summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)AuthorFilesLines
2011-03-31Fix common misspellingsLucas De Marchi9-14/+14
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-29Merge branch 'for-linus' of ↵Linus Torvalds19-1293/+1664
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (26 commits) mmc: SDHI should depend on SUPERH || ARCH_SHMOBILE mmc: tmio_mmc: Move some defines into a shared header mmc: tmio: support aggressive clock gating mmc: tmio: fix power-mode interpretation mmc: tmio: remove work-around for unmasked SDIO interrupts sh: fix SDHI IO address-range ARM: mach-shmobile: fix SDHI IO address-range mmc: tmio: only access registers above 0xff, if available mfd: remove now redundant sh_mobile_sdhi.h header sh: convert boards to use linux/mmc/sh_mobile_sdhi.h ARM: mach-shmobile: convert boards to use linux/mmc/sh_mobile_sdhi.h mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver sh: ecovec: use the CONFIG_MMC_TMIO symbols instead of MFD mmc: tmio: split core functionality, DMA and MFD glue mmc: tmio: use PIO for short transfers mmc: tmio-mmc: Improve DMA stability on sh-mobile mmc: fix mmc_app_send_scr() for dma transfer mmc: sdhci-esdhc: enable esdhc on imx53 mmc: sdhci-esdhc: use writel/readl as general APIs mmc: sdhci: add the abort CMDTYPE bits definition ...
2011-03-29drivers: Final irq namespace conversionThomas Gleixner1-1/+1
Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-28mmc: SDHI should depend on SUPERH || ARCH_SHMOBILEGuennadi Liakhovetski1-0/+1
Fix build breakage on platforms, not providing readsw and writesw functions, e.g., on x86(_64). Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-26mmc: tmio_mmc: Move some defines into a shared headerSimon Horman3-46/+6
Also add TMIO_BBS. This allows these defines to also be used by zboot. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: tmio: support aggressive clock gatingGuennadi Liakhovetski1-9/+8
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: tmio: fix power-mode interpretationGuennadi Liakhovetski1-5/+5
The power-mode sequence on MMC is MMC_POWER_OFF -> MMC_POWER_UP -> MMC_POWER_ON and not MMC_POWER_ON -> MMC_POWER_UP, as the driver currently is implying. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: tmio: remove work-around for unmasked SDIO interruptsGuennadi Liakhovetski1-21/+2
SDIO IRQs got unmasked on sh-mobile while writing to the CTL_CLK_AND_WAIT_CTL register, because that register at address 0x138 is not implemented on those SoCs and writes to it overwrite the register at address 0x38: CTL_SDIO_IRQ_MASK. Previous patches eliminated access to register above 0xff on sh-mobile, so that this work-around isn't needed anymore. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: tmio: only access registers above 0xff, if availableGuennadi Liakhovetski1-6/+19
Not all tmio implementations have registers above oxff. Accessing them on thise platforms is dangerous. In some cases it leads to address wrapping to addresses below 0x100, which corrupts random unrelated registers. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: tmio: convert the SDHI MMC driver from MFD to a platform driverGuennadi Liakhovetski4-4/+185
On sh-mobile platforms the SDHI driver was using the tmio_mmc SD/SDIO MFD cell driver. Now that the tmio_mmc driver has been split into a core and a separate MFD glue, we can support SDHI natively without the need to emulate an MFD controller. This also allows to support systems with an on-SoC SDHI controller and a separate MFD with a TMIO core. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: tmio: split core functionality, DMA and MFD glueGuennadi Liakhovetski6-1285/+1409
TMIO MMC chips contain an SD / SDIO IP core from Panasonic, similar to the one, used in MN5774 and other MN57xx controllers. These IP cores are included in many multifunction devices, in sh-mobile chips from Renesas, in the latter case they can also use DMA. Some sh-mobile implementations also have some other specialities, that MFD-based solutions don't have. This makes supporting all these features in a monolithic driver inconveniet and error-prone. This patch splits the driver into 3 parts: the core, the MFD glue and the DMA support. In case of a modular build, two modules will be built: mmc_tmio_core and mmc_tmio. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: tmio: use PIO for short transfersGuennadi Liakhovetski1-10/+23
This patch allows transferring of some requests in PIO and some in DMA mode and defaults to using DMA only for transfers longer than 8 bytes. This is especially useful with SDIO, which can have lots of 2- and 4-byte transfers, creating unnecessary high overhead, when executed in DMA. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: tmio-mmc: Improve DMA stability on sh-mobileGuennadi Liakhovetski1-29/+34
On some SDHI tmio implementations the order of DMA and command completion interrupts swaps, which leads to malfunction. This patch postpones DMA activation until the MMC command completion IRQ time. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: fix mmc_app_send_scr() for dma transferYoshihiro Shimoda1-1/+13
This patch is based on the commit "af51715079e7fb6b290e1881d63d815dc4de5011": * Bugfix to that mmc_send_cxd_data() code: dma-to-stack is unsafe/nonportable, so kmalloc a bounce buffer instead. The driver may invalidate the mmc_card->csd when host driver uses dma. So this subroutine also needs a kmalloc buffer. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: sdhci-esdhc: enable esdhc on imx53Richard Zhu1-0/+42
Fix the NO INT in the Multi-BLK IO in SD/MMC, and Multi-BLK read in SDIO on imx53. The CMDTYPE of the CMD register (offset 0xE) should be set to "11" when the STOP CMD12 is issued on imx53 to abort one open ended multi-blk IO. Otherwise the TC INT wouldn't be generated. In exact block transfer, the controller doesn't complete the operations automatically as required at the end of the transfer and remains on hold if the abort command is not sent on imx53. As a result, the TC flag is not asserted and SW receives timeout exception. Set bit1 of Vendor Spec register to fix it. Signed-off-by: Richard Zhu <Hong-Xing.Zhu@freescale.com> Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: sdhci-esdhc: use writel/readl as general APIsRichard Zhu2-8/+38
Add one flag to indicate the GPIO CD/WP is enabled or not on imx platforms, and reuse the writel/readl as the general APIs for imx SOCs. Signed-off-by: Richard Zhu <Hong-Xing.Zhu@freescale.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: sdhci: add the abort CMDTYPE bits definitionRichard Zhu1-0/+1
Add the abort CMDTYPE bits definition of command register (offset 0xE) Signed-off-by: Richard Zhu <Hong-Xing.Zhu@freescale.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: sdhci-esdhc: remove SDHCI_QUIRK_NO_CARD_NO_RESET from esdhcRichard Zhu2-3/+3
sdhci-esdhc-imx does not need SDHCI_QUIRK_NO_CARD_NO_RESET. Make it OF-specific. Signed-off-by: Richard Zhu <Hong-Xing.Zhu@freescale.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: of_mmc_spi: Need to include irq.h and of_irq.hDavid Miller1-0/+2
Since these are the headers that provide irq_of_parse_and_map() and NO_IRQ. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: mmci: Add ARM variant with extended FIFOPawel Moll1-1/+12
New IO FPGA implementation for Versatile Express boards contain MMCI (PL180) cell with FIFO extended to 128 words (512 bytes). Matt Waddel reports that this patch improves MMC performance on his vexpress system, and also fixes "mmcblk0: error -5 transferring data" errors. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Tested-by: Matt Waddel <matt.waddel@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: dw_mmc: set fixed burst in BMOD registerJaehoon Chung1-2/+2
This patch uses the fixed burst bit when using an internal DMA controller. I found increased performance with IDMAC when this bit is set. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: use pci_dev->revisionSergei Shtylyov2-7/+4
The SDHCI driver uses PCI_CLASS_REVISION instead of PCI_REVISION_ID, so it was not converted by commit 44c10138fd4bbc4b6d6bff0873c24902f2a9da65 (PCI: Change all drivers to use pci_device->revision). The newer VIA driver has similar code too. This patch converts both drivers to use the 'revision' field of 'struct pci_dev'. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by: Harald Welte <HaraldWelte@viatech.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-25mmc: mmc_test: Remove set-but-unused variable.Chris Ball1-2/+1
Fixes: drivers/mmc/card/mmc_test.c: In function ‘mmc_test_seq_perf’: drivers/mmc/card/mmc_test.c:1878:28: warning: variable ‘ts’ set but not used [-Wunused-but-set-variable] There's no reason to be calling timespec_sub() here, because mmc_test_print_avg_rate() is going to do that itself. Signed-off-by: Chris Ball <cjb@laptop.org> Cc: Adrian Hunter <adrian.hunter@nokia.com>
2011-03-24Merge branch 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds1-2/+1
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits) Documentation/iostats.txt: bit-size reference etc. cfq-iosched: removing unnecessary think time checking cfq-iosched: Don't clear queue stats when preempt. blk-throttle: Reset group slice when limits are changed blk-cgroup: Only give unaccounted_time under debug cfq-iosched: Don't set active queue in preempt block: fix non-atomic access to genhd inflight structures block: attempt to merge with existing requests on plug flush block: NULL dereference on error path in __blkdev_get() cfq-iosched: Don't update group weights when on service tree fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away block: Require subsystems to explicitly allocate bio_set integrity mempool jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging fs: make fsync_buffers_list() plug mm: make generic_writepages() use plugging blk-cgroup: Add unaccounted time to timeslice_used. block: fixup plugging stubs for !CONFIG_BLOCK block: remove obsolete comments for blkdev_issue_zeroout. blktrace: Use rq->cmd_flags directly in blk_add_trace_rq. ... Fix up conflicts in fs/{aio.c,super.c}
2011-03-23tmio: Silence warnings introduced by mfd changesAndres Salomon1-4/+4
This silences warnings such as drivers/video/tmiofb.c: In function 'tmiofb_hw_init': drivers/video/tmiofb.c:270: warning: initialization discards qualifiers from pointer target type These were added by me in commit 2a79bb1d. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mmc: Use mfd_data instead of driver_data for tmio-mmcAndres Salomon1-17/+9
Use mfd_data for passing information from mfd drivers to mfd clients. The mfd_cell's driver_data field is being phased out. Clients that were using driver_data now access .mfd_data via mfd_get_data(). This changes tmio-mmc only; mfd drivers with other cells are not modified. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: mfd_cell is now implicitly available to asic3 driversAndres Salomon1-12/+12
No need to explicitly set the cell's platform_data/data_size. Modify clients to use mfd_get_cell helper function instead of accessing platform_data directly. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-22drivers/mmc/host/omap_hsmmc.c: use resource_size()Chris Ball1-4/+3
Use resource_size(). Signed-off-by: Chris Ball <cjb@laptop.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22drivers/mmc/host/omap.c: use resource_size()Chris Ball1-3/+3
Signed-off-by: Chris Ball <cjb@laptop.org> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-18Merge branch 'for-linus' of ↵Linus Torvalds29-252/+1740
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (53 commits) mmc: dw_mmc: support mmc power control with regulator mmc: dw_mmc: fix suspend/resume operation mmc: dw_mmc: add quirks for unreliable card detect, and capabilities mmc: tmio: fix address in kunmap_atomic() calls mmc: core: reset card voltage after power off mmc: core: export function mmc_do_release_host() mmc: sdio: remember new card RCA when redetecting card mmc: dw_mmc: Remove set-but-unused variable. mmc: sdhci-esdhc-imx: add card detect on custom GPIO for mx25/35 mmc: sdhci-esdhc: broken card detection is not a default quirk mmc: sdhci-esdhc-imx: add write protect on custom GPIO on mx25/35 mmc: msm_sdcc: remove needless cache flush after dma_unmap_sg() mmc: sh_mmcif: support aggressive clock gating mmc: check if mmc cards < 2GB do sector addressing mmc: core: comment on why sdio_reset is done at init time mmc: dw_mmc: support DDR mode mmc: via-sdmmc: Remove set-but-unused variable. mmc: cb710: Return err value in cb710_wait_while_busy() mmc: sdhci-pci: Remove set-but-unused variable. mmc: mxs-mmc: add mmc host driver for i.MX23/28 ...
2011-03-18Merge branch 'spi/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-2/+24
* 'spi/next' of git://git.secretlab.ca/git/linux-2.6: (34 commits) spi/dw_spi: move dw_spi.h into drivers/spi spi/dw_spi: Fix missing header gpio/langwell: Clear edge bit before handling gpio/langwell: Simplify demux loop gpio/langwell: Convert irq name space gpio/langwell: Fix broken irq_eoi change. gpio; Make Intel chipset gpio drivers depend on x86 gpio/cs5535-gpio: Fix section mismatch spi/rtc-{ds1390,ds3234,m41t94}: Use spi_get_drvdata() for SPI devices spi/davinci: Support DMA transfers larger than 65535 words spi/davinci: Use correct length parameter to dma_map_single calls gpio: Use __devexit at necessary places gpio: add MODULE_DEVICE_TABLE to pch_gpio and ml_ioh_gpio gpio/mcp23s08: support mcp23s17 variant of_mmc_spi: add card detect irq support spi/omap_mcspi: catch xfers of non-multiple SPI word size spi/omap_mcspi: Off-by-one error in finding the right divisor gpio/pca953x: Fix wrong pointer type spi/pl022: rid dangling labels spi: add support for SuperH SPI ...
2011-03-17Merge branch 'omap-for-linus' of ↵Linus Torvalds2-11/+27
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits) omap: zoom: host should not pull up wl1271's irq line arm: plat-omap: iommu: fix request_mem_region() error path OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 omap4: mux: Remove duplicate mux modes omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected omap4: board-omap4panda: Initialise the serial pads omap3: board-3430sdp: Initialise the serial pads omap4: board-4430sdp: Initialise the serial pads omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init omap2+: mux: Remove the use of IDLE flag omap2+: Add separate list for dynamic pads to mux perf: add OMAP support for the new power events OMAP4: Add IVA OPP enteries. OMAP4: Update Voltage Rail Values for MPU, IVA and CORE OMAP4: Enable 800 MHz and 1 GHz MPU-OPP OMAP3+: OPP: Replace voltage values with Macros OMAP3: wdtimer: Fix CORE idle transition Watchdog: omap_wdt: add fine grain runtime-pm ... Fix up various conflicts in - arch/arm/mach-omap2/board-omap3evm.c - arch/arm/mach-omap2/clock3xxx_data.c - arch/arm/mach-omap2/usb-musb.c - arch/arm/plat-omap/include/plat/usb.h - drivers/usb/musb/musb_core.h
2011-03-17Merge branch 'for-linus' of git://codeaurora.org/quic/kernel/davidb/linux-msmLinus Torvalds2-1/+40
* 'for-linus' of git://codeaurora.org/quic/kernel/davidb/linux-msm: (46 commits) msm: scm: Check for interruption immediately msm: scm: Fix improper register assignment msm: scm: Mark inline asm as volatile msm: iommu: Enable HTW L2 redirection on MSM8960 msm: iommu: Don't read from write-only registers msm: iommu: Remove dependency on IDR msm: iommu: Use ASID tagging instead of VMID tagging msm: iommu: Rework clock logic and add IOMMU bus clock control msm: iommu: Clock control for the IOMMU driver msm: mdp: Set the correct pack pattern for XRGB/ARGB msm_fb: Fix framebuffer console msm: mdp: Add support for RGBX 8888 image format. video: msmfb: Put the partial update magic value into the fix_screen struct. msm: clock: Migrate to clkdev msm: clock: Remove references to clk_ops_pcom msm: headsmp.S: Fix section mismatch msm: Use explicit GPLv2 licenses msm: iommu: Enable IOMMU support for MSM8960 msm: iommu: Generalize platform data for multiple targets msm: iommu: Create a Kconfig item for the IOMMU driver ...
2011-03-17Merge branches 'defcfg', 'drivers' and 'cyberpro-next' of ↵Linus Torvalds2-47/+316
master.kernel.org:/home/rmk/linux-2.6-arm * 'defcfg' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6647/1: add Versatile Express defconfig ARM: 6644/1: mach-ux500: update the U8500 defconfig * 'drivers' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6764/1: pl011: factor out FIFO to TTY code ARM: 6763/1: pl011: add optional RX DMA to PL011 v2 ARM: 6758/1: amba: support pm ops ARM: amba: make amba_driver id_table const ARM: amba: make internal ID table handling const ARM: amba: make probe() functions take const id tables ARM: 6662/1: amba: make amba_bustype non-static ARM: mmci: add dmaengine-based DMA support ARM: mmci: no need for separate host->data_xfered ARM: mmci: avoid unnecessary switch to data available PIO interrupts ARM: mmci: no need to call flush_dcache_page() with sg_miter API ARM: mmci: avoid reporting too many completed bytes on fifo overrun ALSA: AACI: make fifo variables more explanitory ALSA: AACI: no need to call snd_pcm_period_elapsed() for each period ALSA: AACI: use snd_pcm_lib_period_bytes() ALSA: AACI: clean up AACI announcement printk ALSA: AACI: fix channel mask selection ALSA: AACI: fix number of channels for record ALSA: AACI: fix multiple IRQ claiming * 'cyberpro-next' of master.kernel.org:/home/rmk/linux-2.6-arm: VIDEO: cyberpro: remove unused cyber2000fb_get_fb_var() VIDEO: cyberpro: remove useless function extreg pointers VIDEO: cyberpro: update handling of device structures VIDEO: cyberpro: add support for video capture I2C VIDEO: cyberpro: make 'reg_b0_lock' always present VIDEO: cyberpro: add I2C support VIDEO: cyberpro: select lowest multipler/divisor for PLL
2011-03-17Merge remote-tracking branch 'origin' into spi/nextGrant Likely3-9/+12
Pull in Linus' tree to pick up changes required for the langwell gpio fixes
2011-03-17mmc: dw_mmc: support mmc power control with regulatorJaehoon Chung1-0/+25
This patch adds support for power regulators. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: kyungmin Park <kyungmin.park@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17mmc: dw_mmc: fix suspend/resume operationJaehoon Chung1-2/+20
This patch is related to re-init processing on suspend/resume. When card is resuming, some register is reset. If card is removable, maybe controller should be rescan for card. But if assume card is non-removable, need to restore the old value at registers. We store the value of FIFOTH at probe time and then restore it in dw_mci_resume(). Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17mmc: dw_mmc: add quirks for unreliable card detect, and capabilitiesJaehoon Chung1-2/+8
This patch adds quirks and capabilities to platdata. Some cards don't use the CDn pin; in that case, we assume the card's inserted. Some boards need other capabilities. So, we add capabilities in the board's platdata. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17mmc: tmio: fix address in kunmap_atomic() callsGuennadi Liakhovetski1-5/+5
Currently kunmap_atomic() doesn't take into account the offset, used with kmap_atomic(). On platforms, where kunmap_atomic() is not a NOP, this will lead to problems, when offset != 0. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17mmc: core: reset card voltage after power offUlf Hansson1-0/+7
At power off, reset OCR mask to be the highest possible voltage supported for the current mmc host. This solves the re-initialization during the power up sequence. The voltage may have been decreased due to the card accepts a lower voltage than the voltage used during the initialization sequence. We need to reset the voltage to by the host highest possible value since according to specification the initialization must always be done at high voltage. Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17mmc: core: export function mmc_do_release_host()Ulf Hansson1-1/+9
When using mmc_try_claim_host the corresponding release function is mmc_do_release_host, which then also must be exported. Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Reviewed-by: Sebastian Rasmussen <sebastian.rasmussen@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17mmc: sdio: remember new card RCA when redetecting cardStefan Nilsson XK1-0/+8
During redetection of a SDIO card, a request for a new card RCA was submitted to the card, but was then overwritten by the old RCA. This caused the card to be deselected instead of selected when using the incorrect RCA. This bug's been present since the "oldcard" handling was introduced in 2.6.32. Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com> Reviewed-by: Ulf Hansson <ulf.hansson@stericsson.com> Reviewed-by: Pawel Wieczorkiewicz <pawel.wieczorkiewicz@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17mmc: dw_mmc: Remove set-but-unused variable.Chris Ball1-5/+1
count is only ever used by assigning to old_len if count == 0, and then old_len isn't ever used at all. So, both are redundant. Fixes: drivers/mmc/host/dw_mmc.c: In function ‘dw_mci_read_data_pio’: drivers/mmc/host/dw_mmc.c:1034:32: warning: variable ‘old_len’ set but not used [-Wunused-but-set-variable] Signed-off-by: Chris Ball <cjb@laptop.org> Acked-by: Will Newton <will.newton@imgtec.com>
2011-03-17mmc: sdhci-esdhc-imx: add card detect on custom GPIO for mx25/35Wolfram Sang1-0/+79
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Marc Reilly <marc@cpdesign.com.au> Tested-by: Eric Benard <eric@eukrea.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17mmc: sdhci-esdhc: broken card detection is not a default quirkWolfram Sang3-3/+4
It can be worked around using a GPIO which will be done for i.MX later. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Tested-by: Marc Reilly <marc@cpdesign.com.au> Tested-by: Eric Benard <eric@eukrea.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17mmc: sdhci-esdhc-imx: add write protect on custom GPIO on mx25/35Wolfram Sang1-11/+41
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Tested-by: Marc Reilly <marc@cpdesign.com.au> Tested-by: Eric Benard <eric@eukrea.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17mmc: msm_sdcc: remove needless cache flush after dma_unmap_sg()Linus Walleij1-8/+0
dma_unmap_sg() already flushes the cache, I don't get what this code is doing here. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-17Merge branches 'aaci', 'mmci-dma', 'pl' and 'pl011' into driversRussell King8-163/+399
2011-03-16Merge remote branch 'rmk/for-linus' into for-linusDavid Brown7-93/+68
* rmk/for-linus: (1557 commits) ARM: 6806/1: irq: introduce entry and exit functions for chained handlers ARM: 6781/1: Thumb-2: Work around buggy Thumb-2 short branch relocations in gas ARM: 6747/1: P2V: Thumb2 support ARM: 6798/1: aout-core: zero thread debug registers in a.out core dump ARM: 6796/1: Footbridge: Fix I/O mappings for NOMMU mode ARM: 6784/1: errata: no automatic Store Buffer drain on Cortex-A9 ARM: 6772/1: errata: possible fault MMU translations following an ASID switch ARM: 6776/1: mach-ux500: activate fix for errata 753970 ARM: 6794/1: SPEAr: Append UL to device address macros. ARM: 6793/1: SPEAr: Remove unused *_SIZE macros from spear*.h files ARM: 6792/1: SPEAr: Replace SIZE macro's with SZ_4K macros ARM: 6791/1: SPEAr3xx: Declare device structures after shirq code ARM: 6790/1: SPEAr: Clock Framework: Rename usbd clock and align apb_clk entry ARM: 6789/1: SPEAr3xx: Rename sdio to sdhci ARM: 6788/1: SPEAr: Include mach/hardware.h instead of mach/spear.h ARM: 6787/1: SPEAr: Reorder #includes in .h & .c files. ARM: 6681/1: SPEAr: add debugfs support to clk API ARM: 6703/1: SPEAr: update clk API support ARM: 6679/1: SPEAr: make clk API functions more generic ARM: 6737/1: SPEAr: formalized timer support ... Conflicts: arch/arm/mach-msm/board-msm7x27.c arch/arm/mach-msm/board-msm7x30.c arch/arm/mach-msm/board-qsd8x50.c arch/arm/mach-msm/board-sapphire.c arch/arm/mach-msm/include/mach/memory.h
2011-03-16Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-6/+9
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: (21 commits) tty: serial: altera_jtaguart: Add device tree support tty: serial: altera_uart: Add devicetree support dt: eliminate of_platform_driver shim code dt: Eliminate of_platform_{,un}register_driver dt/serial: Eliminate users of of_platform_{,un}register_driver dt/usb: Eliminate users of of_platform_{,un}register_driver dt/video: Eliminate users of of_platform_{,un}register_driver dt/net: Eliminate users of of_platform_{,un}register_driver dt/sound: Eliminate users of of_platform_{,un}register_driver dt/spi: Eliminate users of of_platform_{,un}register_driver dt: uartlite: merge platform and of_platform driver bindings dt: xilinx_hwicap: merge platform and of_platform driver bindings ipmi: convert OF driver to platform driver leds/leds-gpio: merge platform_driver with of_platform_driver dt/sparc: Eliminate users of of_platform_{,un}register_driver dt/powerpc: Eliminate users of of_platform_{,un}register_driver dt/powerpc: move of_bus_type infrastructure to ibmebus drivercore/dt: add a match table pointer to struct device dt: Typo fix. altera_ps2: Add devicetree support ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 11:45:21 +0000