summaryrefslogtreecommitdiff
path: root/fs/udf/inode.c
AgeCommit message (Collapse)AuthorFilesLines
2009-04-02udf: fix default mode and dmode options handlingMarcin Slusarz1-2/+2
On x86 (and several other archs) mode_t is defined as "unsigned short" and comparing unsigned shorts to negative ints is broken (because short is promoted to int and then compared). Fix it. Reported-and-tested-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2009-04-02udf: implement mode and dmode mounting optionsMarcin Slusarz1-2/+9
"dmode" allows overriding permissions of directories and "mode" allows overriding permissions of files. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jan Kara <jack@suse.cz>
2009-04-02Fix the udf code not to pass structs on stack where possible.Pekka Enberg1-35/+35
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Jan Kara <jack@suse.cz>
2009-04-02Remove struct typedefs from fs/udf/ecma_167.h et al.Pekka Enberg1-70/+70
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Jan Kara <jack@suse.cz>
2008-11-27udf: Fix BUG_ON() in destroy_inode()Jan Kara1-0/+1
udf_clear_inode() can leave behind buffers on mapping's i_private list (when we truncated preallocation). Call invalidate_inode_buffers() so that the list is properly cleaned-up before we return from udf_clear_inode(). This is ugly and suggest that we should cleanup preallocation earlier than in clear_inode() but currently there's no such call available since drop_inode() is called under inode lock and thus is unusable for disk operations. Signed-off-by: Jan Kara <jack@suse.cz>
2008-04-17udf: use crc_itu_t from lib instead of udf_crcBob Copeland1-5/+6
As pointed out by Sergey Vlasov, UDF implements its own version of the CRC ITU-T V.41. Convert it to use the one in the library. Signed-off-by: Bob Copeland <me@bobcopeland.com> Cc: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Jan Kara <jack@suse.cz>
2008-04-17udf: Add read-only support for 2.50 UDF mediaJan Kara1-0/+9
This patch implements parsing of metadata partitions and reading of Metadata File thus allowing to read UDF 2.50 media. Error resilience is implemented through accessing the Metadata Mirror File in case the data the Metadata File cannot be read. The patch is based on the original patch by Sebastian Manciulea <manciuleas@yahoo.com> and Mircea Fedoreanu <mirceaf_spl@yahoo.com>. Signed-off-by: Sebastian Manciulea <manciuleas@yahoo.com> Signed-off-by: Mircea Fedoreanu <mirceaf_spl@yahoo.com> Signed-off-by: Jan Kara <jack@suse.cz>
2008-04-17udf: Allow loading of VAT inodeJan Kara1-0/+1
UDF media with VAT could have never worked because udf_fill_inode() didn't know about case FILE_TYPE_VAT20. Fix this. Signed-off-by: Jan Kara <jack@suse.cz>
2008-04-17udf: convert udf_stamp_to_time and udf_time_to_stamp to use timestampsMarcin Slusarz1-29/+16
* kernel_timestamp type was almost unused - only callers of udf_stamp_to_time and udf_time_to_stamp used it, so let these functions handle endianness internally and don't clutter code with conversions * rename udf_stamp_to_time to udf_disk_stamp_to_time and udf_time_to_stamp to udf_time_to_disk_stamp Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2008-04-17udf: convert udf_stamp_to_time to return struct timespecmarcin.slusarz@gmail.com1-23/+26
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2008-04-17udf: create function for conversion from timestamp to timespecmarcin.slusarz@gmail.com1-56/+23
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2008-04-17udf: udf_get_block, inode_bmap - remove unneeded checksmarcin.slusarz@gmail.com1-12/+0
block cannot be less than 0, because it's sector_t, so remove unneeded checks Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2008-04-17udf: simplify __udf_read_inodemarcin.slusarz@gmail.com1-29/+23
- move all brelse(ibh) after main if, because it's called on every path except one where ibh is null - move variables to the most inner blocks Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2008-04-17udf: replace all adds to little endians variables with le*_add_cpumarcin.slusarz@gmail.com1-12/+4
replace all: little_endian_variable = cpu_to_leX(leX_to_cpu(little_endian_variable) + expression_in_cpu_byteorder); with: leX_add_cpu(&little_endian_variable, expression_in_cpu_byteorder); sparse didn't generate any new warning with this patch Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com Signed-off-by: Jan Kara <jack@suse.cz>
2008-04-17udf: kill useless file header comments for vfs method implementationsChristoph Hellwig1-31/+1
There's not need to document vfs method invocation rules, we have Documentation/filesystems/vfs.txt and Documentation/filesystems/Locking for that. Also a lot of these comments where either plain wrong or horrible out of date. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2008-02-08udf: fix adding entry to a directoryJan Kara1-1/+1
When adding directory entry to a directory, we have to properly increase length of the last extent. Handle this similarly as extending regular files - make extents always have size multiple of block size (it will be truncated down to proper size in udf_clear_inode()). Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08udf: cleanup directory offset handlingJan Kara1-4/+4
Position in directory returned by readdir is offset of directory entry divided by four (don't ask me why). Make this conversion only when reading f_pos from userspace / writing it there and internally work in bytes. It makes things more easily readable and also fixes a bug (we forgot to divide length of the entry by 4 when advancing f_pos in udf_add_entry()). Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08udf: avoid unnecessary synchronous writesMike Galbraith1-1/+1
Fix udf_clear_inode() to request asynchronous writeout in icache reclaim path. Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08udf: fix 3 signedness & 1 unitialized variable warningsMarcin Slusarz1-3/+3
sparse generated: fs/udf/inode.c:324:41: warning: incorrect type in argument 4 (different signedness) fs/udf/inode.c:324:41: expected long *<noident> fs/udf/inode.c:324:41: got unsigned long *<noident> inode_getblk always set 4th argument to uint32_t value 3rd parameter of map_bh is sector_t (which is unsigned long or u64) so convert phys value to sector_t fs/udf/inode.c:1818:47: warning: incorrect type in argument 3 (different signedness) fs/udf/inode.c:1818:47: expected int *<noident> fs/udf/inode.c:1818:47: got unsigned int *<noident> fs/udf/inode.c:1826:46: warning: incorrect type in argument 3 (different signedness) fs/udf/inode.c:1826:46: expected int *<noident> fs/udf/inode.c:1826:46: got unsigned int *<noident> udf_get_filelongad and udf_get_shortad are called always for uint32_t values (struct extent_position->offset), so it's safe to convert offset parameter to uint32_t gcc warned: fs/udf/inode.c: In function 'udf_get_block': fs/udf/inode.c:299: warning: 'phys' may be used uninitialized in this function initialize it to 0 (if someday someone will break inode_getblk we will catch it immediately) Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Ben Fennema <bfennema@falcon.csc.calpoly.edu> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08udf: cache struct udf_inode_infoMarcin Slusarz1-143/+162
cache UDF_I(struct inode *) return values when there are at least 2 uses in one function Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08udf: remove UDF_I_* macros and open code themMarcin Slusarz1-145/+151
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08udf: convert byte order of constant instead of variableMarcin Slusarz1-8/+8
convert byte order of constant instead of variable, which can be done at compile time (vs run time) Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08udf: create common function for tag checksummingMarcin Slusarz1-13/+2
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08udf: fix coding styleMarcin Slusarz1-264/+401
fix coding style errors found by checkpatch: - assignments in if conditions - braces {} around single statement blocks - no spaces after commas - printks without KERN_* - lines longer than 80 characters - spaces between "type *" and variable name before: 192 errors, 561 warnings, 8987 lines checked after: 1 errors, 38 warnings, 9468 lines checked Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08udf: remove some ugly macrosMarcin Slusarz1-16/+18
remove macros: - UDF_SB_PARTMAPS - UDF_SB_PARTTYPE - UDF_SB_PARTROOT - UDF_SB_PARTLEN - UDF_SB_PARTVSN - UDF_SB_PARTNUM - UDF_SB_TYPESPAR - UDF_SB_TYPEVIRT - UDF_SB_PARTFUNC - UDF_SB_PARTFLAGS - UDF_SB_VOLIDENT - UDF_SB_NUMPARTS - UDF_SB_PARTITION - UDF_SB_SESSION - UDF_SB_ANCHOR - UDF_SB_LASTBLOCK - UDF_SB_LVIDBH - UDF_SB_LVID - UDF_SB_UMASK - UDF_SB_GID - UDF_SB_UID - UDF_SB_RECORDTIME - UDF_SB_SERIALNUM - UDF_SB_UDFREV - UDF_SB_FLAGS - UDF_SB_VAT - UDF_UPDATE_UDFREV - UDF_SB_FREE and open code them convert UDF_SB_LVIDIU macro to udf_sb_lvidiu function rename some struct udf_sb_info fields: - s_volident to s_volume_ident - s_lastblock to s_last_block - s_lvidbh to s_lvid_bh - s_recordtime to s_record_time - s_serialnum to s_serial_number; - s_vat to s_vat_inode; Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Ben Fennema <bfennema@falcon.csc.calpoly.edu> Cc: Jan Kara <jack@suse.cz> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16udf: convert to new aopsNick Piggin1-5/+8
Convert udf to new aops. Also seem to have fixed pagecache corruption in udf_adinicb_commit_write -- page was marked uptodate when it is not. Also, fixed the silly setup where prepare_write was doing a kmap to be used in commit_write: just do kmap_atomic in write_end. Use libfs helpers to make this easier. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: <bfennema@falcon.csc.calpoly.edu> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31UDF: fix UID and GID mount option ignoranceCyrill Gorcunov1-4/+6
This patch fix weird behaviour of UDF mounting procedure. To get UID changed (for now) we have to type mount -t udf -o uid=some_user,uid=ignore /dev/device /mnt/moun_point and specifying two uid at once is strange a bit. So with the patch we are able to mount without additional 'uid=ignore' option. The same for GID option is done. This patch will not break current mount scheme (with two option). Btw this does fix (I hope) the following [BUG 6124] mount of UDF fs ignores UID and GID options http://bugzilla.kernel.org/show_bug.cgi?id=6124 Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Jan Kara <jack@ucw.cz> Cc: Michael <auslands-kv@gmx.de> Cc: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-21UDF: coding style conversion - lindent fixupsCyrill Gorcunov1-580/+368
This patch fixes up sources after conversion by Lindent. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19UDF: coding style conversion - lindentCyrill Gorcunov1-728/+766
This patch converts UDF coding style to kernel coding style using Lindent. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16UDF: check for allocated memory for inode dataCyrill Gorcunov1-12/+39
This patch adds checking for granted memory while filling up inode data to prevent possible NULL pointer usage. If there is not enough memory to fill inode data we just mark it as "bad". Also some whitespace cleanup. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Jan Kara <jack@ucw.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-16udf: fix possible leakage of blocksJan Kara1-1/+10
We have to take care that when we call udf_discard_prealloc() from udf_clear_inode() we have to write inode ourselves afterwards (otherwise, some changes might be lost leading to leakage of blocks, use of free blocks or improperly aligned extents). Also udf_discard_prealloc() does two different things - it removes preallocated blocks and truncates the last extent to exactly match i_size. We move the latter functionality to udf_truncate_tail_extent(), call udf_discard_prealloc() when last reference to a file is dropped and call udf_truncate_tail_extent() when inode is being removed from inode cache (udf_clear_inode() call). We cannot call udf_truncate_tail_extent() earlier as subsequent open+write would find the last block of the file mapped and happily write to the end of it, although the last extent says it's shorter. [akpm@linux-foundation.org: Make checkpatch.pl happier] Signed-off-by: Jan Kara <jack@suse.cz> Cc: Eric Sandeen <sandeen@sandeen.net> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-01Fix possible UDF data corruptionJan Kara1-4/+8
update_next_aext() could possibly rewrite values in elen and eloc, possibly leading to data corruption when rewriting a file. Use temporary variables instead. Also advance cur_epos as it can also point to an indirect extent pointer. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08udf: support files larger than 1GJan Kara1-35/+157
Make UDF work correctly for files larger than 1GB. As no extent can be longer than (1<<30)-blocksize bytes, we have to create several extents if a big hole is being created. As a side-effect, we now don't discard preallocated blocks when creating a hole. Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08udf: use get_bh()Jan Kara1-37/+37
Make UDF use get_bh() instead of directly accessing b_count and use brelse() instead of udf_release_data() which does just brelse()... Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08UDF: introduce struct extent_positionJan Kara1-174/+169
Introduce a structure extent_position to store a position of an extent and the corresponding buffer_head in one place. Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08udf: use sector_t and loff_t for file offsetsJan Kara1-13/+15
Use sector_t and loff_t for file offsets in UDF filesystem. Otherwise an overflow may occur for long files. Also make inode_bmap() return offset in the extent in number of blocks instead of number of bytes - for most callers this is more convenient. Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-10-01[PATCH] r/o bind mount prepwork: inc_nlink() helperDave Hansen1-1/+1
This is mostly included for parity with dec_nlink(), where we will have some more hooks. This one should stay pretty darn straightforward for now. Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Acked-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27[PATCH] inode-diet: Eliminate i_blksize from the inode structureTheodore Ts'o1-2/+0
This eliminates the i_blksize field from struct inode. Filesystems that want to provide a per-inode st_blksize can do so by providing their own getattr routine instead of using the generic_fillattr() function. Note that some filesystems were providing pretty much random (and incorrect) values for i_blksize. [bunk@stusta.de: cleanup] [akpm@osdl.org: generic_fillattr() fix] Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-28[PATCH] mark address_space_operations constChristoph Hellwig1-1/+1
Same as with already do with the file operations: keep them in .rodata and prevents people from doing runtime patching. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Steven French <sfrench@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-02BUG_ON() Conversion in fs/udf/Eric Sesterhenn1-4/+2
this changes if() BUG(); constructs to BUG_ON() which is cleaner, contains unlikely() and can better optimized away. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-03-25[PATCH] udf: fix uid/gid options and add uid/gid=ignore and forget optionsPhillip Susi1-4/+2
As Pekka Enberg pointed out, with the if still following the else, you can still get a null uid written to the disk if you specify a default uid= without uid=forget. In other words, if the desktop user is uid=1000 and the mount option uid=1000 is given ( which is done on ubuntu automatically and probably other distributions that use hal ), then if any other user besides uid 1000 owns a file then a 0 will be written to the media as the owning uid instead. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-08[PATCH] udf: fix uid/gid options and add uid/gid=ignore and forget optionsPhillip Susi1-4/+12
Fix a bug in udf where it would write uid/gid = 0 to the disk for files owned by the id given with the uid=/gid= mount options. It also adds 4 new mount options: uid/gid=forget and uid/gid=ignore. Without any options the id in core and on disk always match. Giving uid/gid=nnn specifies a default ID to be used in core when the on disk ID is -1. uid/gid=ignore forces the in core ID to allways be used no matter what the on disk ID is. uid/gid=forget forces the on disk ID to always be written out as -1. The use of these options allows you to override ownerships on a disk or disable ownwership information from being written, allowing the media to be used portably between different computers and possibly different users without permissions issues that would require root to correct. Signed-off-by: Phillip Susi <psusi@cfl.rr.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08[PATCH] udf: remove bogus inode == NULL check in inode_bmapChristoph Hellwig1-5/+0
inode can never be NULL when calling this function. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-03remove pointers to the defunct UDF mailing listAdrian Bunk1-5/+0
This patch removes pointers to the defunct UDF mailing list. Signed-off-by: Adrian Bunk <bunk@stusta.de>
2005-09-09[PATCH] update filesystems for new delete_inode behaviorMark Fasheh1-0/+2
Update the file systems in fs/ implementing a delete_inode() callback to call truncate_inode_pages(). One implementation note: In developing this patch I put the calls to truncate_inode_pages() at the very top of those filesystems delete_inode() callbacks in order to retain the previous behavior. I'm guessing that some of those could probably be optimized. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01[PATCH] Exterminate PAGE_BUGMatt Mackall1-2/+2
Remove PAGE_BUG - repalce it with BUG and BUG_ON. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds1-0/+2010
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!