summaryrefslogtreecommitdiff
path: root/drivers/power
AgeCommit message (Collapse)AuthorFilesLines
2008-10-20Merge git://git.infradead.org/battery-2.6Linus Torvalds5-6/+422
* git://git.infradead.org/battery-2.6: bq27x00_battery: use unaligned access helper power_supply: fix dependency of tosa_battery power_supply: Support for Texas Instruments BQ27200 battery managers power_supply: Add function to return system-wide power state pda_power: Check and handle return value of set_irq_wake
2008-10-20x86: sysfs: kill owner field from attributeParag Warudkar1-1/+1
Tejun's commit 7b595756ec1f49e0049a9e01a1298d53a7faaa15 made sysfs attribute->owner unnecessary. But the field was left in the structure to ease the merge. It's been over a year since that change and it is now time to start killing attribute->owner along with its users - one arch at a time! This patch is attempt #1 to get rid of attribute->owner only for CONFIG_X86_64 or CONFIG_X86_32 . We will deal with other arches later on as and when possible - avr32 will be the next since that is something I can test. Compile (make allyesconfig / make allmodconfig / custom config) and boot tested. akpm: the idea is that we put the declaration of sttribute.owner inside `#ifndef CONFIG_X86'. But that proved to be too ambitious for now because new usages kept on turning up in subsystem trees. [akpm: remove the ifdef for now] Signed-off-by: Parag Warudkar <parag.lkml@gmail.com> Cc: Greg KH <greg@kroah.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tejun Heo <htejun@gmail.com> Cc: Len Brown <lenb@kernel.org> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-18Merge branch 'master' of ↵Anton Vorontsov6-217/+287
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/power/Makefile
2008-10-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds1-2/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (46 commits) UIO: Fix mapping of logical and virtual memory UIO: add automata sercos3 pci card support UIO: Change driver name of uio_pdrv UIO: Add alignment warnings for uio-mem Driver core: add bus_sort_breadthfirst() function NET: convert the phy_device file to use bus_find_device_by_name kobject: Cleanup kobject_rename and !CONFIG_SYSFS kobject: Fix kobject_rename and !CONFIG_SYSFS sysfs: Make dir and name args to sysfs_notify() const platform: add new device registration helper sysfs: use ilookup5() instead of ilookup5_nowait() PNP: create device attributes via default device attributes Driver core: make bus_find_device_by_name() more robust usb: turn dev_warn+WARN_ON combos into dev_WARN debug: use dev_WARN() rather than WARN_ON() in device_pm_add() debug: Introduce a dev_WARN() function sysfs: fix deadlock device model: Do a quickcheck for driver binding before doing an expensive check Driver core: Fix cleanup in device_create_vargs(). Driver core: Clarify device cleanup. ...
2008-10-16olpc: olpc_battery.c sparse endian annotationsHarvey Harrison1-12/+8
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Andres Salomon <dilinger@queued.net> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16device create: misc: convert device_create_drvdata to device_createGreg Kroah-Hartman1-2/+2
Now that device_create() has been audited, rename things back to the original call to be sane. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-12Fix Kconfig dependency for WM97xx battery driverLinus Torvalds1-1/+1
It needs the WM97xx touchscreen driver to be compiled in, not as a module. And it cannot itself be a module, due to some unfortunate interactions with platform data. Reported-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-02[ARM] 5248/1: wm97xx generic battery driverMarek Vašut4-203/+277
This patch adds generic battery driver for wm97xx chips. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-26bq27x00_battery: use unaligned access helperHarvey Harrison1-3/+2
Remove hand-rolled get_unaligned_be16, this points to a possible bug as bq27x00_read does another endian byteswap which sparse notices: drivers/power/bq27x00_battery.c:81:14: warning: cast to restricted __be16 Which should probably be checked. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-09-26power_supply: fix dependency of tosa_batteryDmitry Baryshkov1-1/+1
tosa_battery should also depend on wm97xx_ts as it uses dac-accessing functions from that module. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-09-01power_supply: Support for Texas Instruments BQ27200 battery managersRodolfo Giometti3-0/+389
These battery managers came in two different packages: one for I2C busses (BQ27200) and one for HDQ busses (BQ27000). This driver currently supports only the I2C chip version but the code is designed in order to easily allow the HDQ chip version integration. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: make things static, use kasprintf()] Signed-off-by: Rodolfo Giometti <giometti@linux.it> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-09-01power_supply: Add function to return system-wide power stateMatthew Garrett1-0/+25
Certain drivers benefit from knowing whether the system is on ac or battery, for instance when determining which backlight registers to read. This adds a simple call to determine whether there's an online power supply other than any batteries. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-09-01pda_power: Check and handle return value of set_irq_wakeRobert Jarzmik1-4/+7
The recent change in commit 2db873211ba47ef704c301f9ecf4a33413a0b649 forces the calls enable_irq_wake() and disable_irq_wake() to be balanced. But if in pda_power_suspend() the call to enable_irq_wake() fails (because attached gpio cannot wake up the CPU), the corresponding disable_irq_wake will WARN(). Fix it by storing success/failure of enable_irq_wake(). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King2-2/+2
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-30Merge branch 'master' of /home/cbou/linux-2.6Anton Vorontsov8-8/+215
Conflicts: drivers/power/Kconfig drivers/power/Makefile
2008-07-25drivers/power: fix platform driver hotplug/coldplugKay Sievers2-0/+4
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf ("platform: prefix MODALIAS with "platform:"), the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable "power" drivers drivers, to re-enable auto loading. [dbrownell@users.sourceforge.net: one was missing] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds3-0/+205
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (85 commits) [ARM] pxa: add base support for PXA930 Handheld Platform (aka SAAR) [ARM] pxa: add base support for PXA930 Evaluation Board (aka TavorEVB) [ARM] pxa: add base support for PXA930 (aka Tavor-P) [ARM] Update mach-types [ARM] pxa: make littleton to use the new smc91x platform data [ARM] pxa: make zylonite to use the new smc91x platform data [ARM] pxa: make mainstone to use the new smc91x platform data [ARM] pxa: make lubbock to use new smc91x platform data [NET] smc91x: prepare SMC_USE_PXA_DMA to be specified in platform data [NET] smc91x: prepare for SMC_IO_SHIFT to be a platform configurable variable [NET] smc91x: add SMC91X_NOWAIT flag to platform data [NET] smc91x: favor the use of SMC91X_USE_* instead of SMC_CAN_USE_* [NET] smc91x: remove "irq_flags" from "struct smc91x_platdata" [ARM] 5146/1: pxa2xx: convert all boards to call pxa2xx_transceiver_mode helper Support for LCD on e740 e750 e400 and e800 e-series PDAs E-series UDC support PXA UDC - allow use of inverted GPIO for pullup Add e350 support Fix broken e-series build E-series GPIO / IRQ definitions. ...
2008-07-21Driver Core: add ability for class_for_each_device to start in middle of listGreg Kroah-Hartman2-3/+3
This mirrors the functionality that driver_for_each_device has as well. We add a start variable, and all callers of the function are fixed up at the same time. The block layer will be using this new functionality in a follow-on patch. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-10[ARM] 5155/1: PalmTX battery monitorMarek Vašut3-0/+205
This patch adds battery monitoring driver for PalmTX. It can read voltage from the battery and temperature. It also monitors charging/discharging status. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-01power_supply: Sharp SL-6000 (tosa) batteries supportDmitry Baryshkov3-0/+494
This patch adds common battery interface support for Sharp SL-6000 (tosa). Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-06-10power_supply: Fix race in power_supply_ueventDmitry Baryshkov1-1/+1
Commit 54d29ad33e3483bcc7ca433a21cf294854e5154a (Power Supply: fix race in device_create) introduced a race in power_supply_uevent. Previously it checked that power_supply is available by checking for dev->driver_data. But now dev->driver_data is set before power_supply->dev is initialised. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-05-20Power Supply: fix race in device_createGreg Kroah-Hartman1-4/+2
There is a race from when a device is created with device_create() and then the drvdata is set with a call to dev_set_drvdata() in which a sysfs file could be open, yet the drvdata will be NULL, causing all sorts of bad things to happen. This patch fixes the problem by using the new function, device_create_drvdata(). Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-19power_supply: fix up CHARGE_COUNTER output to be more preciseAndres Salomon1-2/+2
As Richard Smith pointed out, ACR * 6250 / 15 provides for less precision loss than ACR * 4167 / 10, _and_ it doesn't overflow. Switch to using that equation for CHARGE_COUNTER. Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: "Richard A. Smith" <richard@laptop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-05-13power_supply: add CHARGE_COUNTER property and olpc_battery support for itAndres Salomon2-1/+11
This adds PROP_CHARGE_COUNTER to the power supply class (documenting it as well). The OLPC battery driver uses this for spitting out its ACR values (in uAh). We have some rounding errors (the data sheet claims 416.7, the math actually works out to 416.666667, so we're forced to choose between overflows or precision loss. I chose precision loss, and stuck w/ data sheet values), but I don't think anyone will care that much. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-05-04power_supply: bump EC version check that we refuse to run with in olpc_batteryAndres Salomon1-2/+8
Refuse to run with an EC < 0x44. We're playing it safe, and this is a pretty old EC version. Also, add a comment about why we're checking the EC version. Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-05-04power_supply: cleanup of the OLPC battery driverAndres Salomon1-73/+118
Move portions of the massive switch statement into functions. The layout of this thing has already caused one bug (a break in the wrong place), it needed to shrink. Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-05-04power_supply: add eeprom dump file to olpc_battery's sysfsAndres Salomon1-0/+49
This allows you to dump 0x60 bytes from the battery's EEPROM (starting at address 0x20). Note that it does an EC command for each byte, so it's pretty slow. OTOH, if you want to grab just a single byte from somewhere in the EEPROM, you can do something like: dd bs=1 count=1 skip=16 if=/sys/class/power_supply/olpc-battery/eeprom | od -x Userspace battery collection/logging information needs this. Signed-off-by: Andres Salomon <dilinger@debian.org> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-05-04power_supply: Support serial number in olpc_batteryDavid Woodhouse1-0/+12
This adds serial number support to the OLPC battery driver. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-05-03Merge git://git.infradead.org/battery-2.6Linus Torvalds2-1/+12
* git://git.infradead.org/battery-2.6: PMU battery: filenames in sysfs with spaces pda_power: add init and exit function callbacks
2008-05-03PMU battery: filenames in sysfs with spacesChristian Kujau1-1/+1
By changing drivers/power/pmu_battery.c I now have '_' instead of ' ' (spaces) in /sys: /sys/devices/platform/pmu-battery.0/power_supply/PMU_battery_0 /sys/class/power_supply/PMU_battery_0 I'm still not sure if some userspace tool out there uses the old paths and will break now. Signed-off-by: Christian Kujau <lists@nerdbynature.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-05-03pda_power: add init and exit function callbacksPhilipp Zabel1-0/+11
This adds init/exit function callbacks to pda_power, to provide a place where the platform code can request/free GPIOs that it wants to use in the is_ac_online, is_usb_online and set_charge functions. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2008-04-29x86: olpc: add One Laptop Per Child architecture supportAndres Salomon1-2/+0
This adds support for OLPC XO hardware. Open Firmware on XOs don't contain the VSA, so it is necessary to emulate the PCI BARs in the kernel. This also adds functionality for running EC commands, and a CONFIG_OLPC. A number of OLPC drivers depend upon CONFIG_OLPC. olpc_ec_timeout is a hack to work around Embedded Controller bugs. [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: geode_has_vsa build fix] [akpm@linux-foundation.org: olpc_register_battery_callback doesn't exist] Signed-off-by: Andres Salomon <dilinger@debian.org> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <ak@suse.de> Cc: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29power: replace remaining __FUNCTION__ occurrencesHarvey Harrison3-7/+7
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Greg KH <greg@kroah.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Merge branch 'release' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (112 commits) ACPI: fix build warning Revert "cpuidle: build fix for non-x86" ACPI: update intrd DSDT override console messages ACPI: update DSDT override documentation ACPI: Add "acpi_no_initrd_override" kernel parameter ACPI: its a directory not a folder.... ACPI: misc cleanups ACPI: add missing prink prefix strings ACPI: cleanup acpi.h ACPICA: fix CONFIG_ACPI_DEBUG_FUNC_TRACE build ACPI: video: Ignore ACPI video devices that aren't present in hardware ACPI: video: reset brightness on resume ACPI: video: call ACPI notifier chain for ACPI video notifications ACPI: create notifier chain to get hotkey events to graphics driver ACPI: video: delete unused display switch on hotkey event code ACPI: video: create "brightness_switch_enabled" modparam cpuidle: Add a poll_idle method ACPI: cpuidle: Support C1 idle time accounting ACPI: enable MWAIT for C1 idle ACPI: idle: Fix acpi_safe_halt usages and interrupt enabling/disabling ...
2008-02-07power_supply: remove capacity_level from list of sysfs attributesThadeu Lima de Souza Cascardo1-1/+0
This commit: commit 8efe444038a205e79b38b7ad03878824901849a8 Author: Andres Salomon <dilinger@queued.net> Date: Wed Dec 12 14:12:56 2007 -0500 power: remove POWER_SUPPLY_PROP_CAPACITY_LEVEL Removed CAPACITY_LEVEL from every other code, leaving the array with sysfs attributes with one more entry than the number of enums in power_supply.h. This leads to some attributes containing the value of the attribute right after it. For example, temp_ambient would have the value of time_to_empty_now. In my case, I had time_to_full_avg have the value which should be in model_name, when the former was usually empty. Cc: Andres Salomon <dilinger@debian.org> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05ACPI: battery: add sysfs serial numbermaximilian attems1-0/+1
egrep serial /proc/acpi/battery/BAT0/info serial number: 32090 serial number can tell you from the imminent danger of beeing set on fire. Signed-off-by: maximilian attems <max@stro.at> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-02apm_power: check I.intval for zero value, we use it as the divisorAnton Vorontsov1-0/+3
Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02pda_power: implement pollingAnton Vorontsov1-1/+45
Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02pda_power: various cleanupsAnton Vorontsov1-55/+92
- handle spurious interrupts correctly; - get rid of pda_power_supplies array, use two variables instead; - factor out psy_changed() function, it will be used for polling. Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02apm_power: support using VOLTAGE_* properties for apm calculationsDmitry Baryshkov1-21/+70
It's pretty dummy, but useful for batteries for which we can only get voltages. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02pda_power: add suspend/resume supportDmitry Baryshkov1-0/+33
Add suspend/resume/wakeup support for pda_power. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02power_supply: add few more values and propsDmitry Baryshkov1-1/+4
Add LiMn (one of the most common for small non-rechargable batteries) battery technology and voltage_min/_max properties support. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02pda_power: only register available psuDmitry Baryshkov1-36/+44
Currently pda-power adds both ac and usb power supply units. This patch fixes it so that psu are added only if they are enabled. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02power: fix incorrect unregistration in power_supply_create_attrs error pathAndres Salomon1-4/+2
In power_supply_create_attrs(), we create static attributes as referenced by power_supply_static_attrs[i]. After that, if we fail, we unregister via power_supply_static_attrs[psy->properties[i]]. This is incorrect, as psy->properties has absolutely no bearing on static attribs. This patch fixes it to unregister the correct attrib. Another line which was unnecessarily line wrapped is also unwrapped. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-02power: remove POWER_SUPPLY_PROP_CAPACITY_LEVELAndres Salomon2-15/+0
The CAPACITY_LEVEL stuff defines various levels of charge; however, what is the difference between them? What differentiates between HIGH and NORMAL, LOW and CRITICAL, etc? As it appears that these are fairly arbitrary, we end up making such policy decisions in the kernel (or in hardware). This is the sort of decision that should be made in userspace, not in the kernel. If the hardware does not support _CAPACITY and it cannot be easily calculated, then perhaps the driver should register a custom CAPACITY_LEVEL attribute; however, userspace should not become accustomed to looking for such a thing, and we should certainly not encourage drivers to provide CAPACITY_LEVEL stubs. The following removes support for POWER_SUPPLY_PROP_CAPACITY_LEVEL. The OLPC battery driver is the only driver making use of this, so it's removed from there as well. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-02[BATTERY] power_supply_leds: use kasprintfAkinobu Mita1-18/+7
Use kasprintf instead of kmalloc()-strcpy()-strcat(). Cc: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-02-02[BATTERY] Every file should include the headers containing the prototypes ↵Adrian Bunk2-0/+4
for its global functions. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Anton Vorontsov <cbou@mail.ru>
2008-01-24power supply : use class iteration apiDave Young2-83/+107
Convert to use the class iteration api. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Cc: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-22Merge git://git.infradead.org/battery-2.6Linus Torvalds1-39/+102
* git://git.infradead.org/battery-2.6: apm_power: calculate to_full/to_empty time using energy apm_power: improve battery finding algorithm apm_power: fix obviously wrong logic for time reporting
2007-10-18Add missing newlines to some uses of dev_<level> messagesJoe Perches1-1/+1
Found these while looking at printk uses. Add missing newlines to dev_<level> uses Add missing KERN_<level> prefixes to multiline dev_<level>s Fixed a wierd->weird spelling typo Added a newline to a printk Signed-off-by: Joe Perches <joe@perches.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Tilman Schmidt <tilman@imap.cc> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: James Smart <James.Smart@Emulex.Com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 03:01:40 +0000