summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath6kl/wmi.h
AgeCommit message (Collapse)AuthorFilesLines
2012-11-27ath6kl: Parse beacon interval from userspaceMohammed Shafi Shajakhan1-0/+6
Parse beacon interval from userspace to firmware. Incase the firmware does not supports it, just print a warning message and continue with AP settings. Cc: Sumathi Mandipati <sumathi@qca.qualcomm.com> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24ath6kl: Add support to detect fw error through heart beatVasanthakumar Thiagarajan1-0/+2
This patch adds support to detect fw error condition by sending periodic message (heart beat challenge) to firmware. Upon reception of the message, fw would send a response event to driver. When there are no reponses from fw for about 5 cmd driver would trigger the recovery logic assuming that fw has gone into an error state. Capable fw will advertise this capability through ATH6KL_FW_CAPABILITY_HEART_BEAT_POLL bit. This feature is disabled by default, can be enabled through a modparam (heart_beat_poll). This modparam also confiures the polling interval in msecs. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24ath6kl: fix link speed when using sgiDengke Qiu1-0/+3
The MSB of rate index from FW is used for sgi. But the ath6kl_wmi_get_rate doesn't handle it. The access to wmi_rate_tbl array may be out of range if sgi is 1. This may cause the return value of ath6kl_wmi_get_rate() function is incorrect link rate. We add sgi adjustment to avoid such case. kvalo: change patch title Signed-off-by: Dengke Qiu <dqiu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24ath6kl: consolidate WoW pattern lengthThomas Pedersen1-2/+1
Since WOW_MASK_SIZE and WOW_PATTERN_SIZE have the same value, are logically equivalent, and part of the WMI API so therefore unlikely to change, consolidate these into WOW_PATTERN_SIZE. Reported-by Kalle Valo <kvalo@qualcomm.com> Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24ath6kl: rework scheduled scanThomas Pedersen1-0/+10
This patch reflects changes in the firmware scheduled scan implementation to behave better in cases with multiple concurrent vifs. Major changes: - scheduled scan filters and state are now programmed per-vif. - decouple scheduled scan from host sleep. To maintain graceful failure with old firmwares, a new firmware capability bit is introduced: ATH6KL_FW_CAPABILITY_SCHED_SCAN_V2. ath6kl simply won't advertise scheduled scan to cfg80211 if the SCHED_SCAN_V2 is not supported. Since firmwares from here on out won't support the previous implicit API for scheduled scan (set WoW filters and host sleep), bump the firmware API to protect old drivers. Unfortunately, due to firmware RAM constraints ath6kl still cannot expect a scan complete event at the end of a scheduled scan results cycle, so the sched_scan_timer is retained. Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24ath6kl: fix incorrect use of IEEE80211_NUM_BANDSKalle Valo1-2/+2
ath6kl was incorrectly assuming that IEEE80211_NUM_BANDS will always be 2 and used that also in the firmware WMI interface definitions. But after the support for 60 GHz was added to cfg80211 IEEE80211_NUM_BANDS changed to 3 and this can cause all sort of problems, possibly even memory corruption. I only found this during code review and didn't notice any bugs, but I'm sure there are a few lurking somewhere. To fix this rename unused A_NUM_BANDS to ATH6KL_NUM_BANDS, which is always defined to be 2, and use that in WMI. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24ath6kl: add support for changing contry codeKalle Valo1-0/+6
To make it possible to change the country code from user space via nl80211 add handler for reg_notifier. The feature is only enabled when built time option CONFIG_ATH6KL_REGDOMAIN is enabled, which again depends on CFG80211_CERTIFICATION_ONUS for certication purposes. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24ath6kl: refactor wmi scan commandKalle Valo1-5/+0
ATH6KL_FW_CAPABILITY_STA_P2PDEV_DUPLEX was checked in cfg80211.c which is a bit awkward when adding more callsites to the scan functions. Refactor the code to wmi.c so that it's transparent to the callers. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24ath6kl: support TX error rate notificationThomas Pedersen1-0/+35
The ath6kl firmware can monitor a connection and report when a certain TX failure threshold is crossed. Support this configuration and event reporting on compatible firmwares. Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-10-24ath6kl: support rssi threshold for sched scanThomas Pedersen1-0/+10
The ath6kl firmware can filter scan results based on rssi. This is useful to limit hosts wakeups on scheduled scans. Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-06-11ath6kl: support changing dtim period on AP modeEtay Luz1-0/+5
This patch adds support for dtim_period configuration in beacon. kvalo: add a comment about ignoring the error, use vif_idx, add \n to the warning message Signed-off-by: Etay Luz <eluz@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-05-24ath6kl: Add support for setting tx rateset.Bala Shanmugam1-0/+32
Tx legacy and mcs rateset can configured using iw for 2.4 and 5 bands. Add support for the same in driver. kvalo: add an enum for the hw flags and rename the flag accordingly, rename ath6kl_cfg80211_set_bitrate_mask() to a shorter version to make it easier to indent Signed-off-by: Bala Shanmugam <bkamatch@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-05-16ath6kl: Include match ssid list in scheduled scanNaveen Singh1-0/+6
Scheduled scan implementation was only taking probed list into consideration. The matched list was dropped. This would cause FW not to report the AP as the list never had that AP's SSID populated. This was causing long connection time when supplicant would just issue a wild card SSID in probed list. As a part of this implementation, ath6kl driver would create a complete list by taking both probed and matched list and pass it to FW. FW would probe for the SSID that it needs to and would match against the relevant SSIDS that is been configured. kvalo: whitespace changes, less indentation in the for loop, use ++ Signed-off-by: Naveen Singh <navesing@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-05-16ath6kl: enable enhanced bmiss detectionThomas Pedersen1-0/+11
Enable enhanced bmiss detection if the firmware supports it. This feature is only enabled on some firmwares since it comes with a power cost. Also add a few missing command ids to keep the enums straight. kvalo: fix a compiler with ath6kl_err(), add few empty lines Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-05-11ath6kl: Use correct max-scan-SSIDs limitJouni Malinen1-2/+2
The currently used firmware images support 16 SSIDs in the scan request (indexes 0..15), so update the host driver to use the same limit to allow some more SSIDs to be scanned per request. In addition, change the max-index to max-SSIDs to make it easier to understand the implementation and fix couple of off-by-one checks that could limit the maximum number of entries too strictly. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-05-04ath6kl_sdio: Fix the EAPOL out of order issueVivek Natarajan1-0/+2
Send the EAPOL and management frames in the same AC_VO queue. The issue happens when the AP supports QOS, the management frames are sent to AC_VO queue and EAP frame goes to AC_BE queue. Even though the EAP frame is queued before the DEAUTH management frame, as they are queued on different h/w queues, order of delivery between these frames cannot be controlled. This fixes the connection failure seen in P2P case. Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-23ath6kl: support fw reporting phy capabilitiesThomas Pedersen1-0/+10
Currently the supported bands are just hard coded in the driver. However, the ath6kl FW will include its 11n and band capabilites in a WMI_READY event. Handle this and report capabilites to cfg80211 accordingly. Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-12ath6kl: handle concurrent AP-STA channel switchesThomas Pedersen1-0/+12
If an ath6kl AP vif is beaconing on one channel, and a STA vif associates on a different channel, a WMI_DISCONNECT event will be sent to the AP vif. Make the AP vif follow the STA interface, and notify userspace. kvalo: fix a sparse warning with vif->next_chan Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-09ath6kl: Fix 4-way handshake failure in AP and P2P GO modeVasanthakumar Thiagarajan1-0/+17
RSN capability field of RSN IE which is generated (which is what really advertised in beacon/probe response) differs from the one generated in wpa_supplicant. This inconsistency in rsn IE results in 4-way handshake failure. To fix this, configure rsn capability used in wpa_supplicant in firmware using a new wmi command, WMI_SET_IE_CMDID. There is a bit (ATH6KL_FW_CAPABILITY_RSN_CAP_OVERRIDE) in fw_capabilities to advertise this support to driver. Signed-off-by: Subramania Sharma <sharmat@qca.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-04-09ath6kl: Configure htcap in fw based on the channel type in AP modeVasanthakumar Thiagarajan1-0/+13
This patch disables HT in start_ap if the type of the channel on which the AP mode is going to be operating is non-HT. HT is enabled with default ht cap setting if the operating channel is going to be 11n. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-26ath6kl: add rx data padding supportKalle Valo1-0/+3
Needed when using USB. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-26ath6kl: Configure inactivity timeout in fwVasanthakumar Thiagarajan1-0/+7
Configure the inactivity timeout passed in start_ap() to firmware. This capability is advertised only when fw supports it, there is a new bit (ATH6KL_FW_CAPABILITY_INACTIVITY_TIMEOUT) in firmware capability ie for driver to learn fw's capability. After the fw finds out the station is inactive, it will probe the station with null func frames. By default, the timeout is 10 secs. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-07ath6kl: fix too long linesKalle Valo1-2/+2
Found by checkpatch: drivers/net/wireless/ath/ath6kl/init.c:78: WARNING: line over 80 characters drivers/net/wireless/ath/ath6kl/init.c:397: WARNING: line over 80 characters drivers/net/wireless/ath/ath6kl/init.c:407: WARNING: line over 80 characters drivers/net/wireless/ath/ath6kl/htc.c:189: WARNING: line over 80 characters drivers/net/wireless/ath/ath6kl/htc.c:704: WARNING: line over 80 characters drivers/net/wireless/ath/ath6kl/htc.c:2452: WARNING: line over 80 characters Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-07ath6kl: document all spinlocksKalle Valo1-0/+2
Also fixes quite a few checkpatch warnings like this: ath6kl/hif.h:226: CHECK: spinlock_t definition without comment Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-07ath6kl: Set optimal listen intvl,bmiss,scan params while going to wow suspendRaja Mani1-0/+8
* In order to save the target power in WOW suspend state, configure the best optimal values for the below parameters, - listen interval. - beacon miss interval. - scan parameters. Default values for above attributes are reverted in wow resume operation. * The default listen interval is set before the host issue connect request. * New function is added to configure beacon miss count. kvalo: minor changes to fix open parenthesis alignment Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-01ath6kl: implement hidden ssidThomas Pedersen1-0/+5
The ath6kl FW does not distinguish between different types of hidden SSIDs (empty or null), so treat all cfg80211 requests for hidden ssid the same. Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-02-27ath6kl: Add unicast mgmt frame bufferingNaveen Gangadharan1-3/+0
PS buffering of unicast Action frames that are sent in a context of a BSS. In AP mode when the recepient station goes to powersave and PS_POLL flag is not set, we would buffer the frames. Send out unicast mgmt bufferred frame when PS_POLL is received. This fixes a bug in P2P GO behavior when sending a GO Discoverability Request to a client that is in sleep mode. kvalo: indentation fixes Signed-off-by: Thirumalai Pachamuthu <tpachamu@qca.qualcomm.com> Signed-off-by: Naveen Gangadharan <ngangadh@qca.qualcomm.com> Signed-off-by: Aarthi Thiruvengadam <athiruve@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-02-08ath6kl: Update license headerVasanthakumar Thiagarajan1-0/+1
Update license header with the copyright to Qualcomm Atheros, Inc. for the year 2011-2012. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-01-30ath6kl: Wait for host sleep mode cmd processed event during WOW suspendRaja Mani1-0/+2
For every WMI_SET_HOST_SLEEP_MODE_CMDID command (send from the host), the firmware sends WMI_SET_HOST_SLEEP_MODE_CMD_PROCESSED_EVENTID as an acknowledgement to the host. In order to being sync with the firmware, the host has to wait for WMI_SET_HOST_SLEEP_MODE_CMD_PROCESSED_EVENT event before going to the suspend state. This patch ensures ath6kl_wow_suspend() waits until it gets this event after sending set host sleep mode command. This patch adds, * New command WMI_SET_HOST_SLEEP_MODE_CMD_PROCESSED_EVENTID in WMI event table. * New WMI function ath6kl_wmi_host_sleep_mode_cmd_prcd_evt_rx() to process the event. * New flag HOST_SLEEP_MODE_CMD_PROCESSED in VIF flags to record the arrival of the event. Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-01-30ath6kl: Configure WOW patterns while going to wow_suspendRaja Mani1-1/+2
First preference is given to the user configured WOW patterns. If the user doesn't configure any patterns (for ex, via iw command), the default patterns will be configured based on the current mode (vif->nw_type) while going to WOW suspend. Summary of changes: * ath6kl_wow_ap() is added to configure the below default patterns when the system enters into WOW suspend in AP mode. + Unicast IP, EAPOL-like and ARP packet pattern + ARP packet pattern + mDNS/SSDP/LLMNR pattern + DHCP broadcast pattern * ath6kl_wow_sta() is added to configure the below default patterns when the system enters into WOW suspend in STA mode. + Unicast packet pattern + mDNS/SSDP/LLMNR pattern * Move the user provided WOW patterns configuration code from ath6kl_wow_suspend() to a separate function called ath6kl_wow_usr(). * Two argument variable's ('filter' and 'mask) data type in ath6kl_wmi_add_wow_pattern_cmd() are changed from 'u8 *' to 'const u8 *'. This is needed to make all pattern and mask arrays to be 'static const u8' in the caller function. * New conditional check is added to make sure user configured pattern count is within the limit (WOW_MAX_FILTERS_PER_LIST). Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-01-13ath6kl: Add support for uAPSDThirumalai Pachamuthu1-4/+37
* A new APSD power save queue is added in the station structure. * When a station has APSD capability and goes to power save, the frame designated to the station will be buffered in APSD queue. * When the host receives a frame which the firmware marked as trigger, host delivers the buffered frame from the APSD power save queue. Number of frames to deliver is decided by MAX SP length. * When a station moves from sleep to awake state, all frames buffered in APSD power save queue are sent to the firmware. * When a station is disconnected, all frames bufferes in APSD power save queue are dropped. * When the host queues the first frame to the APSD queue or removes the last frame from the APSD queue, it is indicated to the firmware using WMI_AP_APSD_BUFFERED_TRAFFIC_CMD. kvalo: fix buggy handling of sks queues, made it more obvious the user priority when wmm is disabled, remove unneed else block and combined some variable declarations Signed-off-by: Thirumalai Pachamuthu <tpachamu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-01-09ath6kl: Add a function in wmi.c to add/delete a multicast filterVasanthakumar Thiagarajan1-0/+7
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
2012-01-09ath6kl: Add a function in wmi to send WMI_MCAST_FILTER_CMDIDVasanthakumar Thiagarajan1-0/+5
This will be used to disable/enable multicast receive. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
2012-01-02ath6kl: Remove redundant key_index check.Vivek Natarajan1-1/+0
Less-than-zero comparison of an unsigned value is never true. kvalo: remove WMI_MIN_KEY_INDEX altogether, it's useless Signed-off-by: Vivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-01-02ath6kl: Support for TCP checksum offload to firmwareRishi Panjwani1-0/+3
The change enables offloading TCP checksum calculation to firmware. There are still some issues with the checksum offload so better to disable it by default until the issues are resolved. To enable TCP checksum offload for tx and rx paths, use the ethtool as follows: ethtool -K <interface> tx on ethtool -K <interface> rx on To disable TCP checksum offload, for tx and rx paths, use the ethtool as follows: ethtool -K <interface> tx off ethtool -K <interface> rx off kvalo: indentation changes Signed-off-by: Rishi Panjwani <rpanjwan@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-12-23ath6kl: Avoid taking struct as argument in ath6kl_wmi_set_ip_cmdRaja Mani1-2/+3
In this way, caller is free to pass only the value of IP addr to configure. In addition to this, * 'ips' variable data type in struct wmi_set_ip_cmd is changed from __le32 to __be32 in order to match network byte order. * ipv4_is_multicast() is used to validate multicast ip addr. * New argument if_idx is added to supply correct vif index to ath6kl_wmi_cmd_send(). This will be used in the next patch. Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Thirumalai Pachamuthu <tpachamu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-12-14ath6kl: support for P2P mgmt operations on station interfaceAarthi Thiruvengadam1-1/+126
This patch enables support for doing P2P management operations like device discovery on top of a station interface. After group formation, the station interface will become a P2P GO/client interface as the case may be. This feature requires modifications to a couple of existing WMI structures and therefore new command ids and structures have been defined in order to be compatible with older firmware versions and other chips. The exception here is the wmi_connect_cmd. Adding a new field to the end of the structure will not cause any issues with previous firmware versions since firmware only checks for minimum length of the command. The other structures are of variable length, hence it was not possible to add new fields to the end. The new command ids have to be added to the end of enum wmi_cmd_id, so it has updated to match the firmware. The driver will support both the 'old' and the 'new' commands for a while by checking the firmware capabilities. Signed-off-by: Aarthi Thiruvengadam <athiruve@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-12-13ath6kl: implement scheduled scanKalle Valo1-0/+2
ath6kl firmware supports scheduled scan functionality with the wow ssid filter. But the firmware does not send any events after scan results so I had to add a timer which notifies about new scan results. Sched scan needs firmware version 3.2.0.6 or later. If firmware doesn't support sched scan the driver will not enable the feature. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-12-13ath6kl: fix value of WOW_FILTER_SSIDKalle Valo1-1/+1
According to the firmware engineers WOW_FILTER_SSID is actually the second bit, not the first. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-24ath6kl: Increase the maximum number of connections in AP modeVasanthakumar Thiagarajan1-1/+1
The maximum number of clients which ath6kl can support in AP mode is 10. The limitation of 8 connections is only for older chipsets which ath6kl does not support. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-24ath6kl: remove unused sc_params from struct ath6klKalle Valo1-10/+0
It was only initialised but not used anywhere. Also remove two defines which ended up unused after this change. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-11ath6kl: Remove few unused WMI stuffRaja Mani1-14/+0
* Removed unused WOW_MAX_FILTER_LISTS macro. * Removed empty ath6kl_wmi_get_wow_list_event_rx() function. List of configured WOW patterns are maintained in CFG layer itself. No need to have this function in ath6kl to get configured WOW pattern list. It can added later if we need it for debugging. Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-11ath6kl: Add wmi functions to configure WOW mode and host sleep modeRaja Mani1-0/+41
It will be used in WOW suspend/resume functions to active/deactivate WOW suspend mode. Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-11ath6kl: Add wmi functions to add/delete WOW patternsRaja Mani1-0/+17
These commands will be used in WOW suspend/resume functions to configure WOW parameters like patterns to be matched and it's mask value, etc. Signed-off-by: Raja Mani <rmani@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-11ath6kl: Fix key configuration to copy at most seq_len from seqJouni Malinen1-1/+2
There is no guarantee on the caller using 8-octet buffer for key->seq, so better follow the key->seq_len parameter on figuring out how many octets to copy. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-11ath6kl: Remove unused WMI crypto definesJouni Malinen1-3/+0
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-11ath6kl: add aborted parameter to ath6kl_cfg80211_scan_complete_event()Kalle Valo1-0/+4
Currently it takes an error code as status, but what we really want to tell is if the scan was aborted or not. Also fix a bug where we were comparing firmware scan status values with kernel error codes, which is obviously wrong. This meant that ath6kl didn't detect when firmware informed about failed scans. I doubt that this fix doesn't make any difference in practise but it still needs to be fixed. This is fixed by adding an enum for the success status code and checking for that. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-11ath6kl: rename ath6kl_wmi_qos_state_init() to _wmi_reset()Kalle Valo1-0/+1
Just to make it more clear that this function is supposed to reset wmi related variables. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-11ath6kl: add support for WPSAarthi Thiruvengadam1-0/+1
Add control flag CONNECT_WPS_FLAG if a WPS IE is present in the Association Request IEs. This flag is needed when the station must connect to a WPS-enabled AP. Signed-off-by: Aarthi Thiruvengadam <athiruve@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-11ath6kl: Initialize target wlan values for every vifVasanthakumar Thiagarajan1-8/+10
Wlan parameters need to be configured for every vif in target. Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-17 13:53:54 +0000