summaryrefslogtreecommitdiff
path: root/drivers/net/r8169.c
AgeCommit message (Collapse)AuthorFilesLines
2011-07-19r8169: fix sticky accepts packet bits in RxConfig.Francois Romieu1-5/+3
e542a2269f232d61270ceddd42b73a4348dee2bb (r8169: adjust the RxConfig settings) broke the return from promiscuous mode to physical address match mode. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Signed-off-by: Hayes Wang <hayeswang@realtek.com>
2011-07-14r8169: adjust the RxConfig settings.Hayes Wang1-12/+44
Set the init value before reset in probe function. And then just modify the relative bits and keep the init settings. For 8110S, 8110SB, and 8110SC series, the initial value of RxConfig needs to be set after the tx/rx is enabled. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2011-07-14r8169: don't enable rx when shutdown.Hayes Wang1-2/+5
Only 8111b needs to enable rx when shutdowning with WoL. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2011-07-14r8169: fix wake on lan setting for non-8111E.Hayes Wang1-2/+4
Only 8111E needs enable RxConfig bit 0 ~ 3 when suspending or shutdowning for wake on lan. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2011-07-14r8169: support RTL8111E-VL.Hayes Wang1-7/+179
Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2011-07-14r8169: add ERI functions.Hayes Wang1-0/+43
Add the ERI functions which would be used by the new chips. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2011-07-14r8169: modify the flow of the hw reset.Hayes Wang1-25/+28
- Disable tx and rx by resetting hw, so replace rtl8169_asic_down with rtl8169_hw_reset. - RxConfig bits 0 ~ 5 have to be cleared before hw reset to avoid receiving spurious data. - Certain chips need to do some checking before reset. - Remove hw reset which is done before hw_start. It is done in close, down or device probe functions. - Move rtl8169_init_ring_indexes function into rtl_hw_reset function. The indexes of tx and rx only need to be zero when the hw resets. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2011-07-14r8169: adjust some registers.Hayes Wang1-16/+27
Define new registers and modify some existing ones. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2011-07-05Merge branch 'master' of ↵David S. Miller1-1/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-06-27r8169: remove unnecessary read of PCI_CAP_ID_EXPJon Mason1-14/+6
The PCIE capability offset is saved during PCI bus walking. Use the value from pci_dev instead of checking in the driver and saving it off the the driver specific structure. Also, it will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-24r8169: fix wrong register use.Francois Romieu1-1/+1
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
2011-06-20Merge branch 'master' of ↵David S. Miller1-4/+6
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-agn-rxon.c drivers/net/wireless/rtlwifi/pci.c net/netfilter/ipvs/ip_vs_core.c
2011-06-18r8169: check firmware content sooner.Francois Romieu1-19/+44
Firmware checking is only performed when the firmware is loaded instead of each time the driver inits the phy. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2011-06-18r8169: support new firmware format.Hayes Wang1-1/+35
The new firmware format adds versioning as firmware for a specific chipset appears to be subject to change. Current "legacy" format is still supported. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2011-06-18r8169: explicit firmware format check.Francois Romieu1-13/+49
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2011-06-18r8169: move the firmware down into the device private data.Francois Romieu1-26/+48
No functional difference. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2011-06-17r8169: fix static initializers.Francois Romieu1-4/+6
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2011-06-06net: remove interrupt.h inclusion from netdevice.hAlexey Dobriyan1-0/+1
* remove interrupt.g inclusion from netdevice.h -- not needed * fixup fallout, add interrupt.h and hardirq.h back where needed. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-22Add appropriate <linux/prefetch.h> include for prefetch usersPaul Gortmaker1-0/+1
After discovering that wide use of prefetch on modern CPUs could be a net loss instead of a win, net drivers which were relying on the implicit inclusion of prefetch.h via the list headers showed up in the resulting cleanup fallout. Give them an explicit include via the following $0.02 script. ========================================= #!/bin/bash MANUAL="" for i in `git grep -l 'prefetch(.*)' .` ; do grep -q '<linux/prefetch.h>' $i if [ $? = 0 ] ; then continue fi ( echo '?^#include <linux/?a' echo '#include <linux/prefetch.h>' echo . echo w echo q ) | ed -s $i > /dev/null 2>&1 if [ $? != 0 ]; then echo $i needs manual fixup MANUAL="$i $MANUAL" fi done echo ------------------- 8\<---------------------- echo vi $MANUAL ========================================= Signed-off-by: Paul <paul.gortmaker@windriver.com> [ Fixed up some incorrect #include placements, and added some non-network drivers and the fib_trie.c case - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-09r8169: avoid late chip identifier initialisation.Francois Romieu1-9/+9
Unknown 8168 chips did not have any PLL power method set as they did not inherit a default family soon enough. Fix it. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
2011-05-09r8169: merge firmware information into the chipset description data.Francois Romieu1-104/+110
- RTL_GIGA_MAC_NONE is a fake index so put it at the end of the enumeration and shift everybody. - RTL_GIGA_MAC_VER_17 / RTL_GIGA_MAC_VER_16 ordering fixed. Though not wrong it was confusing enough to wonder if things were right. Renaming rtl_chip_info was not strictly necessary. It allows to check the patch for the correct use of the indexes though. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
2011-05-09r8169: provide some firmware information via ethtool.Francois Romieu1-20/+25
There is no real firmware version yet but the manpage of ethtool is rather terse about the driver information. Former output: $ ethtool -i eth1 driver: r8169 version: 2.3LK-NAPI firmware-version: bus-info: 0000:01:00.0 $ ethtool -i eth0 driver: r8169 version: 2.3LK-NAPI firmware-version: bus-info: 0000:03:00.0 Current output: $ ethtool -i eth1 driver: r8169 version: 2.3LK-NAPI firmware-version: N/A bus-info: 0000:01:00.0 $ ethtool -i eth0 driver: r8169 version: 2.3LK-NAPI firmware-version: rtl_nic/rtl8168d-1.fw bus-info: 0000:03:00.0 Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Fixed-by Ciprian Docan <docan@eden.rutgers.edu> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Cc: Fejes József <fejes@joco.name> Cc: Borislav Petkov <borislav.petkov@amd.com>
2011-05-09r8169: remove non-NAPI context invocation of rtl8169_rx_interrupt.Francois Romieu1-23/+9
Invocation of rtl8169_rx_interrupt from rtl8169_reset_task was originally intended to retrieve as much packets as possible from the rx ring when a reset was needed. Nowadays rtl8169_reset_task is only scheduled, with some delay a. from the tx timeout watchdog b. when resuming c. from rtl8169_rx_interrupt itself It's dubious that the loss of outdated packets will matter much for a) and b). c) does not need to call itself again. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
2011-05-09r8169: link speed selection timer rework.Francois Romieu1-35/+9
The implementation was a bit krusty. The 10s rtl8169_phy_timer timer has been (was ?) required with older 8169 for adequate phy operation when full gigabit is advertised in autonegotiated mode. The timer does nothing if the link is up. Otherwise it keeps resetting the phy until things improve. - the device private data field phy_1000_ctrl_reg was used to schedule the timer. Avoid it and save a few bytes. - rtl8169_set_settings pending timer is disabled before changing the link settings as rtl8169_phy_timer is not always needed (see the removed test in rtl8169_phy_timer). - rtl8169_set_speed the requested link parameters may not match the chipset : bail out early on failure. - rtl8169_open Calling rtl8169_request_timer is redundant with -> rtl8169_open -> rtl8169_init_phy -> rtl8169_set_speed -> mod_timer The latter always enables the phy timer whereas the former did not for RTL_GIGA_MAC_VER_01. It should not make things worse but only time will tell if reality agrees. - rtl8169_request_timer : unused yet. Removed. - rtl8169_delete_timer : useless. Bloat. Removed. Side effect : the timer may kick in if the TBI is enabled. I do not know if the TBI has ever been used in real life. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
2011-05-09r8169: rtl8169_set_speed_xmii cleanup.Francois Romieu1-10/+1
Shorten chipset version test. No functional change. Careful readers will notice that the 'supports_gmii' flag is deduced from the device PCI id. Though less specific than the chipset related RTL_GIGA_MAC_VER_XY, it is good enough to detect a GMII deprieved 810x. Some features push for a device specific configuration (improved jumbo frame support for instance). 'supports_gmii' will follow this path if / when the device PCI id test stops working. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
2011-05-09r8169: remove some code duplication.Francois Romieu1-23/+19
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
2011-05-09r8169: style cleanups.Francois Romieu1-108/+98
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
2011-04-29ethtool: cosmetic: Use ethtool ethtool_cmd_speed APIDavid Decotigny1-1/+1
This updates the network drivers so that they don't access the ethtool_cmd::speed field directly, but use ethtool_cmd_speed() instead. For most of the drivers, these changes are purely cosmetic and don't fix any problem, such as for those 1GbE/10GbE drivers that indirectly call their own ethtool get_settings()/mii_ethtool_gset(). The changes are meant to enforce code consistency and provide robustness with future larger throughputs, at the expense of a few CPU cycles for each ethtool operation. All drivers compiled with make allyesconfig ion x86_64 have been updated. Tested: make allyesconfig on x86_64 + e1000e/bnx2x work Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29ethtool: Use full 32 bit speed range in ethtool's set_settingsDavid Decotigny1-1/+2
This makes sure the ethtool's set_settings() callback of network drivers don't ignore the 16 most significant bits when ethtool calls their set_settings(). All drivers compiled with make allyesconfig on x86_64 have been updated. Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-27r8169: fix merge conflict fix.Francois Romieu1-20/+5
- use adequate MAC_VER id (see 01dc7fec4025f6bb72b6b98ec88b375346b6dbbb) - remove duplicate rtl_firmware_info record - remove duplicate functions Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-26Merge branch 'master' of ↵David S. Miller1-32/+76
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Resolved logic conflicts causing a build failure due to drivers/net/r8169.c changes using a patch from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-24r8169: don't request firmware when there's no userspace.François Romieu1-28/+71
The firmware is cached during the first successfull call to open() and released once the network device is unregistered. The driver uses the cached firmware between open() and unregister_netdev(). So far the firmware is optional : a failure to load the firmware does not prevent open() to success. It is thus necessary to 1) unregister all 816x / 810[23] devices and 2) force a driver probe to issue a new firmware load. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Fixed-by: Ciprian Docan <docan@eden.rutgers.edu> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
2011-04-18r8169: TSO fixes.Francois Romieu1-72/+137
- the MSS value is actually contained in a 11 bits wide (0x7ff) field. The extra bit in the former MSSMask did encompass the TSO command bit ("LargeSend") as well (0xfff). Oops. - the Tx descriptor layout is not the same through the whole chipset family. The 8169 documentation, the 8168c documentation and Realtek's drivers (8.020.00, 1.019.00, 6.014.00) highlight two layouts: 1. 8169, 8168 up to 8168b (included) and 8101 2. {8102e, 8168c} and beyond - notwithstanding the "first descriptor" and "last descriptor" bits, the same Tx descriptor content is enforced when a packet consists of several descriptors. The chipsets are documented to require it. Credits go to David Dillow <dave@thedillows.org> for the original patch. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Realtek <nic_swsd@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-10net: r8169: convert to hw_featuresMichał Mirosław1-62/+33
Simple conversion with a bit of needed cleanup. This also fixes: - confusion around vlan_features in rtl8169_vlan_mode(), - problem with broken TSO for too big MTU (the limit is set at 0xFFF --- max MSS field value). SG+IP_CSUM+TSO is left disabled by default, based on suggestion by David Dillow. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30net/r8169: support RTL8168Ehayeswang1-5/+207
Support RTL8168E/RTL8111E. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30net/r8169: add a new chip for RTL8168DPhayeswang1-22/+76
Add a new chip for RTL8168DP. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-30net/r8169: add a new chip for RTL8105hayeswang1-0/+1
Add a new chip for RTL8105 whose settings are the same with RTL_GIGA_MAC_VER_30. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-20r8169: fix a bug in rtl8169_init_phy()Eric Dumazet1-2/+2
commit 54405cde7624 (r8169: support control of advertising.) introduced a bug in rtl8169_init_phy() Reported-and-tested-by: Piotr Hosowicz <piotr@hosowicz.com> Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by:: Oliver Neukum <oliver@neukum.org> Cc: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Anca Emanuel <anca.emanuel@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-07Merge branch 'davem-next.r8169' of ↵David S. Miller1-94/+178
git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6
2011-03-05r8169: convert to new VLAN model.Francois Romieu1-61/+49
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Reviewed-by: Jesse Gross <jesse@nicira.com>
2011-03-05r8169: support control of advertising.Oliver Neukum1-17/+37
This allows "ethtool advertise" to control the speed and duplex features the device offers the switch. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2011-03-05r8169: support the new chips for RTL8105E.Hayes Wang1-2/+90
Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2011-03-03r8169: disable ASPMStanislaw Gruszka1-0/+6
For some time is known that ASPM is causing troubles on r8169, i.e. make device randomly stop working without any errors in dmesg. Currently Tomi Leppikangas reports that system with r8169 device hangs with MCE errors when ASPM is enabled: https://bugzilla.redhat.com/show_bug.cgi?id=642861#c4 Lets disable ASPM for r8169 devices at all, to avoid problems with r8169 PCIe devices at least for some users. Reported-by: Tomi Leppikangas <tomi.leppikangas@gmail.com> Cc: stable@kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-01r8169: adjust rtl8169_set_speed_xmii function.Hayes Wang1-14/+2
- adjust code of rtl8169_set_speed_xmii function - remove parts of code which are done in rtl_pll_power_up function (8168 only) Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2011-02-23r8169: fix RTL8168DP power off issue.Hayes Wang1-3/+14
- fix the RTL8111DP turn off the power when DASH is enabled. - RTL_GIGA_MAC_VER_27 must wait for tx finish before reset. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2011-02-23r8169: correct settings of rtl8102e.Hayes Wang1-14/+6
Adjust and remove certain settings of RTL8102E which are for previous chips. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-off-by: Francois Romieu <romieu@fr.zoreil.com>
2011-02-23r8169: fix incorrect args to oob notify.Hayes Wang1-2/+3
It results in the wrong point address and influences RTL8168DP. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com>
2011-02-17drivers/net: Call netif_carrier_off at the end of the probeIvan Vecera1-0/+2
Without calling of netif_carrier_off at the end of the probe the operstate is unknown when the device is initially opened. By default the carrier is on so when the device is opened and netif_carrier_on is called the link watch event is not fired and operstate remains zero (unknown). This patch fixes this behavior in forcedeth and r8169. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-04r8169: prevent RxFIFO induced loops in the irq handler.Francois Romieu1-0/+9
While the RxFIFO interruption is masked for most 8168, nothing prevents it to appear in the irq status word. This is no excuse to crash. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Ivan Vecera <ivecera@redhat.com> Cc: Hayes <hayeswang@realtek.com>
2011-02-04r8169: RxFIFO overflow oddities with 8168 chipsets.Francois Romieu1-9/+21
Some experiment-based action to prevent my 8168 chipsets locking-up hard in the irq handler under load (pktgen ~1Mpps). Apparently a reset is not always mandatory (is it at all ?). - RTL_GIGA_MAC_VER_12 - RTL_GIGA_MAC_VER_25 Missed ~55% packets. Note: - this is an old SiS 965L motherboard - the 8168 chipset emits (lots of) control frames towards the sender - RTL_GIGA_MAC_VER_26 The chipset does not go into a frenzy of mac control pause when it crashes yet but it can still be crashed. It needs more work. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Ivan Vecera <ivecera@redhat.com> Cc: Hayes <hayeswang@realtek.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-18 01:02:54 +0000