summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2013-01-04Merge branch 'for-linus' of ↵Linus Torvalds3-3/+25
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input update from Dmitry Torokhov: "Updates for the input subsystem. Just a couple of driver fixes this time." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: gpio_keys - defer probing if GPIO probing is deferred Input: gpio_keys_polled - defer probing if GPIO probing is deferred Input: sentelic - only report position of first finger as ST coordinates
2013-01-03Drivers: misc: remove __dev* attributes.Greg Kroah-Hartman1-1/+1
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-24Input: gpio_keys - defer probing if GPIO probing is deferredDmitry Torokhov1-1/+12
If of_get_gpio_flags() returns an error (as in case when GPIO probe is deferred) the driver would attempt to claim invalid GPIO. It should propagate the error code up the stack instead so that the probe either fails or will be retried later (in case of -EPROBE_DEFER). Cc: stable@vger.kernel.org Reported-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-24Input: gpio_keys_polled - defer probing if GPIO probing is deferredGabor Juhos1-1/+12
If GPIO probing is deferred, the driver tries to claim an invalid GPIO line which leads to an error message like this: gpio-keys-polled buttons.2: unable to claim gpio 4294966779, err=-22 gpio-keys-polled: probe of buttons.2 failed with error -22 We should make sure that error code returned by of_get_gpio_flags (including -EPROBE_DEFER) is propagated up the stack. Cc: stable@vger.kernel.org Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-24Input: sentelic - only report position of first finger as ST coordinatesChristophe TORDEUX1-1/+1
Report only the position of the first finger as absolute non-MT coordinates, instead of reporting both fingers alternatively. Actual MT events are unaffected. This fixes horizontal and improves vertical scrolling with the touchpad. Cc: stable@vger.kernel.org Signed-off-by: Christophe TORDEUX <christophe@tordeux.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-19Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull small x86 fixes from Peter Anvin: "A collection of very small fixes, mostly pure documentation." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, doc: Document that bootloader ID 4 is used also by iPXE x86, doc: Add a formal bootloader ID for kexec-tools x86, 8042: Enable A20 using KBC to fix S3 resume on some MSI laptops
2012-12-18Merge branch 'for-linus' of ↵Linus Torvalds164-1570/+2064
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull second round of input updates from Dmitry Torokhov: "As usual, there are a couple of new drivers, input core now supports managed input devices (devres), a slew of drivers now have device tree support and a bunch of fixes and cleanups." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (71 commits) Input: walkera0701 - fix crash on startup Input: matrix-keymap - provide a proper module license Input: gpio_keys_polled - switch to using gpio_request_one() Input: gpio_keys - switch to using gpio_request_one() Input: wacom - fix touch support for Bamboo Fun CTH-461 Input: xpad - add a few new VID/PID combinations Input: xpad - minor formatting fixes Input: gpio-keys-polled - honor 'autorepeat' setting in platform data Input: tca8418-keypad - switch to using managed resources Input: tca8418_keypad - increase severity of failures in probe() Input: tca8418_keypad - move device ID tables closer to where they are used Input: tca8418_keypad - use dev_get_platdata() to retrieve platform data Input: tca8418_keypad - use a temporary variable for parent device Input: tca8418_keypad - add support for shared interrupt Input: tca8418_keypad - add support for device tree bindings Input: remove Compaq iPAQ H3600 (Bitsy) touchscreen driver Input: bu21013_ts - add support for Device Tree booting Input: bu21013_ts - move GPIO init and exit functions into the driver Input: bu21013_ts - request regulator that actually exists ARM: ux500: Strip out duplicate touch screen platform information ...
2012-12-16Merge branch 'next' into for-linusDmitry Torokhov164-1556/+2064
Prepare first set of updates for 3.8 merge window.
2012-12-16Input: walkera0701 - fix crash on startupPeter Popovec1-3/+4
The driver's timer must be set up before enabling IRQ handler, otherwise bad things may happen. Reported-and-tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Peter Popovec <popovec@fei.tuke.sk> CC: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-16Merge tag 'mfd-3.8-1' of ↵Linus Torvalds6-546/+427
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFS update from Samuel Ortiz: "This is the MFD patch set for the 3.8 merge window. We have several new drivers, most of the time coming with their sub devices drivers: - Austria Microsystem's AS3711 - Nano River's viperboard - TI's TPS80031, AM335x TS/ADC, - Realtek's MMC/memstick card reader - Nokia's retu We also got some notable cleanups and improvements: - tps6586x got converted to IRQ domains. - tps65910 and tps65090 moved to the regmap IRQ API. - STMPE is now Device Tree aware. - A general twl6040 and twl-core cleanup, with moves to the regmap I/O and IRQ APIs and a conversion to the recently added PWM framework. - sta2x11 gained regmap support. Then the rest is mostly tiny cleanups and fixes, among which we have Mark's wm5xxx and wm8xxx patchset." Far amount of annoying but largely trivial conflicts. Many due to __devinit/exit removal, others due to one or two of the new drivers also having come in through another tree. * tag 'mfd-3.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (119 commits) mfd: tps6507x: Convert to devm_kzalloc mfd: stmpe: Update DT support for stmpe driver mfd: wm5102: Add readback of DSP status 3 register mfd: arizona: Log if we fail to create the primary IRQ domain mfd: tps80031: MFD_TPS80031 needs to select REGMAP_IRQ mfd: tps80031: Add terminating entry for tps80031_id_table mfd: sta2x11: Fix potential NULL pointer dereference in __sta2x11_mfd_mask() mfd: wm5102: Add tuning for revision B mfd: arizona: Defer patch initialistation until after first device boot mfd: tps65910: Fix wrong ack_base register mfd: tps65910: Remove unused data mfd: stmpe: Get rid of irq_invert_polarity mfd: ab8500-core: Fix invalid free of devm_ allocated data mfd: wm5102: Mark DSP memory regions as volatile mfd: wm5102: Correct default for LDO1_CONTROL_2 mfd: arizona: Register haptics devices mfd: wm8994: Make current device behaviour the default mfd: tps65090: MFD_TPS65090 needs to select REGMAP_IRQ mfd: Fix stmpe.c build when OF is not enabled mfd: jz4740-adc: Use devm_kzalloc ...
2012-12-16ARM: OMAP: Fix drivers to depend on omap for internal devicesTony Lindgren1-0/+1
These devices are not available on other architectures, so let's limit them to omap. If the driver subsystem maintainers want to build test system wide changes without building for each target, it's easy to carry a test patch that just strips out the depends entries from Kconfig files. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-13Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID subsystem updates from Jiri Kosina: 1) Support for HID over I2C bus has been added by Benjamin Tissoires. ACPI device discovery is still in the works. 2) Support for Win8 Multitiouch protocol is being added, most work done by Benjamin Tissoires as well 3) EIO/ERESTARTSYS is fixed in hiddev/hidraw, fixes by Andrew Duggan and Jiri Kosina 4) ION iCade driver added by Bastien Nocera 5) Support for a couple new Roccat devices has been added by Stefan Achatz 6) HID sensor hubs are now auto-detected instead of having to list all the VID/PID combinations in the blacklist array 7) other random fixes and support for new device IDs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (65 commits) HID: i2c-hid: add mutex protecting open/close race Revert "HID: sensors: add to special driver list" HID: sensors: autodetect USB HID sensor hubs HID: hidp: fallback to input session properly if hid is blacklisted HID: i2c-hid: fix ret_count check HID: i2c-hid: fix i2c_hid_get_raw_report count mismatches HID: i2c-hid: remove extra .irq field in struct i2c_hid HID: i2c-hid: reorder allocation/free of buffers HID: i2c-hid: fix memory corruption due to missing hid declaration HID: i2c-hid: remove superfluous include HID: i2c-hid: remove unneeded test in i2c_hid_remove HID: i2c-hid: i2c_hid_get_report may fail HID: i2c-hid: also call i2c_hid_free_buffers in i2c_hid_remove HID: i2c-hid: fix error messages HID: i2c-hid: fix return paths HID: i2c-hid: remove unused static declarations HID: i2c-hid: fix i2c_hid_dbg macro HID: i2c-hid: fix checkpatch.pl warning HID: i2c-hid: enhance Kconfig HID: i2c-hid: change I2C name ...
2012-12-13Merge tag 'sound-3.8' of ↵Linus Torvalds3-0/+266
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This update contains a fairly wide range of changes all over in sound subdirectory, mainly because of UAPI header moves by David and __dev* annotation removals by Bill. Other highlights are: - Introduced the support for wallclock timestamps in ALSA PCM core - Add the poll loop implementation for HD-audio jack detection - Yet more VGA-switcheroo fixes for HD-audio - New VIA HD-audio codec support - More fixes on resource management in USB audio and MIDI drivers - More quirks for USB-audio ASUS Xonar U3, Reloop Play, Focusrite, Roland VG-99, etc - Add support for FastTrack C400 usb-audio - Clean ups in many drivers regarding firmware loading - Add PSC724 Ultiimate Edge support to ice1712 - A few hdspm driver updates - New Stanton SCS.1d/1m FireWire driver - Standardisation of the logging in ASoC codes - DT and dmaengine support for ASoC Atmel - Support for Wolfson ADSP cores - New drivers for Freescale/iVeia P1022 and Maxim MAX98090 - Lots of other ASoC driver fixes and developments" Fix up trivial conflicts. And go out on a limb and assume the dts file 'status' field of one of the conflicting things was supposed to be "disabled", not "disable" like in pretty much all other cases. * tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits) ALSA: hda - Move runtime PM check to runtime_idle callback ALSA: hda - Add stereo-dmic fixup for Acer Aspire One 522 ALSA: hda - Avoid doubly suspend after vga switcheroo ALSA: usb-audio: Enable S/PDIF on the ASUS Xonar U3 ALSA: hda - Check validity of CORB/RIRB WP reads ALSA: hda - use usleep_range in link reset and change timeout check ALSA: HDA: VIA: Add support for codec VT1808. ALSA: HDA: VIA Add support for codec VT1705CF. ASoC: codecs: remove __dev* attributes ASoC: utils: remove __dev* attributes ASoC: ux500: remove __dev* attributes ASoC: txx9: remove __dev* attributes ASoC: tegra: remove __dev* attributes ASoC: spear: remove __dev* attributes ASoC: sh: remove __dev* attributes ASoC: s6000: remove __dev* attributes ASoC: OMAP: remove __dev* attributes ASoC: nuc900: remove __dev* attributes ASoC: mxs: remove __dev* attributes ASoC: kirkwood: remove __dev* attributes ...
2012-12-13Merge tag 'multiplatform' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform conversion patches from Olof Johansson: "Here are more patches in the progression towards multiplatform, sparse irq conversions in particular. Tegra has a handful of cleanups and general groundwork, but is not quite there yet on full enablement. Platforms that are enabled through this branch are VT8500 and Zynq. Note that i.MX was converted in one of the earlier cleanup branches as well (before we started a separate topic for multiplatform). And both new platforms for this merge window, sunxi and bcm, were merged with multiplatform support enabled." Fix up conflicts mostly as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits) ARM: zynq: Remove all unused mach headers ARM: zynq: add support for ARCH_MULTIPLATFORM ARM: zynq: make use of debug_ll_io_init() ARM: zynq: remove TTC early mapping ARM: tegra: move debug-macro.S to include/debug ARM: tegra: don't include iomap.h from debug-macro.S ARM: tegra: decouple uncompress.h and debug-macro.S ARM: tegra: simplify DEBUG_LL UART selection options ARM: tegra: select SPARSE_IRQ ARM: tegra: enhance timer.c to get IO address from device tree ARM: tegra: enhance timer.c to get IRQ info from device tree ARM: timer: fix checkpatch warnings ARM: tegra: add TWD to device tree ARM: tegra: define DT bindings for and instantiate RTC ARM: tegra: define DT bindings for and instantiate timer clocksource/mtu-nomadik: use apb_pclk clk: ux500: Register mtu apb_pclocks ARM: plat-nomadik: convert platforms to SPARSE_IRQ mfd/db8500-prcmu: use the irq_domain_add_simple() mfd/ab8500-core: use irq_domain_add_simple() ...
2012-12-12Merge tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+1
Pull ARM SoC Header cleanups from Olof Johansson: "This is a collection of header file cleanups, mostly for OMAP and AT91, that keeps moving the platforms in the direction of multiplatform by removing the need for mach-dependent header files used in drivers and other places." Fix up mostly trivial conflicts as per Olof. * tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (106 commits) ARM: OMAP2+: Move iommu/iovmm headers to platform_data ARM: OMAP2+: Make some definitions local ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h ARM: OMAP2+: Move iopgtable header to drivers/iommu/ ARM: OMAP: Merge iommu2.h into iommu.h atmel: move ATMEL_MAX_UART to platform_data/atmel.h ARM: OMAP: Remove omap_init_consistent_dma_size() arm: at91: move at91rm9200 rtc header in drivers/rtc arm: at91: move reset controller header to arm/arm/mach-at91 arm: at91: move pit define to the driver arm: at91: move at91_shdwc.h to arch/arm/mach-at91 arm: at91: move board header to arch/arm/mach-at91 arn: at91: move at91_tc.h to arch/arm/mach-at91 arm: at91 move at91_aic.h to arch/arm/mach-at91 arm: at91 move board.h to arch/arm/mach-at91 arm: at91: move platfarm_data to include/linux/platform_data/atmel.h arm: at91: drop machine defconfig ARM: OMAP: Remove NEED_MACH_GPIO_H ARM: OMAP: Remove unnecessary mach and plat includes ...
2012-12-11x86, 8042: Enable A20 using KBC to fix S3 resume on some MSI laptopsOndrej Zary1-0/+9
Some MSI laptop BIOSes are broken - INT 15h code uses port 92h to enable A20 line but resume code assumes that KBC was used. The laptop will not resume from S3 otherwise but powers off after a while and then powers on again stuck with a blank screen. Fix it by enabling A20 using KBC in i8042_platform_init for x86. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=12878 Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/201212112218.06551.linux@rainbow-software.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-12-10Input: matrix-keymap - provide proper module licenseFlorian Fainelli1-0/+3
The matrix-keymap module is currently lacking a proper module license, add one so we don't have this module tainting the entire kernel. This issue has been present since commit 1932811f426f ("Input: matrix-keymap - uninline and prepare for device tree support") Signed-off-by: Florian Fainelli <florian@openwrt.org> CC: stable@vger.kernel.org # v3.5+ Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-10Input: matrix-keymap - provide a proper module licenseFlorian Fainelli1-0/+3
The matrix-keymap module is currently lacking a proper module license, add one so we don't have this module tainting the entire kernel. This issue has been present since commit 1932811f (Input: matrix-keymap - uninline and prepare for device tree support) Signed-off-by: Florian Fainelli <florian@openwrt.org> CC: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-03Input: gpio_keys_polled - switch to using gpio_request_one()Dmitry Torokhov1-10/+2
This saves us a few lines of code. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-03Input: gpio_keys - switch to using gpio_request_one()Dmitry Torokhov1-9/+1
This saves us a few lines of code. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-03Input: wacom - fix touch support for Bamboo Fun CTH-461Diego Calleja1-1/+2
Commit f393ee2b814e3291c12565000210b3cf10aa5c1d forgot to add the touch_max property for Wacom Bamboo Fun CTH-461/S, ID 056a:00d2. This broke the touch functionality for that device. This patch, (done with help of Ping Cheng), adds the correct value and makes touch work again. Signed-off-by: Diego Calleja <diegocg@gmail.com> Reviewed-by: Ping Cheng <pinglinux@gmail.com> Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-03Input: xpad - add a few new VID/PID combinationsGuillermo A. Amaral1-9/+18
This adds VID/PID combinations for MadCatz, PDP and PowerA (new). Removed Pelican 'TSZ' Wired Xbox 360 Controller since it's clashing with Edge wireless Controller and I failed to confirm the PID. Signed-off-by: "Guillermo A. Amaral B." <g@maral.me> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-03Input: xpad - minor formatting fixesGuillermo A. Amaral1-3/+3
Fixed a few minor coding style issues in xpad driver. Signed-off-by: "Guillermo A. Amaral B." <g@maral.me> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-02Merge remote-tracking branch 'asoc/topic/arizona' into asoc-nextMark Brown3-0/+266
2012-11-29Input: gpio-keys-polled - honor 'autorepeat' setting in platform dataAlexander Shiyan1-1/+4
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29Input: tca8418-keypad - switch to using managed resourcesDmitry Torokhov1-53/+25
Let's switch to using devm_*() interfaces to manage our resources, thus will simplify error unwinding a bit. Reviewed-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29Input: tca8418_keypad - increase severity of failures in probe()Dmitry Torokhov1-3/+3
Failures to build a keymap, request an IRQ, or register input device are fatal for the driver, therefore the messages should have "error" severity instead of "debug". Reviewed-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29Input: tca8418_keypad - move device ID tables closer to where they are usedDmitry Torokhov1-15/+14
This matches structure of most other input drivers. Reviewed-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29Input: tca8418_keypad - use dev_get_platdata() to retrieve platform dataDmitry Torokhov1-1/+1
We need to use proper accessor functions instead of directly poking into various structures. Reviewed-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29Input: tca8418_keypad - use a temporary variable for parent deviceDmitry Torokhov1-10/+10
Use a temporary variable for our parent device (coming from I2C client structure); we'll be also using it during conversion to managed resources. Reviewed-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29Input: tca8418_keypad - add support for shared interruptAlban Bedel1-3/+7
Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29Input: tca8418_keypad - add support for device tree bindingsAlban Bedel1-27/+41
Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-28Input - arizona-haptics: Add driver haptics module on Arizona CODECsMark Brown3-0/+266
The Arizona CODECs contain a haptics module providing vibration feedback support. Implement basic support for this, providing simple start/stop and signal magnitude control. Since the output path for haptics is routed through the CODEC audio routing it is modelled as a signal generator within ASoC, the haptics driver calls DAPM to start and stop the output drivers. An appropriate output path must be configured via ALSA to connect the haptics source to the correct output. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-27Input: remove Compaq iPAQ H3600 (Bitsy) touchscreen driverAlexander Shiyan3-492/+0
The kernel does not contain the symbol SA1100_BITSY so the driver is never compiled and can be removed safely. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-27Input: bu21013_ts - add support for Device Tree bootingLee Jones1-4/+46
Now we can register the BU21013_ts touch screen when booting with Device Tree enabled. Here we parse all the necessary components previously expected to be passed from platform data. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-27Input: bu21013_ts - move GPIO init and exit functions into the driverLee Jones1-19/+50
These GPIO init and exit functions have no place in platform data, they should be part of the driver instead, Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-27Input: bu21013_ts - request regulator that actually existsLee Jones1-1/+1
Currently the BU21013 Touch Screen driver requests a regulator by the name of 'V-TOUCH', which doesn't exist anywhere in the kernel. The correct name, as referenced in platform regulator code is 'avdd'. Here, when we request a regulator, we use the correct name instead. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-27Input: gpio_keys - disable hardware on suspendJonas Aaberg1-5/+22
Disable hardware if active when suspending if the hw can not wake the system from suspend. [Dmitry Torokhov: use input_dev->users instead of a separate flag] Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Reviewed-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-27Input: gpio_keys - report initial state when opening the deviceDmitry Torokhov1-13/+26
Instead of reporting the initial stage when the device is registered we should do it when the device is opened (so there are users). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-27Input: samsung-keypad - switch to using managed resourcesSachin Kamat1-72/+31
devm_* functions are device managed and make error handling and code simpler. While at it also fix error exit paths. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-27Input: spear-keyboard - add clk_{un}prepare() supportVipul Kumar Samar1-0/+10
clk_{un}prepare is mandatory for platforms using common clock framework. Because for SPEAr we don't do anything in clk_{un}prepare() calls, just call them once in probe/remove. Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-25Input: imx_keypad - only set enabled columns to open-drainAndreas Pretzsch1-1/+2
In imx_keypad_inhibit(), all 8 columns were set to open-drain, in contrast to the rest of the driver, where only the enabled columns are modified/used. Contrary to the normal expectation, this also affects column I/Os not even mapped via IOMUX to the KPP hardware module but used as a GPIO. Therefore only init enabled columns to open-drain and leave all others with their default reset value of 0, i.e. totem-pole. Signed-off-by: Andreas Pretzsch <apr@cn-eng.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-25Input: HIL - do not call tasklet_disable right before tasklet_killXiaotian Feng1-2/+0
We do not need to call tasklet_disable() before calling tasklet_kill() if taskelt does not reschedult itself. Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: twl4030-pwrbutton - switch to using TWL_MODULE_PM_MASTER definePeter Ujfalusi1-2/+1
To facilitate upcoming cleanup in twl stack switch from using TWL4030_MODULE_PM_MASTER define to usingTWL_MODULE_PM_MASTER. There are no functional changes. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: stmpe-keypad - add support for Device Tree bindingsDmitry Torokhov1-9/+51
This patch allows the STMPE driver to be successfully probed and initialised when Device Tree support is enabled. Besides the usual platform data changes, we also separate the process of filling in the 'in use' pin bitmap, as we have to extract the information from Device Tree in the DT boot case. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devexitBill Pemberton141-149/+149
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devinitBill Pemberton138-237/+234
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devinitconstBill Pemberton4-4/+4
CONFIG_HOTPLUG is going away as an option so __devinitconst is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devinitdataBill Pemberton3-4/+4
CONFIG_HOTPLUG is going away as an option so __devinitdata is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devexit_pBill Pemberton141-142/+142
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 11:39:04 +0000