| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 8f9ff189205a6817aee5a1f996f876541f86e07c upstream.
When using FITRIM ioctl on a file system without journal it will
only trim the block group once, no matter how many times you invoke
FITRIM ioctl and how many block you release from the block group.
It is because we only clear EXT4_GROUP_INFO_WAS_TRIMMED_BIT in journal
callback. Fix this by clearing the bit in no journal mode as well.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Jorge Fábregas <jorge.fabregas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f5a44db5d2d677dfbf12deee461f85e9ec633961 upstream.
The missing casts can cause the high 64-bits of the physical blocks to
be lost. Set up new macros which allows us to make sure the right
thing happen, even if at some point we end up supporting larger
logical block numbers.
Thanks to the Emese Revfy and the PaX security team for reporting this
issue.
Reported-by: PaX Team <pageexec@freemail.hu>
Reported-by: Emese Revfy <re.emese@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4e8d2139802ce4f41936a687f06c560b12115247 upstream.
ext4_mb_put_pa should hold pa->pa_lock before accessing pa->pa_count.
While ext4_mb_use_preallocated checks pa->pa_deleted first and then
increments pa->count later, ext4_mb_put_pa decrements pa->pa_count
before holding pa->pa_lock and then sets pa->pa_deleted.
* Free sequence
ext4_mb_put_pa (1): atomic_dec_and_test pa->pa_count
ext4_mb_put_pa (2): lock pa->pa_lock
ext4_mb_put_pa (3): check pa->pa_deleted
ext4_mb_put_pa (4): set pa->pa_deleted=1
ext4_mb_put_pa (5): unlock pa->pa_lock
ext4_mb_put_pa (6): remove pa from a list
ext4_mb_pa_callback: free pa
* Use sequence
ext4_mb_use_preallocated (1): iterate over preallocation
ext4_mb_use_preallocated (2): lock pa->pa_lock
ext4_mb_use_preallocated (3): check pa->pa_deleted
ext4_mb_use_preallocated (4): increase pa->pa_count
ext4_mb_use_preallocated (5): unlock pa->pa_lock
ext4_mb_release_context: access pa
* Use-after-free sequence
[initial status] <pa->pa_deleted = 0, pa_count = 1>
ext4_mb_use_preallocated (1): iterate over preallocation
ext4_mb_use_preallocated (2): lock pa->pa_lock
ext4_mb_use_preallocated (3): check pa->pa_deleted
ext4_mb_put_pa (1): atomic_dec_and_test pa->pa_count
[pa_count decremented] <pa->pa_deleted = 0, pa_count = 0>
ext4_mb_use_preallocated (4): increase pa->pa_count
[pa_count incremented] <pa->pa_deleted = 0, pa_count = 1>
ext4_mb_use_preallocated (5): unlock pa->pa_lock
ext4_mb_put_pa (2): lock pa->pa_lock
ext4_mb_put_pa (3): check pa->pa_deleted
ext4_mb_put_pa (4): set pa->pa_deleted=1
[race condition!] <pa->pa_deleted = 1, pa_count = 1>
ext4_mb_put_pa (5): unlock pa->pa_lock
ext4_mb_put_pa (6): remove pa from a list
ext4_mb_pa_callback: free pa
ext4_mb_release_context: access pa
AddressSanitizer has detected use-after-free in ext4_mb_new_blocks
Bug report: http://goo.gl/rG1On3
Signed-off-by: Junho Ryu <jayr@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e7676a704ee0a1ef71a6b23760b5a8f6896cb1a1 upstream.
The filesystem should not be marked inconsistent if ext4_free_blocks()
is not able to allocate memory. Unfortunately some callers (most
notably ext4_truncate) don't have a way to reflect an error back up to
the VFS. And even if we did, most userspace applications won't deal
with most system calls returning ENOMEM anyway.
Reported-by: Nagachandra P <nagachandra@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 update from Ted Ts'o:
"Fixed regressions (two stability regressions and a performance
regression) introduced during the 3.10-rc1 merge window.
Also included is a bug fix relating to allocating blocks after
resizing an ext3 file system when using the ext4 file system driver"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd,jbd2: fix oops in jbd2_journal_put_journal_head()
ext4: revert "ext4: use io_end for multiple bios"
ext4: limit group search loop for non-extent files
ext4: fix fio regression
|
|
In the case where we are allocating for a non-extent file,
we must limit the groups we allocate from to those below
2^32 blocks, and ext4_mb_regular_allocator() attempts to
do this initially by putting a cap on ngroups for the
subsequent search loop.
However, the initial target group comes in from the
allocation context (ac), and it may already be beyond
the artificially limited ngroups. In this case,
the limit
if (group == ngroups)
group = 0;
at the top of the loop is never true, and the loop will
run away.
Catch this case inside the loop and reset the search to
start at group 0.
[sandeen@redhat.com: add commit msg & comments]
Signed-off-by: Lachlan McIlroy <lmcilroy@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS updates from Al Viro,
Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).
7kloc removed.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
don't bother with deferred freeing of fdtables
proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
proc: Make the PROC_I() and PDE() macros internal to procfs
proc: Supply a function to remove a proc entry by PDE
take cgroup_open() and cpuset_open() to fs/proc/base.c
ppc: Clean up scanlog
ppc: Clean up rtas_flash driver somewhat
hostap: proc: Use remove_proc_subtree()
drm: proc: Use remove_proc_subtree()
drm: proc: Use minor->index to label things, not PDE->name
drm: Constify drm_proc_list[]
zoran: Don't print proc_dir_entry data in debug
reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
proc: Supply an accessor for getting the data from a PDE's parent
airo: Use remove_proc_subtree()
rtl8192u: Don't need to save device proc dir PDE
rtl8187se: Use a dir under /proc/net/r8180/
proc: Add proc_mkdir_data()
proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
proc: Move PDE_NET() to fs/proc/proc_net.c
...
|
|
This patch should fix sparse complains about shadow declatations.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
The only part of proc_dir_entry the code outside of fs/proc
really cares about is PDE(inode)->data. Provide a helper
for that; static inline for now, eventually will be moved
to fs/proc, along with the knowledge of struct proc_dir_entry
layout.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Improve mb_free_blocks speed by clearing entire range at once instead
of iterating over each bit. Freeing block-by-block also makes buddy
bitmap subtree flip twice making most of the work a no-op. Very few
bits in buddy bitmap require change, e.g. freeing entire group is a 1
bit flip only. As a result, releasing blocks of 60G file now takes
5ms instead of 2.7s. This is especially good for non-preemptive
kernels as there is no rescheduling during release.
Signed-off-by: Andrey Sidorov <qrxd43@motorola.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Currently on many places in ext4 we're using
ext4_get_group_no_and_offset() even though we're only interested in
knowing the block group of the particular block, not the offset within
the block group so we can use more efficient way to compute block
group.
This patch introduces ext4_get_group_number() which computes block
group for a given block much more efficiently. Use this function
instead of ext4_get_group_no_and_offset() everywhere where we're only
interested in knowing the block group.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
It is incorrect to use list_for_each_entry_safe() for journal callback
traversial because ->next may be removed by other task:
->ext4_mb_free_metadata()
->ext4_mb_free_metadata()
->ext4_journal_callback_del()
This results in the following issue:
WARNING: at lib/list_debug.c:62 __list_del_entry+0x1c0/0x250()
Hardware name:
list_del corruption. prev->next should be ffff88019a4ec198, but was 6b6b6b6b6b6b6b6b
Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode sg xhci_hcd button sd_mod crc_t10dif aesni_intel ablk_helper cryptd lrw aes_x86_64 xts gf128mul ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_mod
Pid: 16400, comm: jbd2/dm-1-8 Tainted: G W 3.8.0-rc3+ #107
Call Trace:
[<ffffffff8106fb0d>] warn_slowpath_common+0xad/0xf0
[<ffffffff8106fc06>] warn_slowpath_fmt+0x46/0x50
[<ffffffff813637e9>] ? ext4_journal_commit_callback+0x99/0xc0
[<ffffffff8148cae0>] __list_del_entry+0x1c0/0x250
[<ffffffff813637bf>] ext4_journal_commit_callback+0x6f/0xc0
[<ffffffff813ca336>] jbd2_journal_commit_transaction+0x23a6/0x2570
[<ffffffff8108aa42>] ? try_to_del_timer_sync+0x82/0xa0
[<ffffffff8108b491>] ? del_timer_sync+0x91/0x1e0
[<ffffffff813d3ecf>] kjournald2+0x19f/0x6a0
[<ffffffff810ad630>] ? wake_up_bit+0x40/0x40
[<ffffffff813d3d30>] ? bit_spin_lock+0x80/0x80
[<ffffffff810ac6be>] kthread+0x10e/0x120
[<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70
[<ffffffff818ff6ac>] ret_from_fork+0x7c/0xb0
[<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70
This patch fix the issue as follows:
- ext4_journal_commit_callback() make list truly traversial safe
simply by always starting from list_head
- fix race between two ext4_journal_callback_del() and
ext4_journal_callback_try_del()
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.com
|
|
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
|
|
A user who was using a 8TB+ file system and with a very large flexbg
size (> 65536) could cause the atomic_t used in the struct flex_groups
to overflow. This was detected by PaX security patchset:
http://forums.grsecurity.net/viewtopic.php?f=3&t=3289&p=12551#p12551
This bug was introduced in commit 9f24e4208f7e, so it's been around
since 2.6.30. :-(
Fix this by using an atomic64_t for struct orlav_stats's
free_clusters.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Cc: stable@vger.kernel.org
|
|
Using yield() is strongly discouraged (see sched/core.c) especially
since we can just use cond_resched().
Replace all use of yield() with cond_resched().
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Remove unused variable 'freed' in ext4_free_blocks().
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
We're using macro EXT4_B2C() to convert number of blocks to number of
clusters for bigalloc file systems. However, we should be using
EXT4_NUM_B2C().
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
There are multiple reasons to move away from debugfs. First of all,
we are only using it for a single parameter, and it is much more
complicated to set up (some 30 lines of code compared to 3), and one
more thing that might fail while loading the ext4 module.
Secondly, as a module paramter it can be specified as a boot option if
ext4 is built into the kernel, or as a parameter when the module is
loaded, and it can also be manipulated dynamically under
/sys/module/ext4/parameters/mballoc_debug. So it is more flexible.
Ultimately we want to move away from using mb_debug() towards
tracepoints, but for now this is still a useful simplification of the
code base.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
The ext4 block allocator only maintains buddy bitmaps for chunks which
are less than or equal to one quarter of a block group. That is, for
a file aystem with a 1k blocksize, and where the number of blocks in a
block group is 8192 blocks, the largest chunk size tracked by buddy
bitmaps is 2048 blocks.
For a file system with a 4k blocksize, and where the number of blocks
in a block group is 32768 blocks, the largest chunk size tracked by
buddy bitmaps is 8192 blocks.
To work around this code, mballoc.c before this commit would truncate
allocation requests to the number of blocks in a block group minus 10.
Why 10? Aside from being a completely arbitrary number, it avoids
block allocation to be a power of two larger than 25% of the block
group. If you try to explicitly fallocate 50% of the block group
size, this will demonstrate the problem; the block allocation code
will scan the all of the blocks in the file system with cr==0 (since
the request is for a natural power of two), but then completely fail
for all blocks groups, since the buddy bitmaps don't track chunk sizes
of 50% of the block group.
To fix this, in these we use ext4_mb_complex_scan_group() instead of
ext4_mb_simple_scan_group().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger@dilger.ca>
|
|
In ext4_mb_add_n_trim(), lg_prealloc_lock should be taken when
changing the lg_prealloc_list.
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
We should warn user then the discard request fails. However we need to
exclude -EOPNOTSUPP case since parts of the device might not support it
while other parts can. So print the kernel warning when the error !=
-EOPNOTSUPP is returned from ext4_issue_discard().
We should also handle error cases in batched discard, again excluding
EOPNOTSUPP.
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
I think the whole function could be made prettier, but
that goto really took the cake for too-clever-by-half.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Various bug fixes for ext4. The most serious of them fixes a security
bug (CVE-2012-4508) which leads to stale data exposure when we have
fallocate racing against writes to files undergoing delayed
allocation. We also have two fixes for the metadata checksum feature,
the most serious of which can cause the superblock to have a invalid
checksum after a power failure."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: Avoid underflow in ext4_trim_fs()
ext4: Checksum the block bitmap properly with bigalloc enabled
ext4: fix undefined bit shift result in ext4_fill_flex_info
ext4: fix metadata checksum calculation for the superblock
ext4: race-condition protection for ext4_convert_unwritten_extents_endio
ext4: serialize fallocate with ext4_convert_unwritten_extents
|
|
Currently if len argument in ext4_trim_fs() is smaller than one block,
the 'end' variable underflow. Avoid that by returning EINVAL if len is
smaller than file system block.
Also remove useless unlikely().
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
In mke2fs, we only checksum the whole bitmap block and it is right.
While in the kernel, we use EXT4_BLOCKS_PER_GROUP to indicate the
size of the checksumed bitmap which is wrong when we enable bigalloc.
The right size should be EXT4_CLUSTERS_PER_GROUP and this patch fixes
it.
Also as every caller of ext4_block_bitmap_csum_set and
ext4_block_bitmap_csum_verify pass in EXT4_BLOCKS_PER_GROUP(sb)/8,
we'd better removes this parameter and sets it in the function itself.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"The big new feature added this time is supporting online resizing
using the meta_bg feature. This allows us to resize file systems
which are greater than 16TB. In addition, the speed of online
resizing has been improved in general.
We also fix a number of races, some of which could lead to deadlocks,
in ext4's Asynchronous I/O and online defrag support, thanks to good
work by Dmitry Monakhov.
There are also a large number of more minor bug fixes and cleanups
from a number of other ext4 contributors, quite of few of which have
submitted fixes for the first time."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (69 commits)
ext4: fix ext4_flush_completed_IO wait semantics
ext4: fix mtime update in nodelalloc mode
ext4: fix ext_remove_space for punch_hole case
ext4: punch_hole should wait for DIO writers
ext4: serialize truncate with owerwrite DIO workers
ext4: endless truncate due to nonlocked dio readers
ext4: serialize unlocked dio reads with truncate
ext4: serialize dio nonlocked reads with defrag workers
ext4: completed_io locking cleanup
ext4: fix unwritten counter leakage
ext4: give i_aiodio_unwritten a more appropriate name
ext4: ext4_inode_info diet
ext4: convert to use leXX_add_cpu()
ext4: ext4_bread usage audit
fs: reserve fallocate flag codepoint
ext4: remove redundant offset check in mext_check_arguments()
ext4: don't clear orphan list on ro mount with errors
jbd2: fix assertion failure in commit code due to lacking transaction credits
ext4: release donor reference when EXT4_IOC_MOVE_EXT ioctl fails
ext4: enable FITRIM ioctl on bigalloc file system
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull the trivial tree from Jiri Kosina:
"Tiny usual fixes all over the place"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
doc: fix old config name of kprobetrace
fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc
btrfs: fix the commment for the action flags in delayed-ref.h
btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID
vfs: fix kerneldoc for generic_fh_to_parent()
treewide: fix comment/printk/variable typos
ipr: fix small coding style issues
doc: fix broken utf8 encoding
nfs: comment fix
platform/x86: fix asus_laptop.wled_type module parameter
mfd: printk/comment fixes
doc: getdelays.c: remember to close() socket on error in create_nl_socket()
doc: aliasing-test: close fd on write error
mmc: fix comment typos
dma: fix comments
spi: fix comment/printk typos in spi
Coccinelle: fix typo in memdup_user.cocci
tmiofb: missing NULL pointer checks
tools: perf: Fix typo in tools/perf
tools/testing: fix comment / output typos
...
|
|
With a minor tweaks regarding minimum extent size to discard and
discarded bytes reporting the FITRIM can be enabled on bigalloc file
system and it works without any problem.
This patch fixes minlen handling and discarded bytes reporting to
take into consideration bigalloc enabled file systems and finally
removes the restriction and allow FITRIM to be used on file system with
bigalloc feature enabled.
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Using kmem_cache_zalloc() instead of kmem_cache_alloc() and memset().
spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Free block counters should be checked before doing allocation.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
This is a revert of commit b56ff9d397ce, which removed the call to
ext4_issue_discard() to fix a BUG reported because
ext4_issue_discard() was being called from inside a block group
spinlock. As it turns out this bug had already been fixed by Lukas
Czerner in commit 53fdcf992d61 by the simple expedient of moving when
we call ext4_issue_discard() outside the spinlock.
So it should be safe to re-enable this functionality, which I tested
by putting an BUG_ON(in_atomic) just after the restored callsite to
ext4_issue_discard().
Addresses-Google-Bug: #6750518
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Anatol Pomozov <anatol.pomozov@gmail.com>
|
|
Previously we allocated the s_group_info array with enough space for
any future possible growth of the file system via online resize. This
is unfortunate because it wastes memory, and it doesn't work for the
meta_bg scheme, since there is no limit based on the number of
reserved gdt blocks. So add the code to grow the s_group_info array
as needed.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
All the routines call mb_find_extent are setting argument 'order' to 0
just like:
mb_find_extent(e4b, 0, ex.fe_start, ex.fe_len, &ex);
therefore the useless argument should be removed.
Signed-off-by: Robin Dong <sanbai@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Add a short circuit check to ext4_mb_group_group() so that we don't
bother to load the block bitmap for a block group which does not have
any space available. (Or which does not have enough space until we
are in desperation mode, i.e., when cr == 3.)
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=45741
Reported-by: mirek@me.com
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Commit a0375156 properly notes that superblock doesn't need to be marked
as dirty when only number of free inodes / blocks / number of directories
changes since that is recomputed on each mount anyway. However that comment
leaves some unnecessary markings as dirty in place. Remove these.
Artem: tested using xfstests for both journalled and non-journalled ext4.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
In this patch, the statement "poff = block % blocks_per_page"
in ext4_mb_get_buddy_page_lock has no effect.
It will be optimized out by the compiler, but it's better to remove it.
Signed-off-by: Haibo Liu <HaiboLiu6@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Currently ext4_mb_load_buddy is called for every group, irrespective
of whether the group info is already in memory, while reading
/proc/fs/ext4/<partition>/mb_groups proc file. For the purpose of
mb_groups proc file, it is unnecessary to load the file group info
from disk if it was loaded in past. These calls to ext4_mb_load_buddy
make reading the mb_groups proc file expensive.
Also, the locks around ext4_get_group_info are not required.
This patch modifies the code to call ext4_mb_load_buddy only if the
group info had never been loaded into memory in past. It also removes
the mb group locking around ext4_get_group_info call.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
We can't have references held on pages in the s_buddy_cache while we are
trying to truncate its pages and put the inode. All the pages must be
gone before we reach clear_inode. This can only be gauranteed if we
can prevent new users from grabbing references to s_buddy_cache's pages.
The original bug can be reproduced and the bug fix can be verified by:
while true; do mount -t ext4 /dev/ram0 /export/hda3/ram0; \
umount /export/hda3/ram0; done &
while true; do cat /proc/fs/ext4/ram0/mb_groups; done
Signed-off-by: Salman Qazi <sqazi@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
|
|
ext4_free_blocks fails to pair an ext4_mb_load_buddy with a matching
ext4_mb_unload_buddy when it fails a memory allocation.
Signed-off-by: Salman Qazi <sqazi@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
|
|
remove 'len' variable in ext4_discard_allocated_blocks() because it is
useless.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
needs_recovery in ext4_mb_init() is not used, remove it.
Signed-off-by: Akira Fujita <a-fujita@rs.jp.ne.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
metadata_csum supersedes uninit_bg. Convert the ROCOMPAT uninit_bg
flag check to a helper function that covers both, and make the
checksum calculation algorithm use either crc16 or the metadata_csum
chosen algorithm depending on which flag is set. Print a warning if
we try to mount a filesystem with both feature flags set.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Compute and verify the checksum of the block bitmap; this checksum is
stored in the block group descriptor.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Currently if the range to trim is too small, for example on 1K fs
the request to trim the first block, then the 'range->len' is not set
reporting wrong number of discarded block to the caller.
Fix this by always setting the 'range->len' before we return. Note that
when there is a failure (-EINVAL) caller can not depend on 'range->len'
being set properly.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Currently when there is not enough free blocks in the block group to
discard (grp->bb_free < minlen) the 'trimmed' is bumped up anyway with
the number of discarded blocks from the previous iteration. Fix this
by bumping up 'trimmed' only if the ext4_trim_all_free() was actually
run.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
The overflow can happen when we are calling get_group_no_and_offset()
which stores the group number in the ext4_grpblk_t type which is
actually int. However when the blocknr is big enough the group number
might be bigger than ext4_grpblk_t resulting in overflow. This will
most likely happen with FITRIM default argument len = ULLONG_MAX.
Fix this by using "end" variable instead of "start+len" as it is easier
to get right and specifically check that the end is not beyond the end
of the file system, so we are sure that the result of
get_group_no_and_offset() will not overflow. Otherwise truncate it to
the size of the file system.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
The functions ext4_msg() and ext4_error() already tack on a trailing
newline, so remove the unnecessary extra newline.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
ext4_msg adds "EXT4-fs: " to the messsage output.
Remove the redundant bits from uses.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
