summaryrefslogtreecommitdiff
path: root/drivers/media/radio
AgeCommit message (Collapse)AuthorFilesLines
2014-11-18upstream: [media] tef6862: fix warning on avr32 archMauro Carvalho Chehab1-10/+10
On avr32 arch, we get those warnings: drivers/media/radio/tef6862.c:59:1: warning: "MODE_SHIFT" redefined In file included from /devel/v4l/ktest-build/arch/avr32/include/asm/ptrace.h:11, arch/avr32/include/uapi/asm/ptrace.h:41:1: warning: this is the location of the previous definition Prefix MSA_ to the MSA register bitmap macros, to avoid reusing the same symbol. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] si470x: add check to test if this is really a si470xHans Verkuil1-0/+24
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] si470x: don't use buffer on the stack for USB transfersHans Verkuil2-26/+32
You shouldn't use buffers allocated on the stack for USB transfers, always kmalloc them. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] media_tree: Fix spelling errorsJonathan McCrohan1-2/+2
Fix various spelling errors in strings and comments throughout the media tree. The majority of these were found using Lucas De Marchi's codespell tool. [m.chehab@samsung.com: discard hunks with conflicts] Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Conflicts: drivers/media/dvb-frontends/drxk_hard.c drivers/media/i2c/adv7842.c drivers/media/i2c/s5c73m3/s5c73m3-core.c
2014-11-18upstream: [media] si4713: fix Kconfig dependenciesHans Verkuil1-3/+3
The SI4713 select should be I2C_SI4713 and the USB driver needs to depend on I2C as well. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Paul Bolle <pebolle@tiscali.nl> Reported-by: Richard Weinberger <richard@nod.at> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] radio-cadet: avoid interruptible_sleep_on raceHans Verkuil1-19/+27
interruptible_sleep_on is racy and going away. This replaces one use in the radio-cadet driver with a wait_event_interruptible call. Special care was taken that accesses to the rdsin and rdsout indices are always done with dev->lock held. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] radio-usb-si4713: make array of structs constHans Verkuil1-2/+2
The start_seq[] should be const. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] radio-keene: Use module_usb_driverSachin Kamat1-18/+1
module_usb_driver eliminates the boilerplate and makes the code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] radio-usb-si4713: fix sparse non static symbol warningsWei Yongjun1-2/+2
Fixes the following sparse warnings: drivers/media/radio/si4713/radio-usb-si4713.c:226:31: warning: symbol 'start_seq' was not declared. Should it be static? drivers/media/radio/si4713/radio-usb-si4713.c:291:29: warning: symbol 'command_table' was not declared. Should it be static? Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] tea575x: Fix build with ARCH=c6xMauro Carvalho Chehab1-1/+1
In file included from /devel/v4l/temp/include/asm-generic/page.h:23:0, from /devel/v4l/temp/arch/c6x/include/asm/page.h:9, from /devel/v4l/temp/include/asm-generic/io.h:14, from arch/c6x/include/generated/asm/io.h:1, from /devel/v4l/temp/drivers/media/radio/tea575x.c:23: /devel/v4l/temp/arch/c6x/include/asm/setup.h:17:27: error: unknown type name ‘phys_addr_t’ extern int c6x_add_memory(phys_addr_t start, unsigned long size); It seems that, on such arch, the includes from asm/ should be after the ones from linux/. The proper fix would be to patch the arch files, but, as this fix is trivial, apply it. Also, we generally put the asm includes after the linux ones, anyway. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] radio-usb-si4713: make si4713_register_i2c_adapter staticMauro Carvalho Chehab1-1/+1
This function isn't used nowhere outside the same .c file. Fixes this warning: drivers/media/radio/si4713/radio-usb-si4713.c:418:5: warning: no previous prototype for 'si4713_register_i2c_adapter' [-Wmissing-prototypes] int si4713_register_i2c_adapter(struct si4713_usb_device *radio) ^ Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] si4713: coding style time-related cleanupsHans Verkuil1-4/+7
Fix the non-whitespace checkpatch errors/warnings. Replace msleep with usleep_range and the jiffies comparison with time_is_after_jiffies(). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Dinesh Ram <dinesh.ram@cern.ch> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] si4713: coding style whitespace cleanupsHans Verkuil1-47/+49
Fix most whitespace-related checkpatch errors/warnings. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Dinesh Ram <dinesh.ram@cern.ch> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] si4713: print product numberEduardo Valentin1-1/+1
Print the PN value, useful to check what chip the dev board has. Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] si4713: si4713_set_rds_radio_text overwrites terminating \0Hans Verkuil1-2/+3
si4713_set_rds_radio_text will overwrite the terminating zero at the end of the rds radio text string in order to send out a carriage return as per the RDS spec. Use a separate char buffer for the CR instead of corrupting the control string. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] si4713: move supply list to si4713_platform_dataDinesh Ram2-27/+28
The supply list is needed by the platform driver, but not by the usb driver. So this information belongs to the platform data and should not be hardcoded in the subdevice driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] si4713: Added the USB driver for Si4713Dinesh Ram3-0/+556
This is the USB driver for the Silicon Labs development board. It contains the Si4713 FM transmitter chip. Signed-off-by: Dinesh Ram <dinesh.ram@cern.ch> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] si4713: Bug fix for si4713_tx_tune_power() method in the ↵Dinesh Ram1-8/+8
i2c driver In the si4713_tx_tune_power() method, the args array element 'power' can take values between SI4713_MIN_POWER and SI4713_MAX_POWER. power = 0 is also valid. All the values (0 > power < SI4713_MIN_POWER) are illegal and hence are all mapped to SI4713_MIN_POWER. Signed-off-by: Dinesh Ram <dinesh.ram@cern.ch> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] si4713: Reorganized includes in si4713.c/hDinesh Ram2-1/+1
Moved the header <linux/regulator/consumer.h> from si4713.c to si4713.h Signed-off-by: Dinesh Ram <dinesh.ram@cern.ch> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] si4713: Modified i2c driver to handle cases where ↵Dinesh Ram1-44/+64
interrupts are not used Checks have been introduced at several places in the code to test if an interrupt is set or not. For devices which do not use the interrupt, to get a valid response, within a specified timeout, the device is polled instead. Signed-off-by: Dinesh Ram <dinesh.ram@cern.ch> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] si4713: Reorganized drivers/media/radio directoryDinesh Ram7-26/+39
Added a new si4713 directory which will contain all si4713 related files. Also updated Makefile and Kconfig Signed-off-by: Dinesh Ram <dinesh.ram@cern.ch> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] tef6862/radio-tea5764: actually assign clamp resultHans Verkuil2-2/+2
When adding frequency clamping to the tef6862 and radio-tea5764 drivers I forgot to actually *assign* the clamp result to the frequency. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Hans Petter Selasky <hps@bitfrost.no> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: stable@vger.kernel.org # for 3.11 and up
2014-11-18upstream: [media] radio-shark2: Mark shark_resume_leds() inline to kill ↵Hans de Goede1-3/+1
compiler warning This mirrors the patch to the radio-shark driver by Geert Uytterhoeven. If SHARK_USE_LEDS=1, but CONFIG_PM=n: drivers/media/radio/radio-shark2.c:240: warning: ‘shark_resume_leds’ defined but not used Instead of making the #ifdef logic even more complicated (there are already two definitions of shark_resume_leds()), mark shark_resume_leds() inline to kill the compiler warning. shark_resume_leds() is small and it has only one caller. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] radio-shark: Mark shark_resume_leds() inline to kill ↵Geert Uytterhoeven1-3/+1
compiler warning If SHARK_USE_LEDS=1, but CONFIG_PM=n: drivers/media/radio/radio-shark.c:275: warning: ‘shark_resume_leds’ defined but not used Instead of making the #ifdef logic even more complicated (there are already two definitions of shark_resume_leds()), mark shark_resume_leds() inline to kill the compiler warning. shark_resume_leds() is small and it has only one caller. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] radio-si470x-i2c: fix a warning on ia64Mauro Carvalho Chehab1-2/+2
on ia64, those warnings appear: drivers/media/radio/si470x/radio-si470x-i2c.c:470:12: warning: 'si470x_i2c_suspend' defined but not used [-Wunused-function] drivers/media/radio/si470x/radio-si470x-i2c.c:487:12: warning: 'si470x_i2c_resume' defined but not used [-Wunused-function] They're caused because the PM logic uses this define: #define SET_SYSTEM_SLEEP_PM_OPS() With is only defined for CONFIG_PM_SLEEP. So, change the logic there to test for CONFIG_PM_SLEEP, instead of CONFIG_PM. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] radio-shark: remove a warning when CONFIG_PM is not definedMauro Carvalho Chehab2-0/+4
On alpha, allyesconfig doesn't have CONFIG_PM, and produces the following warnings: drivers/media/radio/radio-shark.c:274:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] drivers/media/radio/radio-shark2.c:240:13: warning: 'shark_resume_leds' defined but not used [-Wunused-function] That's because those functions are used only at device resume. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] radio-si4713: remove deprecated IRQF_DISABLEDMichael Opdenacker1-1/+1
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] media: Remove unnecessary semicolonsJoe Perches1-1/+1
These aren't necessary after switch and while statements. Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] radio-keene: fix sparse warningHans Verkuil1-1/+1
drivers/media/radio/radio-keene.c:126:45: warning: dubious: !x | y Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] fmdrv_common: fix sparse warningHans Verkuil1-1/+1
drivers/media/radio/wl128x/fmdrv_common.c:178:6: warning: symbol 'g_st_write' was not declared. Should it be static? Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] radio-sf16fmr2: Remove redundant dev_set_drvdataSachin Kamat1-1/+0
Driver core sets driver data to NULL upon failure or remove. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] snd_tea575x: precedence bug in fmr2_tea575x_get_pins()Dan Carpenter1-2/+2
The "|" operation has higher precedence that "?:" so this couldn't return both flags set at once as intended. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] radio-si470x-usb: Remove software version checkHans de Goede1-11/+0
We've an user reporting a device with a software version of 0, which works fine. Once we lower the version check to accept version 0 it becomes a nop, so remove it completely. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] tea575x: Move from sound to mediaOndrej Zary3-3/+587
Move tea575x from sound/i2c/other to drivers/media/radio Includes Kconfig changes by Hans Verkuil. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] tea575x: Move header from sound to mediaOndrej Zary3-3/+3
Move include/sound/tea575x-tuner.h to include/media/tea575x.h and update files that include it. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] radio-aztech: Implement signal strength detection and fix ↵Ondrej Zary1-9/+4
stereo detection Current stereo detection code is wrong - it reads TUNED bit instead of STEREO bit. Fix that and implement signal strength detection too. Also remove useless s_stereo functionn. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] radio-aztech: Convert to generic lm7000 implementationOndrej Zary1-44/+24
Aztech radio card is based on LM7001 chip which is (software) compatible with LM7000. So remove the LM7000-specific code from the driver and use generic code. Also found that the card does not have A0..A2 ISA pins connected, which means that the region size is 8 bytes. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] drivers/media/radio/radio-maxiradio: Convert to ↵Libo Chen1-12/+1
module_pci_driver use module_pci_driver instead of init/exit, make code clean Signed-off-by: Libo Chen <libo.chen@huawei.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-11-18upstream: [media] wl128x: add missing struct v4l2_deviceHans Verkuil2-0/+10
This struct is now required for all video device nodes, but it was missing in this driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2014-11-18upstream: [media] radio-sf16fmi: Set frequency during initOndrej Zary1-8/+17
Set freqency during initialization to fix v4l2-compliance error. This also fixes VIDIOC_G_FREQUENCY always returning zero (broken by me during LM7000 conversion). Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2014-11-18upstream: [media] radio-sf16fmi: Add module name to bus_infoOndrej Zary1-1/+1
Fix v4l2-compliance in VIDIOC_QUERYCAP by changing "ISA" to "ISA:radio-sf16fmi". Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2014-11-18upstream: [media] radio-sf16fmi: add control event and prio supportHans Verkuil1-0/+8
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2014-11-18upstream: [media] radio-sf16fmi: convert to the control frameworkHans Verkuil1-31/+25
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2014-11-18upstream: [media] radio-sf16fmi: clamp frequencyHans Verkuil1-6/+5
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2014-11-18upstream: [media] radio-sf16fmi: add device_caps support to querycapHans Verkuil1-1/+2
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2014-11-18upstream: [media] radio-sf16fmi: remove audio/input ioctlsHans Verkuil1-30/+0
The audio and input ioctls do not apply to radio devices. Remove them. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2014-11-18upstream: [media] tef6862: clamp frequencyHans Verkuil1-4/+6
Clamp the frequency to the valid frequency range as per the V4L2 specification. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2014-11-18upstream: [media] radio-timb: add control events and prio supportHans Verkuil1-0/+9
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2014-11-18upstream: [media] radio-timb: actually load the requested subdevsHans Verkuil1-4/+9
For some reason the tuner and dsp subdevs were never actually loaded. Added the relevant code to do that. Also remove bogus calls to video_device_release_empty(). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2014-11-18upstream: [media] radio-timb: convert to the control frameworkHans Verkuil1-24/+0
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 21:31:39 +0000