summaryrefslogtreecommitdiff
path: root/fs/btrfs/inode-map.c
AgeCommit message (Collapse)AuthorFilesLines
2011-06-04btrfs: add helper for fs_info->closingDavid Sterba1-2/+1
wrap checking of filesystem 'closing' flag and fix a few missing memory barriers. Signed-off-by: David Sterba <dsterba@suse.cz>
2011-06-04Btrfs: add mount -o inode_cacheChris Mason1-0/+20
This makes the inode map cache default to off until we fix the overflow problem when the free space crcs don't fit inside a single page. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-06-04Btrfs: don't save the inode cache if we are deleting this rootJosef Bacik1-0/+5
With xfstest 254 I can panic the box every time with the inode number caching stuff on. This is because we clean the inodes out when we delete the subvolume, but then we write out the inode cache which adds an inode to the subvolume inode tree, and then when it gets evicted again the root gets added back on the dead roots list and is deleted again, so we have a double free. To stop this from happening just return 0 if refs is 0 (and we're not the tree root since tree root always has refs of 0). With this fix 254 no longer panics. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Tested-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-06-04Btrfs: don't save the inode cache in non-FS rootsliubo1-0/+6
This adds extra checks to make sure the inode map we are caching really belongs to a FS root instead of a special relocation tree. It prevents crashes during balancing operations. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-26Btrfs: setup free ino caching in a more asynchronous wayLi Zefan1-6/+22
For a filesystem that has lots of files in it, the first time we mount it with free ino caching support, it can take quite a long time to setup the caching before we can create new files. Here we fill the cache with [highest_ino, BTRFS_LAST_FREE_OBJECTID] before we start the caching thread to search through the extent tree. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-22Merge branch 'cleanups' of git://repo.or.cz/linux-2.6/btrfs-unstable into ↵Chris Mason1-1/+1
inode_numbers Conflicts: fs/btrfs/extent-tree.c fs/btrfs/free-space-cache.c fs/btrfs/inode.c fs/btrfs/tree-log.c Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-04-25Btrfs: Support reading/writing on disk free ino cacheLi Zefan1-0/+87
This is similar to block group caching. We dedicate a special inode in fs tree to save free ino cache. At the very first time we create/delete a file after mount, the free ino cache will be loaded from disk into memory. When the fs tree is commited, the cache will be written back to disk. To keep compatibility, we check the root generation against the generation of the special inode when loading the cache, so the loading will fail if the btrfs filesystem was mounted in an older kernel before. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2011-04-25Btrfs: Cache free inode numbers in memoryLi Zefan1-5/+336
Currently btrfs stores the highest objectid of the fs tree, and it always returns (highest+1) inode number when we create a file, so inode numbers won't be reclaimed when we delete files, so we'll run out of inode numbers as we keep create/delete files in 32bits machines. This fixes it, and it works similarly to how we cache free space in block cgroups. We start a kernel thread to read the file tree. By scanning inode items, we know which chunks of inode numbers are free, and we cache them in an rb-tree. Because we are searching the commit root, we have to carefully handle the cross-transaction case. The rb-tree is a hybrid extent+bitmap tree, so if we have too many small chunks of inode numbers, we'll use bitmaps. Initially we allow 16K ram of extents, and a bitmap will be used if we exceed this threshold. The extents threshold is adjusted in runtime. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2011-03-28Btrfs: cleanup some BUG_ON()Tsutomu Itoh1-1/+2
This patch changes some BUG_ON() to the error return. (but, most callers still use BUG_ON()) Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-21Btrfs: do not reuse objectid of deleted snapshot/subvolYan, Zheng1-78/+15
The new back reference format does not allow reusing objectid of deleted snapshot/subvol. So we use ++highest_objectid to allocate objectid for new snapshot/subvol. Now we use ++highest_objectid to allocate objectid for both new inode and new snapshot/subvolume, so this patch removes 'find hole' code in btrfs_find_free_objectid. Signed-off-by: Yan Zheng <zheng.yan@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-27Btrfs: Fix a trivial warning using max() of u64 vs ULL.Joel Becker1-1/+1
A small warning popped up on ia64 because inode-map.c was comparing a u64 object id with the ULL FIRST_FREE_OBJECTID. My first thought was that all the OBJECTID constants should contain the u64 cast because btrfs code deals entirely in u64s. But then I saw how large that was, and figured I'd just fix the max() call. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-12Btrfs: remove btrfs_init_pathJeff Mahoney1-1/+0
btrfs_init_path was initially used when the path objects were on the stack. Now all the work is done by btrfs_alloc_path and btrfs_init_path isn't required. This patch removes it, and just uses kmem_cache_zalloc to zero out the object. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-01-05Btrfs: Fix checkpatch.pl warningsChris Mason1-1/+0
There were many, most are fixed now. struct-funcs.c generates some warnings but these are bogus. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-26Btrfs: extent_map and data=ordered fixes for space balancingZheng Yan1-0/+4
* Add an EXTENT_BOUNDARY state bit to keep the writepage code from merging data extents that are in the process of being relocated. This allows us to do accounting for them properly. * The balancing code relocates data extents indepdent of the underlying inode. The extent_map code was modified to properly account for things moving around (invalidating extent_map caches in the inode). * Don't take the drop_mutex in the create_subvol ioctl. It isn't required. * Fix walking of the ordered extent list to avoid races with sys_unlink * Change the lock ordering rules. Transaction start goes outside the drop_mutex. This allows btrfs_commit_transaction to directly drop the relocation trees. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Update find free objectid function for orphan cleanup codeZheng Yan1-7/+8
Orphan items use BTRFS_ORPHAN_OBJECTID (-5UUL) as key objectid. This affects the find free objectid functions, inode objectid can easily overflow after orphan file cleanup. --- Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Replace the big fs_mutex with a collection of other locksChris Mason1-0/+8
Extent alloctions are still protected by a large alloc_mutex. Objectid allocations are covered by a objectid mutex Other btree operations are protected by a lock on individual btree nodes Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Fix for btrfs_find_free_objectidYan1-3/+1
btrfs_find_free_objectid may return a used objectid due to arithmetic underflow. This bug may happen when parameter 'root' is tree root, so it may cause serious problems when creating snapshot or sub-volume. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25Btrfs: Create extent_buffer interface for large blocksizesChris Mason1-8/+9
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-07-11Btrfs: trivial include fixupsZach Brown1-1/+0
Almost none of the files including module.h need to do so, remove them. Include sched.h in extent-tree.c to silence a warning about cond_resched() being undeclared. Signed-off-by: Zach Brown <zach.brown@oracle.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-06-12Btrfs: add GPLv2Chris Mason1-0/+18
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-04-10Btrfs: drop the inode map treeChris Mason1-61/+4
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-04-05Btrfs: dirindex optimizationsChris Mason1-15/+33
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-04-04Btrfs: tweak the inode-map and free extent search starts on cold mountChris Mason1-7/+20
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-04-02Btrfs: corruptions fixedChris Mason1-18/+25
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-03-30Btrfs: corruption hunt continuesChris Mason1-1/+1
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-03-27Btrfs: reference counts on data extentsChris Mason1-0/+1
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-03-23btrfs_create, btrfs_write_super, btrfs_sync_fsChris Mason1-0/+1
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-03-22Mountable btrfs, with readdirChris Mason1-4/+4
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-03-21Btrfs: initial move to kernel module landChris Mason1-4/+1
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2007-03-20Btrfs: Add inode map, and the start of file extent itemsChris Mason1-0/+136
Signed-off-by: Chris Mason <chris.mason@oracle.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-04 18:14:33 +0000