summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2007-08-02firewire: fw-sbp2: set correct maximum payload (fixes CardBus adapters)Stefan Richter2-2/+5
As far as I know, all CardBus FireWire 400 adapters have a maximum payload of 1024 bytes which is less than the speed-dependent limit of 2048 bytes. Fw-sbp2 has to take the host adapter's limit into account. This apparently fixes Juju's incompatibility with my CardBus cards, a NEC based card and a VIA based card. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@redhat.com>
2007-08-02ieee1394: sbp2: more correct Kconfig dependenciesStefan Richter1-1/+1
Make the option SBP2_PHYS_DMA available on all architectures where it compiles. This includes x86-64 where I runtime-tested it successfully. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-08-02ieee1394: revert "sbp2: enforce 32bit DMA mapping"Stefan Richter1-5/+0
Revert commit 0555659d63c285ceb7ead3115532e1b71b0f27a7 from 2.6.22-rc1. The dma_set_mask call somehow failed on a PowerMac G5, PPC64: http://lkml.org/lkml/2007/8/1/344 Should there ever occur a DMA mapping beyond the physical DMA range, a proper SBP-2 firmware will report transport errors. So let's leave it at that. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Tested-by: Olaf Hering <olh@suse.de>
2007-08-01Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds13-128/+85
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: scc_pata: PIO fixes piix/slc90e66: fix PIO1 handling in ->speedproc method (take 2) jmicron: PIO fixes it8213: PIO fixes (take 2) cs5535: PIO fixes cs5520: fix PIO auto-tuning in ->ide_dma_check method drivers/scsi/ide-scsi.c: kmalloc + memset conversion to kzalloc drivers/ide/arm/icside.c: kmalloc + memset conversion to kzalloc ide: eliminate warnings in ide-tape.c ide: fix runtogether printk's in cmd64x IDE driver sis5513: Add FSC Amilo A1630 PCI subvendor/dev to laptops alim15x3: Correct HP detect ide: Fix an overrun found in the CS5535 IDE driver
2007-08-01scc_pata: PIO fixesBartlomiej Zolnierkiewicz1-41/+20
* Use pio == 255 == "auto-tune" in scc_config_drive_for_dma() instead of forcing PIO4 on PIO fallback. Fix comment while at it. * Rename scc_tuneproc() to scc_tune_pio() and add scc_tuneproc() wrapper. Move finding of the best PIO mode and setting of transfer mode on the device to the new wrapper. * Fix scc_tune_chipset() to tune PIO modes. Do a small cleanup while at it. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01piix/slc90e66: fix PIO1 handling in ->speedproc method (take 2)Bartlomiej Zolnierkiewicz2-17/+15
* Don't call {piix,slc90e66}_dma_2_pio() for PIO modes in {piix,slc90e66}_tune_chipset(). * Add PIO1 handling to {piix,slc90e66}_tune_chipset(). * Bump driver version. v2: * Remove PIO modes from {piix,slc90e66}_dma_2_pio(), they are no longer needed there (Noticed by Sergei) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01jmicron: PIO fixesBartlomiej Zolnierkiewicz1-17/+4
* Set transfer mode on the device in jmicron_tuneproc(), also add pio == 255 == "auto-tune" handling. * Use jmicron_tuneproc() in jmicron_config_drive_for_dma(). * Remove no longer needed config_jmicron_chipset_for_pio(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01it8213: PIO fixes (take 2)Bartlomiej Zolnierkiewicz1-16/+17
* Rename it8213_tuneproc() to it8213_tune_pio() and add it8213_tuneproc() wrapper. Move finding of the best PIO mode to the new wrapper. * Add setting of transfer mode on the device to it8213_tuneproc(). * Don't call it8213_dma_2_pio() for PIO modes in it8213_tune_chipset(). * Use it8213_tuneproc() in it8213_config_drive_for_dma(). v2: * Remove PIO modes from it8213_dma_2_pio(), they are no longer needed there (Noticed by Sergei) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01cs5535: PIO fixesBartlomiej Zolnierkiewicz1-23/+17
* Fix cs5535_tuneproc() to pass PIO transfer mode value instead of PIO mode number to cs5535_set_speed() (fixes random PIO timings being programmed and a possible OOPS). Do a little cleanup while at it. * Fix cs5535_set_speed() to check if the mate device is present (fixes PIO0 taskfile timings being used if there is no other device on the cable). * Use cs5535_tuneproc() in cs5535_dma_check(). The old code had the same issue as cs5535_tuneproc() and add additionally caused 0x00-0x04 transfer mode values (== default PIO, default PIO w/ IORDY + two invalid values) being set on the device instead of values 0x08-0x0c (XFER_PIO_[0,4]). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01cs5520: fix PIO auto-tuning in ->ide_dma_check methodBartlomiej Zolnierkiewicz1-1/+1
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01drivers/scsi/ide-scsi.c: kmalloc + memset conversion to kzallocMariusz Kozlowski1-6/+4
drivers/scsi/ide-scsi.c | 34642 -> 34536 (-106 bytes) drivers/scsi/ide-scsi.o | 171728 -> 171524 (-204 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01drivers/ide/arm/icside.c: kmalloc + memset conversion to kzallocMariusz Kozlowski1-2/+1
Is this a bug? In original verison memset cleared sizeof(state) bytes instead of sizeof(*state). If it was intentional then this patch is invalid. If not intentional -> valid :) Please review. Bart: Yes, it is a bug so this patch is a valid bugfix. :-) drivers/ide/arm/icside.c | 18883 -> 18849 (-34 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01ide: eliminate warnings in ide-tape.cStephen Rothwell1-1/+1
drivers/ide/ide-tape.c: In function '__idetape_kmalloc_stage': drivers/ide/ide-tape.c:2588: warning: large integer implicitly truncated to unsigned type drivers/ide/ide-tape.c:2616: warning: large integer implicitly truncated to unsigned type b_size in struct idetape_bh is an unsigned short. We sometimes assigne PAGE_SIZE to it and PAGE_SIZE can be 64K or larger, so make it a u32. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01ide: fix runtogether printk's in cmd64x IDE driverMeelis Roos1-2/+2
Fix a couple of runtogether printks in cmd64x.c IDE driver by adding proper newlines. Signed-off-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01sis5513: Add FSC Amilo A1630 PCI subvendor/dev to laptopsDavid Lamparter1-0/+1
Recognise the FSC Amilo A1630's incarnation of a SiS5513 chip as laptop to get UDMA100 support. Signed-off-by: David Lamparter <equinox@diac24.net> Cc: Lionel Bouton <Lionel.Bouton@inet6.fr> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01alim15x3: Correct HP detectBartlomiej Zolnierkiewicz1-1/+1
Direct port of Alan's fix for pata_ali. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01ide: Fix an overrun found in the CS5535 IDE driverJordan Crouse1-1/+1
As found by the Coverity checker, and reported by Adrian Bunk, this fixes a overrun error in the CS5535 IDE driver. Somebody got a little excited with the if() statement - the CS5535 only supports UDMA 0-4. Bart: Not a bug per se since the upper layer will never feed this function with speed > XFER_UDMA_4 (thanks to ->ultra_mask being set to 0x1f). Worth fixing anyway. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-08-01pata_sis: fix MWDMA for <= UDMA66 chipsets and UDMA for UDMA33 chipsetsBartlomiej Zolnierkiewicz1-11/+9
* Fix MWDMA timings setup in sis_old_set_dmamode() and sis_66_set_dmamode(). The old timings were overclocked (even worse behavior than sis5513 IDE driver which depends on BIOS to program correct timings), the new timings are taken from the datasheet (they match timings from ATA spec). * Fix UDMA timings setup in sis_old_set_dmamode(). Misplaced pci_write_config_word() call resulted in UDMA timings never being set. * Fix comments for sis_133_early_set_dmamode() and sis_133_set_dmamode(): - only the former function handles early SiS 961 bridges - both functions lack MWDMA timings setup * Fix typos in sis_100_set_piomode() and sis_133_set_piomode() comments. * Bump driver version. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-01libata: blacklist SAMSUNG HD401LJ / ZZ100-15 for NCQTejun Heo1-0/+1
SAMSUNG HD401LJ / ZZ100-15 does spurious completion of NCQ commands. Disable NCQ. Reported by Ulrich in bugzilla #8805. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Ulrich <stellplatz-nr.13a@datenparkplatz.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-01ata_piix: add Tecra M3 to broken suspend blacklistTejun Heo1-0/+8
Add Tecra M3 to the broken suspend blacklist. Tecra M3 doesn't have proper DMI_PRODUCT_NAME but has an OEM_STRING instead. Match it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-01ata_piix: implement piix_borken_suspend()Tejun Heo1-30/+30
Separate out broken suspend blacklist matching into piix_broken_suspend(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-01pci: rename __pci_reenable_device() to pci_reenable_device()Tejun Heo3-8/+7
Rename __pci_reenable_device() to pci_reenable_device(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-01libata-sff; Unbreak non DMA capable controllers againAlan Cox1-0/+4
Seems nobody else is checking/testing this case as it keeps getting horked. If we have no BAR4 mapping on an SFF controller this is *NOT* an error, it just means it isn't doing BMDMA. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-01pata_cmd64x: Correct the speed rangesAlan Cox1-4/+4
I must have been half asleep when doing the original code Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds23-148/+1394
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: (28 commits) [WATCHDOG] Fix pcwd_init_module crash [WATCHDOG] ICH9 support for iTCO_wdt [WATCHDOG] 631xESB/632xESB support for iTCO_wdt - add all LPC bridges [WATCHDOG] 631xESB/632xESB support for iTCO_wdt [WATCHDOG] omap_wdt.c - default error for IOCTL is -ENOTTY [WATCHDOG] Return value of nonseekable_open [WATCHDOG] mv64x60_wdt: Rework the timeout register manipulation [WATCHDOG] mv64x60_wdt: disable watchdog timer when driver is probed [WATCHDOG] mv64x60_wdt: Support the WDIOF_MAGICCLOSE feature [WATCHDOG] mv64x60_wdt: Add a module parameter to change nowayout setting [WATCHDOG] mv64x60_wdt: Add WDIOC_SETOPTIONS ioctl support [WATCHDOG] mv64x60_wdt: Support for WDIOC_SETTIMEOUT ioctl [WATCHDOG] mv64x60_wdt: Fix WDIOC_GETTIMEOUT return value [WATCHDOG] mv64x60_wdt: Check return value of nonseekable_open [WATCHDOG] mv64x60_wdt: Add arch/powerpc platform support [WATCHDOG] mv64x60_wdt: Get register address from platform data [WATCHDOG] mv64x60_wdt: set up platform_device in platform code [WATCHDOG] ensure mouse and keyboard ignored in w83627hf_wdt [WATCHDOG] s3c2410_wdt: fixup after arch include moves [WATCHDOG] git-watchdog-typo ...
2007-07-31Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds3-7/+1
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (50 commits) [MIPS] Add smp_call_function_single() [MIPS] thread_info.h: kmalloc + memset conversion to kzalloc [MIPS] Kexec: Fix several 64-bit bugs. [MIPS] Kexec: Fix several warnings. [MIPS] DDB5477: Remove support [MIPS] Fulong: Remove unneeded header file [MIPS] Cobalt: Enable UART on RaQ1 [MIPS] Remove unused GROUP_TOSHIBA_NAMES [MIPS] remove some duplicate includes [MIPS] Oprofile: Fix rm9000 performance counter handler [MIPS] Use -Werror on subdirectories which build cleanly. [MIPS] Yosemite: Fix warning. [MIPS] PMON: Fix cpustart declaration. [MIPS] Yosemite: Only build ll_ht_smp_irq_handler() if HYPERTRANSPORT. [MIPS] Yosemite: Fix build error due to undeclared titan_mailbox_irq(). [MIPS] Yosemite: Don't declare titan_mailbox_irq() as asmlinkage. [MIPS] Yosemite: Fix warnings in i2c-yoesmite by deleting the unused code. [MIPS] Delete unused arch/mips/gt64120/common/ [MIPS] Fix build warning in unaligned load/store emulator. [MIPS] IP32: Don't ignore request_irq's return value. ...
2007-07-31Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds18-21/+478
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: hwmon: fscher read control bugfix hwmon: (adm1031) Fix broken links in documentation hwmon: make abituguru3_read_increment_offset() static hwmon: Fix regression caused by typo in lm90.c hwmon: (applesmc) add temperature sensors set for Macbook hwmon: fscher control update bugfix hwmon: fix dme1737 temp fault attribute hwmon: Add missing __devexit tags in various drivers hwmon: clean up duplicate includes hwmon: fix lm78 detection regression hwmon: fix array overruns in lm93.c hwmon: add support for THMC50 and ADM1022
2007-07-31ACPI: delete CONFIG_ACPI_PROCFS_SLEEP (again)Len Brown1-8/+0
CONFIG_ACPI_PROCFS_SLEEP is a NO-OP -- delete it (again). Apparently 296699de6bdc717189a331ab6bbe90e05c94db06 creating CONFIG_SUSPEND and CONFIG_PM_SLEEP was based on an out-dated version of drivers/acpi/Kconfig, as it erroneously restored this recently deleted config option. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31Merge branch 'master' of ↵Linus Torvalds30-118/+42
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (41 commits) [RTNETLINK]: Fix warning for !CONFIG_KMOD [IPV4] ip_options.c: kmalloc + memset conversion to kzalloc [DECNET]: kmalloc + memset conversion to kzalloc [NET]: ethtool_perm_addr only has one implementation [NET]: ethtool ops are the only way [PPPOE]: Improve hashing function in hash_item(). [XFRM]: State selection update to use inner addresses. [IPSEC]: Ensure that state inner family is set [TCP]: Bidir flow must not disregard SACK blocks for lost marking [TCP]: Fix ratehalving with bidirectional flows [PPPOL2TP]: Add CONFIG_INET Kconfig dependency. [NET]: Page offsets and lengths need to be __u32. [AF_UNIX]: Make code static. [NETFILTER]: Make nf_ct_ipv6_skip_exthdr() static. [PKTGEN]: make get_ipsec_sa() static and non-inline [PPPoE]: move lock_sock() in pppoe_sendmsg() to the right location [PPPoX/E]: return ENOTTY on unknown ioctl requests [IPV6]: ipv6_addr_type() doesn't know about RFC4193 addresses. [NET]: Fix prio_tune() handling of root qdisc. [NET]: Fix sch_api to properly set sch->parent on the root. ...
2007-07-31Merge branch 'master' of ↵Linus Torvalds3-34/+28
master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [BBC_I2C]: kmalloc + memset conversion to kzalloc [BBC_ENVCTRL]: kmalloc + memset conversion to kzalloc [SPARC]: Fix exec failures on sun4c. [SPARC] Videopix Frame Grabber: Fix unreleased lock in vfc_debug() [SPARC64]: Add missing dma_get_cache_alignment(). [SUNLANCE]: Fix sparc32 crashes by using of_*() interfaces.
2007-07-31rtc-m48t59 driver NO_IRQ mode fixupMark Zhan1-1/+1
Since irq in m48t59_private struct is defined as 'unsigned int', which will make the following if sentence to be never true: if (m48t59->irq < 0) m48t59->irq = NO_IRQ; And thus it will make the m48t59_rtc_probe() is failed when the driver is working in a no irq mode: Signed-off-by: Mark Zhan <rongkai.zhan@windriver.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31Use menuconfig objects: RTCJan Engelhardt1-47/+31
Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31Remove 'isdn_* is defined but unused' warningsCharlie Shepherd1-2/+2
Move the #ifdef guard above these functions to remove the warnings. Signed-off-by: Charlie Shepherd <masterdriverz@gentoo.org> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31spi device setup gets better error checkingDavid Brownell1-15/+30
This updates some error reporting paths in SPI device setup: - Move validation logic for SPI chipselects to spi_new_device(), which is where it should always have been. - In spi_new_device(), emit error messages if the device can't be created. This is LOTS better than a silent failure; though eventually, the calling convention should probably change to use the <linux/err.h> conventions. - Includes one previously-missing check: SPI masters must always have at least one chipselect, even for dedicated busses which always keep it selected! It also adds a FIXME (IDR for dynamic ID allocation) so the issue doesn't live purely in my mailbox. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31fix integer overflow warning in i2o_blockMeelis Roos1-1/+1
drivers/message/i2o/i2o_block.c: In function 'i2o_block_transfer': drivers/message/i2o/i2o_block.c:837: warning: integer overflow in expression msg->u.head[1] = cpu_to_le32(I2O_CMD_PRIVATE << 24 | HOST_TID << 12 | tid); and I2O_CMD_PRIVATE is defined as 0xFF. This gets "0xFF0100 | tid" and fits into 32-bit unsigned but not into 32-bit signed integer properly. Target value is defined as u32 so the claculation does not fit during computation. Change local variable tid to u32 so the whole expression is of u32 type and fits well into u32 result. Signed-off-by: Meelis Roos <mroos@linux.ee> Cc: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31ip2main warning fixAndrew Morton1-1/+2
CONFIG_PCI=n: drivers/char/ip2/ip2main.c: In function `ip2_loadmain': drivers/char/ip2/ip2main.c:503: warning: unused variable `status' Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31cciss: fix memory leakJesper Juhl1-1/+4
There's a memory leak in the cciss driver. in alloc_cciss_hba() we may leak sizeof(ctlr_info_t) bytes if a call to alloc_disk(1 << NWD_SHIFT) fails. This patch should fix the issue. Spotted by the Coverity checker. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31Videopix Frame Grabber: Fix unreleased lock in vfc_debug()Matthias Kaehlcke1-0/+1
Videopix Frame Grabber: vfc_debug() doesn't release the device lock when copy_from_user() fails Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Acked-by: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31sb1250-duart: __maybe_unused, etc. fixesMaciej W. Rozycki1-8/+6
This is a set of small fixes addressing points raised with the original driver submission. In particular, __maybe_unused is used rather than a local hack and sbd_ops is made const. Additionally I have made two local string variables automatic as rodata space was wasted for pointers unnecessarily. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31Typo fixes errror -> errorGabriel Craciunescu2-3/+3
Typo fixes errror -> error Signed-off-by: Gabriel Craciunescu <nix.or.die@googlemail.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31ipmi: Fix mem leak in try_init_dmi()Jesper Juhl1-0/+1
This is only called at init time and only happens if the BIOS screws something up, so the leak is slight and it is probably not worth sending to 2.6.22.x. The driver would not initialize the interface in the case, and I have no reports of this happening. I have booted and run tests on a system with this patch. Note that the original patch was munged by the mailer, here's a new one. If we ever hit the "default:" case in the switch in try_init_dmi(), then we'll leak the storage allocated with kzalloc() and assigned to 'info'. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31serial: MPSC: Fix coding style and whitespace issuesMark A. Greer1-401/+283
Fix up mpsc.c to be aligned with Documentation/CodingStyle. Also fix up some whitespace issues. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31serial: MPSC: Remove duplicate SUPPORT_SYSRQ definitionMark A. Greer1-4/+0
Remove the duplicate definition of SUPPORT_SYSRQ in mpsc driver. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31serial: MPSC: Stop rx engine when CREAD clearedStephane Chazelas1-5/+8
Currently, the MPSC driver doesn't stop recieving characters when the CREAD flag in termios->c_cflag is cleared. It should. Also, only start receiving if its not already started. Signed-off-by: Stephane Chazelas <stephane@artesyncp.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31serial: MPSC: Remove race between Rx stop & restartCarlos Sanchez1-2/+14
The patch in commit ID f7232056bff5fe2d3bfeab35252a66ebaeb5bbde stops (aborts) the MPSC's receive engine just before restarting it. Unfortunately, it doesn't wait for the abort to complete before restarting it which creates a race between the abort and the restart. If the restart occurs first, the in-progress abort stops it again and the rx engine remains stopped. Instead, do the abort when the SDMA engine is being stopped. Make sure to wait for the abort to complete before continuing. Signed-off-by: Carlos Sanchez <carlos.sanchez@gecoinc.com> Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31remove tx3912fbYoichi Yuasa3-339/+0
Remove tx3912fb. Nino has already removed. It is no longer needed. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31serial: fix vr41xx_siu serial console supportYoichi Yuasa2-1/+3
The serial console can select only SERIAL_VR41XX=y. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31serial: fix vr41xx_siu interface selectYoichi Yuasa1-1/+2
only PORT_VR41XX_SIU can select interface. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31serial: fix section mismatch vr41xx_siuYoichi Yuasa1-1/+1
Fix section mismatch vr41xx_siu. WARNING: drivers/built-in.o(.text+0x2ce4c): Section mismatch: reference to .init.text:uart_parse_options (between 'siu_console_setup' and 'siu_request_port') WARNING: drivers/built-in.o(.text+0x2ce70): Section mismatch: reference to .init.text:uart_set_options (between 'siu_console_setup' and 'siu_request_port') Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31in-string typos of "error"Eddy L O Jansson2-2/+2
One patch for two trivial typos of 'error' with three R's, appearing in message strings. There's a bunch more of the same in comments, not dealt with here. Signed-off-by: Eddy L O Jansson <eddy@klopper.net> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 19:03:38 +0000