summaryrefslogtreecommitdiff
path: root/crypto/tcrypt.c
AgeCommit message (Collapse)AuthorFilesLines
2011-11-09crypto: tcrypt - add xts(twofish) testsJussi Kivilinna1-0/+5
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-09crypto: tcrypt - add xts(serpent) testsJussi Kivilinna1-0/+9
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-09crypto: tcrypt - add lrw(twofish) testsJussi Kivilinna1-0/+5
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-09crypto: tcrypt - add lrw(serpent) testsJussi Kivilinna1-0/+9
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-09crypto: tcrypt - add serpent speed testsJussi Kivilinna1-0/+30
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-09crypto: tcrypt - add test_acipher_speedJussi Kivilinna1-0/+250
Add test_acipher_speed for testing async block ciphers. Also include tests for aes/des/des3/ede as these appear to have ablk_cipher implementations available. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-11-09crypto: testmgr - add new serpent test vectorsJussi Kivilinna1-0/+2
Add new serpent tests for serpent_sse2 x86_64/i586 8-way/4-way code paths. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-10-21crypto: testmgr - add twofish testsJussi Kivilinna1-0/+1
Add tests for parallel twofish-x86_64-3way code paths. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-10-21crypto: testmgr - add blowfish test-vectorsJussi Kivilinna1-0/+1
Add tests for parallel blowfish-x86_64 code paths. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-10-21crypto: tcrypt - add ctr(twofish) speed testJussi Kivilinna1-0/+4
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-09-22crypto: tcrypt - add ctr(blowfish) speed testJussi Kivilinna1-0/+4
Add ctr(blowfish) speed test to receive results for blowfish x86_64 assembly patch. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-05-04crypto: tcrypt - CTR mode speed test for AESJan Glauber1-0/+4
Add the CTR mode speed test for AES. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-03-04crypto: tcrypt - do not attempt to write to readonly variableDavid Sterba1-1/+2
Commit da7f033ddc9fdeb (”crypto: cryptomgr - Add test infrastructure”) added a const to variable which is later used as target buffer of memcpy. crypto/tcrypt.c:217:12: warning: passing 'const char (*)[128]' to parameter of type 'void *' discards qualifiers memset(&iv, 0xff, iv_len); crypto/tcrypt.c:test_cipher_speed() - unsigned char *key, iv[128]; + const char *key, iv[128]; ... memset(&iv, 0xff, iv_len); Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-11-13crypto: rfc4106 - Extending the RC4106 AES-GCM test vectorsAdrian Hoban1-0/+11
Updated RFC4106 AES-GCM testing. Some test vectors were taken from http://csrc.nist.gov/groups/ST/toolkit/BCM/documents/proposedmodes/ gcm/gcm-test-vectors.tar.gz Signed-off-by: Adrian Hoban <adrian.hoban@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com> Signed-off-by: Aidan O'Mahony <aidan.o.mahony@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-19crypto: tcrypt - Add speed tests for async hashingDavid S. Miller1-6/+330
These are invoked in the 'mode' range of 400 to 499. The cost of async vs. sync for the software algorithm implementations varies. It can be as low as 16 cycles but as much as a couple hundred. Here two runs of md5 testing, async then sync: testing speed of async md5 test 0 ( 16 byte blocks, 16 bytes per update, 1 updates): 2448 cycles/operation, 153 cycles/byte test 1 ( 64 byte blocks, 16 bytes per update, 4 updates): 4992 cycles/operation, 78 cycles/byte test 2 ( 64 byte blocks, 64 bytes per update, 1 updates): 3808 cycles/operation, 59 cycles/byte test 3 ( 256 byte blocks, 16 bytes per update, 16 updates): 14000 cycles/operation, 54 cycles/byte test 4 ( 256 byte blocks, 64 bytes per update, 4 updates): 8480 cycles/operation, 33 cycles/byte test 5 ( 256 byte blocks, 256 bytes per update, 1 updates): 7280 cycles/operation, 28 cycles/byte test 6 ( 1024 byte blocks, 16 bytes per update, 64 updates): 50016 cycles/operation, 48 cycles/byte test 7 ( 1024 byte blocks, 256 bytes per update, 4 updates): 22496 cycles/operation, 21 cycles/byte test 8 ( 1024 byte blocks, 1024 bytes per update, 1 updates): 21232 cycles/operation, 20 cycles/byte test 9 ( 2048 byte blocks, 16 bytes per update, 128 updates): 117184 cycles/operation, 57 cycles/byte test 10 ( 2048 byte blocks, 256 bytes per update, 8 updates): 43008 cycles/operation, 21 cycles/byte test 11 ( 2048 byte blocks, 1024 bytes per update, 2 updates): 40176 cycles/operation, 19 cycles/byte test 12 ( 2048 byte blocks, 2048 bytes per update, 1 updates): 39888 cycles/operation, 19 cycles/byte test 13 ( 4096 byte blocks, 16 bytes per update, 256 updates): 194176 cycles/operation, 47 cycles/byte test 14 ( 4096 byte blocks, 256 bytes per update, 16 updates): 84096 cycles/operation, 20 cycles/byte test 15 ( 4096 byte blocks, 1024 bytes per update, 4 updates): 78336 cycles/operation, 19 cycles/byte test 16 ( 4096 byte blocks, 4096 bytes per update, 1 updates): 77120 cycles/operation, 18 cycles/byte test 17 ( 8192 byte blocks, 16 bytes per update, 512 updates): 403056 cycles/operation, 49 cycles/byte test 18 ( 8192 byte blocks, 256 bytes per update, 32 updates): 166112 cycles/operation, 20 cycles/byte test 19 ( 8192 byte blocks, 1024 bytes per update, 8 updates): 154768 cycles/operation, 18 cycles/byte test 20 ( 8192 byte blocks, 4096 bytes per update, 2 updates): 151904 cycles/operation, 18 cycles/byte test 21 ( 8192 byte blocks, 8192 bytes per update, 1 updates): 155456 cycles/operation, 18 cycles/byte testing speed of md5 test 0 ( 16 byte blocks, 16 bytes per update, 1 updates): 2208 cycles/operation, 138 cycles/byte test 1 ( 64 byte blocks, 16 bytes per update, 4 updates): 5008 cycles/operation, 78 cycles/byte test 2 ( 64 byte blocks, 64 bytes per update, 1 updates): 3600 cycles/operation, 56 cycles/byte test 3 ( 256 byte blocks, 16 bytes per update, 16 updates): 14080 cycles/operation, 55 cycles/byte test 4 ( 256 byte blocks, 64 bytes per update, 4 updates): 8560 cycles/operation, 33 cycles/byte test 5 ( 256 byte blocks, 256 bytes per update, 1 updates): 7040 cycles/operation, 27 cycles/byte test 6 ( 1024 byte blocks, 16 bytes per update, 64 updates): 50592 cycles/operation, 49 cycles/byte test 7 ( 1024 byte blocks, 256 bytes per update, 4 updates): 22736 cycles/operation, 22 cycles/byte test 8 ( 1024 byte blocks, 1024 bytes per update, 1 updates): 24960 cycles/operation, 24 cycles/byte test 9 ( 2048 byte blocks, 16 bytes per update, 128 updates): 99312 cycles/operation, 48 cycles/byte test 10 ( 2048 byte blocks, 256 bytes per update, 8 updates): 43520 cycles/operation, 21 cycles/byte test 11 ( 2048 byte blocks, 1024 bytes per update, 2 updates): 40704 cycles/operation, 19 cycles/byte test 12 ( 2048 byte blocks, 2048 bytes per update, 1 updates): 39552 cycles/operation, 19 cycles/byte test 13 ( 4096 byte blocks, 16 bytes per update, 256 updates): 196720 cycles/operation, 48 cycles/byte test 14 ( 4096 byte blocks, 256 bytes per update, 16 updates): 85152 cycles/operation, 20 cycles/byte test 15 ( 4096 byte blocks, 1024 bytes per update, 4 updates): 79408 cycles/operation, 19 cycles/byte test 16 ( 4096 byte blocks, 4096 bytes per update, 1 updates): 76816 cycles/operation, 18 cycles/byte test 17 ( 8192 byte blocks, 16 bytes per update, 512 updates): 391520 cycles/operation, 47 cycles/byte test 18 ( 8192 byte blocks, 256 bytes per update, 32 updates): 168464 cycles/operation, 20 cycles/byte test 19 ( 8192 byte blocks, 1024 bytes per update, 8 updates): 156912 cycles/operation, 19 cycles/byte test 20 ( 8192 byte blocks, 4096 bytes per update, 2 updates): 154016 cycles/operation, 18 cycles/byte test 21 ( 8192 byte blocks, 8192 bytes per update, 1 updates): 153856 cycles/operation, 18 cycles/byte We can ditch the sync hash code at some point if we feel that makes sense. For now I've left it there. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2010-05-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6Herbert Xu1-1/+1
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-1/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-10crypto: tcrypt - Speed testing support for ghashHuang Ying1-0/+7
Because ghash needs setkey, the setkey and keysize template support for test_hash_speed is added. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-09-02crypto: vmac - New hash algorithm for intel_txt supportShane Wang1-0/+4
This patch adds VMAC (a fast MAC) support into crypto framework. Signed-off-by: Shane Wang <shane.wang@intel.com> Signed-off-by: Joseph Cihula <joseph.cihula@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-07-14crypto: tcrypt - Add mask parameterHerbert Xu1-3/+6
This patch adds a mask parameter to complement the existing type parameter. This is useful when instantiating algorithms that require a mask other than the default, e.g., ahash algorithms. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-06-19crypto: tcrypt - Fix module return code when testing by nameHerbert Xu1-1/+1
We should return 0/-ENOENT instead of 1/0 when testing by name. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-06-19crypto: tcrypt - Test algorithms by nameSteffen Klassert1-1/+14
This adds the 'alg' module parameter to be able to test an algorithm by name. If the algorithm type is not ad-hoc clear for a algorithm (e.g. pcrypt, cryptd) it is possilbe to set the algorithm type with the 'type' module parameter. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-06-02crypto: tcrypt - Do not exit on success in fips modeJarod Wilson1-74/+90
At present, the tcrypt module always exits with an -EAGAIN upon successfully completing all the tests its been asked to run. In fips mode, integrity checking is done by running all self-tests from the initrd, and its much simpler to check the ret from modprobe for success than to scrape dmesg and/or /proc/crypto. Simply stay loaded, giving modprobe a retval of 0, if self-tests all pass and we're in fips mode. A side-effect of tracking success/failure for fips mode is that in non-fips mode, self-test failures will return the actual failure return codes, rather than always returning -EAGAIN, which seems more correct anyway. The tcrypt_test() portion of the patch is dependent on my earlier pair of patches that skip non-fips algs in fips mode, at least to achieve the fully intended behavior. Nb: testing this patch against the cryptodev tree revealed a test failure for sha384, which I have yet to look into... Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-06-02crypto: testmgr - Add ctr(aes) test vectorsJarod Wilson1-0/+1
Now with multi-block test vectors, all from SP800-38A, Appendix F.5. Also added ctr(aes) to case 10 in tcrypt. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-06-02crypto: testmgr - Add ansi_cprng test vectorsJarod Wilson1-0/+4
Add ANSI X9.31 Continuous Pseudo-Random Number Generator (AES mode), aka 'ansi_cprng' test vectors, taken from Appendix B.2.9 and B.2.10 of the NIST RNGVS document, found here: http://csrc.nist.gov/groups/STM/cavp/documents/rng/RNGVS.pdf Successfully tested against both the cryptodev-2.6 tree and a Red Hat Enterprise Linux 5.4 kernel, via 'modprobe tcrypt mode=150'. The selection of 150 was semi-arbitrary, didn't seem like it should go any place in particular, so I started a new range for rng tests. Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-06-02crypto: testmgr - Add self-tests for rfc4309(ccm(aes))Jarod Wilson1-0/+4
Add an array of encryption and decryption + verification self-tests for rfc4309(ccm(aes)). Test vectors all come from sample FIPS CAVS files provided to Red Hat by a testing lab. Unfortunately, all the published sample vectors in RFC 3610 and NIST Special Publication 800-38C contain nonce lengths that the kernel's rfc4309 implementation doesn't support, so while using some public domain vectors would have been preferred, its not possible at this time. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-06-02crypto: tcrypt - Reduce stack sizeFrank Seidel1-7/+9
Applying kernel janitors todos (printk calls need KERN_* constants on linebeginnings, reduce stack footprint where possible) to tcrypts test_hash_speed (where stacks memory footprint was very high (on i386 1184 bytes to 160 now). Signed-off-by: Frank Seidel <frank@f-seidel.de> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-03-04crypto: testmgr - add zlib testGeert Uytterhoeven1-1/+5
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-29crypto: cryptomgr - Add test infrastructureHerbert Xu1-1700/+8
This patch moves the newly created alg_test infrastructure into cryptomgr. This shall allow us to use it for testing at algorithm registrations. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-29crypto: tcrypt - Add alg_test interfaceHerbert Xu1-438/+1017
This patch creates a new interface algorithm testing. A test can be requested for a particular implementation of an algorithm. This is achieved by taking both the name of the algorithm and that of the implementation. The all-inclusive test has also been rewritten to no longer require a duplicate listing of all algorithms with tests. In that process a number of missing tests have also been discovered and rectified. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-29crypto: tcrypt - Abort and only log if there is an errorHerbert Xu1-146/+200
The info printed is a complete waste of space when there is no error since it doesn't tell us anything that we don't already know. If there is an error, we can also be more verbose. In case that there is an error, this patch also aborts the test and returns the error to the caller. In future this will be used to algorithms at registration time. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-29crypto: tcrypt - Avoid using contiguous pagesHerbert Xu1-153/+151
If tcrypt is to be used as a run-time integrity test, it needs to be more resilient in a hostile environment. For a start allocating 32K of physically contiguous memory is definitely out. This patch teaches it to use separate pages instead. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-08-13crypto: tcrypt - Fix AEAD chunk testingHerbert Xu1-9/+19
My changeset 4b22f0ddb6564210c9ded7ba25b2a1007733e784 crypto: tcrpyt - Remove unnecessary kmap/kunmap calls introduced a typo that broke AEAD chunk testing. In particular, axbuf should really be xbuf. There is also an issue with testing the last segment when encrypting. The additional part produced by AEAD wasn't tested. Similarly, on decryption the additional part of the AEAD input is mistaken for corruption. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10crypto: hash - Move ahash functions into crypto/hash.hHerbert Xu1-0/+1
All new crypto interfaces should go into individual files as much as possible in order to ensure that crypto.h does not collapse under its own weight. This patch moves the ahash code into crypto/hash.h and crypto/internal/hash.h respectively. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10crypto: tcrpyt - Remove unnecessary kmap/kunmap callsHerbert Xu1-10/+5
Noticed by Neil Horman: we are doing unnecessary kmap/kunmap calls on kmalloced memory. This patch removes them. For the purposes of testing SG construction, the underlying crypto code already does plenty of kmap/kunmap calls anyway. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[CRYPTO] tcrypt: Add self test for des3_ebe cipher operating in cbc modeNeil Horman1-0/+16
Patch to add checking of DES3 test vectors using CBC mode. FIPS-140-2 compliance mandates that any supported mode of operation must include a self test. This satisfies that requirement for cbc(des3_ede). The included test vector was generated by me using openssl. Key/IV was generated with the following command: openssl enc -des_ede_cbc -P input and output values were generated by repeating the string "Too many secrets" a few times over, truncating it to 128 bytes, and encrypting it with openssl using the aformentioned key. Tested successfully by myself Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[CRYPTO] tcrypt: Use asynchronous hash interfaceLoc Ho1-19/+57
This patch changes tcrypt to use the new asynchronous hash interface for testing hash algorithm correctness. The speed tests will continue to use the existing interface for now. Signed-off-by: Loc Ho <lho@amcc.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[CRYPTO] tcrypt: Add test vectors for RIPEMD-256 and RIPEMD-320Adrian-Ken Rueegsegger1-2/+19
This patch adds test vectors for RIPEMD-256 and RIPEMD-320 hash algorithms. The test vectors are taken from <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html> Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[CRYPTO] tcrypt: Catch cipher destination memory corruptionPatrick McHardy1-5/+21
Check whether the destination buffer is written to beyond the last byte contained in the scatterlist. Also change IDX1 of the cross-page access offsets to a multiple of 4. This triggers a corruption in the HIFN driver and doesn't seem to negatively impact other testcases. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[CRYPTO] tcrpyt: Get rid of change log in sourceHerbert Xu1-8/+0
Change logs should be kept in source control systems, not the source. This patch removes the change log from tcrpyt to stop people from extending it any more. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-10[CRYPTO] tcrypt: Add test vectors for RIPEMD-128 and RIPEMD-160Adrian-Ken Rueegsegger1-1/+28
This patch adds test vectors for RIPEMD-128 and RIPEMD-160 hash algorithms and digests (HMAC). The test vectors are taken from ISO:IEC 10118-3 (2004) and RFC2286. Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-07-08crypto: tcrypt - Fix memory leak in test_cipherDarren Jenkins1-9/+1
Coverity CID: 2306 & 2307 RESOURCE_LEAK In the second for loop in test_cipher(), data is allocated space with kzalloc() and is only ever freed in an error case. Looking at this loop, data is written to this memory but nothing seems to read from it. So here is a patch removing the allocation, I think this is the right fix. Only compile tested. Signed-off-by: Darren Jenkins <darrenrjenkins@gmailcom> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21[CRYPTO] all: Clean up init()/fini()Kamalesh Babulal1-4/+4
On Thu, Mar 27, 2008 at 03:40:36PM +0100, Bodo Eggert wrote: > Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> wrote: > > > This patch cleanups the crypto code, replaces the init() and fini() > > with the <algorithm name>_init/_fini > > This part ist OK. > > > or init/fini_<algorithm name> (if the > > <algorithm name>_init/_fini exist) > > Having init_foo and foo_init won't be a good thing, will it? I'd start > confusing them. > > What about foo_modinit instead? Thanks for the suggestion, the init() is replaced with <algorithm name>_mod_init () and fini () is replaced with <algorithm name>_mod_fini. Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21[CRYPTO] cts: Add CTS mode required for Kerberos AES supportKevin Coffman1-2/+14
Implement CTS wrapper for CBC mode required for support of AES encryption support for Kerberos (rfc3962). Signed-off-by: Kevin Coffman <kwc@citi.umich.edu> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21[CRYPTO] tcrypt: Change the usage of the test vectorsSebastian Siewior1-165/+181
The test routines (test_{cipher,hash,aead}) are makeing a copy of the test template and are processing the encryption process in place. This patch changes the creation of the copy so it will work even if the source address of the input data isn't an array inside of the template but a pointer. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21[CRYPTO] tcrypt: Shrink speed templatesSebastian Siewior1-39/+50
The speed templates as it look always the same. The key size is repeated for each block size and we test always the same block size. The addition of one inner loop makes it possible to get rid of the struct and it is possible to use a tiny u8 array :) Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-04-21[CRYPTO] tcrypt: Group common speed templatesSebastian Siewior1-37/+33
Some crypto ciphers which are impleneted support similar key sizes (16,24 & 32 byte). They can be grouped together and use a common templatte instead of their own which contains the same data. Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] tcrypt: Make xcbc available as a standalone testHerbert Xu1-0/+6
Currently the gcm(aes) tests have to be taken together with all other algorithms. This patch makes it available by itself at number 106. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] tcrypt: Zero axbuf in the right functionHerbert Xu1-1/+1
The axbuf buffer is used by test_aead and therefore should be zeroed there instead of in test_hash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2008-01-11[CRYPTO] tcrypt: Add CCM vectorsJoy Latten1-2/+29
This patch adds 7 test vectors to tcrypt for CCM. The test vectors are from rfc 3610. There are about 10 more test vectors in RFC 3610 and 4 or 5 more in NIST. I can add these as time permits. I also needed to set authsize. CCM has a prerequisite of authsize. Signed-off-by: Joy Latten <latten@austin.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>