summaryrefslogtreecommitdiff
path: root/drivers/crypto/geode-aes.c
AgeCommit message (Collapse)AuthorFilesLines
2013-01-03Drivers: crypto: remove __dev* attributes.Greg Kroah-Hartman1-5/+3
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Kent Yoder <key@linux.vnet.ibm.com> Cc: Jamie Iles <jamie@jamieiles.com> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Cc: Alex Porosanu <alexandru.porosanu@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07crypto: geode-aes - Use module_pci_driverSachin Kamat1-14/+1
module_pci_driver makes the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-08-01crypto: drivers - remove cra_list initializationJussi Kivilinna1-3/+0
Initialization of cra_list is currently mixed, most ciphers initialize this field and most shashes do not. Initialization however is not needed at all since cra_list is initialized/overwritten in __crypto_register_alg() with list_add(). Therefore perform cleanup to remove all unneeded initializations of this field in 'crypto/drivers/'. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linux-geode@lists.infradead.org Cc: Michal Ludvig <michal@logix.cz> Cc: Dmitry Kasatkin <dmitry.kasatkin@nokia.com> Cc: Varun Wadekar <vwadekar@nvidia.com> Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Acked-by: Kent Yoder <key@linux.vnet.ibm.com> Acked-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-01-13crypto: Add CRYPTO_ALG_KERN_DRIVER_ONLY flagNikos Mavrogiannopoulos1-2/+4
The added CRYPTO_ALG_KERN_DRIVER_ONLY indicates whether a cipher is only available via a kernel driver. If the cipher implementation might be available by using an instruction set or by porting the kernel code, then it must not be set. Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-07-19crypto: geode_aes - Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID ↵Peter Huewe1-1/+1
is used) This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and .subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the PCI_VDEVICE macro, and thus improves readability. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-04-19crypto: geode-aes - Fix some code style issuesChihau Chau1-16/+20
This fixes some code style issues like: - Use #include <linux/io.h> instead of <asm/io.h> and #include <linux/delay.h> instead of <asm/delay.h> - Use "foo *bar" instead of "foo * bar" - Add a space after the for or while sentence and before the open parenthesis '(' - Don't use assignments in a if condition Signed-off-by: Chihau Chau <chihau@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-02-04crypto: geode-aes - Fix cip/blk confusionRoel Kluin1-1/+1
a crypto_cipher cip member was set where a crypto_cipher blk members should have been. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-01-08crypto: geode-aes - access .cip instead of .blk in cipher modeRoel Kluin1-3/+3
The fallback code in cipher mode touch the union fallback.blk instead of fallback.cip. This is wrong because we use the cipher and not the blockcipher. This did not show any side effects yet because both types / structs contain the same element right now. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] geode: Add __dev{init,exit} annotationsAdrian Bunk1-2/+2
This patch adds __dev{init,exit} annotations. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] geode: Use correct encrypt/decrypt function in fallbackSebastian Siewior1-2/+2
crypto_blkcipher_decrypt is wrong because it does not care about the IV. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] geode: do not copy the IV too oftenSebastian Siewior1-4/+2
There is no reason to keep the IV in the private structre. Instead keep just a pointer to make the patch smaller :) This also remove a few memcpy()s Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] geode: Add fallback for unsupported modesSebastian Siewior1-43/+200
The Geode AES crypto engine supports only 128 bit long key. This patch adds fallback for other key sizes which are required by the AES standard. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Acked-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] geode: move defines into a headerfileSebastian Siewior1-32/+0
This patch moves macros in geode-aes.c into geode-aes.h. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] geode: relax in busy loop and care about return valueSebastian Siewior1-3/+6
The code waits in a busy loop until the hardware finishes the encryption or decryption process. This wants a cpu_relax() :) The busy loop finishes either if the encryption is done or if the counter is zero. If the latter is true than the hardware failed. Since this should not happen, leave sith a BUG(). Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] geode: use consistent IV copySebastian Siewior1-6/+4
It is enough if the IV is copied before and after the while loop. With DM-Crypt is seems not be required to save the IV after encrytion because a new one is used in the request (dunno about other users). It is not save to load the IV within while loop and not save afterwards because we mill end up with the wrong IV if the request goes consists of more than one page. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] aes: Move common defines into a header fileSebastian Siewior1-0/+1
This three defines are used in all AES related hardware. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] geode: remove aliasSebastian Siewior1-1/+0
alias isn't required because the module provides PCI ids. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-11-11[CRYPTO] geode: Fix not inplace encryptionSebastian Siewior1-2/+1
Currently the Geode AES module fails to encrypt or decrypt if the coherent bits are not set what is currently the case if the encryption does not occur inplace. However, the encryption works on my Geode machine _only_ if the coherent bits are always set. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Acked-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-10[CRYPTO] aes: Rename aes to aes-genericSebastian Siewior1-0/+1
Loading the crypto algorithm by the alias instead of by module directly has the advantage that all possible implementations of this algorithm are loaded automatically and the crypto API can choose the best one depending on its priority. Additionally it ensures that the generic implementation as well as the HW driver (if available) is loaded in case the HW driver needs the generic version as fallback in corner cases. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-05-24[CRYPTO] geode: Fix in-place operations and set keyJordan Crouse1-3/+9
Allow in-place crypto operations. Also remove the coherent user flag (we use it automagically now), and by default use the user written key rather then the HW hidden key - this makes crypto just work without any special considerations, and thats OK, since its our only usage model. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-03-06[PATCH] geode-aes: use unsigned long for spin_lock_irqsaveAlexey Dobriyan1-2/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] remove many unneeded #includes of sched.hTim Schmielau1-1/+0
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-07[CRYPTO] geode: Convert pci_module_init() to pci_register_driver()Richard Knutsson1-1/+1
Replace uses of the obsolete pci_module_init function. Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-12-06[CRYPTO] geode: Make needlessly global geode_aes_crypt() staticAdrian Bunk1-1/+1
On Tue, Nov 14, 2006 at 01:41:25AM -0800, Andrew Morton wrote: >... > Changes since 2.6.19-rc5-mm2: >... > git-cryptodev.patch >... > git trees >... This patch makes the needlessly global geode_aes_crypt() static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2006-12-06[PATCH] crypto: Add support for the Geode LX AES hardwareJordan Crouse1-0/+474
Add a driver to support the AES hardware on the Geode LX processor. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 04:39:10 +0000