summaryrefslogtreecommitdiff
path: root/drivers/hwmon
AgeCommit message (Collapse)AuthorFilesLines
2013-03-18hwmon: (lm75.h) Update header inclusionJean Delvare1-1/+1
File lm75.h used to include <linux/hwmon.h> for SENSORS_LIMIT() but this function is gone by now. Instead we call clamp_val() so we should include <linux/kernel.h>, where this function is declared. Signed-off-by: Jean Delvare <khali@linux-fr.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2013-03-14hwmon: (pmbus/ltc2978) Fix temperature reportingGuenter Roeck1-6/+8
On LTC2978, only READ_TEMPERATURE is supported. It reports the internal junction temperature. This register is unpaged. On LTC3880, READ_TEMPERATURE and READ_TEMPERATURE2 are supported. READ_TEMPERATURE is paged and reports external temperatures. READ_TEMPERATURE2 is unpaged and reports the internal junction temperature. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org # 3.2+ Acked-by: Jean Delvare <khali@linux-fr.org>
2013-03-14hwmon: (pmbus) Fix krealloc() misuse in pmbus_add_attribute()David Woodhouse1-5/+7
If krealloc() returns NULL, it *doesn't* free the original. So any code of the form 'foo = krealloc(foo, …);' is almost certainly a bug. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-03-14hwmon: (lineage-pem) Add missing terminating entry for ↵Axel Lin1-0/+2
pem_[input|fan]_attributes Signed-off-by: Axel Lin <axel.lin@ingics.com> Cc: stable@vger.kernel.org Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-03-03hwmon: (sht15) Check return value of regulator_enable()Mark Brown1-1/+7
Not having power is a pretty serious error so check that we are able to enable the supply and error out if we can't. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org #3.8+; 3.0+ will need manual backport Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-03-03hwmon: (pmbus/ltc2978) Use detected chip ID to select supported functionalityGuenter Roeck1-1/+1
We read the chip ID from the chip, use it to determine if the chip ID provided to the driver is correct, and report it if wrong. We should also use the correct chip ID to select supported functionality. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org # 3.2+ Acked-by: Jean Delvare <khali@linux-fr.org>
2013-03-03hwmon: (pmbus/ltc2978) Fix peak attribute handlingGuenter Roeck1-13/+15
Peak attributes were not initialized and cleared correctly. Also, temp2_max is only supported on page 0 and thus does not need to be an array. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org # 3.2+ Acked-by: Jean Delvare <khali@linux-fr.org>
2013-02-20Merge tag 'pm+acpi-3.9-rc1' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: - Rework of the ACPI namespace scanning code from Rafael J. Wysocki with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg, Toshi Kani, and Yinghai Lu. - ACPI power resources handling and ACPI device PM update from Rafael J Wysocki. - ACPICA update to version 20130117 from Bob Moore and Lv Zheng with contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner. - Support for Intel Lynxpoint LPSS from Mika Westerberg. - cpuidle update from Len Brown including Intel Haswell support, C1 state for intel_idle, removal of global pm_idle. - cpuidle fixes and cleanups from Daniel Lezcano. - cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with contributions from Stratos Karafotis and Rickard Andersson. - Intel P-states driver for Sandy Bridge processors from Dirk Brandewie. - cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn. - cpufreq fixes related to ordering issues between acpi-cpufreq and powernow-k8 from Borislav Petkov and Matthew Garrett. - cpufreq support for Calxeda Highbank processors from Mark Langsdorf and Rob Herring. - cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update from Shawn Guo. - cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat, and Inderpal Singh. - Support for "lightweight suspend" from Zhang Rui. - Removal of the deprecated power trace API from Paul Gortmaker. - Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso, Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu, Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki Ishimatsu. * tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits) PM idle: remove global declaration of pm_idle unicore32 idle: delete stray pm_idle comment openrisc idle: delete pm_idle mn10300 idle: delete pm_idle microblaze idle: delete pm_idle m32r idle: delete pm_idle, and other dead idle code ia64 idle: delete pm_idle cris idle: delete idle and pm_idle ARM64 idle: delete pm_idle ARM idle: delete pm_idle blackfin idle: delete pm_idle sparc idle: rename pm_idle to sparc_idle sh idle: rename global pm_idle to static sh_idle x86 idle: rename global pm_idle to static x86_idle APM idle: register apm_cpu_idle via cpuidle cpufreq / intel_pstate: Add kernel command line option disable intel_pstate. cpufreq / intel_pstate: Change to disallow module build tools/power turbostat: display SMI count by default intel_idle: export both C1 and C1E ACPI / hotplug: Fix concurrency issues and memory leaks ...
2013-02-20Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds1-2/+2
Pull device tree changes from Grant Likely: "All around device tree changes destined for v3.8. Aside from the documentation updates the highlights in this branch include: - Kbuild changes for using CPP with .dts files - locking fix from preempt_rt patchset - include DT alias names in device uevent - Selftest bugfixes and improvements - New function for counting phandles stanzas in a property - constify argument to of_node_full_name() - Various bug fixes This tree did also contain a commit to use platform_device_add instead of open-coding the device add code, but it caused problems with amba devices and needed to be reverted." * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: (23 commits) Revert "of: use platform_device_add" kbuild: limit dtc+cpp include path gpio: Make of_count_named_gpios() use new of_count_phandle_with_args() of: Create function for counting number of phandles in a property of/base: Clean up exit paths for of_parse_phandle_with_args() of/selftest: Use selftest() macro throughout of/selftest: Fix GPIOs selftest to cover the 7th case of: fix recursive locking in of_get_next_available_child() documentation/devicetree: Fix a typo in exynos-dw-mshc.txt OF: convert devtree lock from rw_lock to raw spinlock of/exynos_g2d: Add Bindings for exynos G2D driver kbuild: create a rule to run the pre-processor on *.dts files input: Extend matrix-keypad device tree binding devicetree: Move NS2 LEDs binding into LEDs directory of: use platform_device_add powerpc/5200: Fix size to request_mem_region() call documentation/devicetree: Fix typos of: add 'const' to of_node_full_name parameter of: Output devicetree alias names in uevent DT: add vendor prefixes for Renesas and Toshiba ...
2013-02-19hwmon: (ntc_thermistor): Fix sparse warningsSachin Kamat1-2/+2
Fixes the following sparse warnings: drivers/hwmon/ntc_thermistor.c:46:31: warning: symbol 'ncpXXwb473' was not declared. Should it be static? drivers/hwmon/ntc_thermistor.c:82:31: warning: symbol 'ncpXXwl333' was not declared. Should it be static? Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-19hwmon: (adt7410) Add device table entry for the adt7420Lars-Peter Clausen2-3/+4
The adt7420 is software compatible to the adt7410. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-19hwmon: (adt7410) Use I2C_ADDRS helper macroLars-Peter Clausen1-5/+1
Use the I2C_ADDRS macro to initialize the I2C device's address_list. Doing so saves a few lines of boilerplate code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-19hwmon: (adt7410) Use the SIMPLE_DEV_PM_OPS helper macroLars-Peter Clausen1-4/+2
Use the SIMPLE_DEV_PM_OPS macro to declare the driver's pm_ops. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-19hwmon: (adt7410) Let suspend/resume depend on CONFIG_PM_SLEEPLars-Peter Clausen1-1/+1
Only build the suspend/resume code if CONFIG_PM_SLEEP is selected. Currently the code is built if CONFIG_PM is selected, but it will also be selected if only runtime PM support is built into the kernel. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-19hwmon: (adt7410) Clear unwanted bits in the config registerLars-Peter Clausen1-0/+1
Make sure to clear the mode bits from the config register before setting the new mode. Otherwise we might end up with a different mode than we want to. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-13gpio: Make of_count_named_gpios() use new of_count_phandle_with_args()Grant Likely1-2/+2
This patch replaces the horribly coded of_count_named_gpios() with a call to of_count_phandle_with_args() which is far more efficient. This also changes the return value of of_gpio_count() & of_gpio_named_count() from 'unsigned int' to 'int' so that it can return an error code. All the users of that function are fixed up to correctly handle a negative return value. v2: Split GPIO portion into a separate patch Tested-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com>
2013-02-06hwmon: (jc42) Add support for MCP98244Guenter Roeck2-2/+6
Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <khali@linux-fr.org>
2013-02-06hwmon: (pmbus) Clean up for code size reductionGuenter Roeck1-48/+38
Rearranged some data structures, and merged some common functions. Overall code and data size reduction by more than 900 bytes. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06hwmon: (pmbus/max34440) Add support for MAX34460 and MAX34461Guenter Roeck2-3/+74
MAX34460 is a PMBus 12-Channel Voltage Monitor & Sequencer. MAX34461 is a PMBus 16-Channel Voltage Monitor & Sequencer. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06hwmon: (pmbus) Add support for word status registerGuenter Roeck1-28/+52
Not all PMBus devices support the byte status register at 0x78. Try to use the word status register at 0x79 instead if that is the case. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06hwmon: (pmbus/zl6100) Add support for VMON/VDRVGuenter Roeck1-8/+168
Some of the ZL6100 compatible chips support monitoring a separate voltage pin, VMON (ZL2004) or VDRV (ZL91xx). Report it as in2 / vmon. The chips support implicit warning limits for VMON/VDRV, as percentage of the respective critical voltage. Support by reading/writing the critical voltages and calculating the associated warning voltages. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06hwmon: (pmbus) Add function to clear sensor cacheGuenter Roeck2-0/+9
For PMBus chips, modifying one limit register may affect other limits. Since limits are all cached in the PMBus core driver, related changes are not reflected in reported limits. Introduce function to clear the attribute cache. After calling this function, the core pmbus driver re-reads all cached values. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06hwmon: (pmbus) Add support for additional voltage sensorGuenter Roeck2-9/+55
Some PMBus chips support monitoring an additional non-standard voltage. While this voltage can in many cases be supported by simulating an additional sensor page, this does not work in all cases. Specifically, it is problematic if the data format is linear and the voltage is reported in LINEAR11 format. Since output voltages use LINEAR16, and the exponent for LINEAR16 data is chip-wide and fixed, this can result in overflows. To solve this problem, add support for an additional virtual input voltage, call it 'vmon', and treat this voltage as input voltage (which, when the chip supports linear data format, uses LINEAR11). Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06hwmon: (pmbus) Use krealloc to allocate attribute memoryGuenter Roeck1-109/+31
So far, attribute memory was allocated by pre-calculating the maximum possible amount of attributes. Not only does this waste memory, it is also risky because the calculation might be wrong. It also requires a lot of defines to specify the maximum number of attributes per class. Allocate attribute memory using krealloc() instead. That means we have to use kfree(), since devm_krealloc() does not exist, but that is still less costly and less risky than trying to predict the number of attributes at the beginning. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06hwmon: (pmbus) Simplify memory allocation for sensor attributesGuenter Roeck1-34/+29
Since memory is now allocated with dev_ functions, we no longer need to keep track of allocated memory. Sensor memory allocation can therefore be simplified significantly. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06hwmon: (pmbus) Improve boolean handlingGuenter Roeck1-87/+74
Boolean handling depends on storing the sensor data index in sensor_device_attr as part of the index variable. This limits the number of sensor attributes to 256, and means the sensor sequence number actually has to be maintained to be able to access sensor data from boolean functions. Rework the code to store sensor pointers in the pmbus_boolean data structure directly. With this approach, the number of supportable sensors is now unlimited. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06hwmon: (pmbus) Simplify memory allocation for labels and booleansGuenter Roeck1-116/+149
Since memory is now allocated with dev_ functions, we no longer need to keep track of allocated memory. Memory allocation for booleans and labels can therefore be simplified substantially by allocating it only as needed. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06hwmon: (pmbus) Use dev variable to represent client->devGuenter Roeck1-19/+18
This simplifies the code and makes it a bit smaller. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06hwmon: (pmbus) Fix 'Macros with multiple statements' checkpatch errorGuenter Roeck1-33/+43
Fix: ERROR: Macros with multiple statements should be enclosed in a do - while loop by unwinding the problematic macros. As a side effect, this patch reduces code size on x86_64 by 160 bytes and bss size by 64 bytes. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06hwmon: (pmbus) Drop unnecessary error messages in probe error pathGuenter Roeck1-18/+6
Drop error messages due to implementation errors and due to memory allocation errors. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06hwmon: Driver for Texas Instruments INA209Guenter Roeck3-0/+647
Add support for the TI / Burr-Brown INA209 voltage / current / power monitor. Cc: Paul Hays <haysp@magma.net> Cc: Ira W. Snyder <iws@ovro.caltech.edu> Tested-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06hwmon: (lm73) Add support for max/min alarmsChris Verges1-0/+32
Add support for temp1_min_alarm and temp1_max_alarm Signed-off-by: Chris Verges <kg4ysn@gmail.com> [linux@roeck-us.net: cleanup; dropped platform data and interrupt support] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06hwmon: (lm73) Add 'update_interval' attributeChris Verges1-11/+86
The LM73 supports four A/D conversion resolutions. The default used by the existing lm73 driver is the chip's default, 11-bit (0.25 C/LSB). This patch enables changing of this resolution from userspace via the update_interval sysfs attribute. Full details on usage are included in Documentation/hwmon/lm73. Signed-off-by: Chris Verges <kg4ysn@gmail.com> [linux@roeck-us.net: cleanup] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06hwmon: (lm73) Fix lower and upper temperature limitsGuenter Roeck1-4/+3
While the LM73 is only specified for temperatures from -40 to +150 degrees C, its power-up minimum and maximum temperature limits are -256 and +255.75 degrees C. For better consistency and to avoid confusion, clamp limits to the power-up limits and not to -40 / +150 degrees C. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06hwmon: (it87) Add support for IT8771E and IT8772EGuenter Roeck2-5/+37
Assume that IT8771E and IT8772E are fully compatible with IT8728F. IT8771E support contributed by Kelly Anderson. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <khali@linux-fr.org>
2013-02-06hwmon: Driver for Maxim MAX6697 and compatiblesGuenter Roeck3-0/+738
Add support for MAX6581, MAX6602, MAX6622, MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 temperature sensors Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Jean Delvare <khali@linux-fr.org>
2013-02-06hwmon: (sht15) check GPIO directionsVivien Didelot1-47/+88
Without this patch, the SHT15 driver may fail silently with a non-bidirectional data line and/or an input-only clock line. This patch checks the return value of gpio_direction_* function calls and returns the error code (if any) to the caller. If an error occurs in the read work function (work_funct_t), we wake the queue up directly without updating the data->state flag, to notice the waiter of the I/O error. The patch also makes minor cleanups: s/error_ret/unlock for some labels and uses devm_gpio_request_one() for the clock line. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-01-25hwmon: (coretemp) Document and add support for additional CPU modelsGuenter Roeck1-2/+3
Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-01-25hwmon: Replace SENSORS_LIMIT with clamp_valGuenter Roeck57-319/+297
SENSORS_LIMIT and the generic clamp_val have the same functionality, and clamp_val is more efficient. This patch reduces text size by 9052 bytes and bss size by 11624 bytes for x86_64 builds. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: George Joseph <george.joseph@fairview5.com> Acked-by: Jean Delvare <khali@linux-fr.org>
2013-01-25hwmon: (sht15) avoid CamelCaseVivien Didelot1-11/+11
This patch renames the supply_uV* variables to supply_uv* to avoid CamelCase as warned by the checkpatch.pl script. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-01-26ACPI: Remove useless type argument of driver .remove() operationRafael J. Wysocki2-3/+3
The second argument of ACPI driver .remove() operation is only used by the ACPI processor driver and the value passed to that driver through it is always available from the given struct acpi_device object's removal_type field. For this reason, the second ACPI driver .remove() argument is in fact useless, so drop it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2013-01-09hwmon: (vexpress) Fix build error seen if CONFIG_OF_DEVICE is not setGuenter Roeck1-0/+1
Fix: vexpress.c: In function ‘vexpress_hwmon_name_show’: vexpress.c:34:2: error: implicit declaration of function ‘of_get_property’ [-Werror=implicit-function-declaration] vexpress.c:34:27: warning: initialization makes pointer from integer without a cast [enabled by default] vexpress.c: In function ‘vexpress_hwmon_label_show’: vexpress.c:43:22: warning: initialization makes pointer from integer without a cast [enabled by default] Seen if CONFIG_OF_DEVICE is not defined. of_get_property is declared in of.h which is only included by of_device.h if CONFIG_OF_DEVICE is defined. of.h needs to be included directly. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-01-03Drivers: misc: remove __dev* attributes.Greg Kroah-Hartman1-2/+2
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-22hwmon: (emc6w201) Fix DIV_ROUND_CLOSEST problem with unsigned divisorsGuenter Roeck1-1/+1
Result of DIV_ROUND_CLOSEST is undefined for negative dividends if the divisor variable type is unsigned. Fix by declaring divisor as signed variable. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org>
2012-12-21hwmon: (lm73} Detect and report i2c bus errorsChris Verges1-5/+11
If an LM73 device does not exist on an I2C bus, attempts to communicate with the device result in an error code returned from the i2c read/write functions. The current lm73 driver casts that return value from a s32 type to a s16 type, then converts it to a temperature in celsius. Because negative temperatures are valid, it is difficult to distinguish between an error code printed to the response buffer and a negative temperature recorded by the sensor. The solution is to evaluate the return value from the i2c functions before performing any temperature calculations. If the i2c function did not succeed, the error code should be passed back through the virtual file system layer instead of being printed into the response buffer. Before: $ cat /sys/class/hwmon/hwmon0/device/temp1_input -46 After: $ cat /sys/class/hwmon/hwmon0/device/temp1_input cat: read error: No such device or address Signed-off-by: Chris Verges <kg4ysn@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-12-19hwmon-vid: Add support for AMD family 11h to 15h processorsJean Delvare1-0/+10
Since family 11h processors, AMD is exclusively using 7-bit VID codes transmitted using a serial protocol over two pins (clock and data.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: David Hubbard <david.c.hubbard@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
2012-12-19hwmon: (it87) Support PECI for additional chipsGuenter Roeck1-10/+38
Extend support for reporting and selecting PECI temperature sensors to IT8718, IT8720, IT8782, and IT8783. For IT8721, report the sensor type for temp2 as Intel PECI (6) if the chip is configured to report the PCH temperature. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-12-19hwmon: (it87) Report thermal sensor type as Intel PECI if appropriateGuenter Roeck1-3/+17
IT8721 and IT8728 support Intel PECI temperature reporting. Each sensor can be programmed to display the temperature reported on the PECI interface. If configured for Intel PECI, the driver reported the wrong sensor type for the respective thermal sensor. Fix the code to correctly report it as "Intel PECI (6)". Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-12-19hwmon: (it87) Manage device specific features with tableGuenter Roeck1-74/+81
This simplifies the code, improves runtime performance, reduces code size (about 280 bytes on x86_64), and makes it easier to add support for new devices. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-12-19hwmon: (it87) Replace pwm group macro with direct attribute definitionsGuenter Roeck1-41/+74
Fix checkpatch error: ERROR: Macros with multiple statements should be enclosed in a do - while loop Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 07:51:04 +0000