summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-07-24[S390] ap: toleration support for ap device type 10Holger Dengler2-27/+91
Add toleration support for ap devices with device type 10. Signed-off-by: Holger Dengler <hd@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24[S390] qdio: clear shared DSCI before scheduling the queue handlerJan Glauber1-10/+5
The following race can occur with qdio devices that use the shared device state change indicator: Device (Shared DSCI) CPU0 CPU1 =============================================================================== 1. DSCI 0 => 1, INT pending 2. Thinint handler * si_used = 1 * Inbound tasklet_schedule * DSCI 1 => 0 3. DSCI 0 => 1, INT pending 4. Thinint handler * si_used = 1 * Inbound tasklet_schedu le => NOP 5. Inbound tasklet run 6. DSCI = 1, INT surpressed 7. DSCI 1 => 0 The race would lead to a stall where new data in the input queue is not recognized so the device stops working in case of no further traffic. Fix the race by resetting the DSCI before scheduling the inbound tasklet so the device generates an interrupt if new data arrives in the above scenario in step 6. Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-24[S390] kconfig: remove tape interface support commentMartin Schwidefsky1-3/+0
There is nothing below the menu entry "S/390 tape interface support". Remove it. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-07-23of: fix missing include from of_pci.cGrant Likely1-0/+1
of_pci.c references symbols from linux/of.h. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-23via-velocity: remove duplicated #includeHuang Weiyi1-1/+0
Remove duplicated #include('s) in drivers/net/via-velocity.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-23qlge: remove duplicated #includeHuang Weiyi1-1/+0
Remove duplicated #include('s) in drivers/net/qlge/qlge_main.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-23igb: remove duplicated #includeHuang Weiyi1-1/+0
Remove duplicated #include('s) in drivers/net/igb/igb_main.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-23can: c_can: remove duplicated #includeHuang Weiyi2-2/+0
Remove duplicated #include('s) in drivers/net/can/c_can/c_can.c drivers/net/can/c_can/c_can_platform.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-23bnad: remove duplicated #includeHuang Weiyi1-1/+0
Remove duplicated #include('s) in drivers/net/bna/bnad.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-23ata: PATA_ARASAN_CF depends on DMADEVICESRandy Dunlap1-0/+1
Fix kconfig unmet dependency warning: warning: (PATA_ARASAN_CF && VIDEO_TIMBERDALE && SND_SOC_SH4_SIU) selects DMA_ENGINE which has unmet direct dependencies (DMADEVICES) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23ata: remove unnecessary codeGreg Dietsche1-7/+1
Compile tested. remove unnecessary code that matches this coccinelle pattern if (...) return ret; return ret; Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23[libata] Prevent warning during PMP error recoveryGwendal Grignou1-0/+1
Cleanup sff_pio_task_link when a command is cancel while the pio_task thread has been scheduled. Signed-off-by: Gwendal Grignou <gwendal@google.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23ahci: RAID-mode SATA patch for Intel Panther Point DeviceIDsSeth Heasley1-0/+1
This patch adds an additional SATA RAID controller DeviceID for the Intel Panther Point PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23pata_it821x: Fix RAID type display, by adding missing commaJean Delvare1-1/+1
The missing comma causes the wrong RAID type to be displayed. Introduced by commit 963e4975c6f93c148ca809d986d412201df9af89 three years ago, odd that nobody noticed before. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23sata_dwc_460ex: fix error pathVasiliy Kulikov1-7/+14
Fixed hsdev memleak on sata_dwc_probe() error. As dma_dwc_exit() can be called multiple times without sata_dma_regs and irq_dma changes, it might lead to double free on sequential dma_dwc_exit() calls. So, zero these fields after free calls. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23ahci: Enable SB600 64bit DMA on Asus M3AMark Nelson1-0/+12
Like e65cc194f7628ecaa02462f22f42fb09b50dcd49 this patch enables 64bit DMA for the AHCI SATA controller of a board that has the SB600 southbridge. In this case though we're enabling 64bit DMA for the Asus M3A motherboard. It is a new enough board that all of the BIOS releases since the initial release (0301 from 2007-10-22) work correctly with 64bit DMA enabled. Signed-off-by: Mark Nelson <mdnelson8@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23libata: report link resume failure as KERN_WARNING instead of ERRTejun Heo1-1/+1
Link resume failure in itself isn't an error condition and may happen regularly depending on hardware configuration. Reporting it as KERN_ERR makes the condition unnecessarily prominent (e.g. reported during boot). Use KERN_WARNING instead. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: David Shaw <dshaw@jabberwocky.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23ahci: move ahci_sb600_softreset to libahci.c and rename itYuan-Hsin Chen3-58/+60
ahci_sb600_softreset was in ahci.c. This function is used to fix soft reset failure and renames as ahci_pmp_retry_softreset in libahci.c. Signed-off-by: Yuan-Hsin Chen <yhchen@faraday-tech.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23libata: leave port thawed after reset failureTejun Heo1-1/+10
libata EH intentionally left a port frozen if it failed ata_eh_reset(). The intention was avoiding continuous loop of resets when the controller or attached device is flaky and reporting spurious hotplug events. Once port enters this state, it can be recovered with manual rescan, which seemed reasonable. However, outside of my convoluted test setup, there have been very few reports justifying this choice while there have been more cases where the automatic freezing of the port after hotplug attempt of a faulty device caused confusion and led to unnecessary resets. This patch changes the behavior so that the port is thawed after reset failure. This change doesn't necessarily solve but makes it easier and more intuitive to work around hotplug related problems (ie. re-pluggin or power cycling the device) as reported in the followings. https://bugzilla.kernel.org/show_bug.cgi?id=34712 http://thread.gmane.org/gmane.linux.kernel/1123265/focus=49548 Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Reartes Guillermo <rtguille@gmail.com> Reported-by: Bruce Stenning <b.stenning@indigovision.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23ata: sata_via: Use dev_dbgJoe Perches1-9/+7
Use normal debugging path for dynamic debug capability. Convert dev_printk(KERN_DEBUG to dev_dbg( Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23ata: Add and use ata_print_version_onceJoe Perches42-133/+51
Use a single mechanism to show driver version. Reduces text a tiny bit too. Remove uses of static int printed_version Add and use ata_print_version(const struct device *, const char *ver) and ata_print_version_once. $ size drivers/ata/built-in.* text data bss dec hex filename 544969 73893 116584 735446 b38d6 drivers/ata/built-in.allyesconfig.ata.o 543870 73893 116592 734355 b34ad drivers/ata/built-in.allyesconfig.print_once.o 141328 14689 4220 160237 271ed drivers/ata/built-in.defconfig.ata.o 141212 14689 4220 160121 27179 drivers/ata/built-in.defconfig.print_once.o Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23ata: Convert ata_<foo>_printk(KERN_<LEVEL> to ata_<foo>_<level>Joe Perches31-521/+526
Saves text by removing nearly duplicated text format strings by creating ata_<foo>_printk functions and printf extension %pV. ata defconfig size shrinks ~5% (~8KB), allyesconfig ~2.5% (~13KB) Format string duplication comes from: #define ata_link_printk(link, lv, fmt, args...) do { \ if (sata_pmp_attached((link)->ap) || (link)->ap->slave_link) \ printk("%sata%u.%02u: "fmt, lv, (link)->ap->print_id, \ (link)->pmp , ##args); \ else \ printk("%sata%u: "fmt, lv, (link)->ap->print_id , ##args); \ } while(0) Coalesce long formats. $ size drivers/ata/built-in.* text data bss dec hex filename 544969 73893 116584 735446 b38d6 drivers/ata/built-in.allyesconfig.ata.o 558429 73893 117864 750186 b726a drivers/ata/built-in.allyesconfig.dev_level.o 141328 14689 4220 160237 271ed drivers/ata/built-in.defconfig.ata.o 149567 14689 4220 168476 2921c drivers/ata/built-in.defconfig.dev_level.o Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23ata: Convert dev_printk(KERN_<LEVEL> to dev_<level>(Joe Perches27-230/+189
Saves a bit of text as the call takes fewer args. Coalesce a few formats. Convert a few bare printks to pr_cont. $ size drivers/ata/built-in.o* text data bss dec hex filename 558429 73893 117864 750186 b726a drivers/ata/built-in.o.allyesconfig.new 559574 73893 117888 751355 b76fb drivers/ata/built-in.o.allyesconfig.old 149567 14689 4220 168476 2921c drivers/ata/built-in.o.defconfig.new 149851 14689 4220 168760 29338 drivers/ata/built-in.o.defconfig.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-07-23Merge branch 'for-linus' of ↵Linus Torvalds9-70/+689
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regulator: Convert tps65023 to use regmap API regmap: Add SPI bus support regmap: Add I2C bus support regmap: Add generic non-memory mapped register access API
2011-07-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds89-3180/+13262
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (77 commits) [SCSI] fix crash in scsi_dispatch_cmd() [SCSI] sr: check_events() ignore GET_EVENT when TUR says otherwise [SCSI] bnx2i: Fixed kernel panic due to illegal usage of sc->request->cpu [SCSI] bfa: Update the driver version to 3.0.2.1 [SCSI] bfa: Driver and BSG enhancements. [SCSI] bfa: Added support to query PHY. [SCSI] bfa: Added HBA diagnostics support. [SCSI] bfa: Added support for flash configuration [SCSI] bfa: Added support to obtain SFP info. [SCSI] bfa: Added support for CEE info and stats query. [SCSI] bfa: Extend BSG interface. [SCSI] bfa: FCS bug fixes. [SCSI] bfa: DMA memory allocation enhancement. [SCSI] bfa: Brocade-1860 Fabric Adapter vHBA support. [SCSI] bfa: Brocade-1860 Fabric Adapter PLL init fixes. [SCSI] bfa: Added Fabric Assigned Address(FAA) support [SCSI] bfa: IOC bug fixes. [SCSI] bfa: Enable ASIC block configuration and query. [SCSI] bnx2i: Updated copyright and bump version [SCSI] bnx2i: Modified to skip CNIC registration if iSCSI is not supported ... Fix up some trivial conflicts in: - drivers/scsi/bnx2fc/{bnx2fc.h,bnx2fc_fcoe.c}: Crazy broadcom version number conflicts - drivers/target/tcm_fc/tfc_cmd.c Just trivial cleanups done on adjacent lines
2011-07-23Merge branch 'timers-clocksource-for-linus' of ↵Linus Torvalds3-0/+405
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-clocksource-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: clocksource: apb: Share APB timer code with other platforms
2011-07-23Merge branch 'scsi-fixes'James Bottomley240-1455/+25703
2011-07-23regulator: Convert tps65023 to use regmap APIMark Brown2-70/+28
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-23regmap: Add SPI bus supportMark Brown3-1/+77
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-23regmap: Add I2C bus supportMark Brown3-0/+120
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-23regmap: Add generic non-memory mapped register access APIMark Brown5-0/+465
There are many places in the tree where we implement register access for devices on non-memory mapped buses, especially I2C and SPI. Since hardware designers seem to have settled on a relatively consistent set of register interfaces this can be effectively factored out into shared code. There are a standard set of formats for marshalling data for exchange with the device, with the actual I/O mechanisms generally being simple byte streams. We create an abstraction for marshaling data into formats which can be sent on the control interfaces, and create a standard method for plugging in actual transport underneath that. This is mostly a refactoring and renaming of the bottom level of the existing code for sharing register I/O which we have in ASoC. A subsequent patch in this series converts ASoC to use this. The main difference in interface is that reads return values by writing to a location provided by a pointer rather than in the return value, ensuring we can use the full range of the type for register data. We also use unsigned types rather than ints for the same reason. As some of the devices can have very large register maps the existing ASoC code also contains infrastructure for managing register caches. This cache work will be moved over in a future stage to allow for separate review, the current patch only deals with the physical I/O. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-23virtio: expose for non-virtualization users tooOhad Ben-Cohen2-0/+5
virtio has been so far used only in the context of virtualization, and the virtio Kconfig was sourced directly by the relevant arch Kconfigs when VIRTUALIZATION was selected. Now that we start using virtio for inter-processor communications, we need to source the virtio Kconfig outside of the virtualization scope too. Moreover, some architectures might use virtio for both virtualization and inter-processor communications, so directly sourcing virtio might yield unexpected results due to conflicting selections. The simple solution offered by this patch is to always source virtio's Kconfig in drivers/Kconfig, and remove it from the appropriate arch Kconfigs. Additionally, a virtio menu entry has been added so virtio drivers don't show up in the general drivers menu. This way anyone can use virtio, though it's arguably less accessible (and neat!) for virtualization users now. Note: some architectures (mips and sh) seem to have a VIRTUALIZATION menu merely for sourcing virtio's Kconfig, so that menu is removed too. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-07-22Merge branch 'for-linus' of ↵Linus Torvalds13-175/+259
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (107 commits) vfs: use ERR_CAST for err-ptr tossing in lookup_instantiate_filp isofs: Remove global fs lock jffs2: fix IN_DELETE_SELF on overwriting rename() killing a directory fix IN_DELETE_SELF on overwriting rename() on ramfs et.al. mm/truncate.c: fix build for CONFIG_BLOCK not enabled fs:update the NOTE of the file_operations structure Remove dead code in dget_parent() AFS: Fix silly characters in a comment switch d_add_ci() to d_splice_alias() in "found negative" case as well simplify gfs2_lookup() jfs_lookup(): don't bother with . or .. get rid of useless dget_parent() in btrfs rename() and link() get rid of useless dget_parent() in fs/btrfs/ioctl.c fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlers drivers: fix up various ->llseek() implementations fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek Ext4: handle SEEK_HOLE/SEEK_DATA generically Btrfs: implement our own ->llseek fs: add SEEK_HOLE and SEEK_DATA flags reiserfs: make reiserfs default to barrier=flush ... Fix up trivial conflicts in fs/xfs/linux-2.6/xfs_super.c due to the new shrinker callout for the inode cache, that clashed with the xfs code to start the periodic workers later.
2011-07-22Merge branch 'x86-vdso-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86-64, vdso: Do not allocate memory for the vDSO clocksource: Change __ARCH_HAS_CLOCKSOURCE_DATA to a CONFIG option x86, vdso: Drop now wrong comment Document the vDSO and add a reference parser ia64: Replace clocksource.fsys_mmio with generic arch data x86-64: Move vread_tsc and vread_hpet into the vDSO clocksource: Replace vread with generic arch data x86-64: Add --no-undefined to vDSO build x86-64: Allow alternative patching in the vDSO x86: Make alternative instruction pointers relative x86-64: Improve vsyscall emulation CS and RIP handling x86-64: Emulate legacy vsyscalls x86-64: Fill unused parts of the vsyscall page with 0xcc x86-64: Remove vsyscall number 3 (venosys) x86-64: Map the HPET NX x86-64: Remove kernel.vsyscall64 sysctl x86-64: Give vvars their own page x86-64: Document some of entry_64.S x86-64: Fix alignment of jiffies variable
2011-07-22Merge branch 'for-davem' of ↵David S. Miller151-5998/+6594
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-07-22bna: Header File ConsolidationRasesh Mody6-87/+69
Change details: - Consolidated bfa_sm.h and bfa_wc.h into bfa_cs.h Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22bna: HW Error Counter FixRasesh Mody3-0/+6
Change details: - Heartbeat failure counter is not incrementing under some scenarios. Update hbfails and hb_count stats during hwerror event. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22bna: Add HW Semaphore Unlock LogicRasesh Mody2-0/+31
Change details: - Added logic to unlock hw semaphore if the previos FW boot was from boot code (flash based) and the current FW initialization attempt is from OS driver. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22bna: IOC Event Name ChangeRasesh Mody1-10/+10
Change details: - Changed event name IOC_E_PFAILED to IOC_E_PFFAILED Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22bna: Mboxq Flush When IOC DisabledRasesh Mody1-3/+4
Change details: - If there is a command pending in the mailbox, bfa_ioc_mbox_queue() enqueues the mailbox command to a pending command queue. Entries in this queue are not flushed when IOC is disabled. As a result, when IOC is re-enabled again, the stale entries in the pending command queue are posted to the mailbox. When these mailbox commands are processed by the FW and responses are sent, unexpected events are received by other modules' FSMs (f.e. bfa_msgq) which have not posted any mailbox commands after IOC was enabled. - Flush the pending mailbox command queue when IOC is disabled. Rename bfa_ioc_mbox_hbfail to bfa_ioc_mbox_flush. Call bfa_ioc_mbox_flush from bfa_iocpf_sm_disabled_entry() Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22bna: Minor IRQ Index and Definition ChangeRasesh Mody2-9/+13
Change details: - Always set mbox irq index to zero and make corresponding changes in mbox irq alloc/sync function and txrx irq index calculation. Add definition of BNAD_INTX_TX_IB_BITMASK & BNAD_INTX_RX_IB_BITMASK and update bnad_txrx_irq_alloc accordingly. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22bna: State Machine Fault Handling CleanupRasesh Mody4-64/+64
Chnage details: - The module name is not used in case of state machine fault, hence no longer passing the module name to the fault handler. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22bna: IOC Event Notification EnhancementRasesh Mody4-54/+99
Change details: - Replace IOC HB failure event notification with a more generic mechanism that is capable of sending enble, disable, and failed events to registered modules. As a result, cee module event handling callback bfa_cee_hbfail() is replaced with bfa_cee_notify() so that it can receive and handle different events from IOC. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22bna: CheckPatch CleanupRasesh Mody13-215/+215
Change details: - Driver cleanup as per new checkpatch v0.31 Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22bna: Print Driver VersionRasesh Mody1-1/+2
Change details: - Print the dirver version when module is loaded. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22sbni: use pci_dev->subsystem_deviceSergei Shtylyov1-4/+1
The driver reads PCI subsystem ID from the PCI configuration register while it's already stored by the PCI subsystem in the 'subsystem_device' field of 'struct pci_dev'... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22r8169: use pci_dev->subsystem_{vendor|device}Sergei Shtylyov1-5/+2
The driver reads PCI subsystem IDs from the PCI configuration registers while they are already stored by the PCI subsystem in the 'subsystem_{vendor|device}' fields of 'struct pci_dev'... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22Merge branch 'timers-rtc-for-linus' of ↵Linus Torvalds3-79/+86
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-rtc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Serialize EFI time accesses on rtc_lock x86: Serialize SMP bootup CMOS accesses on rtc_lock rtc: stmp3xxx: Remove UIE handlers rtc: stmp3xxx: Get rid of mach-specific accessors rtc: stmp3xxx: Initialize drvdata before registering device rtc: stmp3xxx: Port stmp-functions to mxs-equivalents rtc: stmp3xxx: Restore register definitions rtc: vt8500: Use define instead of hardcoded value for status bit
2011-07-22Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-17/+48
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: time: Fix stupid KERN_WARN compile issue rtc: Avoid accumulating time drift in suspend/resume time: Avoid accumulating time drift in suspend/resume time: Catch invalid timespec sleep values in __timekeeping_inject_sleeptime
2011-07-22Merge branch 'timers-cleanup-for-linus' of ↵Linus Torvalds7-20/+120
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: mips: Fix i8253 clockevent fallout i8253: Cleanup outb/inb magic arm: Footbridge: Use common i8253 clockevent mips: Use common i8253 clockevent x86: Use common i8253 clockevent i8253: Create common clockevent implementation i8253: Export i8253_lock unconditionally pcpskr: MIPS: Make config dependencies finer grained pcspkr: Cleanup Kconfig dependencies i8253: Move remaining content and delete asm/i8253.h i8253: Consolidate definitions of PIT_LATCH x86: i8253: Consolidate definitions of global_clock_event i8253: Alpha, PowerPC: Remove unused asm/8253pit.h alpha: i8253: Cleanup remaining users of i8253pit.h i8253: Remove I8253_LOCK config i8253: Make pcsp sound driver use the shared i8253_lock i8253: Make pcspkr input driver use the shared i8253_lock i8253: Consolidate all kernel definitions of i8253_lock i8253: Unify all kernel declarations of i8253_lock i8253: Create linux/i8253.h and use it in all 8253 related files
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-24 04:07:32 +0000