summaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)AuthorFilesLines
2010-09-23nfs: introduce mount option '-olocal_lock' to make locks localSuresh Jayaraman3-16/+94
NFS clients since 2.6.12 support flock locks by emulating fcntl byte-range locks. Due to this, some windows applications which seem to use both flock (share mode lock mapped as flock by Samba) and fcntl locks sequentially on the same file, can't lock as they falsely assume the file is already locked. The problem was reported on a setup with windows clients accessing excel files on a Samba exported share which is originally a NFS mount from a NetApp filer. Older NFS clients (< 2.6.12) did not see this problem as flock locks were considered local. To support legacy flock behavior, this patch adds a mount option "-olocal_lock=" which can take the following values: 'none' - Neither flock locks nor POSIX locks are local 'flock' - flock locks are local 'posix' - fcntl/POSIX locks are local 'all' - Both flock locks and POSIX locks are local Testing: - This patch was tested by using -olocal_lock option with different values and the NLM calls were noted from the network packet captured. 'none' - NLM calls were seen during both flock() and fcntl(), flock lock was granted, fcntl was denied 'flock' - no NLM calls for flock(), NLM call was seen for fcntl(), granted 'posix' - NLM call was seen for flock() - granted, no NLM call for fcntl() 'all' - no NLM calls were seen during both flock() and fcntl() - No bugs were seen during NFSv4 locking/unlocking in general and NFSv4 reboot recovery. Cc: Neil Brown <neilb@suse.de> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-22lockd: Remove BKL from the clientBryan Schumaker2-14/+14
This patch removes all calls to lock_kernel() from the client. This patch should be applied after the "fs/lock.c prepare for BKL removal" patch submitted by Arnd Bergmann on September 18. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-21SUNRPC: Refactor logic to NUL-terminate strings in pagesChuck Lever3-14/+3
Clean up: Introduce a helper to '\0'-terminate XDR strings that are placed in a page in the page cache. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-21NFS: Fix NFSv3 debugging messages in fs/nfs/nfs3proc.cChuck Lever1-2/+3
Clean up. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-21NFS: Convert nfsiod to use alloc_workqueue()Trond Myklebust1-1/+1
create_singlethread_workqueue() is deprecated. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-21NFSv4.1: Fix the slotid initialisation in nfs_async_rename()Trond Myklebust1-0/+2
This fixes an Oopsable condition that was introduced by commit d3d4152a5d59af9e13a73efa9e9c24383fbe307f (nfs: make sillyrename an async operation) Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-21NFS: Fix a use-after-free case in nfs_async_rename()Trond Myklebust1-7/+2
The call to nfs_async_rename_release() after rpc_run_task() is incorrect. The rpc_run_task() is always guaranteed to call the ->rpc_release() method. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17nfs: make sillyrename an async operationJeff Layton4-11/+261
A synchronous rename can be interrupted by a SIGKILL. If that happens during a sillyrename operation, it's possible for the rename call to be sent to the server, but the task exits before processing the reply. If this happens, the sillyrenamed file won't get cleaned up during nfs_dentry_iput and the server is left with a dangling .nfs* file hanging around. Fix this problem by turning sillyrename into an asynchronous operation and have the task doing the sillyrename just wait on the reply. If the task is killed before the sillyrename completes, it'll still proceed to completion. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17nfs: move nfs_sillyrename to unlink.cJeff Layton2-71/+84
...since that's where most of the sillyrenaming code lives. A comment block is added to the beginning as well to clarify how sillyrenaming works. Also, make nfs_async_unlink static as nfs_sillyrename is the only caller. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17nfs: standardize the rename response containerJeff Layton4-13/+13
Right now, v3 and v4 have their own variants. Create a standard struct that will work for v3 and v4. v2 doesn't get anything but a simple error and so isn't affected by this. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17nfs: standardize the rename args containerJeff Layton6-24/+20
Each NFS version has its own version of the rename args container. Standardize them on a common one that's identical to the one NFSv4 uses. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17NFS: Add an 'open_context' element to struct nfs_rpc_opsTrond Myklebust3-5/+6
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17NFS: Clean up nfs4_proc_create()Trond Myklebust4-50/+57
Remove all remaining references to the struct nameidata from the low level NFS layers. Again pass down a partially initialised struct nfs_open_context when we want to do atomic open+create. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17NFSv4: Further cleanups for nfs4_open_revalidate()Trond Myklebust3-35/+26
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17NFSv4: Clean up nfs4_open_revalidateTrond Myklebust3-19/+17
Remove references to 'struct nameidata' from the low-level open_revalidate code, and replace them with a struct nfs_open_context which will be correctly initialised upon success. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17NFSv4: Further minor cleanups for nfs4_atomic_open()Trond Myklebust3-31/+20
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17NFSv4: Clean up nfs4_atomic_openTrond Myklebust4-36/+91
Start moving the 'struct nameidata' dependent code out of the lower level NFS code in preparation for the removal of open intents. Instead of the struct nameidata, we pass down a partially initialised struct nfs_open_context that will be fully initialised by the atomic open upon success. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17NFS: Allow NFSROOT debugging messages to be enabled dynamicallyChuck Lever1-6/+13
As a convenience, introduce a kernel command line option to enable NFSROOT debugging messages. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17NFS: Clean up nfsroot.cChuck Lever1-418/+1
Clean up: now that mount option parsing for nfsroot is handled in fs/nfs/super.c, remove code in fs/nfs/nfsroot.c that is no longer used. This includes code that constructs the legacy nfs_mount_data structure, and code that does a MNT call to the server. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17NFS: Use super.c for NFSROOT mount option parsingChuck Lever1-6/+176
Replace duplicate code in NFSROOT for mounting an NFS server on '/' with logic that uses the existing mainline text-based logic in the NFS client. Add documenting comments where appropriate. Note that this means NFSROOT mounts now use the same default settings as v2/v3 mounts done via mount(2) from user space. vers=3,tcp,rsize=<negotiated default>,wsize=<negotiated default> As before, however, no version/protocol negotiation with the server is done. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17NFS: Clean up NFSROOT command line parsingChuck Lever1-9/+23
Clean up: To reduce confusion, rename nfs_root_name as nfs_root_parms, as this buffer contains more than just the name of the remote server. Introduce documenting comments around nfs_root_setup(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-09-17NFS: Remove \t from mount debugging messageChuck Lever1-1/+1
During boot, a random character is displayed instead of a tab. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-08-28Merge branch 'for-linus' of git://git.infradead.org/users/eparis/notifyLinus Torvalds3-36/+64
* 'for-linus' of git://git.infradead.org/users/eparis/notify: fsnotify: drop two useless bools in the fnsotify main loop fsnotify: fix list walk order fanotify: Return EPERM when a process is not privileged fanotify: resize pid and reorder structure fanotify: drop duplicate pr_debug statement fanotify: flush outstanding perm requests on group destroy fsnotify: fix ignored mask handling between inode and vfsmount marks fanotify: add MAINTAINERS entry fsnotify: reset used_inode and used_vfsmount on each pass fanotify: do not dereference inode_mark when it is unset
2010-08-28Merge branch 'for-linus' of ↵Linus Torvalds6-12/+30
git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6: eCryptfs: Fix encrypted file name lookup regression ecryptfs: properly mark init functions fs/ecryptfs: Return -ENOMEM on memory allocation failure
2010-08-28Merge branch 'for-linus' of ↵Linus Torvalds13-107/+184
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: fix get_ticket_handler() error handling ceph: don't BUG on ENOMEM during mds reconnect ceph: ceph_mdsc_build_path() returns an ERR_PTR ceph: Fix warnings ceph: ceph_get_inode() returns an ERR_PTR ceph: initialize fields on new dentry_infos ceph: maintain i_head_snapc when any caps are dirty, not just for data ceph: fix osd request lru adjustment when sending request ceph: don't improperly set dir complete when holding EXCL cap mm: exporting account_page_dirty ceph: direct requests in snapped namespace based on nonsnap parent ceph: queue cap snap writeback for realm children on snap update ceph: include dirty xattrs state in snapped caps ceph: fix xattr cap writeback ceph: fix multiple mds session shutdown
2010-08-28Merge branch 'for-2.6.36' of git://linux-nfs.org/~bfields/linuxLinus Torvalds3-24/+30
* 'for-2.6.36' of git://linux-nfs.org/~bfields/linux: nfsd: fix NULL dereference in nfsd_statfs() nfsd4: fix downgrade/lock logic nfsd4: typo fix in find_any_file nfsd4: bad BUG() in preprocess_stateid_op
2010-08-27fsnotify: drop two useless bools in the fnsotify main loopEric Paris1-8/+5
The fsnotify main loop has 2 bools which indicated if we processed the inode or vfsmount mark in that particular pass through the loop. These bool can we replaced with the inode_group and vfsmount_group variables and actually make the code a little easier to understand. Signed-off-by: Eric Paris <eparis@redhat.com>
2010-08-27fsnotify: fix list walk orderEric Paris1-6/+5
Marks were stored on the inode and vfsmonut mark list in order from highest memory address to lowest memory address. The code to walk those lists thought they were in order from lowest to highest with unpredictable results when trying to match up marks from each. It was possible that extra events would be sent to userspace when inode marks ignoring events wouldn't get matched with the vfsmount marks. This problem only affected fanotify when using both vfsmount and inode marks simultaneously. Signed-off-by: Eric Paris <eparis@redhat.com>
2010-08-27fanotify: Return EPERM when a process is not privilegedAndreas Gruenbacher1-1/+1
The appropriate error code when privileged operations are denied is EPERM, not EACCES. Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Signed-off-by: Eric Paris <paris@paris.rdu.redhat.com>
2010-08-27eCryptfs: Fix encrypted file name lookup regressionTyler Hicks2-8/+24
Fixes a regression caused by 21edad32205e97dc7ccb81a85234c77e760364c8 When file name encryption was enabled, ecryptfs_lookup() failed to use the encrypted and encoded version of the upper, plaintext, file name when performing a lookup in the lower file system. This made it impossible to lookup existing encrypted file names and any newly created files would have plaintext file names in the lower file system. https://bugs.launchpad.net/ecryptfs/+bug/623087 Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
2010-08-27ecryptfs: properly mark init functionsJerome Marchand4-4/+4
Some ecryptfs init functions are not prefixed by __init and thus not freed after initialization. This patch saved about 1kB in ecryptfs module. Signed-off-by: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
2010-08-27fs/ecryptfs: Return -ENOMEM on memory allocation failureJulia Lawall1-0/+2
In this code, 0 is returned on memory allocation failure, even though other failures return -ENOMEM or other similar values. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression ret; expression x,e1,e2,e3; @@ ret = 0 ... when != ret = e1 *x = \(kmalloc\|kcalloc\|kzalloc\)(...) ... when != ret = e2 if (x == NULL) { ... when != ret = e3 return ret; } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
2010-08-26nfsd: fix NULL dereference in nfsd_statfs()Takashi Iwai1-6/+8
The commit ebabe9a9001af0af56c0c2780ca1576246e7a74b pass a struct path to vfs_statfs introduced the struct path initialization, and this seems to trigger an Oops on my machine. fh_dentry field may be NULL and set later in fh_verify(), thus the initialization of path must be after fh_verify(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-08-26Merge commit 'v2.6.36-rc1' into HEADJ. Bruce Fields587-14699/+18087
2010-08-26nfsd4: fix downgrade/lock logicJ. Bruce Fields2-16/+21
If we already had a RW open for a file, and get a readonly open, we were piggybacking on the existing RW open. That's inconsistent with the downgrade logic which blows away the RW open assuming you'll still have a readonly open. Also, make sure there is a readonly or writeonly open available for locking, again to prevent bad behavior in downgrade cases when any RW open may be lost. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-08-26nfsd4: typo fix in find_any_fileJ. Bruce Fields1-1/+1
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-08-26nfsd4: bad BUG() in preprocess_stateid_opJ. Bruce Fields1-1/+0
It's OK for this function to return without setting filp--we do it in the special-stateid case. And there's a legitimate case where we can hit this, since we do permit reads on write-only stateid's. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-08-26Cannot allocate memory error on mountSuresh Jayaraman1-1/+1
On 08/26/2010 01:56 AM, joe hefner wrote: > On a recent Fedora (13), I am seeing a mount failure message that I can not explain. I have a Windows Server 2003ýa with a share set up for access only for a specific username (say userfoo). If I try to mount it from Linux,ýusing userfoo and the correct password all is well. If I try with a bad password or with some other username (userbar), it fails with "Permission denied" as expected. If I try to mount as username = administrator, and give the correct administrator password, I would also expect "Permission denied", but I see "Cannot allocate memory" instead. > ýfs/cifs/netmisc.c: Mapping smb error code 5 to POSIX err -13 > ýfs/cifs/cifssmb.c: Send error in QPathInfo = -13 > ýCIFS VFS: cifs_read_super: get root inode failed Looks like the commit 0b8f18e3 assumed that cifs_get_inode_info() and friends fail only due to memory allocation error when the inode is NULL which is not the case if CIFSSMBQPathInfo() fails and returns an error. Fix this by propagating the actual error code back. Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-26ceph: fix get_ticket_handler() error handlingDan Carpenter1-6/+9
get_ticket_handler() returns a valid pointer or it returns ERR_PTR(-ENOMEM) if kzalloc() fails. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-26ceph: don't BUG on ENOMEM during mds reconnectSage Weil1-3/+4
We are in a position to return an error; do that instead. Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-26ceph: ceph_mdsc_build_path() returns an ERR_PTRDan Carpenter1-0/+4
ceph_mdsc_build_path() returns an ERR_PTR but this code is set up to handle NULL returns. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-26[CIFS] Eliminate unused variable warningSteve French1-1/+2
CC: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-25ceph: Fix warningsAlan Cox1-5/+9
Just scrubbing some warnings so I can see real problem ones in the build noise. For 32bit we need to coax gcc politely into believing we really honestly intend to the casts. Using (u64)(unsigned long) means we cast from a pointer to a type of the right size and then extend it. This stops the warning spew. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-25ceph: ceph_get_inode() returns an ERR_PTRDan Carpenter1-2/+2
ceph_get_inode() returns an ERR_PTR and it doesn't return a NULL. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds15-279/+622
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: Eliminate sparse warning - bad constant expression cifs: check for NULL session password missing changes during ntlmv2/ntlmssp auth and sign [CIFS] Fix ntlmv2 auth with ntlmssp cifs: correction of unicode header files cifs: fix NULL pointer dereference in cifs_find_smb_ses cifs: consolidate error handling in several functions cifs: clean up error handling in cifs_mknod
2010-08-24ceph: initialize fields on new dentry_infosSage Weil1-1/+1
Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-24ceph: maintain i_head_snapc when any caps are dirty, not just for dataSage Weil4-7/+26
We used to use i_head_snapc to keep track of which snapc the current epoch of dirty data was dirtied under. It is used by queue_cap_snap to set up the cap_snap. However, since we queue cap snaps for any dirty caps, not just for dirty file data, we need to keep a valid i_head_snapc anytime we have dirty|flushing caps. This fixes a NULL pointer deref in queue_cap_snap when writing back dirty caps without data (e.g., snaptest-authwb.sh). Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-24Eliminate sparse warning - bad constant expressionshirishpargaonkar@gmail.com2-72/+128
Eliminiate sparse warning during usage of crypto_shash_* APIs error: bad constant expression Allocate memory for shash descriptors once, so that we do not kmalloc/kfree it for every signature generation (shash descriptor for md5 hash). From ed7538619817777decc44b5660b52268077b74f3 Mon Sep 17 00:00:00 2001 From: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Date: Tue, 24 Aug 2010 11:47:43 -0500 Subject: [PATCH] eliminate sparse warnings during crypto_shash_* APis usage Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
2010-08-24xfs: do not discard page cache data on EAGAINChristoph Hellwig1-3/+6
If xfs_map_blocks returns EAGAIN because of lock contention we must redirty the page and not disard the pagecache content and return an error from writepage. We used to do this correctly, but the logic got lost during the recent reshuffle of the writepage code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Mike Gao <ygao.linux@gmail.com> Tested-by: Mike Gao <ygao.linux@gmail.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <dchinner@redhat.com>
2010-08-24xfs: don't do memory allocation under the CIL context lockDave Chinner1-8/+26
Formatting items requires memory allocation when using delayed logging. Currently that memory allocation is done while holding the CIL context lock in read mode. This means that if memory allocation takes some time (e.g. enters reclaim), we cannot push on the CIL until the allocation(s) required by formatting complete. This can stall CIL pushes for some time, and once a push is stalled so are all new transaction commits. Fix this splitting the item formatting into two steps. The first step which does the allocation and memcpy() into the allocated buffer is now done outside the CIL context lock, and only the CIL insert is done inside the CIL context lock. This avoids the stall issue. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 22:29:05 +0000