summaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)AuthorFilesLines
2014-11-18xattr: Constify ->name member of "struct xattr".Tetsuo Handa1-1/+1
Since everybody sets kstrdup()ed constant string to "struct xattr"->name but nobody modifies "struct xattr"->name , we can omit kstrdup() and its failure checking by constifying ->name member of "struct xattr". Change-Id: I6cb5cd7f29c01956dd0d1579af81a518a5936071 Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Joel Becker <jlbec@evilplan.org> [ocfs2] Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com> Acked-by: Casey Schaufler <casey@schaufler-ca.com> Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Reviewed-by: Paul Moore <paul@paul-moore.com> Tested-by: Paul Moore <paul@paul-moore.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
2014-11-18debugfs: add get/set for atomic typesSeth Jennings1-0/+42
debugfs currently lack the ability to create attributes that set/get atomic_t values. This patch adds support for this through a new debugfs_create_atomic_t() function. Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-18f2fs: fix handling orphan inodesJaegeuk Kim4-9/+28
This patch fixes mishandling of the sbi->n_orphans variable. If users request lots of f2fs_unlink(), check_orphan_space() could be contended. In such the case, sbi->n_orphans can be read incorrectly so that f2fs_unlink() would fall into the wrong state which results in the failure of add_orphan_inode(). So, let's increment sbi->n_orphans virtually prior to the actual orphan inode stuffs. After that, let's release sbi->n_orphans by calling release_orphan_inode or remove_orphan_inode. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: move bio_private allocation out of f2fs_bio_alloc()Gu Zheng2-9/+11
bio->bi_private is not always needed. As in the reading data path, end_read_io does not need bio_private for further using, so moving bio_private allocation out of f2fs_bio_alloc(). Alloc it in the submit_write_page(), and ignore it in the f2fs_readpage(). Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: use list_for_each rather than list_for_each_safe, in remove_orphan_inode()Gu Zheng1-3/+2
As we remove the target single node, so list_for_each is enought, in order to clean up, we use list_for_each_entry instead. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: use seq_puts()/seq_putc() rather than seq_printf() where possibleGu Zheng1-9/+9
For string without format specifiers, using seq_puts()/seq_putc() instead of seq_printf(). Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: fix i_name during f2fs_sync_fileJaegeuk Kim1-4/+6
As similar as the i_pino fix, i_name also should be fixed when i_nlink is 1. The errorneous scenario is like this. 1. touch test1 2. link test1 test2 3. unlink test2 4. fsync test1 After this, i_name should be test1. CC: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: update file name in the inode block during f2fs_renameJaegeuk Kim3-0/+21
The error is reproducible by: 0. mkfs.f2fs /dev/sdb1 & mount 1. touch test1 2. touch test2 3. mv test1 test2 4. umount 5. dumpt.f2fs -i 4 /dev/sdb1 After this, when we retrieve the inode->i_name of test2 by dump.f2fs, we get test1 instead of test2. This is because f2fs didn't update the file name during the f2fs_rename. So, this patch fixes that. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: introduce help function F2FS_NODE()Gu Zheng8-40/+35
Introduce help function F2FS_NODE() to simplify the conversion of node_page to f2fs_node. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: add a help func F2FS_STAT() to get the f2fs_stat_infoGu Zheng2-11/+16
Add a help func F2FS_STAT() to get the f2fs_stat_info. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: add proc entry to monitor current usage of segmentsJaegeuk Kim2-0/+47
You can monitor valid block counts of whole segments in: /proc/fs/f2fs/sdb1/segment_info. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: recover date requested by fdatasyncJaegeuk Kim1-3/+4
In order to support SQLite that uses fdatasync instead of fsync, we should guarantee the data requested by fdatasync can be recovered after sudden-power- off. So, let's remove the fdatasync condition in f2fs_sync_file. Otherwise, we can restore the data after sudden-power-off due to nonexistence of any fsync mark'ed node blocks. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: fix to recover i_size from roll-forwardJaegeuk Kim1-1/+22
If user requests many data writes and fsync together, the last updated i_size should be stored to the inode block consistently. But, previous write_end just marks the inode as dirty and doesn't update its metadata into its inode block. After that, fsync just writes the inode block with newly updated data index excluding inode metadata updates. So, this patch introduces write_end in which updates inode block too when the i_size is changed. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: remove the unused argument "sbi" of func destroy_fsync_dnodes()Gu Zheng1-3/+2
As destroy_fsync_dnodes() is a simple list-cleanup func, so delete the unused and unrelated f2fs_sb_info argument of it. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: remove reusing any prefree segmentsJaegeuk Kim1-55/+1
This patch removes check_prefree_segments initially designed to enhance the performance by narrowing the range of LBA usage across the whole block device. When allocating a new segment, previous f2fs tries to find proper prefree segments, and then, if finds a segment, it reuses the segment for further data or node block allocation. However, I found that this was totally wrong approach since the prefree segments have several data or node blocks that will be used by the roll-forward mechanism operated after sudden-power-off. Let's assume the following scenario. /* write 8MB with fsync */ for (i = 0; i < 2048; i++) { offset = i * 4096; write(fd, offset, 4KB); fsync(fd); } In this case, naive segment allocation sequence will be like: data segment: x, x+1, x+2, x+3 node segment: y, y+1, y+2, y+3. But, if we can reuse prefree segments, the sequence can be like: data segment: x, x+1, y, y+1 node segment: y, y+1, y+2, y+3. Because, y, y+1, and y+2 became prefree segments one by one, and those are reused by data allocation. After conducting this workload, we should consider how to recover the latest inode with its data. If we reuse the prefree segments such as y or y+1, we lost the old node blocks so that f2fs even cannot start roll-forward recovery. Therefore, I suggest that we should remove reusing prefree segments. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: code cleanup and simplify in func {find/add}_gc_inodeGu Zheng1-12/+5
This patch simplifies list operations in find_gc_inode and add_gc_inode. Just simple code cleanup. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> [Jaegeuk Kim: add description] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: optimize the init_dirty_segmap functionNamjae Jeon1-4/+4
Optimize the while loop condition Since this condition will always be true and while loop will be terminated by the following condition in code: if (segno >= TOTAL_SEGS(sbi)) break; Hence we can replace the while loop condition with while(1) instead of always checking for segno to be less than Total segs. Also we do not need to use TOTAL_SEGS() everytime. We can store this value in a local variable since this value is constant. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: fix an endian conversion bug detected by sparseJaegeuk Kim1-2/+2
This patch should fix the following bug reported by kbuild test robot. fs/f2fs/recovery.c:233:33: sparse: incorrect type in assignment (different base types) parse warnings: (new ones prefixed by >>) >> recovery.c:233: sparse: incorrect type in assignment (different base types) recovery.c:233: expected unsigned int [unsigned] [assigned] ofs_in_node recovery.c:233: got restricted __le16 [assigned] [usertype] ofs_in_node >> recovery.c:238: sparse: incorrect type in assignment (different base types) recovery.c:238: expected unsigned int [unsigned] ofs_in_node recovery.c:238: got restricted __le16 [assigned] [usertype] ofs_in_node Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: fix crc endian conversionJaegeuk Kim2-10/+21
While calculating CRC for the checkpoint block, we use __u32, but when storing the crc value to the disk, we use __le32. Let's fix the inconsistency. Reported-and-Tested-by: Oded Gabbay <ogabbay@advaoptical.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: add remount_fs callback supportNamjae Jeon1-82/+153
Add the f2fs_remount function call which will be used during the filesystem remounting. This function will help us to change the mount options specific to f2fs. Also modify the f2fs background_gc mount option, which will allow the user to dynamically trun on/off the garbage collection in f2fs based on the background_gc value. If background_gc=on, Garbage collection will be turned off & if background_gc=off, Garbage collection will be truned on. By default the garbage collection is on in f2fs. Change Log: v2: Incorporated the review comments by Gu Zheng. Removing the restore part for VFS flags Updating comments with proper flag conditions Display GC background option as ON/OFF Revised conditions to stop GC in case of remount v1: Initial changes for adding remount_fs callback support. Cc: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com> Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com> [Jaegeuk Kim: change /** with /* for the coding style] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: recover wrong pino after checkpoint during fsyncJaegeuk Kim6-9/+45
If a file is linked, f2fs loose its parent inode number so that fsync calls for the linked file should do checkpoint all the time. But, if we can recover its parent inode number after the checkpoint, we can adjust roll-forward mechanism for the further fsync calls, which is able to improve the fsync performance significatly. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: optimize do_write_data_page()Haicheng Li1-2/+3
Since "need_inplace_update() == true" is a very rare case, using unlikely() to give compiler a chance to optimize the code. Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: make locate_dirty_segment() as staticHaicheng Li2-2/+1
It's used only locally and could be static. Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: remove unnecessary parameter "offset" from __add_sum_entry()Haicheng Li1-5/+5
We can get the value directly from pointer "curseg". Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: avoid freqeunt write_inode callsJaegeuk Kim4-0/+18
If update_inode is called, we don't need to do write_inode. So, let's use a *dirty* flag for each inode. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: optimise the truncate_data_blocks_range() rangeNamjae Jeon1-1/+1
The function truncate_data_blocks_range() decrements the valid block count of inode via dec_valid_block_count(). Since this function updates the i_blocks field of inode, we can update this field once we have calculated total the number of blocks to be freed. Therefore we can decrement valid blocks outside of the for loop. if (nr_free) { + dec_valid_block_count(sbi, dn->inode, nr_free); set_page_dirty(dn->node_page); sync_inode_page(dn); } 'nr_free' tells the total number of blocks freed. So, we can just directly pass this value to dec_valid_block_count() and update the i_blocks. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: use the F2FS specific flags in f2fs_ioctl()Namjae Jeon1-2/+2
In f2fs_ioctl() function, it is using generic flags. Since F2FS specific flags are defined. So lets use those flags. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: sync dir->i_size with its block allocationJaegeuk Kim3-5/+7
If new dentry block is allocated and its i_size is updated, we should update its inode block together in order to sync i_size and its block allocation. Otherwise, we can loose additional dentry block due to the unconsistent i_size. Errorneous Scenario ------------------- In the recovery routine, - recovery_dentry | - __f2fs_add_link | | - get_new_data_page | | | - i_size_write(new_i_size) | | | - mark_inode_dirty_sync(dir) | | - update_parent_metadata | | | - mark_inode_dirty(dir) | - write_checkpoint - sync_dirty_dir_inodes - filemap_flush(dentry_blocks) - f2fs_write_data_page - skip to write the last dentry block due to index < i_size In the above flow, new_i_size is not updated to its inode block so that the last dentry block will be lost accordingly. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: fix i_blocks translation on various types of filesJaegeuk Kim3-1/+5
Basically an inode manages the number of allocated blocks with inode->i_blocks which is represented in a unit of sectors, not file system blocks. But, f2fs has used i_blocks in a unit of file system blocks, and f2fs_getattr translates it to the number of sectors when fstat is called. However, previously f2fs_file_inode_operations only has this, so this patch adds it to all the types of inode_operations. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: set sb->s_fs_info before calling parse_options()Gu Zheng1-4/+4
In f2fs_fill_super(), set sb->s_fs_info before calling parse_options(), then we can get f2fs_sb_info via F2FS_SB(sb) in parse_options(). So that the second argument "sbi" of func parse_options() is no longer needed. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: support xattr security labelsJaegeuk Kim7-21/+100
This patch adds the support of security labels for f2fs, which will be used by Linus Security Models (LSMs). Quote from http://en.wikipedia.org/wiki/Linux_Security_Modules: "Linux Security Modules (LSM) is a framework that allows the Linux kernel to support a variety of computer security models while avoiding favoritism toward any single security implementation. The framework is licensed under the terms of the GNU General Public License and is standard part of the Linux kernel since Linux 2.6. AppArmor, SELinux, Smack and TOMOYO Linux are the currently accepted modules in the official kernel.". Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: fix iget/iput of dir during recoveryJaegeuk Kim3-16/+41
It is possible that iput is skipped after iget during the recovery. In recover_dentry(), dir = f2fs_iget(); ... if (de && inode->i_ino == le32_to_cpu(de->ino)) goto out; In this case, this dir is not able to be added in dirty_dir_inode_list. The actual linking is done only when set_page_dirty() is called. So let's add this newly got inode into the list explicitly, and put it at the end of the recovery routine. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: reorganise the function get_victim_by_defaultNamjae Jeon1-4/+4
Fix the function get_victim_by_default, where it checks for the condition that p.min_segno != NULL_SEGNO as shown: if (p.min_segno != NULL_SEGNO) goto got_it; and if above condition is true then got_it: if (p.min_segno != NULL_SEGNO) { So this condition is being checked twice. Hence move the goto statement after the if condition so that duplication of condition check is avoided. Also this function makes a call to get_max_cost() to compute the max cost based on the f2fs_sbi_info and victim policy. Since get_max_cost depends on on three parameters of victim_sel_policy => alloc_mode, gc_mode & ofs_unit, once this victim policy is initialised, these value will not change till the execution time of get_victim_by_default() & also f2fs_sbi_info structure parameters will not change. Hence making calls to get_max_cost() in while loop does not seems to be a good point. Instead we can call it once in begining and store the results in local variable, which later can serve our purpose for comparing the cost with max cost inside the while loop. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: handle errors from get_node_page callsJason Hrycay1-0/+4
Add check for error pointers returned from get_node_page in order to avoid dereferencing a bad address on the next use. Signed-off-by: Jason Hrycay <jason.hrycay@motorola.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: cover cp_file information with ilockJaegeuk Kim2-7/+7
If a file is linked with other files, it should be checkpointed at every fsync calls. For this, we use set_cp_file() with FADVISE_CP_BIT, but previously we didn't cover the flag by the global lock. This patch fixes that the inode page stores this correctly. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: fix incorrect iputs during the dentry recoveryJaegeuk Kim1-1/+3
- iget/iput flow in the dentry recovery process 1. *dir* = f2fs_iget 2. set FI_DELAY_IPUT to *dir* 3. add *dir* to the dirty_dir_list - __f2fs_add_link - recover_dentry) 4. iput *dir* by remove_dirty_dir_inode - sync_dirty_dir_inodes - write_chekcpoint If *dir*'s i_count is not 1 (i.e., root dir), remove_dirty_dir_inode is called later and then iput is triggered again due to the FI_DELAY_IPUT flag. So, let's unset the flag properly once iput is triggered. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: fix dentry recovery routineJaegeuk Kim1-5/+19
The error scenario is: 1. create /a (1.a link /a /b) 2. sync 3. unlinke /a 4. create /a 5. fsync /a 6. Sudden power-off When the f2fs recovers the fsynced dentry, /a, we discover an exsiting dentry at f2fs_find_entry() in recover_dentry(). In such the case, we should unlink the existing dentry and its inode and then recover newly created dentry. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: iput only if whole data blocks are flushedJaegeuk Kim1-3/+4
If there remains some unwritten blocks from the recovery, we should not call iput on that directory inode. Otherwise, we can loose some dentry blocks after the recovery. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: return proper error from start_gc_threadNamjae Jeon1-5/+10
when there is an error from kthread_run, then return proper error rather than returning -ENOMEM. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: optimize several routines in node.hNamjae Jeon1-48/+19
There are various functions with common code which could be separated out to make common routines. So, made new routines and in order to retain the same call path and no major changes, written some macros to access those routines. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: remove unneeded initializations in f2fs_parent_dirNamjae Jeon1-3/+3
There is no need to initialize few pointers in f2fs_parent_dir as the values are not checked and instead directly initialized values are used. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: push some variables to debug partNamjae Jeon5-2/+21
Some, counters are needed only for the statistical information while debugging. So, those can be controlled using CONFIG_F2FS_STAT_FS, pushing the usage for few variables under this flag. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: align data types between on-disk and in-memory block addressesJaegeuk Kim1-1/+4
The on-disk block address is defined as __le32, but in-memory block address, block_t, does as u64. Let's synchronize them to 32 bits. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: dereferencing an ERR_PTRDan Carpenter1-1/+2
There is an error path where "dir" is an ERR_PTR. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: use iholdJaegeuk Kim1-1/+1
Use the following helper function committed by Al. commit 7de9c6ee3ecffd99e1628e81a5ea5468f7581a1f Author: Al Viro <viro@zeniv.linux.org.uk> Date: Sat Oct 23 11:11:40 2010 -0400 new helper: ihold() ... Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: should not make_bad_inode on f2fs_link failureJaegeuk Kim1-1/+0
If -ENOSPC is met during f2fs_link, we should not make the inode as bad. The inode is still alive. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: fix to handle do_recover_data errorsJaegeuk Kim1-9/+15
This patch adds error handling codes of check_index_in_prev_nodes and its caller, do_recover_data. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: reuse the locked dnode page and its inodeJaegeuk Kim3-6/+23
This patch fixes the following deadlock bug during the recovery. INFO: task mount:1322 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. mount D ffffffff81125870 0 1322 1266 0x00000000 ffff8801207e39d8 0000000000000046 ffff88012ab1dee0 0000000000000046 ffff8801207e3a08 ffff880115903f40 ffff8801207e3fd8 ffff8801207e3fd8 ffff8801207e3fd8 ffff880115903f40 ffff8801207e39d8 ffff88012fc94520 Call Trace: [<ffffffff81125870>] ? __lock_page+0x70/0x70 [<ffffffff816a92d9>] schedule+0x29/0x70 [<ffffffff816a93af>] io_schedule+0x8f/0xd0 [<ffffffff8112587e>] sleep_on_page+0xe/0x20 [<ffffffff816a649a>] __wait_on_bit_lock+0x5a/0xc0 [<ffffffff81125867>] __lock_page+0x67/0x70 [<ffffffff8106c7b0>] ? autoremove_wake_function+0x40/0x40 [<ffffffff81126857>] find_lock_page+0x67/0x80 [<ffffffff8112698f>] find_or_create_page+0x3f/0xb0 [<ffffffffa03901a8>] ? sync_inode_page+0xa8/0xd0 [f2fs] [<ffffffffa038fdf7>] get_node_page+0x67/0x180 [f2fs] [<ffffffffa039818b>] recover_fsync_data+0xacb/0xff0 [f2fs] [<ffffffff816aaa1e>] ? _raw_spin_unlock+0x3e/0x40 [<ffffffffa0389634>] f2fs_fill_super+0x7d4/0x850 [f2fs] [<ffffffff81184cf9>] mount_bdev+0x1c9/0x210 [<ffffffffa0388e60>] ? validate_superblock+0x180/0x180 [f2fs] [<ffffffffa0387635>] f2fs_mount+0x15/0x20 [f2fs] [<ffffffff81185a13>] mount_fs+0x43/0x1b0 [<ffffffff81145ba0>] ? __alloc_percpu+0x10/0x20 [<ffffffff811a0796>] vfs_kern_mount+0x76/0x120 [<ffffffff811a2cb7>] do_mount+0x237/0xa10 [<ffffffff81140b9b>] ? strndup_user+0x5b/0x80 [<ffffffff811a3520>] SyS_mount+0x90/0xe0 [<ffffffff816b3502>] system_call_fastpath+0x16/0x1b The bug is triggered when check_index_in_prev_nodes tries to get the direct node page by calling get_node_page. At this point, if the direct node page is already locked by get_dnode_of_data, its caller, we got a deadlock condition. This patch adds additional condition check for the reuse of locked direct node pages prior to the get_node_page call. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: fix wrong condition checkJaegeuk Kim1-6/+0
While an orphan inode has zero link_count, f2fs_gc is able to select the inode for foreground gc. - f2fs_gc - do_garbage_collect - gc_data_segment : f2fs_iget is failed : get_valid_blocks() != 0, so that retry --> here we got the infinite loop. This patch resolved this issue. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-11-18f2fs: add f2fs_readonly()Jaegeuk Kim3-2/+7
Introduce a simple macro function for readability. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 01:12:29 +0000