summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-10-31Merge branch 'dt/gic' into highbank/socArnd Bergmann2-6/+107
Conflicts: arch/arm/Kconfig
2011-10-31of/irq: introduce of_irq_initRob Herring1-0/+107
of_irq_init will scan the devicetree for matching interrupt controller nodes. Then it calls an initialization function for each found controller in the proper order with parent nodes initialized before child nodes. Based on initial pseudo code from Grant Likely. Changes in v4: - Drop unnecessary empty list check - Be more verbose on errors - Simplify "if (!desc) WARN_ON(1)" to "if (WARN_ON(!desc))" Changes in v3: - add missing kfree's found by Jamie - Implement Grant's comments to simplify the init loop - fix function comments Changes in v2: - Complete re-write of list searching code from Grant Likely Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Tested-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-30Merge branches 'depends/rmk/io', 'depends/rmk/l2x0' and 'depends/rmk/gpio' ↵Arnd Bergmann37-520/+2612
into highbank/soc
2011-10-24Merge remote-tracking branch 'rmk/devel-stable' into HEADRob Herring1-6/+0
2011-10-18Merge branch 'mach_memory_h' of git://git.linaro.org/people/nico/linux into ↵Russell King1-6/+0
devel-stable
2011-10-04Merge git://github.com/davem330/netLinus Torvalds8-42/+48
* git://github.com/davem330/net: pch_gbe: Fixed the issue on which a network freezes pch_gbe: Fixed the issue on which PC was frozen when link was downed. make PACKET_STATISTICS getsockopt report consistently between ring and non-ring net: xen-netback: correctly restart Tx after a VM restore/migrate bonding: properly stop queuing work when requested can bcm: fix incomplete tx_setup fix RDSRDMA: Fix cleanup of rds_iw_mr_pool net: Documentation: Fix type of variables ibmveth: Fix oops on request_irq failure ipv6: nullify ipv6_ac_list and ipv6_fl_list when creating new socket cxgb4: Fix EEH on IBM P7IOC can bcm: fix tx_setup off-by-one errors MAINTAINERS: tehuti: Alexander Indenbaum's address bounces dp83640: reduce driver noise ptp: fix L2 event message recognition
2011-10-04Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds6-158/+33
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms: fix channel_remap setup (v2) drm/radeon: Set cursor x/y to 0 when x/yorigin > 0. drm/radeon: Update AVIVO cursor coordinate origin before x/yorigin calculation. drm/radeon: Simplify cursor x/yorigin calculation. drm/radeon/kms: fix cursor image off-by-one error drm/radeon/kms: Fix logic error in DP HPD handler drm/radeon/kms: add retry limits for native DP aux defer drm/radeon/kms: fix regression in DP aux defer handling
2011-10-04Merge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-27/+66
* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6: spi-topcliff-pch: Fix overrun issue spi-topcliff-pch: Add recovery processing in case FIFO overrun error occurs spi-topcliff-pch: Fix CPU read complete condition issue spi-topcliff-pch: Fix SSN Control issue spi-topcliff-pch: add tx-memory clear after complete transmitting
2011-10-04PCI: Disable MPS configuration by defaultJon Mason2-2/+18
Add the ability to disable PCI-E MPS turning and using the BIOS configured MPS defaults. Due to the number of issues recently discovered on some x86 chipsets, make this the default behavior. Also, add the option for peer to peer DMA MPS configuration. Peer to peer DMA is outside the scope of this patch, but MPS configuration could prevent it from working by having the MPS on one root port different than the MPS on another. To work around this, simply make the system wide MPS the smallest possible value (128B). Signed-off-by: Jon Mason <mason@myri.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-04drm/radeon/kms: fix channel_remap setup (v2)Alex Deucher3-127/+0
Most asics just use the hw default value which requires no explicit programming. For those that need a different value, the vbios will program it properly. As such, there's no need to program these registers explicitly in the driver. Changing MC_SHARED_CHREMAP requires a reload of all data in vram otherwise its contents will be scambled. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=40103 v2: drop now unused channel_remap functions. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-04spi-topcliff-pch: Fix overrun issueTomoya MORINAGA1-5/+23
We found that adding load, Rx data sometimes drops.(with DMA transfer mode) The cause is that before starting Rx-DMA processing, Tx-DMA processing starts. This causes FIFO overrun occurs. This patch fixes the issue by modifying FIFO tx-threshold and DMA descriptor size like below. Current this patch Rx-descriptor 4Byte+12Byte*341 --> 12Byte*340-4Byte-12Byte Rx-threshold (Not modified) Tx-descriptor 4Byte+12Byte*341 --> 16Byte-12Byte*340 Rx-threshold 12Byte --> 2Byte Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-04spi-topcliff-pch: Add recovery processing in case FIFO overrun error occursTomoya MORINAGA1-7/+24
Add recovery processing in case FIFO overrun error occurs with DMA transfer mode. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-04spi-topcliff-pch: Fix CPU read complete condition issueTomoya MORINAGA1-8/+11
We found Rx data sometimes drops.(with non-DMA transfer mode) The cause is read complete condition is not true. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-04spi-topcliff-pch: Fix SSN Control issueTomoya MORINAGA1-7/+3
During processing 1 command/data series, SSN should keep LOW. However, currently, SSN becomes HIGH. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-04spi-topcliff-pch: add tx-memory clear after complete transmittingTomoya MORINAGA1-0/+5
Currently, in case of reading date from SPI flash, command is sent twice. The cause is that tx-memory clear processing is missing . This patch adds the tx-momory clear processing. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-03lis3: fix regression of HP DriveGuard with 8bit chipTakashi Iwai1-6/+8
Commit 2a7fade7e03 ("hwmon: lis3: Power on corrections") caused a regression on HP laptops with 8bit chip. Writing CTRL2_BOOT_8B bit seems clearing the BIOS setup, and no proper interrupt for DriveGuard will be triggered any more. Since the init code there is basically only for embedded devices, put a pdata check so that the problematic initialization will be skipped for hp_accel stuff. Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: Eric Piel <eric.piel@tremplin-utc.net> Cc: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-03Merge branch 'hwmon-for-linus' of git://github.com/groeck/linuxLinus Torvalds1-15/+13
* 'hwmon-for-linus' of git://github.com/groeck/linux: hwmon: (coretemp) Avoid leaving around dangling pointer hwmon: (coretemp) Fixup platform device ID change
2011-10-03ide-disk: Fix request requeuingBorislav Petkov1-1/+6
Simon Kirby reported that on his RAID setup with idedisk underneath the box OOMs after a couple of days of runtime. Running with CONFIG_DEBUG_KMEMLEAK pointed to idedisk_prep_fn() which unconditionally allocates an ide_cmd struct. However, ide_requeue_and_plug() can be called more than once per request, either from the request issue or the IRQ handler path and do blk_peek_request() ends up in idedisk_prep_fn() repeatedly, allocating a struct ide_cmd everytime and "forgetting" the previous pointer. Make sure the code reuses the old allocated chunk. Reported-and-tested-by: Simon Kirby <sim@hostway.ca> Cc: <stable@kernel.org> [ 39.x, 3.0.x ] Link: http://marc.info/?l=linux-kernel&m=131667641517919 Link: http://lkml.kernel.org/r/20110922072643.GA27232@hostway.ca Signed-off-by: Borislav Petkov <bp@alien8.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03pch_gbe: Fixed the issue on which a network freezesToshiharu Okada1-29/+27
The pch_gbe driver has an issue which a network stops, when receiving traffic is high. In the case, The link down and up are necessary to return a network. This patch fixed this issue. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03pch_gbe: Fixed the issue on which PC was frozen when link was downed.Toshiharu Okada1-1/+1
When a link was downed during network use, there is an issue on which PC freezes. This patch fixed this issue. Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03net: xen-netback: correctly restart Tx after a VM restore/migrateDavid Vrabel1-2/+2
If a VM is saved and restored (or migrated) the netback driver will no longer process any Tx packets from the frontend. xenvif_up() does not schedule the processing of any pending Tx requests from the front end because the carrier is off. Without this initial kick the frontend just adds Tx requests to the ring without raising an event (until the ring is full). This was caused by 47103041e91794acdbc6165da0ae288d844c820b (net: xen-netback: convert to hw_features) which reordered the calls to xenvif_up() and netif_carrier_on() in xenvif_connect(). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03bonding: properly stop queuing work when requestedAndy Gospodarek3-7/+12
During a test where a pair of bonding interfaces using ARP monitoring were both brought up and torn down (with an rmmod) repeatedly, a panic in the timer code was noticed. I tracked this down and determined that any of the bonding functions that ran as workqueue handlers and requeued more work might not properly exit when the module was removed. There was a flag protected by the bond lock called kill_timers that is set when the interface goes down or the module is removed, but many of the functions that monitor link status now unlock the bond lock to take rtnl first. There is a chance that another CPU running the rmmod could get the lock and set kill_timers after the first check has passed. This patch does not allow any function to queue work that will make itself run unless kill_timers is not set. I also noticed while doing this work that bond_resend_igmp_join_requests did not have a check for kill_timers, so I added the needed call there as well. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Reported-by: Liang Zheng <lzheng@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-03drm/radeon: Set cursor x/y to 0 when x/yorigin > 0.Michel Dänzer1-10/+10
Apart from the obvious cleanup, this should make the line cursor_end = x - xorigin + w; correct now. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-03drm/radeon: Update AVIVO cursor coordinate origin before x/yorigin calculation.Michel Dänzer1-5/+7
Fixes cursor disappearing prematurely when moving off a top/left edge which is not located at the desktop top/left edge. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Cc: stable@kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-03drm/radeon: Simplify cursor x/yorigin calculation.Michel Dänzer1-6/+2
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-03drm/radeon/kms: fix cursor image off-by-one errorNicholas Miell1-2/+2
The mouse cursor hotspot calculation when the cursor is partially off the top or left side of the screen was off by one. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=41158 Signed-off-by: Nicholas Miell <nmiell@gmail.com> Reviewed-by: Michel Dänzer <michel@daenzer.net> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-03drm/radeon/kms: Fix logic error in DP HPD handlerAlex Deucher1-4/+4
Only disable the pipe if the monitor is physically disconnected. The previous logic also disabled the pipe if the link was trained. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41248 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-03drm/radeon/kms: add retry limits for native DP aux deferAlex Deucher1-4/+8
The previous code could potentially loop forever. Limit the number of DP aux defer retries to 4 for native aux transactions, same as i2c over aux transactions. Noticed by: Brad Campbell <lists2009@fnarfbargle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Brad Campbell <lists2009@fnarfbargle.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-03drm/radeon/kms: fix regression in DP aux defer handlingAlex Deucher1-2/+2
An incorrect ordering in the error checking code lead to DP aux defer being skipped in the aux native write path. Move the bytes transferred check (ret == 0) below the defer check. Tracked down by: Brad Campbell <brad@fnarfbargle.com> Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41121 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Brad Campbell <brad@fnarfbargle.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-02Merge branch 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6Linus Torvalds1-1/+1
* 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6: mfd: Fix generic irq chip ack function name for jz4740-adc
2011-10-01ARM: 7104/1: plat-pxa: break out GPIO driver specificsLinus Walleij1-0/+2
The <mach/gpio.h> file is included from upper directories and deal with generic GPIO and gpiolib stuff. Break out the platform and driver specific defines and functions into its own header file. Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-01ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystemLinus Walleij2-0/+337
As per example from the other ARM boards, push the PXA GPIO driver down to the GPIO subsystem so it can be consolidated. Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-01ARM: 7042/3: mach-ep93xx: break out GPIO driver specificsLinus Walleij1-0/+3
The <mach/gpio.h> file is included from upper directories and deal with generic GPIO and gpiolib stuff. Break out the platform and driver specific defines and functions into its own header file. Cc: Ryan Mallon <rmallon@gmail.com> Acked-by: Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-29Merge branch 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linusLinus Torvalds8-17/+26
* 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus: [media] omap3isp: Fix build error in ispccdc.c [media] uvcvideo: Fix crash when linking entities [media] v4l: Make sure we hold a reference to the v4l2_device before using it [media] v4l: Fix use-after-free case in v4l2_device_release [media] uvcvideo: Set alternate setting 0 on resume if the bus has been reset [media] OMAP_VOUT: Fix build break caused by update_mode removal in DSS2
2011-09-29Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds1-2/+6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] cio: fix cio_tpi ignoring adapter interrupts [S390] gmap: always up mmap_sem properly [S390] Do not clobber personality flags on exec
2011-09-29Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linuxLinus Torvalds4-70/+47
* 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux: drm/i915: FBC off for ironlake and older, otherwise on by default drm/i915: Enable SDVO hotplug interrupts for HDMI and DVI drm/i915: Enable dither whenever display bpc < frame buffer bpc
2011-09-29ibmveth: Fix oops on request_irq failureBrian King1-2/+2
If request_irq fails, the ibmveth driver will overwrite the rc and end up returning a successful rc on its open function, resulting in an oops later when a packet gets sent and buffers are not allocated due to the failed open. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29cxgb4: Fix EEH on IBM P7IOCDivy Le Ray1-0/+3
Fix EEH recovery on new P Series platform by requesting fundamental reset. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29dp83640: reduce driver noiseRichard Cochran1-2/+2
The driver has two warning messages that might be triggered by normal use cases. When they appear, the messages give the impression of a never ending series of errors. This commit changes them to debug messages instead. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-28Merge git://github.com/davem330/netLinus Torvalds12-32/+68
* git://github.com/davem330/net: ipv6-multicast: Fix memory leak in IPv6 multicast. ipv6: check return value for dst_alloc net: check return value for dst_alloc ipv6-multicast: Fix memory leak in input path. bnx2x: add missing break in bnx2x_dcbnl_get_cap bnx2x: fix WOL by enablement PME in config space bnx2x: fix hw attention handling net: fix a typo in Documentation/networking/scaling.txt ath9k: Fix a dma warning/memory leak rtlwifi: rtl8192cu: Fix unitialized struct iwlagn: fix dangling scan request batman-adv: do_bcast has to be true for broadcast packets only cfg80211: Fix validation of AKM suites iwlegacy: do not use interruptible waits iwlegacy: fix command queue timeout ath9k_hw: Fix Rx DMA stuck for AR9003 chips
2011-09-28Merge git://bedivere.hansenpartnership.com/git/scsi-rc-fixes-2.6Linus Torvalds9-20/+54
* git://bedivere.hansenpartnership.com/git/scsi-rc-fixes-2.6: [SCSI] 3w-9xxx: fix iommu_iova leak [SCSI] cxgb3i: convert cdev->l2opt to use rcu to prevent NULL dereference [SCSI] scsi: qla4xxx needs libiscsi.o [SCSI] libsas: fix failure to revalidate domain for anything but the first expander child. [SCSI] aacraid: reset should disable MSI interrupt
2011-09-28hwmon: (coretemp) Avoid leaving around dangling pointerGuenter Roeck1-0/+1
Storing the struct temp_data pointer allocated from create_core_data() when returning an error has the potential of leaving around a pointer to freed memory. Reset it to NULL for error returns. Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2011-09-28hwmon: (coretemp) Fixup platform device ID changeJean Delvare1-15/+12
With recent change "hwmon: (coretemp) don't use kernel assigned CPU number as platform device ID", the microcode check is now running on random CPU. Fix that by checking the microcode before creating the platform device rather than at probe time. Also avoid calling TO_PHYS_ID(cpu) twice in the same function, it's expensive. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jan Beulich <jbeulich@suse.com> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-09-27Merge branch 'for-davem' of git://git.infradead.org/users/linville/wirelessDavid S. Miller9-29/+42
2011-09-27Merge branch 'pm-fixes' of git://github.com/rjwysocki/linux-pmLinus Torvalds1-37/+38
* 'pm-fixes' of git://github.com/rjwysocki/linux-pm: PM / Clocks: Do not acquire a mutex under a spinlock
2011-09-27Merge branch 'master' of git://git.infradead.org/users/linville/wireless ↵John W. Linville9-29/+42
into for-davem
2011-09-27bnx2x: add missing break in bnx2x_dcbnl_get_capShmulik Ravid1-0/+1
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-27bnx2x: fix WOL by enablement PME in config spaceDmitry Kravkov1-1/+9
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-27bnx2x: fix hw attention handlingDmitry Kravkov2-2/+16
Use register name to initialize attention mask Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-27ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h>Stephen Warren2-0/+3
This will eventually allow <mach/gpio.h> to be deleted. This mirrors LinusW's recent equivalent work on various other ARM platforms. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 21:52:07 +0000