summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k/gpio.c
AgeCommit message (Collapse)AuthorFilesLines
2011-08-09ath9k: do not enable interrupt on set interrupt maskRajkumar Manoharan1-0/+2
At preset set_interrupt also enables interrupt after changing mask. This is not necessary in all cases and also sometime it breaks the assumption that interrupt was disabled. So let us enable the interrupt explicity if it was disabled earlier. This could also avoid unnecessary register ops and also helps the follow up patch to have global ref count for interrupts ops. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k: Drag the driver to the year 2011Sujith Manoharan1-1/+1
The Times They Are a-Changin'. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ath9k: Use ps wrappers for btcoex logic.Vivek Natarajan1-0/+4
Use ps wrappers before accessing hw registers in btcoex. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-28ath9k_hw: Move bt_stomp to hw from common.Vivek Natarajan1-4/+3
Move bt_stomp to ath9k_hw and add its support for latest chipsets. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k: Fix LED gpio for AR93xx chipsets.Senthil Balasubramanian1-0/+2
The LED gpio is incorrectly programmed for AR9300 and so the led is not working propelry. AR93xx uses gpio 10 for LED and not the default. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25ath9k: Fix bug in configuring hw timerVasanthakumar Thiagarajan1-3/+3
Hw next tigger time is configured as current_tsf + (timer_period * 10) which is wrong, it should be current_tsf + timer_period. The wrong hw timer configuration would cause btcoex related issues. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-30ath9k: add support for overriding LED pin and GPIO settings from platform dataFelix Fietkau1-6/+8
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-28ath9k: Fix incorrect GPIO LED pin for AR9485Senthil Balasubramanian1-0/+2
AR9485 doesn't use the default GPIO pin for LED and GPIO 6 is actually used for this. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-28ath9k: use generic mac80211 LED blinking codeFelix Fietkau1-141/+23
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-28ath9k: fold struct ath_wiphy into struct ath_softcFelix Fietkau1-2/+1
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-07ath: Convert ath_print to ath_dbgJoe Perches1-8/+8
Remove ath/debug.h and the includes of these files. Coalesce long formats. Correct a few misspellings and missing "\n"s from these logging messages. Remove unnecessary trailing space before a newline. Remove ARRAY_SIZE casts, use printf type %zu Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-07ath: Convert ath_print(.., ATH_DBG_FATAL to ath_errJoe Perches1-2/+2
So these errors are always emitted at KERN_ERR level. Remove ARRAY_SIZE casts, use printf type %zu Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09ath9k: remove a redundant call to ath9k_hw_gettsf32Felix Fietkau1-4/+2
When the timer_next argument to ath9k_gen_timer_start is behind the tsf value, tsf + timer_period is used, which is what ath_btcoex_period_timer was setting it to. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-11-09ath9k_hw: optimize interrupt mask changesFelix Fietkau1-2/+2
OProfile showed that ath9k was spending way too much time in ath9k_hw_set_interrupts. Since most of the interrupt mask changes only need to globally enable/disable interrupts, it makes sense to split this part into separate functions, replacing all calls to ath9k_hw_set_interrupts(ah, 0) with ath9k_hw_disable_interrupts(ah). ath9k_hw_set_interrupts(ah, ah->imask) only gets changed to ath9k_hw_enable_interrupts(ah), whenever ah->imask was not changed since the point where interrupts were disabled. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24ath9k_common: Move bt_stomp to common for sharing with ath9k_htc.Vivek Natarajan1-34/+6
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-23ath9k: Add a module parameter to disable led blinking.Vivek Natarajan1-3/+6
Some vendors require the LED to be ON always irrespective of any radio activity. Introducing a module parameter to disable blinking, so that one can choose between always on or led blink during activity. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-08wireless/ath: remove trailing space in messagesFrans Pop1-1/+1
Signed-off-by: Frans Pop <elendil@planet.nl> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-06ath9k: move imask from sc to ahPavel Roskin1-10/+5
Add ah variable in the functions that didn't have it and used sc->imask. Replace sc->sc_ah with ah in those functions. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-22ath9k: Fix wifi disconnection when collocated bt scan is activeVasanthakumar Thiagarajan1-8/+22
As all bt packets are priority traffic during bt scan, wifi will get disconnected when bt scan lasts for few seconds. Fix this by allocating 10% of bt period time (4.5ms) to wifi fully. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12ath9k: Add a new file for GPIOSujith1-0/+428
Move all LED/RFKILL/BTCOEX related code to gpio.c Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-02 18:17:13 +0000