summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2008-03-02firewire: fix crash in automatic module unloadingStefan Richter5-18/+35
"modprobe firewire-ohci; sleep .1; modprobe -r firewire-ohci" used to result in crashes like this: BUG: unable to handle kernel paging request at ffffffff8807b455 IP: [<ffffffff8807b455>] PGD 203067 PUD 207063 PMD 7c170067 PTE 0 Oops: 0010 [1] PREEMPT SMP CPU 0 Modules linked in: i915 drm cpufreq_ondemand acpi_cpufreq freq_table applesmc input_polldev led_class coretemp hwmon eeprom snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss button thermal processor sg snd_hda_intel snd_pcm snd_timer snd snd_page_alloc sky2 i2c_i801 rtc [last unloaded: crc_itu_t] Pid: 9, comm: events/0 Not tainted 2.6.25-rc2 #3 RIP: 0010:[<ffffffff8807b455>] [<ffffffff8807b455>] RSP: 0018:ffff81007dcdde88 EFLAGS: 00010246 RAX: ffff81007dc95040 RBX: ffff81007dee5390 RCX: 0000000000005e13 RDX: 0000000000008c8b RSI: 0000000000000001 RDI: ffff81007dee5388 RBP: ffff81007dc5eb40 R08: 0000000000000002 R09: ffffffff8022d05c R10: ffffffff8023b34c R11: ffffffff8041a353 R12: ffff81007dee5388 R13: ffffffff8807b455 R14: ffffffff80593bc0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffffff8055a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: ffffffff8807b455 CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process events/0 (pid: 9, threadinfo ffff81007dcdc000, task ffff81007dc95040) Stack: ffffffff8023b396 ffffffff88082524 0000000000000000 ffffffff8807d9ae ffff81007dc5eb40 ffff81007dc9dce0 ffff81007dc5eb40 ffff81007dc5eb80 ffff81007dc9dce0 ffffffffffffffff ffffffff8023be87 0000000000000000 Call Trace: [<ffffffff8023b396>] ? run_workqueue+0xdf/0x1df [<ffffffff8023be87>] ? worker_thread+0xd8/0xe3 [<ffffffff8023e917>] ? autoremove_wake_function+0x0/0x2e [<ffffffff8023bdaf>] ? worker_thread+0x0/0xe3 [<ffffffff8023e813>] ? kthread+0x47/0x74 [<ffffffff804198e0>] ? trace_hardirqs_on_thunk+0x35/0x3a [<ffffffff8020c008>] ? child_rip+0xa/0x12 [<ffffffff8020b6e3>] ? restore_args+0x0/0x3d [<ffffffff8023e68a>] ? kthreadd+0x14c/0x171 [<ffffffff8023e68a>] ? kthreadd+0x14c/0x171 [<ffffffff8023e7cc>] ? kthread+0x0/0x74 [<ffffffff8020bffe>] ? child_rip+0x0/0x12 Code: Bad RIP value. RIP [<ffffffff8807b455>] RSP <ffff81007dcdde88> CR2: ffffffff8807b455 ---[ end trace c7366c6657fe5bed ]--- Note that this crash happened _after_ firewire-core was unloaded. The shared workqueue tried to run firewire-core's device initialization jobs or similar jobs. The fix makes sure that firewire-ohci and hence firewire-core is not unloaded before all device shutdown jobs have been completed. This is determined by the count of device initializations minus device releases. Also skip useless retries in the node initialization job if the node is to be shut down. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jarod Wilson <jwilson@redhat.com>
2008-03-02firewire: potentially invalid pointers used in fw_card_bm_workStefan Richter2-17/+35
The bus management workqueue job was in danger to dereference NULL pointers. Also, after having temporarily lifted card->lock, a few node pointers and a device pointer may have become invalid. Add NULL pointer checks and get the necessary references. Also, move card->local_node out of fw_card_bm_work's sight during shutdown of the card. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jarod Wilson <jwilson@redhat.com>
2008-03-02firewire: fw-sbp2: better fix for NULL pointer dereference in scsi_remove_deviceStefan Richter1-19/+27
Patch "firewire: fw-sbp2: fix NULL pointer deref. in scsi_remove_device" had the unintended effect that firewire-sbp2 could not be unloaded anymore until all SBP-2 devices were unplugged. We now fix the NULL pointer bug by reacquiring a reference to the sdev instead of holding a reference to the sdev (and to the module) all the time. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Tested-by: Jarod Wilson <jwilson@redhat.com>
2008-02-29Merge branch 'upstream-linus' of ↵Linus Torvalds2-14/+73
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] wrap kmap_atomic(KM_IRQ0) with local_irq_save/restore() sata_svw: Add support for HT1100 SATA controller
2008-02-29[libata] wrap kmap_atomic(KM_IRQ0) with local_irq_save/restore()Jeff Garzik1-0/+10
Interrupts must be disabled if using kmap_atomic(KM_IRQ0), but that was not the case in a few code paths coming directly from ATA driver interrupt handlers (which use spin_lock rather than spin_lock_irqsave). Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-02-29Merge branch 'for-linus' of ↵Linus Torvalds2-148/+139
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (35 commits) Blackfin Serial Driver: Fix bug - Only insert UART rx char in timer task. Blackfin Serial Driver: Fix bug - update tx dma buffer tail before wake up processes. Blackfin Serial Driver: Fix bug - Increase buffer tail immediately before starting tx dma. [Blackfin] serial driver: Add flow control support to bf54x [Blackfin] serial driver: Fix bug Poll RTS/CTS status in DMA mode as well [Blackfin] serial driver: ADSP-BF52x arch/mach support [Blackfin] serial driver: use simpler comment headers and strip out information that is maintained in the scm's log [Blackfin] serial driver: rework break flood anomaly handling to be more robust/realistic about what we can actually work around [Blackfin] serial driver: fix bug - cache the bits of the LSR on systems where the LSR is read-to-clear [Blackfin] serial driver: fix bug - should not wait for the TFI bit, just clear it when tx stop. [Blackfin] serial driver: Fix bug serial driver in DMA mode spams history to console on shell restart [Blackfin] serial driver: Fix bug Free rx dma buffer in shutdown. [Blackfin] serial driver: Clean up UART DMA code. Blackfin Serial driver: Fix bug - serial driver in PIO mode cant handle input very quickly [Blackfin] arch: kill section mismatch warnings [Blackfin] arch: handle the most common L1 shrinkage case (L1 does not exist for a part) so that any parts labeled for L1 instead get placed into external memory sections [Blackfin] arch: add bfin_clear_PPIx_STATUS() helper funcs like we have for other parts [Blackfin] arch: make sure we have proper description/copyright/license lines [Blackfin] arch: Fix CONFIG_PM support for BF561 [Blackfin] arch: Remove DPMC char driver option ...
2008-02-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds2-24/+44
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: arch/sh/drivers/dma/dma-sh.c: Correct use of ! and & serial: Move asm-sh/sci.h to linux/serial_sci.h. sh: Fix up HAS_SR_RB typo in entry-macros. maple: fix device detection sh: fix rtc_resources setup for sh770x sh: heartbeat: ioremap is expected to succeed sh: Storage class should be before const qualifier maple: remove unused variable sh: SH5-103 needs to select CPU_SH5. sh: Rename SH-3 CCR3 reg to avoid synclink_cs clash.
2008-02-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds54-1439/+2912
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (79 commits) [X25]: Use proc_create() to setup ->proc_fops first [WANROUTER]: Use proc_create() to setup ->proc_fops first [8021Q]: Use proc_create() to setup ->proc_fops first [IPV4]: Use proc_create() to setup ->proc_fops first [IPV6]: Use proc_create() to setup ->proc_fops first [SCTP]: Use proc_create() to setup ->proc_fops first [PKTGEN]: Use proc_create() to setup ->proc_fops first [NEIGHBOUR]: Use proc_create() to setup ->proc_fops first [LLC]: Use proc_create() to setup ->proc_fops first [IPX]: Use proc_create() to setup ->proc_fops first [SUNRPC]: Use proc_create() to setup ->proc_fops first [ATM]: Use proc_create() to setup ->proc_fops first [SCTP]: Update AUTH structures to match declarations in draft-16. [SCTP]: Incorrect length was used in SCTP_*_AUTH_CHUNKS socket option [SCTP]: Clean up naming conventions of sctp protocol/address family registration [APPLETALK]: Use proc_create() to setup ->proc_fops first [BNX2X]: add bnx2x to MAINTAINERS [BNX2X]: update version, remove CVS strings [BNX2X]: Fix Xmit bugs [BNX2X]: Prevent PCI queue overflow ...
2008-02-29Merge branch 'for-linus' of ↵Linus Torvalds7-30/+37
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: MAINTAINERS: neteffect update RDMA/nes: Fix interrupt moderation low threshold RDMA/nes: Fix CRC endianness for RDMA connection establishment on big-endian RDMA/nes: Fix use-after-free in mini_cm_dec_refcnt_listen() RDMA/nes: Fix use-after-free in nes_create_cq() RDMA/nes: Fix a check-after-use in nes_probe() RDMA/nes: Fix a memory leak in schedule_nes_timer() RDMA/nes: Fix off-by-one RDMA/nes: Resurrect error path dead code RDMA/cxgb3: Fix shift calc in build_phys_page_list() for 1-entry page lists
2008-02-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds9-129/+44
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: remove stale comments from ide-dma.c (take 2) ide: remove ide-tape documentation from Documentation/ide.txt qd65xx: remove commented out code ide-tape: schedule driver for removal after 6 months ide-disk: add missing printk() KERN_* levels ide: fix sparse warning about shadowing 'flags' symbol ide-cd: fix CD/DVD burning ide-cd: fix 'ireason' handling for REQ_TYPE_ATA_PC requests qd65xx: fix setup of QD6580 Control register ide: skip probing port if "hdx=noprobe" was used for both devices on it ide: remove redundant comment from ide_unregister() hpt366: fix section mismatch warnings ide-cd: Enable audio play quirk for Optiarc DVD RW AD-5200A drive
2008-02-29Fix hpet_(un)register_irq_handler() for emulationDavid Howells1-2/+2
Fix hpet_(un)register_irq_handler() for when CONFIG_HPET_EMULATE_RTC=n. They are provided macros that substitute value 0, but if they are called as functions and the return value isn't checked, the following warnings appear: drivers/char/rtc.c: In function `rtc_init': drivers/char/rtc.c:1063: warning: statement with no effect drivers/char/rtc.c: In function `rtc_exit': drivers/char/rtc.c:1157: warning: statement with no effect Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-29Blackfin Serial Driver: Fix bug - Only insert UART rx char in timer task.Sonic Zhang1-16/+7
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3910 Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-02-28sata_svw: Add support for HT1100 SATA controllerAnantha Subramanyam1-14/+63
This patch adds support (including ATAPI DMA) for HT1100 (aka BCM11000) SATA controller. Signed-off-by: Anantha Subramanyam <ananth@broadcom.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-28[BNX2X]: update version, remove CVS stringsEliezer Tamir1-3/+2
Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-28[BNX2X]: Fix Xmit bugsEliezer Tamir2-5/+10
Several endianity corrections in start_xmit() Fixed TSO bug where packets were missing the TCP flags. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-28[BNX2X]: Prevent PCI queue overflowEliezer Tamir1-4/+8
Limit traffic through an internal queue to prevent overflow. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-28[BNX2X]: fix slowpath races and lockingEliezer Tamir2-100/+116
Fixed locking between fastpath and slowpath operations. Corrected order of traffic disabling to prevent race when going down under traffic. - first have the microcode drop all incoming packets - then do the slowpath stuff - only then reset the MAC Got rid of in_reset_task. Remove_one() and friends would deference a null pointer if init_one failed. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-28[BNX2X]: fix HW attentions and error handlingEliezer Tamir1-79/+150
Some of the HW attentions, used to indicate an error were not properly acked. This will cause the driver to endlessly receive interrupts when such an error happens. Had to break the code into smaller chunks because it got too nested. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-28[BNX2X]: fix MSI-X/INT#A errataEliezer Tamir1-8/+16
Errata A0.158 workaround. Running in INT#A mode after running with MSI-X fails due to a PCI core bug. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-28[BNX2X]: correct statisticsEliezer Tamir2-85/+83
Errors were summed improperly, some stats were missing. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-28[BNX2X]: Correct RX filtering and MC configurationEliezer Tamir2-78/+92
The configuration of RX filtering needed the following corrections: Drop flags need to be set per Rx queue. Have to tell the microcode to collect drop stats, and properly wait for them to complete when going down. Sometimes we failed to detect proper completion due to a logical error in the wait loop. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-28[BNX2X]: Correct Link managementEliezer Tamir5-649/+1734
Properly protect PHY access between two devices on the same board with a HW lock. Use GPIO to clear all previous configurations before changing link parameters. Shut down the external PHY in case of fan failure. Reducing the MDC/MDIO clock to 2.5MHz due to problems with some devices. Resolve the flow control response according to autoneg with external PHY. Unmasking all PHY interrupts in single write to prevent a race in the interrupts order. LASI indication fixes to work with peculiarities of PHYs. Disable MAC RX to avoid a HW bug when closing the MAC under traffic. Disable parallel detection on HiGig due to HW limitation. Updating the shared memory structure to work with the current bootcode. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-28[BNX2X]: Correct init_one()Eliezer Tamir2-15/+31
Correct PCI-E info printed by init_one() In one case it failed to free the netdev. Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-28[BNX2X]: Spelling fixesEliezer Tamir2-65/+56
Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-28SSB PCI core driver: use new SPROM data structureAurelien Jarno1-1/+1
Switch the SSB PCI core driver to the new SPROM data structure now that the old one has been removed. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-28Don't build bcm43xx if SSB is static and b43 PCI-SSB bridge is enabled.Alexey Zaytsev1-1/+1
This may happen e.g. when the ssb is statically enables by the b44 driver, and the b43 pci-ssb bridge is enbled by the b43/b43legacy drivers, or the b43/b43legacy drivers are built statically. Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-28Use a separate config option for the b43 pci to ssb bridge.Alexey Zaytsev5-3/+10
The bridge code was unnecessary enabled by the b44 driver, but it prevents the bcm43xx driver from being loaded, as the bridge claims the same pci ids. Now we enable the birdge only if the b43{legacy} drivers are selected. Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-28libertas: Remove unused exportsRoland Dreier3-20/+0
The libertas driver exports a number of symbols with no in-tree users; remove these unused exports. lbs_reset_device() is completely unused, with no callers at all, so remove the function completely. A couple of these unused exported symbols are static, which causes the following build error on ia64 with gcc 4.2.3: drivers/net/wireless/libertas/main.c:1375: error: __ksymtab_lbs_remove_mesh causes a section type conflict drivers/net/wireless/libertas/main.c:1354: error: __ksymtab_lbs_add_mesh causes a section type conflict Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-28rt2x00: Fix rt2x00lib_reset_link_tuner()Ivo van Doorn1-19/+30
rt2x00lib_reset_link_tuner() can be called from within the link tuner itself. This means that it should _not_ call rt2x00lib_stop_link_tuner() since that will cause the thread to hang. Reorder the things that should be done during a link tuner reset and during a link tuner start. Also make antenna tuning the last step of the link tuner since it could possibly reset some statistical information which we need for average calculation. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-28rt2x00: Don't switch to antenna with low rssiIvo van Doorn2-13/+9
When rssi_a > rssi_b is true and the current antenna was already antenna A, then rt2x00 incorrectly jumped to antenna B. Also don't configure the antenna when there has been no change in the antenna setup. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-28rt2x00: Add link tuner safe RX toggle statesIvo van Doorn7-7/+29
This adds 2 new states which both are used to toggle the RX. These new states are required for usage inside the link tuner thread, because the normal RX toggling will stop the link tuner thread. While it is possible that the link tuner thread itself is the caller of the RX toggle (when using software antenna diversity). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-28rt2x00: Fix antenna diversityIvo van Doorn1-3/+3
Fix 2 issues in antenna diversity selection. 1) the following statement will always return true. if ((rssi_curr - rssi_old) > -5 || (rssi_curr - rssi_old) < 5) It is cleaner to check if the absolute value is smaller then 5. 2) Only enable software diversity when default antenna setup indicates support for it. Don't select it when the hardware does not indicate support for it... Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-28gelic wireless driver needs WIRELESS_EXT supportSebastian Siewior1-0/+1
| CC drivers/net/ps3_gelic_wireless.o | /home/bigeasy/git/linux-2.6/drivers/net/ps3_gelic_wireless.c: In function 'gelic_wl_setup_netdev_ops': | /home/bigeasy/git/linux-2.6/drivers/net/ps3_gelic_wireless.c:2660: error: 'struct net_device' has no member named 'wireless_data' | /home/bigeasy/git/linux-2.6/drivers/net/ps3_gelic_wireless.c:2661: error: 'struct net_device' has no member named 'wireless_handlers' | make[3]: *** [drivers/net/ps3_gelic_wireless.o] Error 1 | make[2]: *** [drivers/net] Error 2 | make[1]: *** [drivers] Error 2 | make[1]: *** Waiting for unfinished jobs.... | make: *** [sub-make] Error 2 Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Acked-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-28PS3: gelic: Link the wireless net_device structure to the corresponding ↵Masakazu Mokuno1-0/+1
device structure Link the net_device structure of the wireless part to the corresponding device structure. Without this, the sysfs node for this net_device would not have 'device' link. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-28rndis_wlan: fix sparse warningsJohannes Berg1-7/+7
It is obviously wrong to use an enum in a little endian struct, and those other enums should be declared differently. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-02-26CONNECTOR: make cn_already_initialized staticLi Zefan1-1/+1
It is used in connector.c only, so make it static. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-26[MACVLAN]: Update Kconfig to refer to iproutePatrick McHardy1-0/+5
Since the macvlan release I had at least 5 users asking how to configure it since the old userspace tool doesn't work with the version in the kernel. Add a pointer to the Kconfig help. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-26RDMA/nes: Fix interrupt moderation low thresholdJohn Lacombe2-9/+6
Interrupt moderation low threshold value was incorrectly triggering, indicating that the threshold should be lowered. The impact was the timer was likely to become 40usecs and get stuck there. The biggest side effect was too many interrupts and nonoptimal performance. Signed-off-by: John Lacombe <jlacombe@neteffect.com> Signed-off-by: Glenn Streiff <gstreiff@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-26RDMA/nes: Fix CRC endianness for RDMA connection establishment on big-endianFaisal Latif2-4/+21
With commit ef19454b ("[LIB] crc32c: Keep intermediate crc state in cpu order"), the behavior of crc32c changes on big-endian platforms. Our algorithm expects the previous behavior; otherwise we have RDMA connection establishment failure on big-endian platforms like powerpc. Apply cpu_to_le32() to value returned by crc32c() to get the previous behavior. Signed-off-by: Faisal Latif <flatif@neteffect.com> Signed-off-by: Glenn Streiff <gstreiff@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-26RDMA/nes: Fix use-after-free in mini_cm_dec_refcnt_listen()Faisal Latif1-0/+1
Fix use-after-free spotted by Coverity checker flagged by Adrian Bunk. Signed-off-by: Faisal Latif <flatif@neteffect.com> Signed-off-by: Glenn Streiff <gstreiff@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-26RDMA/nes: Fix use-after-free in nes_create_cq()Glenn Streiff1-3/+0
Just delete the debugging statement so we don't use cqp_request after freeing it. Adrian Bunk flagged this use-after-free issue spotted by the Coverity checker. Signed-off-by: Glenn Streiff <gstreiff@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-26RDMA/nes: Fix a check-after-use in nes_probe()Adrian Bunk1-1/+1
Fix a check-after-use spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Glenn Streiff <gstreiff@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-26RDMA/nes: Fix a memory leak in schedule_nes_timer()Adrian Bunk1-2/+2
Fix a memory leak spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Glenn Streiff <gstreiff@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-26ide: remove stale comments from ide-dma.c (take 2)Bartlomiej Zolnierkiewicz1-48/+4
- ide-dma.c is not a separate module - ide-dma.c is not PCI specific anymore - DMA is enabled by default nowadays - link for Intel Zappa BIOS is dead etc. v2: * Some comments should be preserved. (Noticed by Mark Lord) Cc: Mark Lord <liml@rtr.ca> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-26qd65xx: remove commented out codeBartlomiej Zolnierkiewicz1-37/+0
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-26ide-tape: schedule driver for removal after 6 monthsBorislav Petkov1-0/+5
Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-26ide-disk: add missing printk() KERN_* levelsBartlomiej Zolnierkiewicz1-2/+3
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-26ide: fix sparse warning about shadowing 'flags' symbolBartlomiej Zolnierkiewicz1-8/+5
drivers/ide/ide.c:801:18: warning: symbol 'flags' shadows an earlier one drivers/ide/ide.c:732:16: originally declared here Also fix some whitespace damage while at it. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-26ide-cd: fix CD/DVD burningAndreas Schwab1-3/+2
Move counting of sense bytes into the transfer loop. Signed-off-by: Andreas Schwab <schwab@suse.de> Acked-by: Borislav Petkov <petkovbb@gmail.com> Cc: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-26ide-cd: fix 'ireason' handling for REQ_TYPE_ATA_PC requestsBartlomiej Zolnierkiewicz1-14/+10
Pass 'struct request *rq' to ide_cd_check_ireason() from cdrom_newpc_intr() and use ide_cd_check_ireason() also for REQ_TYPE_ATA_PC requests. This fixes some hangs caused by not finishing the transfer before ending the request and also makes use of 'ireason == 1' quirk for spurious IRQs. Tested-by: Brad Rosser <brad.rosser@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 01:59:24 +0000