summaryrefslogtreecommitdiff
path: root/fs/gfs2
AgeCommit message (Collapse)AuthorFilesLines
2008-02-05Pagecache zeroing: zero_user_segment, zero_user_segments and zero_userChristoph Lameter2-2/+2
Simplify page cache zeroing of segments of pages through 3 functions zero_user_segments(page, start1, end1, start2, end2) Zeros two segments of the page. It takes the position where to start and end the zeroing which avoids length calculations and makes code clearer. zero_user_segment(page, start, end) Same for a single segment. zero_user(page, start, length) Length variant for the case where we know the length. We remove the zero_user_page macro. Issues: 1. Its a macro. Inline functions are preferable. 2. The KM_USER0 macro is only defined for HIGHMEM. Having to treat this special case everywhere makes the code needlessly complex. The parameter for zeroing is always KM_USER0 except in one single case that we open code. Avoiding KM_USER0 makes a lot of code not having to be dealing with the special casing for HIGHMEM anymore. Dealing with kmap is only necessary for HIGHMEM configurations. In those configurations we use KM_USER0 like we do for a series of other functions defined in highmem.h. Since KM_USER0 is depends on HIGHMEM the existing zero_user_page function could not be a macro. zero_user_* functions introduced here can be be inline because that constant is not used when these functions are called. Also extract the flushing of the caches to be outside of the kmap. [akpm@linux-foundation.org: fix nfs and ntfs build] [akpm@linux-foundation.org: fix ntfs build some more] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-03fs/: Spelling fixesJoe Perches1-1/+1
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmwLinus Torvalds40-1109/+1092
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (56 commits) [GFS2] Allow journal recovery on read-only mount [GFS2] Lockup on error [GFS2] Fix page_mkwrite truncation race path [GFS2] Fix typo [GFS2] Fix write alloc required shortcut calculation [GFS2] gfs2_alloc_required performance [GFS2] Remove unneeded i_spin [GFS2] Reduce inode size by moving i_alloc out of line [GFS2] Fix assert in log code [GFS2] Fix problems relating to execution of files on GFS2 [GFS2] Initialize extent_list earlier [GFS2] Allow page migration for writeback and ordered pages [GFS2] Remove unused variable [GFS2] Fix log block mapper [GFS2] Minor correction [GFS2] Eliminate the no longer needed sd_statfs_mutex [GFS2] Incremental patch to fix compiler warning [GFS2] Function meta_read optimization [GFS2] Only fetch the dinode once in block_map [GFS2] Reorganize function gfs2_glmutex_lock ...
2008-01-25[GFS2] Allow journal recovery on read-only mountAbhijith Das1-4/+12
This patch allows gfs2 to perform journal recovery even if it is mounted read-only. Strictly speaking, a read-only mount should not be writing to the filesystem, but we do this only to perform journal recovery. A read-only mount will fail if we don't recover the dirty journal. Also, when gfs2 is used as a root filesystem, it will be mounted read-only before being mounted read-write during the boot sequence. A failed read-only mount will panic the machine during bootup. Signed-off-by: Abhijith Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Lockup on errorBob Peterson1-1/+1
I spotted this bug while I was digging around. Looks like it could cause a lockup in some rare error condition. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Fix page_mkwrite truncation race pathSteven Whitehouse1-0/+1
There was a bug in the truncation/invalidation race path for ->page_mkwrite for gfs2. It ought to return 0 so that the effect is the same as if the page was truncated at any of the other points at which the page_lock is dropped. This will result in the restart of the whole page fault path. If it was due to a real truncation (as opposed to an invalidate because we let a glock go) then the ->fault path will pick that up when it gets called again. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Fix typoBob Peterson1-1/+1
This patch fixes a minor typo. Surprisingly, it still compiled. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Fix write alloc required shortcut calculationSteven Whitehouse1-2/+2
The comparison was being made against the wrong quantity. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] gfs2_alloc_required performanceBob Peterson1-0/+5
This is a small I/O performance enhancement to gfs2. (Actually, it is a rework of an earlier version I got wrong). The idea here is to check if the write extends past the last block in the file. If so, the function can save itself a lot of time and trouble because it knows an allocate will be required. Benchmarks like iozone should see better performance. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove unneeded i_spinBob Peterson2-2/+0
This patch removes a vestigial variable "i_spin" from the gfs2_inode structure. This not only saves us memory (>300000 of these in memory for the oom test) it also saves us time because we don't have to spend time initializing it (i.e. slightly better performance). Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Reduce inode size by moving i_alloc out of lineSteven Whitehouse12-36/+39
It is possible to reduce the size of GFS2 inodes by taking the i_alloc structure out of the gfs2_inode. This patch allocates the i_alloc structure whenever its needed, and frees it afterward. This decreases the amount of low memory we use at the expense of requiring a memory allocation for each page or partial page that we write. A quick test with postmark shows that the overhead is not measurable and I also note that OCFS2 use the same approach. In the future I'd like to solve the problem by shrinking down the size of the members of the i_alloc structure, but for now, this reduces the immediate problem of using too much low-memory on x86 and doesn't add too much overhead. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Fix assert in log codeSteven Whitehouse1-7/+4
Although the values were all being calculated correctly, there was a race in the assert due to the way it was using atomic variables. This changes the value we assert on so that we get the same effect by testing a different variable. This prevents the assert triggering when it shouldn't. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Fix problems relating to execution of files on GFS2Steven Whitehouse2-9/+16
This patch fixes a couple of problems which affected the execution of files on GFS2. The first is that there was a corner case where inodes were not always uptodate at the point at which permissions checks were being carried out, this was resulting in refusal of execute permission, but only on the first lookup, subsequent requests worked correctly. The second was a problem relating to incorrect updating of file sizes which was introduced with the write_begin/end code for GFS2 a little while back. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Abhijith Das <adas@redhat.com>
2008-01-25[GFS2] Initialize extent_list earlierBob Peterson2-1/+1
Here is a patch for the latest upstream GFS2 code: The journal extent map needs to be initialized sooner than it currently is. Otherwise failed mount attempts (e.g. not enough journals, etc.) may panic trying to access the uninitialized list. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Allow page migration for writeback and ordered pagesSteven Whitehouse1-0/+2
To improve performance on NUMA, we use the VM's standard page migration for writeback and ordered pages. Probably we could also do the same for journaled data, but that would need a careful audit of the code, so will be the subject of a later patch. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove unused variableSteven Whitehouse1-1/+0
The go_drop_th function is never called or referenced. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Fix log block mapperSteven Whitehouse1-1/+1
A missing offset in the calculation. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Minor correctionBob Peterson1-1/+1
This is a small correction to my previously posted patch1. It just changes a divide to a shift. It's faster and doesn't introduce odd dependencies on 32-bit compiles. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Eliminate the no longer needed sd_statfs_mutexBob Peterson3-6/+0
This patch eliminates the unneeded sd_statfs_mutex mutex but preserves the ordering as discussed. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Incremental patch to fix compiler warningBob Peterson1-5/+2
Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Function meta_read optimizationBob Peterson1-6/+7
This patch optimizes function gfs2_meta_read. Basically, gfs2_meta_wait was being called regardless of whether a disk read was requested. This just pulls that wait into the if that triggers the read. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Only fetch the dinode once in block_mapBob Peterson1-7/+7
Function gfs2_block_map was often looking up the disk inode twice. This optimizes it so that only does it once. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Reorganize function gfs2_glmutex_lockBob Peterson1-14/+9
This patch optimizes the function gfs2_glmutex_lock. The basic theory is: Why bother initializing a holder, setting up wait bits and then waiting on them, if you know the glock can be yours. So the holder stuff is placed inside the if checking if the glock is locked. This one needs careful scrutiny because changing anything to do with locking should strike terror into one's heart. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Run through full bitmaps quicker in gfs2_bitfitBob Peterson1-25/+29
I eliminated the passing of an unused parameter into gfs2_bitfit called rgd. This also changes the gfs2_bitfit code that searches for free (or used) blocks. Before, the code was trying to check for bytes that indicated 4 blocks in the undesired state. The problem is, it was spending more time trying to do this than it actually was saving. This version only optimizes the case where we're looking for free blocks, and it checks a machine word at a time. So on 32-bit machines, it will check 32-bits (16 blocks) and on 64-bit machines, it will check 64-bits (32 blocks) at a time. The compiler optimizes that quite well and we save some time, especially when running through full bitmaps (like the bitmaps allocated for the journals). There's probably a more elegant or optimized way to do this, but I haven't thought of it yet. I'm open to suggestions. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Get rid of useless "found" variable in quota.cBob Peterson1-4/+2
This just eliminates an unused variable from the quota code. Not likely to be a time saver. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Journal extent mappingBob Peterson4-17/+97
This patch saves a little time when gfs2 writes to the journals by keeping a mapping between logical and physical blocks on disk. That's better than constantly looking up indirect pointers in buffers, when the journals are several levels of indirection (which they typically are). Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove function gfs2_get_blockBob Peterson8-35/+17
This patch is just a cleanup. Function gfs2_get_block() just calls function gfs2_block_map reversing the last two parameters. By reversing the parameters, gfs2_block_map() may be called directly and function gfs2_get_block may be eliminated altogether. Since this function is done for every block operation, this streamlines the code and makes it a little bit more efficient. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] use pid for plock owner for nfs clientsDavid Teigland1-4/+14
The fl_owner is that of lockd when posix locks arrive from nfs clients, so it can't be used to distinguish between lock holders. Use fl_pid as owner instead; it's the pid of the process on the nfs client. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove unused variableSteven Whitehouse1-1/+0
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] patch to check for recursive lock requests in gfs2_rename code pathAbhijith Das1-8/+25
A certain scenario in the rename code path triggers a kernel BUG() because it accidentally does recursive locking The first lock is requested to unlink an already existing inode (replacing a file) and the second lock is requested when the destination directory needs to alloc some space. It is rare that these two events happen during the same rename call, and even more rare that these two instances try to lock the same rgrp. It is, however, possible. https://bugzilla.redhat.com/show_bug.cgi?id=404711 Signed-off-by: Abhijith Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove lock methods for lock_nolock protocolWendy Cheng3-14/+35
GFS2 supports two modes of locking - lock_nolock for single node filesystem and lock_dlm for cluster mode locking. The gfs2 lock methods are removed from file operation table for lock_nolock protocol. This would allow VFS to handle posix lock and flock logics just like other in-tree filesystems without duplication. Signed-off-by: S. Wendy Cheng <wcheng@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove unrequired codeFabio M. Di Nitto1-36/+6
Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Fix build warningsFabio Massimo Di Nitto1-12/+0
Hi Steven, Steven Whitehouse wrote: > Hi, > > Now in the -nmw git tree. Thanks, > > Steve. > > On Wed, 2007-11-21 at 11:54 -0600, Ryan O'Hara wrote: this patch introduces a bunch of build warnings by leaving around struct inode *inode = &ip->i_inode; The patch in attachment cleans them up. Please apply. Signed-off-by: Fabio Massimo Di Nitto <fabbione@ubuntu.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] remove unnecessary permission checksRyan O'Hara1-30/+0
Remove read/write permission() checks from xattr operations. VFS layer is already handling permission for xattrs via the xattr_permission() call, so there is no need for gfs2 to check permissions. Futhermore, using permission() for SELinux xattrs ops is incorrect. Signed-off-by: Ryan O'Hara <rohara@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Fix runtime issue with UP kernelsFabio Massimo Di Nitto2-5/+0
The issue is indeed UP vs SMP and it is totally random. spin_is_locked() is a bad assertion because there is no correct answer on UP. on UP spin_is_locked() has to return either one value or another, always. This means that in my setup I am lucky enough to trigger the issue and your you are lucky enough not to. the patch in attachment removes the bogus calls to BUG_ON and according to David (in CC and thanks for the long explanation on the problem) we can rely upon things like lockdep to find problem that might be trying to catch. Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] tidy up error messageDavid Teigland1-2/+1
Print error with log_error() to be consistent with others. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Check for installation of mount helpers for DLM mountsFabio Massimo Di Nitto1-0/+6
The patch is a fix to abort mount if the mount.gfs* and possible umount.* are missing from /sbin. While we do what we can to guarantee that they are installed properly in userland (CVS HEAD), we want to make sure that mount still aborts properly. The only sign of missing helpers is that lock_dlm will receive no mount options at all. According to David the problem does not exist for lock_nolock as the helpers are not required. The patch has been tested for both gfs and gfs2 and it works as expected. The lack of mount.gfs* will generate an error that is propagated to mount: oot@node1:~# mount -t gfs2 /dev/nbd2 /mnt/ mount: wrong fs type, bad option, bad superblock on /dev/nbd2, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so [ 3513.303346] GFS2: fsid=: Trying to join cluster "lock_dlm", "gutsy:gfs2" [ 3513.304546] DLM/GFS2/GFS ERROR: (u)mount helpers are not installed properly! [ 3513.306290] GFS2: fsid=: can't mount proto=lock_dlm, table=gutsy:gfs2, hostdata= You might want to notice that it will also avoid mount to hang or fail silently or with strange errors that will require the cluster to reboot/restart before you can actually mount the filesystem again. Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Don't periodically update the jindexSteven Whitehouse4-17/+0
We only care about the content of the jindex in two cases, one is when we mount the fs and the other is when we need to recover another journal. In both cases we have to update the jindex anyway, so there is no point in updating it periodically between times, so this removes it to simplify gfs2_logd. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Move gfs2_logd into log.cSteven Whitehouse4-54/+56
This means that we can mark gfs2_ail1_empty static and prepares the way for further changes. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Use atomic_t for journal free blocks counterSteven Whitehouse3-16/+16
This patch changes the counter which keeps track of the free blocks in the journal to an atomic_t in preparation for the following patch which will update the log reservation code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Don't add glocks to the journalSteven Whitehouse9-78/+21
The only reason for adding glocks to the journal was to keep track of which locks required a log flush prior to release. We add a flag to the glock to allow this check to be made in a simpler way. This reduces the size of a glock (by 12 bytes on i386, 24 on x86_64) and means that we can avoid extra work during the journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] check kthread_should_stop when waitingDavid Teigland1-7/+2
Use wait_event_interruptible() in the lock_dlm thread instead of an open coded equivalent, and include a kthread_should_stop() check in the wait test so we don't miss a kthread_stop(). Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Given device ID rather than s_id in "id" sysfs fileBob Peterson1-1/+2
This patch changes the /sys/fs/gfs2/<s_id>/id file to give the device id "major:minor" rather than the s_id. That enables gfs2_tool to match devices properly (by id, not name) when locating the tuning files. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove flags no longer requiredSteven Whitehouse2-19/+2
The HIF_MUTEX and HIF_PROMOTE flags were set on the glock holders depending upon which of the two waiters lists they were going to be queued upon. They were then tested when the holders were taken off the lists to ensure that the right type of holder was being dequeued. Since we are already using separate lists, there doesn't seem a lot of point having these flags as well, and since setting them and testing them is in the fast path for locking and unlocking glock, this patch removes them. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Reorder writeback for glock syncSteven Whitehouse2-71/+22
Previously we were doing (write data, wait for data, write metadata, wait for metadata). After this patch we so (write metadata, write data, wait for data, wait for metadata) which should be more efficient. Also I noticed that the drop_bh and xmote_bh functions were almost identical. In fact the only difference was a single test, and that test is such that in the drop_bh case, it would always evaluate to the correct result. As such we can use the xmote_bh functions in all the places where we were using the drop_bh function and remove the drop_bh functions. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Add sync_page to metadata address space operationsSteven Whitehouse1-0/+1
This set of address space operations was missing a sync_page operation. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove "reclaim limit"Steven Whitehouse4-13/+0
This call to reclaim glocks is not needed, and in particular we don't want it in the fast path for locking glocks. The limit was entirely arbitrary anyway and we can't expect users to adjust things like this, the remaining code will do the right thing on its own. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove unused variablesSteven Whitehouse2-8/+0
These haven't been used for some time, remove them. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Use correct include file in ops_address.cSteven Whitehouse1-1/+1
Something changed in the upstream kernel, and it needs this one-liner to allow ops_address.c to build. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Don't hold page lock when starting transactionSteven Whitehouse1-26/+25
This is an addendum to the new AOPs work which moves the point at which we take the page lock so that we don't get it until the last possible moment. This resolves a conflict between starting transactions and the page lock. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>