summaryrefslogtreecommitdiff
path: root/drivers/s390
AgeCommit message (Collapse)AuthorFilesLines
2006-07-27[S390] duplicate ccw devices in ccwgroup.Cornelia Huck1-7/+3
Fail to create a ccwgroup device if a ccw device is passed in twice. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-27[S390] permanent subchannel busy conditions may cause I/O stallPeter Oberparleiter1-1/+2
In special conditions where a subchannel rejects the HALT I/O- instruction with a busy indication (cc 2), I/O may stall. I/O request termination logic retries HALT I/O indefinitely because it expects HALT I/O to alter the subchannel status which is not true when cc 2 is returned. In case of a busy indication, try CLEAR I/O instruction immediately. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-18[S390] sysfs_create_xxx return values.Heiko Carstens5-32/+76
Take return values of sysfs_create_group & friends into account. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-17[S390] channel measurement interval display.Cornelia Huck1-0/+1
Display avg_sample_interval in nanoseconds, like it is documented. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-17[S390] xpram module parameter parsing - take 2.Heiko Carstens1-3/+14
Don't use memparse since the default size modifier is 'k'. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-12[S390] Fix sparse warnings.Heiko Carstens27-124/+123
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-12[S390] path grouping and path verifications fixes.Cornelia Huck8-48/+225
1. Multipath devices for which SetPGID is not supported are not handled well. Use NOP ccws for path verification (sans path grouping) when SetPGID is not supported. 2. Check for PGIDs already set with SensePGID on _all_ paths (not just the first one) and try to find a common one. Moan if no common PGID can be found (and use NOP verification). If no PGIDs have been set, use the css global PGID (as before). (Rationale: SetPGID will get a command reject if the PGID it tries to set does not match the already set PGID.) 3. Immediately before reboot, issue RESET CHANNEL PATH (rcp) on all chpids. This will remove the old PGIDs. rcp will generate solicited CRWs which can be savely ignored by the machine check handler (all other actions create unsolicited CRWs). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-12[S390] xpram module parameter parsing.Heiko Carstens1-57/+6
The module parameters for xpram are not or in a wrong way parsed. The xpram module uses the module_param_array directive with an int parameter which causes the kernel to automatically parse the passed numbers. This will cause errors if arguments are omitted or cause wrong results if arguments have size qualifiers. Use module_param_array with charp and parse the arguments later. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-12[S390] subchannel register/unregister mutex.Cornelia Huck5-7/+29
Add a reg_mutex to prevent unregistering a subchannel before it has been registered. Since 2.6.17, we've seen oopses in kslowcrw when a device is found to be not operational during sense id when doing initial device recognition; it is not clear yet why that particular problem was not (yet) observed with earlier kernels... Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-10[PATCH] s390: broken null test in claw driverDave Jones1-1/+1
Whoops, better hope this never gets passed a null dev in its current state. Signed-off-by: Dave Jones <davej@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michael Holzheu <holzheu@de.ibm.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10[PATCH] fix oddball boolean logic in s390 netiucvDave Jones1-1/+1
Signed-off-by: Dave Jones <davej@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Andreas Herrmann <aherrman@de.ibm.com> Cc: Michael Holzheu <holzheu@de.ibm.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10[PATCH] s390: move var declarations behind ifdefSerge E. Hallyn1-0/+2
Two variables in drivers/s390/net/qeth_main.c:qeth_send_packet() are only used if CONFIG_QETH_PERF_STATS. Move their definition under the same ifdef to remove compiler warning. Signed-off-by: Serge Hallyn <serue@us.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-08[NET] gso: Add skb_is_gsoHerbert Xu1-1/+1
This patch adds the wrapper function skb_is_gso which can be used instead of directly testing skb_shinfo(skb)->gso_size. This makes things a little nicer and allows us to change the primary key for indicating whether an skb is GSO (if we ever want to do that). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-03[PATCH] zfcp: fix incorrect usage of fsf_req_list_lockHeiko Carstens1-4/+5
================================= [ INFO: inconsistent lock state ] --------------------------------- inconsistent {in-hardirq-W} -> {hardirq-on-W} usage. swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (&adapter->fsf_req_list_lock){++..}, at: [<0000000000274486>] zfcp_qdio_reqid_check+0x46/0x178 {in-hardirq-W} state was registered at: [<000000000005fb0c>] __lock_acquire+0xad8/0xed0 [<00000000000604ae>] lock_acquire+0x9a/0xc8 [<000000000035a326>] _spin_lock+0x4e/0x68 [<0000000000274486>] zfcp_qdio_reqid_check+0x46/0x178 [<000000000027469e>] zfcp_qdio_response_handler+0xe6/0x430 [<0000000000219dd4>] tiqdio_thinint_handler+0xd20/0x213c [<000000000020229a>] do_adapter_IO+0xb2/0xc0 [<0000000000206f32>] do_IRQ+0x136/0x16c [<0000000000020462>] io_no_vtime+0x16/0x1c [<0000000000019432>] cpu_idle+0x222/0x250 irq event stamp: 129220 hardirqs last enabled at (129220): [<00000000000411e6>] tasklet_hi_action+0x5a/0x19c hardirqs last disabled at (129219): [<00000000000411c0>] tasklet_hi_action+0x34/0x19c softirqs last enabled at (129212): [<0000000000040b62>] __do_softirq+0x13a/0x180 softirqs last disabled at (129217): [<000000000001fd58>] do_softirq+0xec/0xf0 other info that might help us debug this: no locks held by swapper/0. stack backtrace: 00000000012bb670 0000000000000002 0000000000000000 00000000012bb780 00000000012bb6e8 0000000000399122 0000000000399122 0000000000016b0a 0000000000000000 0000000000000000 0000000000000000 00000000004660e8 0000000000000000 000000000000000d 00000000012bb6e0 00000000012bb758 0000000000368b90 0000000000016b0a 00000000012bb6e0 00000000012bb730 Call Trace: ([<0000000000016a26>] show_trace+0x76/0xdc) [<0000000000016b2c>] show_stack+0xa0/0xd0 [<0000000000016b8a>] dump_stack+0x2e/0x3c [<000000000005e3da>] print_usage_bug+0x27e/0x290 [<000000000005ea9c>] mark_lock+0x6b0/0x6c0 [<000000000005f33e>] __lock_acquire+0x30a/0xed0 [<00000000000604ae>] lock_acquire+0x9a/0xc8 [<000000000035a326>] _spin_lock+0x4e/0x68 [<0000000000274486>] zfcp_qdio_reqid_check+0x46/0x178 [<000000000027469e>] zfcp_qdio_response_handler+0xe6/0x430 [<0000000000217bd2>] tiqdio_tl+0xd02/0x2120 [<000000000004123a>] tasklet_hi_action+0xae/0x19c [<0000000000040ae4>] __do_softirq+0xbc/0x180 [<000000000001fd58>] do_softirq+0xec/0xf0 [<0000000000040c38>] irq_exit+0x90/0xa8 [<0000000000206f40>] do_IRQ+0x144/0x16c [<0000000000020462>] io_no_vtime+0x16/0x1c [<0000000000019432>] cpu_idle+0x222/0x250 ([<0000000000019416>] cpu_idle+0x206/0x250) [<000000000001405a>] rest_init+0x5a/0x68 [<0000000000536998>] start_kernel+0x39c/0x3dc [<0000000000013046>] _stext+0x46/0x1000 Fix incorrect usage of fsf_req_list_lock. It's used in tasklet context (irqs on) as well as in irq context. Therefore use the spin_lock_irqsave variant to avoid deadlocks. Acked-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03[PATCH] zfcp: fix incorrect usage of erp_lockHeiko Carstens1-4/+4
================================= [ INFO: inconsistent lock state ] --------------------------------- inconsistent {hardirq-on-W} -> {in-hardirq-W} usage. swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes: (&adapter->erp_lock){+-..}, at: [<000000000026c7f8>] zfcp_erp_async_handler+0x3c/0x70 {hardirq-on-W} state was registered at: [<000000000005f33e>] __lock_acquire+0x30a/0xed0 [<00000000000604ae>] lock_acquire+0x9a/0xc8 [<000000000035a7ae>] _write_lock+0x4e/0x68 [<000000000026d822>] zfcp_erp_adapter_strategy_generic+0x286/0xd94 [<000000000026fd72>] zfcp_erp_strategy_do_action+0x91e/0x1a94 [<0000000000271a3a>] zfcp_erp_thread+0x21a/0x1568 [<0000000000019096>] kernel_thread_starter+0x6/0xc [<0000000000019090>] kernel_thread_starter+0x0/0xc irq event stamp: 12078 hardirqs last enabled at (12077): [<0000000000019416>] cpu_idle+0x206/0x250 hardirqs last disabled at (12078): [<0000000000020458>] io_no_vtime+0xc/0x1c softirqs last enabled at (12072): [<0000000000040b62>] __do_softirq+0x13a/0x180 softirqs last disabled at (12059): [<000000000001fd58>] do_softirq+0xec/0xf0 other info that might help us debug this: no locks held by swapper/0. stack backtrace: 00000000012bb648 0000000000000002 0000000000000000 00000000012bb758 00000000012bb6c0 0000000000399122 0000000000399122 0000000000016b0a 0000000000000000 0000000000000001 0000000000000000 00000000004660e8 0000000000000000 000000000000000d 00000000012bb6b8 00000000012bb730 0000000000368b90 0000000000016b0a 00000000012bb6b8 00000000012bb708 Call Trace: ([<0000000000016a26>] show_trace+0x76/0xdc) [<0000000000016b2c>] show_stack+0xa0/0xd0 [<0000000000016b8a>] dump_stack+0x2e/0x3c [<000000000005e3da>] print_usage_bug+0x27e/0x290 [<000000000005e934>] mark_lock+0x548/0x6c0 [<000000000005fb0c>] __lock_acquire+0xad8/0xed0 [<00000000000604ae>] lock_acquire+0x9a/0xc8 [<000000000035a662>] _write_lock_irqsave+0x62/0x80 [<000000000026c7f8>] zfcp_erp_async_handler+0x3c/0x70 [<0000000000279178>] zfcp_fsf_req_dispatch+0xd8/0x1fa8 [<000000000027e538>] zfcp_fsf_req_complete+0x104/0xe4c [<0000000000274534>] zfcp_qdio_reqid_check+0xf4/0x178 [<000000000027469e>] zfcp_qdio_response_handler+0xe6/0x430 [<0000000000219dd4>] tiqdio_thinint_handler+0xd20/0x213c [<000000000020229a>] do_adapter_IO+0xb2/0xc0 [<0000000000206f32>] do_IRQ+0x136/0x16c [<0000000000020462>] io_no_vtime+0x16/0x1c [<0000000000019432>] cpu_idle+0x222/0x250 ([<0000000000019416>] cpu_idle+0x206/0x250) [<000000000001405a>] rest_init+0x5a/0x68 [<0000000000536998>] start_kernel+0x39c/0x3dc [<0000000000013046>] _stext+0x46/0x1000 Fix incorrect usage of erp_lock. Using the write_lock() variant is wrong, since this might lead to deadlocks. Acked-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03[PATCH] lockdep: annotate qeth driverHeiko Carstens1-0/+6
Annotate the qeth driver which uses a private skb-queue-head that is safely used in hardirq context too. Has no effect on non-lockdep kernels. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03[PATCH] lockdep: s390 turn validator off in machine-check handlerHeiko Carstens1-0/+3
Machine checks on s390 are always enabled (except in the machine check handler itself). Therefore use lockdep_off()/on() in the machine check handler to avoid deadlocks in the lock validator. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03[PATCH] lockdep: irqtrace subsystem, s390 supportHeiko Carstens2-5/+7
irqtrace support for s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel46-46/+0
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6Linus Torvalds7-17/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6: (22 commits) [PATCH] devfs: Remove it from the feature_removal.txt file [PATCH] devfs: Last little devfs cleanups throughout the kernel tree. [PATCH] devfs: Rename TTY_DRIVER_NO_DEVFS to TTY_DRIVER_DYNAMIC_DEV [PATCH] devfs: Remove the tty_driver devfs_name field as it's no longer needed [PATCH] devfs: Remove the line_driver devfs_name field as it's no longer needed [PATCH] devfs: Remove the videodevice devfs_name field as it's no longer needed [PATCH] devfs: Remove the gendisk devfs_name field as it's no longer needed [PATCH] devfs: Remove the miscdevice devfs_name field as it's no longer needed [PATCH] devfs: Remove the devfs_fs_kernel.h file from the tree [PATCH] devfs: Remove devfs_remove() function from the kernel tree [PATCH] devfs: Remove devfs_mk_cdev() function from the kernel tree [PATCH] devfs: Remove devfs_mk_bdev() function from the kernel tree [PATCH] devfs: Remove devfs_mk_symlink() function from the kernel tree [PATCH] devfs: Remove devfs_mk_dir() function from the kernel tree [PATCH] devfs: Remove devfs_*_tape() functions from the kernel tree [PATCH] devfs: Remove devfs support from the sound subsystem [PATCH] devfs: Remove devfs support from the ide subsystem. [PATCH] devfs: Remove devfs support from the serial subsystem [PATCH] devfs: Remove devfs from the init code [PATCH] devfs: Remove devfs from the partition code ...
2006-06-29[S390] rework of channel measurement facility.Cornelia Huck3-177/+468
Fixes for several channel measurement facility bugs: * Blocks copied from the hardware might not be consistent. Solve this by moving the copying into idle state and repeating the copying. * avg_sample_interval changed with every read, even though no new block was available. Solve this by storing a timestamp when the last new block was received. * Several locking issues. * Measurements were not reenabled after a disconnected device became available again. * Remove #defines for ioctls that were never implemented. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29[S390] add PAV support to the dasd driver.Horst Hummel6-87/+222
Add support for parallel-access-volumes to the dasd driver. This allows concurrent access to dasd devices with multiple channel programs. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29[S390] cio chpid offline.Cornelia Huck3-3/+5
After setting a path to a dasd offline at the SE, I/O hangs on that dasd for 5 minutes, then continues. I/O for which an interrupt will not be reported after the channel path has been disabled was not terminated by the common I/O layer, causing the dasd MIH to hit after 5 minutes. Be more aggressive in terminating I/O after setting a channel path offline. Also make sure to generate a fake irb if the device driver issues an I/O request after being notified of the killed I/O and clear residual information from the irb before trying to start the delayed verification. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29Convert s390_collect_crw_info() in s390mach.c from being startedSerge E. Hallyn1-3/+2
as a deprecated kernel_thread to a kthread. Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29[S390] dasd eer data format.Stefan Weinhuber1-1/+1
The struct dasd_eer_header needs the packed attribute, or there will be 6 additional bytes of random data between the fixed header and the variable length part of the eer data. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29[S390] dasd whitespace and other cosmetics.Horst Hummel15-304/+173
Dasd code cleanup: 1) remove white space, 2) remove the emacs override sections, and 3) use kzalloc instead of kmalloc. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29[S390] dasd_eckd_dump_sense bug.Horst Hummel1-71/+74
The ccw dump function dasd_eckd_dump_ccw_range can crash because it does not take care about the IDAL flag in the ccw. Check for IDALs flag set in CCW and follow the indirect list to print the data that is refered by the ccw. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29[S390] missing check in dasd_eer_open.Stefan Weinhuber1-0/+2
Check the return value of kzalloc in dasd_eer_open. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29[S390] modular 3270 driver.Martin Schwidefsky1-33/+34
The initial i/o to a 3270 device is done using the static module variables raw3270_init_data and raw3270_init_request. If the 3270 device driver is built as a module and gets loaded above 2GB, the initial i/o will fail because these variables will get addresses > 2GB. To make it work the two variables are moved to struct raw3270 and the data structure is allocated with GFP_DMA. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29[S390] cio async subchannel reprobe.Peter Oberparleiter4-36/+72
Changes in the DASD driver require an asynchronous implementation of the subchannel reprobe loop. This loop was so far only used by the blacklisting mechanism but is now available to all CCW device drivers. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29[S390] ccwgroup device unregister.Cornelia Huck1-7/+10
Work around the problem that a device cannot be unregistered from driver_for_each_device() because of klist node refcounting: Get device after device owned by the driver to be unregistered with driver_find_device() and then unregister it. This works because driver_get_device() gets us out of the region of the elevated klist node refcount. driver_find_device() will always get the next device in the list after the found one has been unregistered. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29[S390] channel measurement fix.Cornelia Huck1-1/+2
Specify correct sizeof() in chp_measurement_read() and return correct amount of read data. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-29[S390] cio long busy in read configuration data.Peter Oberparleiter1-1/+6
Trying to set a DASD root device online can fail under some circumstances with the message "Read configuration data returned error -5". The cause is that read configuration data incorrectly aborts with -EIO when it encounters a temporary busy condition at a storage server. Perform retry when encountering temporary busy conditions. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-27[PATCH] spin/rwlock init cleanupsIngo Molnar1-1/+1
locking init cleanups: - convert " = SPIN_LOCK_UNLOCKED" to spin_lock_init() or DEFINE_SPINLOCK() - convert rwlocks in a similar manner this patch was generated automatically. Motivation: - cleanliness - lockdep needs control of lock initialization, which the open-coded variants do not give - it's also useful for -rt and for lock debugging in general Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds1-7/+7
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: typo fixes Clean up 'inline is not at beginning' warnings for usb storage Storage class should be first i386: Trivial typo fixes ixj: make ixj_set_tone_off() static spelling fixes fix paniced->panicked typos Spelling fixes for Documentation/atomic_ops.txt move acknowledgment for Mark Adler to CREDITS remove the bouncing email address of David Campbell
2006-06-26[PATCH] devfs: Rename TTY_DRIVER_NO_DEVFS to TTY_DRIVER_DYNAMIC_DEVGreg Kroah-Hartman1-1/+1
I've always found this flag confusing. Now that devfs is no longer around, it has been renamed, and the documentation for when this flag should be used has been updated. Also fixes all drivers that use this flag. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26[PATCH] devfs: Remove the tty_driver devfs_name field as it's no longer neededGreg Kroah-Hartman1-1/+0
Also fixes all drivers that set this field. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26[PATCH] devfs: Remove the gendisk devfs_name field as it's no longer neededGreg Kroah-Hartman2-3/+0
And remove the now unneeded number field. Also fixes all drivers that set these fields. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26[PATCH] devfs: Remove the miscdevice devfs_name field as it's no longer neededGreg Kroah-Hartman2-2/+0
Also fixes all drivers that set this field. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26[PATCH] devfs: Remove the devfs_fs_kernel.h file from the treeGreg Kroah-Hartman2-2/+0
Also fixes up all files that #include it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26[PATCH] devfs: Remove devfs_remove() function from the kernel treeGreg Kroah-Hartman2-3/+0
Removes the devfs_remove() function and all callers of it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26[PATCH] devfs: Remove devfs_mk_dir() function from the kernel treeGreg Kroah-Hartman2-5/+0
Removes the devfs_mk_dir() function and all callers of it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26[PATCH] drivers: use list_move()Akinobu Mita1-4/+3
This patch converts the combination of list_del(A) and list_add(A, B) to list_move(A, B) under drivers/. Acked-by: Corey Minyard <minyard@mvista.com> Cc: Ben Collins <bcollins@debian.org> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Alasdair Kergon <dm-devel@redhat.com> Cc: Gerd Knorr <kraxel@bytesex.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Frank Pavlic <fpavlic@de.ibm.com> Acked-by: Matthew Wilcox <matthew@wil.cx> Cc: Andrew Vasquez <linux-driver@qlogic.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: Akinobu Mita <mita@miraclelinux.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26spelling fixesAndreas Mohr1-7/+7
acquired (aquired) contiguous (contigious) successful (succesful, succesfull) surprise (suprise) whether (weather) some other misspellings Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-25[PATCH] kernel/sys.c: cleanupsAdrian Bunk1-2/+1
- proper prototypes for the following functions: - ctrl_alt_del() (in include/linux/reboot.h) - getrusage() (in include/linux/resource.h) - make the following needlessly global functions static: - kernel_restart_prepare() - kernel_kexec() [akpm@osdl.org: compile fix] Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[NET]: Merge TSO/UFO fields in sk_buffHerbert Xu3-9/+9
Having separate fields in sk_buff for TSO/UFO (tso_size/ufo_size) is not going to scale if we add any more segmentation methods (e.g., DCCP). So let's merge them. They were used to tell the protocol of a packet. This function has been subsumed by the new gso_type field. This is essentially a set of netdev feature bits (shifted by 16 bits) that are required to process a specific skb. As such it's easy to tell whether a given device can process a GSO skb: you just have to and the gso_type field and the netdev's features field. I've made gso_type a conjunction. The idea is that you have a base type (e.g., SKB_GSO_TCPV4) that can be modified further to support new features. For example, if we add a hardware TSO type that supports ECN, they would declare NETIF_F_TSO | NETIF_F_TSO_ECN. All TSO packets with CWR set would have a gso_type of SKB_GSO_TCPV4 | SKB_GSO_TCPV4_ECN while all other TSO packets would be SKB_GSO_TCPV4. This means that only the CWR packets need to be emulated in software. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-21Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds14-619/+204
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (85 commits) [SCSI] 53c700: remove reliance on deprecated cmnd fields [SCSI] hptiop: don't use cmnd->bufflen [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver [SCSI] aacraid: small misc. cleanups [SCSI] aacraid: Update supported product information [SCSI] aacraid: Fix return code interpretation [SCSI] scsi_transport_sas: fix panic in sas_free_rphy [SCSI] remove RQ_SCSI_* flags [SCSI] remove scsi_request infrastructure [SCSI] mptfusion: change driver revision to 3.03.10 [SCSI] mptfc: abort of board reset leaves port dead requiring reboot [SCSI] mptfc: fix fibre channel infinite request/response loop [SCSI] mptfc: set fibre channel fw target missing timers to one second [SCSI] mptfusion: move fc event/reset handling to mptfc [SCSI] spi transport: don't allow dt to be set on SE or HVD buses [SCSI] aic7xxx: expose the bus setting to sysfs [SCSI] scsi: remove Documentation/scsi/cpqfc.txt [SCSI] drivers/scsi: Use ARRAY_SIZE macro [SCSI] Remove last page_address from dc395x.c [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver ... Fixed up conflicts in drivers/message/fusion/mptbase.c manually (due to the sparc interrupt cleanups)
2006-06-20Merge git://git.infradead.org/hdrcleanup-2.6Linus Torvalds1-183/+2
* git://git.infradead.org/hdrcleanup-2.6: (63 commits) [S390] __FD_foo definitions. Switch to __s32 types in joystick.h instead of C99 types for consistency. Add <sys/types.h> to headers included for userspace in <linux/input.h> Move inclusion of <linux/compat.h> out of user scope in asm-x86_64/mtrr.h Remove struct fddi_statistics from user view in <linux/if_fddi.h> Move user-visible parts of drivers/s390/crypto/z90crypt.h to include/asm-s390 Revert include/media changes: Mauro says those ioctls are only used in-kernel(!) Include <linux/types.h> and use __uXX types in <linux/cramfs_fs.h> Use __uXX types in <linux/i2o_dev.h>, include <linux/ioctl.h> too Remove private struct dx_hash_info from public view in <linux/ext3_fs.h> Include <linux/types.h> and use __uXX types in <linux/affs_hardblocks.h> Use __uXX types in <linux/divert.h> for struct divert_blk et al. Use __u32 for elf_addr_t in <asm-powerpc/elf.h>, not u32. It's user-visible. Remove PPP_FCS from user view in <linux/ppp_defs.h>, remove __P mess entirely Use __uXX types in user-visible structures in <linux/nbd.h> Don't use 'u32' in user-visible struct ip_conntrack_old_tuple. Use __uXX types for S390 DASD volume label definitions which are user-visible S390 BIODASDREADCMB ioctl should use __u64 not u64 type. Remove unneeded inclusion of <linux/time.h> from <linux/ufs_fs.h> Fix private integer types used in V4L2 ioctls. ... Manually resolve conflict in include/linux/mtd/physmap.h
2006-06-10Merge ../linux-2.6James Bottomley28-703/+911
2006-06-08Merge branch 'master' into upstreamJeff Garzik2-3/+3
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 06:07:21 +0000