summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2009-02-25[IA64] Don't go beyond iosapic_intr_info's arraysizeRoel Kluin1-1/+1
vi arch/ia64/kernel/iosapic.c +142 static struct iosapic_intr_info { ... } iosapic_intr_info[NR_IRQS]; But at line 510 we have: for (i = 0; i <= NR_IRQS; i++) { s/<=/</ Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-02-25[IA64] Do not go beyond ARRAY_SIZE of unw.hashRoel Kluin1-1/+1
static struct { ... :114 unsigned short hash[UNW_HASH_SIZE]; ... :2152 for (index = 0; index <= UNW_HASH_SIZE; ++index) { This is a bug, isn't it? s/<=/</ Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-02-25[IA64] enable setting DMAR on by defaultKyle McMartin1-0/+11
The previous commit which introduced the DMAR_DEFAULT_ON setting in drivers/pci/dmar.c neglected to add the ability for ia64 to enable the IOMMU by default. Rectify that mistake, doh! Signed-off-by: Kyle McMartin <kyle@redhat.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-02-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds1-0/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix crashes in jbusmc_print_dimm()
2009-02-24Add i2c_board_info for RiscPC PCF8583Russell King1-0/+6
Add the necessary i2c_board_info structure to fix the lack of PCF8583 RTC on RiscPC. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Alessandro Zummo <a.zummo@towertech.it>
2009-02-22PM: Split up sysdev_[suspend|resume] from device_power_[down|up]Rafael J. Wysocki1-0/+4
Move the sysdev_suspend/resume from the callee to the callers, with no real change in semantics, so that we can rework the disabling of interrupts during suspend/hibernation. This is based on an earlier patch from Linus. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-22x86: Add IRQF_TIMER to legacy x86 timer interrupt descriptorsLinus Torvalds4-4/+4
Right now nobody cares, but the suspend/resume code will eventually want to suspend device interrupts without suspending the timer, and will depend on this flag to know. The modern x86 timer infrastructure uses the local APIC timers and never shows up as a device interrupt at all, so it isn't affected and doesn't need any of this. Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-22Merge branch 'release' of ↵Linus Torvalds1-20/+10
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: remove CONFIG_ACPI_SYSTEM fujitsu-laptop: Use RFKILL support bitmask from firmware x86_64: Fix S3 fail path x86_64: acpi/wakeup_64 cleanup battery: don't assume we are fully charged when not charging or discharging ACPI: EC: Add delay for slow MSI controller
2009-02-22m68k: atari - Rename "mfp" to "st_mfp"Geert Uytterhoeven7-31/+31
http://kisskb.ellerman.id.au/kisskb/buildresult/72115/: | net/mac80211/ieee80211_i.h:327: error: syntax error before 'volatile' | net/mac80211/ieee80211_i.h:350: error: syntax error before '}' token | net/mac80211/ieee80211_i.h:455: error: field 'sta' has incomplete type | distcc[19430] ERROR: compile net/mac80211/main.c on sprygo/32 failed This is caused by | # define mfp ((*(volatile struct MFP*)MFP_BAS)) in arch/m68k/include/asm/atarihw.h, which conflicts with the new "mfp" enum in net/mac80211/ieee80211_i.h. Rename "mfp" to "st_mfp", as it's a way too generic name for a global #define. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-21x86_64: Fix S3 fail pathJiri Slaby1-1/+3
As acpi_enter_sleep_state can fail, take this into account in do_suspend_lowlevel and don't return to the do_suspend_lowlevel's caller. This would break (currently) fpu status and preempt count. Technically, this means use `call' instead of `jmp' and `jmp' to the `resume_point' after the `call' (i.e. if acpi_enter_sleep_state returns=fails). `resume_point' will handle the restore of fpu and preempt count gracefully. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-21x86_64: acpi/wakeup_64 cleanupJiri Slaby1-19/+7
- remove %ds re-set, it's already set in wakeup_long64 - remove double labels and alignment (ENTRY already adds both) - use meaningful resume point labelname - skip alignment while jumping from wakeup_long64 to the resume point - remove .size, .type and unused labels [v2] - added ENDPROCs Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-21Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds3-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, mce: remove incorrect __cpuinit for mce_cpu_features() MAINTAINERS: paravirt-ops maintainers update
2009-02-20x86, mce: remove incorrect __cpuinit for mce_cpu_features()H. Peter Anvin3-4/+4
Impact: Bug fix on UP Checkin 6ec68bff3c81e776a455f6aca95c8c5f1d630198: x86, mce: reinitialize per cpu features on resume introduced a call to mce_cpu_features() in the resume path, in order for the MCE machinery to get properly reinitialized after a resume. However, this function (and its successors) was flagged __cpuinit, which becomes __init on UP configurations (on SMP suspend/resume requires CPU hotplug and so this would not be seen.) Remove the offending __cpuinit annotations for mce_cpu_features() and its successor functions. Cc: Andi Kleen <ak@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-20Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds2-11/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: use the right protections for split-up pagetables x86, vmi: TSC going backwards check in vmi clocksource
2009-02-20mn10300: fix typo && -> || in arch/mn10300/unit-asb2305/pci.cWei Yongjun1-1/+1
Fix the typo && -> ||. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-20mn10300: fix oprofileDavid Howells1-0/+1
oprofile for MN10300 seems to have been broken by the advent of the new tracing framework. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-20uml: fix vde network backend in user mode linuxLuca Bigliardi1-3/+3
* Replace kmalloc() with uml_kmalloc() (fix build failure) * Remove unnecessary UM_KERN_INFO in printk() (don't display '<6>' while printing info) Signed-off-by: Luca Bigliardi <shammash@artha.org> Cc: Jiri Kosina <jkosina@suse.cz> Reviewed-by: WANG Cong <wangcong@zeuux.org> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-20x86: use the right protections for split-up pagetablesIngo Molnar1-10/+5
Steven Rostedt found a bug in where in his modified kernel ftrace was unable to modify the kernel text, due to the PMD itself having been marked read-only as well in split_large_page(). The fix, suggested by Linus, is to not try to 'clone' the reference protection of a huge-page, but to use the standard (and permissive) page protection bits of KERNPG_TABLE. The 'cloning' makes sense for the ptes but it's a confused and incorrect concept at the page table level - because the pagetable entry is a set of all ptes and hence cannot 'clone' any single protection attribute - the ptes can be any mixture of protections. With the permissive KERNPG_TABLE, even if the pte protections get changed after this point (due to ftrace doing code-patching or other similar activities like kprobes), the resulting combined protections will still be correct and the pte's restrictive (or permissive) protections will control it. Also update the comment. This bug was there for a long time but has not caused visible problems before as it needs a rather large read-only area to trigger. Steve possibly hacked his kernel with some really large arrays or so. Anyway, the bug is definitely worth fixing. [ Huang Ying also experienced problems in this area when writing the EFI code, but the real bug in split_large_page() was not realized back then. ] Reported-by: Steven Rostedt <rostedt@goodmis.org> Reported-by: Huang Ying <ying.huang@intel.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-20x86, vmi: TSC going backwards check in vmi clocksourceAlok N Kataria1-1/+4
Impact: fix time warps under vmware Similar to the check for TSC going backwards in the TSC clocksource, we also need this check for VMI clocksource. Signed-off-by: Alok N Kataria <akataria@vmware.com> Cc: Zachary Amsden <zach@vmware.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: stable@kernel.org
2009-02-19Merge branch 'release' of ↵Linus Torvalds7-12/+1617
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] xen_domu build fix [IA64] fixes configs and add default config for ia64 xen domU [IA64] Remove redundant cpu_clear() in __cpu_disable path [IA64] Revert "prevent ia64 from invoking irq handlers on offline CPUs" [IA64] bte_copy of BTE_MAX_XFER trips BUG_ON. [IA64] Build fix for __early_pfn_to_nid() undefined link error
2009-02-19[IA64] xen_domu build fixTony Luck1-2/+2
arch/ia64/xen/xen_pv_ops.c:156: error: xen_init_ops causes a section type conflict arch/ia64/xen/xen_pv_ops.c:340: error: xen_iosapic_ops causes a section type conflict Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-02-19[IA64] fixes configs and add default config for ia64 xen domUIsaku Yamahata3-2/+1606
This patch fixes xen related Kconfigs and add default config file for ia64 xen domU. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Tony Luck <aegl@agluck-desktop.(none)>
2009-02-19[IA64] Remove redundant cpu_clear() in __cpu_disable pathAlex Chiang1-2/+1
The second call to cpu_clear() is redundant, as we've already removed the CPU from cpu_online_map before calling migrate_platform_irqs(). Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Tony Luck <aegl@agluck-desktop.(none)>
2009-02-19[IA64] Revert "prevent ia64 from invoking irq handlers on offline CPUs"Alex Chiang1-1/+3
This reverts commit e7b140365b86aaf94374214c6f4e6decbee2eb0a. Commit e7b14036 removes the targetted disabled CPU from the cpu_online_map after calls to migrate_platform_irqs and fixup_irqs. Paul McKenney states that the reasoning behind the patch was to prevent irq handlers from running on CPUs marked offline because: RCU happily ignores CPUs that don't have their bits set in cpu_online_map, so if there are RCU read-side critical sections in the irq handlers being run, RCU will ignore them. If the other CPUs were running, they might sequence through the RCU state machine, which could result in data structures being yanked out from under those irq handlers, which in turn could result in oopses or worse. Unfortunately, both ia64 functions above look at cpu_online_map to find a new CPU to migrate interrupts onto. This means we can potentially migrate an interrupt off ourself back to... ourself. Uh oh. This causes an oops when we finally try to process pending interrupts on the CPU we want to disable. The oops results from calling __do_IRQ with a NULL pt_regs: Unable to handle kernel NULL pointer dereference (address 0000000000000040) Call Trace: [<a000000100016930>] show_stack+0x50/0xa0 sp=e0000009c922fa00 bsp=e0000009c92214d0 [<a0000001000171a0>] show_regs+0x820/0x860 sp=e0000009c922fbd0 bsp=e0000009c9221478 [<a00000010003c700>] die+0x1a0/0x2e0 sp=e0000009c922fbd0 bsp=e0000009c9221438 [<a0000001006e92f0>] ia64_do_page_fault+0x950/0xa80 sp=e0000009c922fbd0 bsp=e0000009c92213d8 [<a00000010000c7a0>] ia64_native_leave_kernel+0x0/0x270 sp=e0000009c922fc60 bsp=e0000009c92213d8 [<a0000001000ecdb0>] profile_tick+0xd0/0x1c0 sp=e0000009c922fe30 bsp=e0000009c9221398 [<a00000010003bb90>] timer_interrupt+0x170/0x3e0 sp=e0000009c922fe30 bsp=e0000009c9221330 [<a00000010013a800>] handle_IRQ_event+0x80/0x120 sp=e0000009c922fe30 bsp=e0000009c92212f8 [<a00000010013aa00>] __do_IRQ+0x160/0x4a0 sp=e0000009c922fe30 bsp=e0000009c9221290 [<a000000100012290>] ia64_process_pending_intr+0x2b0/0x360 sp=e0000009c922fe30 bsp=e0000009c9221208 [<a0000001000112d0>] fixup_irqs+0xf0/0x2a0 sp=e0000009c922fe30 bsp=e0000009c92211a8 [<a00000010005bd80>] __cpu_disable+0x140/0x240 sp=e0000009c922fe30 bsp=e0000009c9221168 [<a0000001006c5870>] take_cpu_down+0x50/0xa0 sp=e0000009c922fe30 bsp=e0000009c9221148 [<a000000100122610>] stop_cpu+0xd0/0x200 sp=e0000009c922fe30 bsp=e0000009c92210f0 [<a0000001000e0440>] kthread+0xc0/0x140 sp=e0000009c922fe30 bsp=e0000009c92210c8 [<a000000100014ab0>] kernel_thread_helper+0xd0/0x100 sp=e0000009c922fe30 bsp=e0000009c92210a0 [<a00000010000a4c0>] start_kernel_thread+0x20/0x40 sp=e0000009c922fe30 bsp=e0000009c92210a0 I don't like this revert because it is fragile. ia64 is getting lucky because we seem to only ever process timer interrupts in this path, but if we ever race with an IPI here, we definitely use RCU and have the potential of hitting an oops that Paul describes above. Patching ia64's timer_interrupt() to check for NULL pt_regs is insufficient though, as we still hit the above oops. As a short term solution, I do think that this revert is the right answer. The revert hold up under repeated testing (24+ hour test runs) with this setup: - 8-way rx6600 - randomly toggling CPU online/offline state every 2 seconds - running CPU exercisers, memory hog, disk exercisers, and network stressors - average system load around ~160 In the long term, we really need to figure out why we set pt_regs = NULL in ia64_process_pending_intr(). If it turns out that it is unnecessary to do so, then we could safely re-introduce e7b14036 (along with some other logic to be smarter about migrating interrupts). One final note: x86 also removes the disabled CPU from cpu_online_map and then re-enables interrupts for 1ms, presumably to handle any pending interrupts: arch/x86/kernel/irq_32.c (and irq_64.c): cpu_disable_common: [remove cpu from cpu_online_map] fixup_irqs(): for_each_irq: [break CPU affinities] local_irq_enable(); mdelay(1); local_irq_disable(); So they are doing implicitly what ia64 is doing explicitly. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Tony Luck <aegl@agluck-desktop.(none)>
2009-02-19[IA64] bte_copy of BTE_MAX_XFER trips BUG_ON.Robin Holt2-4/+5
BTE_MAX_XFER is wrong. It is one greater than the number of cache lines the BTE is actually able to transfer. If you request a transfer of exactly BTE_MAX_XFER size, you trip a very cryptic BUG_ON() which should certainly be made more clear. This patch fixes that constant and also cleans up the BUG_ON()s in arch/ia64/sn/kernel/bte.c to test one condition per line. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Tony Luck <aegl@agluck-desktop.(none)>
2009-02-19[IA64] Build fix for __early_pfn_to_nid() undefined link errorTony Luck1-2/+1
ia64 only defines __early_pfn_to_nid() for SPARSEMEM && NUMA configurations, so the recent: commit: f2dbcfa738368c8a40d4a5f0b65dc9879577cb21 mm: clean up for early_pfn_to_nid() ends up with some link problems for certain configuration files. Fix arch/ia64/Kconfig to only define HAVE_ARCH_EARLY_PFN_TO_NID in the cases where we do provide this function. Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-02-19Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds23-83/+63
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5405/1: ep93xx: remove unused gesbc9312.h header [ARM] 5404/1: Fix condition in arm_elf_read_implies_exec() to set READ_IMPLIES_EXEC [ARM] omap: fix clock reparenting in omap2_clk_set_parent() [ARM] 5403/1: pxa25x_ep_fifo_flush() *ep->reg_udccs always set to 0 [ARM] 5402/1: fix a case of wrap-around in sanity_check_meminfo() [ARM] 5401/1: Orion: fix edge triggered GPIO interrupt support [ARM] 5400/1: Add support for inverted rdy_busy pin for Atmel nand device controller [ARM] 5391/1: AT91: Enable GPIO clocks earlier [ARM] 5390/1: AT91: Watchdog fixes [ARM] 5398/1: Add Wan ZongShun to MAINTAINERS for W90P910 [ARM] omap: fix _omap2_clksel_get_src_field() [ARM] omap: fix omap2_divisor_to_clksel() error return value
2009-02-19Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds3-6/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, mce: fix ifdef for 64bit thermal apic vector clear on shutdown x86, mce: use force_sig_info to kill process in machine check x86, mce: reinitialize per cpu features on resume x86, rcu: fix strange load average and ksoftirqd behavior
2009-02-19[ARM] 5405/1: ep93xx: remove unused gesbc9312.h headerHartley Sweeten2-4/+0
Remove the gesbc9312.h header since it is unused. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19[ARM] 5404/1: Fix condition in arm_elf_read_implies_exec() to set ↵Makito SHIOKAWA1-2/+2
READ_IMPLIES_EXEC READ_IMPLIES_EXEC must be set when: o binary _is_ an executable stack (i.e. not EXSTACK_DISABLE_X) o processor architecture is _under_ ARMv6 (XN bit is supported from ARMv6) Signed-off-by: Makito SHIOKAWA <lkhmkt@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19[S390] fix "mem=" handling in case of standby memoryHeiko Carstens2-2/+9
Standby memory detected with the sclp interface gets always registered with add_memory calls without considering the limitationt that the "mem=" kernel paramater implies. So fix this and only register standby memory that is below the specified limit. This fixes zfcpdump since it uses "mem=32M". In case there is appr. 2GB standby memory present all of usable memory would be used for the struct pages needed for standby memory. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-02-19[S390] Fix timeval regression on s390Christian Borntraeger1-1/+1
commit aa5e97ce4bbc9d5daeec16b1d15bb3f6b7b4f4d4 [PATCH] improve precision of process accounting. Introduced a timing regression: -bash-3.2# time ls real 0m0.006s user 0m1.754s sys 0m1.094s The problem was introduced by an error in cputime_to_timeval. Cputime is now 1/4096 microsecond, therefore, we have to divide the remainder with 4096 to get the microseconds. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-02-19[ARM] omap: fix clock reparenting in omap2_clk_set_parent()Russell King1-4/+4
When changing the parent of a clock, it is necessary to keep the clock use counts balanced otherwise things the parent state will get corrupted. Since we already disable and re-enable the clock, we might as well use the recursive versions instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-19[ARM] 5402/1: fix a case of wrap-around in sanity_check_meminfo()Nicolas Pitre1-1/+2
In the non highmem case, if two memory banks of 1GB each are provided, the second bank would evade suppression since its virtual base would be 0. Fix this by disallowing any memory bank which virtual base address is found to be lower than PAGE_OFFSET. Reported-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-18mm: fix memmap init for handling memory holeKAMEZAWA Hiroyuki1-1/+1
Now, early_pfn_in_nid(PFN, NID) may returns false if PFN is a hole. and memmap initialization was not done. This was a trouble for sparc boot. To fix this, the PFN should be initialized and marked as PG_reserved. This patch changes early_pfn_in_nid() return true if PFN is a hole. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reported-by: David Miller <davem@davemlloft.net> Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-18mm: clean up for early_pfn_to_nid()KAMEZAWA Hiroyuki5-10/+2
What's happening is that the assertion in mm/page_alloc.c:move_freepages() is triggering: BUG_ON(page_zone(start_page) != page_zone(end_page)); Once I knew this is what was happening, I added some annotations: if (unlikely(page_zone(start_page) != page_zone(end_page))) { printk(KERN_ERR "move_freepages: Bogus zones: " "start_page[%p] end_page[%p] zone[%p]\n", start_page, end_page, zone); printk(KERN_ERR "move_freepages: " "start_zone[%p] end_zone[%p]\n", page_zone(start_page), page_zone(end_page)); printk(KERN_ERR "move_freepages: " "start_pfn[0x%lx] end_pfn[0x%lx]\n", page_to_pfn(start_page), page_to_pfn(end_page)); printk(KERN_ERR "move_freepages: " "start_nid[%d] end_nid[%d]\n", page_to_nid(start_page), page_to_nid(end_page)); ... And here's what I got: move_freepages: Bogus zones: start_page[2207d0000] end_page[2207dffc0] zone[fffff8103effcb00] move_freepages: start_zone[fffff8103effcb00] end_zone[fffff8003fffeb00] move_freepages: start_pfn[0x81f600] end_pfn[0x81f7ff] move_freepages: start_nid[1] end_nid[0] My memory layout on this box is: [ 0.000000] Zone PFN ranges: [ 0.000000] Normal 0x00000000 -> 0x0081ff5d [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[8] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00020000 [ 0.000000] 1: 0x00800000 -> 0x0081f7ff [ 0.000000] 1: 0x0081f800 -> 0x0081fe50 [ 0.000000] 1: 0x0081fed1 -> 0x0081fed8 [ 0.000000] 1: 0x0081feda -> 0x0081fedb [ 0.000000] 1: 0x0081fedd -> 0x0081fee5 [ 0.000000] 1: 0x0081fee7 -> 0x0081ff51 [ 0.000000] 1: 0x0081ff59 -> 0x0081ff5d So it's a block move in that 0x81f600-->0x81f7ff region which triggers the problem. This patch: Declaration of early_pfn_to_nid() is scattered over per-arch include files, and it seems it's complicated to know when the declaration is used. I think it makes fix-for-memmap-init not easy. This patch moves all declaration to include/linux/mm.h After this, if !CONFIG_NODES_POPULATES_NODE_MAP && !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID -> Use static definition in include/linux/mm.h else if !CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID -> Use generic definition in mm/page_alloc.c else -> per-arch back end function will be called. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reported-by: David Miller <davem@davemlloft.net> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x, 2.6.27.x, 2.6.28.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-17x86, mce: fix ifdef for 64bit thermal apic vector clear on shutdownAndi Kleen1-1/+1
Impact: Bugfix The ifdef for the apic clear on shutdown for the 64bit intel thermal vector was incorrect and never triggered. Fix that. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-17x86, mce: use force_sig_info to kill process in machine checkAndi Kleen1-2/+2
Impact: bug fix (with tolerant == 3) do_exit cannot be called directly from the exception handler because it can sleep and the exception handler runs on the exception stack. Use force_sig() instead. Based on a earlier patch by Ying Huang who debugged the problem. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-17x86, mce: reinitialize per cpu features on resumeAndi Kleen1-0/+1
Impact: Bug fix This fixes a long standing bug in the machine check code. On resume the boot CPU wouldn't get its vendor specific state like thermal handling reinitialized. This means the boot cpu wouldn't ever get any thermal events reported again. Call the respective initialization functions on resume v2: Remove ancient init because they don't have a resume device anyways. Pointed out by Thomas Gleixner. v3: Now fix the Subject too to reflect v2 change Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-02-17[ARM] 5401/1: Orion: fix edge triggered GPIO interrupt supportNicolas Pitre5-53/+29
The GPIO interrupts can be configured as either level triggered or edge triggered, with a default of level triggered. When an edge triggered interrupt is requested, the gpio_irq_set_type method is called which currently switches the given IRQ descriptor between two struct irq_chip instances: orion_gpio_irq_level_chip and orion_gpio_irq_edge_chip. This happens via __setup_irq() which also calls irq_chip_set_defaults() to assign default methods to uninitialized ones. The problem is that irq_chip_set_defaults() is called before the irq_chip reference is switched, leaving the new irq_chip (orion_gpio_irq_edge_chip in this case) with uninitialized methods such as chip->startup() causing a kernel oops. Many solutions are possible, such as making irq_chip_set_defaults() global and calling it from gpio_irq_set_type(), or calling __irq_set_trigger() before irq_chip_set_defaults() in __setup_irq(). But those require modifications to the generic IRQ code which might have adverse effect on other architectures, and that would still be a fragile arrangement. Manually copying the missing methods from within gpio_irq_set_type() would be really ugly and it would break again the day new methods with automatic defaults are added. A better solution is to have a single irq_chip instance which can deal with both edge and level triggered interrupts. It is also a good idea to switch the IRQ handler instead, as the edge IRQ handler allows for one edge IRQ event to be queued as the IRQ is actually masked only when that second IRQ is received, at which point the hardware can queue an additional IRQ event, making edge triggered interrupts a bit more reliable. Tested-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-17Merge branch 'tracing-fixes-for-linus' of ↵Linus Torvalds1-22/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: doc: mmiotrace.txt, buffer size control change trace: mmiotrace to the tracer menu in Kconfig mmiotrace: count events lost due to not recording
2009-02-17Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds10-82/+109
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, vm86: fix preemption bug x86, olpc: fix model detection without OFW x86, hpet: fix for LS21 + HPET = boot hang x86: CPA avoid repeated lazy mmu flush x86: warn if arch_flush_lazy_mmu_cpu is called in preemptible context x86/paravirt: make arch_flush_lazy_mmu/cpu disable preemption x86, pat: fix warn_on_once() while mapping 0-1MB range with /dev/mem x86/cpa: make sure cpa is safe to call in lazy mmu mode x86, ptrace, mm: fix double-free on race
2009-02-17Merge branch 'merge' of ↵Linus Torvalds6-7/+14
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/vsx: Fix VSX alignment handler for regs 32-63 powerpc/ps3: Move ps3_mm_add_memory to device_initcall powerpc/mm: Fix numa reserve bootmem page selection powerpc/mm: Fix _PAGE_CHG_MASK to protect _PAGE_SPECIAL
2009-02-17Merge branch 'kvm-updates/2.6.29' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds15-78/+65
* 'kvm-updates/2.6.29' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: Flush volatile msrs before emulating rdmsr KVM: Fix assigned devices circular locking dependency KVM: x86: fix LAPIC pending count calculation KVM: Fix INTx for device assignment KVM: MMU: Map device MMIO as UC in EPT KVM: x86: disable kvmclock on non constant TSC hosts KVM: PIT: fix i8254 pending count read KVM: Fix racy in kvm_free_assigned_irq KVM: Add kvm_arch_sync_events to sync with asynchronize events KVM: mmu_notifiers release method KVM: Avoid using CONFIG_ in userspace visible headers KVM: ia64: fix fp fault/trap handler
2009-02-17x86, rcu: fix strange load average and ksoftirqd behaviorPaul E. McKenney1-3/+0
Damien Wyart reported high ksoftirqd CPU usage (20%) on an otherwise idle system. The function-graph trace Damien provided: > 799.521187 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.521371 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.521555 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.521738 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.521934 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.522068 | 1) ksoftir-2324 | | rcu_check_callbacks() { > 799.522208 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.522392 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.522575 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.522759 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.522956 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.523074 | 1) ksoftir-2324 | | rcu_check_callbacks() { > 799.523214 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.523397 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.523579 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.523762 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.523960 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.524079 | 1) ksoftir-2324 | | rcu_check_callbacks() { > 799.524220 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.524403 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.524587 | 1) <idle>-0 | | rcu_check_callbacks() { > 799.524770 | 1) <idle>-0 | | rcu_check_callbacks() { > [ . . . ] Shows rcu_check_callbacks() being invoked way too often. It should be called once per jiffy, and here it is called no less than 22 times in about 3.5 milliseconds, meaning one call every 160 microseconds or so. Why do we need to call rcu_pending() and rcu_check_callbacks() from the idle loop of 32-bit x86, especially given that no other architecture does this? The following patch removes the call to rcu_pending() and rcu_check_callbacks() from the x86 32-bit idle loop in order to reduce the softirq load on idle systems. Reported-by: Damien Wyart <damien.wyart@free.fr> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-16[ARM] 5400/1: Add support for inverted rdy_busy pin for Atmel nand device ↵Gregory CLEMENT2-0/+2
controller Add support for inverted rdy_busy pin for Atmel nand device controller It will fix building error on NeoCore926 board. Acked-by: Andrew Victor <linux@maxim.org.za> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gregory CLEMENT <gclement@adeneo.adetelgroup.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-16cpumask: Use cpu_*_mask accessors code: alphaRusty Russell2-10/+10
Impact: use new API, fix SMP bug. Use the new accessors rather than frobbing bits directly. This also removes the bug introduced in ee0c468b (alpha: compile fixes) which had Alpha setting bits on an on-stack cpumask, not the cpu_online_map. Cc: Richard Henderson <rth@twiddle.net> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Ingo Molnar <mingo@elte.hu>
2009-02-16cpumask: fix powernow-k8: partial revert of ↵Rusty Russell1-5/+7
2fdf66b491ac706657946442789ec644cc317e1a Impact: fix powernow-k8 when acpi=off (or other error). There was a spurious change introduced into powernow-k8 in this patch: so that we try to "restore" the cpus_allowed we never saved. We revert that file. See lkml "[PATCH] x86/powernow: fix cpus_allowed brokage when acpi=off" from Yinghai for the bug report. Cc: Mike Travis <travis@sgi.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Ingo Molnar <mingo@elte.hu>
2009-02-15trace: mmiotrace to the tracer menu in KconfigPekka Paalanen1-22/+2
Impact: cosmetic change in Kconfig menu layout This patch was originally suggested by Peter Zijlstra, but seems it was forgotten. CONFIG_MMIOTRACE and CONFIG_MMIOTRACE_TEST were selectable directly under the Kernel hacking / debugging menu in the kernel configuration system. They were present only for x86 and x86_64. Other tracers that use the ftrace tracing framework are in their own sub-menu. This patch moves the mmiotrace configuration options there. Since the Kconfig file, where the tracer menu is, is not architecture specific, HAVE_MMIOTRACE_SUPPORT is introduced and provided only by x86/x86_64. CONFIG_MMIOTRACE now depends on it. Signed-off-by: Pekka Paalanen <pq@iki.fi> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-15x86, vm86: fix preemption bugThomas Gleixner1-1/+9
Commit 3d2a71a596bd9c761c8487a2178e95f8a61da083 ("x86, traps: converge do_debug handlers") changed the preemption disable logic of do_debug() so vm86_handle_trap() is called with preemption disabled resulting in: BUG: sleeping function called from invalid context at include/linux/kernel.h:155 in_atomic(): 1, irqs_disabled(): 0, pid: 3005, name: dosemu.bin Pid: 3005, comm: dosemu.bin Tainted: G W 2.6.29-rc1 #51 Call Trace: [<c050d669>] copy_to_user+0x33/0x108 [<c04181f4>] save_v86_state+0x65/0x149 [<c0418531>] handle_vm86_trap+0x20/0x8f [<c064e345>] do_debug+0x15b/0x1a4 [<c064df1f>] debug_stack_correct+0x27/0x2c [<c040365b>] sysenter_do_call+0x12/0x2f BUG: scheduling while atomic: dosemu.bin/3005/0x10000001 Restore the original calling convention and reenable preemption before calling handle_vm86_trap(). Reported-by: Michal Suchanek <hramrach@centrum.cz> Cc: stable@kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-04 19:32:44 +0000