summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)AuthorFilesLines
2013-06-07Merge tag 'renesas-fixes-for-v3.10' of ↵Olof Johansson1-9/+36
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes From Simon Horman, Renesas ARM based SoC fixes for v3.10: - Correction to USB OVC and PENC pin groupings on r8a7779 SoC. This avoids conflicts when the USB_OVCn pins are used by another function. This has been observed to be a problem in v3.10-rc1. - Update CMT clock rating for sh73a0 SoC to resolve boot failure on kzm9g-reference. This resolves a regression between v3.9 and v3.10-rc1. * tag 'renesas-fixes-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: sh73a0: Update CMT clockevent rating to 80 sh-pfc: r8a7779: Don't group USB OVC and PENC pins Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-04sh-pfc: r8a7779: Don't group USB OVC and PENC pinsLaurent Pinchart1-9/+36
The USB_OVCn pins are alternate options for USB over-current detection when using a 3.3V USB interface. As they're not mandatory they can be used independently of the USB PENC pins. Don't group the USB_OVCn and PENC pins to avoid conflicts when the USB_OVCn pins are used by another function. Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-05-27pinctrl: pinconf: take the right mutexLinus Walleij1-2/+2
The pinconf_dgb_config_print() takes the per-pincontroller mutex, when what it wants to take is actually the pin maps mutex. Reported-by: James Hogan <james.hogan@imgtec.com> Cc: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27pinctrl: sunxi: fix error return code in sunxi_pinctrl_probe()Wei Yongjun1-1/+3
Fix to return a negative error code from the devm_clk_get() error handling case instead of 0, as done elsewhere in this function. Introduced by commit 950707c0eb5c7aeaa2c446a04c824f4be686d2f6 (pinctrl: sunxi: add clock support) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27pinctrl: exynos: Handle suspend/resume of GPIO EINT registersTomasz Figa2-3/+114
Some GPIO EINT control registers needs to be preserved across suspend/resume cycle. This patch extends the driver to take care of this. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27pinctrl: samsung: Allow per-bank SoC-specific private dataTomasz Figa1-0/+1
This patch extends pin bank descriptor structure with SoC-specific private data field that allows SoC-specific drivers to store their own private data. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27pinctrl: samsung: Add support for SoC-specific suspend/resume callbacksTomasz Figa2-0/+9
SoC-specific driver might require additional save and restore of registers. This patch adds pair of SoC-specific callbacks per pinctrl device to account for this. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27pinctrl: Don't override the error code in probe error handlingAxel Lin3-4/+5
Otherwise, we return 0 in probe error paths when gpiochip_remove() returns 0. Also show error message if gpiochip_remove() fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Tony Prisk <linux@prisktech.co.nz> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27pinctrl: exynos: Add support for set_irq_wake of wake-up EINTsTomasz Figa1-0/+23
This patch adds support of IRQ wake-up ability configuration for wake-up EINTs on Exynos SoCs. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27pinctrl: samsung: fix suspend/resume functionalityDoug Anderson2-0/+153
The GPIO states need to be restored after s2r and this is not currently supported in the pinctrl driver. This patch saves the gpio states before suspend and restores them after resume. Saving and restoring is done very early using syscore_ops and must happen before pins are released from their powerdown state. Patch originally from Prathyush K <prathyush.k@samsung.com> but rewritten by Doug Anderson <dianders@chromium.org>. Signed-off-by: Prathyush K <prathyush.k@samsung.com> Signed-off-by: Doug Anderson <dianders@chromium.org> Tested-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-20Merge tag 'pinctrl-fixes-v3.10-2' of ↵Linus Torvalds4-19/+19
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fixes from Linus Walleij: - Three fixes to make the boot path for device tree work properly on the Nomadik pin controller. - Compile warning fix for the vt8500 driver. - Fix error path in pinctrl-single. - Free mappings in error path of the Lantiq controller. - Documentation fixes. * tag 'pinctrl-fixes-v3.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl/lantiq: Free mapping configs for both pin and groups pinctrl: single: fix error return code in pcs_parse_one_pinctrl_entry() pinctrl: generic: Fix typos and clarify comments pinctrl: vt8500: Fix incorrect data in WM8750 pinctrl table pinctrl: abx500: Rejiggle platform data and DT initialisation pinctrl: abx500: Specify failed sub-driver by ID instead of driver_data
2013-05-18drivers/pinctrl: don't check resource with devm_ioremap_resourceWolfram Sang4-19/+0
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-05-15pinctrl/lantiq: Free mapping configs for both pin and groupsLaurent Pinchart1-1/+2
When creating mappings from DT both pin config and group config mappings are allocated. Free them both when destroying the mappings. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: John Crispin <blogic@openwrt.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-14pinctrl: single: fix error return code in pcs_parse_one_pinctrl_entry()Wei Yongjun1-1/+2
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Introduced by commit 9dddb4df90d136429b6d6ddefceb49a9b93f6cd1 (pinctrl: single: support generic pinconf) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-14pinctrl: vt8500: Fix incorrect data in WM8750 pinctrl tableTony Prisk1-1/+1
WMT_PIN_WAKEUP1 should be declared as WMT_PIN(0, 17) rather than WMT_PIN(0, 16). This currently generates a runtime warning because WMT_PIN_WAKEUP0 is already defined as WMT_PIN(0, 16). Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-14pinctrl: abx500: Rejiggle platform data and DT initialisationLee Jones1-14/+13
Platform Data is invariably populated for this driver, even when booting with Device Tree. Thus the Device Tree probing code encased within the first check for Platform Data will never executed, causing the driver to fail when DT is enabled. This patch fixes the aforementioned regression by rejigging the probe() semantics to attempt to extract a platform ID from Device Tree if one can not be sourced from platform data. A pointer to GPIO platform data is always passed to the driver now, so there's little point in checking for 'pdata' and executing the DT case if it's not there. The difference between booting with DT and !DT is when booting with DT, plat_id is not populated. Thus, in the DT case we have to use a DT match table in order to find out which platform we're executing on. So, we're changing the semantics here to only use the match table if no plat_id is supplied though platform data. Signed-off-by: Lee Jones <lee.jones@linaro.org> [edited commit message] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-14pinctrl: abx500: Specify failed sub-driver by ID instead of driver_dataLee Jones1-2/+1
If a sub-driver has not been specified correctly, there is a good chance that plat_id is NULL, hence using an attribute of plat_id in the error message is likely to not only fail the driver but Oops the kernel. Use the failed ID instead. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-09Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds1-13/+13
Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
2013-05-07Merge tag 'soc-for-linus-3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates (part 3) from Arnd Bergmann: "This is the third and smallest of the SoC specific updates. Changes include: - SMP support for the Xilinx zynq platform - Smaller imx changes - LPAE support for mvebu - Moving the orion5x, kirkwood, dove and mvebu platforms to a common "mbus" driver for their internal devices. It would be good to get feedback on the location of the "mbus" driver. Since this is used on multiple platforms may potentially get shared with other architectures (powerpc and arm64), it was moved to drivers/bus/. We expect other similar drivers to get moved to the same place in order to avoid creating more top-level directories under drivers/ or cluttering up the messy drivers/misc/ even more." * tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) ARM: imx: reset_controller may be disabled ARM: mvebu: Align the internal registers virtual base to support LPAE ARM: mvebu: Limit the DMA zone when LPAE is selected arm: plat-orion: remove addr-map code arm: mach-mv78xx0: convert to use the mvebu-mbus driver arm: mach-orion5x: convert to use mvebu-mbus driver arm: mach-dove: convert to use mvebu-mbus driver arm: mach-kirkwood: convert to use mvebu-mbus driver arm: mach-mvebu: convert to use mvebu-mbus driver ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock ARM i.MX53: tve_di clock is not part of the CCM, but of TVE ARM i.MX53: make tve_ext_sel propagate rate change to PLL ARM i.MX53: Remove unused tve_gate clkdev entry ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree ARM: i.MX5: Add PATA and SRTC clocks ARM: imx: do not bring up unavailable cores ARM: imx: add initial imx6dl support ARM: imx1: mm: add call to mxc_device_init ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS ...
2013-05-07Merge tag 'soc-for-linus-2' of ↵Linus Torvalds9-443/+2791
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates (part 2) from Arnd Bergmann: "These patches are all for Renesas shmobile, and depend on the earlier pinctrl updates. Remarkably, this adds support for three new SoCs: r8a73a4, r8a73a4 and r8a7778. The bulk of the code added for these is for pinctrl (using the new subsystem) and for clocks (not yet using the common clock subsystem). The latter will have to get converted in one of the upcoming releases, but shmobile is not ready for that yet. The series also contains Renesas shmobile board changes, adding one board file for each of the three new SoCs. These boards are using a mix of classic and device-tree based probing, as there is still a lot of infrastructure in shmobile that has not been converted to DT yet. Once those are resolved to the degree that no board specific setup code is needed, they can get folded into the respective SoC setup files." * tag 'soc-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (78 commits) ARM: shmobile: use r8a7790 timer setup code on Lager ARM: shmobile: force enable of r8a7790 arch timer ARM: shmobile: Add second I/O range for r8a7790 PFC ARM: shmobile: bockw: enable network settings on bootargs ARM: shmobile: bockw: add SMSC ethernet support ARM: shmobile: R8A7778: add Ether support ARM: shmobile: bockw: enable SMSC ethernet on defconfig ARM: shmobile: r8a7778: add r8a7778_init_irq_extpin() ARM: shmobile: r8a7778: remove pointless PLATFORM_INFO() ARM: shmobile: mackerel: clean up MMCIF vs. SDHI1 selection ARM: shmobile: mackerel: add interrupt names for SDHI0 ARM: shmobile: mackerel: switch SDHI and MMCIF interfaces to slot-gpio ARM: shmobile: mackerel: remove OCR masks, where regulators are used ARM: shmobile: mackerel: SDHI resources do not have to be numbered ARM: shmobile: Initial r8a7790 Lager board support ARM: shmobile: APE6EVM LAN9220 support ARM: shmobile: APE6EVM PFC support ARM: shmobile: APE6EVM base support ARM: shmobile: kzm9g-reference: add ethernet support ARM: shmobile: add R-Car M1A Bock-W platform support ...
2013-05-04Merge tag 'renesas-pinctrl-for-linus' of ↵Linus Torvalds22-4281/+7476
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC pinctrl changes for Renesas from Olof Johansson: "This is yet another driver change, which is split out just because of its size. As already in 3.9, a lot of changes are going on here, as the shmobile platform gets converted from its own pin control API to the generic drivers/pinctrl subsystem. Based on agreements with Paul Mundt, we are merging the sh-arch-side changes here as well" * tag 'renesas-pinctrl-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (142 commits) ARM: shmobile: r8a7779: Remove INTC function GPIOs ARM: shmobile: r8a7779: Remove LBSC function GPIOs ARM: shmobile: r8a7779: Remove USB function GPIOs ARM: shmobile: r8a7779: Remove HSPI function GPIOs ARM: shmobile: r8a7779: Remove SCIF function GPIOs ARM: shmobile: r8a7779: Remove SDHI and MMCIF function GPIOs ARM: shmobile: r8a7779: Remove DU function GPIOs ARM: shmobile: r8a7779: Remove DU1_DOTCLKOUT1 GPIO ARM: shmobile: r8a7740: Remove SDHI and MMCIF function GPIOs ARM: shmobile: r8a7740: Remove LCD0 and LCD1 function GPIOs ARM: shmobile: sh73a0: Remove IrDA function GPIOs ARM: shmobile: sh73a0: Remove USB function GPIOs ARM: shmobile: sh73a0: Remove BSC function GPIOs ARM: shmobile: sh73a0: Remove KEYSC function GPIOs ARM: shmobile: sh73a0: Remove pull-up function GPIOS ARM: shmobile: sh73a0: Remove FSI function GPIOs ARM: shmobile: sh73a0: Remove I2C function GPIOs ARM: shmobile: sh73a0: Remove SCIFA and SCIFB function GPIOs ARM: shmobile: sh73a0: Remove LCDC and LCDC2 function GPIOs ARM: shmobile: sh7372: Remove SDHI and MMCIF function GPIOs ...
2013-05-04Merge tag 'drivers-for-linus' of ↵Linus Torvalds16-11/+3098
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Olof Johansson: "This is a rather large set of patches for device drivers that for one reason or another the subsystem maintainer preferred to get merged through the arm-soc tree. There are both new drivers as well as existing drivers that are getting converted from platform-specific code into standalone drivers using the appropriate subsystem specific interfaces. In particular, we can now have pinctrl, clk, clksource and irqchip drivers in one file per driver, without the need to call into platform specific interface, or to get called from platform specific code, as long as all information about the hardware is provided through a device tree. Most of the drivers we touch this time are for clocksource. Since now most of them are part of drivers/clocksource, I expect that we won't have to touch these again from arm-soc and can let the clocksource maintainers take care of these in the future. Another larger part of this series is specific to the exynos platform, which is seeing some significant effort in upstreaming and modernization of its device drivers this time around, which unfortunately is also the cause for the churn and a lot of the merge conflicts. There is one new subsystem that gets merged as part of this series: the reset controller interface, which is a very simple interface for taking devices on the SoC out of reset or back into reset. Patches to use this interface on i.MX follow later in this merge window, and we are going to have other platforms (at least tegra and sirf) get converted in 3.11. This will let us get rid of platform specific callbacks in a number of platform independent device drivers." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits) irqchip: s3c24xx: add missing __init annotations ARM: dts: Disable the RTC by default on exynos5 clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3} ARM: exynos: restore mach/regs-clock.h for exynos5 clocksource: exynos_mct: fix build error on non-DT pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register() irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure reset: NULL deref on allocation failure reset: Add reset controller API dt: describe base reset signal binding ARM: EXYNOS: Add arm-pmu DT binding for exynos421x ARM: EXYNOS: Add arm-pmu DT binding for exynos5250 ARM: EXYNOS: Enable PMUs for exynos4 irqchip: exynos-combiner: Correct combined IRQs for exynos4 irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq ARM: EXYNOS: fix compilation error introduced due to common clock migration clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3} clk: exynos4: export clocks required for fimc-is clk: samsung: Fix compilation error clk: tegra: fix enum tegra114_clk to match binding ...
2013-05-02Merge tag 'pinctrl-fixes-v3.10-1' of ↵Linus Torvalds2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fixes from Linus Walleij: "Two fixes to the pinctrl subsystem for v3.10: - A quite apparent mutex fix in an untested codepath - A compile warning fix in the plgpio driver" * tag 'pinctrl-fixes-v3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: fix mutex deadlock in get_pinctrl_dev_from_of_node() pinctrl: plgpio: add CONFIG_PM_SLEEP to suspend/resume functions
2013-05-02Merge tag 'multiplatform-for-linus' of ↵Linus Torvalds1-8/+4
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform updates from Olof Johansson: "More multiplatform enablement for ARM platforms. The ones converted in this branch are: - bcm2835 - cns3xxx - sirf - nomadik - msx - spear - tegra - ux500 We're getting close to having most of them converted! One of the larger platforms remaining is Samsung Exynos, and there are a bunch of supporting patches in this merge window for it. There was a patch in this branch to a early version of multiplatform conversion, but it ended up being reverted due to need of more bake time. The revert commit is part of the branch since it would have required rebasing multiple dependent branches and they were stable by then" * tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits) mmc: sdhci-s3c: Fix operation on non-single image Samsung platforms clocksource: nomadik-mtu: fix up clocksource/timer Revert "ARM: exynos: enable multiplatform support" ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ" ARM: exynos: enable multiplatform support rtc: s3c: make header file local mtd: onenand/samsung: make regs-onenand.h file local thermal/exynos: remove unnecessary header inclusions mmc: sdhci-s3c: remove platform dependencies ARM: samsung: move mfc device definition to s5p-dev-mfc.c ARM: exynos: move debug-macro.S to include/debug/ ARM: exynos: prepare for sparse IRQ ARM: exynos: introduce EXYNOS_ATAGS symbol ARM: tegra: build assembly files with -march=armv7-a ARM: Push selects for TWD/SCU into machine entries ARM: ux500: build hotplug.o for ARMv7-a ARM: ux500: move to multiplatform ARM: ux500: make remaining headers local ARM: ux500: make irqs.h local to platform ARM: ux500: get rid of <mach/[hardware|db8500-regs].h> ...
2013-05-02Merge tag 'dt-for-linus' of ↵Linus Torvalds10-5893/+2693
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device-tree updates from Olof Johansson: "Part 1 of device-tree updates for 3.10. The bulk of the churn in this branch is due to i.MX moving from C-defined pin control over to device tree, which is a one-time conversion that will allow greater flexibility down the road. Besides that, there's PCI-e bindings for Marvell mvebu platforms and a handful of cleanups to tegra due to the new include file functionality of the device tree compiler" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (113 commits) arm: mvebu: PCIe Device Tree informations for Armada XP GP arm: mvebu: PCIe Device Tree informations for Armada 370 DB arm: mvebu: PCIe Device Tree informations for Armada 370 Mirabox arm: mvebu: PCIe Device Tree informations for Armada XP DB arm: mvebu: PCIe Device Tree informations for OpenBlocks AX3-4 arm: mvebu: add PCIe Device Tree informations for Armada XP arm: mvebu: add PCIe Device Tree informations for Armada 370 ARM: sunxi: unify osc24M_fixed and osc24M arm: vt8500: Add SDHC support to WM8505 DT ARM: dts: Add a 64 bits version of the skeleton device tree ARM: mvebu: Add Device Bus and CFI flash memory support to defconfig ARM: mvebu: Add support for NOR flash device on Openblocks AX3 board ARM: mvebu: Add support for NOR flash device on Armada XP-GP board ARM: mvebu: Add Device Bus support for Armada 370/XP SoC ARM: dts: imx6dl-wandboard: Add USB Host support ARM: dts: imx51 cpu node ARM: dts: Add missing imx27-phytec-phycore dtb target ARM: dts: Add NFC support for i.MX27 Phytec PCM038 module ARM: i.MX51: Add PATA support ARM: dts: Add initial support for Wandboard Dual-Lite ...
2013-05-02Merge tag 'cleanup-for-linus' of ↵Linus Torvalds5-7/+5
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanup from Olof Johansson: "Here is a collection of cleanup patches. Among the pieces that stand out are: - The deletion of h720x platforms - Split of at91 non-dt platforms to their own Kconfig file to keep them separate - General cleanups and refactoring of i.MX and MXS platforms - Some restructuring of clock tables for OMAP - Convertion of PMC driver for Tegra to dt-only - Some renames of sunxi -> sun4i (Allwinner A10) - ... plus a bunch of other stuff that I haven't mentioned" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits) ARM: i.MX: remove unused ARCH_* configs ARM i.MX53: remove platform ahci support ARM: sunxi: Rework the restart code irqchip: sunxi: Rename sunxi to sun4i irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro clocksource: sunxi: Rename sunxi to sun4i clocksource: sunxi: make use of CLKSRC_OF clocksource: sunxi: Cleanup the timer code ARM: at91: remove trailing semicolon from macros ARM: at91/setup: fix trivial typos ARM: EXYNOS: remove "config EXYNOS_DEV_DRM" ARM: EXYNOS: change the name of USB ohci header ARM: SAMSUNG: Remove unnecessary code for dma ARM: S3C24XX: Remove unused GPIO drive strength register definitions ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412 ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410 ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC" ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI" ...
2013-04-30pinctrl: fix mutex deadlock in get_pinctrl_dev_from_of_node()Daniel Mack1-1/+1
This obvious bug was introduced by d755910b7 ("pinctrl: move subsystem mutex to pinctrl_dev struct"). Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-30pinctrl: plgpio: add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han1-3/+3
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/pinctrl/spear/pinctrl-plgpio.c:645:12: warning: 'plgpio_suspend' defined but not used [-Wunused-function] drivers/pinctrl/spear/pinctrl-plgpio.c:684:12: warning: 'plgpio_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-26pinctrl: move subsystem mutex to pinctrl_dev structPatrice Chotard5-164/+176
This mutex avoids deadlock in case of use of multiple pin controllers. Before this modification, by using a global mutex, deadlock appeared when, for example, a call to pinctrl_pins_show() locked the pinctrl_mutex, called the ops->pin_dbg_show of a particular pin controller. If this pin controller needs I2C access to retrieve configuration information and I2C driver is using pinctrl to drive its pins, a call to pinctrl_select_state() try to lock again pinctrl_mutex which leads to a deadlock. Notice that the mutex grab from the two direction functions was moved into pinctrl_gpio_direction(). For several cases, we can't replace pinctrl_mutex by pctldev->mutex, because at this stage, pctldev is not accessible : - pinctrl_get()/pinctrl_put() - pinctrl_register_maps() So add respectively pinctrl_list_mutex and pinctrl_maps_mutex in order to protect pinctrl_list and pinctrl_maps list instead. Reintroduce pinctrldev_list_mutex in find_pinctrl_by_of_node(), pinctrl_find_and_add_gpio_range() pinctrl_request_gpio(), pinctrl_free_gpio(), pinctrl_gpio_direction(), pinctrl_devices_show(), pinctrl_register() and pinctrl_unregister() to protect pinctrldev_list. Changes v2->v3: - Fix a missing EXPORT_SYMBOL_GPL() for pinctrl_select_state(). Changes v1->v2: - pinctrl_select_state_locked() is removed, all lock mechanism is located inside pinctrl_select_state(). When parsing the state->setting list, take the per-pin-controller driver lock. (Patrice). - Introduce pinctrldev_list_mutex to protect pinctrldev_list in all functions which parse or modify pictrldev_list. (Patrice). - move find_pinctrl_by_of_node() from pinctrl/devicetree.c to pinctrl/core.c in order to protect pinctrldev_list. (Patrice). - Sink mutex:es into some functions and remove some _locked variants down to where the lists are actually accessed to make things simpler. (Linus) - Drop *all* mutexes completely from pinctrl_lookup_state() and pinctrl_select_state() - no relevant mutex was taken and it was unclear what this was protecting against. (Linus) Reported by : Seraphin Bonnaffe <seraphin.bonnaffe@stericsson.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-26pinctrl/pinconfig: fix misplaced gotoLaurent Meunier1-1/+1
This update contains a basic fix that went unseen through test and review. Signed-off-by: Laurent Meunier <laurent.meunier@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-23pinctrl: s3c64xx: Fix build error caused by undefined chained_irq_enterTomasz Figa1-2/+1
Commit de88cbb7 moved definitions of chained_irq_enter and chained_irq_exit to a generic header, which must be now included instead of the legacy arch-specific one. This patch fixes build error caused by including the legacy header leading to undefined chained_irq_enter and chained_irq_exit symbols. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-19pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register()Axel Lin1-1/+1
pinctrl_register() returns NULL on error. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Tony Prisk <linux@prisktech.co.nz> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-19pinctrl/pinconfig: add debug interfaceLaurent Meunier1-0/+232
This update adds a debugfs interface to modify a pin configuration for a given state in the pinctrl map. This allows to modify the configuration for a non-active state, typically sleep state. This configuration is not applied right away, but only when the state will be entered. This solution is mandated for us by HW validation: in order to test and verify several pin configurations during sleep without recompiling the software. Change log in this patch set; Take into account latest feedback from Stephen Warren: - stale comments update - improved code efficiency and readibility - limit size of global variable pinconf_dbg_conf - remove req_type as it can easily be added later when add/delete requests support is implemented Signed-off-by: Laurent Meunier <laurent.meunier@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-18pinctrl: abx500: fix issue when no pdataPatrice CHOTARD1-1/+0
Fix an issue when probing pinctrl-abx500 with no platform data. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-16Convert selectors of GENERIC_GPIO to GPIOLIBAlexandre Courbot1-13/+13
GENERIC_GPIO is now equivalent to GPIOLIB and features that depended on GENERIC_GPIO can now depend on GPIOLIB to allow removal of this option. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-11Merge tag 'renesas-pinmux-fixes-for-v3.10' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc2 From Simon Horman: Renesas ARM and SH based SoC pinmux fixes for v3.10 Correct a typo in sh-pfc r8a7779 * tag 'renesas-pinmux-fixes-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: sh-pfc: r8a7779: tidyup intc_irq3_b typo Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-09pinctrl: add pinctrl driver for imx6slShawn Guo2-0/+411
Add a pinctrl driver for i.MX6 SoloLite based on pinctrl-imx core driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09pinctrl: add pinctrl driver for imx6dlShawn Guo3-2/+500
The imx6dl is a derivative of imx6q with very limited difference. These two SoCs are so compatible that they can be handled as one platform in software. That said, we will not have target SOC_IMX6DL but just reusing SOC_IMX6Q. That's why the pinctrl-imx6dl driver is added here with symbol PINCTRL_IMX6Q controlling the build of it. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09pinctrl: imx: move hard-coding data into device treeShawn Guo6-5891/+1782
Currently, all imx pinctrl drivers maintain a big array of struct imx_pin_reg which hard-codes data like register offset and mux mode setting for each pin function. Every time a new imx SoC support is added, we need to add such a big mount of data. With moving to single kernel build, it's only matter of time to be blamed on memory consuming. With DTC pre-processor support in place, the patch moves all these data into device tree by redefining the PIN_FUNC_ID in imxXX-pinfunc.h and changing the PIN_FUNC_ID parsing code a little bit. The pin id gets re-numbered based on mux register offset, or config register offset if the pin has no mux register, so that kernel can identify the pin id from register offsets provided by device tree. As a bonus point of the change, those arbitrary magic numbers standing for particular PIN_FUNC_ID in device tree sources are now replaced by macros to improve the readability of dts files. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09Merge branch 'mxs/cleanup' into next/multiplatformArnd Bergmann6-5/+69
This is a dependency for mxs/multiplatform Signed-off-by: Arnd Bergmann <arnd@arndb.de> Conflicts: drivers/clocksource/Makefile
2013-04-09Merge tag 'v3.9-rc5' into next/cleanupArnd Bergmann6-5/+69
This is a dependency for the mxs/cleanup branch. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-09sh-pfc: r8a7779: tidyup intc_irq3_b typoKuninori Morimoto1-1/+1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2013-04-09pinctrl: sunxi: Rename wemac functions to emacMaxime Ripard1-18/+18
The pin functions associated to the ethernet controller were introduced with the label "wemac", which was the name of the ethernet driver in the allwinner source tree, while the real name of the IP is actually "emac", as advertised in several documents including the datasheet. Since this is part of the device tree bindings, and that these part of the bindings have not yet be released in a kernel version, it seems like the good timing to change it and assure consistency. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09pinctrl: exynos5440: add gpio interrupt supportThomas Abraham1-0/+142
Exynos5440 supports gpio interrupts on gpios 16 to 23. The eight interrupt lines originating from the pin-controller are connected to the gic. Add irq-chip support for these interrupts. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09pinctrl: exynos5440: fix probe failure due to missing pin-list in config nodesThomas Abraham1-3/+6
The property 'samsung,exynos5440-pins' is optional in configuration nodes which are included in the Exynos5440 pin-controller device node. Fix the incorrect failure in driver probe if 'samsung,exynos5440-pins' property is not found in the configuration nodes. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09pinctrl: ab8505: Staticize some symbolsSachin Kamat1-2/+3
Silences the following warnings: drivers/pinctrl/pinctrl-ab8505.c:274:28: warning: symbol 'ab8505_alternate_functions' was not declared. Should it be static? drivers/pinctrl/pinctrl-ab8505.c:351:32: warning: symbol 'ab8505_gpio_irq_cluster' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09pinctrl: ab8540: Staticize some symbolsSachin Kamat1-2/+3
Silences the following warnings: drivers/pinctrl/pinctrl-ab8540.c:302:28: warning: symbol 'ab8540_alternate_functions' was not declared. Should it be static? drivers/pinctrl/pinctrl-ab8540.c:379:32: warning: symbol 'ab8540_gpio_irq_cluster' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09pinctrl: ab9540: Staticize some symbolsSachin Kamat1-2/+3
Fixes the following warnings: drivers/pinctrl/pinctrl-ab9540.c:382:28: warning: symbol 'ab9540alternate_functions' was not declared. Should it be static? drivers/pinctrl/pinctrl-ab9540.c:457:32: warning: symbol 'ab9540_gpio_irq_cluster' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09pinctrl: ab8500: Staticize some symbolsSachin Kamat1-2/+3
These symbols are used only in this file. Silences the following warnings: drivers/pinctrl/pinctrl-ab8500.c:392:28: warning: symbol 'ab8500_alternate_functions' was not declared. Should it be static? drivers/pinctrl/pinctrl-ab8500.c:458:32: warning: symbol 'ab8500_gpio_irq_cluster' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-09pinctrl: abx500: Staticize some symbolsSachin Kamat1-5/+5
These symbols are used only in this file. Without this patch we get the following warnings: drivers/pinctrl/pinctrl-abx500.c:520:5: warning: symbol 'abx500_gpio_request' was not declared. Should it be static? drivers/pinctrl/pinctrl-abx500.c:527:6: warning: symbol 'abx500_gpio_free' was not declared. Should it be static? drivers/pinctrl/pinctrl-abx500.c:614:5: warning: symbol 'abx500_gpio_request_enable' was not declared. Should it be static? drivers/pinctrl/pinctrl-abx500.c:714:5: warning: symbol 'abx500_pin_config_get' was not declared. Should it be static? drivers/pinctrl/pinctrl-abx500.c:721:5: warning: symbol 'abx500_pin_config_set' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>