summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2013-04-12drm/fb-helper: Fix locking in drm_fb_helper_hotplug_eventDaniel Vetter1-3/+5
Driver's and ->fill_modes functions are allowed to grab crtc mutexes (for e.g. load detect). Hence we need to first only grab the general kms mutex, and only in a second step grab all locks to do the modesets. This prevents a deadlock on my gm45 in the tv load detect code called by drm_helper_probe_single_connector_modes. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-04-12udl: handle EDID failure properly.Dave Airlie1-0/+4
Don't oops seems proper. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-04-10drm/mgag200: Index 24 in extended CRTC registers is 24 in hex, not decimal.Christopher Harvey1-10/+3
This change properly enables the "requester" in G200ER cards that is responsible for getting pixels out of memory and clocking them out to the screen. Signed-off-by: Christopher Harvey <charvey@matrox.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-04-09Merge branch 'drm-nouveau-fixes-3.9' of ↵Dave Airlie1-1/+1
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes too many semicolons. * 'drm-nouveau-fixes-3.9' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: fix unconditional return waiting on memory
2013-04-09drm/nouveau: fix unconditional return waiting on memoryCalvin Owens1-1/+1
Typo in nv50_display_flip_wait allows page flipping to run ahead before memory has time to settle. Signed-off-by: Calvin Owens <jcalvinowens@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-04-05Merge tag 'pci-v3.9-fixes-1' of ↵Linus Torvalds2-0/+43
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "PCI updates for v3.9: ASPM Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus" kexec PCI: Don't try to disable Bus Master on disconnected PCI devices Platform ROM images PCI: Add PCI ROM helper for platform-provided ROM images nouveau: Attempt to use platform-provided ROM image radeon: Attempt to use platform-provided ROM image Hotplug PCI/ACPI: Always resume devices on ACPI wakeup notifications PCI/PM: Disable runtime PM of PCIe ports EISA EISA/PCI: Fix bus res reference EISA/PCI: Init EISA early, before PNP" * tag 'pci-v3.9-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/PM: Disable runtime PM of PCIe ports PCI/ACPI: Always resume devices on ACPI wakeup notifications PCI: Don't try to disable Bus Master on disconnected PCI devices Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus" radeon: Attempt to use platform-provided ROM image nouveau: Attempt to use platform-provided ROM image EISA/PCI: Init EISA early, before PNP EISA/PCI: Fix bus res reference PCI: Add PCI ROM helper for platform-provided ROM images
2013-04-03drm: correctly restore mappings if drm_open failsIlija Hadzic1-2/+4
If first drm_open fails, the error-handling path will incorrectly restore inode's mapping to NULL. This can cause the crash later on. Fix by separately storing away mapping pointers that drm_open can touch and restore each from its own respective variable if the call fails. Fixes: https://bugzilla.novell.com/show_bug.cgi?id=807850 (thanks to Michal Hocko for investigating investigating and finding the root cause of the bug) Reference: http://lists.freedesktop.org/archives/dri-devel/2013-March/036564.html v2: Use one variable to store file and inode mapping since they are the same at the function entry. Fix spelling mistakes in commit message. v3: Add reference to the original bug report. Reported-by: Marco Munderloh <munderl@tnt.uni-hannover.de> Tested-by: Marco Munderloh <munderl@tnt.uni-hannover.de> Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-04-03Merge branch 'drm-nouveau-fixes-3.9' of ↵Dave Airlie3-21/+31
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next Oops fixers. * 'drm-nouveau-fixes-3.9' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: fix NULL ptr dereference from nv50_disp_intr() drm/nouveau: fix handling empty channel list in ioctl's
2013-04-03Merge branch 'drm-intel-fixes' of ↵Dave Airlie4-26/+21
git://people.freedesktop.org/~danvet/drm-intel into drm-next One locking regression fix, and a couple of other i915 ones. * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm: don't unlock in the addfb error paths drm/i915: Fix build failure drm/i915: Be sure to turn hsync/vsync back on at crt enable (v2) drm/i915: duct-tape locking when eDP init fails
2013-04-01radeon: Attempt to use platform-provided ROM imageMatthew Garrett1-0/+26
Some platforms only provide their PCI ROM via a platform-specific interface. Fall back to attempting that if all other sources fail. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-01nouveau: Attempt to use platform-provided ROM imageMatthew Garrett1-0/+17
Some platforms only provide their PCI ROM via a platform-specific interface. Fall back to attempting that if all other sources fail. Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-03-29drm/nouveau: fix NULL ptr dereference from nv50_disp_intr()Maarten Lankhorst2-13/+21
Op 23-03-13 12:47, Peter Hurley schreef: > On Tue, 2013-03-19 at 11:13 -0400, Peter Hurley wrote: >> On vanilla 3.9.0-rc3, I get this 100% repeatable oops after login when >> the user X session is coming up: > Perhaps I wasn't clear that this happens on every boot and is a > regression from 3.8 > > I'd be happy to help resolve this but time is of the essence; it would > be a shame to have to revert all of this for 3.9 Well it broke on my system too, so it was easy to fix. I didn't even need gdm to trigger it! >8---- This fixes regression caused by 1d7c71a3e2f7 (drm/nouveau/disp: port vblank handling to event interface), which causes a oops in the following way: BUG: unable to handle kernel NULL pointer dereference at 0000000000000001 IP: [<0000000000000001>] 0x0 PGD 0 Oops: 0010 [#1] PREEMPT SMP Modules linked in: ip6table_filter ip6_tables ebtable_nat ebtables ...<snip>... CPU 3 Pid: 0, comm: swapper/3 Not tainted 3.9.0-rc3-xeon #rc3 Dell Inc. Precision WorkStation T5400 /0RW203 RIP: 0010:[<0000000000000001>] [<0000000000000001>] 0x0 RSP: 0018:ffff8802afcc3d80 EFLAGS: 00010087 RAX: ffff88029f6e5808 RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000096 RSI: 0000000000000001 RDI: ffff88029f6e5808 RBP: ffff8802afcc3dc8 R08: 0000000000000000 R09: 0000000000000004 R10: 000000000000002c R11: ffff88029e559a98 R12: ffff8802a376cb78 R13: ffff88029f6e57e0 R14: ffff88029f6e57f8 R15: ffff88029f6e5808 FS: 0000000000000000(0000) GS:ffff8802afcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000001 CR3: 000000029fa67000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper/3 (pid: 0, threadinfo ffff8802a355e000, task ffff8802a3535c40) Stack: ffffffffa0159d8a 0000000000000082 ffff88029f6e5820 0000000000000001 ffff88029f71aa00 0000000000000000 0000000000000000 0000000004000000 0000000004000000 ffff8802afcc3e38 ffffffffa01843b5 ffff8802afcc3df8 Call Trace: <IRQ> [<ffffffffa0159d8a>] ? nouveau_event_trigger+0xaa/0xe0 [nouveau] [<ffffffffa01843b5>] nv50_disp_intr+0xc5/0x200 [nouveau] [<ffffffff816fbacc>] ? _raw_spin_unlock_irqrestore+0x2c/0x50 [<ffffffff816ff98d>] ? notifier_call_chain+0x4d/0x70 [<ffffffffa017a105>] nouveau_mc_intr+0xb5/0x110 [nouveau] [<ffffffffa01d45ff>] nouveau_irq_handler+0x6f/0x80 [nouveau] [<ffffffff810eec95>] handle_irq_event_percpu+0x75/0x260 [<ffffffff810eeec8>] handle_irq_event+0x48/0x70 [<ffffffff810f205a>] handle_fasteoi_irq+0x5a/0x100 [<ffffffff810182f2>] handle_irq+0x22/0x40 [<ffffffff8170561a>] do_IRQ+0x5a/0xd0 [<ffffffff816fc2ad>] common_interrupt+0x6d/0x6d <EOI> [<ffffffff810449b6>] ? native_safe_halt+0x6/0x10 [<ffffffff8101ea1d>] default_idle+0x3d/0x170 [<ffffffff8101f736>] cpu_idle+0x116/0x130 [<ffffffff816e2a06>] start_secondary+0x251/0x258 Code: Bad RIP value. RIP [<0000000000000001>] 0x0 RSP <ffff8802afcc3d80> CR2: 0000000000000001 ---[ end trace 907323cb8ce6f301 ]--- Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-29drm/nouveau: fix handling empty channel list in ioctl'sMaarten Lankhorst1-8/+10
If there are no channels, chan would never end up being NULL, and so the null pointer check would fail. Solve this by initializing chan to NULL, and iterating over temp instead. Fixes oops when running intel-gpu-tools/tests/kms_flip, which attempts to do some intel ioctl's on a nouveau device. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: stable@vger.kernel.org [3.7+] Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-27drm: don't unlock in the addfb error pathsDaniel Vetter1-2/+0
We don't grab the modeset locks any more since commit 468174f748603497e73dba9b5c6d1d9f71121486 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Dec 11 00:09:12 2012 +0100 drm: push modeset_lock_all into ->fb_create driver callbacks Reported-by: Ray Strode <rstrode@redhat.com> Cc: Ray Strode <rstrode@redhat.com> Cc: Dave Airlie <airlied@gmail.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-27drm/i915: Fix build failureLauri Kasanen1-1/+1
ERROR: "__build_bug_on_failed" [drivers/gpu/drm/i915/i915.ko] undefined! Originally reported at http://www.gossamer-threads.com/lists/linux/kernel/1631803 FDO bug #62775 This needs to be backported to both 3.7 and 3.8 stable trees. Doesn't apply straight, but it's a quick change. Signed-off-by: Lauri Kasanen <cand@gmx.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62775 Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-26drm/i915: Be sure to turn hsync/vsync back on at crt enable (v2)Adam Jackson1-23/+17
commit f40ebd6bcbbd0d30591f42dc16be52b5086a366b Author: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Date: Tue Mar 5 14:24:48 2013 +0100 drm/i915: Turn off hsync and vsync on ADPA when disabling crt properly disabled the hsync/vsync logic at disable time, but neglected to re-enable them at enable time. v2: In the enable hook, restore the connector's expected DPMS level instead of forcing ON. Do this by stashing a back pointer to the connector in the crt (suggested by danvet) since otherwise it's awkward to look up. Signed-off-by: Adam Jackson <ajax@redhat.com> Cc: stable@vger.kernel.org [danvet: Added more verbose commit citation and cc: stable tag. Also, make it compile. Then self-lart and try to assign the right pointer.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-26drm/i915: duct-tape locking when eDP init failsDaniel Vetter1-0/+3
Thanks to apple gpu mux fail we detect an eDP output, but can't read anything over dp aux. In the resulting failure path we then hit a paranoid WARN about potential locking. Since the WARN is pretty useful for normal operation just paper over it in the failure case by grabbing the demanded (but for init/teardown not really required) lock. I've checked our driver unload code and we already don't hold the kms lock when calling drm_mode_config_cleanup. So this won't lead to a new deadlock when reloading i915.ko. v2: Make it compile. Reported-by: Dave Airlie <airlied@gmail.com> Cc: Dave Airlie <airlied@gmail.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-25Merge branch 'drm-intel-fixes' of ↵Dave Airlie5-13/+19
git://people.freedesktop.org/~danvet/drm-intel into HEAD Daniel writes: "Just three revert/disable by default patches, one of them cc: stable (since the offending commit was cc: stable, too)." * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: Revert "drm/i915: write backlight harder" drm/i915: don't disable the power well yet Revert "drm/i915: set TRANSCODER_EDP even earlier"
2013-03-25Merge branch 'exynos-drm-fixes' of ↵Dave Airlie6-60/+365
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into HEAD Inki writes: Includes bug fixes and code cleanups. And it considers some restrictions to G2D hardware. With this, the malfunction and page fault issues to g2d driver would be fixed. * 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: Check g2d cmd list for g2d restrictions drm/exynos: Add a new function to get gem buffer size drm/exynos: Deal with g2d buffer info more efficiently drm/exynos: Clean up some G2D codes for readability drm/exynos: Fix G2D core malfunctioning issue drm/exynos: clear node object type at gem unmap drm/exynos: Fix error routine to getting dma addr. drm/exynos: Replaced kzalloc & memcpy with kmemdup drm/exynos: fimd: calculate the correct address offset drm/exynos: Make mixer_check_timing static drm/exynos: modify the compatible string for exynos fimd
2013-03-24Revert "drm/i915: write backlight harder"Daniel Vetter1-8/+5
This reverts commit cf0a6584aa6d382f802f2c3cacac23ccbccde0cd. Turns out that cargo-culting breaks systems. Note that we can't revert further, since commit 770c12312ad617172b1a65b911d3e6564fc5aca8 Author: Takashi Iwai <tiwai@suse.de> Date: Sat Aug 11 08:56:42 2012 +0200 drm/i915: Fix blank panel at reopening lid fixed a regression in 3.6-rc kernels for which we've never figured out the exact root cause. But some further inspection of the backlight code reveals that it's seriously lacking locking. And especially the asle backlight update is know to get fired (through some smm magic) when writing specific backlight control registers. So the possibility of suffering from races is rather real. Until those races are fixed I don't think it makes sense to try further hacks. Which sucks a bit, but sometimes that's how it is :( References: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg18788.html Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47941 Tested-by: Takashi Iwai <tiwai@suse.de> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: stable@vger.kernel.org (the reverted commit was cc: stable, too) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-24drm/i915: don't disable the power well yetPaulo Zanoni3-0/+9
We're still not 100% ready to disable the power well, so don't disable it for now. When we disable it we break the audio driver (because some of the audio registers are on the power well) and machines with eDP on port D (because it doesn't use TRANSCODER_EDP). Also, instead of just reverting the code, add a Kernel option to let us disable it if we want. This will allow us to keep developing and testing the feature while it's not enabled. This fixes problems caused by the following commit: commit d6dd9eb1d96d2b7345fe4664066c2b7ed86da898 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Jan 29 16:35:20 2013 -0200 drm/i915: dynamic Haswell display power well support References: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg18788.html Cc: Takashi Iwai <tiwai@suse.de> Cc: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-24Revert "drm/i915: set TRANSCODER_EDP even earlier"Daniel Vetter1-5/+5
This reverts commit cc464b2a17c59adedbdc02cc54341d630354edc3. The reason is that Takashi Iwai reported a regression bisected to this commit: http://www.mail-archive.com/intel-gfx@lists.freedesktop.org/msg18788.html His machine has eDP on port D (usual desktop all-in-on setup), which intel_dp.c identifies as an eDP panel, but the hsw ddi code mishandles. Closer inspection of the code reveals that haswell_crtc_mode_set also checks intel_encoder_is_pch_edp when setting is_cpu_edp. On haswell that doesn't make much sense (since there's no edp on the pch), but what this function _really_ checks is whether that edp connector is on port A or port D. It's just that on ilk-ivb port D was on the pch ... So that explains why this seemingly innocent change killed eDP on port D. Furthermore it looks like everything else accidentally works, since we've never enabled eDP on port D support for hsw intentionally (e.g. we still register the HDMI output for port D in that case). But in retrospective I also don't like that this leaks highly platform specific details into common code, and the reason is that the drm vblank layer sucks. So instead I think we should: - move the cpu_transcoder into the dynamic pipe_config tracking (once that's merged). - fix up the drm vblank layer to finally deal with kms crtc objects instead of int pipes. v2: Pimp commit message with the better diagnosis as discussed with Paulo on irc. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-23KMS: fix EDID detailed timing frame rateTorsten Duwe1-0/+1
When KMS has parsed an EDID "detailed timing", it leaves the frame rate zeroed. Consecutive (debug-) output of that mode thus yields 0 for vsync. This simple fix also speeds up future invocations of drm_mode_vrefresh(). While it is debatable whether this qualifies as a -stable fix I'd apply it for consistency's sake; drm_helper_probe_single_connector_modes() does the same thing already for all probed modes. Cc: stable@vger.kernel.org Signed-off-by: Torsten Duwe <duwe@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-23KMS: fix EDID detailed timing vsync parsingTorsten Duwe1-1/+1
EDID spreads some values across multiple bytes; bit-fiddling is needed to retrieve these. The current code to parse "detailed timings" has a cut&paste error that results in a vsync offset of at most 15 lines instead of 63. See http://en.wikipedia.org/wiki/EDID and in the "EDID Detailed Timing Descriptor" see bytes 10+11 show why that needs to be a left shift. Cc: stable@vger.kernel.org Signed-off-by: Torsten Duwe <duwe@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-21Merge branch 'drm-intel-fixes' of ↵Dave Airlie4-7/+31
git://people.freedesktop.org/~danvet/drm-intel into drm-next Daniel writes: Bunch of fixes, all pretty high-priority - Fix execbuf argument checking (Kees Cook) - Optionally obfuscate kernel addresses in dumps (Kees Cook) - Two patches from Takashi Iwai to fix DP link training regressions he's seen. - intel-gfx is no longer subscribers-only (well, just no longer moderated in an annoying way for non-subscribers), update MAINTAINERS - gm45 gmbus irq fallout fix (Jiri Kosina) * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: stop using GMBUS IRQs on Gen4 chips MAINTAINERS: intel-gfx is no longer subscribers-only drm/i915: Use the fixed pixel clock for eDP in intel_dp_set_m_n() Revert "drm/i915: try to train DP even harder" drm/i915: bounds check execbuffer relocation count drm/i915: restrict kernel address leak in debugfs
2013-03-21drm/mgag200: Bug fix: Modified pll algorithm for EH projectJulia Lemire1-5/+5
While testing the mgag200 kms driver on the HP ProLiant Gen8, a bug was seen. Once the bootloader would load the selected kernel, the screen would go black. At first it was assumed that the mgag200 kms driver was hanging. But after setting up the grub serial output, it was seen that the driver was being loaded properly. After trying serval monitors, one finaly displayed the message "Frequency Out of Range". By comparing the kms pll algorithm with the previous mgag200 xorg driver pll algorithm, discrepencies were found. Once the kms pll algorithm was modified, the expected pll values were produced. This fix was tested on several monitors of varying native resolutions. Signed-off-by: Julia Lemire <jlemire@matrox.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-03-20drm/exynos: Check g2d cmd list for g2d restrictionsYoungJun Cho1-0/+183
This patch checks command list from user for g2d restrictions. For now, g2d driver wasn't considered for G2D hardware restrictions properly. The below is the restrictions to G2D hardware and this patch considers them. - width or height value in the command list has to be in valid range (1 to 8000 pixels) - The requested area should be less than buffer size. - right has to be bigger than left. - bottom has to be bigger than top. Changelog v2: - Fix merge conflict. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-03-20drm/exynos: Add a new function to get gem buffer sizeInki Dae2-0/+26
This patch adds a new function to get gem buffer size. And this funtion could be used for g2d driver or others can get gem buffer size to check if the buffer is valid or not. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <inki.dae@samsung.com>
2013-03-20drm/exynos: Deal with g2d buffer info more efficientlyYoungJun Cho1-37/+123
This patch adds g2d_buf_info structure and buffer relevant variables moves into the g2d_buf_info to manage g2d buffer information more efficiently. Changelog v2: - Fix merge conflict. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-03-20drm/exynos: Clean up some G2D codes for readabilityYoungJun Cho1-9/+7
This patch just cleans up G2D codes for readability. For this, it changes the member of g2d_cmdlist_node, obj_type into buf_type. Changelog v2: - Revert irrelevant codes. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-03-20drm/exynos: Fix G2D core malfunctioning issueYoungJun Cho1-5/+15
This patch fixes G2D core malfunctioning issue once g2d dma is started. Without 'DMA_HOLD_CMD_REG' register setting, there is only one interrupt after the execution to all command lists have been completed. And that induces watchdog. So this patch sets 'LIST_HOLD' command to the register so that command execution interrupt can be occured whenever each command list execution is finished. Changelog v2: - Consider for interrupt setup to each command list and all command lists And correct typo. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-03-20drm/exynos: clear node object type at gem unmapYoungJun Cho1-0/+1
This patch clears node object type in G2D unmap cmdlist. The obj_type of cmdlist node has to be cleared in g2d_unmap_cmdlist_gem() so that the node can be reused in g2d_map_cmdlist_gem(). Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-03-20drm/exynos: Fix error routine to getting dma addr.YoungJun Cho1-2/+4
This patch fixes error routine when g2d_userptr_get_dma_add is failed. When sg_alloc_table_from_pages() is failed, it doesn't call sg_free_table() anymore. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2013-03-20drm/exynos: Replaced kzalloc & memcpy with kmemdupAlexandru Gheorghiu1-4/+2
Replaced calls to kzalloc followed by memcpy with call to kmemdup. Patch found using coccinelle. Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-03-20drm/exynos: fimd: calculate the correct address offsetLeela Krishna Amudala1-8/+9
Calculate the correct address offset values for alpha and color key control registers based on exynos4 and exynos5 user manuals. Also remove VIDOSD_C_SIZE_W0 macro and fix comments about registers for size and alpha. Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-03-20drm/exynos: Make mixer_check_timing staticSachin Kamat1-1/+1
Fixes the following sparse warning: drivers/gpu/drm/exynos/exynos_mixer.c:821:5: warning: symbol 'mixer_check_timing' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-03-20drm/exynos: modify the compatible string for exynos fimdVikas Sajjan1-2/+2
modified compatible string for exynos4 fimd as "exynos4210-fimd" and exynos5 fimd as "exynos5250-fimd" to stick to the rule that compatible value should be named after first specific SoC model in which this particular IP version was included as discussed at https://patchwork.kernel.org/patch/2144861/ Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org> Acked-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2013-03-20Merge branch 'drm-fixes-3.9' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie3-17/+38
into drm-next Alex writes: "Mostly just small bug fixes. Big change is new pci ids for Richland APUs." * 'drm-fixes-3.9' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: add Richland pci ids drm/radeon: add support for Richland APUs drm/radeon/benchmark: allow same domains for dma copy drm/radeon/benchmark: make sure bo blit copy exists before using it drm/radeon: fix backend map setup on 1 RB trinity boards drm/radeon: fix S/R on VM systems (cayman/TN/SI)
2013-03-20Merge branch 'drm-nouveau-fixes-3.9' of ↵Dave Airlie9-60/+117
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next Lots of thermal fixes and fix a lockdep warning we've been seeing. * 'drm-nouveau-fixes-3.9' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nv50/kms: prevent lockdep false-positive in page flipping path drm/nouveau/core: fix return value of nouveau_object_del() drm/nouveau/hwmon: do not expose a buggy temperature if it is unavailable drm/nouveau/therm: display the availability of the internal sensor drm/nouveau/therm: disable temperature management if the sensor isn't readable drm/nouveau/therm: disable auto fan management if temperature is not available drm/nv40/therm: reserve negative temperatures for errors drm/nv40/therm: disable temperature reading if the bios misses some parameters drm/nouveau/therm-ic: the temperature is off by sensor_constant, warn the user drm/nouveau/therm: remove some confusion introduced by therm_mode drm/nouveau/therm: do not make assumptions on temperature drm/nv40/therm: increase the sensor's settling delay to 20ms drm/nv40/therm: improve selection between the old and the new style
2013-03-20drm/i915: stop using GMBUS IRQs on Gen4 chipsJiri Kosina1-1/+10
Commit 28c70f162 ("drm/i915: use the gmbus irq for waits") switched to using GMBUS irqs instead of GPIO bit-banging for chipset generations 4 and above. It turns out though that on many systems this leads to spurious interrupts being generated, long after the register write to disable the IRQs has been issued. Typically this results in the spurious interrupt source getting disabled: [ 9.636345] irq 16: nobody cared (try booting with the "irqpoll" option) [ 9.637915] Pid: 4157, comm: ifup Tainted: GF 3.9.0-rc2-00341-g0863702 #422 [ 9.639484] Call Trace: [ 9.640731] <IRQ> [<ffffffff8109b40d>] __report_bad_irq+0x1d/0xc7 [ 9.640731] [<ffffffff8109b7db>] note_interrupt+0x15b/0x1e8 [ 9.640731] [<ffffffff810999f7>] handle_irq_event_percpu+0x1bf/0x214 [ 9.640731] [<ffffffff81099a88>] handle_irq_event+0x3c/0x5c [ 9.640731] [<ffffffff8109c139>] handle_fasteoi_irq+0x7a/0xb0 [ 9.640731] [<ffffffff8100400e>] handle_irq+0x1a/0x24 [ 9.640731] [<ffffffff81003d17>] do_IRQ+0x48/0xaf [ 9.640731] [<ffffffff8142f1ea>] common_interrupt+0x6a/0x6a [ 9.640731] <EOI> [<ffffffff8142f952>] ? system_call_fastpath+0x16/0x1b [ 9.640731] handlers: [ 9.640731] [<ffffffffa000d771>] usb_hcd_irq [usbcore] [ 9.640731] [<ffffffffa0306189>] yenta_interrupt [yenta_socket] [ 9.640731] Disabling IRQ #16 The really curious thing is now that irq 16 is _not_ the interrupt for the i915 driver when using MSI, but it _is_ the interrupt when not using MSI. So by all indications it seems like gmbus is able to generate a legacy (shared) interrupt in MSI mode on some configurations. I've tried to reproduce this and the differentiating thing seems to be that on unaffected systems no other device uses irq 16 (which seems to be the non-MSI intel gfx interrupt on all gm45). I have no idea how that even can happen. To avoid tempting this elephant into a rage, just disable gmbus interrupt support on gen 4. v2: Improve the commit message with exact details of what's going on. Also add a comment in the code to warn against this particular elephant in the room. v3: Move the comment explaing how gen4 blows up next to the definition of HAS_GMBUS_IRQ to keep the code-flow straight. Suggested by Chris Wilson. Signed-off-by: Jiri Kosina <jkosina@suse.cz> (v1) Acked-by: Chris Wilson <chris@chris-wilson.co.uk> References: https://lkml.org/lkml/2013/3/8/325 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-19drm/nv50/kms: prevent lockdep false-positive in page flipping pathBen Skeggs1-2/+2
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-19drm/nouveau/core: fix return value of nouveau_object_del()Ben Skeggs1-2/+1
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-18drm/i915: Use the fixed pixel clock for eDP in intel_dp_set_m_n()Takashi Iwai1-1/+11
The eDP output on HP Z1 is still broken when X is started even after fixing the infinite link-train loop. The regression was introduced in 3.6 kernel for cleaning up the mode clock handling code in intel_dp.c by the commit [71244653: drm/i915: adjusted_mode->clock in the dp mode_fix]. In the past, the clock of the reference mode was modified in intel_dp_mode_fixup() in the case of eDP fixed clock, and this clock was used for calculating in intel_dp_set_m_n(). This override was removed, thus the wrong mode clock is used for the calculation, resulting in a psychedelic smoking output in the end. This patch corrects the clock to be used in the place. v1->v2: Use intel_edp_target_clock() for checking eDP fixed clock instead of open code as in ironlake_set_m_n(). Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-03-18drm/nouveau/hwmon: do not expose a buggy temperature if it is unavailableMartin Peres1-13/+31
Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-18drm/nouveau/therm: display the availability of the internal sensorMartin Peres3-0/+13
Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-18drm/nouveau/therm: disable temperature management if the sensor isn't readableMartin Peres1-1/+1
Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-18drm/nouveau/therm: disable auto fan management if temperature is not availableMartin Peres1-0/+5
Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-18drm/nv40/therm: reserve negative temperatures for errorsMartin Peres1-0/+4
Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-18drm/nv40/therm: disable temperature reading if the bios misses some parametersMartin Peres2-15/+4
Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-03-18drm/nouveau/therm-ic: the temperature is off by sensor_constant, warn the userMartin Peres2-3/+5
Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 18:00:50 +0000