summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2013-04-30audit: do not needlessly take a spinlock in copy_signalEric Paris1-4/+0
current->signal->audit_* can only change from a netlink message from current. Obviously in this case we cannot be handling a netlink message from current. So there is no change these can change under us. No need to take a lock to read them. Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-30audit: add an option to control logging of passwords with pam_tty_auditRichard Guy Briggs1-0/+9
Most commands are entered one line at a time and processed as complete lines in non-canonical mode. Commands that interactively require a password, enter canonical mode to do this while shutting off echo. This pair of features (icanon and !echo) can be used to avoid logging passwords by audit while still logging the rest of the command. Adding a member (log_passwd) to the struct audit_tty_status passed in by pam_tty_audit allows control of canonical mode without echo per task. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-30audit: use spin_lock_irqsave/restore in audit tty codeEric Paris1-13/+19
Some of the callers of the audit tty function use spin_lock_irqsave/restore. We were using the forced always enable version, which seems really bad. Since I don't know every one of these code paths well enough, it makes sense to just switch everything to the safe version. Maybe it's a little overzealous, but it's a lot better than an unlucky deadlock when we return to a caller with irq enabled and they expect it to be disabled. Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-30audit: push loginuid and sessionid processing downEric Paris1-48/+24
Since we are always current, we can push a lot of this stuff to the bottom and get rid of useless interfaces and arguments. Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-30audit: stop pushing loginid, uid, sessionid as argumentsEric Paris1-1/+3
We always use current. Stop pulling this when the skb comes in and pushing it around as arguments. Just get it at the end when you need it. Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-29Merge tag 'tty-3.10-rc1' of ↵Linus Torvalds54-999/+1226
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver update from Greg Kroah-Hartman: "Here's the big tty/serial driver merge request for 3.10-rc1 Once again, Jiri has a number of TTY driver fixes and cleanups, and Peter Hurley came through with a bunch of ldisc fixes that resolve a number of reported issues. There are some other serial driver cleanups as well. All of these have been in the linux-next tree for a while" * tag 'tty-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (117 commits) tty/serial/sirf: fix MODULE_DEVICE_TABLE serial: mxs: drop superfluous {get|put}_device serial: mxs: fix buffer overflow ARM: PL011: add support for extended FIFO-size of PL011-r1p5 serial_core.c: add put_device() after device_find_child() tty: Fix unsafe bit ops in tty_throttle_safe/unthrottle_safe serial: sccnxp: Replace pdata.init/exit with regulator API serial: sccnxp: Do not override device name TTY: pty, fix compilation warning TTY: rocket, fix compilation warning TTY: ircomm: fix DTR being raised on hang up TTY: synclinkmp: fix DTR being raised on hang up TTY: synclink_gt: fix DTR being raised on hang up TTY: synclink: fix DTR being raised on hang up serial: 8250_dw: Fix the stub for dw8250_probe_acpi() serial: 8250_dw: Convert to devm_ioremap() serial: 8250_dw: Set port capabilities based on CPR register serial: 8250_dw: Let ACPI code extract the DMA client info serial: 8250_dw: Support clk framework also with ACPI serial: 8250_dw: Enable runtime PM ...
2013-04-29Merge tag 'char-misc-3.10-rc1' of ↵Linus Torvalds1-13/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver update from Greg Kroah-Hartman: "Here's the big char / misc driver update for 3.10-rc1 A number of various driver updates, the majority being new functionality in the MEI driver subsystem (it's now a subsystem, it started out just a single driver), extcon updates, memory updates, hyper-v updates, and a bunch of other small stuff that doesn't fit in any other tree. All of these have been in linux-next for a while" * tag 'char-misc-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (148 commits) Tools: hv: Fix a checkpatch warning tools: hv: skip iso9660 mounts in hv_vss_daemon tools: hv: use FIFREEZE/FITHAW in hv_vss_daemon tools: hv: use getmntent in hv_vss_daemon Tools: hv: Fix a checkpatch warning tools: hv: fix checks for origin of netlink message in hv_vss_daemon Tools: hv: fix warnings in hv_vss_daemon misc: mark spear13xx-pcie-gadget as broken mei: fix krealloc() misuse in in mei_cl_irq_read_msg() mei: reduce flow control only for completed messages mei: reseting -> resetting mei: fix reading large reposnes mei: revamp mei_irq_read_client_message function mei: revamp mei_amthif_irq_read_message mei: revamp hbm state machine Revert "drivers/scsi: use module_pcmcia_driver() in pcmcia drivers" Revert "scsi: pcmcia: nsp_cs: remove module init/exit function prototypes" scsi: pcmcia: nsp_cs: remove module init/exit function prototypes mei: wd: fix line over 80 characters misc: tsl2550: Use dev_pm_ops ...
2013-04-29m68k: remove unused asm/dbg.hGreg Ungerer1-1/+0
The contents of the m68k asm/dbg.h are never used, remove the file and remove the one reference to it. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-26TTY: fix atime/mtime regressionJiri Slaby1-2/+16
In commit b0de59b5733d ("TTY: do not update atime/mtime on read/write") we removed timestamps from tty inodes to fix a security issue and waited if something breaks. Well, 'w', the utility to find out logged users and their inactivity time broke. It shows that users are inactive since the time they logged in. To revert to the old behaviour while still preventing attackers to guess the password length, we update the timestamps in one-minute intervals by this patch. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-23tty/serial/sirf: fix MODULE_DEVICE_TABLEArnd Bergmann1-1/+1
This fixes building the sirfsorc-uart driver as a loadable module, which uses an incorrect MODULE_DEVICE_TABLE, by changing the reference to the correct symbol. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-22serial: mxs: drop superfluous {get|put}_deviceWolfram Sang1-3/+1
Driver core already takes care of refcounting, no need to do this on driver level again. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-22serial: mxs: fix buffer overflowWolfram Sang1-1/+1
SMATCH correctly found an off-by-one error: drivers/tty/serial/mxs-auart.c:889 auart_console_write() error: buffer overflow 'auart_port' 5 <= 5 Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-20serial: amba-pl011: fix !CONFIG_DMA_ENGINE caseArnd Bergmann1-1/+1
I changed the prototype of the function earlier but only in the section for CONFIG_DMA_ENGINE, not the alternative. This makes the driver build again, e.g. for vexpress_defconfig. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-19Merge branch 'spear/dwdma' into late/cleanupArnd Bergmann1-25/+37
This is a series originally prepared for inclusion in 3.9, which did not work out because of dependencies on the dmaengine driver. All the changes for the dmaengine code are merged in 3.9 now, so we can finally do the switchover and remove the now unnecessary dma definitions for spear13xx from the platform code. The dma platform_data actually made up the majority of the spear13xx platform code overall, so moving that into device tree files makes the code substantially smaller. * spear/dwdma: ata: arasan: remove the need for platform_data ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT serial: pl011: use generic DMA slave configuration if possible spi: pl022: use generic DMA slave configuration if possible Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-17ARM: PL011: add support for extended FIFO-size of PL011-r1p5Jongsung Kim1-4/+16
The latest r1p5-revision of the ARM PL011 UART has 32-byte FIFOs, while all earlier ones have 16-byte FIFOs. This patch suggests a way to set the FIFO-size correctly & flexibly by using a member function named get_fifosize, rather than using the fifosize member variable. The function takes the UARTPeriphID, and returns the correct FIFO size. Signed-off-by: Jongsung Kim <neidhard.kim@lge.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-15serial_core.c: add put_device() after device_find_child()Federico Vaga1-0/+4
The serial core uses device_find_child() but does not drop the reference to the retrieved child after using it. This patch add the missing put_device(). What I have done to test this issue. I used a machine with an AMBA PL011 serial driver. I tested the patch on next-20120408 because the last branch [next-20120415] does not boot on this board. For test purpose, I added some pr_info() messages to print the refcount after device_find_child() (lines: 1937,2009), and after put_device() (lines: 1947, 2021). Boot the machine *without* put_device(). Then: echo reboot > /sys/power/disk echo disk > /sys/power/state [ 87.058575] uart_suspend_port:1937 refcount 4 [ 87.058582] uart_suspend_port:1947 refcount 4 [ 87.098083] uart_resume_port:2009refcount 5 [ 87.098088] uart_resume_port:2021 refcount 5 echo disk > /sys/power/state [ 103.055574] uart_suspend_port:1937 refcount 6 [ 103.055580] uart_suspend_port:1947 refcount 6 [ 103.095322] uart_resume_port:2009 refcount 7 [ 103.095327] uart_resume_port:2021 refcount 7 echo disk > /sys/power/state [ 252.459580] uart_suspend_port:1937 refcount 8 [ 252.459586] uart_suspend_port:1947 refcount 8 [ 252.499611] uart_resume_port:2009 refcount 9 [ 252.499616] uart_resume_port:2021 refcount 9 The refcount continuously increased. Boot the machine *with* this patch. Then: echo reboot > /sys/power/disk echo disk > /sys/power/state [ 159.333559] uart_suspend_port:1937 refcount 4 [ 159.333566] uart_suspend_port:1947 refcount 3 [ 159.372751] uart_resume_port:2009 refcount 4 [ 159.372755] uart_resume_port:2021 refcount 3 echo disk > /sys/power/state [ 185.713614] uart_suspend_port:1937 refcount 4 [ 185.713621] uart_suspend_port:1947 refcount 3 [ 185.752935] uart_resume_port:2009 refcount 4 [ 185.752940] uart_resume_port:2021 refcount 3 echo disk > /sys/power/state [ 207.458584] uart_suspend_port:1937 refcount 4 [ 207.458591] uart_suspend_port:1947 refcount 3 [ 207.498598] uart_resume_port:2009 refcount 4 [ 207.498605] uart_resume_port:2021 refcount 3 The refcount correctly handled. Signed-off-by: Federico Vaga <federico.vaga@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-15tty: Fix unsafe bit ops in tty_throttle_safe/unthrottle_safePeter Hurley1-2/+2
tty->flags needs to be atomically modified. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-15serial: sccnxp: Replace pdata.init/exit with regulator APIAlexander Shiyan1-6/+15
Typical usage of pdata.init/exit is enable/disable power and/or toggle reset for the target chip. This patch replaces these callbacks with regulator API. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-15serial: sccnxp: Do not override device nameAlexander Shiyan1-2/+0
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-15TTY: pty, fix compilation warningJiri Slaby1-6/+6
When CONFIG_UNIX98_PTYS is unset, we see this warning in pty: drivers/tty/pty.c:409:13: warning: ‘pty_unix98_shutdown’ defined but not used Fix that by moving the function to a section which depends on that config. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-by: Toralf Foerster <toralf.foerster@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-15TTY: rocket, fix compilation warningJiri Slaby1-19/+21
When CONFIG_PCI is unset, we see these warnings in rocket: drivers/tty/rocket.c:3140:13: warning: 'rmSpeakerReset' defined but not used drivers/tty/rocket.c:2599:12: warning: 'sPCIInitController' defined but not used Fix those by moving the functions to one place and make them depend on CONFIG_PCI. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reported-by: Toralf Foerster <toralf.foerster@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-14Merge 3.9-rc7 intp tty-nextGreg Kroah-Hartman3-11/+20
We want the fixes here. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-14Merge 3.9-rc7 into char-misc-nextGreg Kroah-Hartman3-11/+20
We want the fixes in there. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-12TTY: synclinkmp: fix DTR being raised on hang upJohan Hovold1-1/+1
Make sure to check ASYNC_INITIALISED before raising DTR when waking up from blocked open in block_til_ready. Currently DTR could get raised at hang up as a blocked process would raise DTR unconditionally before checking for hang up and returning. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-12TTY: synclink_gt: fix DTR being raised on hang upJohan Hovold1-1/+1
Make sure to check ASYNC_INITIALISED before raising DTR when waking up from blocked open in block_til_ready. Currently DTR could get raised at hang up as a blocked process would raise DTR unconditionally before checking for hang up and returning. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-12TTY: synclink: fix DTR being raised on hang upJohan Hovold1-1/+1
Make sure to check ASYNC_INITIALISED before raising DTR when waking up from blocked open in block_til_ready. Currently DTR could get raised at hang up as a blocked process would raise DTR unconditionally before checking for hang up and returning. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-12serial: 8250_dw: Fix the stub for dw8250_probe_acpi()Heikki Krogerus1-1/+1
This fixes the stub for dw8250_probe_acpi() that is used when compiling without ACPI enabled. The argument type was wrong. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-11serial: 8250_dw: Convert to devm_ioremap()Heikki Krogerus1-1/+2
Use resource managed ioremap. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-11serial: 8250_dw: Set port capabilities based on CPR registerHeikki Krogerus1-0/+4
The Designware UART has an optional support for 16750 compatible Auto Flow Control. This will enable it based on the AFCE bit in Component Parameter Register. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-11serial: 8250_dw: Let ACPI code extract the DMA client infoHeikki Krogerus1-66/+9
The new ACPI DMA helpers in dmaengine API can take care of extracting all the necessary information regarding DMA. The driver does not need to do this separately any more. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-11serial: 8250_dw: Support clk framework also with ACPIHeikki Krogerus1-13/+5
The Lynxpoint LPSS peripheral clocks are now handled in clk framework so the drivers do not need to take care of them manually. In dw8250_probe_acpi(), the uartclk is now taken from the driver_data only if it was not already set. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-11serial: 8250_dw: Enable runtime PMHeikki Krogerus1-9/+52
This allows ACPI to put the device to D3 when it's not used. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-11serial: 8250_dma: Provide default slave configuration parametersHeikki Krogerus1-2/+8
Some slave channel parameters will be always the same. For example, direction for the Rx channel will always be DMA_DEV_TO_MEM and DMA_MEM_TO_DEV for Tx channel. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-11serial: 8250_dma: Use dmaengine helpers to get the slave channelsHeikki Krogerus1-2/+6
The helper functions in dmaengine API allow the drivers to request slave channels without the filter parameters. They will attempt to extract the needed DMA client information from DT or ACPI, but if such information is not available the filter parameters can still be used. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-11serial: 8250_dma: Fix RX handlingHeikki Krogerus1-7/+16
Overrun, parity and framing errors should be handled in 8250_core. This also adds check for the dma_status and exits if the channel is not idle. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-11serial: 8250_dma: TX cleanupHeikki Krogerus1-7/+4
Removing one unneeded uart_write_wakeup(). There is no need to start PIO transfer unless DMA fails, so this also changes serial8250_tx_dma() to return 0 unless that is the case. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-11tty: serial/samsung: fix modular buildArnd Bergmann2-3/+5
There are a few bugs in the samsung serial driver when built as a loadable module, which makes the console code unavailable, as well as giving no access to the 'printascii' early debug function. This adds the appropriate compile time conditionals. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-11tty: serial/samsung: make register definitions globalArnd Bergmann1-3/+3
The registers for the Samsung S3C serial port are currently defined in the platform specific arch/arm/plat-samsung/include/plat/regs-serial.h file, which is not visible to multiplatform capable drivers. Unfortunately, it is not possible to move the file into a more local place as we should normally try to, because the same registers may be used in one of four places: * In the driver itself * In platform-independent ARM code for early debug output * In platform_data definitions * In the Samsung platform power management code I have also found no way to logically split out a platform_data file, other than possibly move everything into include/linux/platform_data, which also felt wrong. The only part of this file that makes sense to keep specific to the s3c24xx platform are the virtual and physical addresses defined here, which are needed in no other location. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-11tty: serial/samsung: prepare for common clock APIArnd Bergmann1-1/+6
With the common clock interface, there is no way to provide the "clock_source" sysfs attribute for the samsung serial ports. Given that this file was purely informational and had fixed contents, we have reason to believe that no user space programs were relying on it. The sysfs file is not documented in the ABI docs. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-09tty: Fix race condition if flushing tty flip buffersPeter Hurley1-12/+10
As Ilya Zykov identified in his patch 'PROBLEM: Race condition in tty buffer's function flush_to_ldisc()', a race condition exists which allows a parallel flush_to_ldisc() to flush and free the tty flip buffers while those buffers are in-use. For example, CPU 0 | CPU 1 | CPU 2 | flush_to_ldisc() | | grab spin lock | tty_buffer_flush() | | flush_to_ldisc() wait for spin lock | | wait for spin lock | if (!test_and_set_bit(TTYP_FLUSHING)) | | while (next flip buffer) | | ... | | drop spin lock | grab spin lock | | if (test_bit(TTYP_FLUSHING)) | | set_bit(TTYP_FLUSHPENDING) | receive_buf() | drop spin lock | | | | grab spin lock | | if (!test_and_set_bit(TTYP_FLUSHING)) | | if (test_bit(TTYP_FLUSHPENDING)) | | __tty_buffer_flush() CPU 2 has just flushed and freed all tty flip buffers while CPU 1 is transferring data from the head flip buffer. The original patch was rejected under the assumption that parallel flush_to_ldisc() was not possible. Because of necessary changes to the workqueue api, work items can execute in parallel on SMP. This patch differs slightly from the original patch by testing for a pending flush _after_ each receive_buf(), since TTYP_FLUSHPENDING can only be set while the lock is dropped around receive_buf(). Reported-by: Ilya Zykov <linux@izyk.ru> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Ilya Zykov <linux@izyk.ru> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-09procfs: new helper - PDE_DATA(inode)Al Viro1-1/+1
The only part of proc_dir_entry the code outside of fs/proc really cares about is PDE(inode)->data. Provide a helper for that; static inline for now, eventually will be moved to fs/proc, along with the knowledge of struct proc_dir_entry layout. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-08tty: mxser: fix cycle termination condition in mxser_probe() and ↵Alexey Khoroshilov1-4/+4
mxser_module_init() There is a bug in resources deallocation code in mxser_probe() and mxser_module_init(). As soon as variable 'i' is unsigned int, cycle termination condition i >= 0 is always true. The patch fixes the issue. Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-08Revert "tty/8250_pnp: serial port detection regression since v3.7"Sean Young1-7/+5
This reverts commit 77e372a3d82e5e4878ce1962207edd766773cc76. Checking for disabled resources board breaks detection pnp on another board "AMI UEFI implementation (Version: 0406 Release Date: 06/06/2012)". I'm working with the reporter of the original bug to write and test a better fix. https://bugzilla.redhat.com/show_bug.cgi?id=928246 Signed-off-by: Sean Young <sean@mess.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05serial: max3100: use spi_get_drvdata() and spi_set_drvdata()Jingoo Han1-2/+2
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-04serial: mxs-auart: move to use generic DMA helperShawn Guo1-48/+4
With the generic DMA device tree helper supported by mxs-dma driver, client devices only need to call dma_request_slave_channel() for requesting a DMA channel from dmaengine. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2013-04-03OMAP/serial: Revert bad fix of Rx FIFO threshold granularityAlexey Pelykh1-0/+11
Partially reverts 1776fd059c40907297d6c26c51876575d63fd9e2 that introduced regression reported by Paul Walmsley. This commit restores setting granularity in SCR register and adds note about comments below being inconsistent with actual code. Signed-off-by: Alexey Pelykh <alexey.pelykh@gmail.com> Tested-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@linaro.org> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-03amba-pl011: fix build error if CONFIG_DMA_ENGINE is not enabledChanho Min1-0/+4
Following patch will fix build error if CONFIG_DMA_ENGINE is unset. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Chanho Min <chanho.min@lge.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-01Input: sysrq - supplement reset sequence with timeout functionalityMathieu J. Poirier1-13/+40
Some devices have too few buttons, which it makes it hard to have a reset combo that won't trigger automatically. As such a timeout functionality that requires the combination to be held for a given amount of time before triggering is introduced. If a key combo is recognized and held for a 'timeout' amount of time, the system triggers a reset. If the timeout value is omitted the driver simply ignores the functionality. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-01Merge 3.9-rc5 into tty-nextGreg Kroah-Hartman8-26/+58
We need the fixes here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-01Merge v3.9-rc5 into char-misc-nextGreg Kroah-Hartman7-14/+49
This picks up the fixes in 3.9-rc5 that we need here. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-15 18:34:24 +0000