summaryrefslogtreecommitdiff
path: root/drivers/char
AgeCommit message (Collapse)AuthorFilesLines
2013-02-26Merge branch 'for-linus' of ↵Linus Torvalds11-23/+23
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
2013-02-26Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds2-26/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio updates from Rusty Russell: "All trivial, thanks to the stuff which didn't quite make it time" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio_console: Initialize guest_connected=true for rproc_serial virtio: use module_virtio_driver. virtio: Add module driver macro for virtio drivers. virtio_console: Use virtio device index to generate port name virtio: make pci_device_id const virtio: make config_ops const virtio-mmio: fix wrong comment about register offset virtio_console: Let unconnected rproc device receive data.
2013-02-25Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds1-55/+73
Pull drm merge from Dave Airlie: "Highlights: - TI LCD controller KMS driver - TI OMAP KMS driver merged from staging - drop gma500 stub driver - the fbcon locking fixes - the vgacon dirty like zebra fix. - open firmware videomode and hdmi common code helpers - major locking rework for kms object handling - pageflip/cursor won't block on polling anymore! - fbcon helper and prime helper cleanups - i915: all over the map, haswell power well enhancements, valleyview macro horrors cleaned up, killing lots of legacy GTT code, - radeon: CS ioctl unification, deprecated UMS support, gpu reset rework, VM fixes - nouveau: reworked thermal code, external dp/tmds encoder support (anx9805), fences sleep instead of polling, - exynos: all over the driver fixes." Lovely conflict in radeon/evergreen_cs.c between commit de0babd60d8d ("drm/radeon: enforce use of radeon_get_ib_value when reading user cmd") and the new changes that modified that evergreen_dma_cs_parse() function. * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (508 commits) drm/tilcdc: only build on arm drm/i915: Revert hdmi HDP pin checks drm/tegra: Add list of framebuffers to debugfs drm/tegra: Fix color expansion drm/tegra: Split DC_CMD_STATE_CONTROL register write drm/tegra: Implement page-flipping support drm/tegra: Implement VBLANK support drm/tegra: Implement .mode_set_base() drm/tegra: Add plane support drm/tegra: Remove bogus tegra_framebuffer structure drm: Add consistency check for page-flipping drm/radeon: Use generic HDMI infoframe helpers drm/tegra: Use generic HDMI infoframe helpers drm: Add EDID helper documentation drm: Add HDMI infoframe helpers video: Add generic HDMI infoframe helpers drm: Add some missing forward declarations drm: Move mode tables to drm_edid.c drm: Remove duplicate drm_mode_cea_vic() gma500: Fix n, m1 and m2 clock limits for sdvo and lvds ...
2013-02-22new helper: file_inode(file)Al Viro11-23/+23
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22Merge branch 'core-locking-for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core locking changes from Ingo Molnar: "The biggest change is the rwsem lock-steal improvements, both to the assembly optimized and the spinlock based variants. The other notable change is the clean up of the seqlock implementation to be based on the seqcount infrastructure. The rest is assorted smaller debuggability, cleanup and continued -rt locking changes." * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rwsem-spinlock: Implement writer lock-stealing for better scalability futex: Revert "futex: Mark get_robust_list as deprecated" generic: Use raw local irq variant for generic cmpxchg lockdep: Selftest: convert spinlock to raw spinlock seqlock: Use seqcount infrastructure seqlock: Remove unused functions ntp: Make ntp_lock raw intel_idle: Convert i7300_idle_lock to raw_spinlock locking: Various static lock initializer fixes lockdep: Print more info when MAX_LOCK_DEPTH is exceeded rwsem: Implement writer lock-stealing for better scalability lockdep: Silence warning if CONFIG_LOCKDEP isn't set watchdog: Use local_clock for get_timestamp() lockdep: Rename print_unlock_inbalance_bug() to print_unlock_imbalance_bug() locking/stat: Fix a typo
2013-02-21Merge tag 'char-misc-3.9-rc1' of ↵Linus Torvalds3-311/+346
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver patches from Greg Kroah-Hartman: "Here's the big char/misc driver patches for 3.9-rc1. Nothing major here, just lots of different driver updates (mei, hyperv, ipack, extcon, vmci, etc.). All of these have been in the linux-next tree for a while." * tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (209 commits) w1: w1_therm: Add force-pullup option for "broken" sensors w1: ds2482: Added 1-Wire pull-up support to the driver vme: add missing put_device() after device_register() fails extcon: max8997: Use workqueue to check cable state after completing boot of platform extcon: max8997: Set default UART/USB path on probe extcon: max8997: Consolidate duplicate code for checking ADC/CHG cable type extcon: max8997: Set default of ADC debounce time during initialization extcon: max8997: Remove duplicate code related to set H/W line path extcon: max8997: Move defined constant to header file extcon: max77693: Make max77693_extcon_cable static extcon: max8997: Remove unreachable code extcon: max8997: Make max8997_extcon_cable static extcon: max77693: Remove unnecessary goto statement to improve readability extcon: max77693: Convert to devm_input_allocate_device() extcon: gpio: Rename filename of extcon-gpio.c according to kernel naming style CREDITS: update email and address of Harald Hoyer extcon: arizona: Use MICDET for final microphone identification extcon: arizona: Always take the first HPDET reading as the final one extcon: arizona: Clear _trig_sts bits after jack detection extcon: arizona: Don't HPDET magic when headphones are enabled ...
2013-02-21Merge tag 'tty-3.9-rc1' of ↵Linus Torvalds3-36/+37
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial patches from Greg Kroah-Hartman: "Here's the big tty/serial driver patches for 3.9-rc1. More tty port rework and fixes from Jiri here, as well as lots of individual serial driver updates and fixes. All of these have been in the linux-next tree for a while." * tag 'tty-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: mxser: improve error handling in mxser_probe() and mxser_module_init() serial: imx: fix uninitialized variable warning serial: tegra: assume CONFIG_OF TTY: do not update atime/mtime on read/write lguest: select CONFIG_TTY to build properly. ARM defconfigs: add missing inclusions of linux/platform_device.h fb/exynos: include platform_device.h ARM: sa1100/assabet: include platform_device.h directly serial: imx: Fix recursive locking bug pps: Fix build breakage from decoupling pps from tty tty: Remove ancient hardpps() pps: Additional cleanups in uart_handle_dcd_change pps: Move timestamp read into PPS code proper pps: Don't crash the machine when exiting will do pps: Fix a use-after free bug when unregistering a source. pps: Use pps_lookup_dev to reduce ldisc coupling pps: Add pps_lookup_dev() function tty: serial: uartlite: Support uartlite on big and little endian systems tty: serial: uartlite: Fix sparse and checkpatch warnings serial/arc-uart: Miscll DT related updates (Grant's review comments) ... Fix up trivial conflicts, mostly just due to the TTY config option clashing with the EXPERIMENTAL removal.
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds3-10/+12
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-21Merge branch 'next' of ↵Linus Torvalds12-80/+1155
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates from James Morris: "This is basically a maintenance update for the TPM driver and EVM/IMA" Fix up conflicts in lib/digsig.c and security/integrity/ima/ima_main.c * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (45 commits) tpm/ibmvtpm: build only when IBM pseries is configured ima: digital signature verification using asymmetric keys ima: rename hash calculation functions ima: use new crypto_shash API instead of old crypto_hash ima: add policy support for file system uuid evm: add file system uuid to EVM hmac tpm_tis: check pnp_acpi_device return code char/tpm/tpm_i2c_stm_st33: drop temporary variable for return value char/tpm/tpm_i2c_stm_st33: remove dead assignment in tpm_st33_i2c_probe char/tpm/tpm_i2c_stm_st33: Remove __devexit attribute char/tpm/tpm_i2c_stm_st33: Don't use memcpy for one byte assignment tpm_i2c_stm_st33: removed unused variables/code TPM: Wait for TPM_ACCESS tpmRegValidSts to go high at startup tpm: Fix cancellation of TPM commands (interrupt mode) tpm: Fix cancellation of TPM commands (polling mode) tpm: Store TPM vendor ID TPM: Work around buggy TPMs that block during continue self test tpm_i2c_stm_st33: fix oops when i2c client is unavailable char/tpm: Use struct dev_pm_ops for power management TPM: STMicroelectronics ST33 I2C BUILD STUFF ...
2013-02-20drm/i915: Disable WC PTE updates to w/a buggy IOMMU on ILKChris Wilson1-2/+35
Whilst IOMMU is enabled for the Intel GPU on Ironlake, it appears that using WC writes to update the PTE on the GPU fails miserably. The result looks like the majority of the writes do not land leading to lots of screen corruption and a hard system hang. v2: s/</<=/ to preserve the current exclusion of Sandybridge Reported-by: Nathan Myers <ncm@cantrip.org> Bugzilla: https://bugzilla.freedesktop.org/show_bug.cgi?id=60391 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Nathan Myers <ncm@cantrip.org> [danvet: Remove cc: stable and add tested-by.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-19locking: Various static lock initializer fixesThomas Gleixner1-3/+3
The static lock initializers want to be fed the proper name of the lock and not some random string. In mainline random strings are obfuscating the readability of debug output, but for RT they prevent the spinlock substitution. Fix it up. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-02-15Merge branch 'acpi-cleanup'Rafael J. Wysocki2-2/+2
* acpi-cleanup: (21 commits) ACPI / hotplug: Fix concurrency issues and memory leaks ACPI: Remove the use of CONFIG_ACPI_CONTAINER_MODULE ACPI / scan: Full transition to D3cold in acpi_device_unregister() ACPI / scan: Make acpi_bus_hot_remove_device() acquire the scan lock ACPI: Drop the container.h header file ACPI / Documentation: refer to correct file for acpi_platform_device_ids[] table ACPI / scan: Make container driver use struct acpi_scan_handler ACPI / scan: Remove useless #ifndef from acpi_eject_store() ACPI: Unbind ACPI drv when probe failed ACPI: sysfs eject support for ACPI scan handlers ACPI / scan: Follow priorities of IDs when matching scan handlers ACPI / PCI: pci_slot: replace printk(KERN_xxx) with pr_xxx() ACPI / dock: Fix acpi_bus_get_device() check in drivers/acpi/dock.c ACPI / scan: Clean up acpi_bus_get_parent() ACPI / platform: Use struct acpi_scan_handler for creating devices ACPI / PCI: Make PCI IRQ link driver use struct acpi_scan_handler ACPI / PCI: Make PCI root driver use struct acpi_scan_handler ACPI / scan: Introduce struct acpi_scan_handler ACPI / scan: Make scanning of fixed devices follow the general scheme ACPI: Drop device start operation that is not used ...
2013-02-15drm/i915: Fix gen2 mappable calculationsBen Widawsky1-1/+4
When I refactored the code initially, I forgot that gen2 uses a different bar for the CPU mappable aperture. The agp-less code knows nothing of generations less than 5, so we have to expand the gtt_probe function to include the mappable base and end. It was originally broken by me: commit baa09f5fd8a6d033ec075355dda99a65b7f6a0f3 Author: Ben Widawsky <ben@bwidawsk.net> Date: Thu Jan 24 13:49:57 2013 -0800 drm/i915: Add probe and remove to the gtt ops Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-14tpm/ibmvtpm: build only when IBM pseries is configuredKent Yoder1-1/+1
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-13virtio_console: Initialize guest_connected=true for rproc_serialSjur Brændeland1-5/+2
When rproc_serial is initialized, guest_connected should be set to true. We can then revert the extra checks introduced in commit: "virtio_console: Let unconnected rproc device receive data." Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-02-13virtio: use module_virtio_driver.Rusty Russell1-12/+1
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-02-12virtio_console: Use virtio device index to generate port nameSjur Brændeland1-13/+3
Use virtio device index for creating unique device port names. Current index allocation in virtio is based on a monotonically increasing variable "index". A better handling of this is to use device index which is allocated by ida. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-02-08pcmcia: synclink_cs: cleanup checkpatch warningsAlexey Khoroshilov1-306/+310
ERROR: open brace '{' following struct go on the same line ERROR: space required after that ',' ERROR: space prohibited after that open parenthesis '(' WARNING: please, no spaces at the start of a line WARNING: please, no space before tabs Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-08pcmcia: synclink_cs: fix error handling in mgslpc_probe()Alexey Khoroshilov1-10/+41
mgslpc_probe() ignores errors in mgslpc_add_device() and does not release all resource if mgslpc_config() failed. The patch adds returned code to mgslpc_add_device() and fixes the both issues. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-07virtio_console: Don't access uninitialized data.Sjur Brændeland1-1/+2
Don't access uninitialized work-queue when removing device. The work queue is initialized only if the device multi-queue. So don't call cancel_work unless this is a multi-queue device. This fixes the following panic: Kernel panic - not syncing: BUG! Call Trace: 62031b28: [<6026085d>] panic+0x16b/0x2d3 62031b30: [<6004ef5e>] flush_work+0x0/0x1d7 62031b60: [<602606f2>] panic+0x0/0x2d3 62031b68: [<600333b0>] memcpy+0x0/0x140 62031b80: [<6002d58a>] unblock_signals+0x0/0x84 62031ba0: [<602609c5>] printk+0x0/0xa0 62031bd8: [<60264e51>] __mutex_unlock_slowpath+0x13d/0x148 62031c10: [<6004ef5e>] flush_work+0x0/0x1d7 62031c18: [<60050234>] try_to_grab_pending+0x0/0x17e 62031c38: [<6004e984>] get_work_gcwq+0x71/0x8f 62031c48: [<60050539>] __cancel_work_timer+0x5b/0x115 62031c78: [<628acc85>] unplug_port+0x0/0x191 [virtio_console] 62031c98: [<6005061c>] cancel_work_sync+0x12/0x14 62031ca8: [<628ace96>] virtcons_remove+0x80/0x15c [virtio_console] 62031ce8: [<628191de>] virtio_dev_remove+0x1e/0x7e [virtio] 62031d08: [<601cf242>] __device_release_driver+0x75/0xe4 62031d28: [<601cf2dd>] device_release_driver+0x2c/0x40 62031d48: [<601ce0dd>] driver_unbind+0x7d/0xc6 62031d88: [<601cd5d9>] drv_attr_store+0x27/0x29 62031d98: [<60115f61>] sysfs_write_file+0x100/0x14d 62031df8: [<600b737d>] vfs_write+0xcb/0x184 62031e08: [<600b58b8>] filp_close+0x88/0x94 62031e38: [<600b7686>] sys_write+0x59/0x88 62031e88: [<6001ced1>] handle_syscall+0x5d/0x80 62031ea8: [<60030a74>] userspace+0x405/0x531 62031f08: [<600d32cc>] sys_dup+0x0/0x5e 62031f28: [<601b11d6>] strcpy+0x0/0x18 62031f38: [<600be46c>] do_execve+0x10/0x12 62031f48: [<600184c7>] run_init_process+0x43/0x45 62031fd8: [<60019a91>] new_thread_handler+0xba/0xbc Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Cc: stable@kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-02-06drivers/char/mem.c: fix small coding style issuesHans Grob1-5/+5
This patch fixes four foo * bar errors, and one trailing whitespace complaint from checkpatch.pl Signed-off-by: Hans Grob <H.Grob@physik.uni-muenchen.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-02-05tpm_tis: check pnp_acpi_device return codeKent Yoder1-0/+3
Reported-by: Peter Hüwe <peterhuewe@gmx.de> Reviewed-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-05char/tpm/tpm_i2c_stm_st33: drop temporary variable for return valuePeter Huewe1-3/+1
We don't need a temporary variable just to store the return value which gets return in the next statement. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-05char/tpm/tpm_i2c_stm_st33: remove dead assignment in tpm_st33_i2c_probePeter Huewe1-2/+0
Err is never read before it is assigned again -> remove the dead assigment. Found with clang static analyzer Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-05char/tpm/tpm_i2c_stm_st33: Remove __devexit attributePeter Huewe1-1/+1
With the HOTPLUG changes 3.8 this attribute is going away. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-05char/tpm/tpm_i2c_stm_st33: Don't use memcpy for one byte assignmentPeter Huewe1-4/+2
We don't need to call memcpy for one byte, but assign it directly. And to make the offset clearer we use the array syntax on the subsequent call to memset to make the relationship clearer. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-05tpm_i2c_stm_st33: removed unused variables/codeKent Yoder1-17/+1
Reported-by: Peter Hüwe <PeterHuewe@gmx.de> Signed-off-by: Peter Hüwe <PeterHuewe@gmx.de> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-05TPM: Wait for TPM_ACCESS tpmRegValidSts to go high at startupJason Gunthorpe1-0/+21
The TIS specification (pg 47) says the valid bit must be set, but the TPM will not set it until it has completed its internal startup. The driver checks that the valid bit is set during request_locality, but it issues a TPM_ACCESS_REQUEST_USE without validating the valid bit is set. Some TPMs will ignore the TPM_ACCESS_REQUEST_USE, until valid is set which causes the request_locality to timeout, which breaks the driver attach. Wait one timeout unit for valid to assert. If valid does not assert then assume -ENODEV. Seen on embedded with a: 1.2 TPM (device-id 0x3204, rev-id 64) Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-05tpm: Fix cancellation of TPM commands (interrupt mode)Stefan Berger3-12/+31
Support cancellation of TPM commands when driver is used in interrupt mode. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-05tpm: Fix cancellation of TPM commands (polling mode)Stefan Berger8-8/+48
On one of my machines the cancellation of TPM commands does not work. The reason is that by writing into sysfs 'cancel' the tpm_tis_ready call causes the status flag TPM_STS_VALID to be set in the statusregister. However, the TIS driver seems to wait for TPM_STS_COMMAND_READY. Once a 2nd time sysfs 'cancel' is written to, the TPM_STS_COMMAND_READY flag also gets set, resulting in TPM_STS_VALID|TPM_STS_COMMAND_READY to be read from the status register. This patch now converts req_canceled into a function to enable more complex comparisons against possible cancellation status codes. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-05tpm: Store TPM vendor IDStefan Berger2-0/+3
Store the TPM vendor ID for later use. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-05TPM: Work around buggy TPMs that block during continue self testJason Gunthorpe1-1/+9
We've been testing an alternative TPM for our embedded products and found random kernel boot failures due to time outs after the continue self test command. This was happening randomly, and has been *very* hard to track down, but it looks like with this chip there is some kind of race with the tpm_tis_status() check of TPM_STS_COMMAND_READY. If things get there 'too fast' then it sees the chip is ready, or tpm_tis_ready() works. Otherwise it takes somewhere over 400ms before the chip will return TPM_STS_COMMAND_READY. Adding some delay after tpm_continue_selftest() makes things reliably hit the failure path, otherwise it is a crapshot. The spec says it should be returning TPM_WARN_DOING_SELFTEST, not holding off on ready.. Boot log during this event looks like this: tpm_tis 70030000.tpm_tis: 1.2 TPM (device-id 0x3204, rev-id 64) tpm_tis 70030000.tpm_tis: Issuing TPM_STARTUP tpm_tis 70030000.tpm_tis: tpm_transmit: tpm_send: error -62 tpm_tis 70030000.tpm_tis: [Hardware Error]: TPM command timed out during continue self test tpm_tis 70030000.tpm_tis: tpm_transmit: tpm_send: error -62 tpm_tis 70030000.tpm_tis: [Hardware Error]: TPM command timed out during continue self test tpm_tis 70030000.tpm_tis: tpm_transmit: tpm_send: error -62 tpm_tis 70030000.tpm_tis: [Hardware Error]: TPM command timed out during continue self test tpm_tis 70030000.tpm_tis: tpm_transmit: tpm_send: error -62 tpm_tis 70030000.tpm_tis: [Hardware Error]: TPM command timed out during continue self test The other TPM vendor we use doesn't show this wonky behaviour: tpm_tis 70030000.tpm_tis: 1.2 TPM (device-id 0xFE, rev-id 70) Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-05tpm_i2c_stm_st33: fix oops when i2c client is unavailableKent Yoder2-6/+11
When no i2c bus exists, user-space can cause an oops by triggering a device probe through a message sent to an i2c "new_device" sysfs entry. Adding a check for a NULL i2c client structure in the probe function closes the hole. This patch also fixes accessing the NULL client struct in the print function call reporting the error. Reported-by: Peter Hüwe <PeterHuewe@gmx.de> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-05char/tpm: Use struct dev_pm_ops for power managementPeter Huewe1-16/+12
This patch converts the suspend and resume functions for tpm_i2c_stm_st33 to the new dev_pm_ops. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-05TPM: STMicroelectronics ST33 I2C BUILD STUFFMathias Leblanc2-0/+11
* STMicroelectronics version 1.2.0, Copyright (C) 2010 * STMicroelectronics comes with ABSOLUTELY NO WARRANTY. * This is free software, and you are welcome to redistribute it * under certain conditions. This is the driver for TPM chip from ST Microelectronics. If you have a TPM security chip from STMicroelectronics working with an I2C, in menuconfig or .config choose the tpm driver on device --> tpm and activate the protocol of your choice before compiling the kernel. The driver will be accessible from within Linux. Tested on linux x86/x64, beagleboard REV B & XM REV C and CHROMIUM OS Signed-off-by: Mathias Leblanc <mathias.leblanc@st.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-05tpm: rename STM driver to match other i2c driversKent Yoder2-1/+1
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-05tpm: STM i2c driver fixesKent Yoder2-89/+69
Store the i2c_client struct in the vendor private pointer. Get rid of the unnecessary include/linux/i2c/ header. Moved include files into the driver c file. Fix smatch warnings. Make use of module_i2c_driver(). Removed unused code from the tpm_stm_st33_i2c.h file. Fix return variable signedness in tpm_stm_i2c_send() and tpm_st33_i2c_probe(). Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-05tpm: rename vendor data to priv and provide an accessorKent Yoder2-5/+7
"data" was too generic a name for what's being used as a generic private pointer by vendor-specific code. Rename it to "priv" and provide a #define for users. Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-05TPM: STMicroelectronics ST33 I2C KERNEL 3.xMathias Leblanc2-0/+984
* STMicroelectronics version 1.2.0, Copyright (C) 2010 * STMicroelectronics comes with ABSOLUTELY NO WARRANTY. * This is free software, and you are welcome to redistribute it * under certain conditions. This is the driver for TPM chip from ST Microelectronics. If you have a TPM security chip from STMicroelectronics working with an I2C, in menuconfig or .config choose the tpm driver on device --> tpm and activate the protocol of your choice before compiling the kernel. The driver will be accessible from within Linux. Tested on linux x86/x64 on kernel 3.x Signed-off-by: Mathias Leblanc <mathias.leblanc@st.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-05char/tpm: Use true and false for boolsPeter Huewe1-6/+6
Bool initializations should use true and false. Bool tests don't need comparisons. Based on contributions from Joe Perches, Rusty Russell and Bruce W Allan. The semantic patch that makes this output is available in scripts/coccinelle/misc/boolinit.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-05TPM: Switch to __packed instead of __attribute__((packed))Jason Gunthorpe2-21/+21
This seems to be preferred these days. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-05TPM: Issue TPM_STARTUP at driver load if the TPM has not been startedJason Gunthorpe2-4/+46
The TPM will respond to TPM_GET_CAP with TPM_ERR_INVALID_POSTINIT if TPM_STARTUP has not been issued. Detect this and automatically issue TPM_STARTUP. This is for embedded applications where the kernel is the first thing to touch the TPM. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Peter Huewe <peter.huewe@infineon.com> Reviewed-by: Peter Huewe <peter.huewe@infineon.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-05char/tpm: simplify duration calculation and eliminate smatch warning.Peter Huewe1-7/+6
This patch changes the semantics of the duration calculation for an ordinal, by masking out the higher bits of a tpm command, which specify whether it's an TPM_PROTECTED_COMMAND, TPM_UNPROTECTED_COMMAND, TPM_CONNECTION_COMMAND, TPM_CONNECTION_COMMAND, TPM_VENDOR_COMMAND. (See TPM Main Spec Part 2 Section 17 for details). For all TPM_PROTECTED and TPM_CONNECTION commands the results are unchanged. The TPM_UNPROTECTED commands are TSS commands and thus irrelevant as they are not sent to the tpm. For vendor commands the semantics change for ordinals 10 and 11 but they were probably wrong anyway. For everything else which has the ordinal set to 10 or 11 the semantics change as it now uses TPM_UNDEFINED instead of TPM_SHORT which was probably wrong anyway (but irrelevant as not defined by the standard). This patch also gets rid of the (false positive) smatch warning: drivers/char/tpm/tpm.c:360 tpm_calc_ordinal_duration() error: buffer overflow 'tpm_protected_ordinal_duration' 12 <= 243 Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-02-05char/tpm: Remove duplicated lookup tablePeter Huewe1-17/+1
The entries in tpm_protected_ordinal_duration are exactly the same as the first 12 in tpm_ordinal_duration, so we can simply remove this one, and save some bytes. This does not change the behavior of the driver. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-01-31drm/i915: remove intel_gtt structureBen Widawsky1-15/+21
With the probe call in our dispatch table, we can now cut away the last three remaining members in the intel_gtt shared struct and so remove it completely. v2: Rebased on top of Daniel's series Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: bikeshed commit message a bit.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-30TTY: synclink: Convert + to | for bit operationsJoe Perches1-13/+13
Dan Carpenter noticed a missing set of parentheses around a multiple field addition. https://lkml.org/lkml/2013/1/27/166 His original commit message: There is a kind of precedence problem here, but it doesn't affect how the code works because ->serial_signals is unsigned char. We want to clear two flags here. #define SerialSignal_RTS 0x20 /* Request to Send */ #define SerialSignal_DTR 0x80 /* Data Terminal Ready */ Without the parenthesis then it does: info->serial_signals &= 0x5f; With the parenthesis it does: info->serial_signals &= 0xffffff5f; info->serial_signals is an unsigned char so the two statements are equivalent, but it's cleaner to add the parenthesis. In other dtr_rts() functions the parenthesis are there so this makes it more consistent. Other changes: Convert all + uses to | for these bit operations. Reorder the multiple fields for consistency. Update the comments too. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-26ACPI: Remove useless type argument of driver .remove() operationRafael J. Wysocki2-2/+2
The second argument of ACPI driver .remove() operation is only used by the ACPI processor driver and the value passed to that driver through it is always available from the given struct acpi_device object's removal_type field. For this reason, the second ACPI driver .remove() argument is in fact useless, so drop it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2013-01-22char: Convert to devm_ioremap_resource()Thierry Reding3-10/+12
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-22virtio_console: Let unconnected rproc device receive data.Sjur Brændeland1-1/+4
Allow rproc serial ports to receive data before the port is connected. Rproc serial ports usually talk to very simple remote devices with no control queue managing open/close events. So we must let remote devices write to the virtio ring even if the device is not yet fully initialized. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-01-20Drivers: char: exynos_rng_pm_ops can be staticFengguang Wu1-1/+1
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 16:59:55 +0000