summaryrefslogtreecommitdiff
path: root/drivers/md
AgeCommit message (Collapse)AuthorFilesLines
2013-08-04dm verity: fix inability to use a few specific devices sizesMikulas Patocka1-3/+2
commit b1bf2de07271932326af847a3c6a01fdfd29d4be upstream. Fix a boundary condition that caused failure for certain device sizes. The problem is reported at http://code.google.com/p/cryptsetup/issues/detail?id=160 For certain device sizes the number of hashes at a specific level was calculated incorrectly. It happens for example for a device with data and metadata block size 4096 that has 16385 blocks and algorithm sha256. The user can test if he is affected by this bug by running the "veritysetup verify" command and also by activating the dm-verity kernel driver and reading the whole block device. If it passes without an error, then the user is not affected. The condition for the bug is: Split the total number of data blocks (data_block_bits) into bit strings, each string has hash_per_block_bits bits. hash_per_block_bits is rounddown(log2(metadata_block_size/hash_digest_size)). Equivalently, you can say that you convert data_blocks_bits to 2^hash_per_block_bits base. If there some zero bit string below the most significant bit string and at least one bit below this zero bit string is set, then the bug happens. The same bug exists in the userspace veritysetup tool, so you must use fixed veritysetup too if you want to use devices that are affected by this boundary condition. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Milan Broz <gmazyland@gmail.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-04dm ioctl: set noio flag to avoid __vmalloc deadlockMikulas Patocka1-0/+3
commit 1c0e883e86ece31880fac2f84b260545d66a39e0 upstream. Set noio flag while calling __vmalloc() because it doesn't fully respect gfp flags to avoid a possible deadlock (see commit 502624bdad3dba45dfaacaf36b7d83e39e74b2d2). This should be backported to stable kernels 3.8 and newer. The kernel 3.8 doesn't have memalloc_noio_save(), so we should set and restore process flag PF_MEMALLOC instead. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-04dm mpath: fix ioctl deadlock when no pathsHannes Reinecke2-7/+10
commit 6c182cd88d179cbbd06f4f8a8a19b6977940753f upstream. When multipath needs to retry an ioctl the reference to the current live table needs to be dropped. Otherwise a deadlock occurs when all paths are down: - dm_blk_ioctl takes a reference to the current table and spins in multipath_ioctl(). - A new table is being loaded, but upon resume the process hangs in dm_table_destroy() waiting for references to drop to zero. With this patch the reference to the old table is dropped prior to retry, thereby avoiding the deadlock. Signed-off-by: Hannes Reinecke <hare@suse.de> Cc: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-04md/raid10: remove use-after-free bug.NeilBrown1-1/+7
commit 0eb25bb027a100f5a9df8991f2f628e7d851bc1e upstream. We always need to be careful when calling generic_make_request, as it can start a chain of events which might free something that we are using. Here is one place I wasn't careful enough. If the wbio2 is not in use, then it might get freed at the first generic_make_request call. So perform all necessary tests first. This bug was introduced in 3.3-rc3 (24afd80d99) and can cause an oops, so fix is suitable for any -stable since then. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-04md/raid5: fix interaction of 'replace' and 'recovery'.NeilBrown2-5/+11
commit f94c0b6658c7edea8bc19d13be321e3860a3fa54 upstream. If a device in a RAID4/5/6 is being replaced while another is being recovered, then the writes to the replacement device currently don't happen, resulting in corruption when the replacement completes and the new drive takes over. This is because the replacement writes are only triggered when 's.replacing' is set and not when the similar 's.sync' is set (which is the case during resync and recovery - it means all devices need to be read). So schedule those writes when s.replacing is set as well. In this case we cannot use "STRIPE_INSYNC" to record that the replacement has happened as that is needed for recording that any parity calculation is complete. So introduce STRIPE_REPLACED to record if the replacement has happened. For safety we should also check that STRIPE_COMPUTE_RUN is not set. This has a similar effect to the "s.locked == 0" test. The latter ensure that now IO has been flagged but not started. The former checks if any parity calculation has been flagged by not started. We must wait for both of these to complete before triggering the 'replace'. Add a similar test to the subsequent check for "are we finished yet". This possibly isn't needed (is subsumed in the STRIPE_INSYNC test), but it makes it more obvious that the REPLACE will happen before we think we are finished. Finally if a NeedReplace device is not UPTODATE then that is an error. We really must trigger a warning. This bug was introduced in commit 9a3e1101b827a59ac9036a672f5fa8d5279d0fe2 (md/raid5: detect and handle replacements during recovery.) which introduced replacement for raid5. That was in 3.3-rc3, so any stable kernel since then would benefit from this fix. Reported-by: qindehua <13691222965@163.com> Tested-by: qindehua <qindehua@163.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-04md/raid1: fix bio handling problems in process_checks()NeilBrown1-23/+30
commit 30bc9b53878a9921b02e3b5bc4283ac1c6de102a upstream. Recent change to use bio_copy_data() in raid1 when repairing an array is faulty. The underlying may have changed the bio in various ways using bio_advance and these need to be undone not just for the 'sbio' which is being copied to, but also the 'pbio' (primary) which is being copied from. So perform the reset on all bios that were read from and do it early. This also ensure that the sbio->bi_io_vec[j].bv_len passed to memcmp is correct. This fixes a crash during a 'check' of a RAID1 array. The crash was introduced in 3.10 so this is suitable for 3.10-stable. Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-04md: Remove recent change which allows devices to skip recovery.NeilBrown1-14/+0
commit 5024c298311f3b97c85cb034f9edaa333fdb9338 upstream. commit 7ceb17e87bde79d285a8b988cfed9eaeebe60b86 md: Allow devices to be re-added to a read-only array. allowed a bit more than just that. It also allows devices to be added to a read-write array and to end up skipping recovery. This patch removes the offending piece of code pending a rewrite for a subsequent release. More specifically: If the array has a bitmap, then the device will still need a bitmap based resync ('saved_raid_disk' is set under different conditions is a bitmap is present). If the array doesn't have a bitmap, then this is correct as long as nothing has been written to the array since the metadata was checked by ->validate_super. However there is no locking to ensure that there was no write. Bug was introduced in 3.10 and causes data corruption so patch is suitable for 3.10-stable. Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28bcache: Journal replay fixKent Overstreet1-1/+6
commit faa5673617656ee58369a3cfe4a312cfcdc59c81 upstream. The journal replay code starts by finding something that looks like a valid journal entry, then it does a binary search over the unchecked region of the journal for the journal entries with the highest sequence numbers. Trouble is, the logic was wrong - journal_read_bucket() returns true if it found journal entries we need, but if the range of journal entries we're looking for loops around the end of the journal - in that case journal_read_bucket() could return true when it hadn't found the highest sequence number we'd seen yet, and in that case the binary search did the wrong thing. Whoops. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28bcache: Fix GC_SECTORS_USED() calculationKent Overstreet1-1/+3
commit 29ebf465b9050f241c4433a796a32e6c896a9dcd upstream. Part of the job of garbage collection is to add up however many sectors of live data it finds in each bucket, but that doesn't work very well if it doesn't reset GC_SECTORS_USED() when it starts. Whoops. This wouldn't have broken anything horribly, but allocation tries to preferentially reclaim buckets that are mostly empty and that's not gonna work with an incorrect GC_SECTORS_USED() value. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28bcache: Fix a sysfs splat on shutdownKent Overstreet2-1/+11
commit c9502ea4424b31728703d113fc6b30bfead14633 upstream. If we stopped a bcache device when we were already detaching (or something like that), bcache_device_unlink() would try to remove a symlink from sysfs that was already gone because the bcache dev kobject had already been removed from sysfs. So keep track of whether we've removed stuff from sysfs. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28bcache: Shutdown fixKent Overstreet1-7/+11
commit 5caa52afc5abd1396e4af720469abb5843a71eb8 upstream. Stopping a cache set is supposed to make it stop attached backing devices, but somewhere along the way that code got lost. Fixing this mainly has the effect of fixing our reboot notifier. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28bcache: Advertise that flushes are supportedKent Overstreet2-1/+9
commit 54d12f2b4fd0f218590d1490b41a18d0e2328a9a upstream. Whoops - bcache's flush/FUA was mostly correct, but flushes get filtered out unless we say we support them... Signed-off-by: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-28bcache: Fix a dumb raceKent Overstreet1-2/+4
commit 6aa8f1a6ca41c49721d2de4e048d3da8d06411f9 upstream. In the far-too-complicated closure code - closures can have destructors, for probably dubious reasons; they get run after the closure is no longer waiting on anything but before dropping the parent ref, intended just for freeing whatever memory the closure is embedded in. Trouble is, when remaining goes to 0 and we've got nothing more to run - we also have to unlock the closure, setting remaining to -1. If there's a destructor, that unlock isn't doing anything - nobody could be trying to lock it if we're about to free it - but if the unlock _is needed... that check for a destructor was racy. Argh. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-25md/raid10: fix two problems with RAID10 resync.NeilBrown1-2/+9
commit 7bb23c4934059c64cbee2e41d5d24ce122285176 upstream. 1/ When an different between blocks is found, data is copied from one bio to the other. However bv_len is used as the length to copy and this could be zero. So use r10_bio->sectors to calculate length instead. Using bv_len was probably always a bit dubious, but the introduction of bio_advance made it much more likely to be a problem. 2/ When preparing some blocks for sync, we don't set BIO_UPTODATE except on bios that we schedule for a read. This ensures that missing/failed devices don't confuse the loop at the top of sync_request write. Commit 8be185f2c9d54d6 "raid10: Use bio_reset()" removed a loop which set BIO_UPTDATE on all appropriate bios. So we need to re-add that flag. These bugs were introduced in 3.10, so this patch is suitable for 3.10-stable, and can remove a potential for data corruption. Reported-by: Brassow Jonathan <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-25md/raid10: fix two bugs affecting RAID10 reshape.NeilBrown1-2/+2
commit 78eaa0d4cbcdb345992fa3dd22b3bcbb473cc064 upstream. 1/ If a RAID10 is being reshaped to a fewer number of devices and is stopped while this is ongoing, then when the array is reassembled the 'mirrors' array will be allocated too small. This will lead to an access error or memory corruption. 2/ A sanity test for a reshaping RAID10 array is restarted is slightly incorrect. Due to the first bug, this is suitable for any -stable kernel since 3.5 where this code was introduced. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-25md/raid10: fix bug which causes all RAID10 reshapes to move no data.NeilBrown1-5/+4
commit 1376512065b23f39d5f9a160948f313397dde972 upstream. The recent comment: commit 7e83ccbecd608b971f340e951c9e84cd0343002f md/raid10: Allow skipping recovery when clean arrays are assembled Causes raid10 to skip a recovery in certain cases where it is safe to do so. Unfortunately it also causes a reshape to be skipped which is never safe. The result is that an attempt to reshape a RAID10 will appear to complete instantly, but no data will have been moves so the array will now contain garbage. (If nothing is written, you can recovery by simple performing the reverse reshape which will also complete instantly). Bug was introduced in 3.10, so this is suitable for 3.10-stable. Signed-off-by: NeilBrown <neilb@suse.de> Cc: Martin Wilck <mwilck@arcor.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-13Merge tag 'md-3.10-fixes' of git://neil.brown.name/mdLinus Torvalds4-26/+47
Pull md bugfixes from Neil Brown: "A few bugfixes for md Some tagged for -stable" * tag 'md-3.10-fixes' of git://neil.brown.name/md: md/raid1,5,10: Disable WRITE SAME until a recovery strategy is in place md/raid1,raid10: use freeze_array in place of raise_barrier in various places. md/raid1: consider WRITE as successful only if at least one non-Faulty and non-rebuilding drive completed it. md: md_stop_writes() should always freeze recovery.
2013-06-13md/raid1,5,10: Disable WRITE SAME until a recovery strategy is in placeH. Peter Anvin3-5/+6
There are cases where the kernel will believe that the WRITE SAME command is supported by a block device which does not, in fact, support WRITE SAME. This currently happens for SATA drivers behind a SAS controller, but there are probably a hundred other ways that can happen, including drive firmware bugs. After receiving an error for WRITE SAME the block layer will retry the request as a plain write of zeroes, but mdraid will consider the failure as fatal and consider the drive failed. This has the effect that all the mirrors containing a specific set of data are each offlined in very rapid succession resulting in data loss. However, just bouncing the request back up to the block layer isn't ideal either, because the whole initial request-retry sequence should be inside the write bitmap fence, which probably means that md needs to do its own conversion of WRITE SAME to write zero. Until the failure scenario has been sorted out, disable WRITE SAME for raid1, raid5, and raid10. [neilb: added raid5] This patch is appropriate for any -stable since 3.7 when write_same support was added. Cc: stable@vger.kernel.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-13md/raid1,raid10: use freeze_array in place of raise_barrier in various places.NeilBrown2-18/+18
Various places in raid1 and raid10 are calling raise_barrier when they really should call freeze_array. The former is only intended to be called from "make_request". The later has extra checks for 'nr_queued' and makes a call to flush_pending_writes(), so it is safe to call it from within the management thread. Using raise_barrier will sometimes deadlock. Using freeze_array should not. As 'freeze_array' currently expects one request to be pending (in handle_read_error - the only previous caller), we need to pass it the number of pending requests (extra) to ignore. The deadlock was made particularly noticeable by commits 050b66152f87c7 (raid10) and 6b740b8d79252f13 (raid1) which appeared in 3.4, so the fix is appropriate for any -stable kernel since then. This patch probably won't apply directly to some early kernels and will need to be applied by hand. Cc: stable@vger.kernel.org Reported-by: Alexander Lyakas <alex.bolshoy@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-13md/raid1: consider WRITE as successful only if at least one non-Faulty and ↵Alex Lyakas2-2/+22
non-rebuilding drive completed it. Without that fix, the following scenario could happen: - RAID1 with drives A and B; drive B was freshly-added and is rebuilding - Drive A fails - WRITE request arrives to the array. It is failed by drive A, so r1_bio is marked as R1BIO_WriteError, but the rebuilding drive B succeeds in writing it, so the same r1_bio is marked as R1BIO_Uptodate. - r1_bio arrives to handle_write_finished, badblocks are disabled, md_error()->error() does nothing because we don't fail the last drive of raid1 - raid_end_bio_io() calls call_bio_endio() - As a result, in call_bio_endio(): if (!test_bit(R1BIO_Uptodate, &r1_bio->state)) clear_bit(BIO_UPTODATE, &bio->bi_flags); this code doesn't clear the BIO_UPTODATE flag, and the whole master WRITE succeeds, back to the upper layer. So we returned success to the upper layer, even though we had written the data onto the rebuilding drive only. But when we want to read the data back, we would not read from the rebuilding drive, so this data is lost. [neilb - applied identical change to raid10 as well] This bug can result in lost data, so it is suitable for any -stable kernel. Cc: stable@vger.kernel.org Signed-off-by: Alex Lyakas <alex@zadarastorage.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-13md: md_stop_writes() should always freeze recovery.NeilBrown1-1/+1
__md_stop_writes() will currently sometimes freeze recovery. So any caller must be ready for that to happen, and indeed they are. However if __md_stop_writes() doesn't freeze_recovery, then a recovery could start before mddev_suspend() is called, which could be awkward. This can particularly cause problems or dm-raid. So change __md_stop_writes() to always freeze recovery. This is safe and more predicatable. Reported-by: Brassow Jonathan <jbrassow@redhat.com> Tested-by: Brassow Jonathan <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-12Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds6-124/+102
Pull block layer fixes from Jens Axboe: "Outside of bcache (which really isn't super big), these are all few-liners. There are a few important fixes in here: - Fix blk pm sleeping when holding the queue lock - A small collection of bcache fixes that have been done and tested since bcache was included in this merge window. - A fix for a raid5 regression introduced with the bio changes. - Two important fixes for mtip32xx, fixing an oops and potential data corruption (or hang) due to wrong bio iteration on stacked devices." * 'for-linus' of git://git.kernel.dk/linux-block: scatterlist: sg_set_buf() argument must be in linear mapping raid5: Initialize bi_vcnt pktcdvd: silence static checker warning block: remove refs to XD disks from documentation blkpm: avoid sleep when holding queue lock mtip32xx: Correctly handle bio->bi_idx != 0 conditions mtip32xx: Fix NULL pointer dereference during module unload bcache: Fix error handling in init code bcache: clarify free/available/unused space bcache: drop "select CLOSURES" bcache: Fix incompatible pointer type warning
2013-05-30raid5: Initialize bi_vcntKent Overstreet1-0/+2
The patch that converted raid5 to use bio_reset() forgot to initialize bi_vcnt. Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: NeilBrown <neilb@suse.de> Cc: linux-raid@vger.kernel.org Tested-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-05-19dm thin: fix metadata dev resize detectionAlasdair G Kergon1-2/+2
Fix detection of the need to resize the dm thin metadata device. The code incorrectly tried to extend the metadata device when it didn't need to due to a merging error with patch 24347e9 ("dm thin: detect metadata device resizing"). device-mapper: transaction manager: couldn't open metadata space map device-mapper: thin metadata: tm_open_with_sm failed device-mapper: thin: aborting transaction failed device-mapper: thin: switching pool to failure mode Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-15Merge branch 'bcache-for-upstream' of ↵Jens Axboe5-124/+100
git://evilpiepirate.org/~kent/linux-bcache into for-linus Kent writes: Jens - couple more bcache patches. Bug fixes and a doc update.
2013-05-15bcache: Fix error handling in init codeKent Overstreet4-121/+99
This code appears to have rotted... fix various bugs and do some refactoring. Signed-off-by: Kent Overstreet <koverstreet@google.com>
2013-05-15bcache: drop "select CLOSURES"Paul Bolle1-1/+0
The Kconfig entry for BCACHE selects CLOSURES. But there's no Kconfig symbol CLOSURES. That symbol was used in development versions of bcache, but was removed when the closures code was no longer provided as a kernel library. It can safely be dropped. Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
2013-05-15bcache: Fix incompatible pointer type warningEmil Goode1-2/+1
The function pointer release in struct block_device_operations should point to functions declared as void. Sparse warnings: drivers/md/bcache/super.c:656:27: warning: incorrect type in initializer (different base types) drivers/md/bcache/super.c:656:27: expected void ( *release )( ... ) drivers/md/bcache/super.c:656:27: got int ( static [toplevel] *<noident> )( ... ) drivers/md/bcache/super.c:656:2: warning: initialization from incompatible pointer type [enabled by default] drivers/md/bcache/super.c:656:2: warning: (near initialization for ‘bcache_ops.release’) [enabled by default] Signed-off-by: Emil Goode <emilgoode@gmail.com> Signed-off-by: Kent Overstreet <koverstreet@google.com>
2013-05-10dm cache: set config valueJoe Thornber1-28/+31
Share configuration option processing code between the dm cache ctr and message functions. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm cache: move config fnsAlasdair G Kergon1-17/+17
Move process_config_option() in dm-cache-target.c to make the next patch more readable. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm thin: generate event when metadata threshold passedJoe Thornber3-0/+58
Generate a dm event when the amount of remaining thin pool metadata space falls below a certain level. The threshold is taken to be a quarter of the size of the metadata device with a minimum threshold of 4MB. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm persistent metadata: add space map threshold callbackJoe Thornber1-1/+76
Add a threshold callback to dm persistent data space maps. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm persistent data: add threshold callback to space mapJoe Thornber3-3/+29
Add a threshold callback function to the persistent data space map interface for a subsequent patch to use. dm-thin and dm-cache are interested in knowing when they're getting low on metadata or data blocks. This patch introduces a new method for registering a callback against a threshold. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm thin: detect metadata device resizingJoe Thornber3-3/+64
Allow the dm thin pool metadata device to be extended. Whenever a pool is resumed, detect whether the size of the metadata device has increased, and if so, extend the metadata to use the new space. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm persistent data: support space map resizingJoe Thornber1-6/+32
Support extending a dm persistent data metadata space map. The extend itself is implemented by switching back to the boostrap allocator and pointing to the new space. The extra bitmap indexes are then allocated from the new space, and finally we switch back to the proper space map ops and tweak the reference counts. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm thin: open dev read only when possibleJoe Thornber1-11/+14
If a thin pool is created in read-only-metadata mode then only open the metadata device read-only. Previously it was always opened with FMODE_READ | FMODE_WRITE. (Note that dm_get_device() still allows read-only dm devices to be used read-write at the moment: If I create a read-only linear device for the metadata, via dmsetup load --readonly, then I can still create a rw pool out of it.) Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm thin: refactor data dev resizeJoe Thornber2-33/+64
Refactor device size functions in preparation for similar metadata device resizing functions. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm cache: replace memcpy with struct assignmentJoe Thornber2-3/+3
Use struct assignment rather than memcpy in dm cache. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm cache: fix typos in commentsJoe Thornber1-3/+4
Fix up some typos in dm-cache comments. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm cache policy: fix description of lookup fnAlasdair G Kergon1-2/+2
Correct the documented requirement on the return code from dm cache policy lookup functions stated in the policy module header file. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm persistent data: fix error message typosJoe Thornber1-4/+4
Fix some typos in dm-space-map-metadata.c error messages. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm cache: tune migration throttlingJoe Thornber1-1/+2
Tune the dm cache migration throttling. i) Issue a tick every second, just in case there's no i/o going through. ii) Drop the migration threshold right down to something suitable for background work. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm mpath: enable WRITE SAME supportMike Snitzer1-0/+1
Enable WRITE SAME support in dm multipath. As far as multipath is concerned it is just another write request. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Tested-by: Bharata B Rao <bharata.rao@gmail.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm table: fix write same supportMike Snitzer1-1/+1
If device_not_write_same_capable() returns true then the iterate_devices loop in dm_table_supports_write_same() should return false. Reported-by: Bharata B Rao <bharata.rao@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # v3.8+ Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm bufio: avoid a possible __vmalloc deadlockMikulas Patocka1-1/+23
This patch uses memalloc_noio_save to avoid a possible deadlock in dm-bufio. (it could happen only with large block size, at most PAGE_SIZE << MAX_ORDER (typically 8MiB). __vmalloc doesn't fully respect gfp flags. The specified gfp flags are used for allocation of requested pages, structures vmap_area, vmap_block and vm_struct and the radix tree nodes. However, the kernel pagetables are allocated always with GFP_KERNEL. Thus the allocation of pagetables can recurse back to the I/O layer and cause a deadlock. This patch uses the function memalloc_noio_save to set per-process PF_MEMALLOC_NOIO flag and the function memalloc_noio_restore to restore it. When this flag is set, all allocations in the process are done with implied GFP_NOIO flag, thus the deadlock can't happen. This should be backported to stable kernels, but they don't have the PF_MEMALLOC_NOIO flag and memalloc_noio_save/memalloc_noio_restore functions. So, PF_MEMALLOC should be set and restored instead. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm snapshot: fix error return code in snapshot_ctrWei Yongjun1-0/+1
Return -ENOMEM instead of success if unable to allocate pending exception mempool in snapshot_ctr. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: stable@vger.kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm cache: fix error return code in cache_createWei Yongjun1-0/+1
Return -ENOMEM if memory allocation fails in cache_create instead of 0 (to avoid NULL pointer dereference). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: stable@vger.kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-10dm stripe: fix regression in stripe_width calculationMike Snitzer1-5/+6
Fix a regression in the calculation of the stripe_width in the dm stripe target which led to incorrect processing of device limits. The stripe_width is the stripe device length divided by the number of stripes. The group of commits in the range f14fa69 ("dm stripe: fix size test") to eb850de ("dm stripe: support for non power of 2 chunksize") interfered with each other (a merging error) and led to the stripe_width being set incorrectly to the stripe device length divided by chunk_size * stripe_count. For example, a stripe device's table with: 0 33553920 striped 3 512 ... should result in a stripe_width of 11184640 (33553920 / 3), but due to the bug it was getting set to 21845 (33553920 / (512 * 3)). The impact of this bug is that device topologies that previously worked fine with the stripe target are no longer considered valid. In particular, there is a higher risk of seeing this issue if one of the stripe devices has a 4K logical block size. Resulting in an error message like this: "device-mapper: table: 253:4: len=21845 not aligned to h/w logical block size 4096 of dm-1" The fix is to swap the order of the divisions and to use a temporary variable for the second one, so that width retains the intended value. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 3.6+ Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-05-08Merge branch 'for-3.10/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds29-0/+15775
Pull block driver updates from Jens Axboe: "It might look big in volume, but when categorized, not a lot of drivers are touched. The pull request contains: - mtip32xx fixes from Micron. - A slew of drbd updates, this time in a nicer series. - bcache, a flash/ssd caching framework from Kent. - Fixes for cciss" * 'for-3.10/drivers' of git://git.kernel.dk/linux-block: (66 commits) bcache: Use bd_link_disk_holder() bcache: Allocator cleanup/fixes cciss: bug fix to prevent cciss from loading in kdump crash kernel cciss: add cciss_allow_hpsa module parameter drivers/block/mg_disk.c: add CONFIG_PM_SLEEP to suspend/resume functions mtip32xx: Workaround for unaligned writes bcache: Make sure blocksize isn't smaller than device blocksize bcache: Fix merge_bvec_fn usage for when it modifies the bvm bcache: Correctly check against BIO_MAX_PAGES bcache: Hack around stuff that clones up to bi_max_vecs bcache: Set ra_pages based on backing device's ra_pages bcache: Take data offset from the bdev superblock. mtip32xx: mtip32xx: Disable TRIM support mtip32xx: fix a smatch warning bcache: Disable broken btree fuzz tester bcache: Fix a format string overflow bcache: Fix a minor memory leak on device teardown bcache: Documentation updates bcache: Use WARN_ONCE() instead of __WARN() bcache: Add missing #include <linux/prefetch.h> ...
2013-05-08Merge branch 'for-3.10/core' of git://git.kernel.dk/linux-blockLinus Torvalds11-202/+104
Pull block core updates from Jens Axboe: - Major bit is Kents prep work for immutable bio vecs. - Stable candidate fix for a scheduling-while-atomic in the queue bypass operation. - Fix for the hang on exceeded rq->datalen 32-bit unsigned when merging discard bios. - Tejuns changes to convert the writeback thread pool to the generic workqueue mechanism. - Runtime PM framework, SCSI patches exists on top of these in James' tree. - A few random fixes. * 'for-3.10/core' of git://git.kernel.dk/linux-block: (40 commits) relay: move remove_buf_file inside relay_close_buf partitions/efi.c: replace useless kzalloc's by kmalloc's fs/block_dev.c: fix iov_shorten() criteria in blkdev_aio_read() block: fix max discard sectors limit blkcg: fix "scheduling while atomic" in blk_queue_bypass_start Documentation: cfq-iosched: update documentation help for cfq tunables writeback: expose the bdi_wq workqueue writeback: replace custom worker pool implementation with unbound workqueue writeback: remove unused bdi_pending_list aoe: Fix unitialized var usage bio-integrity: Add explicit field for owner of bip_buf block: Add an explicit bio flag for bios that own their bvec block: Add bio_alloc_pages() block: Convert some code to bio_for_each_segment_all() block: Add bio_for_each_segment_all() bounce: Refactor __blk_queue_bounce to not use bi_io_vec raid1: use bio_copy_data() pktcdvd: Use bio_reset() in disabled code to kill bi_idx usage pktcdvd: use bio_copy_data() block: Add bio_copy_data() ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-31 21:38:44 +0000