summaryrefslogtreecommitdiff
path: root/drivers/leds
AgeCommit message (Collapse)AuthorFilesLines
2008-03-31leds: Remove incorrect use of preempt_count() from leds-gpioDavid Brownell1-6/+6
It appears that we can't just check to see if we're in a task context ... so instead of trying that, just make the relevant leds always schedule a little worklet. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-03-31leds: Fix potential leds-gpio oopsUwe Kleine-König1-4/+4
Call gpio_cansleep only after gpio_request succeeded avoiding an oops. Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-08PWM LED driverDavid Brownell3-0/+165
This is a LED driver using the PWM on newer SOCs from Atmel; brightness is controlled by changing the PWM duty cycle. So for example if you've set up two leds labeled "pwm0" and "pwm1": echo 0 > /sys/class/leds/pwm2/brightness # off (0%) echo 80 > /sys/class/leds/pwm2/brightness echo 255 > /sys/class/leds/pwm2/brightness # on (100%) Note that "brightness" here isn't linear; maybe that should change. Going from 4 to 8 probably doubles perceived brightness, while 244 to 248 is imperceptible. This is mostly intended to be a simple example of PWM, although it's realistic since LCD backlights are often driven with PWM to conserve battery power (and offer brightness options). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07leds: Add HP Jornada 6xx driverKristoffer Ericson3-0/+128
Add support for the LEDs on the HP Jornada 620/660/680/690 devices. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-07leds: Remove the now uneeded ixp4xx driverRod Whitby3-224/+0
All boards using the IXP4XX-GPIO-LED driver have been updated to use the generic leds-gpio driver instead. Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-07leds: Add power LED to the wrap driverMichael Loeffler1-6/+37
The 3rd LED on this board is something like a power-led, it is on all the time. With this change to the leds-wrap driver it is possible to use this LED too. Signed-off-by: Michael Loeffler <zvpunry@zvpunry.de> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-07leds: Fix led-gpio active_low default brightnessRaphael Assenat1-1/+1
When gpio_direction_output() is called, led_dat->active_low is used as default value. This means that the led will always be off by default. cdev.brightness should really have been set to LED_OFF unconditionally to reflect this behavior. Signed-off-by: Raphael Assenat <raph@8d.com> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-07leds: hw acceleration for Clevo mail LED driverMárton Németh2-3/+42
Add support for hardware accelerated LED blinking for the mail LED commonly found on Clevo notebooks. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-07leds: Add support for hardware accelerated LED flashingMárton Németh2-5/+42
Extends the leds subsystem with a blink_set() callback function which can be optionally implemented by a LED driver. If implemented, the driver can use the hardware acceleration for blinking a LED. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-07leds: Standardise LED naming schemeRichard Purdie8-19/+21
As discussed on LKML some notion of 'function' is needed in LED naming. This patch adds this to the documentation and standardises existing LED drivers. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-07leds: Add clevo notebook LED driverMárton Németh3-0/+207
The driver supports the mail LED commonly found on different Clevo notebooks. The driver access the LED through the i8042 hardware which is handled by the input subsystem. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2008-02-05leds: add possibility to remove leds classdevs during suspend/resumeRafael J. Wysocki1-4/+9
Make it possible to unregister a led classdev object in a safe way during a suspend/resume cycle. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Michael Buesch <mb@bu3sch.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-31leds: Fix locomo LED driver oopsRichard Purdie1-1/+1
Fix locomo-leds to use the correct struct device to prevent an oops. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-12-31leds: Fix leds_list_lock locking issuesRichard Purdie4-11/+12
Covert leds_list_lock to a rw_sempahore to match previous LED trigger locking fixes, fixing lock ordering. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-12-07leds: Fix led trigger locking bugsRichard Purdie2-27/+28
Convert part of the led trigger core from rw spinlocks to rw semaphores. We're calling functions which can sleep from invalid contexts otherwise. Fixes bug #9264. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-11-05leds: bugfixes for leds-gpioDavid Brownell1-9/+11
Three bugfixes to the leds-gpio driver, plus minor whitespace tweaks: - Do the INIT_WORK() before registering each LED, so if its trigger becomes immediately active it can schedule work without oopsing.. - Use normal registration, not platform_driver_probe(), so that devices appearing "late" (hotplug type) can still be bound. - Mark the driver remove code as "__devexit", preventing oopses when the underlying device is removed. These issues came up when using this driver with some GPIO expanders living on serial busses, which act unlike "normal" platform devices: they can appear and vanish along with the serial bus driver. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-10-20fix typo "sort" -> "short"Uwe Kleine-König1-1/+1
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds1-1/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (40 commits) kbuild: introduce ccflags-y, asflags-y and ldflags-y kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP kbuild: enable use of AFLAGS and CFLAGS on commandline kbuild: enable 'make AFLAGS=...' to add additional options to AS kbuild: fix AFLAGS use in h8300 and m68knommu kbuild: check for wrong use of CFLAGS kbuild: enable 'make CFLAGS=...' to add additional options to CC kbuild: fix up CFLAGS usage kbuild: make modpost detect unterminated device id lists kbuild: call export_report from the Makefile kbuild: move Kai Germaschewski to CREDITS kconfig/menuconfig: distinguish between selected-by-another options and comments kconfig: tristate choices with mixed tristate and boolean values include/linux/Kbuild: remove duplicate entries kbuild: kill backward compatibility checks kbuild: kill EXTRA_ARFLAGS kbuild: fix documentation in makefiles.txt kbuild: call make once for all targets when O=.. is used kbuild: pass -g to assembler under CONFIG_DEBUG_INFO kbuild: update _shipped files for kconfig syntax cleanup ... Fix up conflicts in arch/um/sys-{x86_64,i386}/Makefile manually.
2007-10-15[ARM] 4576/1: CM-X270 machine supportMike Rapoport3-0/+129
This patch provides core support for CM-X270 platform. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12kconfig: syntax cleanup - drop support for "depends/requires/def_boolean"Adrian Bunk1-1/+1
Remove the following redundant and never or rarely used kconfig syntax: - "def_boolean" (same as "def_bool") - "requires" (same as "depends on") - "depends" (same as "depends on") This patch contains the code changes and Kconfig updates. The shipped files are in next patch to let actual codechange stand out. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-11leds: Update Cobalt Qube series front LED supportYoichi Yuasa1-18/+77
Update Cobalt Qube series front LED support. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-10-11leds: Add Cobalt Raq series LEDs supportYoichi Yuasa3-0/+146
Add Cobalt Raq series LEDs support. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-10-11leds: Rename leds-cobalt driverYoichi Yuasa3-4/+4
The leds-cobalt driver only supports the Coable Qube series (not included in Cobalt Raq series). Rename the driver and update Kconfig/Makefile. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-07-16leds: Convert from struct class_device to struct deviceRichard Purdie5-63/+58
Convert the LEDs class from struct class_device to struct device since class_device is scheduled for removal. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-16leds: Add warning printks in error pathsRichard Purdie1-2/+9
Add warning printks if led_trigger_register_simple() fails. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-07-16leds: Fix trigger unregister_simple if register_simple failsRichard Purdie1-1/+2
Fix led_trigger_unregister_simple to handle the case where led_trigger_register_simple fails, avoiding a NULL pointer dereference. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-07-16leds: Use menuconfig objects II - LEDJan Engelhardt1-9/+5
Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-07-16leds: Teach leds-gpio to handle timer-unsafe GPIOsDavid Brownell1-1/+26
Teach the new leds-gpio driver that some GPIOs can't be accessed from timer callbacks ... which is how all today's standard triggers use them. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-07-16leds: Add generic GPIO LED driverRaphael Assenat3-0/+183
This patch adds support for GPIO connected leds via the new GPIO framework. Information about leds (gpio, polarity, name, default trigger) is passed to the driver via platform_data. Signed-off-by: Raphael Assenat <raph@8d.com> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-05-10[S390] Kconfig: menus with depends on HAS_IOMEM.Martin Schwidefsky1-0/+1
Add "depends on HAS_IOMEM" to a number of menus to make them disappear for s390 which does not have I/O memory. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-09fix file specification in commentsUwe Kleine-König1-1/+1
Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-02-15leds: Add support for Cobalt Server front LEDFlorian Fainelli3-0/+50
Add support for Cobalt Server front LED (MIPS) Signed-off-by: Florian Fainell <florian.fainelli@int-evry.fr> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-02-15leds: Add IPAQ h1940 LEDs supportArnaud Patard3-0/+170
This patch adds the support for the IPAQ h1940 leds. In order to create the amber led (used for the battery charging), the red and green leds are set to the same default trigger. Due to hardware limitations, the blue led can only be set in blinking mode. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-01-05[PATCH] Fix leds-s3c24xx hardware.h referenceRichard Purdie1-1/+1
Russell King recently reminded us that one shouldn't use asm/arch/hardware.h but one should use asm/hardware.h (http://lkml.org/lkml/2006/12/23/26). Unfortunately, the leds-s3c24xx driver is using the wrong header. This patch is fixing that. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-12kconfig: Standardize "depends" -> "depends on" in Kconfig filesRobert P. J. Day1-11/+11
Standardize the miniscule percentage of occurrences of "depends" in Kconfig files to "depends on", and update kconfig-language.txt to reflect that. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-12-07[PATCH] PCEngines WRAP LED SupportKristian Kielhofner3-0/+149
A driver for the PCEngines WRAP boards (http://www.pcengines.ch), which are very similar to the Soekris net4801 (same NS SC1100 geode reference design). The LEDs on the WRAP are on different GPIO lines and I have modified and copied the net48xx error led support for this. It also includes support for an "extra" led (in addition to error). The three LEDs on the WRAP are at GPIO lines 2,3,18 (WRAP LEDs from left to right). This driver gives access to the second and third LEDs by twiddling GPIO lines 3 & 18. Because these boards are so similar to the net48xx, I basically sed-ed that driver to form the basis for leds-wrap.c. The only changes from leds-net48xx.c are: - #define WRAP_EXTRA_LED_GPIO - name changes - duplicate relevant sections to provide support for the "extra" led - reverse the various *_led_set values. The WRAP is "backwards" from the net48xx, and these needed to be updated for that. [akpm@osdl.org: build fix] Signed-off-by: Kristian Kielhofner <kris@krisk.org> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-04[PATCH] severing module.h->sched.hAl Viro2-0/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-10-17[PATCH] drivers/led: handle sysfs errorsJeff Garzik2-7/+35
Signed-off-by: Jeff Garzik <jeff@garzik.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04Remove all inclusions of <linux/config.h>Dave Jones1-1/+0
kbuild explicitly includes this at build time. Signed-off-by: Dave Jones <davej@redhat.com>
2006-10-03kerneldoc-typo in led-class.cHenrik Kretzschmar1-1/+1
Fixes a typo in led-class.c kerneldoc. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03fix file specification in commentsUwe Zeisberger1-1/+1
Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-01[PATCH] leds: turn LED off when changing triggersPaul Collins1-0/+1
I was playing with LED triggers when I noticed that changing from heartbeat (or ide-disk) to "none" at the right moment would leave the LED stuck on. This is easy to reproduce by doing "find / >/dev/null" with the ide-disk trigger enabled and then switching to "none". Here is a patch that fixes the problem by explicitly turning the LED off after removing the existing trigger. Signed-off-by: Paul Collins <paul@ondioline.org> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29[PATCH] Make net48xx-led use scx200_gpio_opsChris Boot1-5/+4
Make the next48xx LED code use scx200_gpio_ops instead of raw SCx200 GPIO accesses. Signed-off-by: Chris Boot <bootc@bootc.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14[PATCH] net48xx LED cleanupsChris Boot1-3/+4
Add the DRVNAME define to remove the two separate references of the driver name by string, and move the .driver.owner into the existing .driver sub-structure. Signed-off-by: Chris Boot <bootc@bootc.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10[PATCH] LED Class support for Soekris net48xxChris Boot3-0/+123
Add LED Class device support for the Soekris net48xx Error LED. Tested only on a net4801, but should work on a net4826 as well. I'd love to find a way of detecting a Soekris net48xx device but there is no DMI or any Soekris-specific PCI devices. [akpm@osdl.org: fixlets, cleanups] Signed-off-by: Chris Boot <bootc@bootc.net> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel9-9/+0
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-27[PATCH] spin/rwlock init cleanupsIngo Molnar2-2/+2
locking init cleanups: - convert " = SPIN_LOCK_UNLOCKED" to spin_lock_init() or DEFINE_SPINLOCK() - convert rwlocks in a similar manner this patch was generated automatically. Motivation: - cleanliness - lockdep needs control of lock initialization, which the open-coded variants do not give - it's also useful for -rt and for lock debugging in general Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25[PATCH] LED: add LED heartbeat triggerAtsushi Nemoto3-0/+128
Add an LED trigger acts like a heart beat. This can be used as a replacement of CONFIG_HEARTBEAT code exists in some arch's timer code. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Richard Purdie <rpurdie@rpsys.net> Cc: "Nish Aravamudan" <nish.aravamudan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] leds: Amstrad Delta LED supportJonathan McDowell3-0/+169
Use the new LED infrastructure to support the 6 LEDs present on the Amstrad Delta. [akpm@osdl.org: cleanup] Signed-off-by: Jonathan McDowell <noodles@earth.li> Ackde-by: Richard Purdie <rpurdie@rpsys.net> Cc: Ben Dooks <ben@fluff.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-19[ARM] 3563/1: LED: Set the LOCOMO LED driver default triggersRichard Purdie1-0/+2
Patch from Richard Purdie Set the default triggers for the LOCOMO LED driver. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>