extent from block 1 through block 6, leaving 0 and 7 unwritten. However buffers 3 and 4 were not written to disk, so stale data is exposed from those blocks on a subsequent read. Fix this by setting iomap_valid = 0 when we find a buffer that is not Uptodate. This ensures that buffers 5 and 6 are not added to the same ioend as buffers 1 and 2. Later these blocks will be converted into two separate real extents, leaving the blocks in between unwritten. Signed-off-by: Alain Renaud <arenaud@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-06-01Merge branch 'akpm' (Fixups for Andrew's patchbomb)Linus Torvalds13-45/+33
Merge fixups for the mac NLS tables from Andrew. * emailed from Andrew Morton, and one cleanup by me: nls: fix (and rename) mac NLS table files and config options fs/nls/Makefile: remove bogus CONFIG_ assignments
2012-06-01nls: fix (and rename) mac NLS table files and config optionsLinus Torvalds13-33/+33
The config options in the Kconfig file (with _CODEPAGE_ in the name) didn't match the config option name in the Makefile (no _CODEPAGE_). And both of them were of the hard-to-read MACXYZZY variety, which made them hard to parse for normal humans: MACROMAN easily reads as "macro man", not as "Mac Roman". So rename the options to be consistent, and be NLS_MAC_xyzzy. Rename the files to be mac-xyzzy.c too, and drop the "nls" part entirely (it's already in the directory name). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-01fs/nls/Makefile: remove bogus CONFIG_ assignmentsAndrew Morton1-12/+0
These were debug things which snuck through. Reported-by: Yinghai Lu <yinghai@kernel.org> Cc: Vladimir Serbinenko <phcoder@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-01Merge tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtdLinus Torvalds6-13/+97
Pull mtd update from David Woodhouse: - More robust parsing especially of xattr data in JFFS2 - Updates to mxc_nand and gpmi drivers to support new boards and device tree - Improve consistency of information about ECC strength in NAND devices - Clean up partition handling of plat_nand - Support NAND drivers without dedicated access to OOB area - BCH hardware ECC support for OMAP - Other fixes and cleanups, and a few new device IDs Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to added include files next to each other. * tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd: (75 commits) mtd: mxc_nand: move ecc strengh setup before nand_scan_tail mtd: block2mtd: fix recursive call of mtd_writev mtd: gpmi-nand: define ecc.strength mtd: of_parts: fix breakage in Kconfig mtd: nand: fix scan_read_raw_oob mtd: docg3 fix in-middle of blocks reads mtd: cfi_cmdset_0002: Slight cleanup of fixup messages mtd: add fixup for S29NS512P NOR flash. jffs2: allow to complete xattr integrity check on first GC scan jffs2: allow to discriminate between recoverable and non-recoverable errors mtd: nand: omap: add support for hardware BCH ecc ARM: OMAP3: gpmc: add BCH ecc api and modes mtd: nand: check the return code of 'read_oob/read_oob_raw' mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw' mtd: m25p80: Add support for Winbond W25Q80BW jffs2: get rid of jffs2_sync_super jffs2: remove unnecessary GC pass on sync jffs2: remove unnecessary GC pass on umount jffs2: remove lock_super mtd: gpmi: add gpmi support for mx6q ...
2012-06-01Merge branch 'for-linus' of ↵Linus Torvalds3-12/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull third pile of signal handling patches from Al Viro: "This time it's mostly helpers and conversions to them; there's a lot of stuff remaining in the tree, but that'll either go in -rc2 (isolated bug fixes, ideally via arch maintainers' trees) or will sit there until the next cycle." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: x86: get rid of calling do_notify_resume() when returning to kernel mode blackfin: check __get_user() return value whack-a-mole with TIF_FREEZE FRV: Optimise the system call exit path in entry.S [ver #2] FRV: Shrink TIF_WORK_MASK [ver #2] FRV: Prevent syscall exit tracing and notify_resume at end of kernel exceptions new helper: signal_delivered() powerpc: get rid of restore_sigmask() most of set_current_blocked() callers want SIGKILL/SIGSTOP removed from set set_restore_sigmask() is never called without SIGPENDING (and never should be) TIF_RESTORE_SIGMASK can be set only when TIF_SIGPENDING is set don't call try_to_freeze() from do_signal() pull clearing RESTORE_SIGMASK into block_sigmask() sh64: failure to build sigframe != signal without handler openrisc: tracehook_signal_handler() is supposed to be called on success new helper: sigmask_to_save() new helper: restore_saved_sigmask() new helpers: {clear,test,test_and_clear}_restore_sigmask() HAVE_RESTORE_SIGMASK is defined on all architectures now
2012-06-01Merge branch 'for-linus' of ↵Linus Torvalds89-1081/+1175
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs changes from Al Viro. "A lot of misc stuff. The obvious groups: * Miklos' atomic_open series; kills the damn abuse of ->d_revalidate() by NFS, which was the major stumbling block for all work in that area. * ripping security_file_mmap() and dealing with deadlocks in the area; sanitizing the neighborhood of vm_mmap()/vm_munmap() in general. * ->encode_fh() switched to saner API; insane fake dentry in mm/cleancache.c gone. * assorted annotations in fs (endianness, __user) * parts of Artem's ->s_dirty work (jff2 and reiserfs parts) * ->update_time() work from Josef. * other bits and pieces all over the place. Normally it would've been in two or three pull requests, but signal.git stuff had eaten a lot of time during this cycle ;-/" Fix up trivial conflicts in Documentation/filesystems/vfs.txt (the 'truncate_range' inode method was removed by the VM changes, the VFS update adds an 'update_time()' method), and in fs/btrfs/ulist.[ch] (due to sparse fix added twice, with other changes nearby). * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (95 commits) nfs: don't open in ->d_revalidate vfs: retry last component if opening stale dentry vfs: nameidata_to_filp(): don't throw away file on error vfs: nameidata_to_filp(): inline __dentry_open() vfs: do_dentry_open(): don't put filp vfs: split __dentry_open() vfs: do_last() common post lookup vfs: do_last(): add audit_inode before open vfs: do_last(): only return EISDIR for O_CREAT vfs: do_last(): check LOOKUP_DIRECTORY vfs: do_last(): make ENOENT exit RCU safe vfs: make follow_link check RCU safe vfs: do_last(): use inode variable vfs: do_last(): inline walk_component() vfs: do_last(): make exit RCU safe vfs: split do_lookup() Btrfs: move over to use ->update_time fs: introduce inode operation ->update_time reiserfs: get rid of resierfs_sync_super reiserfs: mark the superblock as dirty a bit later ...
2012-06-01Merge tag 'ext4_for_linus' of ↵Linus Torvalds26-194/+1726
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull Ext4 updates from Theodore Ts'o: "The major new feature added in this update is Darrick J Wong's metadata checksum feature, which adds crc32 checksums to ext4's metadata fields. There is also the usual set of cleanups and bug fixes." * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (44 commits) ext4: hole-punch use truncate_pagecache_range jbd2: use kmem_cache_zalloc wrapper instead of flag ext4: remove mb_groups before tearing down the buddy_cache ext4: add ext4_mb_unload_buddy in the error path ext4: don't trash state flags in EXT4_IOC_SETFLAGS ext4: let getattr report the right blocks in delalloc+bigalloc ext4: add missing save_error_info() to ext4_error() ext4: add debugging trigger for ext4_error() ext4: protect group inode free counting with group lock ext4: use consistent ssize_t type in ext4_file_write() ext4: fix format flag in ext4_ext_binsearch_idx() ext4: cleanup in ext4_discard_allocated_blocks() ext4: return ENOMEM when mounts fail due to lack of memory ext4: remove redundundant "(char *) bh->b_data" casts ext4: disallow hard-linked directory in ext4_lookup ext4: fix potential integer overflow in alloc_flex_gd() ext4: remove needs_recovery in ext4_mb_init() ext4: force ro mount if ext4_setup_super() fails ext4: fix potential NULL dereference in ext4_free_inodes_counts() ext4/jbd2: add metadata checksumming to the list of supported features ...
2012-06-01HAVE_RESTORE_SIGMASK is defined on all architectures nowAl Viro3-12/+0
Everyone either defines it in arch thread_info.h or has TIF_RESTORE_SIGMASK and picks default set_restore_sigmask() in linux/thread_info.h. Kill the ifdefs, slap #error in linux/thread_info.h to catch breakage when new ones get merged. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01nfs: don't open in ->d_revalidateMiklos Szeredi2-55/+78
NFSv4 can't do reliable opens in d_revalidate, since it cannot know whether a mount needs to be followed or not. It does check d_mountpoint() on the dentry, which can result in a weird error if the VFS found that the mount does not in fact need to be followed, e.g.: # mount --bind /mnt/nfs /mnt/nfs-clone # echo something > /mnt/nfs/tmp/bar # echo x > /tmp/file # mount --bind /tmp/file /mnt/nfs-clone/tmp/bar # cat /mnt/nfs/tmp/bar cat: /mnt/nfs/tmp/bar: Not a directory Which should, by any sane filesystem, result in "something" being printed. So instead do the open in f_op->open() and in the unlikely case that the cached dentry turned out to be invalid, drop the dentry and return EOPENSTALE to let the VFS retry. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: retry last component if opening stale dentryMiklos Szeredi1-2/+35
NFS optimizes away d_revalidates for last component of open. This means that open itself can find the dentry stale. This patch allows the filesystem to return EOPENSTALE and the VFS will retry the lookup on just the last component if possible. If the lookup was done using RCU mode, including the last component, then this is not possible since the parent dentry is lost. In this case fall back to non-RCU lookup. Currently this is not used since NFS will always leave RCU mode. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: nameidata_to_filp(): don't throw away file on errorMiklos Szeredi1-3/+5
If open fails, don't put the file. This allows it to be reused if open needs to be retried. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: nameidata_to_filp(): inline __dentry_open()Miklos Szeredi1-2/+18
Copy __dentry_open() into nameidata_to_filp(). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_dentry_open(): don't put filpMiklos Szeredi1-1/+2
Move put_filp() out to __dentry_open(), the only caller now. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: split __dentry_open()Miklos Szeredi2-14/+34
Split __dentry_open() into two functions: do_dentry_open() - does most of the actual work, doesn't put file on failure open_check_o_direct() - after a successful open, checks direct_IO method This will allow i_op->atomic_open to do just the file initialization and leave the direct_IO checking to the VFS. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_last() common post lookupMiklos Szeredi1-31/+3
Now the post lookup code can be shared between O_CREAT and plain opens since they are essentially the same. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_last(): add audit_inode before openMiklos Szeredi1-0/+1
This allows this code to be shared between O_CREAT and plain opens. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_last(): only return EISDIR for O_CREATMiklos Szeredi1-1/+1
This allows this code to be shared between O_CREAT and plain opens. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_last(): check LOOKUP_DIRECTORYMiklos Szeredi1-0/+3
Check for ENOTDIR before finishing open. This allows this code to be shared between O_CREAT and plain opens. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_last(): make ENOENT exit RCU safeMiklos Szeredi1-2/+4
This will allow this code to be used in RCU mode. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: make follow_link check RCU safeMiklos Szeredi1-2/+10
This will allow this code to be used in RCU mode. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_last(): use inode variableMiklos Szeredi1-3/+5
Use helper variable instead of path->dentry->d_inode before complete_walk(). This will allow this code to be used in RCU mode. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_last(): inline walk_component()Miklos Szeredi1-5/+30
Copy walk_component() into do_lookup(). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: do_last(): make exit RCU safeMiklos Szeredi1-1/+1
Allow returning from do_last() with LOOKUP_RCU still set on the "out:" and "exit:" labels. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01vfs: split do_lookup()Miklos Szeredi1-14/+45
Split do_lookup() into two functions: lookup_fast() - does cached lookup without i_mutex lookup_slow() - does lookup with i_mutex Both follow managed dentries. The new functions are needed by atomic_open. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 01:57:32 +0000