| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Document get_subdir and that find_subdir alwasy takes a reference.
Suggested-by: Lucian Adrian Grijincu <lucian.grijincu@gmail.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
When insert_header fails ensure we return the proper error value
from get_subdir. In practice nothing cares, but there is no
need to be sloppy.
Reported-by: Lucian Adrian Grijincu <lucian.grijincu@gmail.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Suggested-by: Lucian Adrian Grijincu <lucian.grijincu@gmail.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Once /proc/pid/mem is opened, the memory can't be released until
mem_release() even if its owner exits.
Change mem_open() to do atomic_inc(mm_count) + mmput(), this only
pins mm_struct. Change mem_rw() to do atomic_inc_not_zero(mm_count)
before access_remote_vm(), this verifies that this mm is still alive.
I am not sure what should mem_rw() return if atomic_inc_not_zero()
fails. With this patch it returns zero to match the "mm == NULL" case,
may be it should return -EINVAL like it did before e268337d.
Perhaps it makes sense to add the additional fatal_signal_pending()
check into the main loop, to ensure we do not hold this memory if
the target task was oom-killed.
Cc: stable@kernel.org
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
No functional changes, cleanup and preparation.
mem_read() and mem_write() are very similar. Move this code into the
new common helper, mem_rw(), which takes the additional "int write"
argument.
Cc: stable@kernel.org
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
mem_release() can hit mm == NULL, add the necessary check.
Cc: stable@kernel.org
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The current code is a nop.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
"links" is never used, so we can remove it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
The plan is to convert all callers of register_sysctl_table
and register_sysctl_paths to register_sysctl. The interface
to register_sysctl is enough nicer this should make the callers
a bit more readable. Additionally after the conversion the
230 lines of backwards compatibility can be removed.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
One of the most important jobs of sysctl is to export network stack
tunables. Several of those tunables are per network device. In
several instances people are running with 1000+ network devices in
there network stacks, which makes the simple per directory linked list
in sysctl a scaling bottleneck. Replace O(N^2) sysctl insertion and
lookup times with O(NlogN) by using an rbtree to index the sysctl
directories.
Benchmark before:
make-dummies 0 999 -> 0.32s
rmmod dummy -> 0.12s
make-dummies 0 9999 -> 1m17s
rmmod dummy -> 17s
Benchmark after:
make-dummies 0 999 -> 0.074s
rmmod dummy -> 0.070s
make-dummies 0 9999 -> 3.4s
rmmod dummy -> 0.44s
Benchmark after (without dev_snmp6):
make-dummies 0 9999 -> 0.75s
rmmod dummy -> 0.44s
make-dummies 0 99999 -> 11s
rmmod dummy -> 4.3s
At 10,000 dummy devices the bottleneck becomes the time to add and
remove the files under /proc/sys/net/dev_snmp6. I have commented
out the code that adds and removes files under /proc/sys/net/dev_snmp6
and taken measurments of creating and destroying 100,000 dummies to
verify the sysctl continues to scale.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Slightly enhance efficiency and clarity of the code by making the
header list per directory instead of per set.
Benchmark before:
make-dummies 0 999 -> 0.63s
rmmod dummy -> 0.12s
make-dummies 0 9999 -> 2m35s
rmmod dummy -> 18s
Benchmark after:
make-dummies 0 999 -> 0.32s
rmmod dummy -> 0.12s
make-dummies 0 9999 -> 1m17s
rmmod dummy -> 17s
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Simplify the callers of insert_header by removing explicit calls to check
for duplicates and instead have insert_header do the work.
This makes the code slightly more maintainable by enabling changes to
data structures where the insertion of new entries without duplicate
suppression is not possible.
There is not always a convenient path string where insert_header
is called so modify sysctl_check_dups to use sysctl_print_dir
when printing the full path when a duplicate is discovered.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
an nsproxy
An nsproxy argument here has always been awkard and now the nsproxy argument
is completely unnecessary so remove it, replacing it with the set we want
the registered tables to show up in.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Piecing together directories by looking first in one directory
tree, than in another directory tree and finally in a third
directory tree makes it hard to verify that some directory
entries are not multiply defined and makes it hard to create
efficient implementations the sysctl filesystem.
Replace the sysctl wide list of roots with autogenerated
links from the core sysctl directory tree to the other
sysctl directory trees.
This simplifies sysctl directory reading and lookups as now
only entries in a single sysctl directory tree need to be
considered.
Benchmark before:
make-dummies 0 999 -> 0.44s
rmmod dummy -> 0.065s
make-dummies 0 9999 -> 1m36s
rmmod dummy -> 0.4s
Benchmark after:
make-dummies 0 999 -> 0.63s
rmmod dummy -> 0.12s
make-dummies 0 9999 -> 2m35s
rmmod dummy -> 18s
The slowdown is caused by the lookups used in insert_headers
and put_links to see if we need to add links or remove links.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
When there are errors it is very nice to know the full sysctl path.
Add a simple function that computes the sysctl path and prints it
out.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Simplify the code and the sysctl semantics by autogenerating
sysctl directories when a sysctl table is registered that needs
the directories and autodeleting the directories when there are
no more sysctl tables registered that need them.
Autogenerating directories keeps sysctl tables from depending
on each other, removing all of the arcane register/unregister
ordering constraints and makes it impossible to get the order
wrong when reigsering and unregistering sysctl tables.
Autogenerating directories yields one unique entity that dentries
can point to, retaining the current effective use of the dcache.
Add struct ctl_dir as the type of these new autogenerated
directories.
The attached_by and attached_to fields in ctl_table_header are
removed as they are no longer needed.
The child field in ctl_table is no longer needed by the core of
the sysctl code. ctl_table.child can be removed once all of the
existing users have been updated.
Benchmark before:
make-dummies 0 999 -> 0.7s
rmmod dummy -> 0.07s
make-dummies 0 9999 -> 1m10s
rmmod dummy -> 0.4s
Benchmark after:
make-dummies 0 999 -> 0.44s
rmmod dummy -> 0.065s
make-dummies 0 9999 -> 1m36s
rmmod dummy -> 0.4s
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Add a ctl_table_root pointer to ctl_table set so it is easy to
go from a ctl_table_set to a ctl_table_root.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Replace sysctl_head_next with first_entry and next_entry. These new
iterators operate at the level of sysctl table entries and filter
out any sysctl tables that should not be shown.
Utilizing two specialized functions instead of a single function removes
conditionals for handling awkward special cases that only come up
at the beginning of iteration, making the iterators easier to read
and understand.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Replace the helpers that proc_sys_lookup uses with helpers that work
in terms of an entire sysctl directory. This is worse for sysctl_lock
hold times but it is much better for code clarity and the code cleanups
to come.
find_in_table is no longer needed so it is removed.
find_entry a general helper to find entries in a directory is added.
lookup_entry is a simple wrapper around find_entry that takes the
sysctl_lock increases the use count if an entry is found and drops
the sysctl_lock.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Every other directory has a .child member and we look at the .child
for our entries. Do the same for the root_table.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Factor out a routing to initialize the sysctl_table_header.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Add nreg to ctl_table_header. When nreg drops to 0 the ctl_table_header
will be unregistered.
Factor out drop_sysctl_table from unregister_sysctl_table, and add
the logic for decrementing nreg.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Instead of relying on sysct_head_next(NULL) to magically
return the right header for the root directory instead
explicitly transform NULL into the root directories header.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
While useful at one time for selinux and the sysctl sanity
checks those users no longer use the parent field and we can
safely remove it.
Inspired-by: Lucian Adrian Grijincu <lucian.grijincu@gmil.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
- Stop validating subdirectories now that we only register leaf tables
- Cleanup and improve the duplicate filename check.
* Run the duplicate filename check under the sysctl_lock to guarantee
we never add duplicate names.
* Reduce the duplicate filename check to nearly O(M*N) where M is the
number of entries in tthe table we are registering and N is the
number of entries in the directory before we got there.
- Move the duplicate filename check into it's own function and call
it directtly from __register_sysctl_table
- Kill the config option as the sanity checks are now cheap enough
the config option is unnecessary. The original reason for the config
option was because we had a huge table used to verify the proc filename
to binary sysctl mapping. That table has now evolved into the binary_sysctl
translation layer and is no longer part of the sysctl_check code.
- Tighten up the permission checks. Guarnateeing that files only have read
or write permissions.
- Removed redudant check for parents having a procname as now everything has
a procname.
- Generalize the backtrace logic so that we print a backtrace from
any failure of __register_sysctl_table that was not caused by
a memmory allocation failure. The backtrace allows us to track
down who erroneously registered a sysctl table.
Bechmark before (CONFIG_SYSCTL_CHECK=y):
make-dummies 0 999 -> 12s
rmmod dummy -> 0.08s
Bechmark before (CONFIG_SYSCTL_CHECK=n):
make-dummies 0 999 -> 0.7s
rmmod dummy -> 0.06s
make-dummies 0 99999 -> 1m13s
rmmod dummy -> 0.38s
Benchmark after:
make-dummies 0 999 -> 0.65s
rmmod dummy -> 0.055s
make-dummies 0 9999 -> 1m10s
rmmod dummy -> 0.39s
The sysctl sanity checks now impose no measurable cost.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Split the registration of a complex ctl_table array which may have
arbitrary numbers of directories (->child != NULL) and tables of files
into a series of simpler registrations that only register tables of files.
Graphically:
register('dir', { + file-a
+ file-b
+ subdir1
+ file-c
+ subdir2
+ file-d
+ file-e })
is transformed into:
wrapper->subheaders[0] = register('dir', {file1-a, file1-b})
wrapper->subheaders[1] = register('dir/subdir1', {file-c})
wrapper->subheaders[2] = register('dir/subdir2', {file-d, file-e})
return wrapper
This guarantees that __register_sysctl_table will only see a simple
ctl_table array with all entries having (->child == NULL).
Care was taken to pass the original simple ctl_table arrays to
__register_sysctl_table whenever possible.
This change is derived from a similar patch written
by Lucrian Grijincu.
Inspired-by: Lucian Adrian Grijincu <lucian.grijincu@gmail.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
For any component of table passed to __register_sysctl_paths
that actually serves as a path, add that to the cstring path
that is passed to __register_sysctl_table.
The result is that for most calls to __register_sysctl_paths
we only pass a table to __register_sysctl_table that contains
no child directories.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Make __register_sysctl_table the core sysctl registration operation and
make it take a char * string as path.
Now that binary paths have been banished into the real of backwards
compatibility in kernel/binary_sysctl.c where they can be safely
ignored there is no longer a need to use struct ctl_path to represent
path names when registering ctl_tables.
Start the transition to using normal char * strings to represent
pathnames when registering sysctl tables. Normal strings are easier
to deal with both in the internal sysctl implementation and for
programmers registering sysctl tables.
__register_sysctl_paths is turned into a backwards compatibility wrapper
that converts a ctl_path array into a normal char * string.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Creating local copies of directory names is a good idea for
two reasons.
- The dynamic names used by callers must be copied into new
strings by the callers today to ensure the strings do not
change between register and unregister of the sysctl table.
- Sysctl directories have a potentially different lifetime
than the time between register and unregister of any
particular sysctl table.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
In sysctl_net register the two networking roots in the proper order.
In register_sysctl walk the sysctl sets in the reverse order of the
sysctl roots.
Remove parent from ctl_table_set and setup_sysctl_set as it is no
longer needed.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
This adds a small helper retire_sysctl_set to remove the intimate knowledge about
the how a sysctl_set is implemented from net/sysct_net.c
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
I goofed when I made sysctl directories have nlink == 0.
nlink == 0 means the directory has been deleted.
nlink == 1 meands a directory does not count subdirectories.
Use the default nlink == 1 for sysctl directories.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Move the core sysctl code from kernel/sysctl.c and kernel/sysctl_check.c
into fs/proc/proc_sysctl.c.
Currently sysctl maintenance is hampered by the sysctl implementation
being split across 3 files with artificial layering between them.
Consolidate the entire sysctl implementation into 1 file so that
it is easier to see what is going on and hopefully allowing for
simpler maintenance.
For functions that are now only used in fs/proc/proc_sysctl.c remove
their declarations from sysctl.h and make them static in fs/proc/proc_sysctl.c
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Simplify the code by treating the base sysctl table like any other
sysctl table and register it with register_sysctl_table.
To ensure this table is registered early enough to avoid problems
call sysctl_init from proc_sys_init.
Rename sysctl_net.c:sysctl_init() to net_sysctl_init() to avoid
name conflicts now that kernel/sysctl.c:sysctl_init() is no longer
static.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Remove checks for conditions that will never happen. If procname is NULL
the loop would already had bailed out, so there's no need to check it
again.
At the same time this also compacts the function find_in_table() by
refactoring it to be easier to read.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
/proc/pid/clear_refs is used to clear the Referenced and YOUNG bits for
pages and corresponding page table entries of the task with PID pid, which
includes any special mappings inserted into the page tables in order to
provide things like vDSOs and user helper functions.
On ARM this causes a problem because the vectors page is mapped as a
global mapping and since ec706dab ("ARM: add a vma entry for the user
accessible vector page"), a VMA is also inserted into each task for this
page to aid unwinding through signals and syscall restarts. Since the
vectors page is required for handling faults, clearing the YOUNG bit (and
subsequently writing a faulting pte) means that we lose the vectors page
*globally* and cannot fault it back in. This results in a system deadlock
on the next exception.
To see this problem in action, just run:
$ echo 1 > /proc/self/clear_refs
on an ARM platform (as any user) and watch your system hang. I think this
has been the case since 2.6.37
This patch avoids clearing the aforementioned bits for reserved pages,
therefore leaving the vectors page intact on ARM. Since reserved pages
are not candidates for swap, this change should not have any impact on the
usefulness of clear_refs.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Reported-by: Moussa Ba <moussaba@micron.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Acked-by: Nicolas Pitre <nico@linaro.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: <stable@vger.kernel.org> [2.6.37+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/accounting, proc: Fix /proc/stat interrupts sum
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracepoints/module: Fix disabling tracepoints with taint CRAP or OOT
x86/kprobes: Add arch/x86/tools/insn_sanity to .gitignore
x86/kprobes: Fix typo transferred from Intel manual
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits
x86, tsc: Fix SMI induced variation in quick_pit_calibrate()
x86, opcode: ANDN and Group 17 in x86-opcode-map.txt
x86/kconfig: Move the ZONE_DMA entry under a menu
x86/UV2: Add accounting for BAU strong nacks
x86/UV2: Ack BAU interrupt earlier
x86/UV2: Remove stale no-resources test for UV2 BAU
x86/UV2: Work around BAU bug
x86/UV2: Fix BAU destination timeout initialization
x86/UV2: Fix new UV2 hardware by using native UV2 broadcast mode
x86: Get rid of dubious one-bit signed bitfield
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit: (29 commits)
audit: no leading space in audit_log_d_path prefix
audit: treat s_id as an untrusted string
audit: fix signedness bug in audit_log_execve_info()
audit: comparison on interprocess fields
audit: implement all object interfield comparisons
audit: allow interfield comparison between gid and ogid
audit: complex interfield comparison helper
audit: allow interfield comparison in audit rules
Kernel: Audit Support For The ARM Platform
audit: do not call audit_getname on error
audit: only allow tasks to set their loginuid if it is -1
audit: remove task argument to audit_set_loginuid
audit: allow audit matching on inode gid
audit: allow matching on obj_uid
audit: remove audit_finish_fork as it can't be called
audit: reject entry,always rules
audit: inline audit_free to simplify the look of generic code
audit: drop audit_set_macxattr as it doesn't do anything
audit: inline checks for not needing to collect aux records
audit: drop some potentially inadvisable likely notations
...
Use evil merge to fix up grammar mistakes in Kconfig file.
Bad speling and horrible grammar (and copious swearing) is to be
expected, but let's keep it to commit messages and comments, rather than
expose it to users in config help texts or printouts.
|
|
Jüri Aedla reported that the /proc/<pid>/mem handling really isn't very
robust, and it also doesn't match the permission checking of any of the
other related files.
This changes it to do the permission checks at open time, and instead of
tracking the process, it tracks the VM at the time of the open. That
simplifies the code a lot, but does mean that if you hold the file
descriptor open over an execve(), you'll continue to read from the _old_
VM.
That is different from our previous behavior, but much simpler. If
somebody actually finds a load where this matters, we'll need to revert
this commit.
I suspect that nobody will ever notice - because the process mapping
addresses will also have changed as part of the execve. So you cannot
actually usefully access the fd across a VM change simply because all
the offsets for IO would have changed too.
Reported-by: Jüri Aedla <asd@ut.ee>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
At the moment we allow tasks to set their loginuid if they have
CAP_AUDIT_CONTROL. In reality we want tasks to set the loginuid when they
log in and it be impossible to ever reset. We had to make it mutable even
after it was once set (with the CAP) because on update and admin might have
to restart sshd. Now sshd would get his loginuid and the next user which
logged in using ssh would not be able to set his loginuid.
Systemd has changed how userspace works and allowed us to make the kernel
work the way it should. With systemd users (even admins) are not supposed
to restart services directly. The system will restart the service for
them. Thus since systemd is going to loginuid==-1, sshd would get -1, and
sshd would be allowed to set a new loginuid without special permissions.
If an admin in this system were to manually start an sshd he is inserting
himself into the system chain of trust and thus, logically, it's his
loginuid that should be used! Since we have old systems I make this a
Kconfig option.
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
The function always deals with current. Don't expose an option
pretending one can use it for something. You can't.
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
Commit 3292beb340c7688 ("sched/accounting: Change cpustat fields to an array")
deleted the code which provides us with the sum of all interrupts in the
system, causing vmstat to report zero interrupts occuring in the system.
Fix this by restoring the code.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> # [on ARM]
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Glauber Costa <glommer@parallels.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Tuner <pjt@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
* 'for-linus' of git://selinuxproject.org/~jmorris/linux-security:
capabilities: remove __cap_full_set definition
security: remove the security_netlink_recv hook as it is equivalent to capable()
ptrace: do not audit capability check when outputing /proc/pid/stat
capabilities: remove task_ns_* functions
capabitlies: ns_capable can use the cap helpers rather than lsm call
capabilities: style only - move capable below ns_capable
capabilites: introduce new has_ns_capabilities_noaudit
capabilities: call has_ns_capability from has_capability
capabilities: remove all _real_ interfaces
capabilities: introduce security_capable_noaudit
capabilities: reverse arguments to security_capable
capabilities: remove the task from capable LSM hook entirely
selinux: sparse fix: fix several warnings in the security server cod
selinux: sparse fix: fix warnings in netlink code
selinux: sparse fix: eliminate warnings for selinuxfs
selinux: sparse fix: declare selinux_disable() in security.h
selinux: sparse fix: move selinux_complete_init
selinux: sparse fix: make selinux_secmark_refcount static
SELinux: Fix RCU deref check warning in sel_netport_insert()
Manually fix up a semantic mis-merge wrt security_netlink_recv():
- the interface was removed in commit fd7784615248 ("security: remove
the security_netlink_recv hook as it is equivalent to capable()")
- a new user of it appeared in commit a38f7907b926 ("crypto: Add
userspace configuration API")
causing no automatic merge conflict, but Eric Paris pointed out the
issue.
|
|
The mm->start_code/end_code, mm->start_data/end_data, mm->start_brk are
involved into calculation of program text/data segment sizes (which might
be seen in /proc/<pid>/statm) and into brk() call final address.
For restore we need to know all these values. While
mm->start_code/end_code already present in /proc/$pid/stat, the rest
members are not, so this patch brings them in.
The restore procedure of these members is addressed in another patch using
prctl().
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
get_proc_task() can fail to search the task and return NULL,
put_task_struct() will then bomb the kernel with following oops:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
IP: [<ffffffff81217d34>] proc_pid_permission+0x64/0xe0
PGD 112075067 PUD 112814067 PMD 0
Oops: 0002 [#1] PREEMPT SMP
This is a regression introduced by commit 0499680a ("procfs: add hidepid=
and gid= mount options"). The kernel should return -ESRCH if
get_proc_task() failed.
Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Stephen Wilson <wilsons@start.ca>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add support for mount options to restrict access to /proc/PID/
directories. The default backward-compatible "relaxed" behaviour is left
untouched.
The first mount option is called "hidepid" and its value defines how much
info about processes we want to be available for non-owners:
hidepid=0 (default) means the old behavior - anybody may read all
world-readable /proc/PID/* files.
hidepid=1 means users may not access any /proc/<pid>/ directories, but
their own. Sensitive files like cmdline, sched*, status are now protected
against other users. As permission checking done in proc_pid_permission()
and files' permissions are left untouched, programs expecting specific
files' modes are not confused.
hidepid=2 means hidepid=1 plus all /proc/PID/ will be invisible to other
users. It doesn't mean that it hides whether a process exists (it can be
learned by other means, e.g. by kill -0 $PID), but it hides process' euid
and egid. It compicates intruder's task of gathering info about running
processes, whether some daemon runs with elevated privileges, whether
another user runs some sensitive program, whether other users run any
program at all, etc.
gid=XXX defines a group that will be able to gather all processes' info
(as in hidepid=0 mode). This group should be used instead of putting
nonroot user in sudoers file or something. However, untrusted users (like
daemons, etc.) which are not supposed to monitor the tasks in the whole
system should not be added to the group.
hidepid=1 or higher is designed to restrict access to procfs files, which
might reveal some sensitive private information like precise keystrokes
timings:
http://www.openwall.com/lists/oss-security/2011/11/05/3
hidepid=1/2 doesn't break monitoring userspace tools. ps, top, pgrep, and
conky gracefully handle EPERM/ENOENT and behave as if the current user is
the only user running processes. pstree shows the process subtree which
contains "pstree" process.
Note: the patch doesn't deal with setuid/setgid issues of keeping
preopened descriptors of procfs files (like
https://lkml.org/lkml/2011/2/7/368). We rely on that the leaked
information like the scheduling counters of setuid apps doesn't threaten
anybody's privacy - only the user started the setuid program may read the
counters.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg KH <greg@kroah.com>
Cc: Theodore Tso <tytso@MIT.EDU>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: James Morris <jmorris@namei.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add support for procfs mount options. Actual mount options are coming in
the next patches.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg KH <greg@kroah.com>
Cc: Theodore Tso <tytso@MIT.EDU>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: James Morris <jmorris@namei.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This one behaves similarly to the /proc/<pid>/fd/ one - it contains
symlinks one for each mapping with file, the name of a symlink is
"vma->vm_start-vma->vm_end", the target is the file. Opening a symlink
results in a file that point exactly to the same inode as them vma's one.
For example the ls -l of some arbitrary /proc/<pid>/map_files/
| lr-x------ 1 root root 64 Aug 26 06:40 7f8f80403000-7f8f80404000 -> /lib64/libc-2.5.so
| lr-x------ 1 root root 64 Aug 26 06:40 7f8f8061e000-7f8f80620000 -> /lib64/libselinux.so.1
| lr-x------ 1 root root 64 Aug 26 06:40 7f8f80826000-7f8f80827000 -> /lib64/libacl.so.1.1.0
| lr-x------ 1 root root 64 Aug 26 06:40 7f8f80a2f000-7f8f80a30000 -> /lib64/librt-2.5.so
| lr-x------ 1 root root 64 Aug 26 06:40 7f8f80a30000-7f8f80a4c000 -> /lib64/ld-2.5.so
This *helps* checkpointing process in three ways:
1. When dumping a task mappings we do know exact file that is mapped
by particular region. We do this by opening
/proc/$pid/map_files/$address symlink the way we do with file
descriptors.
2. This also helps in determining which anonymous shared mappings are
shared with each other by comparing the inodes of them.
3. When restoring a set of processes in case two of them has a mapping
shared, we map the memory by the 1st one and then open its
/proc/$pid/map_files/$address file and map it by the 2nd task.
Using /proc/$pid/maps for this is quite inconvenient since it brings
repeatable re-reading and reparsing for this text file which slows down
restore procedure significantly. Also as being pointed in (3) it is a way
easier to use top level shared mapping in children as
/proc/$pid/map_files/$address when needed.
[akpm@linux-foundation.org: coding-style fixes]
[gorcunov@openvz.org: make map_files depend on CHECKPOINT_RESTORE]
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Reviewed-by: Vasiliy Kulikov <segoon@openwall.com>
Reviewed-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Tejun Heo <tj@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Prepare the ground for the next "map_files" patch which needs a name of a
link file to analyse.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
