summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2010-04-27bnx2: Update version to 2.0.9.Michael Chan1-2/+2
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27bnx2: Prevent "scheduling while atomic" warning with cnic, bonding and vlan.Michael Chan1-18/+20
The bonding driver calls ndo_vlan_rx_register() while holding bond->lock. The bnx2 driver calls bnx2_netif_stop() to stop the rx handling while changing the vlgrp. The call also stops the cnic driver which sleeps while the bond->lock is held and cause the warning. This code path only needs to stop the NAPI rx handling while we are changing the vlgrp. Since no reset is going to occur, there is no need to stop cnic in this case. By adding a parameter to bnx2_netif_stop() to skip stopping cnic, we can avoid the warning. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27bnx2: Fix lost MSI-X problem on 5709 NICs.Michael Chan1-1/+5
It has been reported that under certain heavy traffic conditions in MSI-X mode, the driver can lose an MSI-X vector causing all packets in the associated rx/tx ring pair to be dropped. The problem is caused by the chip dropping the write to unmask the MSI-X vector by the kernel (when migrating the IRQ for example). This can be prevented by increasing the GRC timeout value for these register read and write operations. Thanks to Dell for helping us debug this problem. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27cxgb3: Wait longer for control packets on initializationAndre Detsch1-1/+1
In some Power7 platforms, when using VIOS (Virtual I/O Server), we need to wait longer for control packets to finish transfer during initialization. Without this change, initialization may fail prematurely. Signed-off-by: Wen Xiong <wenxiong@us.ibm.com> Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27e1000e: enable/disable ASPM L0s and L1 and ERT according to hardware errataBruce Allan3-40/+55
Prompted by a previous patch submitted by Matthew Garret <mjg@redhat.com>, further digging into errata documentation reveals the current enabling or disabling of ASPM L0s and L1 states for certain parts supported by this driver are incorrect. 82571 and 82572 should always disable L1. For standard frames, 82573/82574/82583 can enable L1 but L0s must be disabled, and for jumbo frames 82573/82574 must disable L1. This allows for some parts to enable L1 in certain configurations leading to better power savings. Also according to the same errata, Early Receive (ERT) should be disabled on 82573 when using jumbo frames. Cc: Matthew Garret <mjg@redhat.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbe: Power down PHY during driver resetsPeter Waskiewicz3-24/+62
The PHY laser is still on during driver init. It's allowing garbage to hit our FIFO, which eventually can cause the entire device to die. Power down the laser while setting up the device, and re-enable the laser before getting link. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26r8169: more broken register writes workaroundfrançois romieu1-0/+5
78f1cd02457252e1ffbc6caa44a17424a45286b8 ("fix broken register writes") does not work for Al Viro's r8169 (XID 18000000). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26r8169: failure to enable mwi should not be fatalfrançois romieu1-14/+13
Few (6) network drivers enable mwi explicitly. Fewer worry about a failure. It is not a fix but it should avoid some annoyance like http://bugzilla.kernel.org/show_bug.cgi?id=15454 Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Conrad Kostecki <conikost@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26tg3: Fix INTx fallback when MSI failsAndre Detsch1-0/+1
tg3: Fix INTx fallback when MSI fails MSI setup changes the value of irq_vec in struct tg3 *tp. This attribute must be taken into account and restored before we try to do a new request_irq for INTx fallback. In powerpc, the original code was leading to an EINVAL return within request_irq, because the driver was trying to use the disabled MSI virtual irq number instead of tp->pdev->irq. Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-24e100: Fix the TX workqueue raceAlan Cox1-2/+8
Nothing stops the workqueue being left to run in parallel with close or a few other operations. This causes double unmaps and the like. See kerneloops.org #1041230 for an example Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23gianfar: Fix potential oops during OF address translationAnton Vorontsov1-5/+1
gianfar driver may pass NULL pointer to the of_translate_address(), which may lead to a kernel oops. Fix this by using of_iomap(), which is also much simpler and shorter. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23fsl_pq_mdio: Fix kernel oops during OF address translationAnton Vorontsov1-6/+14
Old P1020RDB device trees were not specifing tbipa address for MDIO nodes, which is now causing this kernel oops: ... eth2: TX BD ring size for Q[6]: 256 eth2: TX BD ring size for Q[7]: 256 Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0015504 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c0015504] memcpy+0x3c/0x9c LR [c000a9f8] __of_translate_address+0xfc/0x21c Call Trace: [df839e00] [c000a94c] __of_translate_address+0x50/0x21c (unreliable) [df839e50] [c01a33e8] get_gfar_tbipa+0xb0/0xe0 ... The old device trees are buggy, though having a dead ethernet is better than a dead kernel, so fix the issue by using of_iomap(). Also, a somewhat similar issue exist in the probe() routine, though there the oops is only a possibility. Nonetheless, fix it too. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21drivers/net/usb: Add new driver iphethDiego Giagio4-0/+582
Add new driver to use tethering with an iPhone device. After initial submission, apply fixes to fit the new driver into the kernel standards. There are still a couple of minor (almost cosmetic-level) issues, but the driver is fully functional right now. Signed-off-by: L. Alberto Giménez <agimenez@sysvalve.es> Signed-off-by: Diego Giagio <diego@giagio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21cxgb3: fix linkup issueHiroshi Shimamoto1-1/+1
I encountered an issue that not to link up on cxgb3 fabric. I bisected and found that this regression was introduced by 0f07c4ee8c800923ae7918c231532a9256233eed. Correct to pass phy_addr to cphy_init() at t3_xaui_direct_phy_prep(). Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21KS8851: NULL pointer dereference if list is emptyAbraham Arce1-5/+7
Fix NULL pointer dereference in ks8851_tx_work by checking if dequeued list is already empty before writing the packet to TX FIFO Unable to handle kernel NULL pointer dereference at virtual address 00000050 PC is at ks8851_tx_work+0xdc/0x1b0 LR is at wait_for_common+0x148/0x164 pc : [<c01c0df4>] lr : [<c025a980>] psr: 20000013 Backtrace: ks8851_tx_work+0x0/0x1b0 worker_thread+0x0/0x190 kthread+0x0/0x90 Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21net: 3c574_cs fix stats.tx_bytes counterAlexander Kurz1-2/+5
Update the stats counter calculation in 3c574_cs, similar to the method used in 3c589_cs. This corrects the contents of the counter on tests using a "Megahertz 574B" card. [linux@dominikbrodowski.net: clean up commit message] Signed-off-by: Alexander Kurz <linux@kbdbabel.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21can: Fix possible NULL pointer dereference in ems_usb.cHans J. Koch1-4/+4
In ems_usb_probe(), a pointer is dereferenced after making sure it is NULL... This patch replaces netdev->dev.parent with &intf->dev in dev_err() calls to avoid this. Signed-off-by: "Hans J. Koch" <hjk@linutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller65-1057/+1315
2010-04-20Merge branch 'master' of ↵David S. Miller7-15/+29
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-04-20Merge branch 'urgent' of ↵Linus Torvalds7-23/+55
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: fix error handling in cm4000_cs.c drivers/pcmcia: Add missing local_irq_restore serial_cs: MD55x support (PCMCIA GPRS/EDGE modem) (kernel 2.6.33) pcmcia: avoid late calls to pccard_validate_cis pcmcia: fix ioport size calculation in rsrc_nonstatic pcmcia: re-start on MFC override pcmcia: fix io_probe due to parent (PCI) resources pcmcia: use previously assigned IRQ for all card functions
2010-04-20Merge branch 'drm-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: delay vblank cleanup until after driver unload
2010-04-20drm: delay vblank cleanup until after driver unloadJesse Barnes1-2/+2
Drivers may use vblank calls now (e.g. drm_vblank_off) in their unload paths, so don't clean up the vblank related structures until after driver unload. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Kristian Høgsberg <krh@bitplanet.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-198139too: Fix a typo in the function name.Alexander Kuznetsov1-1/+1
Signed-off-by: Alexander Kuznetsov <alr.kuznetsov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-19Fix ISDN/Gigaset build failureLinus Torvalds1-0/+1
Commit b91ecb00 ("gigaset: include cleanup cleanup") removed an implicit sched.h inclusion that came in via slab.h, and caused various compile problems as a result. This should fix it. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds13-21/+24
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: gigaset: include cleanup cleanup packet : remove init_net restriction WAN: flush tx_queue in hdlc_ppp to prevent panic on rmmod hw_driver. ip: Fix ip_dev_loopback_xmit() net: dev_pick_tx() fix fib: suppress lockdep-RCU false positive in FIB trie. tun: orphan an skb on tx forcedeth: fix tx limit2 flag check iwlwifi: work around bogus active chains detection
2010-04-19Merge branch 'drm-linus' of ↵Linus Torvalds17-19/+138
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: add FireMV 2400 PCI ID. drm/radeon/kms: allow R500 regs VAP_ALT_NUM_VERTICES and VAP_INDEX_OFFSET drivers/gpu/radeon: Add MSPOS regs to safe list. drm/radeon/kms: disable the tv encoder when tv/cv is not in use drm/radeon/kms: adjust pll settings for tv drm/radeon/kms: fix tv dac conflict resolver drm/radeon/kms/evergreen: don't enable hdmi audio stuff drm/radeon/kms/atom: fix dual-link DVI on DCE3.2/4.0 drm/radeon/kms: fix rs600 tlb flush drm/radeon/kms: print GPU family and device id when loading drm/radeon/kms: fix calculation of mipmapped 3D texture sizes drm/radeon/kms: only change mode when coherent value changes. drm/radeon/kms: more atom parser fixes (v2)
2010-04-19pcmcia: fix error handling in cm4000_cs.cDan Carpenter1-3/+5
In the original code we used -ENODEV as the number of bytes to copy_to_user() and we didn't release the locks. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-19drm/radeon/kms: allow R500 regs VAP_ALT_NUM_VERTICES and VAP_INDEX_OFFSETMarek Olšák5-6/+20
[airlied: fix V_A_N_V to not be safe and fix check to make sure only r500 - bump userspace version] Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-19drivers/gpu/radeon: Add MSPOS regs to safe list.Corbin Simpson4-0/+8
Permits MSAA and D3D-style rasterization. [airlied: add rs600] Signed-off-by: Corbin Simpson <MostAwesomeDude@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-19drm/radeon/kms: disable the tv encoder when tv/cv is not in useAlex Deucher1-2/+6
Switching between TV and VGA caused VGA to break on some systems since the TV encoder was left enabled when VGA was used. fixes fdo bug 25520. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-19drm/radeon/kms: adjust pll settings for tvAlex Deucher1-0/+4
May fix fdo bug 26582. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-19drm/radeon/kms: fix tv dac conflict resolverAlex Deucher1-0/+5
On systems with the tv dac shared between DVI and TV, we can only use the dac for one of the connectors. However, when using a digital monitor on the DVI port, you can use the dac for the TV connector just fine. Check the use_digital status when resolving the conflict. Fixes fdo bug 27649, possibly others. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-19drm/radeon/kms/evergreen: don't enable hdmi audio stuffAlex Deucher2-1/+10
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-19drm/radeon/kms/atom: fix dual-link DVI on DCE3.2/4.0Alex Deucher1-0/+4
Got broken during the evergreen merge. Fixes fdo bug 27001. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-19drm/radeon/kms: fix rs600 tlb flushJerome Glisse1-1/+1
Typo in in flush leaded to no flush of the RS600 tlb which ultimately leaded to massive system ram corruption, with this patch everythings seems to work properly. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-19drm/radeon/kms: print GPU family and device id when loadingJerome Glisse2-2/+54
This will help figuring out GPU when looking at bugs log. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-18gigaset: include cleanup cleanupTilman Schmidt9-20/+1
Commit 5a0e3ad causes slab.h to be included twice in many of the Gigaset driver's source files, first via the common include file gigaset.h and then a second time directly. Drop the spares, and use the opportunity to clean up a few more similar cases. Impact: cleanup, no functional change Signed-off-by: Tilman Schmidt <tilman@imap.cc> CC: Tejun Heo <tj@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-17Merge branch 'for-linus' of ↵Linus Torvalds20-852/+871
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Ignore LVDS EDID when it is unavailabe or invalid drm/i915: Add no_lvds entry for the Clientron U800 drm/i915: Rename many remaining uses of "output" to encoder or connector. drm/i915: Rename intel_output to intel_encoder. agp/intel: intel_845_driver is an agp driver! drm/i915: introduce to_intel_bo helper drm/i915: Disable FBC on 915GM and 945GM.
2010-04-17Merge branch 'release' of ↵Linus Torvalds1-6/+11
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: EC: Limit burst to 64 bits
2010-04-17drivers/pcmcia: Add missing local_irq_restoreJulia Lawall1-1/+3
Use local_irq_restore in this error-handling case just like in the one just below. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E1; identifier f; @@ f (...) { <+... * local_irq_save (E1,...); ... when != E1 * return ...; ...+> } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-17serial_cs: MD55x support (PCMCIA GPRS/EDGE modem) (kernel 2.6.33)Timur Maximov1-0/+9
Many PCMCIA GPRS modems like: Onda Edge N100E, Novaway PC98 (OEM SPC98Z), Rovermate Edgus Adaptmate-039 and others have same construction and identification: lspcmcia -vvv Product Name: Generic Modem: MD55x 1.00 Serial number: xxxxx-xxx Identification: manf_id: 0x015d card_id: 0x4c45 function: 2 (serial) prod_id(1): "Generic" (0xc49e4731) prod_id(2): "Modem: MD55x" (0x8913b110) prod_id(3): "1.00" (0x83dbf271) prod_id(4): "Serial number: xxxxx-xxx" (0x73ee9514) Serial connection to GSM module based on Elan VPU16551 PCMCIA UART with datasheet recommeded 14.7456MHz crystal oscillator. By default serial_cs set UART clock == 1843200 Hz For correct work need set clock 14745600 Hz. This quirk already present in driver, only need add device in quirk list. Signed-off-by: Timur Maximov <xcom.org@gmail.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-17pcmcia: avoid late calls to pccard_validate_cisDominik Brodowski1-2/+7
pccard_validate_cis() nowadays destroys the CIS cache. Therefore, calling it after card setup should be avoided. We can't control the deprecated PCMCIA ioctl (which is only used on ARM nowadays), but we can avoid -- and report -- any other calls. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-16WAN: flush tx_queue in hdlc_ppp to prevent panic on rmmod hw_driver.Krzysztof Halasa1-0/+6
tx_queue is used as a temporary queue when not allowed to queue skb directly to the hw device driver (which may sleep). Most paths flush it before returning, but ppp_start() currently cannot. Make sure we don't leave skbs pointing to a non-existent device. Thanks to Michael Barkowski for reporting this problem. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-16iwlwifi: correct 6000 EEPROM regulatory addressShanyu Zhao2-2/+6
For 6000 series, the 2.4G HT40 band regulatory settings address in EEPROM was off by 2. Before the fix, you'll see this in dmesg: [79535.788877] ieee80211 phy8: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] WIDE (0x61 0dBm): Ad-Hoc not supported [79535.788880] ieee80211 phy8: U iwl_mod_ht40_chan_info HT40 Ch. 11 [2.4GHz] WIDE (0x61 0dBm): Ad-Hoc not supported And after the fix: [91132.688706] ieee80211 phy14: U iwl_mod_ht40_chan_info HT40 Ch. 7 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported [91132.688709] ieee80211 phy14: U iwl_mod_ht40_chan_info HT40 Ch. 11 [2.4GHz] IBSS ACTIVE WIDE (0x6f 0dBm): Ad-Hoc supported Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16iwlwifi: fix scan racesJohannes Berg5-13/+23
When an internal scan is started, nothing protects the is_internal_short_scan variable which can cause crashes, cf. https://bugzilla.kernel.org/show_bug.cgi?id=15667. Fix this by making the short scan request use the mutex for locking, which requires making the request go to a work struct so that it can sleep. Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-16Merge branch 'bugzilla-15749' into releaseLen Brown1-6/+11
2010-04-16ACPI: EC: Limit burst to 64 bitsAlexey Starikovskiy1-6/+11
access_bit_width field is u8 in ACPICA, thus 256 value written to it becomes 0, causing divide by zero later. Proper fix would be to remove access_bit_width at all, just because we already have access_byte_width, which is access_bit_width / 8. Limit access width to 64 bit for now. https://bugzilla.kernel.org/show_bug.cgi?id=15749 fixes regression caused by the fix for: https://bugzilla.kernel.org/show_bug.cgi?id=14667 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-16[WATCHDOG] max63xx driver depends on ioremap()Geert Uytterhoeven1-1/+1
Correct fix for the "ioremap() causes build failure on S390" should have been a dependancy on HAS_IOMEM. So we add this dependancy also (and leave the driver in the ARM section for now). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-04-16[WATCHDOG] max63xx: be careful when disabling the watchdogMarc Zyngier1-1/+6
When shutting down the watchdog timer, special care must be taken not to overwrite other bits in the register, as it may be shared with other peripherals. For example, on the Arcom Vulcan, the register is shared between the watchdog and the PCI reset line... Signed-off-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-04-16[WATCHDOG] fixed book E watchdog period register mask.Luuk Paulussen1-1/+1
A previous fix changed the WDTP function to use the period directly, rather than subtracting from 63. However the mask generation was not changed, so the mask was coming out as 0. This patch fixes it. Signed-off-by: Luuk Paulussen <luuk.paulussen@alliedtelesis.co.nz> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 17:58:52 +0000