summaryrefslogtreecommitdiff
path: root/drivers/usb/renesas_usbhs
AgeCommit message (Collapse)AuthorFilesLines
2013-04-09USB: regroup all depends on USB within an if USB blockFlorian Fainelli1-1/+1
This patch removes the depends on USB from all config symbols in drivers/usb/host/Kconfig and replace that with an if USB / endif block as suggested by Alan Stern. Some source ... Kconfig lines have been shuffled around to permit a better regroupment of the Kconfig files depending on "config USB" item. No functionnal change is introduced. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-02usb: renesas_usbhs: fixup sparse errors for common.cKuninori Morimoto1-3/+3
This patch fixup below sparse errors CHECK ${RENESAS_USB}/common.c ${RENESAS_USB}/common.c:313:17: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/common.c:322:17: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/common.c:384:17: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/common.c:524:9: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/common.c:545:9: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/common.c:574:9: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/common.c:606:9: error: incompatible types in conditional expression (different base types) ${RENESAS_USB}/mod_gadget.c:233:28: warning: symbol 'req_clear_feature' was not declared. Should it be static? ${RENESAS_USB}/mod_gadget.c:274:28: warning: symbol 'req_set_feature' was not declared. Should it be static? ${RENESAS_USB}/mod_gadget.c:375:28: warning: symbol 'req_get_status' was not declared. Should it be static? [ balbi@ti.com : added three sparse fixes to mod_gadget.c ] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: renesas: remove unused DMA_ADDR_INVALIDFelipe Balbi2-3/+0
DMA_ADDR_INVALID isn't used anymore, it's safe to remove it. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: renesas: gadget: don't assign gadget.dev.release directlyFelipe Balbi1-6/+0
udc-core provides a better way to handle release methods, let's use it. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: renesas: gadget: don't touch gadget.dev.driverFelipe Balbi1-2/+0
udc-core now handles that for us, which means we can remove it from our driver. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: gadget: drop now unnecessary flagFelipe Balbi1-1/+0
We don't need the ->register_my_device flag anymore because all UDC drivers have been properly converted. Let's remove every history of it. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18usb: renesas_usbhs: gadget: let udc-core manage gadget->devFelipe Balbi1-9/+2
By simply setting a flag, we can drop some boilerplate code. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-02-21Merge tag 'usb-3.9-rc1' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg Kroah-Hartman: "Here's the big USB merge for 3.9-rc1 Nothing major, lots of gadget fixes, and of course, xhci stuff. All of this has been in linux-next for a while, with the exception of the last 3 patches, which were reverts of patches in the tree that caused problems, they went in yesterday." * tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (190 commits) Revert "USB: EHCI: make ehci-vt8500 a separate driver" Revert "USB: EHCI: make ehci-orion a separate driver" Revert "USB: update host controller Kconfig entries" USB: update host controller Kconfig entries USB: EHCI: make ehci-orion a separate driver USB: EHCI: make ehci-vt8500 a separate driver USB: usb-storage: unusual_devs update for Super TOP SATA bridge USB: ehci-omap: Fix autoloading of module USB: ehci-omap: Don't free gpios that we didn't request USB: option: add Huawei "ACM" devices using protocol = vendor USB: serial: fix null-pointer dereferences on disconnect USB: option: add Yota / Megafon M100-1 4g modem drivers/usb: add missing GENERIC_HARDIRQS dependencies USB: storage: properly handle the endian issues of idProduct testusb: remove all mentions of 'usbfs' usb: gadget: imx_udc: make it depend on BROKEN usb: omap_control_usb: fix compile warning ARM: OMAP: USB: Add phy binding information ARM: OMAP2: MUSB: Specify omap4 has mailbox ARM: OMAP: devices: create device for usb part of control module ...
2013-02-08drivers/usb: add missing GENERIC_HARDIRQS dependenciesHeiko Carstens1-1/+1
Add a couple of missing GENERIC_HARDIRQS dependencies to fix link errors like below on s390: ERROR: "devm_request_threaded_irq" [drivers/usb/gadget/mv_udc.ko] undefined! Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-25Merge tag 'gadget-for-v3.9' of ↵Greg Kroah-Hartman1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: gadget: patches for v3.9 merge window finally getting rid of the old ->start()/->stop() methods in favor of the better and improved ->udc_start()/->udc_stop(). There were surprisingly quite a few users left, but all of them have been converted. f_mass_storage removed some dead code, which is always great ;-) There's also a big cleanup to the gadget framework from Sebastian which gets us a lot closer to having only function drivers in kernel and move over to configfs-based binding. Other than these, there's the usual set of cleanups: s3c UDCs are moving over to devm_regulator_bulk_get() API, at91_udc removed an unnecessary check for work_pending() before scheduling and there's the removal of an unused variable from uac2_pcm_trigger().
2013-01-24usb: gadget: constify all struct usb_gadget_opsFelipe Balbi1-1/+1
Add the missing 'const' keyword to all struct usb_gadget_ops in the gadget framework. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-22usb: Convert to devm_ioremap_resource()Thierry Reding1-5/+4
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-13usb: renesas_usbhs: mod_host: fixup usbhsh_ureq_free() timingKuninori Morimoto1-1/+2
usbhsh_ureq_free() free ureq which includes ubshs_pkt. But current driver used usbhs_pkt after freed ureq. This patch fixup this bug. Special thanks to Chen Reported-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-12-13usb: renesas_usbhs: gadget: usbhsg_ep_disable() care pipe settingsKuninori Morimoto1-3/+8
Current usbhsg_ep_disable() didn't care uep->pipe and pipe->mod_private variable which is used on usbhsg_ep_enable(). It breaks renesas_usbhs gadget when resume. This patch fixes it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-12-13usb: renesas_usbhs: gadget: remove usbhsg_uep_init()Kuninori Morimoto1-10/+1
Current driver always initialized uep->pipe to NULL on usbhsg_try_start(). But it breaks relationship with usb_ep_ops :: enable/disable functions when suspend/resume. This patch solved this issue by initializing uep->pipe on probe() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-11-21usb: remove use of __devexitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-21usb: remove use of __devexit_pBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Li Yang <leoli@freescale.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-11Merge tag 'gadget-for-v3.8' of ↵Greg Kroah-Hartman8-24/+157
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next USB gadget patches from Felipe: "usb: gadget: patches for v3.8 renesas_usbhs implements ->pullup() method, switches over to devm_request_irq(), adds support for DMA Engine and got a few miscelaneous cleanups. The NCM gadget got an endianness fix and the Ethernet gadget a frame size fix. We're finally removing the g_file_storage gadget and sticking to g_mass_storage and the new tcm_usb_gadget gadgets since that was a huge duplicaton of effort anyway. While removing g_file_storage, we also had to fix a bunch of defconfigs which were still pointing to the old gadget. There's a big series getting us closer to being able to introduce our configfs interface. The series converts functions into loadable modules which will, eventually, be registered to the configfs interface. Other than that there's the usual typo fixes and miscelaneous cleanups all over the place."
2012-11-08usb: renesas_usbhs: use transfer counter if IN direction bulk pipeKuninori Morimoto3-0/+106
received data will break if it was bulk pipe and large data size, because pipe kept BUF PID even though it doesn't have enough buffer. To avoid this issue, renesas_usbhs can use transfer counter. Pipe PID will be NAK if it didn't have enough buffer by this patch. renesas_usbhs has strange address mapping. Thus, it is difficult to calculate transfer counter setting address. This patch use fixed table for it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-11-06usb: renesas_usbhs: host: add endpoint user counterKuninori Morimoto1-11/+13
renesas_usbhs attaches pipe to endpoint when urb was queued, and it will be detached when transfer was done. Multi device controlling was enabled by this behavior. Now renesas_usbhs driver tried to wait until detaching if urb was queued to endpoint which already has been attached to pipe, and it created strange driver behavior. But it can re-use this attached pipe if multi urb was queued. This patch implements it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-11-06usb: renesas_usbhs: remove debug information from usbhsh_hub_status_data()Kuninori Morimoto1-4/+0
Because usbhsh_hub_status_data() will be called many times, there are too many obstructive/useless debug informations if driver has #define DEBUG. Thus, other important dev_dbg() information will hide. This patch removed obstructive/useless dev_dbg(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-11-06usb: fix typo in drivers/usbMasanari Iida1-1/+1
Correct spelling typo in debug messages within drivers/usb. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31usb: renesas_usbhs: add DMAEngine support on mod_hostKuninori Morimoto1-2/+15
This patch enabled dma mapping, and used dma transfer handler on mod_host Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31usb: renesas_usbhs: fixup unreadable macroKuninori Morimoto1-4/+4
mod.h has irq_bempsts/irq_brdysts to keep each irq status, but it was difficult to find where they were used on renesas_usbhs driver by using "grep irq_xxxx" command, since it used irq_##status macro. This patch fixup them Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31usb: renesas_usbhs: use devm_request_irq()Kuninori Morimoto1-2/+1
This patch uses devm_request_irq() instead of request_irq(), and removed free_irq() from driver Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-23usb: renesas_usbhs: fixup dma transfer stallKuninori Morimoto1-0/+1
renesas_usbhs driver can switch DMA/PIO transfer by using handler, and each handler have push/pop direction. But unfortunately, current dma push handler didn't a path which calls usbhs_pipe_enable(). Thus, dma transfer never happened. this patch fixes it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-23usb: renesas_usbhs: fixup: avoid NULL access on error case pipe detachKuninori Morimoto1-0/+5
If renesas_usbhs or DMAEngine interrupt didn't happen by a certain cause, urb->ep will be NULL by usb time out. Then, host mode will access to it and crash kernel. This patch fixes it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-16usb: renesas_usbhs: gadget: add usb_gadget_ops :: pullup supportkuninori.morimoto.gx@renesas.com3-0/+17
This patch adds usbhs_sys_function_pullup() to control D+ line for USB function, and enabled pullup support on mod_gadget. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-16usb: renesas_usbhs: fixup interrupt status clear methodKuninori Morimoto1-3/+3
When interrupt happened, renesas_usbhs driver gets irq status by usbhs_status_get_each_irq(), and cleared all status by using 0. But, this method is incorrect, since extra interrupt might occur between them. This patch cleared corresponding bits only Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-16usb: renesas_usbhs: fixup __usbhs_for_each_pipe 1st posKuninori Morimoto1-1/+1
__usbhs_for_each_pipe() is the macro which moves around each pipe, but it has a bug which didn't care about 1st pipe's position. Because of this bug, it moves around pipe0, pipe2, pipe3 ... even though it requested pipe1, pipe2, pipe3... This patch modifies it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-11usb: renesas_usbhs: convert to devm_xxx()Kuninori Morimoto1-11/+4
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05usb: renesas_usbhs: fixup DMA transport data alignmentKuninori Morimoto1-2/+2
renesas_usbhs dma can transport 8byte alignment data, not 4byte. This patch fixup it. Reported-by: Sugnan Prabhu S <sugnan.prabhu@renesasmobile.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-05usb: renesas_usbhs: modify the irq handler for sharing irqShimoda, Yoshihiro1-3/+22
When IORESOURCE_IRQ_SHAREABLE is set, the irq handler may be called even if the interupt of the USB module doesn't happen. So, it may clear the interrupt flags by mistake. This patch fixes it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10usb: renesas_usbhs: fixup resume method for autonomy modeKuninori Morimoto1-3/+3
If renesas_usbhs is probed as autonomy mode, phy reset should be called after power resumed, and manual cold-plug should be called with slight delay. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-10usb: renesas_usbhs: mod_host: add missing .bus_suspend/resumeKuninori Morimoto1-0/+8
suspend/resume will failed on renesas_usbhs without this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-26Merge tag 'usb-3.6-rc1' of ↵Linus Torvalds1-11/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg Kroah-Hartman: "Here's the big USB patch set for the 3.6-rc1 merge window. Lots of little changes in here, primarily for gadget controllers and drivers. There's some scsi changes that I think also went in through the scsi tree, but they merge just fine. All of these patches have been in the linux-next tree for a while now. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up trivial conflicts in include/scsi/scsi_device.h (same libata conflict that Jeff had already encountered) * tag 'usb-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (207 commits) usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams usb: Add quirk detection based on interface information usb: s3c-hsotg: Add header file protection macros in s3c-hsotg.h USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer USB: add USB_VENDOR_AND_INTERFACE_INFO() macro USB: notify phy when root hub port connect change USB: remove 8 bytes of padding from usb_host_interface on 64 bit builds USB: option: add ZTE MF821D USB: sierra: QMI mode MC7710 moved to qcserial USB: qcserial: adding Sierra Wireless devices USB: qcserial: support generic Qualcomm serial ports USB: qcserial: make probe more flexible USB: qcserial: centralize probe exit path USB: qcserial: consolidate usb_set_interface calls USB: ehci-s5p: Add support for device tree USB: ohci-exynos: Add support for device tree USB: ehci-omap: fix compile failure(v1) usb: host: tegra: pass correct pointer in ehci_setup() USB: ehci-fsl: Update ifdef check to work on 64-bit ppc USB: serial: keyspan: Removed unrequired parentheses. ...
2012-07-24Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-5/+5
Pull slave-dmaengine update from Vinod Koul: "This time we have a new dmaengine driver from the tegra folks. Also we have Guennadi's cleanup of sh drivers which incudes a library for sh drivers. And the usual odd fixes in bunch of drivers and some nice cleanup of dw_dmac from Andy." Fix up conflicts in drivers/mmc/host/sh_mmcif.c * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits) dmaengine: Cleanup logging messages mmc: sh_mmcif: switch to the new DMA channel allocation and configuration dma: sh: provide a migration path for slave drivers to stop using .private dma: sh: use an integer slave ID to improve API compatibility dmaengine: shdma: prepare to stop using struct dma_chan::private sh: remove unused DMA device pointer from SIU platform data ASoC: siu: don't use DMA device for channel filtering dmaengine: shdma: (cosmetic) simplify a static function dmaengine: at_hdmac: add a few const qualifiers dw_dmac: use 'u32' for LLI structure members, not dma_addr_t dw_dmac: mark dwc_dump_lli inline dma: mxs-dma: Export missing symbols from mxs-dma.c dma: shdma: convert to the shdma base library ASoC: fsi: prepare for conversion to the shdma base library usb: renesas_usbhs: prepare for conversion to the shdma base library ASoC: siu: prepare for conversion to the shdma base library serial: sh-sci: prepare for conversion to the shdma base library mmc: sh_mobile_sdhi: prepare for conversion to the shdma base library mmc: sh_mmcif: remove unneeded struct sh_mmcif_dma, prepare to shdma conversion dma: shdma: prepare for conversion to the shdma base library ...
2012-07-13usb: renesas_usbhs: prepare for conversion to the shdma base libraryGuennadi Liakhovetski1-5/+5
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-09usb: renesas_usbhs: use dmaengine helper functionsKuninori Morimoto1-11/+3
This patch used dmaengine helper functions instead of using hand setting. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-05renesas_usbhs: cleanup quoted includesPaul Bolle7-12/+12
A few quoted includes start with a superfluous "./". Clean up those quoted includes. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-04usb: renesas_usbhs: gadget: add support for set_selfpoweredShimoda, Yoshihiro1-1/+18
The previous code always set to USB_DEVICE_SELF_POWERED in GET_STATUS. So, this patch adds set_selfpowered(). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-03-29Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-3/+2
Pull slave-dmaengine update from Vinod Koul: "This includes the cookie cleanup by Russell, the addition of context parameter for dmaengine APIs, more arm dmaengine driver cleanup by moving code to dmaengine, this time for imx by Javier and pl330 by Boojin along with the usual driver fixes." Fix up some fairly trivial conflicts with various other cleanups. * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (67 commits) dmaengine: imx: fix the build failure on x86_64 dmaengine: i.MX: Fix merge of cookie branch. dmaengine: i.MX: Add support for interleaved transfers. dmaengine: imx-dma: use 'dev_dbg' and 'dev_warn' for messages. dmaengine: imx-dma: remove 'imx_dmav1_baseaddr' and 'dma_clk'. dmaengine: imx-dma: remove unused arg of imxdma_sg_next. dmaengine: imx-dma: remove internal structure. dmaengine: imx-dma: remove 'resbytes' field of 'internal' structure. dmaengine: imx-dma: remove 'in_use' field of 'internal' structure. dmaengine: imx-dma: remove sg member from internal structure. dmaengine: imx-dma: remove 'imxdma_setup_sg_hw' function. dmaengine: imx-dma: remove 'imxdma_config_channel_hw' function. dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function. dmaengine: imx-dma: remove dma_mode member of internal structure. dmaengine: imx-dma: remove data member from internal structure. dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c dmaengine: at_hdmac: add slave config operation dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclic dmaengine/dma_slave: introduce inline wrappers dma: imx-sdma: Treat firmware messages as warnings instead of erros ...
2012-03-21dmaengine/dma_slave: introduce inline wrappersAlexandre Bounine1-3/+2
Add inline wrappers for device_prep_slave_sg() and device_prep_dma_cyclic() interfaces to hide new parameter from current users of affected interfaces. Convert current users to use new wrappers instead of direct calls. Suggested by Russell King [https://lkml.org/lkml/2012/2/3/269]. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-01Merge tag 'gadget-for-v3.4' of ↵Greg Kroah-Hartman6-79/+46
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next USB: Gadget: changes for 3.4 This merge is rather big. Here's what it contains: For am5536udc we have just simple coding style fixes. Nothing that has any potential to cause any issues going forward. With mv_udc, there's only one single change removing an unneeded NULL check. at91_udc also only saw a single change this merge window, and that's only removing a duplicated header. The Renesas controller has a few more involved changes. Support for SUDMAC was added, there's now a special handling of IRQ resources for when the IRQ line is shared between Renesas controller and SUDMAC, we also had a bug fix where Renesas controller would sleep in atomic context while doing DMA transfers from a tasklet. There were also a set of minor cleanups. The FSL UDC also had a scheduling in atomic context bug fix, but that's all. Thanks to Sebastian, the dummy_hcd now works better than ever with support for scatterlists and streams. Sebastian also added SuperSpeed descriptors to the serial gadgets. The highlight on this merge is the addition of a generic API for mapping and unmapping usb_requests. This will avoid code duplication on all UDC controllers and also kills all the defines for DMA_ADDR_INVALID which UDC controllers sprinkled around. A few of the UDC controllers were already converted to use this new API. Conflicts: drivers/usb/dwc3/gadget.c
2012-02-28usb: renesas: gadget: use generic map/unmap routinesFelipe Balbi1-56/+17
those routines have everything we need to map/unmap USB requests and it's better to use them. Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-24usb: renesas_usbhs: bugfix: add .release function to gpriv->gadget.devKuninori Morimoto1-0/+6
This patch fixup below warning on device_unregister() renesas_usbhs renesas_usbhs.1: host probed renesas_usbhs renesas_usbhs.1: gadget probed renesas_usbhs renesas_usbhs.1: irq request err ------------[ cut here ]------------ WARNING: at ${LINUX}/drivers/base/core.c:1) Device 'gadget' does not have a release() function, it is broken and must be fi. Modules linked in: [<c000e25c>] (unwind_backtrace+0x0/0xe4) from [<c0016960>] (warn_slowpath_commo) [<c0016960>] (warn_slowpath_common+0x4c/0x64) from [<c00169f8>] (warn_slowpath_) [<c00169f8>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0185b80>] (device_release+0x) [<c0185b80>] (device_release+0x70/0x84) from [<c013e300>] (kobject_cleanup+0x58) [<c013e300>] (kobject_cleanup+0x58/0x6c) from [<c01cba14>] (usbhs_mod_gadget_re) [<c01cba14>] (usbhs_mod_gadget_remove+0x3c/0x6c) from [<c01c8384>] (usbhs_mod_p) [<c01c8384>] (usbhs_mod_probe+0x68/0x80) from [<c01c7f84>] (usbhs_probe+0x1cc/0) ... Cc: stable@vger.kernel.org Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-14usb: renesas: fix scheduling in atomic context bugGuennadi Liakhovetski2-13/+8
The current renesas_usbhs driver triggers BUG: scheduling while atomic: ksoftirqd/0/3/0x00000102 with enabled CONFIG_DEBUG_ATOMIC_SLEEP, by submitting DMA transfers from an atomic (tasklet) context, which is not supported by the shdma dmaengine driver. Fix it by switching to a work. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-14usb: renesas_usbhs: (cosmetic) simplify list operationsGuennadi Liakhovetski1-3/+2
list.h already provide helpers to find the first entry and to move list nodes to the tail of another list. This patch simply uses those helpers, no functional changes. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: renesas: silence uninitialized variable report in usbhsg_recip_run_handle()Jesper Juhl1-1/+1
In drivers/usb/renesas_usbhs/mod_gadget.c::usbhsg_recip_run_handle() the Coverity Prevent checker currently flags a warning about possibly uninitialized use of 'ret' i usbhsg_recip_run_handle(). It does this since it assumes we take one of the non-default branches in the switch and then subsequently take the false branch in the 'if (func)' case below. This exact scenario will never happen, but Coverity can't see that for some reason. This patch initializes 'ret' to '0' when it is declared which should shut up this report and won't really hurt - so why not? At least then it's clear that 'ret' is always initialized.. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-01-24usb: renesas_usbhs: add support for SUDMACShimoda, Yoshihiro1-1/+5
The SUDMAC uses 8-bit width only. So, when the driver uses SUDMAC, we have to clear the MBW_32. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-30 17:41:08 +0000