summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2013-02-08ARM: DMA mapping: fix bad atomic testRussell King1-1/+1
Realview fails to boot with this warning: BUG: spinlock lockup suspected on CPU#0, init/1 lock: 0xcf8bde10, .magic: dead4ead, .owner: init/1, .owner_cpu: 0 Backtrace: [<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:cf8bde10 r5:cf83d1c0 r4:cf8bde10 r3:cf83d1c0 [<c03294d0>] (dump_stack+0x0/0x1c) from [<c018926c>] (spin_dump+0x84/0x98) [<c01891e8>] (spin_dump+0x0/0x98) from [<c0189460>] (do_raw_spin_lock+0x100/0x198) [<c0189360>] (do_raw_spin_lock+0x0/0x198) from [<c032cbac>] (_raw_spin_lock+0x3c/0x44) [<c032cb70>] (_raw_spin_lock+0x0/0x44) from [<c01c9224>] (pl011_console_write+0xe8/0x11c) [<c01c913c>] (pl011_console_write+0x0/0x11c) from [<c002aea8>] (call_console_drivers.clone.7+0xdc/0x104) [<c002adcc>] (call_console_drivers.clone.7+0x0/0x104) from [<c002b320>] (console_unlock+0x2e8/0x454) [<c002b038>] (console_unlock+0x0/0x454) from [<c002b8b4>] (vprintk_emit+0x2d8/0x594) [<c002b5dc>] (vprintk_emit+0x0/0x594) from [<c0329718>] (printk+0x3c/0x44) [<c03296dc>] (printk+0x0/0x44) from [<c002929c>] (warn_slowpath_common+0x28/0x6c) [<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c) [<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c0070ab0>] (lockdep_trace_alloc+0xd8/0xf0) [<c00709d8>] (lockdep_trace_alloc+0x0/0xf0) from [<c00c0850>] (kmem_cache_alloc+0x24/0x11c) [<c00c082c>] (kmem_cache_alloc+0x0/0x11c) from [<c00bb044>] (__get_vm_area_node.clone.24+0x7c/0x16c) [<c00bafc8>] (__get_vm_area_node.clone.24+0x0/0x16c) from [<c00bb7b8>] (get_vm_area_caller+0x48/0x54) [<c00bb770>] (get_vm_area_caller+0x0/0x54) from [<c0020064>] (__alloc_remap_buffer.clone.15+0x38/0xb8) [<c002002c>] (__alloc_remap_buffer.clone.15+0x0/0xb8) from [<c0020244>] (__dma_alloc+0x160/0x2c8) [<c00200e4>] (__dma_alloc+0x0/0x2c8) from [<c00204d8>] (arm_dma_alloc+0x88/0xa0)[<c0020450>] (arm_dma_alloc+0x0/0xa0) from [<c00beb00>] (dma_pool_alloc+0xcc/0x1a8) [<c00bea34>] (dma_pool_alloc+0x0/0x1a8) from [<c01a9d14>] (pl08x_fill_llis_for_desc+0x28/0x568) [<c01a9cec>] (pl08x_fill_llis_for_desc+0x0/0x568) from [<c01aab8c>] (pl08x_prep_slave_sg+0x258/0x3b0) [<c01aa934>] (pl08x_prep_slave_sg+0x0/0x3b0) from [<c01c9f74>] (pl011_dma_tx_refill+0x140/0x288) [<c01c9e34>] (pl011_dma_tx_refill+0x0/0x288) from [<c01ca748>] (pl011_start_tx+0xe4/0x120) [<c01ca664>] (pl011_start_tx+0x0/0x120) from [<c01c54a4>] (__uart_start+0x48/0x4c) [<c01c545c>] (__uart_start+0x0/0x4c) from [<c01c632c>] (uart_start+0x2c/0x3c) [<c01c6300>] (uart_start+0x0/0x3c) from [<c01c795c>] (uart_write+0xcc/0xf4) [<c01c7890>] (uart_write+0x0/0xf4) from [<c01b0384>] (n_tty_write+0x1c0/0x3e4) [<c01b01c4>] (n_tty_write+0x0/0x3e4) from [<c01acfe8>] (tty_write+0x144/0x240) [<c01acea4>] (tty_write+0x0/0x240) from [<c01ad17c>] (redirected_tty_write+0x98/0xac) [<c01ad0e4>] (redirected_tty_write+0x0/0xac) from [<c00c371c>] (vfs_write+0xbc/0x150) [<c00c3660>] (vfs_write+0x0/0x150) from [<c00c39c0>] (sys_write+0x4c/0x78) [<c00c3974>] (sys_write+0x0/0x78) from [<c0014460>] (ret_fast_syscall+0x0/0x3c) This happens because the DMA allocation code is not respecting atomic allocations correctly. GFP flags should not be tested for GFP_ATOMIC to determine if an atomic allocation is being requested. GFP_ATOMIC is not a flag but a value. The GFP bitmask flags are all prefixed with __GFP_. The rest of the kernel tests for __GFP_WAIT not being set to indicate an atomic allocation. We need to do the same. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-08ARM: realview: ensure that we have sufficient IRQs availableRussell King1-1/+1
Realview EB with a rev B MPcore tile results in lots of warnings at boot because it can't allocate enough IRQs. Fix this by increasing the number of available IRQs. WARNING: at /home/rmk/git/linux-rmk/arch/arm/common/gic.c:757 gic_init_bases+0x12c/0x2ec() Cannot allocate irq_descs @ IRQ96, assuming pre-allocated Modules linked in: Backtrace: [<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000002f5 r5:c042c62c r4:c044ff40 r3:c045f240 [<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c) [<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029384>] (warn_slowpath_fmt+0x38/0x40) [<c002934c>] (warn_slowpath_fmt+0x0/0x40) from [<c042c62c>] (gic_init_bases+0x12c/0x2ec) [<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8) [<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24) [<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300) [<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070) ---[ end trace 1b75b31a2719ed1c ]--- ------------[ cut here ]------------ WARNING: at /home/rmk/git/linux-rmk/kernel/irq/irqdomain.c:234 irq_domain_add_legacy+0x80/0x140() Modules linked in: Backtrace: [<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000000ea r5:c0081a38 r4:00000000 r3:c045f240 [<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c) [<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c) [<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c0081a38>] (irq_domain_add_legacy+0x80/0x140) [<c00819b8>] (irq_domain_add_legacy+0x0/0x140) from [<c042c64c>] (gic_init_bases+0x14c/0x2ec) [<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8) [<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24) [<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300) [<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070) ---[ end trace 1b75b31a2719ed1d ]--- ------------[ cut here ]------------ WARNING: at /home/rmk/git/linux-rmk/arch/arm/common/gic.c:762 gic_init_bases+0x170/0x2ec() Modules linked in: Backtrace: [<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000002fa r5:c042c670 r4:00000000 r3:c045f240 [<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c) [<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c) [<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c042c670>] (gic_init_bases+0x170/0x2ec) [<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8) [<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24) [<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300) [<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070) ---[ end trace 1b75b31a2719ed1e ]--- Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-08ARM: GIC: fix GIC cpumask initializationRussell King1-2/+23
Punit Agrawal reports: > I was trying to boot 3.8-rc5 on Realview EB 11MPCore using > realview-smp_defconfig as a starting point but the kernel failed to > progress past the log below (config attached). > > Pawel suggested I try reverting 384a290283f - "ARM: gic: use a private > mapping for CPU target interfaces" that you've authored. With this > commit reverted the kernel boots. > > I am not quite sure why the commit breaks 11MPCore but Pawel (cc'd) > might be able to shed light on that. Some early GIC implementations return zero for the first distributor CPU routing register. This means we can't rely on that telling us which CPU interface we're connected to. We know that these platforms implement PPIs for IRQs 29-31 - but we shouldn't assume that these will always be populated. So, instead, scan for a non-zero CPU routing register in the first 32 IRQs and use that as our CPU mask. Reported-by: Punit Agrawal <punit.agrawal@arm.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-24Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+2
Pull kvm fixlet from Marcelo Tosatti. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Emulate dcbf
2013-01-24Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds6-27/+26
Pull ARM fixes from Russell King: "A number of fixes: Patrik found a problem with preempt counting in the VFP assembly functions which can cause the preempt count to be upset. Nicolas fixed a problem with the parsing of the DT when it straddles a 1MB boundary. Subhash Jadavani reported a problem with sparsemem and our highmem support for cache maintanence for DMA areas, and TI found a bug in their strongly ordered memory mapping type. Also, three fixes by way of Will Deacon's tree from Dave Martin for instruction compatibility and Marc Zyngier to fix hypervisor boot mode issues." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7629/1: mm: Fix missing XN flag for for MT_MEMORY_SO ARM: DMA: Fix struct page iterator in dma_cache_maint() to work with sparsemem ARM: 7628/1: head.S: map one extra section for the ATAG/DTB area ARM: 7627/1: Predicate preempt logic on PREEMP_COUNT not PREEMPT alone ARM: virt: simplify __hyp_stub_install epilog ARM: virt: boot secondary CPUs through the right entry point ARM: virt: Avoid bx instruction for compatibility with <=ARMv4
2013-01-24Merge tag 'fixes-for-linus2' of ↵Linus Torvalds40-180/+176
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Here's a long-pending fixes pull request for arm-soc (I didn't send one in the -rc4 cycle). The larger deltas are from: - A fixup of error paths in the mvsdio driver - Header file move for a driver that hadn't been properly converted to multiplatform on i.MX, which was causing build failures when included - Device tree updates for at91 dealing mostly with their new pinctrl setup merged in 3.8 and mistakes in those initial configs The rest are the normal mix of small fixes all over the place; sunxi, omap, imx, mvebu, etc, etc." * tag 'fixes-for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (40 commits) mfd: vexpress-sysreg: Don't skip initialization on probe ARM: vexpress: Enable A7 cores in V2P-CA15_A7's Device Tree ARM: vexpress: extend the MPIDR range used for pen release check ARM: at91/dts: correct comment in at91sam9x5.dtsi for mii ARM: at91/at91_dt_defconfig: add at91sam9n12 SoC to DT defconfig ARM: at91/at91_dt_defconfig: remove memory specification to cmdline ARM: at91/dts: add macb mii pinctrl config for kizbox ARM: at91: rm9200: remake the BGA as default version ARM: at91: fix gpios on i2c-gpio for RM9200 DT ARM: at91/at91sam9x5 DTS: add SCK USART pins ARM: at91/at91sam9x5 DTS: correct wrong PIO BANK values on u(s)arts ARM: at91/at91-pinctrl documentation: fix typo and add some details ARM: kirkwood: fix missing #interrupt-cells property mmc: mvsdio: use devm_ API to simplify/correct error paths. clk: mvebu/clk-cpu.c: fix memory leakage ARM: OMAP2+: omap4-panda: add UART2 muxing for WiLink shared transport ARM: OMAP2+: DT node Timer iteration fix ARM: OMAP2+: Fix section warning for omap_init_ocp2scp() ARM: OMAP2+: fix build break for omapdrm ARM: OMAP2: Fix missing omap2xxx_clkt_vps_late_init function calls ...
2013-01-24Merge branch 'vexpress/fixes' of git://git.linaro.org/people/pawelmoll/linux ↵Olof Johansson2-3/+1
into fixes From Pawel Moll: - makes the V2P-CA15_A7 (a.k.a. TC2) work with 3.8 kernels - improves vexpress-sysreg.c behaviour on arm64 platforms * 'vexpress/fixes' of git://git.linaro.org/people/pawelmoll/linux: mfd: vexpress-sysreg: Don't skip initialization on probe ARM: vexpress: Enable A7 cores in V2P-CA15_A7's Device Tree ARM: vexpress: extend the MPIDR range used for pen release check
2013-01-24Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesOlof Johansson5-23/+48
From Nicolas Ferre: Here are fixes for AT91 that are mainly related to device tree. One RM9200 setup option is the only C code change. Some documentation changes can clarify the pinctrl use. Then, some defconfig modifications are allowing the affected platforms to boot. * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91/dts: correct comment in at91sam9x5.dtsi for mii ARM: at91/at91_dt_defconfig: add at91sam9n12 SoC to DT defconfig ARM: at91/at91_dt_defconfig: remove memory specification to cmdline ARM: at91/dts: add macb mii pinctrl config for kizbox ARM: at91: rm9200: remake the BGA as default version ARM: at91: fix gpios on i2c-gpio for RM9200 DT ARM: at91/at91sam9x5 DTS: add SCK USART pins ARM: at91/at91sam9x5 DTS: correct wrong PIO BANK values on u(s)arts ARM: at91/at91-pinctrl documentation: fix typo and add some details
2013-01-24ARM: vexpress: Enable A7 cores in V2P-CA15_A7's Device TreePawel Moll1-2/+0
As the kernel is able to cope with multiple clusters, uncomment the A7 cores in the Device Tree for V2P-CA15_A7 tile, making all 5 cores available to the user. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2013-01-24ARM: vexpress: extend the MPIDR range used for pen release checkLorenzo Pieralisi1-1/+1
In ARM multi-cluster systems the MPIDR affinity level 0 cannot be used as a single cpu identifier, affinity levels 1 and 2 must be taken into account as well. This patch extends the MPIDR usage to affinity levels 1 and 2 in versatile secondary cores start up code in order to compare the passed pen_release value with the full-blown affinity mask. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2013-01-23Merge tag 'mvebu_fixes_for_v3.8-rc5' of ↵Olof Johansson1-0/+2
git://git.infradead.org/users/jcooper/linux into fixes From Jason Cooper: mvebu fixes for v3.8-rc5 - fix memory leak in mvebu/clk-cpu.c - use devm_ to correct/simplify error paths in mvsdio - add missing #interrupt-cells property in kirkwood * tag 'mvebu_fixes_for_v3.8-rc5' of git://git.infradead.org/users/jcooper/linux: ARM: kirkwood: fix missing #interrupt-cells property mmc: mvsdio: use devm_ API to simplify/correct error paths. clk: mvebu/clk-cpu.c: fix memory leakage
2013-01-23Merge tag 'usb-3.8-rc4' of ↵Linus Torvalds7-22/+24
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull more USB fixes from Greg Kroah-Hartman: "Here are some more USB fixes for the 3.8-rc4 tree. Some gadget driver fixes, and finally resolved the ehci-mxc driver build issues (it's just some code moving around and being deleted)." * tag 'usb-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: EHCI: fix build error in ehci-mxc USB: EHCI: add a name for the platform-private field USB: EHCI: fix incorrect configuration test USB: EHCI: Move definition of EHCI_STATS to ehci.h USB: UHCI: fix IRQ race during initialization usb: gadget: FunctionFS: Fix missing braces in parse_opts usb: dwc3: gadget: fix ep->maxburst for ep0 ARM: i.MX clock: Change the connection-id for fsl-usb2-udc usb: gadget: fsl_mxc_udc: replace MX35_IO_ADDRESS to ioremap usb: gadget: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id usb: musb: cppi_dma: drop '__init' annotation
2013-01-23Merge branch 'for-linus' of ↵Linus Torvalds4-1/+19
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fixes from Geert Uytterhoeven: "The asm-generic changeset has been ack'ed by Arnd." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Wire up finit_module asm-generic/dma-mapping-broken.h: Provide dma_alloc_attrs()/dma_free_attrs() m68k: Provide dma_alloc_attrs()/dma_free_attrs()
2013-01-23Merge tag 'arm64-fixes' of ↵Linus Torvalds1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull arm64 fixes from Catalin Marinas: - ELF coredump fix (more registers dumped than what user space expects) - SUBARCH name generation (s/aarch64/arm64/) * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: makefile: fix uname munging when setting ARCH on native machine arm64: elf: fix core dumping to match what glibc expects
2013-01-23ARM: at91/dts: correct comment in at91sam9x5.dtsi for miiDouglas Gilbert1-8/+8
Concerning pinctrl_macb0_rmii_mii, values were okay, but not comments. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91/at91_dt_defconfig: add at91sam9n12 SoC to DT defconfigNicolas Ferre1-0/+1
Reported-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91/at91_dt_defconfig: remove memory specification to cmdlineNicolas Ferre1-1/+1
No need for this cmdline option as we are using DT. Moreover this defconfig is targeted to multiple SoC/boards: this option was nonsense. Reported-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91/dts: add macb mii pinctrl config for kizboxBoris BREZILLON1-0/+2
This patch overrides default macb pinctrl config defined in at91sam9260.dtsi (pinctrl_macb_rmii) with kizbox board config (pinctrl_macb_rmii + pinctrl_macb_rmii_mii_alt). Signed-off-by: Boris BREZILLON <linux-arm@overkiz.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91: rm9200: remake the BGA as default versionJean-Christophe PLAGNIOL-VILLARD1-0/+2
Make BGA as the default version as we are supposed to just have to specify when we use the PQFP version. Issue was existing since commit: 3e90772 (ARM: at91: fix at91rm9200 soc subtype handling). Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: stable <stable@vger.kernel.org> [v3.3] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91: fix gpios on i2c-gpio for RM9200 DTJoachim Eastwood1-2/+2
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91/at91sam9x5 DTS: add SCK USART pinsRichard Genoud1-0/+20
The SCK pins where missing in usarts pinctrl. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: at91/at91sam9x5 DTS: correct wrong PIO BANK values on u(s)artsRichard Genoud1-12/+12
The PIN_BANK 3 is for PDxx pins, not PCxx pins. And PIN_BANK 1 is for PBxx, not PIN_BANK 0. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-01-23ARM: kirkwood: fix missing #interrupt-cells propertySebastian Hesselbarth1-0/+2
The gpio controller on kirkwood can provide interrupts but is missing the #interrupt-cells property. This patch just adds it to both gpio controllers. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-22Merge tag 'perf-urgent-for-mingo' of ↵Linus Torvalds1-6/+0
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf/urgent fixes from Arnaldo Carvalho de Melo: . revert 20b279 - require exclude_guest to use PEBS - kernel side, now older binaries will continue working for things like cycles:pp without needing to pass extra modifiers, from David Ahern. . Fix building from 'make perf-*-src-pkg' tarballs, broken by UAPI, from Sebastian Andrzej Siewior [ Pulling directly, Ingo would normally pull but has been unresponsive ] * tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Fix building from 'make perf-*-src-pkg' tarballs perf x86: revert 20b279 - require exclude_guest to use PEBS - kernel side
2013-01-22Merge branch 'for-linus' of ↵Linus Torvalds5-15/+26
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "Improve the stability of the linux kernel on the parisc architecture" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: sigaltstack doesn't round ss.ss_sp as required parisc: improve ptrace support for gdb single-step parisc: don't claim cpu irqs more than once parisc: avoid undefined shift in cnv_float.h
2013-01-22Merge tag 'omap-for-v3.8-rc4/fixes-signed' of ↵Olof Johansson68-214/+562
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Minimal omap fixes for the -rc series: - A build fix for recently merged omap DRM changes - Regression fixes from the common clock framework conversion for omap4 audio and omap2 reboot - Regression fix for pandaboard WLAN control UART muxing caused by u-boot only muxing essential pins nowadays - Timer iteration fix for CONFIG_OF_DYNAMIC - A section mismatch fix for ocp2scp init * tag 'omap-for-v3.8-rc4/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (306 commits) ARM: OMAP2+: omap4-panda: add UART2 muxing for WiLink shared transport ARM: OMAP2+: DT node Timer iteration fix ARM: OMAP2+: Fix section warning for omap_init_ocp2scp() ARM: OMAP2+: fix build break for omapdrm ARM: OMAP2: Fix missing omap2xxx_clkt_vps_late_init function calls ARM: OMAP4: hwmod_data: Correct IDLEMODE for McPDM ARM: OMAP4: clock data: Lock ABE DPLL on all revisions + Linux 3.8-rc4 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-22ptrace: ensure arch_ptrace/ptrace_request can never race with SIGKILLOleg Nesterov1-4/+5
putreg() assumes that the tracee is not running and pt_regs_access() can safely play with its stack. However a killed tracee can return from ptrace_stop() to the low-level asm code and do RESTORE_REST, this means that debugger can actually read/modify the kernel stack until the tracee does SAVE_REST again. set_task_blockstep() can race with SIGKILL too and in some sense this race is even worse, the very fact the tracee can be woken up breaks the logic. As Linus suggested we can clear TASK_WAKEKILL around the arch_ptrace() call, this ensures that nobody can ever wakeup the tracee while the debugger looks at it. Not only this fixes the mentioned problems, we can do some cleanups/simplifications in arch_ptrace() paths. Probably ptrace_unfreeze_traced() needs more callers, for example it makes sense to make the tracee killable for oom-killer before access_process_vm(). While at it, add the comment into may_ptrace_stop() to explain why ptrace_stop() still can't rely on SIGKILL and signal_pending_state(). Reported-by: Salman Qazi <sqazi@google.com> Reported-by: Suleiman Souhlal <suleiman@google.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-22arm64: elf: fix core dumping to match what glibc expectsWill Deacon1-1/+4
The kernel's internal definition of ELF_NGREG uses struct pt_regs, which means that we disagree with userspace on the size of coredumps since glibc correctly uses the user-visible struct user_pt_regs. This patch fixes our ELF_NGREG definition to use struct user_pt_regs and introduces our own ELF_CORE_COPY_REGS to convert between the user and kernel structure definitions. Cc: <stable@vger.kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-01-22Merge tag 'imx-fixes-rc' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Olof Johansson2-43/+1
fixes From Sascha Hauer: ARM i.MX fixes for -rc. This contains a single compilation fix for the CODA driver. * tag 'imx-fixes-rc' of git://git.pengutronix.de/git/imx/linux-2.6: [media] coda: Fix build due to iram.h rename
2013-01-21ARM: OMAP2+: omap4-panda: add UART2 muxing for WiLink shared transportLuciano Coelho1-0/+6
Add the UART2 muxing data to the board file (this used to be, erroneously, done in the bootloader). Cc: stable <stable@vger.kernel.org> [3.7] Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-21ARM: OMAP2+: DT node Timer iteration fixPantelis Antoniou1-6/+2
The iterator correctly handles of_node_put() calls. Remove it before continue'ing the loop. Without this patch you get the following with CONFIG_OF_DYNAMIC set: ERROR: Bad of_node_put() on /ocp/timer@44e31000! [<c001329c>] (unwind_backtrace+0x0/0xe0) from [<c03dd8f0>] (of_node_release+0x2c/0xa0)! [<c03dd8f0>] (of_node_release+0x2c/0xa0) from [<c03ddea0>] (of_find_matching_node_and_match+0x78/0x90)! [<c03ddea0>] (of_find_matching_node_and_match+0x78/0x90) from [<c06d349c>] (omap_get_timer_dt+0x78/0x90)! [<c06d349c>] (omap_get_timer_dt+0x78/0x90) from [<c06d3664>] (omap_dm_timer_init_one.clone.2+0x34/0x2bc)! [<c06d3664>] (omap_dm_timer_init_one.clone.2+0x34/0x2bc) from [<c06d3a2c>] (omap2_gptimer_clocksource_init.clone.4+0x24/0xa8)! [<c06d3a2c>] (omap2_gptimer_clocksource_init.clone.4+0x24/0xa8) from [<c06cca58>] (time_init+0x20/0x30)! [<c06cca58>] (time_init+0x20/0x30) from [<c06c9690>] (start_kernel+0x1a8/0x2fc)! Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Acked-by: Jon Hunter <jon-hunter@ti.com> [tony@atomide.com: updated description per Jon] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-21ARM: OMAP2+: Fix section warning for omap_init_ocp2scp()Tony Lindgren1-1/+1
Otherwise we will get: WARNING: vmlinux.o(.text+0x1d4f0): Section mismatch in reference from the function omap_init_ocp2scp() to the function .init.text:omap_device_build() The function omap_init_ocp2scp() references the function __init omap_device_build(). This is often because omap_init_ocp2scp lacks a __init annotation or the annotation of omap_device_build is wrong. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-21ARM: OMAP2+: fix build break for omapdrmRob Clark1-1/+2
Fixes compile break with 3.8-rc4. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-20ia64: kill thread_matches(), unexport ptrace_check_attach()Oleg Nesterov1-27/+0
The ia64 function "thread_matches()" has no users since commit e868a55c2a8c ("[IA64] remove find_thread_for_addr()"). Remove it. This allows us to make ptrace_check_attach() static to kernel/ptrace.c, which is good since we'll need to change the semantics of it and fix up all the callers. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-19Merge branch 'for-rmk/virt/hyp-boot/fixes' of ↵Russell King305-1068/+1129
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into fixes
2013-01-19ARM: 7629/1: mm: Fix missing XN flag for for MT_MEMORY_SOSantosh Shilimkar1-1/+1
Commit 8fb54284ba6a {ARM: mm: Add strongly ordered descriptor support} added XN flag at section level but missed it at PTE level. Fix it by adding the L_PTE_XN to MT_MEMORY_SO PTE descriptor. Reported-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-19ARM: DMA: Fix struct page iterator in dma_cache_maint() to work with sparsememRussell King1-8/+10
Subhash Jadavani reported this partial backtrace: Now consider this call stack from MMC block driver (this is on the ARMv7 based board): [<c001b50c>] (v7_dma_inv_range+0x30/0x48) from [<c0017b8c>] (dma_cache_maint_page+0x1c4/0x24c) [<c0017b8c>] (dma_cache_maint_page+0x1c4/0x24c) from [<c0017c28>] (___dma_page_cpu_to_dev+0x14/0x1c) [<c0017c28>] (___dma_page_cpu_to_dev+0x14/0x1c) from [<c0017ff8>] (dma_map_sg+0x3c/0x114) This is caused by incrementing the struct page pointer, and running off the end of the sparsemem page array. Fix this by incrementing by pfn instead, and convert the pfn to a struct page. Cc: <stable@vger.kernel.org> Suggested-by: James Bottomley <JBottomley@Parallels.com> Tested-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-18ARM: OMAP2: Fix missing omap2xxx_clkt_vps_late_init function callsJon Hunter2-0/+4
During the migration to the common clock framework, calls to the functions omap2xxx_clkt_vps_late_init() were not preserved for OMAP2420 and OMAP2430. This causes the variables "sys_ck_rate" and "curr_prcm_set" to be uninitialised on boot. On reboot, this causes the following error message to be displayed because the appropriate MPU clock frequency (derived from sys_ck_rate) cannot be found. "Could not set MPU rate to 4294MHz" Fix this by adding back calls to omap2xxx_clkt_vps_late_init() in the OMAP2420 and OMAP2430 clock initialisation code. Signed-off-by: Jon Hunter <jon-hunter@ti.com> [paul@pwsan.com: dropped the duplicated call to omap2xxx_clkt_vps_check_bootloader_rates() after consultation with Jon; updated patch description] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-01-18ARM: OMAP4: hwmod_data: Correct IDLEMODE for McPDMPeter Ujfalusi1-1/+5
McPDM need to be configured to NO_IDLE mode when it is in used otherwise vital clocks will be gated which results 'slow motion' audio playback. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> [paul@pwsan.com: copy patch description into hwmod data comments] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-01-18ARM: OMAP4: clock data: Lock ABE DPLL on all revisionsPeter Ujfalusi1-7/+6
To avoid issues with audio caused by non locked ABE DPLL we should make sure it is locked in all OMAP4 revisions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jon Hunter <jon-hunter@ti.com> [paul@pwsan.com: cleaned up patch description] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-01-18Merge tag 'stable/for-linus-3.8-rc3-tag' of ↵Linus Torvalds2-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen fixes from Konrad Rzeszutek Wilk: - CVE-2013-0190/XSA-40 (or stack corruption for 32-bit PV kernels) - Fix racy vma access spotted by Al Viro - Fix mmap batch ioctl potentially resulting in large O(n) page allcations. - Fix vcpu online/offline BUG:scheduling while atomic.. - Fix unbound buffer scanning for more than 32 vCPUs. - Fix grant table being incorrectly initialized - Fix incorrect check in pciback - Allow privcmd in backend domains. Fix up whitespace conflict due to ugly merge resolution in Xen tree in arch/arm/xen/enlighten.c * tag 'stable/for-linus-3.8-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: Fix stack corruption in xen_failsafe_callback for 32bit PVOPS guests. Revert "xen/smp: Fix CPU online/offline bug triggering a BUG: scheduling while atomic." xen/gntdev: remove erronous use of copy_to_user xen/gntdev: correctly unmap unlinked maps in mmu notifier xen/gntdev: fix unsafe vma access xen/privcmd: Fix mmap batch ioctl. Xen: properly bound buffer access when parsing cpu/*/availability xen/grant-table: correctly initialize grant table version 1 x86/xen : Fix the wrong check in pciback xen/privcmd: Relax access control in privcmd_ioctl_mmap
2013-01-18Merge branch 'for-linus' of ↵Linus Torvalds2-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68knommu arch fixes from Greg Ungerer: "This contains a couple of fixes, both affecting compilation of non-mmu m68k targets." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: fix conditional use of init_pointer_table m68knommu: add KMAP definitions for non-MMU definitions
2013-01-18ARM: i.MX clock: Change the connection-id for fsl-usb2-udcPeter Chen5-15/+15
As we use platform_device_id for fsl-usb2-udc driver, it needs to change clk connection-id, or the related devm_clk_get will be failed. Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18usb: gadget: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_idPeter Chen2-7/+9
As mach/hardware.h is deleted, we need to use platform_device_id to differentiate SoCs. Besides, one cpu_is_mx35 is useless as it has already used pdata to differentiate runtime Meanwhile we update the platform code accordingly. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18KVM: PPC: Emulate dcbfAlexander Graf1-0/+2
Guests can trigger MMIO exits using dcbf. Since we don't emulate cache incoherent MMIO, just do nothing and move on. Reported-by: Ben Collins <ben.c@servergy.com> Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Ben Collins <ben.c@servergy.com> CC: stable@vger.kernel.org
2013-01-17Merge branch 'for-linus' of ↵Linus Torvalds5-8/+33
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 patches from Martin Schwidefsky: "A couple of bug fixes: one of the transparent huge page primitives is broken, the sched_clock function overflows after 417 days, the XFS module has grown too large for -fpic and the new pci code has broken normal channel subsystem notifications." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/chsc: fix SEI usage s390/time: fix sched_clock() overflow s390: use -fPIC for module compile s390/mm: fix pmd_pfn() for thp
2013-01-16Merge branch 'v3.8-samsung-fixes-3' of ↵Olof Johansson269-950/+864
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes From Kukjin Kim: That branch fixes build error for S3C24XX/S3C64xx. And corrects dw-mshc properties on EXYNOS5 DT and fixes IRQ mapping on Cragganmore board. * 'v3.8-samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S3C64XX: Fix up IRQ mapping for balblair on Cragganmore ARM: dts: correct the dw-mshc timing properties as per binding ARM: S3C64XX: Fix build error with CONFIG_S3C_DEV_FB disabled + Linux 3.8-rc3 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-16ARM: S3C64XX: Fix up IRQ mapping for balblair on CragganmoreDimitris Papastamos1-1/+1
We are using S3C_EINT(4) instead of S3C_EINT(5). Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-16ARM: dts: correct the dw-mshc timing properties as per bindingAlim Akhtar2-10/+10
As per the current exynos-dw-mshc bindings, dw-mshc-sdr-timing and dw-mshc-ddr-timing properties are having only two cells, these properties are wrongly set for exynos5250 based cros5250 and smdk5250 platfroms. This patch corrects above timing propreties for above platfroms Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Doug Anderson <dianders@chromium.org> Acked-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-01-16ARM: S3C64XX: Fix build error with CONFIG_S3C_DEV_FB disabledTomasz Figa1-0/+2
If there is no board selecting CONFIG_S3C_DEV_FB enabled, build will fail on arch/arm/mach-s3c64xx/pm.c, where s3c_device_fb is referenced. This patch adds ifdef guard around the code making it compile only when CONFIG_S3C_DEV_FB is enabled. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 01:28:22 +0000